What Can I Use To Prevent Septic Tank From Clogging? (Solution found)

Once the liquid and solid waste are separated, they flow from the tank to the drain field.

  1. Keep up with maintenance. Maintenance is necessary to ensure that your system runs properly.
  2. Don’t flush down foreign objects.
  3. Install more field lines.
  4. Don’t plant trees near your drain field.
  5. Be conservative with water use.

How can I Keep my septic tank from overflowing?

  • Use less water in your home so the septic system can drain properly. Don’t run water in your home unless you have to, or else you could cause the tank to fill up too quickly.

How do you stop a septic tank from clogging?

One of the best things you can do to prevent your septic tank from clogging is to have it pumped on a regular basis. Many septic tanks need to be pumped every three to five years. You can find out how often your septic tank needs to be pumped by having a conversation with your septic tank maintenance professional.

Why does my septic tank keep getting clogged?

A clogged septic tank or drain is caused by a number of things: An obstruction in the line caused by a buildup of pressure between the object and the inner circumference of the pipe. An example is a diaper stuck in the sewer drain line. There is simply too much diaper to fit through the line at once!

Can you put vinegar in septic tank?

Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

  1. Regularly inspect and maintain your septic system.
  2. Pump your septic tank as needed.
  3. Keep your septic tank lids closed and secured.
  4. Be water-wise.
  5. Direct water from land and roof drains away from the drainfield.
  6. Landscape with love.
  7. Keep septic tank lids easily accessible.

How can I increase bacteria in my septic tank naturally?

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How often should you pump your septic tank?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

What can break down poop in septic tank?

Yeast helps actively breaks down waste solids when added to your septic system. Flush ½ cup of dry baking yeast down the toilet, the first time. Add ¼ cup of instant yeast every 4 months, after the initial addition.

How do you dissolve sludge in a septic tank?

One is to inject air into the tank to try and mix the contents and break down the solids. The more common method is to use a mechanical mixer that acts somewhat like a baking mixer where the contents are mixed until they form a slurry that can be withdrawn by the vacuum pump.

How do I increase bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

Is RIDX good for your septic?

How additives, like Rid-x, interfere with your septic system’s eco-system. According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

Do septic tank additives really work?

There is little scientific data to suggest that you should add bacteria or enzymes to your septic system. The United States Environmental Protection Agency reported that biological additives do not appear to improve the performance of healthy septic tanks.

5 Tips That Will Keep Your Septic Tank From Ever Clogging Or Backing Up

In order to function effectively, septic tank systems must maintain an internal balance of bacteria; otherwise, they will fail. Fortunately, there is no mystery as to what you can and cannot do with a septic tank, as long as you follow the guidelines. These five suggestions will help you prevent your septic tank from becoming clogged and to ensure that it continues to perform effectively for many years to come.

Make Sure That You Don’t Put Chemicals down The Drain

Chemicals such as gasoline, paint thinner, and varnish should not be flushed down the toilet since they may easily disrupt the bacterial balance of your septic tank. If this process is interrupted, the sediments in the septic tank will not be broken down. This will result in congestion of your septic tank and, eventually, failure of your system.

Don’t Flush Garbage

It is quite easy to damage your septic tank’s bacterial equilibrium by flushing substances down the toilet, such as gasoline, paint thinner, or varnish down the toilet. Solids in the septic tank will not decompose if this process is interrupted. Eventually, this will result in the congestion of your septic tank and its failure.

Make Sure You Protect the Drain Field

The drain field of your septic tank is critical to the operation of the system since the wastewater must be sent to a treatment facility. Tree roots can cause the drain field to get dislodged, resulting in the water not being able to be effectively absorbed. You should never drive across a drain field. Make certain that there is nothing on the drain field other than grass.

Never Ever Skip Maintenance or Septic Tank Pumping

Although it may seem apparent to some, there are some tasks that may be pushed off until a later date in terms of upkeep. If you fail to get your car’s oil changed by the required date, the engine will not fail on you at the worst possible time. If, on the other hand, you put off getting your septic tank pumped, there is a very good risk that your tank will become blocked eventually. According to the website of Kamloops Septic Service, there are ecologically safe chemicals and treatments that you can put to your tank that will prevent a stinky mess from resurfacing in the future.

Avoid Using Large Amount of Water

A huge amount of water entering the drain field at once might cause it to become saturated. Because it will slow down wastewater absorption, it is possible that a clog will develop as a result of this. Hot tubs and other similar appliances are capable of causing this issue. Additionally, taking precautions such as scheduling showers throughout the day and staggering laundry loads will help to avoid it from occurring. It is important to follow these recommendations to ensure that your septic system does not become clogged or backup.

If you make one mistake, it may easily cost you a significant amount of money to have the damage repaired.

Vinegar has a variety of applications.

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

Please view our entire disclaimer here if you have any questions. Listed in:DIY,Tipsaholic,Home Improvement How To, Cleaning, Home, How To, Cleaning, Tips

How to Get Rid of Septic Tank Clogs

Drain fields can get saturated if there is a substantial amount of water flowing in quickly. It is possible that a clog will form as a result of this since it will slow down wastewater absorption. Hot tubs, for example, can contribute to the development of this condition. It may also be avoided by doing things such as scheduling showers throughout the day and staggered laundry loads throughout the day. Following these recommendations will go a long way toward ensuring that your septic system never develops a blockage or backlog.

Trying to repair the damage caused by one error can quickly cost you a lot of money.

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.

TIPS AHOLIC FILED UNDER:DIY How To, cleaning, home, How To, cleaning, home, tips

3 Tips for Preventing Clogs in Your Sewer Line and Septic System

A clogged drain will inevitably occur from time to time, especially if you have children who aren’t careful about what they pour down the sink or flush down the toilet. When you see that your septic system is clogging up on a regular basis, it’s time to examine your septic system’s maintenance procedures to determine what is causing the problem. Clogged drains and sewage backups may be prevented by performing frequent tank cleaning and performing proper maintenance on your equipment and systems.

Put Only Toilet Paper in the Toilet

Toilet paper disintegrates far more quickly than other types of paper goods. Some varieties of paper towels are so strong that they are virtually as strong as cloth in some situations. They take a long time to disintegrate, and during that time, the paper continues to accumulate, eventually causing a blockage. If you flush paper towels or wet wipes down the toilet on a regular basis, your sewage drain is at greater risk of clogging, especially if there are any roots in the line that might trap the paper.

The accumulation of waste causes you to empty the tank more frequently than you would if you disposed of face tissues, wet wipes, and paper towels in the garbage rather than in the toilet.

Keep Grease out of the Sink Drain

Grease is detrimental to the health of your drains and septic tank. When grease is warm, it seems to be a liquid, but as soon as it is allowed to cool and solidify in your drain, it becomes sticky and difficult to remove. As it clings to the edges of your drain, it collects additional material that floats by, eventually causing a blockage. It’s rare that hot water from the faucet is sufficient to melt and harm an obstruction made of oil and fat. It’s possible to try boiling some water on the stove and pouring it down your drain to see if that helps to dissolve the clog, but the most effective way to remove grease buildup from drains is to hire a plumber who will blast it away with a powerful jet of water that scrubs the sides of the drain completely clean.

Keeping grease out of your drain is even more critical if your home is equipped with a septic tank. Grease floats in the tank, and when a large amount of grease accumulates, it can pour into the drain field, blocking the pipes and causing damage that could be costly to fix in the future.

Call for Help When Your Drains Become Slow

The first sign of a blockage in the sewage line or a full tank is when the drains in your home take an unusually long time to empty themselves. Calling professional drain cleaning or tank pumping as soon as you observe sluggish drains is preferable to waiting for more significant problems to manifest themselves. If only the kitchen sink is sluggish, it is possible that the cause is a blockage in the sink drainage system. When all of the drains and the toilet are running slowly, this is an indication of a sewer blockage that must be addressed immediately.

  • Having a problem with roots will necessitate the need to have the drain snaked out every time they reappear, otherwise the roots might cause the pipe to burst.
  • A plumber can check the level of sludge in the tank to determine whether or not the tank needs to be pumped.
  • In most cases, tree roots can be removed with a sewer snake, but in certain cases, a strong hydro-jet is required to completely clear the line of debris.
  • Bush can provide professional examination of any drain blockage, sluggish drains, or overflowing septic tank, as well as timely treatment to restore your drains to working order.

Prevent Clogging Your Septic Tank

If you are like the majority of householders, you probably don’t pay much consideration to what happens to the garbage that goes down your drain. The opposite is true for those who utilize an on-site septic system to treat and dispose of their household waste water. What you do not know can be detrimental to you, your family, and your financial well-being. Domestic waste that has not been appropriately handled might enter the ground water when a septic system fails. Bacteria and viruses derived from human feces can cause dysentery, hepatitis, and a variety of other ailments that are potentially fatal.

Septic systems require just the most basic of preventative maintenance, which is quite inexpensive when compared to the expense of installing a new system.

Remember that your septic system is not intended to be used as a trash can, so do not flush any of the things listed below down your toilet.

  • Baby wipes, dental floss, feminine hygiene products, condoms, diapers, cotton swabs, cigarette butts, and other such items are available.
  • Matches
  • Grinds from a cup of coffee litter for cats
  • A roll of paper towels
  • Napkins
  • Medications
  • Paints, insecticides, and other potentially harmful substances are introduced into your system.

It has been a long-standing concern in the management of on-site treatment systems to deal with tree root invasion of septic tanks and absorption fields. As a result of their ability to offer air space, water, and nutrients, many trees and shrubs rapidly infiltrate these systems. Not all trees and plants pose a threat to septic tanks. Make certain that no trees are planted in close proximity to the drain field or septic tank. The most effective approach to treat your septic system throughout the year is to use bio products, which naturally dissolve the volume of sludge and scum in the system and allow it to function properly.

The treatment should be repeated twice a month if your family consists of more than four members, as suggested.

They contain billions of germs, and when they feed, the quantity of bacteria in their bodies doubles every 30 minutes!

They were not stopped by gravity.

If you’ve tried everything and you still have a clogged septic line, it’s definitely time to bring in an inspector to figure out what’s wrong with your system. I hope this has been of use to existing and prospective property owners who have a septic system. Your feedback is greatly appreciated!

3 Things to Prevent Septic System Drain Blockage in Your Home

Septic systems are a prevalent feature in many homes in the United States. As a technique of disposing of and treating residential sewage, they are used by around 21 million, or approximately one-fifth, of all houses in the United States. If you have recently purchased a property that has a septic system, or if you have recently acquired a septic system for your present home, you may be unclear of what you should do in terms of septic system maintenance and repair. When the drains that feed your wastewater into the septic tank get blocked, it is one of the most common and inconvenient problems that may occur with septic systems.

  1. Not only is this a sloppy and foul-smelling mess, but it may also be a major health threat due to the contaminants.
  2. In order to prevent your septic drains from being clogged in the future, you must do the following three steps.
  3. Be aware of what you should flush or wash down.
  4. Diapers, cat litter, feminine hygiene products, and cigarette butts are some of the items that are regularly found in clogged drains.
  5. Another source of blockage is grease that is washed down the drain through the kitchen sink or dishwasher.
  6. Scrape any traces of grease off of greasy things before soaking them in hot water.
  7. Make use of filters in your plugholes and shower grates to keep them from washing into your drains and sewer system.
See also:  What Does Permit To Discharge Mean For Septic Tank? (Best solution)

Other household materials such as chemicals and gasoline can also cause drain blockage.

Prepare Your Septic System for the Winter Another major reason of clogged septic system drains is the cold temperatures seen throughout the winter months.

In the event of any of these problems, your wastewater will be sent back into your house.

Hire a professional plumber who specializes in septic systems to inspect your system and determine whether or not it is capable of withstanding the harshness of winter weather conditions.

3.

Even if you take the following precautionary precautions, your septic system is still at danger of being clogged if it is not maintained on a regular basis by specialists.

Regular maintenance inspections will also assess other components of the system, including as inlets, outlets, distribution boxes, and percolators, for accumulations of debris or damage, as well as the overall condition of the system.

If you want assistance or advice on your recently purchased septic system, or if you would like to book your first maintenance visit, please call the friendly and knowledgeable staff at Eckmayer Inc.

We are experts in the pumping and maintenance of septic systems, and we will work with you to ensure that your system is in peak operating condition.

SEPTIC PROBLEMS THAT CAN MIMIC DRAIN CLOGS

Your bathroom drains may be running slowly, and you may be thinking pouring some chemical drain cleaner down the drain to clear the clog. However, in these situations, rather than relying on potentially harmful drugs, it is always preferable to consult with medical specialists for a diagnosis. Instead of a simple clogged drain, you may be dealing with a plumbing vent problem, a sewer line problem, or a septic system problem instead. Learn about three septic issues that might manifest themselves in ways that are similar to drain obstructions.

  1. An entrance baffle and an output baffle are standard features of a septic tank.
  2. The intake baffle assists in the smooth entry of wastewater into the tank.
  3. This form of obstruction, like a drain clog, will cause drains to slow down or stop completely.
  4. 2.
  5. In addition, there is the pipe that runs from your house to the septic system.
  6. In addition to blockages, this main line is subject to earthquake damage, damage from huge machinery being driven over the region, and tree root damage, no matter what material it is constructed of.
  7. Failure of the Drainfield It is possible that some homeowners are unaware that septic systems have a limited lifespan.

For this reason, you must have a reserve leach field site set aside when installing your sewer system, as mandated by federal laws.

One occurs when a large amount of solid waste is introduced into your system, causing them to get clogged to the point where they must be replaced.

Compaction is another issue that can cause a leach field to fail prematurely if it is not addressed.

Due to the fact that the field’s functioning is dependent in part on bacteria that require air in the soil to survive, this might render the region unusable.

Some of the symptoms of these three septic illnesses might be mistaken for those of a normal plugged drain in some cases.

Consequently, if you feel your drains are slowing down, get a professional to come out and take care of the problem.

Contact Upstate Septic Tank, LLC as soon as possible if you are in need of a diagnostic visit, sewer line cleaning, or a septic system cleaning and pumping. We’ll be pleased to assist you in keeping your septic system in the best possible condition.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

  1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.
  • Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
  • However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.
  • The blockage might be located anywhere along the drain line between the septic tank and your home if the water level is below the entrance pipe. If the water level is higher than the inlet but there is nothing obstructing the end of the pipe, the blockage is most likely in the leach field. A shovel or a pry bar may be required to raise the access lid
  • However, this is not always necessary.
  • If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.
  • Advertisement
  • s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.
  • Advertisement
  • s3 If the clog is deeper inside the pipe, the pole or stick should be used to probe the end of the pipe with the pole or stick. As far as you possibly can, insert the end of the stick or pole that you’re using into the pipe’s end. Make use of the end of your probe to scrape the edges of the pipe and remove any waste from the pipe into your tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water to flow again. It is likely that the clog is located farther inside the pipe if water does not flow out of it.
  • 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.
  • If at all possible, take a shower or bath as soon as possible after working on your septic tank
  • When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.
  • 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.
  • Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.
  • 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.
  • Professional service should be utilized. If your tank was full, you should get it pumped within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank has been full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through phone or email. You should try to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid flowing back up the pipes. In order to prevent scum from reentering your pipes, the technician will drain your septic tank.
  1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.
  • If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.
  • 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.
  • It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
  • 3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.
  • It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.
  • 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it
  • If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.
  • Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.
  • It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.
  • 6 Clean the tools with a solution made up of 5 parts water and 1 part chlorine bleach. Pour 1 part chlorine bleach and 5 parts clean water into a bucket and mix to combine the two solutions. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished
  • Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.
  1. 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement
  1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
  2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.
  • Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.
  • As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
  • 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.
  • It will also save you money on your utility bills if you keep your water consumption to a minimum.
  • 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.
  • Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.
  • 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping
  • Not every septic system will be equipped with an effluent filter
  • However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.
  1. 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement
See also:  How Large Of A Hole To Pump A Septic Tank? (Correct answer)

Create a new question

  • Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
  • Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
  • Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
  • They are available.

Question The location of your septic tank is important to know. David Balkan is a writer and musician from the United Kingdom. Professional PlumberCEO of Balkan SewerWater Main Construction David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other roles. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines.

  1. It is because of his expertise and solution-oriented attitude that Balkan Sewer and Water Main Service has grown to become the largest and most trusted service in New York City, and he was named to Angie’s List’s 2017 Super Service Awards list.
  2. The quickest and most straightforward method is to find your primary house trap or clean out.
  3. The equipment that experts employ are available once you have identified your primary cleaner or trap.
  4. Excess Rid X will have no negative consequences.
  5. The Kirbys (Daniel and Robin Kirby) provided the community response.
  6. Consequently, your field lines will be inundated as a result of the water sitting directly on top of them.
  7. This problem may be solved by building up an artificial hill at the field line and sloping it down to normal grade for about two feet on both sides of the field line.

Many years of experience were evident in the man who performed septic system maintenance on our property.

When I buy the store brand (79 cents a packet), I only have to flush a handful of packets every month.

Question What is the best product to use in the toilet to protect my septic system from harm?

This is due to a shortage of oxygen in the tank.

Although this is the case, treatment plants should be pumped out at least once every three months rather than once every six months.

A plastic drain snake is what I choose to utilize for my own purposes.

While they are inexpensive and quite effective, they are also a bit dirty.

The septic system should not be polluted with grease or oil.

Using a grease can, collect the waste and dispose of it properly. Regarding bleach, it destroys the microorganisms that your septic system requires to decompose the waste it receives. Look into septic-safe cleaning products if you haven’t already;

  • Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Advertisement

Things You’ll Need

  • Hose
  • Paper towel
  • Mechanical auger
  • Safety glasses
  • Work gloves

About This Article

The writers of this page have together authored a page that has been read 315,435 times.

Did this article help you?

The proper operation of your septic system is critical to the continued operation of your facility. Septic systems, when properly designed, managed, and maintained, may be an outstanding wastewater treatment alternative for your company’s wastewater. You should learn how to avoid these issues so that you may avoid contamination or other plumbing troubles from occurring.

What are septic systems and how do they work?

Septic tanks are the most important component of the wastewater treatment system, since they are responsible for breaking down waste generated by your plumbing fixtures. Waste is stored in a big tank and is treated using both natural and artificial procedures to reduce its toxicity. It is the responsibility of the tank operator to ensure that liquid and solid waste are properly separated.

See also:  How To Properly Decommission A Fiberglass Septic Tank? (Solved)

1. Keep up with maintenance

Maintenance is required to guarantee that your system continues to operate effectively. Plan regular inspections with a contractor that can provide you with information on the level of scum and effluent in the septic tank, as well as the presence of sludge layers in the tank. This check will provide you with an idea of how frequently you should pump your water. If you do not get your tank pumped on a regular basis, you run the danger of damaging groundwater with a sewage leak.

2. Don’t flush down foreign objects

Commercial facilities have less control over the types of waste that are flushed down the toilet. While it is more difficult to manage in a commercial setting than in a domestic one, it is critical to establish the following rule: only human waste and toilet paper should be flushed down the toilet. Septic systems may become blocked by a variety of substances including wipes, hair, grease, and more. You want to avoid these time-consuming and expensive difficulties as much as possible.

3. Install more field lines

The purified water from the septic tanks is discharged into the drain field system. The trenches are often coated with gravel beneath the surface, and they are typically a succession of trenches connected together. When water passes through, the gravel and dirt operate as a natural biological filter, removing harmful bacteria. The installation of more field lines will provide the water with more places to go, allowing it to breathe a little easier.

4. Don’t plant trees near your drain field

Tree roots have the ability to shift the position of your septic tank, resulting in a clog and overflow of your system. While it is hard to forecast the direction of root development, you may minimize the likelihood of this occurring by placing trees and vegetation far enough away from the drain field and drain pipes to prevent it from happening.

5. Be conservative with water use

When a large amount of water enters the septic tank at the same time, it can cause wastewater to back up into drains or to surface to the surface of the earth. Take the following precautions to avoid hydraulic overloading:

  • Check to see that your plumbing fittings are in proper functioning order. This ensures there will be no drips or leaks. Fixtures should be replaced with water-saving toilets and faucets. Dishwashing, laundry, and showers, if they are available in your building, should be scheduled in advance.

Need business plumbing in Knoxville?

Do you have a plumbing emergency? Everything from restroom facilities to septic systems is within our scope of competence. In order to ensure that everything is in proper functioning condition, please contact us online or phone us at (865) 205-9929.

How to keep drain lines and septic tanks working well

Q:I just relocated from a house that was connected to the municipal sewer system to a rural retirement home that is connected to a septic tank. What information can you provide me on septic tanks? At my previous residence, I experienced clogging difficulties in my main drain pipe. What are some best practices to follow when it comes to drain lines in a home, and how can one ensure that they are always in good working order? A: Your drain lines should generally be free of obstructions as they transport water and solid waste to the sewer or septic tank, presuming they have been constructed correctly and with the appropriate degree of slope.

  • Even though some people believe that having more slope is preferable, if you have too much slope, the liquids can outpace the particles as they go down the drain lines.
  • Grease is the most difficult problem that municipal sewage workers and septic-tank pumpers have to deal with, and they would probably agree.
  • You’ll be doing them — and yourself — a favor in the long run.
  • This will aid in reducing the amount of grease that enters your plumbing drains and pipes.
  • In certain cases, items containing active bacteria may be purchased, which will begin to consume the grease that may be covering the insides of your pipes.
  • When it comes to keeping my own drain lines running, I do a couple different things.
  • Upon entering the pipes, this water causes a violent flash flood — particularly in the horizontal drain pipe beneath my basement floor — and will carry almost everything out of the pipes.

Using hot water to dissolve grease is a very simple procedure that may be used instead of purchasing a bacteria product that consumes grease to accomplish the same result.

In an ideal world, the only things that would enter a septic tank would be waste from our bodies and any little food scraps that managed to get past the strainer in our kitchen sink.

Natural bacteria begin to devour the waste at this point.

In the majority of situations, a leach field is a network of pipelines through which wastewater is transferred to an area of well-drained soil that is particularly sandy.

Other bacteria and oxygen work together to detoxify the wastewater in this area.

As a result of its potent nature, bleach may kill the microorganisms that consume trash.

Pumping the septic tank every two or three years is essential for the health of the system.

You’ll need to be aware of the position of the opening that allows the technician access to the tank during the inspection. More than three decades have elapsed since Tim Carter began his career as a home-improvement specialist. Visit AsktheBuilder.com to ask a query or to find out more information.

4 Things to Stop Flushing Into Your Septic Tank

Did you have obstructions in your septic tank or require repairs this year? What you flush down your toilet might be a contributing factor to the issue. Being aware of what should be flushed and what should not be flushed might assist you in maintaining your septic system. These suggestions will assist you in changing your behaviors and preventing septic tank blockages in the future. In order for solids to be broken down and turned into liquids in septic tanks, bacteria must be present. Antibiotics, for example, might kill off beneficial bacteria, causing the breakdown of sediments to be slower than it should be and requiring your tank to be pumped more frequently than necessary.

  • In the event that you are unsure of what to deal with your remaining medication after you have completed taking it, consult your pharmacist.
  • Many things are promoted as flushable, and this is a good thing.
  • In most cases, however, these items are not suitable for use in septic tanks.
  • A blockage at the input baffle caused by certain goods, such as diapers, might result in back-ups in the main line going to the tank.
  • If members of your family habitually flush other objects down the toilet, you should arrange a family conversation regarding septic tank cleaning and maintenance.
  • Food is readily flushed down kitchen sink drains, whereas trash disposals flush microscopic fragments of food down drain lines as well as down the sink.
  • Keep a drain strainer in your kitchen sink (or sinks) to catch any food that washes off your dishes in order to avoid any problems in the future.

Otherwise, have it replaced or discontinue use of it entirely.

As a build-up of cooking oil accumulates in the inlet baffle, other pieces of debris may become trapped in the sticky trap.

After cooking, allow the oil to cool before pouring it into a trash bag and tossing it in the garbage.

It is a smart way to save money while also protecting your septic system when you repurpose your cooking oil.

Fats and grease can easily pass through drains, but they will eventually clog the septic system and cause it to overflow.

If your home is serviced by a septic system, follow the steps outlined above to modify your habits and prevent unnecessary damage to your system from occurring.

Contact your local septic tank professional, Al’s Septic Tank Service, if you have any questions about what else you can do to keep your septic tank protected and prevent clogging.

Amazon.com: Instant Power Septic Shock Septic Tank Treatment, Drain Cleaner Liquid Clog Remover for Septic System, 67.6 FL OZ (2 Liter) : Health & Household

Experiencing obstructions or needing repairs in your septic tank this year? What you flush down your toilet might be a contributing factor to your plumbing issues. You can take better care of your septic system if you know what to flush and what not to flush. These suggestions will assist you in changing your behaviors and preventing future septic tank jams. In order for solids to be broken down and turned into liquids, bacteria must be present in the tank. Treatment with antibiotics might eliminate beneficial bacteria, which can cause the breakdown of sediments to be slowed, resulting in more frequent pumping of your tank than is really required.

  1. You should consult with your pharmacist if you are unsure about what to deal with any leftover medication after you have completed taking it.
  2. When it comes to flushable items, there are several options.
  3. Unfortunately, many of these goods are not suitable for use in septic systems.
  4. A blockage at the input baffle caused by certain goods, such as diapers, might result in backups in the main line going to the tank.
  5. If members of your family habitually flush other objects down the toilet, you should arrange a family conversation about septic tank upkeep and prevention.
  6. Food is readily flushed down kitchen sink drains, and trash disposals flush microscopic fragments of food down drain lines as well as down the sink.
  7. Keep a drain strainer in your kitchen sink (or sinks) to capture any food that washes off your plates in order to avoid any complications.

You should replace the item if it is not in proper working order.

In addition to cooking oil accumulating in the input baffle, additional debris can become entangled in this sticky trap.

Cooking oil should be poured into a bag and thrown away when it has cooled to room temperature.

It is a sensible method to save money while also preserving your septic system when you repurpose cooking oil.

Fats and grease can readily pass through drains and into the septic system, but they will ultimately block the system.

When it comes to septic systems, following the measures outlined above can help you adjust your behaviors and save your system from suffering unnecessary harm.

Contact your local septic tank specialist, Al’s Septic Tank Service, if you have any questions about what more you can do to protect your septic tank and prevent obstructions.

Amazon.com: Septic Blast! Emergency Septic Tank Treatment & Maintenance

3.0 stars out of 5 for this product Poor packaging, ZERO, and NADA were all cited in a March 1, 2020 review in the United States. Problems with the septic system

Reviews with images

On January 5, 2020, a review was conducted in the United States. 128 fl oz. in size (Pack of 1) Purchase that has been verified This is an excellent product. We have a total of 5 persons in our home. There is a great deal of flushing going on! The septic system is working overtime. In addition to my single monthly maintenance treatments, I will continue to add an emergency septic blast treatment every three months. My septic technician informed me that the more consistently I use a decent monthly septic treatment, the longer I can go without having my septic tanks emptied!

The neighbors only have four individuals living in their home.

(sometimes even less) Me, I just had to have my septic tanks drained for the second time in nearly 8 years, which was a pain!

❣️ On the 29th of December, the United States of America reviewed 128 fl oz.

I used one bottle every week for four weeks, totaling four bottles.

128 fl oz.

This year, I’ve experienced a slew of problems with my septic system.

Verified Purchase Size: 128 Fl Oz (Pack of 1)Verified Purchase We were looking at a $14,000 cost to restart our drainfield.

I had used Green Gobbler on a few of slow drains, and it worked quickly and without leaving a foul odor.

In case there was any buildup, I separated it between two toilets to prevent a mess.

The earth is completely dry.

I breathe a sigh of relief.

On June 28, 2021, a review will be conducted in the United States.

in size (Pack of 1) Purchase that has been verified Low-flow toilets are something I despise.

It began off flushing rather well, but as time went on, it got increasingly sluggish, and eventually stopped flushing solids altogether and only flushed liquids about a quarter of the time.

I tried every sort of drain cleaner I could locate.

I had tried many of the Green Gobbler items in this toilet, but none of them seemed to have any effect on the odor.

As a result, I decided to give it a shot.

I went at things in a slightly different way.

Afterwards, I added the 32 ounces of this product, along with 2 teaspoons of Dawn Dishwashing Liquid, to the mixture.

Instead, I continued to add 2 cups of warm water every 4 hours for the following 24 hours, as needed.

However, I decided to flush it a second time to see what would happen this time.

It is now flushing in the same manner as it did when it was initially put in place.

The fact that I was able to avoid calling a plumber makes me very happy.

Verified Purchase Size: 128 Fl Oz (Pack of 1)Verified Purchase Okay, so I know that like the majority of you who have a septic system, you are investigating and thinking, “Does this stuff truly work?” Let me simply add that I want to stick with this particular brand.

And then there was the dreaded gurgling that everyone dreaded.

Yes, we are utilizing clean goods to keep our system as safe as possible, as well as the proper toilet tissue.

After placing two cups in each bathroom, you can hear the blockage clear almost immediately, indicating that our system is back on track.

Size: 128 Fl Oz (Pack of 1)Verified PurchaseReviewed in the United States on January 5, 2020Size: 128 Fl Oz (Pack of 1) I’ve had an aerator septic tank system for 32 years, and it’s been working perfectly.

The motors and bearings on my air conditioner have seen better days, but I’ve managed to keep the air circulating.

Because I’d been reading about this Septic Blast thing, I figured it couldn’t hurt to give the old system a little assistance, whether it was required or not.

Time will tell whether or not this is true.

128 fl oz.

I’ve been using it for about two weeks now, and I’m noticing some extremely excellent outcomes.

I used to smell it on a regular basis, but not longer.

Things have really improved.

One more emergency treatment will be performed, after which I will begin utilizing the monthly therapy. I am quite pleased with this product. I have not found a product that works as quickly or as well as this one.

Leave a Comment

Your email address will not be published. Required fields are marked *