In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.
- Your septic tank and drainfield are typically installed parallel to the sewer line that extends from your home into the yard. In your home’s basement or crawl space, you may be able to locate a 4-inch sewer pipe where it leaves the house that can lead the way to your septic system. Follow the pipe across the yard by probing every 2 feet or so.
Where is the cleanout on a concrete septic tank?
The septic tank should be cleaned from a cleanout port – usually located in the center of the tank.
How far down is a septic tank lid?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
Are septic tank locations public record?
Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.
How can I tell if my septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
Do all septic tanks have filters?
First, not all septic tanks have a filter, especially the older septic tanks. Now many government agencies require or recommend a filter when a septic tank is installed. Cleaning a septic tank filter is different than pumping out a septic tank and cleaning it.
How do septic tanks look?
Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.
Do all septic tanks have two lids?
A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
How deep are drain fields buried?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
Do I have to change my septic tank?
Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.
How do I find my septic lateral lines?
Call your local electric utility provider or gas company to locate buried gas or utility lines before digging. A septic tank probe can also help you find the location. Stick the long, thin metal probe into the ground until you feel it hit the tank and feel the edges of the tank.
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
How to Find Your Septic Tank Lid
Previous PostNext PostWhether you realize it or not, it is critical that you be aware of the position of your septic tank lid and the septic tank itself. Despite the fact that septic tanks are fairly huge, they can be difficult to identify, particularly if they have not been properly maintained over time. Continue reading to find out how to locate your septic tank lid.
Why It’s Good to Know Where to Find Your Septic Tank Lid
Knowing the location of your septic tank is a fantastic approach to spot septic tank problems as soon as they occur. Consider the following scenario: If you saw water near your septic tank lid, you would know right away that you could have a problem with your system being overloaded with waste. Furthermore, by understanding where your septic tank is located, you may avoid parking cars on top of it, which might cause the tank to collapse and create flooding. You’ll also be able to point service personnel in the right direction for septic tank services, which will eventually save them time and money while also saving you money.
How to Find Your Septic Tank Opening
Knowing how critical it is to know where your septic tank lid is located, it’s time to go out and find one for yourself. Keep an eye out for a circular lid that is roughly two feet in diameter during your quest. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete. It is not always simple to locate the septic tank lid, however, because untidy vegetation, mud, or debris might obscure the lid’s location. If you live in a snowy climate, seek for a spot of lawn where the snow melts more quickly than it does anywhere else on the property.
How to Find Your Septic Tank Lid as a New Homeowner
During the process of purchasing your house, you should have been provided with a map of your property that showed the location of your septic tank. This is normally included as a part of your home inspection service package. All you have to do from there is compare the diagram to your land, find the septic tank location, and potentially dig around it to check whether the lid has been hidden by vegetation or other obstructions.
People have been known to place an object such as a huge rock on top of the septic lid, so be sure to look beneath landscaping stones as well.
How to Find Your Septic Tank Lid as an Existing Homeowner
Still having trouble locating your septic tank lid? There’s a significant probability it’ll end up in the ground. The pipes coming from your basement should be followed, as they will take you in the direction of your septic system, which is what we propose. Then, once you’ve determined the correct direction, check for any high or low points in the yard that might reveal the location of your septic tank. You can find the lid of your septic tank by probing the ground with a metal probe every few feet with the probe.
Because most lids have a metal handle or fastener on them to hold the lid closed, you may also use a metal detector to find them.
The majority of lids are buried up to a foot deep, but some lids might be buried as deep as four feet in extreme cases!
How to Maintain Your Septic Tank Lid
Following the discovery of your septic tank lid, keep it in good condition to avoid damage and ensure simple access for future septic tank maintenance, such as pumping your septic tank every three- to five-year period. Here are some pointers for keeping your septic tank lid in good working order:
- Keeping the grass around the septic tank lid regularly mowed is important. Remove any dirt or debris that may have accumulated on your septic tank lid
- Mark the area to ensure that no one parks or constructs structures there. It is possible to do this using a flag, garden décor, or ornamental pebbles.
Professional Septic Tank Services
Is it difficult to find trustworthy septic tank services or septic tank installation? If you are looking for septic tank installation, inspection, and cleaning services, check with your local Mr. Rooter ® Plumbing franchise. Mr. Rooter charges a set amount up front, with no overtime fees or additional expenses. To get started, call us at (855) 982-2028 or fill out our online estimate request form. Is the lid of your septic tank obscured by grass? Inquire with The Grounds Guys about routine lawn care and upkeep.
Rooter, is a member of Neighborly’s network of dependable home service experts, which includes Mr.
By hiring The Grounds Guys to provide trustworthy grass mowing and landscape care services, you can be assured that your septic tank lid will always be simple to locate.
Procedure for Opening Septic Tanks
- ASK a question or make a comment about how to open a septic tank safely and properly for inspection or cleaning.
ASK a question or make a comment about how to open a septic tank safely and correctly for inspection or cleaning.
Procedures for Safe Opening of a Septic Tank, Cesspool, or Drywall for Inspection or Cleaning
The following are the contents of the article:
- How to remove the lid from a septic tank
- When it comes to pumping out the septic tank, which septic tank entrance should be used? Why
In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.
- There is a risk of dangerous, perhaps deadly collapse due to subsidence (depressions or low regions in the earth) near the location of the septic tank. Evidence of recent construction activity that may necessitate further investigation in order to determine the status of the septic system
- Backup or effluent breakout at the surface of the ground in the septic tank region.
- Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been piled by the owner to serve as an access well to his septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a serious collapse risk that may have resulted in a deadly hazard. We covered the area with plywood and roped it off, and we quickly informed the residents and the property owner of the situation, both verbally and in writing
Procedure for Opening the Septic Tank Pumping Access Port
It is necessary to clean the septic tank using a cleanout port, which is normally positioned in the center of the tank. A small access opening, such as one over an intake or outlet baffle, does not provide enough space for adequate sludge removal from the septic tank bottom, and it increases the likelihood of future clogging of the tank’s inlet or outlet due to partially removed floating scum that has not been completely removed from the tank bottom. In this particular scenario, we already had the measurements to the exact placement of the septic tank cleanout cover due to previous work.
A wrecking bar is set to be used to remove the cover from the vehicle. It is important to note that we excavated far enough away from the tank entrance so that when we remove the lid, we will not have a large amount of dirt falling into the septic tank.
Reader CommentsQ A
@Ron, In order for a concrete septic tank lid to be correctly erected, it must feature both access openings and cast in iron loops to which a hoist may be attached. Alternatively, if your septic tank cover does not have those points of purchase for lifting, you will require a flat bar and a larger wrecking bar to pry up the excavated lid from the septic tank sufficiently to allow you to put a chain around the lid, most likely two Chainz, and lift the lid with a hoist and tripod mechanism or you will use an on-site motorized hoist.
- 1/2 x 27/4 removing the top of a septic tank @Phil, Although what you describe is theoretically doable, it may be less expensive and more rational to do so in a different way.
- This is due to the fact that just stitching a circular hole does not ensure that I am creating a hole through which the lid will not be dropped.
- Edge My concrete septic tank, which was constructed when the home was built in 1979 and does not have any manholes or openings for pumping out, is in poor condition.
- Is it feasible to cut two manholes using a concrete saw that are 20″/24″ in diameter and then build risers and a cover on top of them?
- Could you please share a picture of the tank top?
- It is common for the concrete top to be tapered; nevertheless, it may just be trapped by effloresent salts and filth.
- I have a feeling that simply tugging will not be effective.
This would have stopped leaks but would have made it extremely difficult to open the tank for the next person who needed to open the tank.
Repeat this process many times all around the cover’s perimeter.
For me, this has worked almost every time in the past.
It is recommended that you build a septic tank riser that is sealed to the tank top, as well as a new secure cover on top of the riser if your septic tank lid is not near to the ground level.
Never work on your own.
I’ve erected two wood 4x4s on top of the lifting ring to provide additional support.
All I’ve done three times is shattered those 4x4s.
Do you have any recommendations?
A septic tank pumping provider can remove plastic bags, tiny pebbles, and other debris from your tank, as well as the sediments, scum, and sludge that has accumulated there.
What is the best way to get them out?
When the septic tank is drained out, would it make sense to place a plastic bag over the top hole of the tank to keep the odors contained?
Gerard A plastic bag as a sewer line cap doesn’t seem right to me – it’s not durable, it’s the incorrect material if a cover is required, and if it’s a vent rather than an access pipe, the vent must be open to the atmosphere and protected from animal intrusion.
What is the function of this item?
A typical septic tank is equipped with clean out access covers that are strategically placed.
Maybe something as basic as a flat piece of concrete or stone will be sufficient, or maybe something more complex.
To be quite honest, I would have expected the contractor who dug the hole to be accountable for ensuring that the system was repaired and safe.
What should I do to solve it?
What store would I go to in order to acquire septic tank covers?
A few years ago, I had a beautiful new house built for me.
I have three plastic polylok lids, one of which is above ground and is for the pump.
I’d like to purchase risers so that I may build all three at a depth of around 6 inches below ground level.
What are the advantages and disadvantages.
Do you have any other suggestions?
I apologize for the lengthy post.
Sorry, but “True Bolt” isn’t a phrase I’m familiar with or associate with septic tank lids in any way.
Although this is not always the case, Mary, as the pumper may be able to access the entire tank bottom from a single opening depending on the tank’s size and shape; however, if your pumper is unable to do so from a single opening, you may want both openings opened to inspect the condition of the tank baffles.
There are two holes in my septic tank. Is it necessary to open both doors for a pump out?
Question:cannot find the manhole cover of the septic tank
(8th of August, 2014) “We’ve located the cesspool concrete lid (about 12 foot diameter), but after digging a 2 foot perimeter, we were unable to locate the manhole cover, which was required for an inspection.” vicki levin stated Help? My husband is becoming increasingly upset with the digging!
Reply:
If it’s a cesspool, rather than a septic tank, and it’s spherical, the access lid is normally located in the center of the container.
Question: how do i remove septic tank lid that is stuck
The entrance lid would normally be in the center of the cesspool, if it is in fact a cesspool rather than a septic tank, and it is spherical.
Reply:
Anon:WARNING: If the septic tank cover, lid, or access aperture has partially caved in or sank into the tank, the condition is extremely dangerous – an unsecure cover implies that someone might fall into the tank, which is generally lethal very quickly. Please keep everyone away from the septic tank area until such time as you have had the tank inspected and opened for additional inspection by a professional. Depending on the tank type and condition, lifting the lid may necessitate the use of a pry bar or wrecking bar, as well as a small portable winch (which is unusual).
Alternatively, consider the following:
Septic Pumping ProcedurePumper Truck Operation Articles
- PROCEDURE FOR SEPTIC TANK INSPECTION
- MISTAKES MADE IN SEPTIC TANK PUMPING
- PROCEDURE FOR SEPTIC TANK PUMPING
- HOW TO CLEAN A SEPTIC TANK
- WHEN TO CLEAN A SEPTIC TANK
- WHEN NOT TO PUMP A SEPTIC TANK
- HOW TO FIND A SEPTIC TANK
- HOW TO OPEN A SEPTIC TANK
- INSPECT THE SEPTIC TANK BEFORE PUMPING
- SEPTIC TANK INSPECTION PROCEDURE
- SEPTIC TANK LEVELS OF SEWAGE
- PUMPER TRU
Suggested citation for this web page
HOW TO OPEN A SEPTIC TANK at Inspect a Tank An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.
Technical ReviewersReferences
CitationsReferencesPublisher InspectApedia.com – Daniel Friedman can be displayed or hidden by clicking on the appropriate button.
How To Find Septic Tank Location: A Guide for Property Owners
The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.
Follow the Main Sewer Line
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.
Inspect Your Property
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.
- Paved surfaces
- Unique landscaping
- Your water well, if you have one
- And other features.
If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.
Check the Property Records
Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.
Most counties, on the other hand, keep records of septic tank installations for every address.
Don’t Try to Fix Septic Tank Issues Yourself
Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.
Schedule Septic Tank Maintenance
The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.
Metropolitan Atlanta and the neighboring areas receive high-quality service from us. We are open seven days a week, twenty-four hours a day. When you require emergency sewer services, we are here to assist you.
Frequently Asked Questions
A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.
How do I know if I have a septic tank?
Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.
If you’re also using well water, it’s possible that you won’t receive one at all.
What do I do once I locate my septic tank?
Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.
This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.
Then contact The Original Plumber to have your septic system maintained on a regular basis.
All of the heavy lifting has been delegated to our team of professionals.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank.
Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build. As a result, and due to the fact that it requires constant pumping, you’re very certain to discover it in a location that can be reached by a huge truck while looking for it.
5 Ways to Find Your Septic Tank
1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.
- 3.
- Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
- Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
- When you do, that’s when your septic tank comes into play!
- Look for the Lid.
- You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
- Those areas should be excavated in order to disclose the lids.
Get in touch with the pros.
Lifting concrete lids will necessitate the use of specialized equipment.
A fall into an unprotected septic tank has the potential to be lethal.
Produce your own diagram of your yard, which you may file away with your other important house paperwork.
That’s all there is to it!
To book a plumbing service in Bastrop County, please contact us now!
How to locate your septic tank and your drainfield
Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis.
It is impossible to perform maintenance operations, however, if you do not know where the tank is located. You can identify your septic tank by following a few simple procedures, which are outlined here.
Steps to follow to locate your septic tank and drain field
The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.
- If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
- This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
- Simply look for possible access coverings or a structure that might be concealing it.
- These pumps are used to remove waste from the building.
- It is supposed to be connected to the sewage output pipe.
- As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall.
- As a result, it is probable that the tank will be positioned around the corner from the building.
Tips for locating your septic tank
Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.
- It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
- Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.
Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.
Prevent being overly harsh with your shovel in order to avoid causing harm to the pipes. Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.
Inspecting the tank
It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.
It is possible that someone will fall into the tank, causing significant damage or possibly death.
Conclusion
You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.
Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.
How to Locate a Septic Tank
A surprising number of homeowners have had to figure out how to find the location of a septic tank on their premises. If you’re purchasing a property with a septic system or discover that your property’s tank hasn’t been maintained in years, you’ll want to know where the tank is located because all septic tanks must be pumped at some point in time. In the course of a real estate transaction, the property owners or real estate agent may be aware of the location of the tank. Inquire about the “as-built,” which is a diagram of the septic system and the specifics of its installation.
Unfortunately, locating the septic tank may not be as simple as it appears.
Because septic system permits have only been required in Oregon since 1972, you may have to rely on visual cues to determine whether your system is working properly.
1.Follow the Outgoing Sewer Pipe
Look for the four-inch sewage pipe that runs through the structure and the location where it exits the building in the basement or crawl space. Locate the location outside the building where the pipe exits the building or the location of an access cover over the pipe. It is required that septic tanks be at least five feet away from the structure, although they are usually between 10 and 25 feet away.
You may follow the pipe all the way to the tank using a metal probe. It is important to note that sewage lines may curve and run around the corner of a building rather than following a straight path to the holding tank. Make sure to probe lightly so as not to harm the tank.
2.Search for Septic Tank Risers and Lids
Depending on their age, septic tanks are either one- or two-compartment structures. Each compartment has a cover, with two additional lids for dual-compartment tanks that were added later. If the tank includes an access point known as a riser, the lid may be readily visible from outside. Look for round, plastic discs that are about a foot or two in diameter. Due to the fact that the lids might be flush with the ground or just a few inches above it, they can get overrun with grass and other plants over time.
Tanks without risers are likewise equipped with lids, however they are located underground.
3.Find the Drain Field First
In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more quickly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other parts of the yard. Spots of high or low ground in the yard might possibly indicate the presence of a subterranean tank or drain field. You will be able to discover the tank if you probe these regions.
Reasons to Hire a Contractor for Help
Attempting to locate a septic tank on your own can be risky, and in some cases, lethal, if the septic system is old and in danger of collapse. In the event that you fall into a cesspool, dry well, or septic tank, you will die. Removing septic tank lids on your own might potentially put you at risk of contracting bacterial or virus diseases. If you detect any of the following issues, please contact a contractor to assist you in locating or inspecting your septic tank:
- Soil that is sinking around the tank or drain field. Drainage backup into the home’s sewer system, or toilet backup
- A foul odor in the area where you assume the tank and drain field are located
- When there is no rain, pooling water, muddy soil, or spongy grass might occur. Septic tank covers that are rusted, cracked, or have been replaced with improvised lids are prohibited.
Even though you may be ashamed about forgetting where your septic tank is, it is a very frequent problem among homeowners. A contractor may assist you in locating it, and he or she may do it as part of the pumping service. If you need assistance locating your tank or if you have any other questions, please contact us at 503-630-7802. We are available to assist you!
The Dangers of Not Knowing Where Your Septic System Access Is
Every septic system must be pumped on a regular basis to prevent it from overflowing and causing damage to your yard or property. As a result, if you are unaware of the location of the septic system’s entry point, your home may be in risk. The following are some simple measures to take in order to locate your septic system, allowing you to avoid the danger of not knowing where your septic system access is located. Locate a Map In the event that you have recently moved into your house and are unfamiliar with the surroundings, you may be unable to determine where your septic system’s entry point is located.
- Every county should maintain records of every septic system that has been established, as well as a map with schematics showing the exact location on your property where your septic tank is located, if one has been erected.
- Keep up with the Pipe Every septic system is established in conjunction with a sewer line that runs from your house into your backyard.
- You can locate your tank with the help of a thin metal probe that is put into the pipe.
- When you feel the probe make contact with a solid surface, you’ve found your tank’s location.
- Remove the lid with care; do not attempt to do so yourself.
In order to remove the lid, professionals must use specialized equipment. Following the discovery of your system, call Affordable Pumping Services with any concerns you may have concerning your septic tank and to arrange for a regular pumping plan.
How To Locate a Septic Tank
Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Contact your local health agency for public documents.
- These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.
- Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
- Make contact with the construction company that built your home.
- Find the location of the main sewer line.
- Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
- By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
- The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.
An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.
Please contact us.
We have specialized technology that we can use to pinpoint the location of your tank.
You should make a note of the position of your tank for future reference if you were successful in discovering it.
A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.
As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.
How to find your Septic Tank at Home
When was the last time you paused to think about what happens to the things you flush down the toilet? It’s a little disgusting to think about, isn’t it? It’s possible that you’re conjuring up images of cobwebby crawlspaces with a swarm of creepy-crawly unmentionable creatures sliding, slithering, creeping, or crawling over crusty, rusted, ooey-gooey piping that’s oozing slimy goo from every joint. If this sounds like something you’re picturing then you’re not too far off the mark. I sincerely hope you are.
- That’s why I’d want to assist you in learning how to locate your septic tank.
- Simply dial 911 and ask for assistance in a calm manner.
- Most hide-and-seek games are won by septic tanks, which are well-known for their amazing ability to outperform the typical human rival.
- The good news is that.
- Contrary to common misconception, septic tanks are not often found in attics, basements, or any of the numerous closets that may exist in a house or apartment.
- Relax in your favorite place for a few minutes with your favorite beverage in hand.
- Yes, you read that correctly: your yard.
Alternatively, you can sink.
Or whatever it is that’s causing the terror to rise in your chest to rise in your chest.
Septic tanks are normally installed in one of your backyards or on your property.
How are you doing?
If your septic tank is in close proximity to your well, this should be avoided.
Septic tanks are often located on the other side of a house from where your home is located.
Tanks are often placed with their tops buried beneath the surface of the ground, usually at least 12 inches below the level of the ground’s surface.
A plastic access tube or a concrete riser structure that runs from the top of the tank to the ground level will often be included to give access for a Septic Pumping firm to empty the tank. Shankster Brothers (also known as Shanksters)
Many septic tank installers will attempt to blend these access risers into the surrounding landscaping so they don’t create an ugly eyesore.
So the next step is to mentally go about your yard, looking for any circular, plastic lids that could be lying around. These can range in size from 10 inches to 24 inches in diameter and can be either black or green. Second, if the answer is no, consider any round, square, or rectangular concrete lids that may be present in your yard or landscaping as a possible source of contamination. Often, they will be practically flat with the surface of the ground, allowing a lawnmower or rake to pass directly over the top of them without causing damage.
- Typically, the septic tank access will be no more than 10 feet away from your home, but in the event of an older home or a subsequent addition to the property, they may be closer than that.
- Hopefully, you have a basement to store your belongings.
- If your home does not have a basement or crawlspace, we will rely on other indications to locate your home.
- All of these pipes should converge into a single bigger pipe (usually 4 inches in diameter) that exits the house via one of the home’s walls.
- Now it’s time to go outdoors.
Check the area where the pipe comes out of the house. There may be a PVC pipe extending to the surface, with a threaded cleanout cap on it. If you find this, you’re well on the way to victory.
Take a check at the roof if your property is constructed on a slab with no basement or crawlspace beneath it. Check the roof for a vent pipe that is coming out of it. An internal vent that travels straight up, through the roof, and out the top of your home is common. If you can identify that vent, it might be possible to figure out where the pipe is departing the house. Continue walking outside from the house for a few steps, keeping an eye out for that round, square, or rectangular cover. If you can’t discover it, check for a little sunken place in the yard that could be hiding anything.
If you notice one of those, you might want to look underneath it to see if there is an entry point hidden there.
It’s possible that here is where your tank is lurking. If none of these suggestions have resulted in victory, and you begin to observe your neighbors peering through their blinds with those anxious glances that neighbors are so prone to giving.give us a call!
