What is the best way to cover a septic tank?
- Mulch can be added to the area covering the septic tank and drainfield if snow cover is inconsistent – especially if grass or other vegetation cover is not available. It is always best to limit any traffic on top of the drainfield (vehicular, human or animal).
What sizes do septic tank lids come in?
Available in 12″, 16″, 20″ and 24″ diameters. Green only. 12″ Tall Riser – For septic tanks.
Can you replace the lid on a septic tank?
Concrete septic tank covers require replacement when they develop cracks or other damage. These can be purchased online or at a home improvement store near you. Many septic tanks have risers so the lid is visible above ground.
What can I use as a septic tank lid?
The Do’s For Hiding Your Septic Tank
- Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view.
- Place a light statue, bird bath or potted plant over the septic lid.
- Septic tank risers and covers are an alternative to concrete and blend into green grass.
How many lids are on a septic tank?
In order to make repairs or perform regular maintenance or cleaning/pumping of the tank, access must be provided. There are usually two lids located at the top of the septic tank-one located over the inlet “T” and one located over the outlet “T” (see “Septic Components: Septic Tanks”).
How thick should a septic tank lid be?
(12) The top, bottom, ends, and sides of the tank must have a minimum thickness of two and one-half inches. (13) A minimum 28-day concrete compressive strength of 3,500 pounds per square inch shall be used in the construction of the septic tank, concrete access riser and riser cover.
How do you measure a septic tank lid?
You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.
How do you remove a septic tank lid?
Some tank lids have built-in handles to pull on, but others require a pry bar to lift them open. If the lid comes with handles, ask for the assistance of a friend or family member to remove the lid. If it doesn’t, push a screwdriver into the seam around the lid and insert the pry bar into the gap. Then, press down.
Can you put mulch over septic tank?
Gardens. Landscape fabric, plastic, bark, or mulch should not be used over your septic system. These materials reduce air exchange while bark and mulch also retain excess moisture. Adding more than a few inches of soil over the drainfield, such as for raised beds, limits air exchange and can lead to compaction.
Should septic tank lids be buried?
In most cases, all components of the septic tank including the lid are buried between 4 inches and 4 feet underground. Unless the septic tank has special risers that position the lid at ground level, you’ll have to dig for it.
How many lids should a concrete septic tank have?
Two or three lids may be included in your system. The average size of a sewage tank is approximately 5 feet by 8 feet. The lid is buried between 4 inches and 4 feet underground in most cases.
How thick is a concrete septic tank lid?
The exterior walls of the septic tank are made of concrete, normally 4 inches thick.
How much does a septic tank lid weigh?
The concrete covers also weigh 60 – 80 lbs. Because of the weight, many people are discouraged from removing the cover and doing an inspection. Modern plastic septic tank riser rings typically weigh less than 30 pounds.
Polylok 30″ Heavy Duty Cover/Lid For Corrugated Pipe (PN: 3010-C30) – – Amazon.com
5.0 stars out of 5 for this product It’s difficult to locate the right size. On August 24, 2020, the United States will conduct a review. After hunting for a 30 inch septic riser cap for quite some time, I was fortunate enough to come across one on Amazon by chance. As you can see in the photo, my previous concrete cap was cracked and shattered, providing a safety danger to those who were working on the project. This cap is a great fit, and it even comes with lag screws to help you install it.
Reviews with images
On August 24, 2020, a reviewer in the United States wrote, “Verified Purchase.” After hunting for a 30 inch septic riser cap for quite some time, I was fortunate enough to come across one on Amazon by chance. As you can see in the photo, my previous concrete cap was cracked and shattered, providing a safety danger to those who were working on the project. This cap is a great fit, and it even comes with lag screws to help you install it. 5.0 stars out of 5 for this product It’s difficult to locate the right size.
After hunting for a 30 inch septic riser cap for quite some time, I was fortunate enough to come across one on Amazon by chance.
- This cap is a great fit, and it even comes with lag screws to help you install it.
- Because it didn’t fit and returning it was nearly as expensive as purchasing the lid, I decided to keep it.
- This resolved the issue with our septic cover.
- This covers the well that leads to our septic system.
- It is being returned to the manufacturer because it is simply too large.
- The hubs took measurements of the exterior.
- I was able to save several hours of labor since these cesspool covers were a great fit.
- On September 21, 2016, a verified purchase was made in the United States.
- Cover the septic tank with a strong, long-lasting plastic.
- The article was reviewed in the United States on May 27, 2016.
- On September 4, 2016, a review was conducted in the United States.
Purchase that has been verified Product is of high quality and performs admirably. 5.0 stars out of 5 for this product It’s a dream come true! On September 4, 2016, a review was conducted in the United States. Product is of high quality and performs admirably. The photographs in this review
Septic Tank Risers, Lids, and Covers
The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.
- Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
- ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.
- No.
- Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
- It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.
- IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
- If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
- Yes.
- IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS?
- The Polylok Septic Tank Risers are assembled using stainless steel screws that allow them to be connected to one another.
THE POLYLOK SEPTIC TANK RISER ADVANTAGE
Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:
FACTORY INSTALLED GASKETS
Riser systems are available in a variety of shapes, sizes, and designs on today’s market. Aside from being extremely durable, the Polylok septic tank risers are also quite affordable. However, these are the most significant of these reasons:
INTERNAL STRUCTURAL RIBS
The Polylok risers are reinforced with structural ribs that run internally around each riser segment, providing them with exceptional strength and allowing them to maintain their shape even after the hole is backfilled with dirt. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.
Because the Polylok products are fully smooth on the outside, they will not cause any problems in frosty environments!
LOW PROFILE RISER LIDS WITH HANDLES
The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.
LARGE TANK ADAPTER RING
It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!
STAINLESS STEEL SCREWS INCLUDED
At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.
Septic Tank Lids for Corrugated Pipe
ALL CORRUGATED PIPE PRODUCTS ARE SHIPPED FREE AND IN QUICK TIME ON THE SAME DAY.
Polylok 24′ Corrugated Pipe Cover
The Polylok 24″ Heavy Duty Lid is designed to accommodate 24″ corrugated pipe, either single wall or double wall, and has a diameter of 24″. Specifications of the product
- This fitting is for 24″ single and double wall corrugated pipe
- It is flat with a skid resistant surface
- It is heavy duty in strength
- It is currently in stock.
| Includes Factory Installed Gasket andStainless Steel Screws For AttachmentTechnical Specifications |
Put Your Trust in the Professionals With Over 25 Years of Wastewater Industry Experience.
Polylok 30′ Corrugated Pipe Cover
It is designed to accommodate 30″ single wall or double wall corrugated pipe, and it is made of Polylok heavy duty material. Specifications of the product
- Flat with a skid-resistant surface
- Heavy-duty strength
- Fits 30″ single and double wall corrugated pipe. Availability: in stock
| Includes Factory Installed Gasket andStainless Steel Screws For AttachmentTechnical Specifications |
Do you require assistance? Call us toll-free at 1-877-925-5132 for free, professional assistance.
Polylok 18′ Corrugated Pipe Cover
For use with 18-inch single or double wall corrugated pipe, the Polylok 18-inch Heavy Duty Lid is intended to fit. Specifications of the product
- Flat with skid resistant surface
- Heavy duty strength
- Fits 18″ single and double wall corrugated pipe
- IN STOCK
| Includes Factory Installed Gasket andStainless Steel Screws For AttachmentTechnical Specifications |
ALL CORRUGATED PIPE PRODUCTS ARE SHIPPED FREE AND IN QUICK TIME ON THE SAME DAY.
Polylok 15′ Corrugated Pipe Cover
The Polylok 15″ Heavy Duty Lid is intended to accommodate corrugated pipe with a wall thickness of 15″ single wall or double wall. Specifications of the product
- This fitting is for 15″ single and double wall corrugated pipe
- It is flat with a skid resistant surface
- It is heavy duty in strength
- And it is currently in stock.
| Includes Factory Installed Gasket andStainless Steel Screws For AttachmentTechnical Specifications |
DO YOU REQUIRE ASSISTANCE? DON’T HESITATE TO CONTACT US AT 1-877-925-5132 FOR EXPERT ASSISTANCE.
Polylok 12′ Corrugated Pipe Cover
It is intended to accommodate 12″ single wall or double wall corrugated pipe, and it is made of Polylok heavy duty material. Specifications of the product
- Fits 12″ single and double wall corrugated pipe
- Flat with skid resistant surface
- Heavy duty strength
- In stock
| Includes Factory Installed Gasket andStainless Steel Screws For AttachmentTechnical Specifications |
With over 850 septic-related products, we have the largest selection of septic-related products available on the internet.
Polylok 24′ Corrugated Pipe Adapter
The Polylok 24″ Corrugated Pipe Adapter is intended to be used with any concrete septic tank in order to convert 24″ corrugated pipe to it. Specifications of the product
- Corrugated pipe is connected to the septic tank by means of this adapter. It covers openings up to 25 x 25 inches square and up to 27 inches in diameter round. Availability: AVAILABLE IN STOCK
ALL CORRUGATED PIPE PRODUCTS ARE SHIPPED FREE AND IN QUICK TIME ON THE SAME DAY.
Polylok 18′ Corrugated Pipe Adapter
The Polylok 18″ Corrugated Pipe Adapter is intended to be used with any concrete septic tank to convert 18″ corrugated pipe to it. Specifications of the product
- Corrugated pipe is connected to a septic tank using this adapter. It also covers square openings up to 25′ x 25′, as well as round openings up to 27′ diameter. Availability: AVAILABLE IN STOCK
Put your trust in the professionals with over 25 years of experience in the wastewater industry.
Adapter Ring Installation KitHighly Recommened
It includes everything you need to quickly and easily install and attach the Polylok Adapter ring to your septic tank, including all of the necessary hardware. Included in the Anchor Kit is:
- The following items are available: (1) 20-foot roll of Butyl Sealant
- (8) Concrete Wedge Anchors
- And (1) Masonry Drill Bit
Do you require assistance? Call us toll-free at 1-877-925-5132 for free, professional assistance.
Butyl Sealant Rope
The butyl sealant rope is used to create a watertight seal between the adapter ring and the septic tank. The butyl seal rope is 5/16′ round and comes on a 20 foot roll.Availability: IN STOCKItemASTM-C990Best Price on Septic Tank Risers & Covers Online Guarenteed!
Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.
- Risers from Tuf-Tite and Polylok are available for purchase.
- Please keep in mind that Tuf-TitePolylok products are incompatible with one another.
- Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true.
- PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK
Septic Tank Riser Kits
Prices include free delivery within the continental United States. Our Septic Tank Riser Kits are proudly made in the United States of America. Orders placed before 12 p.m. EST are dispatched the same day through UPS ground. Dimensions of the Septic Tank Riser – Click to enlarge. Watch this video to see how simple it is to install an Aero-Stream Septic Tank Riser! Parts and pieces that make up our Septic Tank Risers Features of our Septic Tank Risers are as follows:
- Ready to install – no need to cut anything on the job site
- Lid with a low profile
- Safety Barrier that is built in
- Installation is simple. Fits all tanks with a flat top
- The installation of a Septic System Saver is made easier by this device.
Purchase the safest, highest-quality Septic Tank Riser available on the market! We’ve thrown in our Premium Low Profile lid at no extra charge. Coverage with a Low-Profile Finish
- The low-profile lid raises the riser by only 0.5 inch. HDPE structural foam in a green color
- Almost flush with the surrounding yard
- Maintenance and mowing will be less difficult.
At no additional cost, our Septic Tank Risers now feature our Premium Low Profile Lid! Safety Barrier is a $75 value and is included at no additional cost! With Secondary Safety Barrier on the Flange of the Adapter
- A safety barrier has been installed beneath the septic tank riser lid. Tank can be maintained without having to remove it. It is possible to remove it for servicing the baffles. Fits all shapes of holes, including round, square, rectangular, and other shapes
- A patent application is pending. HDPE material that has been 100 percent recycled
The suggested retail price is $219.00.
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Contains a lid and a 7-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $248.0010′′ Septic Riser (MSRP $248.00) (AS-R10)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 10′′ riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $283.0013′′ Septic Riser (MSRP: $283.00) (AS-R13)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 13-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Typical Retail Price: $312.0016-Inch Septic Riser (AS-R16)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Contains a lid and a 16-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $343.0019′′ Septic Riser (MSRP: $343.0019′′ Septic Riser) (AS-R19)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 19-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $365.0023′′ (AS-R23)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 23-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
The MSRP for this item is $383.0026′′ Septic Riser (AS-R26)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 26-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $413.0029′′ (AS-R29)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 29-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $443.0032′′ Septic Riser (MSRP $443.0032′′ Septic Riser (AS-R32)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 32-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $466.0035′′ (AS-R35)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 35-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $489.0038′′ Septic Riser (MSRP: $489.0038′′ Septic Riser) (AS-R38)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 38-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $513.0041′′ (AS-R41)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 41-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $572.0044′′ (AS-R44)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 44-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MSRP of $595.0047′′ Septic Riser with an MS (AS-R47)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- The set includes a cover and a 47-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
MSRP: $619.0050′′ Septic Riser, MSRP: $619.00 (AS-R50)
- Increases the height of the tank entrance above the ground level, making maintenance easier. The plastic adapter ring is 30-1/4′′ x 30-1/4′′ and has an inner diameter of 23-1/2′′. Covers all entrance forms, including round, square, and rectangular openings, among others
- Includes a cover as well as a 50-inch riser pipe. Installation is straightforward, and the kit includes all necessary hardware and sealants.
The suggested retail price is $207.00.
- You supply the pipe with an inner diameter ranging from 23.5′′ to 24.5′′
- Fits ADS 24′′ (23-1/2′′) and old ADS 24′′ inside diameter double wall corrugated pipe
- Plastic adapter ring measures 30-1/4′′ x 30-1/4′′ with an internal diameter of 22-1/2′′
- It can accommodate openings of various forms, including round, square, and rectangular. Included are all of the necessary hardware, sealant, and an installation instructions.
The suggested retail price is $97.00. The Riser AdapterFlange for Septic Tanks with Safety Barrier
- ADS 24′′ (23-1/2′′) inner diameter double wall corrugated pipe and old ADS 24′′ inside diameter double wall corrugated pipe are both compatible with four (4) stainless steel screws to attach the Adapter Flange/Safety Barrier to the Riser Ring. Plastic adapter ring measures 30-1/4′′ x 30-1/4′′ with an internal diameter of 22-1/2′′
- It can accommodate openings of various forms, including round, square, and rectangular. Instructions for installation
MSRP: $102.0024′′ Premium Low Profile Septic Tank Riser Lid (MSRP: $102.0024′′ Premium Low Profile Septic Tank Riser Lid)
- The lid has a low profile and is only 1/2 inch high. Inside diameter double wall corrugated pipe will suit both new ADS 24′′ (23.5′′) and old ADS 24′′ inside diameter double wall corrugated pipe HDPE structural foam in a green color
- Three square drive bits are supplied, as is a rubber gasket. Almost flush with the surrounding yard
- The mowing and upkeep are less complicated.
The suggested retail price is $207.0024′′. A riser pipe connector for a septic tank that comes with a safety barrier kit.
- Used with ribbed and smooth walled pipe with an ID of 24 inches
- Inside diameter double wall corrugated pipe will suit both new ADS 24′′ (23.5′′) and old ADS 24′′ inside diameter double wall corrugated pipe current 24 inch riser is lengthened
- Constructed of 24′′ ID plastic sewage tank riser pipe and connects it to an existing concrete or plastic septic tank riser HDPE material that has been 100 percent recycled
- Four (4) stainless steel screws are supplied for attaching the flange to the riser pipe.
The suggested retail price is $26.00. Kit for installing a septic tank riser
- In addition to the Install Guide, you will need 14 1/2 feet of 3/4 inch x 1 inch Butyl Sealant Rope
- Four (4) Tapcon Anchor Screws for attaching the Adapter Flange to the Septic Tank
- And four (4) Stainless Steel Screws for attaching the adapter Flange to the Riser Ring.
Plastic Septic Tank Riser Pipe
Septic Tank Riser Pipe is constructed of high-density polyethylene (HDPE). They will not disintegrate in the same way that concrete riser pipe does. A brand new safety barrier is offered at a significant discount. Detailed Dimensions of a Septic Tank Riser Pipe – Click to Enlarge With every septic tank riser pipe purchases, you will receive a new Septic Tank Riser Safety Barrier at a significant discount! The suggested retail price is $112.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $140.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $178.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
15-inch Septic Tank Riser Pipe (MSRP: $212.00)
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $242.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $272.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $307.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $330.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $360.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $395.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $419.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $448.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $508.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $531.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
The suggested retail price is $555.00.
- Double wall corrugated pipe with an ID of 23 1/2 inches
- NEW Safety Barrier incorporated
Septic tank riser kit Plumbing at Lowes.com
A leaking pipe is one of the most annoying things that can happen. When left ignored, they can become damaging over time, resulting in the need for costly repair work to be performed. However, with the appropriate expertise and the right plumbing gear, you can stop a leak before it causes extensive water damage that is expensive to repair. Identifying the Proper Fit Various pipe fittings will wear out over time and will need to be changed or repaired as a result. Lowe’s provides the pipe fittings you need for your project or repair, whether you’re looking for PVC or copper pipe fittings.
- Large-scale projects or extensive repairs In some cases, you may require plumbing materials for more extensive repairs or replacements.
- Our Water Heater Buying Guidecan assist you in determining which water heater is the best fit for your needs.
- Troubleshooting Your Toilet Issues When it comes to plumbing problems in the home, one of the most frequently encountered is with the toilet, which is one of the most frequently used appliances.
- In some cases, more than a plunger is required to solve the problem.
- We also have whole toilet repair kits available, as well as individual toilet components such as flappers, chains, and levers.
Plumbing problems may take up a lot of your time and money, and they can be quite inconvenient. The tools and skills you’ll need to address issues and complete projects correctly the first time are available at Lowe’s.
Risers & Adapters « The Septic Store
Regardless of whether your septic tank is made of plastic or concrete, it will need to be pumped every 3-5 years. If your tank is buried, this will necessitate the excavation of the site. By utilizing risers and tank adapters, you can elevate the lids of your concrete or plastic tank up to grade, allowing you to access the tank all year long for pumping, filter cleaning, and any other necessary maintenance. Having a clog and backup in your tank in January is something you don’t want to happen to you.
Polylok Adapters
Tank adapters and adapter rings are available from Polylok for the conversion of concrete and plastic tanks. It is possible to prepare your current tank for the Polylok riser system and lids by fitting the adapters on the tank’s existing risers. Available in two sizes: 20′′ and 24′′ in diameter.
Orenco AdaptersLids
In addition to concrete tank conversions, Orenco also provides solutions for plastic tank conversions. Their heavy-duty fiberglass adapters and lids are intended to operate with IPEX’s ultrarib or perma-lok pipe, which are both extremely robust and long-lasting.
EZset
Infiltrator Systems manufactures a product known as EZset. EZset not only serves as the principal riser system for Infiltrator’s brand of IM and TW series tanks, but it also provides tank adapters and lids for use when converting an existing concrete tank into a storage tank.
Premier Tech
Premier Tech’s tank adapter is one of the most substantial on the market. There are certain concrete tanks that have existing apertures that are bigger than the normal 30′′ tank adapter can handle.
24”x 32” Septic Tank Riser Kit – Wholesale Septic Supply
The inner diameter and height of our septic tank riser kits are specified in millimeters. Each of their names has two numbers: the first represents their inner diameter in inches, and the second represents their height in inches. This implies that a 24″x 32″ riser kit has an inner diameter of 24 inches and a height of 32 inches, and that a 24″x 32″ riser kit has an inner diameter of 24 inches and a height of 32 inches. The bottom ring of the riser kit is responsible for attaching the assembly to the septic tank’s flanged bottom.
For example, an adapter ring with an inner diameter of 24 inches and an outside diameter of 30 inches is included in a 24″x 32″ package.
If the adapter ring is secure, it is OK if the riser system is somewhat bigger than the hole if the adapter ring is secure.
2432srsdome is the part number.
* If you want to switch from a domed lid to a flat lid, there is an additional price.
Preparation for the installation of your new riser kit includes the removal of any concrete covers.
If the wrong size is ordered, the client is responsible for the cost of return postage. Because there is a 25% restocking charge on these big riser goods and return shipping is rather expensive, you should be certain that you get the proper size the first time.
