How To Unclog Your Septic Tank? - THE Greywater Guide

Before you call your septic company, there are some things you can try yourself that might unclog your drain.

Avoid cleaners with chemicals. Chemical-laden cleaners often break down the enzymes in your septic system, which are in place to help break down waste.
Pour hot water down the drain.

Use baking soda and vinegar.

Can you unclog a septic tank yourself?

If you believe that the clog is in the pipe instead of the septic tank, you may be able to fix it on your own. Sprinkle the drain with baking soda, then dump vinegar into the pipe. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.
Bad Smells Coming From Your Yard.

You Hear Gurgling Water.
You Have A Sewage Backup.
How often should you empty your septic tank?

How do I know if my septic tank is clogged?

Signs of Septic System Clogging: Water and sewage from toilets, drains and sinks backing up into your home. Bathtubs, showers, and sinks draining slowly. Gurgling sounds present in the plumbing system. Bad odors coming from the septic tank or drain field.

What to put in septic tank to break down solids?

Yeast helps actively breaks down waste solids when added to your septic system. Flush ½ cup of dry baking yeast down the toilet, the first time. Add ¼ cup of instant yeast every 4 months, after the initial addition.

Can I use Drano on septic?

When functioning properly, the bacteria in a home’s septic system break down the solids in your septic tank, reducing the amount of sludge that settles to the bottom. This reaction is so intense that plumbers uniformly advise against using Drano on any clogs in your home, regardless of whether you have a septic system.

Will toilet flush if septic tank is full?

Toilets Flush Slowly When your septic tank is excessively full, your toilet may start acting odd. You might find that your toilet doesn’t fully flush or flushes very slowly and odd noises occur when you flush your toilet. These noises usually sound like gurgling or bubbling.

How do I check my septic tanks sludge level?

To measure the sludge layer:

Slowly lower the tube into the septic tank until it touches the bottom of the tank.
As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

How often should you pump your septic tank?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

1) Get on a Schedule.
2) Take Care of the System.

3) Know the Parts of Your System.
4) Check Other Possible Issues.

What causes a septic tank to back up?

Hydraulic overloading occurs when too much water rushes into the septic system at once, causing wastewater to back up into your drains. Space out high-volume activities like laundry, showering and running the dishwasher. Also, remember that unusually wet weather can contribute to hydraulic overloading.

Why is there water coming out of my septic tank?

The top of the septic tank is usually a few feet below the soil. If you see standing water above the drainfield or tank, your septic system is likely flooded. When you don’t see obvious standing water over the area, check the water level with a probe, or use an auger to dig down into the soil.

Why does my septic keep clogging?

A clogged septic tank or drain is caused by a number of things: An obstruction in the line caused by a buildup of pressure between the object and the inner circumference of the pipe. An example is a diaper stuck in the sewer drain line. There is simply too much diaper to fit through the line at once!

How do you dissolve sludge in a septic tank?

One is to inject air into the tank to try and mix the contents and break down the solids. The more common method is to use a mechanical mixer that acts somewhat like a baking mixer where the contents are mixed until they form a slurry that can be withdrawn by the vacuum pump.

What eats sludge in septic tank?

One example of a homemade remedy is to flush ¼-½ a cup of instant yeast down your toilet. The yeast eats away at the sludge and helps loosen it, breaking it down so that wastewater can get through.

Can you pour peroxide in septic system?

You May Interfere with the Drainfield The hydrogen peroxide found in some additives may be harmful to the soil in the drainfield. This can cause the drainfield to be less effective at purification. The hydrogen peroxide may also harm the bacteria found in the septic system.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.

Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field

However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.

Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.

If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.

Advertisement
s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.

Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.

4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.

If at all possible, take a shower or bath as soon as possible after working on your septic tank
When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.

5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.

Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.

6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.

Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.

In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.

If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.

2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.

It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price

3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.

It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.

4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it

Feed the auger further into the pipe each time to ensure that the clog is broken apart. Continue to guide the auger’s line into the pipe with both hands until you encounter resistance. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. Other than that, use short back and forth strokes to push and pull the auger to break up the clog. Attempt to force the auger into the jammed piece of pipe until it is able to travel freely through it

Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.

It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.

6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished

Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.

7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement

1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle

Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.

Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.

As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank

2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.

Tip: You do not need to add any more natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste in the first place. Aside from being less efficient than the enzymes that naturally reside in the tank, any additional enzymes will be ineffective. 2 Utilize less water around your home to ensure that the septic system drains correctly and efficiently Unless absolutely necessary, avoid running water in your home, since this might lead to the tank becoming overflowing. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary to do your task at the time. Any outdated or leaky fixtures should be repaired or replaced with more energy-efficient systems, such as toilets that flush less water or faucets with aerators connected.

3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.

No driving or planting should be done over the area where your septic tank is installed. Using a vehicle over the region might cause pipes going from your septic tank to collapse or break, so try to avoid doing so if at all possible. It is also possible for plant roots to grow into pipes or septic tanks, making them clog more quickly. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots don’t get into the system.

4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping

Not every septic system will be equipped with an effluent filter

However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.

5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement

A professional should examine and report back on the condition of your septic tank at least once every three years. In general, septic tanks take 3–5 years to fill, however this might vary depending on how big your tank is and how much water you use each year. To determine whether or not you require any alterations to your system’s water levels or pipes, consult with a professional provider. Any issues that the service notices should be addressed immediately to avoid a defective septic system in the future.

Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. CEO of Balkan Plumbers Inc. is a professional plumber.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Things You’ll Need

About This Article

The writers of this page have together authored a page that has been read 315,222 times.

Did this article help you?

Plumbing
Unclogging
Septic Tank

Blocked
Septic System
Pipes and Drains

How to Plumbing

A few methods for unclogging a septic tank drain, as well as suggestions for speeding up a slow drain, difficulties that may arise while unclogging a drain, and preventative steps to avoid blocked septic tanks and drains will be discussed in this article. As well as how to unclog a septic tank and strategies to handle typical septic problems that may arise as a consequence of a full septic tank or clogged septic lines, this article will teach you how to unclog a septic tank. Your kitchen sink drain or bathtub drain is attached to a specific branch line and drains at a slower rate than usual because of this.

Reasons for a clogged bath or kitchen drain:

A few methods for unclogging a septic tank drain, as well as suggestions for speeding up a slow drain, difficulties that may arise while unclogging a drain, and preventative steps to avoid blocked septic tanks and drains will be discussed in this article. Aside from that, you’ll learn how to unclog a septic tank and some ways to handle some of the most frequent septic problems you could encounter, such as a full septic tank or a clogged sewage line, as well as how to prevent septic problems in the first place. A branch line has been attached to the kitchen sink or bathtub drain, causing the drain to run slower than usual.

Common Causes of Clogged Drains

Many various things may cause your kitchen sink drain or bathroom drains to get clogged, but the most typical reasons of clogged drains are still leftover food and grease from the kitchen that is poured down the kitchen sink, as well as hair that is flushed down the bathtub and shower drain. Another typical reason of clogged drains is the buildup of paints and other chemicals inside the drain pipe, which solidify and block the line. In many cases, you will be able to unclog a blocked kitchen sink or a clogged bathtub drain on your own.

Ways to unclog a drain:

Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots

Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.

Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet.

Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.

Ways to avoid clogged drains and a full septic tank:

Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.

Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.

Possible causes for a slow drain:

A section of the main drain pipe has become plugged
An obstruction has formed in the drain intake or outflow of the septic tank

A section of the percolation pipes has become jammed
The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
One of the distribution boxes has been blocked off

Ways to unclog a main drain or full septic tank:

To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Other works make use of the dirt.

Preventive measures to avoid a blocked main or slow drain:

Please be considerate of your septic tank. It is intended solely for the disposal of organic waste materials. Avoid depositing non-biodegradable and inorganic garbage in landfills. They will very certainly overflow a septic tank and interfere with the regular operation of the septic tank. Use drain filters in your toilet and kitchen to catch hair and solid things that are flowing down the drain. In order to avoid the septic tank from freezing in the winter, it should be winterized. If you are considering a lengthy trip, you should empty your septic tank and seek professional assistance. Winterization is dependent on the area and weather conditions. A simple investment here will spare you from all of the difficulties you may face throughout the winter.

External References

Natural ways to unclog a drain include the use of vinegar, baking soda, and water (theGoodHuman.com), among others. On eHow.com, you can learn how to unclog a sink naturally.

A septic system is a wastewater treatment system that is self-contained and located underground. This type of system is most commonly used in rural regions since the distance between households is so great that centralized sewer systems are not particularly cost effective in these places. They are used to dispose of domestic garbage on-site, and because of their basic design, they are less expensive to install and maintain than other methods. As a matter of fact, they are typically built in a homeowner’s backyard, and as a result, they do not necessitate the use of sewage lines, resulting in them being less harmful to the environment.

Wastewater from the residence is channeled through the sewage pipe and into the sewer system.

Overflowing toilets on a consistent basis
It is the drains that are making these strange gurgling sounds. When you empty a sink, the water will back up into the shower or bathtub. You will see that there is an overflow where your washing machine is positioned. If foul odors pervade the air or garbage is visible on the ground, it is time to act. Your drains are emitting an unpleasant odor
Your toilets flush at an inordinately slow rate

Streams and ditches in the vicinity get contaminated as a result. You’ll see dips in the earth around the soakway drain or the septic tank
These are called septic tank dips.

How to Solve a Septic Tank Clogging Problem

There will be times when you have septic tank problems, but you will not always have to dig up your tank or drainfield to remedy the problem. When you dig up your septic tank, the last thing you want is for your yard to become a mucky mess that will take days to clean up once you have finished digging. Following that, here are some suggestions to assist you in unclogging your septic tank: 1: Determine what is causing the blockage to occur. As previously said, you do not always have to dig out your tank when you have a clog in your toilet.

In reality, the problem may just be a buildup of debris that has accumulated through time and has to be removed.

Reducing the Clogging of Septic Tanks

Maintenance is always essential in ensuring that you do not suffer as a result of a clogged septic tank. Yes, sludge accumulates over time, but taking proper care of your system now will save you a lot of hassle in the future. Although it is advised that you get your tanks cleaned out once a year, the frequency with which you do so is determined by the following factors:

The number of people that live in your house

The size of your home. The quantity of wastewater produced (the amount created is, of course, based on the number of people living in your household)
And The amount of particles present in the wastewater (for example, the use of a garbage disposal influences the amount of solids present in the wastewater)

It is not necessary to do routine maintenance on your septic tank’s absorption field. Nevertheless, this does not imply that you should take it for granted. Fortunately, there are certain things you can do to ensure that it is always working and protected.

Do not drive automobiles, trucks, or heavy equipment through the field. Do not grow trees or bushes in a field since the roots of these plants can get into the irrigation system and cause a blockage. Don’t use hard surfaces to cover the playing field (concrete, asphalt, etc). Grass is the most effective ingredient to employ if you want to provide shelter since it prevents erosion and drains excess water. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the fields.

How to Clear a Clogged Septic Line

Driving automobiles or large-scale equipment across the field is prohibited. Trees and bushes should not be planted near irrigation lines due to a risk of root intrusion and clogging. Don’t use hard surfaces to cover the field (concrete, asphalt, etc). It is recommended that grass be used while providing cover, as it reduces erosion and eliminates excess water; however, other elements such as trees and shrubs can be used as well. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the field.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Water is intended to go down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train itself. Though it is most often the result of something that was flushed down the toilet, the source of the problem can sometimes be found deep inside the heart (and pipes) of the septic system itself. Septic system backups may be caused by tree roots. Obviously, if this is the case, you’ll want to consult with a specialist right away!

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

In these situations, it is critical that you retain the services of a qualified specialist. A service-oriented firm committed to delivering outstanding septic tank cleaning and septic tank pumping services to homes in the Norway, Minnesota area. Norway Septic Inc.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

How to unclog your leach field

A SHOCK TREATMENT CAN SAVE YOU UP TO $150. The leach field, also known as a drain field, is the area where effluent from the septic tank is disposed of. In this stage of the septic system, a network of perforated PVC drain pipes, crushed stone, and a layer of unsaturated soil are combined to form a septic system. Gravity is typically responsible for the movement of wastewater from the septic tank to the leaching bed. Nevertheless, when the conditions do not permit the use of gravity to transport the wastewater to the leaching bed, a pumping station can be utilized to transport the wastewater to the leaching bed.

In this last filtering phase, bacteria and other microorganisms help to further clean and disinfect the wastewater before it reaches the groundwater.

How is a leach field made?

It is critical that the leaching bed functions well in the wastewater treatment system, and if it does not, the entire system will be adversely affected. It is also critical to prevent structural problems from occurring in the first place by ensuring that the building is designed correctly. As a result, only fully licensed contractors are permitted to do such a project. But, first and foremost, you will need to conduct a percolation test as well as a comprehensive review by an engineering professional.

A quick percolation rate is seen in sandy soils; whereas, a sluggish percolation rate is found in clay soils.

Steps followed when building a leach field

The moment has come to start digging the trenches after all of the testing have been performed and the building plan has been finalized and approved by the project team. The number of trenches that will need to be built depends on the size of the septic tank and the volume of wastewater that will be released into the leaching field throughout the construction process. Each trench should have the same breadth as the others (approximately 3-4 feet). Furthermore, the trenches should be dug with a small downhill slope
When the trenches have been created, they should be filled with crushed stone to prevent erosion. The crushed stone bed should be at least one to one and a half inches thick and evenly distributed throughout the ditches. Perforated pipes are installed on the ground after this phase, which is significant because it provides for improved drainage of effluent under the perforated pipes.

How long does a septic leach field last?

Weeping beds should last at least 25 years if they are well-maintained, but they may live much longer or shorter depending on a variety of conditions. The majority of leaching fields collapse as a result of biological or hydraulic overstress. Hydraulic overload occurs when an excessive amount of water is discharged into the septic tank. Consequently, it is advised that duties such as washing be spread out throughout the course of the week rather than being completed in a single weekend session.

When an excessive amount of organic material enters the leaching field, this is referred to as biological overloading.

As the owner of a septic system, you must exercise extreme caution when it comes to what you discharge into the wastewater treatment system. The only solid waste that should be disposed of in your septic system is toilet paper and human waste (feces). Aside from that, we

What is clogging your leach field?

The leaching bed, like the septic tank, is not meant to survive indefinitely. All leaching fields will need to be replaced at some point in the future. However, with careful care and maintenance, your leaching bed should last for many years, if not for a lifetime. The leaching bed utilizes aerobic bacteria on the receiving soil to filter wastewater before it reaches the groundwater table, preventing groundwater contamination. These bacteria decompose organic materials and aid in the elimination of viruses as well as the reduction of nutrients in wastewater.

Clogging in the leaching bed, on the other hand, causes this process to be slowed down, resulting in unavoidable environmental contamination.

Biomat

During the wastewater treatment process, a black, gelatinous layer forms beneath the distribution pipes as the wastewater passes through the leach field. Rather than sludge, this layer is really a biomaterial sludge known as “biomat.” Because the biomat is waterproof, it significantly minimizes the amount of wastewater that percolates into the soil. In most cases, this biomat is formed of organic waste and anaerobic bacteria that have attached themselves to the soil or broken stone. The organic stuff in the effluent provides food for these bacteria.

Contrary to this, it aids in the further filtering of wastewater by reducing the rate of infiltration and retaining the organic matter before the water is allowed to reach the soil.

The more the black gelatinous sludge collects in the vessel, the worse it becomes.

How do you know if your leach field is failing?

It goes without saying that the most visible indicator of a failing leaching bed is when wastewater overflows and reaches the surface. The effluent will rise to the top of the soil or, in certain situations, will pour out the end of the trenches if the receiving soil in the leaching bed is unable to absorb any more water from the receiving soil. The most common reason for the effluent to stop flowing is due to an excessive amount of biomatis being created. Check out the following indicators to determine if you need to unclog your leach field:.

Sluggish drains and toilets

Prior to the drain field failing altogether, you may notice that water is draining through the home at a slower rate. The drains will continue to function as long as there is enough space for the water to flow. On the other hand, it is possible that the water is draining more slowly. If you neglect this problem, which is caused by the leach field, the situation will deteriorate over time and become more serious.

It is possible that the septic tank will become overflowing and that the water will be unable to penetrate into the earth at all. Of course, there are a variety of other plumbing issues that can cause slow drains, so we urge that you search for other indicators as well.

Septic odors

Septic tank scents might be detected in the vicinity of the leaching area or within the house itself. Another sign that the leaching field is failing is the presence of rust. Due to the fact that it is so uncomfortable, this is perhaps one of the easiest indicators to recognize. To determine if you are experiencing the rotten egg smell, first check to see if there has been a buildup of organic material in the plumbing system. You may either use an ecologically friendly drain cleaner (such as SeptiDrain) or check your septic tank for abnormally high water levels to resolve the problem.

Sewage backing up in the house

In the vicinity of the leaching area as well as within the home, septic tank scents might be detected. Yet another sign that the leaching field is failing to do its function. Due to the fact that it is so uncomfortable, this is arguably one of the simplest indications to spot. To determine whether or not you are experiencing a rotten egg smell, check to see whether there is a buildup of organic debris in your plumbing system. It is possible to use a septic tank drain cleaner that is ecologically friendly (SeptiDrain) or to check for abnormally high water levels in the tank.

Greener and taller grass around the drainfield

A sign that your leach field is not operating correctly is the presence of higher, greener grass in the area where it’s supposed to be placed. When wastewater is unable to penetrate the soil, pressure can force it to rise to the surface, causing it to become visible. Because of the nutrients in the wastewater, the grass might grow more quickly and seem greener as a result of this.

Puddles of water in the yard

Puddles on the field may indicate that a hydraulic overload has forced water to come to the surface. If this is the case, contact the field superintendent immediately. When a leach field becomes blocked, the pressure builds up, forcing the water to rise. Large amounts of wastewater can practically pool on the ground when released into the environment. If the water smells like rotten eggs, avoid touching it and keep your children away from the area until the scent has been eliminated. There have been instances where perforated pipes in the leach field have either disconnected or broken.

Otherwise, a blockage is more likely to be the source of the problem.

Soil sinking or collapsing over the leachfield

The presence of excessively damp soil where the leaching bed is placed may also be an indicator that the leaching bed is no longer performing effectively, according to the manufacturer.

How to unclog your leach field?

When you find an issue with your leaching bed, you should make an attempt to fix it as quickly as possible. If this is not done, the condition may worsen and result in wastewater overflows. Those spills are potentially hazardous to both you and the environment. Also prohibited is the pollution of the environment, and local authorities may order you to replace your septic system if you fail to comply with the law. In addition to promoting the growth of biomat, as previously described, the discharge of organic particles into the leaching bed generates an imbalance in the natural water filtration system.

As a consequence, a waterproof biomaterial sludge is formed, and this sludge significantly reduces the rate of infiltration of wastewater into the receiving soil, which is abnormal. Biomatis is not a threat to your septic system.

How much does a new leach field cost?

Choosing to repair your leaching bed will almost certainly necessitate the replacement of your complete septic system as well. You will require a fresh percolation test as well as an appraisal by an engineer with appropriate qualifications. When using a standard septic system, you may expect to pay between $5,000 and $12,500 for the installation and maintenance. However, if you require the installation of a more sophisticated system, the cost of the replacement will be significantly higher (between $15,000 and $30,000).

As a result, we highly recommend you to attempt to resolve the problem first by selecting one of the alternative options that have been provided.

PROMOTION TO ASSIST YOU IN UNCLOGGING YOUR LEACH FIELD: By taking advantage of our monthly incentives, you may save money on a shock treatment.

Conclusion

A blocked leach field will jeopardize the integrity of the entire system. It can result in sewage backups in the house, septic smells, sewage leaking on the yard, and groundwater contamination, among other problems. Unclogging your leachfield with shock treatment can help you to avoid these and other problems associated with leachfield failure in the future. It is the injection of billions of bacteria and enzymes into the sewage system through the use of biological additives that is known as shock treatment.

This septic-safe solution from Bio-Sol is manufactured from bacteria and enzymes, and it will clear your leach field without harming the bacteria or enzymes in your system.

How to Get Rid of Septic Tank Clogs

That feeling you get after flushing the toilet and nothing comes out is wonderful, isn’t it? It might be amusing to hear your toilet gurgle or to hear the water flowing continually, but it can also be frightening to hear the water level climb as you watch it. It’s an unpleasant situation, not to mention that it necessitates a great deal of hard effort and elbow grease in the process of plunging and cleaning up the subsequent mess. When anything gets stuck in your pipe or your toilet makes a mistake, you may have blockages and backups.

Clogs can form inside your septic tank from time to time, causing blockages in the tank and drainage troubles to arise.