Where To Buy Concrete Septic Tank Near Me? (Best solution)

What is the best way to cover a septic tank?

  • Mulch can be added to the area covering the septic tank and drainfield if snow cover is inconsistent – especially if grass or other vegetation cover is not available. It is always best to limit any traffic on top of the drainfield (vehicular, human or animal).

How much does a 1000 gallon concrete tank cost?

How much does a 1000 gallon concrete septic tank cost? Answer: The average retail cost for a 1000 gallon concrete septic tank is $1062.50.

Which is better cement or plastic septic tank?

Cement Septic tanks are very durable than plastic tanks and, if kept properly, can have extended longevity. With regular draining and proper maintenance, a cement septic tank can last for up to 40 years. Cement septic tanks are resistant to environmental changes such as tree roots or changing soil conditions.

How long do cement septic tanks last?

Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.

What sizes are concrete septic tanks?

What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide.

What is the cheapest septic system?

Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Do concrete septic tanks leak?

The most common problem with concrete septic tanks is that they crack, which causes leaks and problems with soil contamination. If the leaks are only minor, usually they can be repaired and sealed; allowing you to get more life out of your tank.

What will ruin a septic system?

Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.

Does heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

What is the alternative to a septic tank?

Mound systems work well as alternatives to septic tanks when the soil around your home or building is too dense or too shallow or when the water table is too high. Although they are more expensive and require more maintenance than conventional systems, mound systems are a common alternative.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How deep should a septic tank be?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

What are the dimensions of a 500 gallon concrete septic tank?

500 Gallon Siphon Tank Package Overall Length: 79” Overall Width: 48” Height to center line of inlet: 48” Height to center line of outlet: 48”

Septic Tanks

The residential septic tanks we manufacture are made of precast concrete, providing homeowners in New England with a dependable wastewater management system. Shea’s precast concrete septic tanks are sturdy, waterproof, and ecologically friendly, making them an excellent choice for any home waste management system in the world. These precast septic tanks are manufactured to your specifications and are also simple to install in your house or business. For more information about our precast concrete residential septic tanks, please contact Shea Concrete Products at (800) 696-SHEA.

Take a look at the Case Study

Septic Tank 1000 Gallon

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


600 Gallon Single Septic Tank

Specifications:

  • Overall height is 62 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of outflow is 49 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 68 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Single Septic Tank

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

  • Overall height is 68 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 61 inches
  • Height to center line of outflow is 61 inches
  • Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

  • Overall height is 98 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 91 inches
  • Height to center line of exit is 91 inches
  • Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
See also:  How Can You Tell If Your Septic Tank Is Something Wrong? (Question)
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


Triple Compartment Septic Tanks

Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.


Chlorine Contact Tanks

Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File


Siphon Dose Tank Packages

Specifications:

  • It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of intake is 52 inches
  • Height to center line of exit is 52 inches
  • Weight is 13,000 pounds
  • Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

Jensen Precast – Fontana – Septic & Wastewater Systems

Founded in 1968, Jensen Precast has been manufacturing septic tanks. With over 30 years of experience in the septic tank industry, we are the leading producer in Western United States. Septic tanks are the first and most important component of a comprehensive onsite wastewater treatment system. When utilized in conjunction with one of the various treatment and dispersion options available, the septic tank may be considered a comprehensive onsite wastewater treatment system. When you choose a Jensen Precast Septic Tank, you will receive the following benefits: Strength and Structural Integrity – All Jensen Precast septic tanks are engineered by Professional Civil and Structural Engineers to withstand the anticipated loading conditions.

  1. In accordance with the National Precast Concrete Association’s Plant Certification Program, our production operations are subjected to extensive and comprehensive quality control methods during the manufacturing process.
  2. Acceptance by the Uniform Plumbing Code (UPC)- Jensen Precast septic tanks are listed in the Uniform Plumbing Code (UPC), which was issued by the International Association of Plumbing and Mechanical Officials (IAPMO).
  3. Designed and produced in line with the strict and extensive criteria of this national standard, Jensen Precast septic tanks meet or exceed the standards of this standard.
  4. We maintain a large inventory of septic tanks on hand, allowing us to provide quick delivery to any location within our service region.
  5. Grease interceptors from Jensen Precast are available in any size and capacity that is necessary.
  6. The addition of a few simple and cost-effective accessories to your septic tank can allow you to drastically reduce your long-term expenses of ownership.
  7. The installation of an effluent filter in a septic tank is a cost-effective and easy way to increase the life and efficacy of any treatment system while also reducing maintenance costs.
  8. Carbon filters are good at reducing the smells emitted by sewage gas vents.
  9. System for Treatment and Disposal – Jensen Precast is a full-line supplier of a wide range of septic tank treatment systems as well as associated parts, components, and accessories.

Pumps, control panels, sand filters, AdvanTex textile treatment systems, and a variety of other products are available.

1000 Gallon Septic Tanks

Our 1000 gallon septic tank, which is constructed of precast concrete, has a capacity of 1000 gallons of liquid capacity. With this mid-seam design concrete septic tank, you may connect the pipe from the home to either one of the tank’s side or center inlets, depending on your preference. The same choice is accessible at the tank’s outlet, whether it is exiting to the leach field from the tank’s side or exiting from the tank’s central outlet. To connect the pipe entering and exiting the precast construction, Polylok IV closed-end boots are utilized.

ASTM C 1227NPCA is fully compliant with all best-practice criteria.

1000 Gallon Septic Tank DimensionsDetails
Tank dimensions 8’ x 5’8” x 5’2”
Number of bedrooms supported Formerly 2 Now used as a pump station, holding tank, or adding to an existing system
Pre-assembled Yes
Ideal for high water table No, but our 1000 gallon monolithic septic tank is.
Average retail cost $1062.50
Number of covers (lids) 2
Can come in traffic rated (H20) capacity Yes
Concrete strength 5,000 PSI
What are its gallons per vertical inch 21
Weight 8,600 lbs.
Fiber re-enforced Yes
Number of inlets boots (Up to schedule 40pipe can slide through) 3
Height of inlet from bottom of tank to bottom of pipe 51”
Number of outlets boots (Up to schedule 40 pipe can slide through) 3
Height of outlet from bottom of tank to bottom of pipe 48”
Required height of inlet baffle (20% of liquid level) 9”
Required height of outlet baffle (40% of liquid level) 18”

Frequently Asked Questions

In response to your question, the typical retail price for a 1000-gallon concrete septic tank is $1062.55.

What is the most common septic tank size?

Answer:It is a 1000 gallon septic tank across the United States, however it is rarely utilized as a septic tank in New Hampshire. By updating the state standards in 2012, the Department of Subsurface (DES) effectively rendered it no longer applicable as a stated tank size in New Hampshire. They are currently being utilized as a pump station, holding tank, or to increase the capacity of an existing septic system, among other things.

Is it ideal for high water table properties?

A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the septic tank, rather than at the bottom. Mid-seam and monolithic types of 1000 gallon septic tanks are both available from Septic Tanks Direct.

How much does a 1000 gallon concrete septic tank weigh?

Answer:Our 1000 gallon tanks weigh around 8,600 lbs, although the weight of precast tanks varies significantly across manufacturers based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used in the construction.

How deep is a 1000 gallon septic tank?

Septic tanks made of concrete are generally 4′ 8″ deep and hold 1,000 gallons of water.

How many bedrooms does a 1000 gallon septic tank support?

Answer:In New Hampshire, the minimum need used to be many, then two, and currently a 1250 gallon septic tank is the bare essential. In New Hampshire, a 1000-gallon tank is currently often utilized as a holding tank or pump station, or to increase the capacity of an existing septic system.

Can you drive over a 1000 gallon septic tank?

It is determined by the design rating. We make it in three different configurations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. H-20 is designed for drive-over traffic and burial depths up to 6 feet.

See also:  What Is The Largest Septic Tank? (Solution found)

1000 Gallon Septic Tank Dimensions, Features/Details*

  • In two-bedroom installations, a 1000-gallon septic tank is utilized. This structure is frequently used as a pump station. For many years, the standard size in New Hampshire was the same as the standard size in Maine. This is the smallest size that may be used as a grease trap and is suggested for this application. It is shipped pre-assembled to make installation as simple as possible

* Standards for the state of New Hampshire are displayed; click here for information on other states’ specifications. You might also be interested in these widely used precast concrete septic tanks if you like what you see.

  • Septic Tanks: Precast Concrete Septic Tank – 1250 Gallons
  • Precast Concrete Septic Tank – 1250 Gallons Monolithic
  • Precast Concrete Septic Tank – 1500 Gallons Monolithic
  • Precast Concrete Septic Tank – 1600 Gallons
  • Precast Concrete Septic Tank – 1600 Gallons Monolithic
  • Precast Concrete Septic Tank – 2000 Gallons
  • Precast Concrete Septic Tank – 2000 Gallons Monolithic
  • Precast Concrete Septic Tank – 1025

a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.

Together with my brother Matthew, I am now the sole owner of our family-owned precast concrete firm, and we have used all we’ve learned from our father to launch the next generation of our family-owned precast concrete company.

Concrete Septic Tanks

  • 650 gallons 1000-gallon capacity in a single compartment. 1250 gal. in two compartments 1250 gal. in two compartments 1250 gallons in three containers with a siphon 3 Comp. for the Pump
  • 1500 gal. 3 Comp. for the Pump 2 separate compartments
  • 1500 gallons a three-compartment system with a siphon
  • 1500 gal. 3 Comp. for the Pump
  • 1750 gal. 3 Comp. for the Pump 2000 gal. capacity in two compartments. 2500 gal. capacity in 2 compartments. It has two compartments and is made of plastic 1500.

Are you in the market for a new septic system? Take a look at ourSiphon Systems.

  • Pump on a regular basis. Make sure to pump out your septic tank on a regular basis since a neglected system can represent a health danger to you and your family. Pumping your sewage tank once every three to five years is suggested.
  • Ensure that your filter is clean. Inside the tank, there is a filter that has to be cleaned on a yearly basis.
  • Keep an eye on what you flush. To avoid clogging the toilet, just use it for human waste and toilet paper. You should avoid adding any additives, chemicals, paint, food particles, or anything else into your septic system since doing so might cause it to clog and/or cause expensive damage to it. Use of Rid-X or powdered soaps is strictly prohibited.
  • You should be aware of its location. It is critical to understand the location of the system in order to avoid driving anything over it, particularly large machinery or cars, since this might crush or damage the system, resulting in major complications. It is prohibited to construct any structure within ten feet of the system, including a deck or patio.

Septic Tanks in Kentucky (KY) on Thomasnet.com

Supplier of polyethylene septic tanks used in sewage disposal applications in the United States. For example, the capacity ranges from 500 gallon to 1500 gallon; the lengths range from 101 to 143 inches; the widths range from 51 to 55 inches; the heights range from 42-66 inches; and the number of manways ranges from 1 in. to 20 in., among other things. Septic tanks have a variety of characteristics, including soil, chemical and gas resistance, and manhole covers.

Brands +

Banjo, Chem-Tainer, Norwesco, Raven, and Snyder are just a few examples. Precast concrete products for the commercial and residential markets are manufactured by this company. Tanks, walls, columns, basins, stairs, pipelines, curb stops, aggregates, waterers, blankets, tank pads, feed bunks, and limestone are just a few of the products available. Ready-mix concrete and concrete products for the residential and commercial markets are produced by this company. Concrete mixtures, foundations, driveways, sidewalks, footpaths, and septic tanks are some of the materials and products available.

Ready-mixed precast concrete is produced by the company.

Drain Tile, Septic Tanks Made of Concrete Septic tank manufacturer based in the United Kingdom.

Texas Precast

WeDoNotDeliverWeDoNotInstallAerobic SepticsWeDoNotDeliverWeDoNotInstall

1000 – 1500 GPD Jet Aerobic Tank Package

Per day, it is capable of treating up to 1000 gallons of domestic wastewater. Pump tank with a capacity of 1000 gallons is included. Trash tank, Jet Aerator, Control Box, Water Pump, 3 Sprinklers, and Chlorine Tube are all included in the price.

Inlet Bottom 57″H
Outlet Bottom 54″H
Dimensions 120″L x 60″W x 70″H
Price $6,721.00
ONE COMPLETE JET AEROBIC PACKAGE LEFT
  • Riser extension with lid for the aerator
  • 1,000 gallon pump tank with lid
  • Total weight of 16,000-18,000 pounds
  • Jet aerator with control box. Pump for water
  • Three floats, a chlorine tube with eight to eighteen tabs
  • With lid, aerator riser can be used. Risers (at an additional expense if the garbage tank is deep)
  • Three spray heads
  • Three 4″ clamps

Jet Aerator Tank Lids

For either conventional or aerobic exercise. 12,000 pound

Inlet Bottom 51″H
Outlet Bottom 49″H
Dimensions 115″L x 60″W x 60″H
Price $750.00

500 Gallon Round Septic Tank (High/Low Holes)1

The holes in this tank are both high and low in elevation.

Inlet Bottom 51″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

500 Gallon Round Septic Tank (2 Low Holes)2

There are two low holes in this tank.

Inlet Bottom 46″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

300 Gallon Square Septic Tank

Applications include septic tank and pump tank construction.

Inlet Bottom 51″H
Dimensions 115″L x 60″W x 60″H
Price $795.00

Concrete Risers

Dimensions 23″OD x 18″W x 9″H
Dimensions 23″OD x 18″W x 12″H
Dimensions 23″OD x 18″W x 15″H
Price $50.00

Water Well Risers (includes Lid)

Lids for 18″ Poly Risers, which are designed to fit inside 18″ Poly Risers

Flat Tank Lids / Stepping Stones

It is also possible to utilize them as stepping stones.

Sprinkler Head Covers

The diagonal slopes are 3″ on both sides when there are two (2) holes on top.

Round Concrete Lids

Dimensions 64″D x 3″H
Dimensions 68″D x 3″H
Price $195.00

A/C Pads

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.

  • Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
  • Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
  • Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
  • ” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.

The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

See also:  How To Find The Opening Of A Septic Tank? (Best solution)

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

In addition, many of these bigger tank sizes are so massive that rebar and wire mesh are required within the walls and between layers to provide additional strength, stability, and durability.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

  • In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

Precast Septic Tanks – W.C. Newman Co.

Septic Tanks Made of Precast Concrete Construction of Concrete Septic Tanks in the Area of Farmville, Virginia W.C. Newman, located near Farmville, Virginia, provides a variety of precast concrete septic tanks. We have a large quantity of these in stock and ready to ship. Call today to find more about pricing and delivery schedules: 434-392-4241. Available Septic Tanks Made of Precast Concrete Precast septic tanks are a ready-made option for new construction or the replacement of an existing tank in a variety of applications.

We have a wide variety of precast concrete septic system components, including the following:

  • Mid-seam septic tanks with capacities of 1,000, 1,250, and 1,500 gallons
  • 9-hole plastic distribution boxes, as well as 8-hole and 10-hole concrete distribution boxes

Our two heavy-duty boom trucks transport precast septic tanks and crates to their final destination. Drivers are linked via two-way radio tracking and GPS so that we can communicate with you and provide you with updates on your delivery as required. Precast Concrete Products in Other Forms Septic tanks aren’t the only thing we sell here; we also have retaining wall bricks (6x2x2, 4×2, and 2x2x2), as well as a variety of other materials. There is also the option of delivery. Why did you select W.C.

For more than 60 years, W.C.

Convenient delivery to your home or place of business is available from our 16,000-square-foot facility, which provides state-of-the-art concrete supplies, petroleum products, and more.

If you want precast concrete septic tanks, please contact us immediately to arrange for a delivery: 434-392-4241

Leave a Comment

Your email address will not be published. Required fields are marked *