1250 Gallon Plastic Septic Tanks
| Tank / Capacity | Length | Size |
|---|---|---|
| 1250 Gallon Septic Tank | 116″ | 116″ L 55″ W 70″ H |
| 1250 Gallon Low Profile Septic Tank – FL Approved | 157″ | 157″ L 60″ W 51″ H |
| 1250 Gallon Low Profile Septic Tank | 157″ | 157″ L 60″ W 51″ H |
| 1250 Gallon Low Profile Septic Tank – Intended For Use In IL | 157″ | 157″ L 60″ W 51″ H |
10
- 1250 Gallon Septic Tank Details ; Tank dimensions: 8’ Long 5’8” wide 6’ Tall: Number of bedrooms supported: Up to 4 – Minimum size now required: Pre-assembled: Yes: Ideal for high water table: No but our 1250 gallon monolithic septic tank is. Average retail cost: $1125: Number of covers (lids) 2: Can come in traffic rated (H20) capacity: Yes: Concrete strength
What is septic tank length?
Standard size of septic tank in feet:- standard size of septic tank should be 5 feet long by 2.5 feet wide by 3.3 feet in depth. This septic tank has capacity of 1000 litres of liquid wastages ideal for 5 users of house hold.
How often should a 1250 gallon septic tank be pumped?
A: As a general rule, a septic tank should be pumped and emptied every 3 to 5 years. Homes outside a city may rely on septic tanks since they don’t have access to city sewer lines.
How far apart are the lids on a 1250 gallon septic tank?
The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid.
How often should a 1200 gallon septic tank be pumped?
How Often Do You Need To Have Your Septic Tank Pumped? As a general guideline, a septic tank needs to be pumped and emptied every 3 to 5 years. Houses outside a city may count on sewage-disposal tanks since they do not have access to city sewer lines.
How long can a septic tank go without being pumped?
You can wait up to 10 years to drain your tank provided that you live alone and do not use the septic system often. You may feel like you can pump your septic tank waste less frequently to save money, but it’ll be difficult for you to know if the tank is working properly.
How long does it take to fill a 1500 gallon septic tank?
It takes years between having the tank pumped for the septic tank to fill to its capacity. The average usage for a family of four will fill a septic tank to its working capacity of 1000 – 1500 gallons in approximately one week.
Do septic tanks always have 2 lids?
A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
What size are septic tank lids?
Available in 12″, 16″, 20″ and 24″ diameters. Green only. 12″ Tall Riser – For septic tanks.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
1250 Gallon Septic Tanks: Precast Concrete
Precast concrete tanks, such as our 1250-gallon tank, are a suitable traditional septic tank size for a four-bedroom home. New Hampshire concrete tank sizes are most commonly found in this configuration.
1250 Gallon Septic Tank
Each 1,250 gallon septic tank that A.J. Foss creates from precast concrete is intended to hold up to 1,250 gallons of liquid waste, which is the maximum amount of liquid waste that can be contained in one tank. Our tanks meet or exceed all of the ASTM C 1227NPCA best-practice criteria. This sort of mid-seam styleconcrete septic tankallows the pipe from the home to be routed to either of the tank’s side or center intake locations. The same choice is available for the tank’s outlet drainage pipe, which may be extended out to the leach field from either the tank’s side or middle outlet drainage pipe.
If you have any questions regarding the broad selection of sizes and styles of one and two-compartment septic tanks and accessories that we produce at our state-of-the-art plant, please contact one of our knowledgeable septic specialists at A.J Foss.
| 1250 Gallon Septic Tank Details | |
|---|---|
| Tank dimensions | 8’ Long5’8” wide6’ Tall |
| Number of bedrooms supported | Up to 4 – Minimum size now required |
| Pre-assembled | Yes |
| Ideal for high water table | No but our 1500 gallon monolithic septic tank is. |
| Average retail cost | $1250 |
| Number of tank lids (covers) | 2 |
| Can come in traffic rated (H20) capacity | Yes |
| Concrete strength | 5,000 PSI |
| What are its gallons per vertical inch | 23 |
| Weight | 11,500 lbs. |
| Fiber reinforced | Yes |
| Number of inlets boots (Up to schedule 40pipe can slide through) | 3 |
| Height of inlet from bottom of tank to bottom of pipe | 63” |
| Number of outlets boots (Up to schedule 40 pipe can slide through) | 3 |
| Height of outlet from bottom of tank to bottom of pipe | 60” |
| Required height of inlet baffle (20% of liquid level) | 12” |
| Required height of outlet baffle (40% of liquid level) | 23” |
Septic tank made of precast concrete and fitted with plastic risers for a water-tight seal. It is brand new and never used.
Frequently Asked Questions
- Systems that are more traditional in nature include Concrete Chamber Systems (for anaerobic systems), Mound Septic Systems (an above-ground septic system with a drain field mound), Sand Mound or Sand Filter Septic System, Gravity Septic System (needs a gradual slope), and others.
What is the average cost of a 1250 gallon precast concrete septic tank?
Answer:In terms of septic tank prices, the typical retail price for a 1,250-gallon system is $1250 on the open market. The most important factors that influence the average price of residential septic tanks are the size of the house and the amount of water used per day (or the consistency of the flow of wastewater), which influences the gallons capacity of water flow dependent on the amount of water consumed. A five- or six-bedroom house will require at least a 1,500 gallon tank, if not a bigger tank; in contrast, a two- or three-bedroom house will require a smaller tank and, as a result, cheaper tank pricing.
What affects the average price of septic system installation by professional installers?
The following are some of the factors that might influence the typical price of septic tank installation costs:
- Choosing the right septic tank (for example, precast concrete vs lighter fiberglass tanks)
- A drainage field or absorption field of a certain size (which might have an impact on labor expenses)
- It is necessary to consider the presence of adjacent water sources (which may need the conversion of traditional septic system designs to alternative systems). Norweco Singlair Wastewater Treatment Systems, for example, are aerobic systems that employ aerobic microorganisms to treat waste water.
Soil testing to establish the soil conditions is an additional cost of installation issue to take into consideration. Get in touch with skilled specialists to acquire reliable pricing estimates for your unique tank requirements.
What is the most common septic tank size?
In New Hampshire, the septic tank with a capacity of 1250 gallons is used. Among septic designers, it is the tank that is most frequently specified and used. It is the smallest tank permitted by the New Hampshire Department of Environmental Services, and it may accommodate a dwelling with up to four bedrooms. Extra bedrooms would require an additional 250 gallons per bedroom. As a result, a septic tank of 1500 gallons would be required for a five-bedroom house.
Can you drive over a 1250 gallon size septic tank?
When it comes to driving cars or heavy machinery over a tank, the design rating is what decides whether you can. A.J. Foss makes three different types of septic tank installations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet.
HD is intended for burial depths up to 5 feet. The H-20 rating is for vehicular drive-over traffic up to a maximum burial depth of 6′ in the ground.
Is it ideal for high water table areas?
Answer:Our regular 1,250-gallon septic tank is constructed in two parts, with the seam running along the centre of the tank. Because the seam is located at the very top of the septic tank, our 1250 gallon monolithic septic tank is perfect for use in areas with a high water table or near bodies of water. Because the liquid sits underneath the cover, there is no risk of anything leaking in or out.
How much does a 1250 gallon concrete septic tank weigh?
In response to your question, our 1,250-gallon concrete septic tanks weigh about 11,500 pounds. Based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used by different precast manufacturers, weights might vary somewhat.
How many bedrooms does a 1250 gallon septic tank support?
According to the state of New Hampshire, a 1250 gallon tank can maintain a four-bedroom house. Since the regulations were updated in 2012, it is the smallest tank size that may be specified on new designs for the first time.
- A 1250 gallon septic tank is utilized in systems with up to four bedrooms. The most often encountered tank size in New Hampshire
- The smallest tank we propose for use as a septic tank is the following: It is shipped pre-assembled to make installation as simple as possible
Why are steel tanks or plastic tanks generally not recommended?
Because it is durable, practical, and long-lasting, precast concrete continues to be the most popular material for septic tanks and systems. Plastic tanks and fiberglass tanks, which are made of lighter materials than concrete and appear to be a more cost-effective choice, might be damaged during the installation process. In the case of structural damage to a plastic or fiberglass septic tank, the tank may need to be completely replaced. Septic tanks made of plastic are only recommended for use with alternative sewage systems, such as Norweco Singulair aerobic septic systems, which use oxygen-loving bacteria in conjunction with an aerator to break down solid waste and produce cleaner wastewater effluent that can be discharged to a drain field.
Features/Details*
- A 1250 gallon septic tank is utilized in systems with up to four bedrooms. The most often encountered tank size in New Hampshire
- The smallest tank we propose for use as a septic tank is the following: It is shipped pre-assembled to make installation as simple as possible
* The information displayed is unique to New Hampshire; for information on the standards of other states, please contact us. You might also be interested in these widely used precast concrete septic tanks if you like what you see.
- Precast concrete septic tank with a capacity of 1000 gallons
- Precast concrete septic tank with a capacity of 1250 gallons that is monolithic
- Precast concrete septic tank with a capacity of 1500 gallons that is monolithic
- Precast concrete septic tank with a capacity of 1600 gallons Precast concrete septic tank with a capacity of 1600 gallons that is monolithic in design. Precast concrete septic tank with a capacity of 2000 gallons. Precast concrete septic tank with a capacity of 2000 gallons that is monolithic
- A precast concrete septic tank with a capacity of 1025/275 gallons A precast concrete septic tank with a capacity of 1250/350 gallons. Precast concrete septic tank with a capacity of 1250/350 gallons, monolithic design. A precast concrete septic tank with a capacity of 1250/500 gallons. A precast concrete septic tank with a capacity of 1500/500 gallons that is monolithic in design.
a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.
1250 Gallon Plastic Septic Tank – 2 Compartment
- Pre-plumbed with PVC tees and septic adapters already fitted
Important Note: Tank must be left 1/4 full at all times including installation.
| Part | IAPMO | Ships from |
|---|---|---|
| 41743 | No | MN, OH, OK, UT, NY, WA |
| 41744 | Yes | CA |
Disclaimer: This tank is intended for usage below ground only.
State RequirementsApprovals
Our tanks must comply with a variety of health code standards that are in place across the United States. These codes are governed by the state or county in which you live, depending on your location. Please speak with your local health agency for assistance in choosing the tank you require.
Septic Tank Standards:
- Tank that has been rotationally molded into a single component that is seamless and waterproof
- Neither soil chemicals nor sewage gases have an effect on polyethylene. Tanks made of polyethylene will not rust or corrode. Strict quality standards guarantee that the septic tank is safe for the environment. Connections to the plumbing system according to Schedule 40
- Standard plumbing is something that all area installers or professionals are familiar with. Extensions for the risers are not included. Excellent shipping item that is virtually unbreakable.
Frequently Asked Septic Tank Questions
- If you ask the question, no, you cannot place the plastic septic tank beneath a driveway since it is not authorized, and doing so will invalidate the guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. If you’re looking for bedding or backfill, a sand/gravel mixture (sometimes known as “pea gravel”) is a good option. (Please refer to the installation instructions above.) 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. 4. Can hot water be held in plastic septic tanks? Yes, but only if the water temperature in the tank does not exceed 100 degrees Fahrenheit. The maximum storage temperature for polyethylene storage tanks is 120 degrees Fahrenheit. Containments with a temperature greater than 120 degrees Fahrenheit, even for a short period of time, might degrade the structural integrity of the tank and making it more prone to deformation and collapse
- 5. How do you gain access to underground plastic septic tanks? Each underground plastic septic tank is supplied with manhole access hatches, which allow you to gain access to the tank (1 or 2 depending on tank). Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
- Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save money on shipping. When you are notified that your tank is ready for pickup, Plastic-mart will offer you with a six-digit trip number that will allow you to come in and pick up your tank Monday through Friday from 8:30 a.m. to 2:00 p.m. Plastic-mart and the local producers are grateful for the chance to provide local pick-up as well as the collaboration necessary to ensure that the process is as efficient as possible.
1250 Gallon Two Compartment Plastic Septic Tank
| Part Number: | A-AST-1250-2 |
| Capacity: | 1250 Gallons |
| Dimensions: | 118″L x 58″W x 72″H |
| Ships From: | IA |
| Description:A-AST-1250-2, 1250 Gallon Two Compartment Ace Plastic septic tank available for sale from Plastic-Mart.com. Tank has dimensions of Size58″ (W) x 118″ (L) x 72″ (H) and has been exclusively manufactured to meet wastewater standards. This tank has deep ribbing which enhances its structural integrity. This tank can be installed to a depth of 36″. |
| SKU | A-AST-1250-2 |
| Part Number | A-AST-1250-2 |
| Mfr. Part Number | AST-1250-2 |
| Capacity (Gallons) | 1250 |
| Dimensions | 118″L x 58″W x 72″H |
| Weight (lbs) | 590 |
| Material | Polyethylene |
| Manufacturer | Ace Roto-Mold / Den-Hartog |
| Technical DrawingsGuides | |
|---|---|
| Technical Drawings | View Technical Drawing |
| Shipping From | IA |
| Freight Class | 300 |
| Shipping Length | 120 |
| Shipping Width | 60 |
| Shipping Height | 58 |
| Shipping Weight (lbs) | 590 |
1250 Gallon Septic Tank – IAMPO – 60”D x 51”H x 157”L
- Household wastewater treatment, on-site sewage treatment, residential applications, light commercial hotels, schools, and neighborhood applications, and more are available.
Notes
- All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. It is possible for dimensions on polyethylene tanks to differ by +/-3 percent (typical rotational molding tolerance). It is recommended that venting systems be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage exclusively at atmospheric pressure. The tank is composed of BPA-free and FDA-approved materials. The resin is produced in NSF-certified manufacturing facilities. The tank must be installed and used in accordance with the manufacturer’s instructions for usage and installation in order for the warranty to be valid. According to the tank manufacturer’s guidelines, flexible connectors must be used on all fitting connections.
- BPA-free and FDA-compliant
- High-quality and long-lasting construction
- 3-Year Manufacturer’s Warranty
- Currently in stock and available for purchase
$ 2,370.00 is the amount.
Prices on all items displayed on our website are subject to change as a result of resin price changes that are beyond our control. Please contact our office to obtain verified price or to be placed on our waitlist for future availability (866-969-9404). Shipping and Handling Information
| Ships From | CA |
|---|---|
| Shipping Cost | Call 866-959-7593 for Shipping Quote |
Description
Septic tank with two compartments and a capacity of 1250 gallons. High-quality storage capacities are achieved via the use of state-of-the-art one-piece seamless construction. Line Drawing: 1250 gal Double Compartment Storage Container
| Capacity | 1250 |
|---|---|
| Length | 157″ |
| Width | 60″ |
| Height | 51″ |
| Material | High Density Polyethylene (HDPE) |
| Weight | 350 |
| Inlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Outlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Lid Size/type | (X2) 20″ NexGen D2 Lid and Gasket |
| Specific Gravity | 1.0 (Septic use only) |
| Manufacture | Snyder |
| Certifications | IAPMO |
Additional Information
However, they still provide the excellent structure and safety that you expect from an Ace Roto-Mold septic tank. They are stronger, less difficult to install, and less expensive than traditional concrete septic tanks. Ace Roto-Mold tanks, which are made of high-density polyethylene with ultraviolet inhibitors, have a horizontal flow that is suitable for below-ground installations up to 36 inches in depth. NSF has certified that the 1000, 1250, and 1500 gallon double-compartment septic tanks meet or exceed the requirements of the IAPMO Z1000 and CAN/CSA-B-66 standards.
- A thorough quality control process is used in the design and construction of Ace Roto-Mold septic tanks.
- Ace tanks are the only ones that have a custom-molded gasket in the lid.
- With our innovative lid design, nylon ties hold the lid in place, avoiding the need for metal fasteners that might corrode and fail in the long run.
- By using an exit baffle, you may enable the partially treated liquids to flow out and be treated further.
- Septic tanks are available in one-compartment and two-compartment configurations, and they are designed to hold liquids with specific gravities up to 1.7.
Concrete Septic Tanks Are Probably The Best Option — Build With a Bang
Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.
- Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
- Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
- Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
- ” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.
The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.
Check out these 6 septic systems available for your home.
Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.
Heavy Duty Options
Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.
Installation Requirements
Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.
Lifespan and Durability
The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.
1000 Gallon Concrete Septic Tank
Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.
1250 Gallon Concrete Septic Tank
Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.
In addition, many of these bigger tank sizes are so massive that rebar and wire mesh are required within the walls and between layers to provide additional strength, stability, and durability.
1500 Gallon Concrete Septic Tank
Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.
Inlet Baffles
When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. A bottle neck especially designed to prevent the flow of scum and oils from blocking the input pipe, the inlet baffle is critical to the health and performance of the entire septic system.The inlet baffle is a bottle neck specifically designed to:
- When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank links from the building to the tank. A bottle neck specially designed to prevent the passage of scum and oils from blocking the input pipe, the inlet baffle is critical to the health and performance of the complete septic system.The inlet baffle is specifically designed to:
Outlet Baffles
Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:
- Preserving the septic tank by keeping scum, oils, and solid waste contained inside
- It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.
All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.
Mobility
There must be no solid waste in any of the wastewater discharged from the septic tank. Otherwise, the sediments and oils will pollute the drain field/leach field, resulting in backups and the release of pollutants into the atmosphere. Ensure that your baffles are correctly installed and that they are not in need of repair by consulting with a licensed septic technician before doing anything else! Alternatively, fiberglass and polyethylene (polyethelyene) septic tanks are a viable option, particularly in certain local circumstances.
Cost Effectiveness
If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.
Durability
When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.
Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.
As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.
Float
Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.
If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.
Septic Tanks
Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.
Single Compartment Septic Tanks
A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
600 Gallon Single Septic Tank
Specifications:
- Overall height is 62 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 52 inches
- Height to center line of outflow is 49 inches
- Weight is 5,000 pounds.
1000 Gallon Single Septic Tank
Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 8,000 pounds.
1250 Gallon Single Septic Tank
A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:
- Overall height is 60 inches
- Overall length is 117 inches
- Overall width is 68 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,400 pounds.
1500 Gallon Single Septic Tank
Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
25003500Gallon Single Septic Holding Tanks
Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:
- Overall height is 68 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of intake is 61 inches
- Height to center line of outflow is 61 inches
- Weight is 16,000 pounds.
Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:
- Overall height is 98 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of intake is 91 inches
- Height to center line of exit is 91 inches
- Weight is 20,000 pounds.
Dual Compartment Septic Tanks
Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,000 pounds.
1250 Gallon Dual Septic Tank
Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:
- Overall height is 60 inches
- Overall length is 117 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,700 pounds.
1500 Gallon Dual Septic Tank
Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment.
The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
Triple Compartment Septic Tanks
Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 12,000 pounds.
Chlorine Contact Tanks
Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
Siphon Dose Tank Packages
Specifications:
- It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
1000 Gallon Siphon Tank Package
Specifications:
- It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
1250 Gallon Siphon Tank Package
Specifications:
- It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
1500 Gallon Siphon Tank Package
Inlet height to center line of inlet is 52″, outlet height to center line of outlet is 52″, overall height is 60″, overall length is 117″, overall width is 68″, overall weight is 10,400 lbs, and it includes an indoor alarm and an alarm float.
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of intake is 52 inches
- Height to center line of exit is 52 inches
- Weight is 13,000 pounds
- Includes indoor alarm and alarm float
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank.
In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
Your septic system is normally buried between four inches and four feet underground, depending on the climate.
Dimension List – Arizona Precast Septic Concepts LLC
44 inches in length and 44 inches in width Height-4’4″ Approximately 39 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 37 inches.
ACTUAL SIZE
4’8″ in length, 4’8″ in width Height-4’9.5″ Approximately 45 inches from the bottom of the tank to the bottom of the stub out Outlet approximately 43 inches from the bottom of the tank to the bottom of the stub out
ACTUAL SIZE
Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’2′′ (bottom) and 4’9′′ (top) (top) Height-5’11” Approximately 54 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.
HOLE DIMENSIONS
11’7″ in length, 6’6″ in width
ACTUAL SIZE
Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’8″ (bottom) 4’9″ (top) (top) Height-6’1″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.
HOLE DIMENSIONS
11’5″ in length, 6’3″ in width
ACTUAL SIZE
9’8″ (bottom) and 10’5″ (top) in length (top) Width-6’6″ Height-6’3″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.
HOLE DIMENSIONS
11’3″ in length, 7’10” in width
ACTUAL SIZE
The length is 12’10” and the width is 5’8″. 5’7.5″ in height is the maximum. Inlet – 55 inches, outlet – 52 inches
HOLE DIMENSIONS
14 feet in length 7.5 feet in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-5’11” It measures 55 inches from the bottom of the tank to the bottom of the stub out and 53 inches from that same bottom to the bottom of the stub out. Inlet: 55 inches from the bottom of the tank to the bottom of the stub out
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’6.5″ in length, 5’8″ in width, and 5’7.5″ in height Approximately 55 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.
HOLE DIMENSIONS
Length-16′ Width-7’6″
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-6’4″ From the bottom of the tank to the bottom of the stub out, the inlet is 60 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 58 inches.
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-6’10” From the bottom of the tank to the bottom of the stub out, the inlet is 66 inches. Outlet-64 inches from the bottom of the tank to the bottom of the stub out
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-7’5″ From the bottom of the tank to the bottom of the stub out, the inlet is 73 inches.
from the bottom of the tank to the bottom of the stub out, outlet-71′′
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-9’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 93 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 91 inches.
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-10’7″ Inlet-111′′ measures the distance from the bottom of the tank to the bottom of the stub out. From the bottom of the tank to the bottom of the stub out, the outlet is 109 inches.
HOLE DIMENSIONS
15’10” in length, 8’10” in width
ACTUAL SIZE
14’4″ in length, 6’6″ in width Height-11’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 116 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 114 inches.
HOLE DIMENSIONS
15’10” in length, 8’10” in width 15.5 inches in length, 11 inches in width, and 10.5 inches in height
Other sizesavailable upon request
8′′X8′′ taper to 6.75′′X6.75′′6′ long x 6′′ tall x 8.5′′ wide 8′′X8′′ taper to 6.75′′X6.75′′ 47 inches in length, 5 inches in height, and 9 inches in width
Other sizes made upon request
24 inches inside diameter, 34 inches outside diameter
How much does a 1250 gallon septic tank weigh?
1250 Gallon Plastic Septic Tanks weighing about 11,500 pounds
| Tank / Capacity | Length | Size |
|---|---|---|
| 1250 Gallon Septic Tank | 116″ | 116″ L 55″ W 70″ H |
| 1250 Gallon Septic Tank | 116″ | 116″ L 55″ W 70″ H |
| 1250 Gallon Septic Tank | 116″ | 116″ L 55″ W 70″ H |
| 1250 Gallon Low Profile Septic Tank | 157″ | 157″ L 60″ W 51″ H |
It is also possible to inquire as to how heavy a concrete septic tank is. Polyseptic tanks are around 200 kilos in weight, but their concrete equivalents are approximately 1,500 kilograms in weight. When it comes to weight, how much does a 1500-gallon septic tank weigh? around 12,500 pounds How many bedrooms can a septic tank with a capacity of 1250 gallons accommodate?
| Bedrooms | Home Square Footage | Tank Capacity |
|---|---|---|
| 1 or 2 | Less than 1,500 | 750 |
| 3 | Less than 2,500 | 1,000 |
| 4 | Less than 3,500 | 1,250 |
| 5 | Less than 4,500 | 1,250 |
Septic Tank: Size Matters
Septic systems are not the sort of system that is “one size fits all.” Even if one size tank may be sufficient for one home, this does not imply that it will be sufficient for all households. Talking with a plumbing and septic tank specialist will be your best bet for ensuring that you purchase the proper size tank for your needs. This article will provide you with the fundamental knowledge you need to get started on your home repair and plumbing projects.
Things to consider
The following factors should be taken into consideration when selecting the amount of septic tank that your property requires; for example,
- The square footage of the property in question
- What is the number of rooms in the house
- Who will be residing in the house
- How many people will be living in the house
Septic tanks are typically available in sizes ranging from 750 gallons to 1,250 gallons in capacity. We need some background information before we can get into the meat of the discussion.
What is a Septic Tank?
Septic tanks are self-contained, subterranean chambers or containers that are meant to retain wastewater generated by a home or other building. Generally speaking, septic systems are composed of two major components: the tank and the drain field. As soon as the wastewater exits your home, it will begin to flow into the holding tank. Solid waste will settle to the bottom of the tank, forming a “sludge” layer on the bottom of the tank. Other liquids, such as oil and grease soap residue, will float to the surface, forming the “scum” layer on the surface.
This layer will be made up of wastewater, which is also referred to as effluent in some circles. Eventually, when the tank fills, the effluent drains from the tank and onto the drain field, where it is absorbed by the earth.
Are there Different Types of Septic Tanks?
That’s an excellent question! Yes, different types of materials are used to construct your septic tank by the manufacturer. When it comes to placing the tank, it all comes down to personal style, affordability, and maneuverability. Let us have a look at the many sorts of tanks that are most typically encountered:
Concrete Septic Tanks
Designed to endure several decades, these tanks are one of the most robust solutions available for your household plumbing requirements. However, because they are the heaviest of the materials, their upkeep and installation will almost certainly be more expensive. Another thing to keep in mind is that they are prone to cracking, which can result in wastewater spilling into the surrounding ground and potentially polluting drinking water.
Plastic Septic Tanks
These tanks are more resistant to the natural, biological, and chemical processes that will take place in your tank as a result of their construction. They are also more resistant to cracking than other types of concrete. Because they are made of plastic, they are lightweight, which makes them quite simple to install. Unfortunately, if your earth moves or floods, plastic tanks have a tendency to shift and wander around underground. It is possible that your tank will move or possibly rise out of the ground as a result of this.
Fiberglass Septic Tanks
This sort of tank is more robust than plastic since it is less likely to flex or shift when it is placed in a stable location. They are lightweight and noncorrosive, inside and out and they are also more inexpensive than concrete septic tanks. Unlike plastic or concrete tanks, they are also less prone to suffer structural damage than those materials.
Steel Septic Tanks
These tanks are becoming increasingly rare, but it doesn’t rule out the possibility of seeing one in the future. Steel is the least cheapest material utilized for septic tanks, however this also comes as a cost. Despite the fact that they are intended to endure between 20 and 25 years, they frequently rust before they have reached their entire lifespan. Now that we’ve covered the essential background material, let’s move on to the actual subject at hand.
What Size Septic Tank Do You Need?
- Home with fewer than 1.500 square feet = 750-gallon tank
- Home with fewer than 2,500 square feet = 1,000-gallon tank
- Home with fewer than 3,500 square feet = 1,250-gallon tank
- Home with fewer than 4,500 square feet = 1,250-gallon tank
- And home with fewer than 5,500 square feet = 1,315-gallon tank
- Home with fewer than 2,500 square feet = 1,315-gallon tank
Conclusion
Keep in mind that the information provided above is only a preliminary approximation. The actual size of the tank you want will be determined by a combination of the criteria listed above as well as the regulations of your local jurisdiction. Talking to a professional plumber and septic system installation is your best choice for ensuring that you are not only complying with local standards, but that you are also getting the “most bang for your buck.” Getting the improper size septic tank or having too many people living in a smaller septic tank might result in backups or the need for more regular pumping and maintenance.
We would be delighted to assist you with your new residential plumbing endeavor.
