Who Installs Septic Tank Risers In Miami County Oh? (Solution found)

Can I build above my septic field in Ohio?

  • The State of Ohio advises homeowners not to build additional structures or park cars in areas above underground sewage systems and septic fields. This is to avoid damage to the septic system, which would necessitate expensive repair work.

Can a homeowner install a septic system in Ohio?

The state and local department of health will charge up to $75 for a permit to install a new system, and $34 to alter a system. An operation permit will now be required for all homeowners. Local health districts will set the amount and length of the operation permit, which can vary between one and 10 years.

How much does a new septic system cost in Ohio?

On average, the cost of installing a new septic tank system is $3,900. The price ranges from $1,500 to $5,000 for a typical 1,250-gallon tank, which is an ideal size for a three- or four-bedroom home. This cost is inclusive of the tank itself, which costs $600 to $2,100 or more, depending on the type.

How many feet should a septic tank be from the house?

Septic tanks are required to be at least 5 feet from the house, although most are between 10 and 25 feet away.

What type of septic systems are allowed in Ohio?

Finally with updated rules, Ohio is catching up to the rest of the country and is able to use more modern onsite wastewater treatment systems. Mound systems, bioreactors and drip irrigation systems are just some of the types of systems used throughout the country that can now be used in Ohio.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Are septic holding tanks legal in Ohio?

(b) The director may allow a holding tank to collect, hold or store both industrial waste and sewage provided the following: (i) The maximum daily flow of sewage flow into the holding tank does not exceed twenty-five gallons per day.

How much does it cost to install a septic tank in Florida?

Purchasing and installing a septic systems can cost anywhere from $1,500 – $15,000. The price varies based on the size of the system and the type of soil. Homes with more than two bathrooms will need a larger tank, which increases the material costs.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

How long do septic systems last?

The material of the septic tank – plastic or concrete tanks can last for nearly 40 years. While the steel tank lasts for 15-20 years. Other factors like water usage, trees or plants growing in the area, the lifespan of pump filters, sand filter systems, and other internal components, the objects flushed to the system.

How far does a septic tank have to be from a house in Florida?

In the event that you have a non-potable well, then the onsite sewage treatment and disposal systems need to be placed at least 50 feet away.

How do I decide where to put my septic tank?

Ideally, a septic tank should be placed on level ground. If possible, the tank should be placed on high ground in order to avoid flooding and seeping. It will be important that you look around and avoid steep slopes or areas of dense tree roots that can damage your entire system.

Can you build a deck over a septic tank?

You should never build a deck over a septic field; doing so will prevent the natural draining and dissipation of the effluent. This can ruin the septic system, not to mention releasing foul smells into the air all around your deck. The dissipating effluent can also rot the deck from underneath.

What can you put on top of a septic field?

Put plastic sheets, bark, gravel or other fill over the drainfield. Reshape or fill the ground surface over the drainfield and reserve area. However, just adding topsoil is generally OK if it isn’t more than a couple of inches. Make ponds on or near the septic system and the reserve area.

How much does a mound system cost?

Mound Septic System Cost A mound septic system costs $10,000 to $20,000 to install. It’s the most expensive system to install but often necessary in areas with high water tables, shallow soil depth or shallow bedrock.

About Alexander Sewer & Drain Service

The Yext Knolwedge Tags are currently being used as placeholders. This message will not be seen on the live site, but will only be visible within the editor. The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after. It appears that the Yext script you supplied is either empty or incorrect: It should look something like this: script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” account id=ACCOUNT ID location id=LOCATIONS ID type=”text/javascript”/script

Services

The Yext Knolwedge Tags are currently being used as placeholders for now. However, this notice will only display within the editor and not on the live site.— The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after launch. Incorrect or missing information in the Yext script that you entered: It should have the following appearance:. The following script is async and deferred: src=” account id=ACCOUNT ID location id=LOCATIONS ID ” account id=ACCOUNT ID ” location id=” type=”text/javascript”/script

Specialties

There are no Yext Knolwedge Tags yet, thus this is a placeholder. However, this warning will only show within the editor and not on the live site. The Yext Knowledge Tags have been successfully implemented and will be made available on the website shortly afterward. The following Yext script is either empty or incorrect: It should have the following appearance: script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” account id=ACCOUNT ID location id=LOCATIONS ID” type=”text/javascript”/script

Languages

This is a placeholder for the Yext Knolwedge Tags. This message will not display on the live site, but will only appear within the editor. The Yext Knowledge Tags have been successfully deployed and will be made available on the website. The Yext script you entered is either empty or incorrect: It should look like this: The following script is async and deferred: src=” account id=ACCOUNT ID location id=LOCATIONS ID” type=”text/javascript”/script

Year Established

The Yext Knolwedge Tags are currently being used as placeholders. This message will not be seen on the live site, but will only be visible within the editor. The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after. It appears that the Yext script you supplied is either empty or incorrect: It should look something like this: script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” account id=ACCOUNT ID location id=LOCATIONS ID type=”text/javascript”/script

Products

The Yext Knolwedge Tags are currently being used as placeholders for now. However, this notice will only display within the editor and not on the live site.— The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after launch.

Incorrect or missing information in the Yext script that you entered: It should have the following appearance:. The following script is async and deferred: src=” account id=ACCOUNT ID location id=LOCATIONS ID ” account id=ACCOUNT ID ” location id=” type=”text/javascript”/script

Associations

There are no Yext Knolwedge Tags yet, thus this is a placeholder. However, this warning will only show within the editor and not on the live site. The Yext Knowledge Tags have been successfully implemented and will be made available on the website shortly afterward. The following Yext script is either empty or incorrect: It should have the following appearance: script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” account id=ACCOUNT ID location id=LOCATIONS ID” type=”text/javascript”/script

Brands

The Yext Knolwedge Tags are currently being used as placeholders. This message will not be seen on the live site, but will only be visible within the editor. The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after. It appears that the Yext script you supplied is either empty or incorrect: It should look something like this: account id=ACCOUNT ID location id=LOCATIONS ID” type=”text/javascript”/script script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” type=”text/javascript”/script The Yext Knolwedge Tags are currently being used as placeholders.

The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after.

Availability

Payment Types

The Yext Knolwedge Tags are currently being used as placeholders. This message will not be seen on the live site, but will only be visible within the editor. The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after. It appears that the Yext script you supplied is either empty or incorrect: It should look something like this: script async defer src=” account id=ACCOUNT ID location id=LOCATIONS ID” account id=ACCOUNT ID location id=LOCATIONS ID type=”text/javascript”/script

Business Attributes

The Yext Knolwedge Tags are currently being used as placeholders for now. However, this notice will only display within the editor and not on the live site.— The Yext Knowledge Tags have been successfully deployed and will be made available on the website shortly after launch. Incorrect or missing information in the Yext script that you entered: It should have the following appearance:. The following script is async and deferred: src=” account id=ACCOUNT ID location id=LOCATIONS ID ” account id=ACCOUNT ID ” location id=” type=”text/javascript”/script

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,451, with an average cost of $6,804 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

The two types of systems covered in this book are aerobic and anaerobic systems. This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

See also:  How Often Septic Tank Pumpe4D?
National Average $6,804
Typical Range $3,157 – $10,451
Low End – High End $450 – $21,000

The cost information in this report is based on real project costs provided by 948 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield.

It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Replacement of a tank lid costs between $30 and $70. Drain Field Replacement Cost: $7,500. When replacing an aerobic system, talk to your service expert about the advantages, disadvantages, and expenses of upgrading to a more efficient aerobic system.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
See also:  How Strong Iis Septic Tank Lateral Line Pipe? (Best solution)

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades.

It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

Check to see whether your septic system can handle any new additions. Pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or nitrite-nitrate.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

As the biggest online distributor of Aerobic Septic System Parts and Septic Tank Parts, Septic Solutions® is the go-to source for all of your septic system needs. The greatest online assortment of septic-related items is available from us, and we have over 1000 different septic-related products in stock. This includes septic tank risers, effluent filters, vent pipe odor filters, and a variety of other goods. On the majority of our goods, we provide fast and free same-day shipping!

FAMILY OWNED COMPANY WITH OVER 100 YEARS OF COMBINED EXPERIENCE!

Founded in 1989 by the James family, our firm is a leader in the industry. All five members of the family are still actively involved in the operation of the company today! We have the necessary expertise and knowledge of the items. Customers have come to rely on Septic Solutions, Inc.® to supply them with the high-quality goods and excellent customer service that they require. In 2003, we launched our online store to service clients throughout the United States and even internationally. Our objective was to provide a comprehensive selection of septic system products for every application at the most competitive pricing feasible.

WE STAND BEHIND THE 1,000+ PRODUCTS THAT WE SELL!

Purchasing your septic system goods from Septic Solutions® offers several advantages, one of which is that we are familiar with the items we sell. It is owned and maintained by a family that has been installing, maintaining, building, designing, and selling septic systems and supplies since 1989. Septic Solutions® is a trademark of Septic Solutions, Inc. We are familiar with the goods we sell since we have been utilizing and maintaining the majority of them for a significant number of years. Since then, we’ve learned which things work and which do not, which products endure for long periods of time and which ones do not, and which items are worth investing in.

New Septic Systems

If you need a septic system installed on a new building site or if you want to replace your home’s existing septic system with a more modern configuration, the Dooley Service Pro team is here to assist you. Professional septic tank design and installation in Springfield, OH, and the surrounding areas are something we take great pride in. Don’t put yourself in a position where you’ll have to deal with the numerous issues that might develop when a septic tank is designed or installed poorly. Instead, enlist the help of our pros for all of your septic tank removal and replacement requirements.

Everything from septic cleaning and repair to bespoke design is something that our team is capable of accomplishing. We are pleased to service customers outside of the Miami Valley, as well as those in the following Ohio counties:

Having a correctly built septic system for your house or company assures that it will last for a longer period of time and will require less repairs and upkeep. Our professionals have more than five decades of combined experience in the septic sector, giving them the knowledge and expertise to build your bespoke septic system with accuracy and care. When it comes to building a septic tank, we recognize that homeowners have a lot of questions. Therefore, we are delighted to address your concerns and guide you through the installation process, which includes everything from new septic tank pricing to design alternatives.

SEPTIC SYSTEM DESIGN DETAILS

When developing a bespoke septic system, it is necessary to take into account a number of parameters. While the specifics of your septic system will vary based on the demands of your house or company, there are several fundamental standards that must be met in order to have a properly built septic system.

  • SIZE Before you can construct a septic tank, you must first determine the size and kind of septic tank and system that your property requires. These considerations can be established by the quantity of expected water use and trash produced each day
  • Nevertheless, RETENTION It is necessary to examine the quantity of retention in order for the septic system to work and fill effectively. This component is related to the size of the septic tank that must be installed. LOCATION As soon as you have determined the right size of your septic tank and system, you must select where the septic system should be installed. It’s important to be aware of any unique area laws that may apply
  • DRAINAGE ARENA It’s important to note that the drain field is an important part of the process while installing a septic tank in Springfield, Ohio. Make certain that the drain field’s size and location are correct.
See also:  Diagram Of How A Septic Tank Works? (Solution found)

+ Display all available choices

Professional Septic Tank Removal

If you need to replace an old septic tank with a new one, the procedure of removing the old tank is just as vital as the process of installing the new one. Septic system installations in Springfield, OH are carried out using cutting-edge equipment and procedures by our team of professionals. To minimize interrupting a greater area of your land than is absolutely necessary, we may use pipe bursting and hydro-excavation techniques, among other things. With our combined experience as full-service plumbers and septic professionals, we have the knowledge and expertise to offer you with comprehensive septic system installation and removal services.

Call the Dooley Service Pro Experts

When you seek septic tank installation services in Springfield, OH, you should expect nothing less than the greatest expert support. You may be certain that the Dooley Service Pro team will perform the task to your specifications since they have years of design and installation experience. Our full-service plumbing firm is glad to be able to handle everything from drain cleaning to water heater installation and repair. You may rely on us for any and all of your plumbing needs, including hydro-excavation and well drilling services.

We’ll take you step by step through the price of a new septic tank and the replacement procedure in total openness.

SCHEDULE A FREE ESTIMATE TODAY

MSI Environmental’s Lid and Riser System has been approved by Darke County. Our company is pleased to report that the Darke Jurisdiction General Health District has approved the usage of M S I Environmental’s Lid and Riser System in their county! M S I Environmental employs a mix of concrete caps and high-quality plastic dual-wall riser tubes for its riser tube constructions.

M S I Environmental’s LidRiser System had previously been certified by and had been in operation in the other counties we serve for many years before we came on board. There are various benefits to use this combination, including the following:

  • It is possible to get infinitely changeable heights using high-quality plastic dual-wall riser tube by simply cutting the tube length to the required height. Plastic dual wall riser tubes of high quality will withstand gases that would otherwise cause degradation or corrosion, ensuring long-term endurance. High quality plastic dual wall riser is simple to carry and install due to its tough, sturdy, yet lightweight construction. When used in conjunction with concrete lids, the riser system is sturdy enough to be driven over with a lawn mower while still being heavy enough to prevent minors from obtaining entry. High-quality plastic dual-wall riser tube is both cost-effective and adaptable, and it is made of high-density polyethylene. MSI employs a riser tube with an 18-inch diameter, which is ideal for septic maintenance and for providing access for repairs to the septic system.

Using MSI’s riser system, the entry to the septic system may be brought up to a level flush with the ground, allowing for easier access while also not interfering with grass mowing or other lawn maintenance activities.

Share This Post With Others!

a link to the page’s load

Septic Services

Septic tanks should be emptied out at least once every two to three years. This timescale might vary based on a multitude of circumstances, including but not limited to:

  • The number of individuals that live in the house
  • The frequency with which the garbage disposal is utilized
  • Anything other than body waste and toilet paper should be flushed

Do you have no idea where your tank is? Is it possible that other firms have been unsuccessful in their search? It’s not an issue. We’ll be able to track it down!

DrainsSewer Lines in Springfield, OH

Slow-moving drains eventually become blocked drains due to the accumulation of debris. It is possible for us to clear obstructions and clean your main line leading to the septic tank. We also provide drain cleaning services for any and all of the drains in your residence. We stand by the quality of our work! Unless we are unable to clear the blockage, you will not be charged for the Eel Service.

Septic Repairs in Springfield, OH

In addition to routine maintenance, we have extensive experience with many sorts of septic system repairs, including but not limited to:

  • The repair of inlet and output lines
  • The installation of risers
  • The replacement of pumps in lift stations
  • Reconstruction of the leachfield line
  • Installation of baffles.

Precast Concrete Septic Tanks vs. Plastic Septic Tanks

When it comes to selecting a septic tank for your property, there are several alternatives to consider. First and foremost, you want to be sure that the tank you choose has the appropriate capacity for your home. After that, you’ll want to be certain that you select a tank that will give years of dependable service for you and your family members. A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass.

The Benefits Of A Precast Septic Tank

  • The tanks weigh a great deal. While this may be considered a disadvantage by some, we feel it is one of the most significant advantages of using carbon fiber over other materials. A precast concrete sewage tank will never “float” to the surface, as certain lesser weight tanks can do in certain scenarios. Precast concrete septic tanks have a specific gravity of 2.40, which makes them more resistant to buoyant forces than other septic tank materials. HDPE has a specific gravity of 0.97, which is very high. For anchoring structures composed of more buoyant materials, further labor-intensive and time-consuming on-site preparation is required. While this should be considered when selecting a new sewer system, rusting will not be an issue with precast concrete sewage treatment systems. Steel tanks, as well as sections of some plastic and fiberglass tanks, are extremely prone to corrosion.

Why A Concrete Septic Tank?

Concrete septic tanks are preferable than fiberglass or plastic septic tanks because they are waterproof and heavy duty, making them the preferred storage vessel for on-site sewage storage and treatment over the other materials. In the United States, there are over 40 million septic systems in operation. Septic systems rely on the soil surrounding the septic tank, which is the major component in a septic system, to filter the wastewater discharged from the tank. Concrete septic tanks are also well-known for the following characteristics, in addition to the advantages described above:

  • Strength improves with time
  • Durability
  • Ease of installation
  • Low susceptibility to damage during the backfill process

Shea Concrete Septic Tanks

The Shea Concrete Company has been building and installing precast concrete septic tanks for more than 65 years. Shea has a comprehensive variety of septic, cistern, and pump tanks in capacities ranging from 500 to 55,000 gallons, with the most of these sizes being transported by our company trucks, as well. Underground tanks for sewage storage that are safe and long-lasting are manufactured by us at a competitive price. If you are thinking about upgrading or installing a new system, we would be delighted to speak with you.

Septic tank service and septic pumping in Dayton Ohio

​**We are open during the Covid 19 epidemic. Call us for all of your septic service needs today**Septic tank services are not just your average, run of the mill septic tank sanitation business. We have been in business for many years and take care of you like family. You can expect a professional and courteous assistance. from our well trained employees and we will not disturb you while we perform the work on your septic tank system. We will repair and remove your residential and business waste from your septic tank or grease trap effectively.

From septic tank backups to grease trap pumping, we have you covered!Please let us know how we are serving you by leaving a review: will not find a better and more affordable Septic cleaning company in Dayton, OhioWe clean up septic tank overflows like no one’s business.

We will pump it out and check for problems.

We will perform septic tank jetting to fix the issue and save you cost.Do you have a new house and need a septic tank installed?

We will replace the lidand install a septic tank kid catcher to keep your loved ones safe!Is your septic tank emitting bad odors or drawing flies?

Having trouble with your septic leach fields?

Call us today and save937-319-4051You have found the most awesome Grease Trap cleaning business in Dayton!We clean out grease trap boxes better than anyone!

You want to avoid grease trap overflow in your system so we will setup a time you specify to purge it out regularly.It is important to keep the grease trap flowing into to box.

You can also have a grease trap overflow costing you time, money and potentially customers.

If you satisfied with poor work and unprofessional workers going in and out of your carrying God knows what from your septic tank into your home.

Or you can hire us and expect prompt courteous maintenance at a fair price and no gotchas or unpleasant, expensive charges.

Be assured that we hire the best contractors that strive for you complete satisfaction.

​ Hours of OperationMonday-Friday: 7am-7pm Saturday: 7am-5pm Sunday: ClosedEmergency Services are available.


We service the counties ofGreen, Montgomery, Clinton, Warren, Clark, and Miami.

Leave a Comment

Your email address will not be published. Required fields are marked *