- Concrete septic tank covers require replacement when they develop cracks or other damage. These can be purchased online or at a home improvement store near you. Many septic tanks have risers so the lid is visible above ground.
What is the cheapest septic tank?
Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
What is the cost of a plastic septic tank?
With an average cost of $830 to $1,900, plastic septic tanks are a lightweight option compared to a concrete tank. 6
Does Walmart have septic tanks?
Norwesco 41721 1000 Gallon Two Compartment Yellow Septic Tank – Walmart.com.
What are the alternatives to septic tanks?
Alternative Septic Systems
- Raised Bed (Mound) Septic Tank Systems. A raised bed drain field (sometimes called a mound) is just like what it sounds.
- Aerobic Treatment Systems (ATS) Aerobic systems are basically a small scale sewage treatment system.
- Waterless Systems.
Is a plastic septic tank better than concrete?
Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.
How long do plastic septic tanks last?
A septic tank can last between 20 and 40 years. The lifespan depends on the tank’s material. A steel tank lasts 20 years, while a concrete tank lasts 40 years. Plastic tanks can last as long as 30 years.
How big of a septic tank do I need?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
What size septic tank do I need for a tiny house?
Tiny homes typically require a 500 to 1,000-gallon septic tank. Though, it’s not always possible to implement a tank of this size. In some states, for example, the minimum tank size is 1,000 gallons. There may be exceptions to this rule if your home is on wheels.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
What are the 3 types of septic systems?
Types of Septic Systems
- Septic Tank.
- Conventional System.
- Chamber System.
- Drip Distribution System.
- Aerobic Treatment Unit.
- Mound Systems.
- Recirculating Sand Filter System.
- Evapotranspiration System.
How do I clean my septic tank naturally?
You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!
How do you use Instant Power septic treatment?
GENERAL USE: Septic tanks or cesspools of 500 – 1,000 U.S. Gallon capacity: Pour and flush 1/4 Cup (4 Tablespoons) of Instant Power down your toilet once a week. Positive results should be seen within 2 – 4 weeks. To maintain system, use same application weekly.
Plastic Septic Tanks
Ace, Norwesco, and Snyder Industries brand septic tanks are available at Tank Depot at competitive prices. Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. State and municipal health officials from coast to coast have certified Norwesco septic tanks, which are covered by a three-year warranty and have been in use for decades.
NORWESCO BELOW GROUND TANKS – Conversion OptionInformation about NORWESCO BELOW GROUND TANKS Choosing a location for the installation of your Plastic Septic Tank When purchasing a septic tank, it is important to examine the following characteristics.
Installation is a breeze.
Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.
- Construction is made of a single piece of rotationally molded plastic.
- Design for Exceptional Strength The design of the ribs and the location of the ribs give the tank with exceptional structural stability.
- Norwesco’s stringent quality control measures ensure that its septic tanks are safe for the environment.
- 750, 1000, 1250, and 1500 gallon tanks are offered as single compartment or double compartment tanks (2/3 – 1/3) depending on your needs.
- Pre-plumbed / ready to be put into service Norwegian Septic Tanks (750 gallons and greater) are delivered to you fully assembled and ready to be installed.
- Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
- This upgraded design outperforms existing lid designs in terms of strength and durability.
The gasket ensures a watertight seal around the opening of the lid. Accessory options are available. Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.
Plastic Septic Tanks
Plastic-Mart.com is one of the nation’s top suppliers of plastic septic tanks, offering a diverse selection of goods from the most dependable manufacturers in the business. When looking for a sewage holding tank for a residential or business installation, rotomolded plastic septic tanks made of polyethylene resins are an excellent choice. Our rotational molding technology creates better, stronger plastic tanks at a far lower cost than our competitors’ processes. We provide ribbed septic tanks for in-ground usage, as well as a large choice of other septic tank accessories.
Septic tanks are used for a variety of purposes, including holding tanks, waste storage tanks, and more.
We even offer plastic septic tanks that can be sent in as little as 48 hours, such as:
- Plastic Septic Pump Tanks: 200 Gallon Plastic Septic Pump Tank
- 300 Gallon Sphere Pump Tank
- 500 Gallon Low Profile Plastic Septic Tank
- 1000 Gallon 2 Compartment Plastic Septic Tank
- 200 Gallon Low Profile Plastic Septic Pump Tank
California Plastic Septic Tanks For Sale
California Septic Tanks for sale at the lowest possible costs may be found on the internet. Septic tanks made of plastic may be purchased for up to 50% less. These septic tanks have been approved for use in the state of California by the state government.
| Tank / Capacity | Length | Width | Height | Size | Compartments | Part | From | Price |
|---|---|---|---|---|---|---|---|---|
| 200 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time | 47″ | 47″ | 56″ | 47″ L 47″ W 56″ H | 1 | 43745 | MN, MS, OH, OK, UT | $520 |
| 225 Gallon Septic Pump Tank – FL Approved | 47″ | 47″ | 56″ | 47″ L 47″ W 56″ H | 1 | 44788 | FL | $567 |
| 300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time | 48.5″ | 48.5″ | 53″ | 48.5″ L 48.5″ W 53″ H | 1 | 5260000W94202 | AR, CA, MS, NE, WV | $962 |
| 300 Gallon Septic Pump Tank | 54″ | 54″ | 56″ | 54″ L 54″ W 56″ H | 1 | AST-0300-1 | IA | $729 |
| 300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time | 54″ | 54″ | 54″ | 54″ L 54″ W 54″ H | 1 | 41319 | CA, GA, MN, MS, NY, OH, OK, UT, WA | $724 |
| 300 Gallon Septic Pump Tank – FL Approved | 54″ | 54″ | 54″ | 54″ L 54″ W 54″ H | 1 | 44789 | FL | $974 |
| 500 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time | 60″ | 60″ | 63″ | 60″ L 60″ W 63″ H | 1 | 5170000W94203 | AR, CA, MS, WV | $1,223 |
| 500 Gallon Septic Tank | 88″ | 48″ | 43″ | 88″ L 48″ W 43″ H | 1 | ST21L | MS | $0 |
| 500 Gallon Septic Pump Tank | 63″ | 63″ | 74″ | 63″ L 63″ W 74″ H | 1 | AST-0500-1 | IA | $933 |
| 500 Gallon Septic Pump Tank | 64″ | 64″ | 67″ | 64″ L 64″ W 67″ H | 1 | 40785 | CA, MN, NY, OH, OK, UT, WA | $963 |
| 525 Gallon Septic Pump Tank – FL Approved | 64″ | 64″ | 67″ | 64″ L 64″ W 67″ H | 1 | 44830 | FL | $1,134 |
| 1000 Gallon Septic Tank | 102″ | 60″ | 63″ | 102″ L 60″ W 63″ H | 2 | 41721 | CA | $2,020 |
| 1250 Gallon Septic Tank | 116″ | 55″ | 70″ | 116″ L 55″ W 70″ H | 2 | 41744 | CA | $2,283 |
| 1500 Gallon Septic Tank | 135″ | 55″ | 70″ | 135″ L 55″ W 70″ H | 2 | 41761 | CA | $2,787 |
| 2000 Gallon Holding Tank | 126″ | 98″ | 51″ | 126″ L 98″ W 51″ H | 1 | 42559 | WA | $4,169 |
| 2000 Gallon Holding Tank | 126″ | 98″ | 51″ | 126″ L 98″ W 51″ H | 1 | 44593 | MN, OH, OK | $4,169 |
| 2500 Gallon Holding Tank | 159″ | 99″ | 51″ | 159″ L 99″ W 51″ H | 1 | 44079 | CA, MN, OK | $5,178 |
| 2500 Gallon Septic Tank | 159″ | 99″ | 51″ | 159″ L 99″ W 51″ H | 1 | 44079 | CA, MN, OK | $5,178 |
| 2600 Gallon Holding Tank | 155″ | 99″ | 51″ | 155″ L 99″ W 51″ H | 1 | 43770 | MN | $5,450 |
| 2650 Gallon Holding Tank | 155″ | 99″ | 81″ | 155″ L 99″ W 81″ H | 1 | 43771 | MN | $5,723 |
| 3525 Gallon Holding Tank | 211″ | 102″ | 51″ | 211″ L 102″ W 51″ H | 1 | 44390 | CA, MN, TX | $8,438 |
| 3525 Gallon Septic Tank | 211″ | 102″ | 51″ | 211″ L 102″ W 51″ H | 1 | 44390 | CA, MN, TX | $8,438 |
Precast Concrete Septic Tanks vs. Plastic Septic Tanks
When it comes to selecting a septic tank for your property, there are several alternatives to consider. First and foremost, you want to be sure that the tank you choose has the appropriate capacity for your home. After that, you’ll want to be certain that you select a tank that will give years of dependable service for you and your family members. A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass.
The Benefits Of A Precast Septic Tank
- The tanks weigh a great deal. While this may be considered a disadvantage by some, we feel it is one of the most significant advantages of using carbon fiber over other materials. Because of the weight of the precast concrete septic tank, it will never “float” to the surface, which is something that certain lesser weight tanks may accomplish in certain scenarios. Precast concrete septic tanks have a specific gravity of 2.40, which makes them more resistant to buoyant forces than other septic tank materials. HDPE has a specific gravity of 0.97, which is very high. For anchoring structures composed of more buoyant materials, further labor-intensive and time-consuming on-site preparation is required. When selecting a septic tank for your property, it is important to consider the following factors: Precast septic tanks do not rust, which is a major concern. Steel tanks, as well as portions of some plastic and fiberglass tanks, are extremely susceptible to corrosion and failure. Unlike traditional concrete, precast concrete gradually gains strength over time. Other materials, such as steel or high-density polyethylene (HDPE), can degrade and lose their strength. The contents of precast concrete storage tanks may be pumped out without the risk of the tank collapsing. The process of installation is basic and uncomplicated. Shea Concrete offers a staff of tank installers that have completed hundreds of tank installations in the past. We are well-versed in site preparation and are capable of overcoming virtually any installation challenge. In addition, we have vehicles that are fitted with hoists and can even crane a tank over a house when necessary
- Concrete, along with water, is the most widely utilized building material on the planet. This natural substance is non-toxic, ecologically safe, and comprised entirely of natural materials, making it an excellent choice for septic tanks. Concrete is employed in a variety of applications throughout the country and has no negative impact on the quality of groundwater or surface water. During the installation process, plastic tanks are susceptible to damage. In most cases, the installation process is to blame for tank failures
- Precast concrete tanks can be made watertight if they are manufactured in accordance with the National Precast Concrete Association’s “Septic Tank Manufacturing” Best Practices Manual and/or ASTM C 1227, “Standard Specification for Precast Concrete Septic Tanks.” In accordance with these industry standards, which Shea Concrete adheres to, the required processes to be followed during the fabrication of waterproof tanks are specified. It is never acceptable to drive an automobile over a plastic storage tank. This may set restrictions on the location of the tank and leaching area on your land.
Why A Concrete Septic Tank?
Concrete septic tanks are preferable than fiberglass or plastic septic tanks because they are waterproof and heavy duty, making them the preferred storage vessel for on-site sewage storage and treatment over the other materials. In the United States, there are over 40 million septic systems in operation. Septic systems rely on the soil surrounding the septic tank, which is the major component in a septic system, to filter the wastewater discharged from the tank. Concrete septic tanks are also well-known for the following characteristics, in addition to the advantages described above:
- Strength improves with time
- Durability
- Ease of installation
- Low susceptibility to damage during the backfill process
Shea Concrete Septic Tanks
The Shea Concrete Company has been building and installing precast concrete septic tanks for more than 65 years. Shea has a comprehensive variety of septic, cistern, and pump tanks in capacities ranging from 500 to 55,000 gallons, with the most of these sizes being transported by our company trucks, as well. Underground tanks for sewage storage that are safe and long-lasting are manufactured by us at a competitive price. If you are thinking about upgrading or installing a new system, we would be delighted to speak with you.
Septic Tank Installation and Pricing
To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.
In this post, we’ll go over the several types of septic systems that are accessible to homeowners, as well as the procedure and costs associated with installing one.
Who Needs a Septic Tank?
For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.
How to Prepare for Your Septic Tank Installation
Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.
Receive Multiple Estimates
Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.
Test the Soil and Obtain a Permit
For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.
Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test.
Plan for Excavation
Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home. Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected.
The Cost of Installing a Septic Tank
There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.
Percolation Test
A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested.
Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.
Building Permit Application
A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.
Excavation and Installation
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.
Types of Septic Tank Systems
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally constructed. It depends on the size of your home, the type of system you choose, and the material of your septic tank that you want to install. A list of the numerous treatment methods and tanks that are now available, as well as the normal pricing associated with each, is provided below.
Types of Septic Tanks
- Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are damaged. It is possible that concrete tanks will cost up to $2,000 depending on their size. Plastic —While plastic tanks are cost-effective, they are also susceptible to damage. They are around $1,200 in price. Fiberglass —While fiberglass septic tanks are more durable than their plastic counterparts, they are susceptible to shifting or displacement if the water table rises to an excessive level. Depending on the model, these tanks may cost up to $2,000
Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are broken or damaged in some other way. Concrete tanks can cost upwards of $2,000, depending on their size. While plastic tanks are cost-effective and easy to maintain, they are also prone to breaking. Approximately $1,200 is what they are worth. Fiberglass septic tanks are more durable than their plastic counterparts, but they are more susceptible to shifting or displacement if the water table rises to an excessive level.
Using Your Septic Tank
It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.
Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.
Septic Tanks
Despite the fact that city sewage systems can be found practically everywhere and are the most frequent method of disposing of waste, there is an option for those residential and business users who do not have access to a sewage system or do not want to connect to one. With the help of a plastic sewage treatment tank from PlumbersStock, a building may be erected nearly anywhere without the need for a substantial plumbing infrastructure.
Norwesco is one of our favorite brands, and we are pleased to provide it to you at a competitive price. Ontank components and accessories can also be saved for later use.
How Does a Septic Tank Work?
There are several types of septic tanks, the most common of which is the bury tank (at least a1,000 gallons). A little portion of it is buried in the earth near the structure. Located within plastic septic tanks are two independent storage chambers that are separated at the bottom by an opening, but are open to each other at the top. Using a pipe, the tank is linked to the building or residence, and when waste is flushed down the toilet or washed down the drain, it is brought into the tank and disposed of properly.
- As the solids in the first chamber continue to accumulate and settle, they are broken down and transformed into a fluid by the action of gravity.
- Once the fluids have passed through the first chamber and into the second chamber, they are free to exit the tank.
- Leach lines are used in conjunction with plastic septic tanks to transport the waste away from the tank.
- The liquid waste is transported down the leach line, which then leaches the waste into the surrounding soil and groundwater.
- Its capacity is 5.2 cubic feet for the ADS ARC 24-inch model and 8 cubic feet for the ADS ARC 36-inch model.
Tank Maintenance
When it comes to operating a septic tank, it is necessary to do regular maintenance in order for it to continue to function effectively. Consequently, because waste and sediments enter the tank and must be decomposed by anaerobic bacteria, a blockage at the bottom of the tank is frequently experienced. A sewage pump is used to empty the tank regularly, even though this is an issue that affects all plastic septic tanks of the same type. A septic tank pumping is an essential part of maintaining the system’s functionality and efficiency.
Despite the fact that pumping plastic septic tanks is required, there are tank solutions available that are meant to aid in the breakdown of particles.
These products should only be used to aid in the breakdown of solids and should not be used to completely replace regular tank pumping.
Buy Plastic Septic Tanks Wholesale
Make sure you utilize PlumbersStock for all of your septic tank requirements. We have the most competitive pricing on the internet, and we have a large selection of tanks for you to pick from. A variety of maintenance goods, as well as leach line products, are now available, allowing you to purchase everything you need in one convenient location.
PlumbersStock is the place to go if you want water and septic solutions at a reasonable price. Also check out our extensive variety of water storage tanks.
Florida Approved Septic Tanks Archives
| 225 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed | 43551 | 48″L x 48″W x 50″H | 225 | GA, WA | $579 | SPECS | DWG |
| 300 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed | 43552 | 51″L x 51″W x 52″H | 300 | GA | $776 | SPECS | DWG |
| 300 Gallon Norwesco Plastic Septic Pump Tank – Non Plumbed | 41319 | 54″L x 54″W x 54″H | 300 | UT, CA, GA, MN, NY, OH, OK, WA | $764 | SPECS | DWG |
| 500 Gallon Norwesco Legacy Septic Tank – Single Compartment Non Plumbed – 1MH – GT | 41320 | 101″L x 57″W x 47″H | 500 | UT, GA, MN, WA | $1,107 | SPECS | DWG |
| 1000 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT | 44474 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $1,781 | SPECS | DWG |
| 1000 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT | 43517 | 127″L x 60″W x 51″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $1,893 | SPECS | DWG |
| 1000 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH | 41734 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $2,177 | SPECS | DWG |
| 1000 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH | 41735 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $2,300 | SPECS | DWG |
| 1000 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT | 44473 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $1,794 | SPECS | DWG |
| 1000 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT | 42405 | 127″L x 60″W x 51″H | 1000 | UT, GA, MN, NY, OH | $1,771 | SPECS | DWG |
| 1000 Gallon NorwescoSeptic Tank – Single Compartment – 2MH | 41718 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $1,850 | SPECS | DWG |
| 1000 Gallon Norwesco Septic Tank – Double Compartment – 2MH | 41720 | 102″L x 60″W x 63″H | 1000 | UT, GA, MN, NY, OH, OK, WA | $1,973 | SPECS | DWG |
| 1250 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO | 43545 | 157″L x 60″W x 51″H | 1250 | GA | $2,405 | SPECS | DWG |
| 1250 Gallon Plastic Septic Tank – Single Compartment – Low Profile -2MH – GT – SI/SO | 43544 | 157″L x 60″W x 51″H | 1250 | GA | $2,254 | SPECS | DWG |
| 1500 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT | 44480 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $2,728 | SPECS | DWG |
| 1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH | 41771 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $3,163 | SPECS | DWG |
| 1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH – GT | 44470 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $3,128 | SPECS | DWG |
| 1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH – GT | 44469 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $2,947 | SPECS | DWG |
| 1500 Gallon Norwesco Septic Tank – Double Compartment – 2MH | 41760 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $2,940 | SPECS | DWG |
| 1500 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT | 44479 | 135″L x 70″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $2,547 | SPECS | DWG |
| 1500 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO (Side in and side out) | 43547 | 157″L x 69″W x 51″H | 1500 | GA | $2,850 | SPECS | DWG |
| 1500 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT – SI/SO | 43546 | 157″L x 69″W x 51″H | 1500 | GA | $2,668 | SPECS | DWG |
| 1500 Gallon Norwesco Septic Tank – Single Compartment – 2MH | 41758 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $2,755 | SPECS | DWG |
| 1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH | 41772 | 135″L x 55″W x 70″H | 1500 | UT, GA, MN, NY, OH, OK, WA | $3,349 | SPECS | DWG |
Pumps, Risers, Covers & More
As the biggest online distributor of Aerobic Septic System Parts and Septic Tank Parts, Septic Solutions® is the go-to source for all of your septic system needs. The greatest online assortment of septic-related items is available from us, and we have over 1000 different septic-related products in stock. This includes septic tank risers, effluent filters, vent pipe odor filters, and a variety of other goods. On the majority of our goods, we provide fast and free same-day shipping!
FAMILY OWNED COMPANY WITH OVER 100 YEARS OF COMBINED EXPERIENCE!
Founded in 1989 by the James family, our firm is a leader in the industry. All five members of the family are still actively involved in the operation of the company today! We have the necessary expertise and knowledge of the items. Customers have come to rely on Septic Solutions, Inc.® to supply them with the high-quality goods and excellent customer service that they require. In 2003, we launched our online store to service clients throughout the United States and even internationally. Our objective was to provide a comprehensive selection of septic system products for every application at the most competitive pricing feasible.
WE STAND BEHIND THE 1,000+ PRODUCTS THAT WE SELL!
Purchasing your septic system goods from Septic Solutions® offers several advantages, one of which is that we are familiar with the items we sell. It is owned and maintained by a family that has been installing, maintaining, building, designing, and selling septic systems and supplies since 1989. Septic Solutions® is a trademark of Septic Solutions, Inc. We are familiar with the goods we sell since we have been utilizing and maintaining the majority of them for a significant number of years. Since then, we’ve learned which things work and which do not, which products endure for long periods of time and which ones do not, and which items are worth investing in.
Know that all of us at Septic Solutions® value your business and will be here to help you and the goods we provide for many years to come.
A federally registered trademark with registration number 3,215,128 is owned by Septic Solutions, Inc., and is referred to as “SEPTIC SOLUTIONS, INC.” A federally recognized trademark with registration number 3,731,246 is owned by Septic Solutions, Inc.
owns the trademark “ULTRA-AIR,” which is a nationally registered trademark with registration number 4,763,426.
Septic Solutions, Inc. owns the trademark “SEPAERATOR,” which is a nationally registered trademark with registration number 4,763,454. Federal Copyright Registration TXu 2-030-959 owned by Septic Solutions, Inc. provides protection for the content of this website. Septic Solutions, Inc.
Buying a Home With a Septic Tank? What You Need to Know
Published in February of this year A septic tank is one of those property features that might make prospective purchasers feel uneasy. A septic tank is a component of a home’s wastewater system that is often found in homes that are not served by municipal sewers. Instead, according to the Environmental Protection Agency, these stand-alone systems are meant to dispose of and treat the wastewater generated by a residence on their own (EPA). For anyone contemplating purchasing a property with a septic system, here are some often asked questions and answers to consider:
COUNT ON QUALITY COVERAGE.
Protect your assets and enjoy the peace of mind that comes with having Allstate insurance coverage. Request a quote Locate a representative.
How Does a Septic System Work?
A pipe gathers all of the wastewater from the residence and transports it to an underground septic tank that is completely waterproof. As explained by the Environmental Protection Agency, solids settle to the bottom of the pond while floatable items (known as “scum”) float to the top. Both are confined within the tank, which is emptied on a regular basis by a professional pumper. According to the Environmental Protection Agency, the middle layer includes liquid wastewater (also known as “effluent”) that exits the tank into a buried drainfield in the yard, where the wastewater disperses into the soil.
Is the Septic System Related to the Drinking Water System?
No. Many homes that have septic systems also have a private well to provide water. The septic system, on the other hand, is completely separate from the well. Rather of treating wastewater so that it may be consumed, its objective is to safely distribute it in a manner that prevents pollution.
What Differentiates One Septic System from Another?
According to the University of Nebraska-Lincoln, the size of the drainfield and the quality of the soil are the primary factors that distinguish one septic system from another. In addition, the drainfield must be large enough to accommodate the volume of liquid generated by a family. According to the Environmental Protection Agency, do not use a home’s toilet, sink, or disposal as a wastebasket for dental floss, coffee grinds, kitty litter, paint, or chemicals to avoid the chance of blocking the system.
How Often Should You Get Your Septic Tank Emptied?
To remove the sludge and scum from the septic tank, it is necessary to hire a professional to pump it. The frequency is decided by the size of the tank and the degree of activity in the home (how much wastewater is generated). According to the Environmental Protection Agency, most septic tanks should be emptied every three to five years. However, certain systems may require more frequent pumping – perhaps once a year if necessary.
What Are the Signs of a Failing Septic Tank?
Aside from routine pumping, the tank should be examined for leaks or obstructions on a regular basis.
According to the Environmental Protection Agency, signs of a clogged system include foul odors that appear from time to time and fixtures that drain slowly or gurgle.
What About Maintenance Costs?
The size of the tank and drainfield, the accessibility of the tank, and the distance that waste must be taken for disposal all influence the cost of septic system upkeep. According to the Environmental Protection Agency, pumping a tank might cost between $250 and $500.
What Should I Do Before Buying a Home With a Septic System?
Learn about the laws in your state. Some states demand a septic system examination prior to transferring ownership. However, even if your state does not need an inspection, your lender may require one anyhow. As a rule, conventional house inspections do not involve an examination of the septic system. Zillow reports that an inspection may provide a detailed assessment of the system’s integrity, identify whether it is located at an appropriate distance from a well (to minimize contamination), and check the absence of invasive tree roots in the drainfield, which could cause damage to the system.
If you do need to replace your system, the cost might vary significantly.
Owning a property with a septic tank does not have to be a frightening experience.
Related Resources:
NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | CAPACITY | WEIGHT | SPECIFICATIONS | CHAMBERS |
|---|---|---|---|---|---|
| 41820 | $1,900.00 | 1,000 GALLON | 403 lbs | 102″L x 60″W x 63″H | 2 |
| 41821 | $2,700.00 | 1,250 GALLON | 467 lbs | 116″L x 55″W x 70″H | 2 |
| 41822 | $2,475.00 | 1,500 GALLON | 589 lbs | 135″L x 55″W x 70″H | 2 |
| 62397 | $100.00 | Manhole Extension | 15″H x 20″D | ||
| 62396 | $115.00 | Manhole Extension | 24″H x 20″D |
TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | CAPACITY | DIMENSIONS | MANHOLE DIAMETER | CHAMBERS |
|---|---|---|---|---|---|
| 43522 | $950.00 | 500 GALLON | 97″ x 48″ x 42″ | 20″ | 1 |
| 44510 | $1,695.00 | 750 GALLON | 92″ x 60″ x 51″ | 20″ | 2 |
| 44482 | $1,890.00 | 1,000 GALLON | 127″ x 60″ x 51″ | 20″ | 2 |
| 44483 | $1,975.00 | 1,250 GALLON | 157″ x 60″ x 51 “ | 20″ | 2 |
| 44484 | $2,755.00 | 1,500 GALLON | 157″ x 69″ x 51″ | 20″ | 2 |
| 63833 | $125.00 | Manhole Extension | 15″ TALL x 20″ D | ||
| 63834 | $135.00 | Manhole Extension | 24″ TALL x 20″ D |
TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE
| PART NO. | ALPINE PICKUP | SPECIFICATIONS |
|---|---|---|
| 63833 | $80.00 | 15″TALL x 20″D |
| 63834 | $90.00 | 24″TALL x 20″D |
NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | WEIGHT | DIM | CHAMBERS |
|---|---|---|---|---|---|
| AST-0300-1R | $550.00 | 300 Gallon Pump Tank | 134 lbs | 54″ x 56″ | 1 |
| AST-0500-1R | $695.00 | 500 Gallon Pump Tank | 197 lbs | 63″ x 74″ | 1 |
| AST19212 | $110.00 | 35 lbs | Manhole Extension32.5″ x 16″ |
To see the PDF drawing, please choose the appropriate part number from the list below. TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE
| PART NO. | ALPINE PICKUP | WEIGHT | SPECIFICATIONS | CHAMBERS |
|---|---|---|---|---|
| AST-0750-1R | $915.00 | 259 lbs | 60 x 70 x 60 | 1 |
| AST-1000-2P | $1,820.00 | 448 lbs | 60 x 101 x 60 | 2 |
| AST19212 | $110.00 | 35 lbs | Manhole Extension32.5″ x 16″ |
NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING * TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.
| PART NO. | ALPINE PICKUP | WEIGHT | SPECIFICATIONS | DIMENSIONS |
|---|---|---|---|---|
| AST19212 | $65.00 | 35 lbs | 16″ Access Extension – Black | 32.5 x 16 |
NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | COLORS | CAPACITY | WEIGHT | DIM | LID | FITTINGS | CHAMBERS |
|---|---|---|---|---|---|---|---|---|
| LP0300-HT | $635.00 | White | 300 Gallon Holding Tank | 132 | 56 x 95 x 16 | 6″ | 3″ | 1 |
NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | CAPACITY | MANHOLE | SPECS |
|---|---|---|---|---|
| 44079 | $4,970.00 | 2,500 GALLON | 20″ | 159″L x 99″W x 51″H |
| 44390 | $7,075.00 | 3,525 GALLON | 20″ | 211″L x 102″W x 51″H |
| 44876 | $10,425.00 | 5,025 GALLON | 20″ | 211″L x 102″W x 73″H |
| 63833 | $125.00 | Manhole Extension | 20″D x 15″ TALL | |
| 63834 | $135.00 | Manhole Extension | 20″D x 24″ TALL |
TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | SPECIFICATIONS |
|---|---|---|
| 63833 | $80.00 | 15″TALL x 20″D |
| 63834 | $90.00 | 24″TALL x 20″D |
TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | LENGTH | WIDTH | OVERALL HEIGHT | CHAMBERS |
|---|---|---|---|---|---|---|
| GBF0500 | $900.00 | 500 | 72″ Diameter | 55″ | 2 |
TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | LENGTH | WIDTH | OVERALL HEIGHT | INLET A | OUTLET B |
|---|---|---|---|---|---|---|---|
| GBF1250 | $1,500.00 | 1,250 | 137″ | 72″ | 60″ | 54″ | 49″ |
| *1250 Gallon Septic Tank is listed with IAPMO “A” = Measurement from the bottom of the inlet pipe to bottom of tank “B” = Measurement from the bottom of the inlet pipe to the bottom of the tank. Inlet and outlet pipes = 4″ SDR-35 P.V.C. |
TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | LENGTH | WIDTH | OVERALL HEIGHT | CHAMBERS |
TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | LENGTH | WIDTH | OVERALL HEIGHT | CHAMBERS |
|---|---|---|---|---|---|---|
| GBF2000 | $3,235.00 | 2,000 | 144″ | 84″ | 84″ | 2 |
TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.
| PART NO. | ALPINE PICKUP | GALLON CAPACITY | LENGTH | WIDTH | OVERALL HEIGHT | CHAMBERS |
Septic Tank Size: What Size Septic Tank Do You Need?
Septic tanks are used for wastewater disposal and are located directly outside your home. Private wastewater management is becoming increasingly popular in the United States, with more than 30 percent of newly constructed residences incorporating on-site wastewater management. Do you require septic tank installation and are unsure of the amount of septic tank you require? When establishing a septic tank, the most important element to consider is the type and size of septic tank that you will be installing.
A number of factors influence the size of a septic tank, which are discussed in this article.
Basics of Septic Tanks
Your septic system is a self-contained chamber that is designed to retain the wastewater generated by your home. A septic system is comprised of two major components: the soil absorption area or drain, and the holding tank. Septic tanks absorb solid waste when wastewater is discharged into them, resulting in the formation of an asludge layer at the septic tank’s base. A layer of soap residue, grease, and oil forms on the top of the water. The effluent or wastewater is contained within the intermediate layer.
To discover more about how a septic tank works, check out our page that goes into further detail on how a septic tank functions.
The Main Types of Septic Tanks
Before you start thinking about septic tank sizes, it’s important to understand the many types of septic tanks that exist.
- Septic tanks made of fiberglass
- Septic tanks made of plastic
- Septic tanks made of concrete
Septic tanks made of fiberglass; septic tanks made of plastic; septic tanks made of concrete.
Why Septic Tank Sizes is Important
If the capacity of your home’s septic tank is insufficient to satisfy your requirements, it will be unable to handle the volume of wastewater generated by your home. As a result, a wide range of annoying difficulties can arise, including bad smells, floods, and clogs. Nonetheless, the most common consequence of a septic tank that is too small is that the pressure that builds up will cause the water to be released before it has had a chance to be properly cleaned. This suggests that the solid waste in the septic tank will not be sufficiently broken down, and will thus accumulate more quickly, increasing the likelihood of overflows and blockages in the system.
A septic tank that is too large will not function properly if it does not get the required volume of wastewater to operate.
If your septic tank is too large for your home, there will not be enough collected liquid to support the growth of the bacteria that aids in the breakdown of solid waste in the septic tank if the tank is too large.
What Determines Septic Sizes?
Here are some of the elements that influence septic tank sizes; keep them in mind when making your purchase to ensure that you get the most appropriate septic tank for your property.
Consider Your Water Usage
The most accurate and practical method of estimating the appropriate septic tank size for your property is to calculate the quantity of water you use on a regular basis. The size of the septic tank required is determined by the amount of water that can be held in it before being drained into the soil absorption field. In many places of the United States, the smallest capacity of septic tank that may be installed is 1,000 gallons or less. The following are the suggested septic tank sizes for your household, which are based on your household’s entire water use.
- A septic tank with a capacity of 1,900 gallons will handle less than 1,240 gallons per day
- A septic tank with a capacity of 1,500 gallons will handle less than 900 gallons per day. A septic tank with a capacity of 1,200 gallons is required for less than 700 gallons per day
- A septic tank with a capacity of 900 gallons is required for less than 500 gallons per day.
Consider the Size of Your Property
Another factor to consider when determining the most appropriate septic tank size for your home is the square footage of your home. The size of your home will determine the size of the septic tank you will require. For example, a dwelling with less than 1,500 square feet typically requires a tank that holds 750 to 1,000 gallons. On the other side, a larger home of around 2,500 square feet will require a larger tank, one that is more than the 1,000-gallon capacity.
The Number of Bedrooms Your Property Has
An additional issue to consider is the amount of bedrooms in your home, which will influence the size of your septic tank. The size of your septic tank is proportional to the number of bedrooms on your home. The following table lists the appropriate septic tank sizes based on the number of bedrooms.
- In general, a 1-2 bedroom house will require a 500 gallon septic tank
- A 3 bedroom house will demand 1000 gallon septic tank
- A 4 bedroom house will require 1200 gallon septic tank
- And a 5-6 bedroom house would require a 1500 gallon septic tank.
The Number of Occupants
In general, the greater the number of people that live in your home, the larger your septic tank must be. In the case of a two-person household, a modest septic tank will be necessary. If your house has more than five tenants, on the other hand, you will want a larger septic tank in order to handle your wastewater more effectively and hygienically. When determining what size septic tank to purchase, it is important to remember that the size of your septic tank determines the overall effectiveness of your septic system.
As a result, it is critical that you examine septic tank sizes in order to pick the most appropriate alternative for your property in order to avoid these difficulties.
Buying A House With A Septic Tank: Pros And Cons
The size of your septic tank is proportional to the number of people that live in your home. For example, if your house has just two tenants, you will only require a tiny septic tank. If your home has more than five people, on the other hand, you will want a larger septic tank in order to manage your wastewater more effectively and hygienically. Consider the following when determining the amount of septic tank you require: septic tank sizes impact the overall effectiveness of your septic system; It is possible for wastewater to back up your house when the holding capacity of your septic tank is exceeded, producing clogs and floods, and placing you and your family in danger.
To avoid these problems, it is critical that you carefully consider septic tank sizes in order to pick the most appropriate solution for your home’s requirements. Septic system sizes for North Atlanta, GA homes may be determined by contacting us.
