How Does A Grease Trap Work In A House With Septic Tank? (Solution)

A grease trap works by catching and cooling down warm and hot FOG until they harden and float to the top, thereby preventing them from hardening while inside of the plumbing system. The cooler water, without the FOG, continues its journey down the pipe into the sewer system or septic system.

By allowing the fat, grease and oil (FOG) to cool, a grease trap is able to separate the different layers of wastes with water. FOG are lighter in density and float at the surface of the tanks, and the cooled water – minus the FOG – continues draining to the sewer system. FOG float to the top of the water are then trapped by the grease trap.

Does grease trap connect to septic tank?

Grease traps are used as an additional treatment component and are placed before septic tanks. They are usually required for septic systems that serve a business that produces a large amount of fats, oils and grease (FOG), such as restaurants.

Does sewage go through a grease trap?

The traps reduce the amount of fats, oils, greases, and solids (FOGS) that enter sewers. They comprise boxes within the drain run that flows between the sinks in a kitchen and the sewer system. They only have kitchen waste water flowing through them and do not serve any other drainage system, such as toilets.

Is kitchen drain connected to septic tank?

All drains in the home converge to a single pipe that leads to the septic tank buried outside. When the waste water from your toilet, shower, sinks and washing machine leave your house, it’s combined. When it hits the septic tank, however, it begins to separate.

How do you prevent grease build up in a septic tank?

Using a grease trap additive, such as the liquid or powder form of Bio-Secure Grease Trap Concentrate, can help prevent septic tanks, grease tanks, and sewer lines from clogging. It is relatively easy to use. Just mix the power or liquid additive with warm water and rinse it down the drain.

Where is the grease trap on a septic tank?

So, if grease traps are vital for commercial establishments, what about grease traps for residential septic systems? Placed ahead of the kitchen sink(s) and in front of the septic tank, they could be effective at prolonging the life of households with septic systems that see high levels of FOG.

Does a grease trap need to be vented?

Grease interceptors must have a vented waste, sized in accordance with code requirements for venting traps, to retain a water seal and to prevent siphoning.

What happens to grease trap waste?

After the grease trap is thoroughly cleaned, the grease trap cleaning company will take the waste to a treatment facility. There are a few different ways grease trap waste can be recycled. This solidified waste can be mixed with sawdust, moss and wood chips containing microbes and left to compost.

Where do you put a grease trap?

The most convenient place to install a grease trap is beneath your sink but it can also be installed outside your home. Unless your home has several sinks that are regularly used for cooking, setting it up beneath your sink is recommended.

Do houses have grease traps?

A grease trap is a long, rectangular box that is installed in the sewer line of a commercial kitchen. Most homes don’t actually need one because they don’t deal in the kind of volume that grease traps are built for. This prevents them from making it into the sewer main and clogging it up.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

Can I take a shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

Install an aeration system with diffused air in your septic tank.
Break up any compacted sludge.
Add a bio-activator or microbe blend.

Maintain the aeration system.
Add additional Microbes as required.

What happens to grease in a septic tank?

If you pour grease down a drain, you will end up clogging your drain and nothing will be able to get through. Clogged pipes may lead to your septic system backing up and, in turn, cause serious damage to it. Simply pour all grease in a can to solidify and then it throw away.

How does grease get in septic tank?

The main reason FOG buildup occurs in a septic tank is because you are in the habit of disposing of cooking oil or grease in your home’s plumbing drain system. When the scum layer becomes too thick, it will begin to push down on the liquid waste layer, which is where the exit drains are located.

What Is a Septic Tank Grease Trap?

Garbage disposal is a negative habit that should be avoided at all costs. Fatty, greasy, and oily substances harden when exposed to low temperatures, as we have constantly stated in our prior posts. This is precisely the situation that exists inside the pipes. To put it another way, they adhere to the inside walls of the tubes and build up over time, eventually causing blockages to form. And when blockage occurs, anticipate a slew of additional difficulties to arise, including the existence of bad odors, backups, backflows, and a variety of other problems.

What Is A Septic Tank Grease Trap?

Many people refer to the grease trap as a grease interceptor, which is another name for it. It is a device that is put in the plumbing system and is responsible for preventing grease, fat, and other oily particles from entering the sewage system. Wax, fat, oil, and other forms of debris are hindered because, once they solidify inside the tank, they will form clogs that will obstruct the otherwise smooth process of waste material degradation and filtration that is expected to take place. Plumbing problems will inevitably emerge as a result of this.

Your house will fill with a horrible, filthy odor that will make you want to puke up almost immediately.

Are Grease Traps Required To Be Installed?

It is true that they are necessary not just in commercial buildings, but also in residential constructions. Grease traps are required by building rules and must be installed. These devices ensure that scum and sewage are processed before they are discharged into a septic tank or into a public sewer system, respectively. Waste materials are processed in this manner, and oily compounds are removed from wastewater in this manner.

What Happens After The Grease Trap Installation?

Grease traps are not installed, and then they are left unattended for an extended period of time. These devices also require regular cleaning and maintenance to ensure that they remain in peak operating condition. Cleaning them on a regular basis is one approach to maintain them in good shape. If you’re interested in learning more about how professional plumbers clean grease traps, here’s a step-by-step tutorial to help you out. 1. By using a crowbar or other similar instrument, you will be able to remove the grease trap lid from its mounting bracket.

Following the removal of the grease trap’s lid, the components of the grease trap will be removed as well.
In order to reach grease trap storage, he will first take a wooden dowel or measuring stick and plunge it all the way down to the bottom of a large plastic storage container.
A record of the amount will be kept for future reference.

Following that, the solid wastes will be transported to a leak-proof container and appropriately disposed of.6 Using water and soap, the grease trap will be cleaned and then reassembled.
Call the most reliable Miami Gardens plumber if you need one installed in your home or commercial establishment.

To book a service appointment, please call (305) 240-6731. Do you want to know how to fix a pipe? Now is a good time to watch our video!

Septic Science: The Anatomy of a Grease Trap

Home»Septic Science: The Anatomy of a Grease Trap»What is a Grease Trap? Grease traps, while not present in every septic system, can play an important part in the operation and maintenance of your septic system if they are installed and maintained appropriately. Septic tanks with grease traps are designed to restrict the entrance of Fats, Oils, and Grease (FOG) into the tank and allow these materials to cool as fluids progress through the system and disperse without clogging the pipes. Despite the fact that grease traps are not sophisticated devices, their design, particularly when used in conjunction with a septic system, is ingenious and makes use of certain fundamental physics and biology to separate items and keep the entire system running smoothly.

For all others, see How Do Grease Traps Work?

Let’s get started!

What are grease traps and why are they important?

First and foremost, let us discuss definitions. Grease traps serve as a link between the plumbing pipes in your house or restaurant and the rest of the septic system, collecting grease and other waste. In order to separate greywater (also known as effluent) from floating FOG and sinking silt, they employ strategically located pipelines and tanks. As a result of FOG and sediment buildup in septic drain pipes, sewage backup can occur, and septic systems may fail to perform as intended.

How do underground grease traps work?

Using two subterranean tanks – a primary tank and a secondary tank – grease traps are used to transport greywater (effluent) and wastewater while excluding fats, oils, and grease from the mixture. The primary tank is the container into which sewage from your house or restaurant is discharged. The various elements naturally separate from one another in this basic tank. Heavier debris, such as meals, sinks to the bottom of the tank, while fats and oils float to the surface. The effluent is left in the middle of the process.

Using a crossover pipe, the primary tank is linked to the secondary tank.

A flow diverter may also be included in the primary tank, which acts as a barrier to prevent soils and oils from being pushed into the crossover pipe as a result of momentum.

The two tanks will then continue to fill equally until they reach the exit pipe, where the effluent may be discharged into the septic system.

A little inclination in the outlet pipe will allow the secondary tank to fill past the mouth of the pipe, guaranteeing that whatever fats, oils, and grease did manage to make it into the secondary tank will float above the outlet pipe instead of being drawn through it.

Caring for your grease trap

While the primary function of your grease trap is to prevent fats, oils, and grease from blocking your entire septic system, its secondary function is to break down sediments so that the septic system may continue to function properly. It accomplishes this through the use of naturally existing bacteria, making it critical to maintain the right environment in your grease trap. Pouring dangerous chemicals down your drains will kill microorganisms and inhibit the dissolving of fats, oils, and grease in your grease tap, so be careful not to do so.

Above all, remember to get your grease trap serviced on a regular basis as part of your septic system’s routine maintenance.

Work with the septic masters

In order to do proper sewer system maintenance, you must first get a grasp of how they function. At Streamline Environmental and Drainage, our knowledge and experience with septic systems makes us the best choice for grease trap cleaning, servicing, and repair in restaurants and homes. Even with good maintenance, your grease trap will need to be repaired on a regular basis in order to prevent excessive build-up of grease. In order to get the most out of your septic system, call Streamline EnvironmentalDrainage now!

How to Install a Grease Trap in a Septic System

In order to do proper sewer system maintenance, you must first get a grasp of how they operate. At Streamline Environmental and Drainage, our extensive expertise and experience with septic systems makes us the best choice for grease trap cleaning, servicing, and repair in restaurants and residential kitchens. It will still be necessary to service your grease trap on a regular basis, even if you do routine maintenance. To get the most out of your septic system, call Streamline EnvironmentalDrainage now!

Identify the location of the septic tank or main sewage line in your yard. Ordinarily, the septic tank is placed 6 feet or more away from an outside wall where the sewage line exits the house. Probe the earth using a pointed metal rod to determine the exact location of the tank’s foundation
A piece of dirt should be removed from above the main sewage line, between the exterior wall of the house and the septic tank. The diameter of the soil section should be twice as large as the diameter of the grease trap. Once the dirt above the main line has been cleared, the earth must be removed to make space for the installation of the grease trap. Excavate a bigger hole below the main line to accommodate the grease trap installation. When measuring the depth of the hole, make sure that it is equal to the depth of the grease trap measured from its bottom to the middle of the grease trap’s inlet connection. The diameter of the hole should be the same as the diameter of the grease trap, plus an additional 1 foot on either side to allow for the connection of the tank to the grease trap. To begin, open a bathtub faucet or turn on a shower faucet and let the fresh water flow for around 30 minutes. Fresh water will be used to flush the waste water out of the sewage pipe. When the sewage line is cut and removed, there will be a small amount of fresh water in it, but there will be no surprises. The distance between the inlet and outflow connectors on the grease trap should be determined. The distance between the two measurements represents the quantity of main sewage line pipe that will be removed in order to install the grease trap. Transfer the measurement to the sewage line, and mark the part that will be removed using a permanent marker. The part of sewage line to be removed should be immediately above the opening for the grease trap
Otherwise, the grease trap will not function properly. The main sewage line will be cut, and a portion of pipe will be removed to make room for the installation of the grease trap. A hacksaw or reciprocating saw can be used to cut through a PVC sewage line, depending on the kind of sewer line being installed. The pipe should be removed and placed out of the way after the part has been cut

Attach a connection coupling to each of the two stub ends of the main sewage line by slipping it on there. The connection coupling will link the main sewage line to the grease trap and will act as a leak-proof barrier to prevent leaks. The precise size and kind of connection coupling used on the grease trap will vary depending on the type of connections present on the grease trap. Ideally, the connectors should be obtained from the same source as the grease trap. Installing the grease trap requires that you lower it into the hole. Note the flow direction specified on the grease trap to avoid clogging it up. The grease trap will be marked with painted arrows or other markings to show the direction in which wastewater must flow through the grease trap in order for it to function correctly. It is necessary to watch the correct flow direction. Connect the grease trap’s inlet and outflow connectors to the main sewage line using a hose clamp. In order to ensure that the grease trap is level, add or remove dirt from beneath the grease trap as needed. Using the included clamps and flat-head screwdriver, fix the connection couplings in place once they have been aligned. Turn on the water supply in the home and allow the grease trap to fill with water. Remove the connection couplings and dispose of them properly. As a bonus, it will allow you to check for leaks around the connecting couplings as well. Once the grease trap has been completely filled with water and the leaks have been identified, backfill the hole surrounding the grease trap with soil and then cover the grease trap with soil and sod to finish the installation of the grease trap. The location of the access cover should be noted, or its location should be remembered, for future service when the tank is pumped out.

Why Should You Have Grease Trap Installation

The septic tank or main sewer line should be located in the backyard. Ordinarily, the septic tank is placed 6 feet or more away from an outside wall where the sewage line exits the home. Probe the ground with a pointed metal rod to determine the exact location of the tank’s location. A piece of earth should be removed from above the main sewer line, between the exterior wall of the residence and the septic tank. In order to accommodate the grease trap, the portion of soil should be double its diameter.

Larger holes should be dug below the main line to accommodate the grease trap.

With an extra 1 foot on either side for hookup of the tank, the hole should have a diameter equal to that of the grease trap; nonetheless, the hole should have the same diameter as the grease trap.
Using fresh water, waste water will be flushed from the sewage pipe.
Amount of main sewage line pipe must be removed for the installation of the grease trap is the difference between the two dimensions.

The part of sewage line to be removed should be immediately above the opening for the grease trap; otherwise, the grease trap will not function correctly.
Use a hacksaw or reciprocating saw to cut the sewer line, depending on the kind of sewer line (most likely PVC).
Slip one of the two stub ends of the main sewage line into each of the two connection couplings.

The precise size and kind of connection coupling used on the grease trap will vary depending on the type of connections present on the grease trap.

The grease trap should be installed by dropping it into the hole it was made.

The direction in which wastewater must flow through the grease trap in order for it to function effectively will be indicated by painted arrows or other markings on the grease trap.

The intake and outlet connectors for the grease trap should be connected to the main sewage line.

After you’ve aligned the connection points, slip the connection couplings into position and secure them using the clamps and flat-head screwdriver that included with the kit.

Checking for leaks around the connecting couplings will also be possible as a result of this procedure.

Back-fill the hole surrounding the grease trap with soil and sod to complete the installation. The location of the access cover should be noted, or the location should be remembered, for future servicing when the tank is emptied.

The Danger of Fats, Oils, and Greases

Pouring fats, oils, and greases (FOG) down the drain can result in a plethora of unpleasant and expensive consequences. They have the ability to block drains in your plumbing system, just as they have the ability to clog arteries in our bodies. Using a little quantity of FOG, you may appropriately dispose of it by pouring it into an empty jar or container and putting it in the garbage. Businesses, whether they are located in residential or commercial premises, must dispose of a significant amount of FOG.

The grease trap is used in large-scale facilities such as restaurants and cafeterias to collect grease.

What Is A Grease Trap?

Designed to collect and store FOG so that it does not enter the plumbing system and create difficulties, a grease trap collects and stores FOG in a container. These appliances are available in a range of sizes and are not the most aesthetically pleasing components of a kitchen. As a result, they are frequently put in obscure locations such as behind sinks or outside. From the exterior, they appear to be nothing more than plain metallic canisters. There are compartments filled with water as well as pipelines flowing into and out of the grease trap included within these containers.

How Does A Grease Trap Work?

In order for a grease trap to function, it must capture and chill warm and hot FOG until they harden and float to the top, preventing them from hardening while still in the plumbing system. Afterward, the colder water, which has been stripped of the FOG, continues its journey down the pipe into the sewage or septic systems. Despite the fact that the grease trap functions perfectly on its own, it does require regular maintenance and good care. Scrape off excess food from plates to reduce FOG, recycle your frying oil, and frequently empty your grease trap when it is around a fourth full, according to the manufacturer’s instructions.

The Special Benefits of Grease Traps

As previously stated, grease traps aid in the prevention of clogging by “catching” FOG and chilling it to the point where it floats to the top of the grease trap, preventing blockage. The advantage, on the other hand, is not restricted to your own possessions. Grease traps benefit both the environment and the public by preventing foul-smelling gas (FOG) from entering the sewage system, rivers, and streams. These FOG would pollute water, potentially rendering it unfit for human consumption and posing a threat to animals that live in these areas.

We are always willing to lend a hand.

Grease Traps

Your septic system breaks down garbage, not grease. Advanced Septic Services2018-01-19T18:09:36+00:00Your septic system breaks down trash, not grease. With the ease with which oils and fats now make their way into septic tanks and wastewater treatment systems, they can block pipes and drainfields.

Grease traps, on the other hand, can halt this process in its tracks. First, let’s take a look at why grease is detrimental to waste disposal systems and how grease traps may be used to mitigate this problem.

Why is Grease Bad for Septic Tanks?

Upon arrival at your septic tank after traveling from your residence, all of your waste is divided into three layers in your septic tank:

Bottom Layer: “sludge,” which is sewage waste that has not been broken down
Wastewater and partially digested particles from the sludge layer comprise the middle layer. Top Layer: the “scum” layer, which contains substances such as grease and fats that are lighter in weight than water

In addition to having the exit pipe in the intermediate layer, septic systems also have an exit valve, which allows wastewater and broken down particles to be pushed into the drainfield via. When the scum layer grows too thick, it pushes the middle layer to the bottom of the stack. When your septic tank begins to release grease and oil into the drainfield over treated wastewater, the pipes and field get clogged, reducing the ability of your septic system to properly handle waste. And it’s not just septic tanks that are at risk.

It clogs the pipes of sewer systems and creates obstructions in municipal wastewater treatment facilities, among other things.

How Do Grease Traps Work?

Grease traps are called properly because they catch grease before it enters the pipes that go to the sewer system or septic tank, as is the case with grease traps in general. Their natural waste division system consists of two baffle chambers that naturally partition waste into three levels. Initial separation takes place in the first chamber, which is connected to the second baffle by a conduit that runs from the middle wastewater layer. In the second baffle, there is an exit pipe that permits waste water (without the grease) to be discharged to the sewer or to enter the septic tank.

As the traps fill up, the quantity of money grows.

It will eventually become clogged and cease to function.

Do Residential Septic Systems Need a Grease Trap?

While grease traps are required for commercial systems, particularly in the food service and hospitality industries, they are not required for residential septic systems. The most critical piece of advice for residential properties is to adhere to strict “Do Not Flush” regulations. Using the trash can instead of the garbage disposal and cleaning dishes and pans before placing them in the dishwasher will help you avoid introducing oil into your system. Installing effluent filters will also assist to limit the quantity of oils and fats that enter your drainfield in the future.

Grease Trap Service

After being clogged, your grease trap will emit a foul odor and may become potentially hazardous due to various safety issues linked with improperly maintained traps. This is when Advanced Septic Services comes in. Unlike some surgeries, our professional experts do not just scrape away the top layer of the skin, leaving hardened deposits behind. We clean the whole trap, including any unbroken down waste, scum, and hardened grease that has accumulated over time. Once your grease trap has been professionally cleaned, it will be clear of any accumulations or unwanted aromas.

Grease traps can save your business waste disposal system, whether it is a sewer or a septic system.

However, grease traps, like the rest of your system, require regular maintenance. Make an appointment with Advanced Septic Services at 352.242.6100 now to get a grease trap installed or serviced. a link to the page’s load

How Restaurant Grease Traps Work – Miller Septic Services

A grease trap at a restaurant is a device that is meant to prevent fats, oils, and greases (FOG) from entering the sanitary sewage system. They are particularly significant in restaurants where the wastewater has a high concentration of FOG. Grease traps also prevent other particles from obstructing drains, such as sugar, cream, and other solids, from clogging the drain.

Why Do We Need to Keep Fat, Oil, and Grease Out of the Sewer System?

Fats, oils, and greases (FOG) are collected in a grease trap, which prevents them from entering the wastewater system. Restaurants with FOG-filled wastewater are particularly in need of these filters to keep their equipment running smoothly. Besides preventing grease from blocking drains, grease traps also prevent other particles such as sugar, cream, and other solids from clogging drains.

Components of a Grease Trap

A grease trap is composed of five components: Water enters the grease trap through the inlet pipe, which allows it to reach the grease trap. 2. Flow rate controller – This device reduces the speed at which wastewater flows before it reaches the grease trap. 3. Baffles – metal obstacles that delay the flow of wastewater, allowing it to be separated from fat, oil, and grease more effectively. Fourth, water cools the wastewater, which allows the grease to solidify and separate from the wastewater.

Outlet pipe – this is the conduit via which wastewater is discharged to the sewage system.

Avoiding Restaurant Grease Trap Clogs

Making sure your grease trap doesn’t get blocked is an important part of maintaining its effectiveness. Clogs usually occur as a result of grease building up in your trap over time, stopping water from flowing through it. It is also possible to have a clog form in the input pipe, which will prevent water from entering the grease trap. If this has occurred, you may observe water backing up in sinks or floor drains as a result. Another location where a clog might form is in the outlet pipe, which prevents wastewater from exiting the grease trap completely.

In addition to preventing needless food waste from entering your drains, you should keep your grease traps in good working order by arranging regular cleanings.

About Miller Septic

Miller Septic is a locally owned firm that provides septic cleaning services for both residential and commercial properties. We have more than 30 years of expertise in serving the requirements of residents and companies in Northeast Ohio and surrounding areas. Pumping septic tanks, identifying septic tanks, offering point of sale inspections, cleaning grease traps and catch basins, trucking municipal sludge, providing leach line rejuvenation, and many other services are available. Contact us now for more information!

We are pleased to service the following counties: Holmes County, Wayne County, Tuscarawas County, Coshocton County, Stark County, Ashland County, Carroll County, and others. Contact us right away if you need assistance keeping your restaurant’s grease traps clean.

Great information on Grease Traps!

Often referred to as a grease trap or grease interceptor, a grease trap or grease interceptor is a receptacle that is located between the restaurant drain lines and the sanitary sewer lines. It is responsible for the separation and collection of fats, oils, and greases (FOG) from used water, thereby preventing such materials from entering the municipal sewer system. The grease trap can be installed either inside or outside of the institution, depending on the circumstances. In most cases, major restaurants or school kitchens would have their grease trap/grease interceptor installed outside of the institution, generally in the ground, but smaller facilities can usually accommodate their traps inside the facility.

Why do I have to have a grease trap?

FOG causes all kinds of problems for municipal wastewater systems, which is why local governments require commercial kitchens to have a grease trap installed in order to prevent this. FOG levels in water exiting an enterprise will be regulated by most municipalities to a minimum permissible level. If these bare minimums are not met, penalties may be levied.

How do grease traps work?

Grease traps are designed to delay the flow of water flowing from drains, giving the water and grease time to cool before it is discharged. Grease coagulates and rises to the top of the trap as a result of this chilling process. Other, heavier particles sink to its bottom due to the cooling process. The remainder of the water is free to flow through and into the city sewer system.

How do I maintain my grease trap?

Proper grease trap maintenance is critical in order to ensure that the grease trap is running as effectively as possible. If the amounts of accumulated FOG and solids are not closely monitored, a variety of issues might arise. Drain line obstructions and backups, unpleasant odors, and even worse, an excessive amount of FOG being deposited into the city sewer systems, which may result in large penalties, are all possible problems. Cleaning the grease trap may be accomplished in a variety of methods depending on its size.

Nevertheless, in addition to any statutory pump-outs that may be required, there are alternative techniques of cleaning a grease trap that should be taken into consideration.

This might normally include physically shoveling and vacuuming away the collected FOG and sediments, which would then be disposed of with the regular solid waste stream.
When the FOG collection in the grease trap becomes excessive, most restaurants with bigger grease traps would often hire the services of a professional recycler/hauler to pump-out and maintain the grease trap.
The use of a bacteria additive in the grease trap is one grease trap maintenance routine that any restaurant or kitchen may apply to manage the buildup of FOG and reduce the need for pump-outs, among other benefits.

This can considerably minimize the need for regular pump-outs, as well as the scents released by the grease trap, which can be controlled.
Grease trap bacteria is available in a number of different varieties.
In addition to bacteria blocks, which are slow-dissolving blocks that are suspended from a rope and submerged in the grease trap, another popular style is aeration blocks.

Powder varieties are also available, and they typically take up less shelf space and are less expensive to ship than liquid varieties.

Along with reducing FOG in the trap, bacteria can also be beneficial to drain lines in the kitchen by reducing the buildup of grease in the pipes.

Other important considerations for proper grease trap maintenance include making sure and keeping records of when maintenance procedures, such as pump outs, clean outs, and when bacteria is added, are performed and when they are not.

Encourage your employees to dispose of solids and other waste in the trash whenever possible.

This entails flushing the lines with hot water to remove any grease or other buildup that has accumulated.

Finally, be wary of products that contain only enzymes.

As a result of the eventual coagulation and solidification of this grease in the wastewater treatment system, it only leads to more problems down the line. As a result, many municipalities have passed ordinances prohibiting the use of such products.

Grease Traps vs. Grease Interceptors

Service Pumping and Drain Co. posted a comment on|Leave a comment on Grease traps and grease interceptors serve the same purpose, which is to keep fats, oils, and grease (FOG) from escaping a cooking facility and entering the sewage system. They are byproducts of cooking that are derived from foods that include fats and oils, such as meat and dairy products, and as a result, they are toxic. In the event that they are flushed down the toilet, they might adhere to the interior of sewage pipes, resulting in buildups, blockages, and other major issues over time.

Understanding Each Grease Device

A grease trap is a tiny FOG removal equipment that is designed for use in kitchen applications where the flow of water as well as the volume of oil and grease generated are both relatively minimal. It is often put beneath the sink in a culinary facility’s preparation area.

How does a grease trap work?

Solids settle in a tank when wastewater runs from the sink or drain into it. The FOG hardens and the solids settle in the tank. The fact that FOG is lighter than water causes it to float to the top of the trap, enabling only wastewater to pass through to the sanitary sewer or septic system below.

What is a grease interceptor?

A grease interceptor is a huge equipment for removing FOG from the environment. It is often built beneath large-scale cooking facilities that create a substantial quantity of grease and have higher flow rates and pressures than smaller kitchen facilities.

How does a grease interceptor work?

When it comes to operation, a grease interceptor is similar to a grease trap, but on a much bigger size.

Do I Need a Grease Trap or a Grease Interceptor?

Any facility that discharges wastewater containing fats, oils, or grease into the sewage system is obliged to install a grease trap or grease interceptor on the premises. It is important to consider several criteria while making the decision on the type of greasing system to use in a commercial cooking facility. These considerations include:

Dimensions of a unit. Grease traps are significantly smaller (usually the size of a bread box to a small mini-fridge), whereas grease interceptors are much larger
Grease traps are used in commercial kitchens. Capacity/flow. grease traps are designed to manage flow rates ranging from 10 to 50 gallons per minute, whereas grease interceptors are designed to handle flow rates more than 50. Pressure. Grease traps perform well in low-pressure water situations, but grease interceptors perform better in high-pressure water environments. Installation. When it comes to the kitchen, grease traps are often placed beneath the sink, whereas grease interceptors are placed outdoors and below the concrete foundation. Intervals between maintenance. Depending on their size, grease traps require frequent maintenance every day or once a month, whereas grease interceptors require maintenance every few weeks or months.

Manage Your Grease TrapsInterceptors With Help From the Experts

Cleaning and maintaining a grease trap or grease interceptor on a regular basis is critical when employing this type of equipment. They can also produce clogs, backups, overflows, and/or unpleasant odors that can have a negative impact on the quality and profitability of a food outlet, adjacent buildings, and the surrounding environment if they are not addressed. It is critical to adhere to all applicable state and municipal plumbing codes when doing these activities, as well. According to Massachusetts’ 310 CMR 15.000 Regulation for grease trap maintenance, the following is the procedure:

The Department of Environmental Protection (310 CMR) is a state agency that protects the environment. The owner/operator shall examine grease traps at least once a month, and a licensed septage hauler shall clean the traps once the amount of grease reaches 25 percent of the effective depth of the trap, or at least once every three months, whichever is sooner. The owner/operator is responsible for maintaining all inspection and pumping records. Each city and town in Massachusetts has its own licensing and permitting requirements for septage hauling. Check to see whether your hauler has a valid license in your city or municipality. September transporters must complete a System Pumping Record and submit it to the local Board of Health or Regulatory Agency within fourteen days after pumping.

If you need help cleaning a grease trap or grease interceptor, call to the professionals at Service PumpingDrain for assistance. Depending on the size of the unit, we may provide grease trap maintenance services for units that range from 20 liters to several metric tons. Water jetting, septic system maintenance, catch basin and storm drain cleaning, and 24-hour emergency maintenance are some of the additional services we provide. Because we serve the eastern Massachusetts region, we are conscientious about adhering to all applicable state rules to guarantee that our clients remain in good standing with the law.

They won’t have to worry about anything since we do it correctly the first time. Contact us right away if you would like additional information about grease traps or grease interceptors, as well as how to maintain them.

Septic & Grease Trap Pumping Services – Area Portable Services

Septic systems and grease traps play a vital role in the maintenance of both residential and commercial buildings. Your septic system is in charge of eliminating wastewater from your property and safeguarding you and your family from germs and other harmful substances. This device keeps grease and fats produced by industrial cooking out of the sewage system, where they may otherwise block and damage pipes. Area Portable Services’s grease trap and septic pumping services in Rancho Cordova, CA guarantee that these systems are clean and capable of performing their essential functions.

If you have any questions or would want to arrange a service, please contact us right away.

How a Septic System Works

Unified drainage systems (UDS) are a type of wastewater treatment system that is installed underground and used to disinfect water that comes from the residential plumbing system. Typically, this sort of system is employed in rural locations where there are no municipal sewer systems. A septic tank, as well as a drain field or soil absorption field, are used to treat wastewater in a residential septic system. It successfully removes all waste from the water by utilizing a combination of natural processes and established technologies.

In this system, wastewater is discharged from the home through a single main drainage pipe and collected in an underground septic tank, which keeps waste away from the surface by isolating it inside. In order for the wastewater to be properly treated, it must be held in the tank until the sediments settle to the bottom and oil and grease float to the top. The liquid wastewater travels from the tank to the drain field after the particles and oil have separated. The pretreated wastewater is channeled onto the drain field where it filters through the soil to remove any remaining contaminants. As water passes through the drain field, it is naturally accepted, treated, and dispersed by the soil
Wastewater percolates into the soil, where it is naturally cleansed of dangerous coliform bacteria and other toxins by the soil’s natural processes. The purified water finally finds its way into the groundwater system.

SepticGrease Trap Pumping Services

We provide SepticGrease Trap Pumping Services, as well as Wastewater Management for residential, commercial, and industrial customers in the greater Los Angeles area.

Our Pumping Services

The systems that dispose of your domestic and business garbage are vulnerable, and we at Area Portable Services provide a variety of services to assist safeguard them. We take this duty seriously because we understand how critical it is to the preservation of the public’s health and safety. Our services include the following:

CommercialResidential Septic Pumping Services

Given the high numbers of disease-causing bacteria and viruses found in residential wastewater, as well as the high levels of nitrogen and phosphorus, your septic system has a vital task to complete. We’ll pump out your septic system to make sure it’s in perfect working order, therefore reducing the likelihood of groundwater pollution. DISCOVER MORE

Restaurant Grease Trap Pumping Services

Grease and oil can cause significant damage to a city’s sewage system, reducing the capacity and flow of the pipes. In order to prevent oil from entering the sewage system, municipal authorities compel restaurants to install a grease trap system in their facilities. Our crew can clean your grease trap on a regular basis to ensure that it continues to perform its function properly. DISCOVER MORE

Waste Water

Any water that contains trash that is produced by residential, commercial, and industrial establishments is referred to as wastewater. It is our team’s goal to assist you in managing the flow of your wastewater so that it is appropriately disposed of in order to preserve public health. DISCOVER MORE

The DosDon’ts of Proper Septic Care

While it is critical that you have a professional inspect your septic system, there are certain things you can do to ensure that your septic system is properly maintained.

Observe our straightforward set of dos and don’ts to guarantee that your system continues to function properly:

In addition to having your septic system professionally inspected, there are certain things you can do to ensure that your septic system is properly maintained on your own. If you want to keep your system in good operating condition, follow our easy list of dos and don’ts.

Why Choose Us

Rancho Cordova, CA residents can rely on Area Portable Services to provide septic tank repair and grease trap cleaning when they need it. As a locally owned business, we have the flexibility to serve our clients the way we would like to be treated ourselves, ensuring that you receive great services at a reasonable price in the process. Not to mention that we have many years of expertise in the industry, so you can be confident that we will complete the project to your satisfaction. For septic tank cleaning or grease trap inspection, we’re the company you call on to complete your project successfully.

Contact Us Today

Call Area Portable Services right now if you would like to employ us to accomplish septic or grease trap services at your residence, place of business, or commercial property. When you have questions regarding our services, please don’t hesitate to contact us. We can also assist you in scheduling a cleaning time that works for you. Furthermore, we may give emergency assistance if and when required. Get in touch with us right away!

Septic Tanks and Grease Traps

Grease traps have been used in restaurants and food processing companies for many years to keep fats, oils, and grease (FOG) from entering the septic tank and ultimately the drainfield or sewage system. These devices, when properly serviced and maintained, are extremely successful at lowering the level of FOG in the system. Is it possible for them to be used in home septic systems? If permitted to enter the system unchecked, FOG may cause significant damage to septic systems. In addition to generating obstructions on the walls of pipelines and tanks, it can disturb bacterial life, depriving the septic tank of one of its most important tasks.

There are patents in the United States that date back to at least 1884.
The majority of grease traps are designed in such a way that incoming wastewater is allowed to enter in a “clean zone” within the grease trap.
During the trapping process, wastewater leaves via a baffle with an aperture located at the bottom of the trap.

The suspension of FOG in grease traps will not remain in the trap if they are not maintained or pumped on a regular basis and are allowed to fill up with FOG.
In situations like this, the trap is completely ineffective.
The use of grease traps is required for restaurants and food processing facilities in the majority of parts in the nation.

The levels of FOG are raised in businesses such as those mentioned above.
What about grease traps for home sewage systems, if grease traps are essential for commercial operations but not for domestic septic systems?
They should be installed ahead of the kitchen sink(s) and in front of the septic tank.

This is also a condition that is unlikely to alter in the near future.
Installation costs would also be greater since there would be more assets to acquire and install, which would drive up the overall cost.

So, despite the fact that it appears to be a smart idea, grease traps will very certainly always be considered a business rather than a residential septic system component.

Grease Trap

If you own a home constructed in the early 1970s, your septic system may contain a separate grease trap that needs be cleaned out at least once every two to three years, preferable every three to four years. Commercial grease traps must be maintained on a regular basis, depending on where you are and what sort of restaurant you operate. It can be done once every 30 days or once every quarter. If you own or operate a restaurant, you should be aware of this. We have the knowledge and experience to clean out those grease traps for you and keep them in excellent functioning order.

It is also critical for the environment that both business and residential residues are disposed of in an appropriate manner.
In order to separate the solids from the water, we have installed a cutting-edge dewatering system.
Taking good care of your grease traps at home and at work can help to make North Carolina a more environmentally friendly state.

(252)633-5334

Can homeowners install sink grease traps to prevent build up in septic/sewer lines?

Grease should not be flushed down the toilet. It should be thrown away in the garbage (or use it for further cooking.) Pour off the grease/oil into a container for cooling, possibly refrigeration and re-use, or toss it in the garbage after chilling. Before cleaning pots and pans, use a paper towel to wipe away the majority of the leftover grease and then throw it away. Follow the instructions of practically every public health agency and cooperative extension, and avoid squandering money on “bacteria additives” – substances that cause bacteria to grow.

Alternatively, you might put a huge grease trap (which is similar to another septic tank) outside.

Is It Time to Install a Residential Grease Trap?

If you’re acquainted with the term “grease trap,” it’s most likely because you work in the business sector.

In addition to being commonly associated with restaurants and other enterprises, grease traps may also be quite useful in the home setting. Not only is a grease trap more beneficial if you have a septic system, but it may also be more beneficial to the environment in general.

What is a Grease Trap?

A grease trap, also known as an interceptor, is a tank that collects and filters kitchen wastewater before it is discharged into the septic system. FOG interceptors and separators are designed to intercept and remove FOG (fat, oils, and grease) from wastewater before they reach your septic system, as the name implies. If FOG continues to enter your septic system on a regular basis, you might be in for a serious backup. The question is, where does a household grease trap reside. The most convenient placement would be beneath your sink, but if you have many sinks that are used for cooking, it might alternatively be located outside the house.

Why Invest in a Grease Trap:

If you cook on a regular basis, a grease trap may be required. Grease traps are non-toxic and ecologically safe. To keep your pipes from suffering unnecessarily wear and tear

You Cook Often

If you are the type of person who cooks in the kitchen seven nights a week, a grease trap will save you from having to call us for a clog or blockage, and it may even be a kitchen plumbing need for your home. Despite the fact that you may be vigilant in preserving your pipes against fats and oils, a buildup of these substances might occur over time. By installing a grease trap, you can ensure that your plumbing and sewers are completely clear of FOG! You’ll have more time to cook and less time to worry about what’s going down your drains and what isn’t going down your drain.

Environmentally and Economically Friendly

Rather of having your fats, grease, and oils go into your sewer system, they are intercepted, which helps to prevent contaminants from entering your water supply. Apart from preventing water pollution, you may also utilize your grease interceptor to recycle gray water, which you can then use to irrigate your grass or garden. You’ll save money on water waste! It is possible that by preventing clogged pipes, you will also avoid the need to repair them, which will save you a lot of money over time.

When and Why to get Maintenance

It is advised that you flush any food or grease down the drain with hot water once it has been flushed down the drain. The length of time between cleanings and the longevity of your grease trap will be increased as a result of this practice. Slow drainage, a blockage, or a strong and unappealing stench are the most obvious signals that it’s time to clean your drains and pipes. When it comes time to pump your grease trap, it’s important to be aware of the restrictions in your wastewater district.

When it comes time to clean, you’ll want to make sure it’s done efficiently and effectively by a professional, since it might pose a fire hazard if not done correctly.

For home grease trap services in San Diego or the surrounding regions, call us immediately at (866) 374-0402 to set up an appointment.

5 Main Reasons Why Grease Trap Cleaning is Important

Designed to catch fats, oils, and grease from waste created during food preparation and consumption before they are washed into Michigan’s principal drainage system, grease traps are installed in a variety of locations. Grease trap cleaning is essential in maintaining the sanitation of city sewers and is a necessity for food enterprises such as restaurants and other facilities with a significant food processing area, such as schools and hospitals. The majority of private residences do not have grease traps, and they are not obliged to have one by law since the quantity of waste created by a typical home kitchen is insufficient to cause difficulties in the main sewage system.

The rules may differ significantly from one municipality to the next.
What are these justifications?
1.When cooled, fats, oils, and grease solidify, generating a viscous mass that is rigid enough to prevent fluids from flowing through it.
This might cause significant disruption to their routine operations and perhaps result in their being forced to close, resulting in the loss of precious cash while the blockage is cleared and the kitchen is cleaned.
Salmonellosis, shigellosis, diarrhea, trachoma, and melioidosis are examples of illnesses that can occur.
The development of parasitic illnesses such as threadworm and hookworm is a possibility in the worst case scenario.
3.

The amount of time and resources that would be required to unclog a clogged kitchen sink may be greater than that required for routine cleaning.

4.It is estimated that $25 billion in taxpayer money is spent each year in the United States to repair sewage problems caused by incorrect grease trap maintenance.

In addition, the cleanup of wastewater treatment plant spills costs millions of dollars per year, according to the EPA.

Coopersville’s municipal ordinances require that evidence of service be provided.

Cleaning the grease trap on a regular basis Food restaurants in Twin Lake should adhere to these regulations for a variety of reasons, not simply for the benefit of your restaurant.

Regularly scheduled maintenance by West Michigan Septic Sewer and Drain Service will safeguard your company, your customers, and the entire community. For a grease trap that is clean and functional in West Michigan, contact us today. Please contact us at the following number:

Muskegon: (231) 760-8805
Grand Haven: (616) 201-4929
Whitehall: (231) 981-5227
Holland: (616) 344-5396
Coopersville: (616) 585-0772
Allendale: (616) 384-5017
Twin Lake: (231) 888-1133
Muskegon: (231) 760-8805
Whitehall: (231) 9

For further information, please see grease trap.

Grease Trap Maintenance Explained – All Pro Septic

In 2017, the city of Baltimore was confronted with a “fatberg,” a massive lump of grease and debris that clogged its sewer system and caused sewage to overflow into the streets. It was discovered during an investigation that over 85 percent of certain sewage lines had been blocked with the congealed fat by the city’s engineers. Despite the fact that the fatberg was finally broken up and disposed of, it caused a great deal of damage and chaos while it was being swept away. An eye-opening story like this demonstrates exactly how critical it is to perform frequent grease trap cleaning in Cleveland, Texas.

Continue reading to learn how grease traps operate and how to keep them in good working order.

The separation of fats, oils, and grease (FOGs) from water is accomplished in a variety of ways, including chilling the water or utilizing gravity.

They are then trapped in the grease trap and remain there until it is cleaned out and the FOGs disposed of.

The first and most critical step in keeping your grease trap in good operating order is to do everything you can to prevent grease from entering your drains.

In spite of this, big kitchens and food preparation facilities will allow some FOGs to enter the plumbing system.

Ignoring the grease trap for an extended period of time may result in plumbing problems that will be both expensive and difficult to address in the future.

A reliable provider will assist you in developing a timetable for these periodic checkups and cleanings that is tailored to your organization’s requirements.

The last 20 years have been devoted to ensuring that our clients receive the highest level of service for any and all of their septic system requirements.

We value our consumers and provide them with a free estimate on a regular basis. Call today to talk with a specialist and receive a free quotation; we look forward to supporting you as soon as possible.