What Level Should My Second Tank Septic Tank Be At? (Perfect answer)

A septic tank should always be “filled” to its normal liquid level, or the bottom of the outlet pipe which carries effluent to the absorption area. This normal liquid level is usually between 8” to 12” from the top of the tank on average (see picture at right).

inspectapedia.com

• The outlet pipe of the second compartment must be two inches lower than the outlet pipe of the tee in the compartment. This is how a properly compartmented tank is constructed. The septic tank will have two liquid levels, and it is desirable to restrict the flow between compartments.

How does a 2 tank septic system work?

Septic tanks work by allowing waste to separate into three layers: solids, effluent and scum (see illustration above). The solids settle to the bottom, where microorganisms decompose them. The middle layer of effluent exits the tank and travels through underground perforated pipes into the drainage field.

Can a septic tank be too low?

Abnormally low sewage levels are any level of wastewater below the outlet pipe, usually indicating that the tank has a leak. Exceptions to low levels include, of course, the period right after the septic tank has been pumped.

Why does my septic system have two tanks?

Unlike a regular septic system, the two tanks on the dual septic system are used to separately store blackwater and greywater. Blackwater entails things such as urine, fecal matter, and flush water. Alternatively, greywater is the much less pathogenic liquid coming from showers, sinks, and washing machines.

Are septic tanks level?

Your tank should be “filled” 8 to 12 inches from the lid of the septic tank. The precise measurement can vary depending on the size and type of septic tank. Your septic tank is at the standard operating level if the water stops just below the outlet pipe.

How do you tell if your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

1. Your Drains Are Taking Forever.
2. Standing Water Over Your Septic Tank.
3. Bad Smells Coming From Your Yard.
4. You Hear Gurgling Water.
5. You Have A Sewage Backup.
6. How often should you empty your septic tank?

Should bath water go into septic tank?

In MOST household septic systems, yes. Probably 98%+ of septic systems receive all of the waste water from the house – tub, shower, sinks, washing machine, dishwasher, etc.

Does poop float in septic tank?

The American diet is often high in fats (which cause feces to float in a septic tank), or high in iron-rich meat (which blackens your stool and causes it to sink like torpedo). Neither of these is good for your septic tank, but you can change that by changing your lifestyle and eating habits.

How do you tell if your drain field is failing?

If so, here are the eight signs of septic system failure.

1. Septic System Backup.
2. Slow Drains.
3. Gurgling Sounds.
4. Pool of Water or Dampness Near Drainfield.
5. Nasty Odors.
6. Unusual, Bright Green Grass Above Drainfield.
7. Blooms of Algae in Nearby Water.
8. High Levels of Coliform in Water Well.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

Do all septic tanks have two compartments?

Most septic tanks have one or two compartments. Two compartment tanks, or two single compartment tanks in series, provide better settling of the solids. Each septic tank has an inspection port over each baffle as well as a manhole access port. The manhole lid needs to be accessed for the tank to be pumped.

Can you connect two septic tanks together?

Use a 4-inch pipe to connect the two septic tanks. Place this pipe into the inlet hole of your new septic tank before you lower it into the ground. After you’ve lowered your new septic tank, insert the other end of the pipe into your old septic tank’s outlet hole.

How do I check my septic tanks sludge level?

To measure the sludge layer:

1. Slowly lower the tube into the septic tank until it touches the bottom of the tank.
2. As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

Why is my septic tank always full?

An overfilled septic tank is often a signal that your drain field is malfunctioning. The drain field is the final fixture in the septic system and serves the purpose of returning treated effluent back into the soil.

Help! My Septic Tank is Full!

Revision History as well as current status on the 15th of August, 2013 Released on March 28, 2017 with a full review.

Plumbing or septic issue?

We get a lot of calls from folks who want us to pump their tank because they claim it is full.usually because they are experiencing troubles. However, there are situations when the plumbing is the source of the problem. What is the best way to determine if an issue can be resolved by your septic maintenance provider or a professional plumber?

Check the cleanout

If the problem is caused by backup in the house, we recommend that you check your cleanout between the house and the tank (if one is present and accessible) to see if there is any backup in the cleanout (which is typically a 4″ PVC pipe with a removable cap). If the problem is caused by backup in the house, we recommend that you check your cleanout between the house and the tank (if one is present and accessible) to see if there is any backup in the cleanout. If there is no backup in the cleanout, we normally recommend that you call a plumber since this implies that the wastewater from the home is not making it to the cleanout.

Afterwards, you may check to see if the liquid level in the septic tank is normal or excessive by removing the lid(s) of the tank and looking inside.

If it is overflowing, you may be dealing with more serious problems (i.e.

Till you have a cleanout, your odds of requiring the services of either a plumber or a septic firm are 50/50, and you won’t know unless one of the two comes out to inspect the situation for you.

Check for smells

A foul odor in the house is typically indicative of a problem with the ventilation or plumbing. Unless you are having backup inside the house or septic system difficulties outside the house, we recommend that you consult with a plumber for assistance.

Signs of a larger problem

After being drained out, a septic tank would normally refill to its regular liquid level within a few days to a week, depending on the size of the tank and the number of people living in the property. As soon as the tank has been refilled to its usual liquid level, effluent can begin to flow back into the absorption area again. The fact that the septic tank is “overfull” may indicate a more serious problem with the entire system (see picture at right). If you are experiencing this problem, draining out your septic tank may provide some temporary respite, but it is unlikely to provide long-term relief.

Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future.

We can assist you with any of your wastewater system needs, and our specialists can also assist you with your septic installation and maintenance requirements: 210.698.2000 (San Antonio) or 830.249.4000 (Austin) (Boerne).

Why Your Septic Tank Looks Full After Pumping – Septic Maxx

Septic tanks must be pumped on a regular basis in order to maintain an effective and healthy system. You’ve probably peered inside your tank after it’s been pumped and wondered why the water level is still so high. When you see a high water level, it might be alarming, especially if you are not familiar with what happens throughout the pumping process. What you need to know about your septic tank is outlined here.

Water is Necessary

Pumping a septic tank removes the solid waste or sludge from the tank’s bottom, allowing it to function properly. Excessive sludge in a septic tank can find its way through the outlet and into the drain field pipes, causing severe flooding in the surrounding area. Not everyone is aware that there is a specified operating level for all septic tanks, which may be found here. 8 to 12 inches from the top of the septic tank’s lid should indicate that the tank is “full.” This might vary based on the size and kind of septic tank used.

When the water level in your tank exceeds the capacity of the pipe, your tank is considered to be overfilled.

You should get your septic system examined and water usage should be restricted until an expert can determine the source of the problem.

What Can Cause Your Septic Tank to Overfill

There might be a variety of factors contributing to your septic tank being overfilled. The presence of an overfilled septic tank is frequently a symptom that your drain field is not operating properly. The drain field is the final fixture in the septic system, and it is responsible for returning treated wastewater to the surrounding soil. When your drain field floods, the water flow becomes obstructed, causing the water level in your septic tank to increase significantly. Plumbing problems and excessive water use are two more prevalent problems.

Excessive water use might cause the septic tank to fill with more contents than it is capable of handling, resulting in a high water level.

Septic Maxx provides high-quality solutions that effectively tackle the problems that afflict septic tanks.

Get in touch with us to talk with a septic specialist right now.

How Can I Tell if My Septic Tank is Full?

The majority of septic system owners are interested in knowing when their tank is full so that they may plan a pumping appointment. The difficulty is that there are many different definitions of what constitutes a “full” septic tank, and only one way to validate that it is full – by opening the tank lids.

Just because a septic system looks to be in good working order does not rule out the possibility that it is overflowing and in need of pumping.

Defining a “full” septic tank

There are three possible scenarios in which your septic tank is termed “full.”

Tank is filled to normal level

It is at this level that the tank’s output line permits liquids to flow into the absorption region of your septic system. When the septic tank is pumped, the water level in the tank drops, but it quickly returns to its regular level as the system is utilized.

Sludge has accumulated

As the tank fills to its regular level and the system continues to be utilized, toilet paper and waste build up and become “stuck” in the tank, causing it to overflow (liquids continue flowing out of the outlet pipe to the absorption area). Some of this paper and solid waste decomposes, but it does not suddenly disappear on its own. The septic tank must be pumped on a regular basis, and the sludge must be eliminated from the system (mostseptic tanks should be pumped every 3-5 years).

Tank is “overfull”

When the water level in a septic tank reaches the very top of the tank, it is deemed to be “overfull.” When the absorption field of a septic system stops taking water, the water collects in the outflow pipe and backs up, overfilling the tank and causing it to overflow.

Preventing a full septic tank

There is a point at which your septic tank is “full,” no matter how long it has been since you last had it emptied and pumped. However, if it has been more than three to five years since you last had it pumped, it is definitely time to do so. Don’t wait until you have a problem before pumping out your tank; by then, it’s typically too late to do something about the situation. By allowing the sludge to accumulate between pumpings, you might cause damage to your drainfield and increase the likelihood of future problems.

Schedule your septic tank pumping

Since 1937, Van Delden Wastewater Systems has been providing septic system installation and maintenance in the Texas Hill Country region. We may be reached at 830-249-4000 (Boerne) or 210.698-2000 (San Antonio) to make a septic pumping appointment. Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future. We can assist you with any of your wastewater system needs, and our specialists can also assist you with your septic installation and maintenance requirements: 210.698.2000 (San Antonio) or 830.249.4000 (Austin) (Boerne).

Inspecting Your Septic Tank

Firstuncover and remove the first manhole cover. Some systems have”risers”that make this job easier by bringing the tank lids up to the ground surface. (We encourage you to have risersinstalled so you won’t need to dig down each time you inspect.)The diagram at left shows the top of the two most common septic tank configurations. The upper figure is found onnewer tanks and the bottom one is usually found on older septic tanks. In most cases, the hole to the left is thefirst compartment, the hole to the right is the second compartment, and the rectangular cover is to the crossoverbaffle. (Some tanks, 25 years or older, may have only one compartment that is round, oval, or square.)This procedure determines the thickness of the scum level(SC).

1. In order to make the scum stick, One of the PVC pipes was cut down to 6 feet from its original length of 10 feet. Glue a 90-degree elbow on one of the ends. Create an elbow out of a 6-inch piece of PVC tubing and glue it in place. End caps should be placed on the open ends. Place a board or a stick over the top of the hole, manhole, or riser to prevent water from leaking in. As shown in Figure 1, lower the scum stick down the manhole of the first compartment of the tank until it rests on the top of the scum layer (see Figure 1below), and mark the scum stick where it passes the reference point (A). Work the stick through the scum layer, starting at the elbow end and working your way down. Continue pushing straight through the scum layer, turning the stick 90 degrees, and pulling up on the stick until you feel the bottom of the scum layer. Note where the scum stick crosses the reference point (B) with a marker. Removing the scum stick and measuring the distance between the two markings will get the following results. This is the measurement of the thickness of the scum layer (SC).

Figure 1: To expand the diagram, click on it. This process determines the thickness of the sludge layer on the bottom of the pond (SL).

1. To create the sludge stick, cut the remaining 10-foot PVC pipe into two parts of 5-foot length. Each stick should have an adaptor attached to it. Insert the coupler into one of the adapters by screwing it in. To build a 10-foot stick, connect the two parts together. Wrap a white cloth or an old towel around the bottom of the stick so that it is tightly wrapped. It should be secured with tape or string. Create a hole in the scum It is not acceptable to smear the sludge stick with scum. Stick carefully through hole in scum layer in first compartment until it rests on top of the liquid layer, then remove stick from compartment. Figure 1 shows how to mark the location of the stick when it passes the aperture of the manhole or riser. Reduce the length of the stick until it reaches the bottom of the tank. Keep the stick in the tank for at least five minutes to allow sludge particles to attach to the towel
2. Otherwise, remove it. The sludge stick should be marked where it crosses the board (Din Figure 1). Work your way carefully away from the stick until you reach the distance between the two markers (CandD). This distance represents the working depth of the tank (WD). On the rag, there should be a visible black stain left by the liquid. Take a measurement of the stain’s height. Sludge layer (SL) depth is measured in millimeters.

Remove the covers from the inlet, outlet, and crossoverbaffles on the ducting system. Examine the baffles to confirm that they are still present and that they are not significantly rusted. Venting holes should be present and unobstructed if the baffles are made of concrete and are molded into the rest of the tank’s structure.

• Ensure that the intake baffle is unobstructed and that the pipe is properly sealed to the tank
• Ensure that the exit baffle is unobstructed and that the liquid level is at the bottom of the pipe, rather than below or above the bottom of the pipe. The line connecting it to the tank must be completely sealed. PLEASE NOTE: In the following photo, looking down an output baffle, the effluent is below the pipe, suggesting a faulty seal. Additionally, the crossover baffle should be clear of blockage.

• This means the input baffle should be clear and the pipe should be completely sealed to the tank
• This also means that the exit baffle should be clear and the liquid level should be at the bottom of the pipe, not below or above it. Pipe connections to tanks must be properly sealed. PLEASE NOTE: In the following photo, looking down an output baffle, the effluent is below the pipe, suggesting a faulty seal
• The crossover baffle should be free of obstructions as well.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

• Inspect and pump your drainfield on a regular basis
• Conserve water
• Dispose of waste properly
• And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order.

Because alternative systems contain mechanical components, it is essential to have a service contract. The frequency with which a septic tank is pumped is influenced by four key factors:

• Inspection of the average residential septic system by a licensed septic service specialist should be performed at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how much usage they receive. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in good working order. As an alternate system with automated components, a service contract is critical. The frequency of septic pumping is influenced by four primary factors:

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

• Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
• Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

• Cooking grease or oil
• Wipes that are not flushable, such as baby wipes or other wet wipes
• Photographic solutions
• Feminine hygiene items Condoms
• Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

• If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
• Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

• The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed.

Here are some things you should do to keep it in good condition:

• It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that exits your septic tank. You should perform the following to keep it in good condition:

How often should my septic tank pumped in California

It is mandatory for homeowners who do not have access to the city’s sewage system to build septic tanks in their backyards. They function by burying wastewater underground, where buoyancy and bulk cause the contents to separate from the surrounding water. Solids settle in the bottom of a conventional wastewater treatment tank (sludge), water settles in the middle, and oils and fats settle on the top of the tank (oil scum) (scum). A large number of bacteria in the tank are actively involved in the decomposition of the tank’s contents.

• The soil filters the water and scum mixture, allowing contaminants to be removed.
• While the majority of homeowners should have their septic tanks cleaned every 3 to 5 years, depending on the size of your septic tank and the size of your family, you may require Septic Tank Cleaning Services as frequently as every 1-3 years in some cases.
• It is vital to clean your tank on a regular basis in order to avoid the different complications that might arise from a full tank.
• Let’s take a look at some of the warning signs that your aseptic tank isn’t being pumped regularly enough.

Drains that are slow to drain or flush

It is a strong signal that your septic tank is beginning to show indications of strain when your drains are not functioning properly. You will most likely notice that your tub, sink, or shower will not drain as quickly as they should, and that your toilet will not flush as thoroughly as it should. If you notice this warning indication in your house, it is important not to disregard it. Take action immediately before this scenario escalates into something significantly more expensive and complex.

Bad Odor

As your septic tank fills with waste, it becomes increasingly difficult to keep the odor-causing gases contained within it. Some of these gases may begin to emanate from your drains or toilets in your house at various times of the year or during specific seasons. The drain field can also be a conduit for the escape of other odor-causing gases, resulting in an unpleasant sulfurous or sewage-like odor in the area around your home. You should contact Lanik Septic Service right away at 951-676-7114 if you begin to notice foul odors in your house.

Unexpectedly Lush and Green Lawn Over the Drain

When a septic system is running properly, it should not be the case that the lawn above a septic drain field seems much better than the remainder of the lawn. If you are able to readily map out your drain field, this suggests that there is an issue with it.

Additional fertilizer is being applied to the grass, as shown by this symbol. This indicates that you should get your septic system assessed right away to avoid establishing an unhealthy and perhaps hazardous condition on your property.

Standing Water

The presence of standing water in various spots across your yard indicates that your septic tank is close to being completely depleted. The most prevalent locations where this occurs are in close proximity to the septic tank and drain field. A reliable indication that your septic system requires pumping and comprehensive inspection is the presence of water pooling in certain areas of your yard or yard equipment It is possible that your septic tank is becoming overcrowded, which might lead to the most catastrophic of all problems: wastewater backing up into your house.

Backup of Sewage

It is undeniably unpleasant to have untreated wastewater backing up into your house, and it is certainly something that no one wants to experience at any point in their lives. However, let’s say you don’t have a regular pumping or inspection schedule for your septic tank and you ignore the warning flags described above. This is a bad situation. If such is the case, you will almost certainly find yourself in this predicament in the future. If this occurs, contact an aseptic service as soon as possible and avoid the contaminated area as much as possible.

Keep a regular inspection and pumping regimen in place in order to prevent dealing with the unpleasant signs outlined above.

In the event that a septic problem emerges, Lanik Septic Service is well-equipped to handle it.

FAQs

Does it smell bad during or after the septic pumping process? When septic pumping is completed, there may be some scents present, but they will dissipate quickly. In most cases, the scents emanate from the outside and disappear after a few hours. Make a phone call to LanikSeptic Service. if there are offensive scents in your home This might indicate a septic system backup. My pipes are draining at a snail’s pace. Is it a problem with the septic tank? Possibly. We’ll start with your septic system if it hasn’t been maintained in more than six months.

What is a draining field, and how does it work?

These pipes feature small apertures on the sides that allow septic greywater to flow out.

It is important to note that the drain field pipes are put over gravel and soil to assist in the natural filtration process. The water that seeps from the leach field lines will join the earth’s hydrologic cycle and become part of it.

Call Today for A Free Consultation on Our Septic Tank Cleaning Services – Available Throughout RiversideSan Diego Counties

Your tank will get overfilled and will require frequent cleaning or pumping to keep it operating properly. While the majority of homeowners have their septic tanks cleaned every 3 to 5 years, the length of time depends on the size of your septic tank and the size of your family; you may require Septic Tank Cleaning Services as frequently as every 1-3 years in some cases. If you are unclear of how full your septic tank is, it is advised that you get it professionally evaluated by septic tank contractors.

If you live in or near San Diego County or Riverside, California, you may benefit from the services of Lanikseptic tank cleaning services.

How Often Should You Pump Your Septic Tank?

You will need to clean or pump out your tank on a regular basis if your tank becomes overflowing. Septic tank cleaning services are typically required every 3 to 5 years for the majority of households; but, depending on the size of your septic tank and the size of your family, you may require Septic Tank Cleaning Services as frequently as every 1-3 years in some cases. In the event that you are confused as to how full your septic tank is, a professional examination by septic tank professionals is highly suggested.

If you live in or near San Diego County or Riverside, California, you can benefit from the services of Lanik Septic Tank Cleaning.

Septic tank pumping should be done at the right interval for your home

The fact is that, while there are some broad suggestions that a septic system should be pumped every 2-5 years, the truth is that you actually only need to pump your system as frequently as your system requires. The amount of sludge and scum present in a septic tank is the most important element in determining how often it should be flushed. When your septic system functions, it does so by taking use of the natural force of gravity to break out the household wastewater into three distinct components:

• Solids (sludge) accumulate at the bottom of the tank
• Grease (scum) accumulates at the top of the tank
• And watery mix (effluent) accumulates in the center of the tank.

When the system is operating normally, the sludge and scum remain in the septic tank while the watery mix drains out into the drain field. The sludge and scum in the septic tank, on the other hand, must be removed from time to time in order to keep things running well. Sludge levels that reach dangerous levels, and/or a scum layer that has developed to a significant thickness, will be driven out into the drain field together with the watery effluent, resulting in a clogging of the drain field.

It is possible that forcing particles and oil down the drain field can clog the subterranean system of perforated pipes, resulting in sluggish drains and even wastewater backups into your home. This can result in the growth of harmful germs in your house, as well as the need for a costly repair.

Most homeowners pumping more often than necessary are overspending!

Essentially, by pumping your septic tank too frequently, there is not enough sludge and scum buildup in the tank to ensure that you earn the optimum return on your investment in the costs of pumping your tank. Paying for the service more frequently than you need to is a waste of money that provides no additional benefits, just like paying for any other periodic maintenance. The fact is that your septic system does require a certain number of beneficial bacteria to function properly. Septic tanks employ anaerobic digestion, which is similar to the digestive system of humans, to naturally break down waste before it is sent on to the next phase of treatment.

Yeast is a type of bacterium that enters your tank each time an organic waste material is flushed down the toilet, and it breaks down the waste material into sludge and effluent.

It is really beneficial to leave your septic tank alone unless the quantities of sludge and scum in your tank exceed specified criteria; otherwise, it is detrimental.

So, how will you knowhow often you should pump your septic tank?

As you can see, the sludge and scum levels in your septic tank are the two most important criteria in determining your plan of maintenance. You should have your septic tank pumped when the sludge level reaches one foot at the bottom of the tank, or when the scum layer at the top of the tank has grown to almost six inches in thickness at the top. Contrary to common assumption, the majority of homes do not require yearly pumping. It is purely dependent on the level of your tank, and not on a fixed time frame.

How to Find Out if Your Septic Tank is Full

To begin, find and gently remove the septic tank lid from its mounting bracket. Use extra caution to ensure that the heavy lid does not crack or shatter, and never leave the tank open while you are not watching it! If a person or a pet falls into the tank, which has 4-5 feet of water beneath, it may be quite deadly. In the following stage, you will examine the scum trap at the very top of the tank to see how thick the scum layer is. You should pump your septic tank when the scum level has reached 6 inches thick, as a general rule of thumb.

• While it is possible to acquire a specialized sludge level measurement stick, it is also possible to create your own at yourself.
• The velcro end will be the one that will be inserted into the aquarium.
• Then, holding the measuring stick straight up, verify the velcro strip for accuracy.
• The septic tank should be pumped after it has accumulated one foot (12 inches) of sludge, as recommended by the manufacturer.

Grant’s Septic Techs, in contrast to many other septic service companies, will actually use photographic documentation to show you exactly where your waste levels are, as well as to assist you in tracking the amount of time it takes for your scum and sludge levels to build up to the appropriate levels.

1. If you do not require septic pumping services, there is no reason to pay for them.
2. For the low price of $127, we will come to your home and do all of the necessary measurements for you.
3. We’ll take actual images of your systems to document their current state and create a personalized proposal for your unique timetable.
4. In fact, if we discover that your septic tank levels require pumping at the time of inspection, we will not charge you for the measurement service.
5. In order to maintain the health of your septic system and get on the bestseptic tank pumping maintenance plan for your house, please contact Grant Septic Technologies at (508) 529-6255 or book a septic tank pumping appointment conveniently online.

Check to see whether your town is included in our Massachusetts service region by entering your address here.

7 Signs Your Septic Tank Is Full & Needs Emptying

Septic tank ownership presents a set of issues that are distinct from other types of property ownership. The consequences of failing to empty your septic tank are slightly more significant than those of neglecting to empty your trash cans. If you’ve had a septic tank for a long amount of time, you may have noticed that there are several tell-tale symptoms that your tank may need to be pumped out. If you’re new to having a septic tank, the symptoms listed below will be the most important things to keep an eye out for in the beginning.

How to tell your septic tank is full and needs emptying

1. Pooling water, slow drains, odors, an unusually healthy lawn, sewer backup, gurgling pipes, and difficulty flushing are all possible problems.

What Does A “Full” Septic Tank Mean?

Before we get into the seven warning signals you should be on the lookout for, it’s crucial to understand what it means to have a “full” tank. There are three alternative ways to define the term “full.” 1.Normal Level- This simply indicates that your septic tank is filled to the maximum capacity for which it was built. This implies that the intake and outtake valves are free of obstructions and allow waste and wastewater to flow into and out of the septic tank without interruption. When a tank is pumped, it is completely empty; nevertheless, when the tank is utilized, it returns to its typical level of “full.” 2.

1. Over time, sludge can accumulate and become entrapped in the system.
2. Waste water will continue to flow out of the building and into the drainage system.
3. An overfilled tank will eventually reach a point where the drainage field will no longer absorb water.
4. The water level will increase to the maximum capacity of the system.

1. POOLING WATER

Water pools accumulating around your septic tank’s drain field are the first item to watch out for while inspecting your system. This is a telltale indicator of a septic tank that has overflowed. It goes without saying that if it hasn’t rained in a while and you’re seeing a lot of water, it’s most likely due to your septic tank failing. Typically, this occurs when your tank is at capacity and there is solid water in the system, which causes it to malfunction. This will then drive the liquid to rise to the surface of the earth.

2. SLOW DRAINS

If you see your sink, bath, or toilet draining slowly, or if you notice any other draining slowly in your house, take note. A blockage in your septic system, or the fact that your system is completely full and has to be emptied, might be the cause of this. Slow drains, in either case, are a warning flag that should not be ignored.

The first line of defense may be to employ a septic-friendly drain cleaner, but if the problem persists, it is advisable to have the septic tank drained completely. In addition, if you see any of the other danger indicators, make a reservation for it to be emptied as soon as you possibly can.

3. ODOURS

If you see your sink, bath, or toilet draining slowly, or if you notice any other draining slowly in your house, take note of this. A blockage in your septic system, or the fact that your system is full and requires emptying, might be the cause of this problem. Slow drains, in any case, are a warning indicator that should not be overlooked. Using a septic-friendly drain cleaner as a first line of defense may be sufficient, but if the problem persists, it is important to get it emptied. If you see any of the other danger signals, schedule an appointment to get it emptied as soon as possible.

4. A REALLY HEALTHY LAWN

A septic tank that is overflowing has a few beneficial effects. It’s possible that the grass atop your sewage tank is the healthiest patch of grass you’ve ever seen. It will outshine the other elements in your yard, allowing you to spot it more easily. If you do happen to discover this, it’s still another red flag to keep an eye out for. If it’s near your septic tank, it’s possible that water is seeping from your system, indicating that it’s either leaking or that it’s full. Whatever the case, it’s time to get it checked out.

5. SEWER BACKUP

The chances of missing this one are little to none, and it’s absolutely something you don’t want to happen. It’s the most evident, and it’s also the most detrimental. Always keep a watch on the lowest drains in your home, since if they begin to back up, you should get your tank emptied as soon as possible.

6: Gurgling Water

The chances of missing this one are little to none, and it’s certainly something you don’t want to occur. It is the most evident, as well as the most harmful. Check the lowest drains in your home for symptoms of clogging; if they exhibit signs of clogging, you should get your tank emptied immediately.

7: Trouble Flushing

If you’re experiencing delayed drainage and you’re seeing that all of your toilets are straining to flush or have a weak flush, it’s possible that your septic tank is full. If this symptom is present in all of the toilets in your home, it indicates that the problem is more widespread than a local blockage.

The Important of Septic Tank EmptyingMaintenance

Maintaining a routine is the most effective way to determine when your tank needs to be emptied, and it is recommended. It’s a straightforward, yet effective, solution. If you can identify correct emptying intervals, it is possible that you will not notice any of the warning indications listed above. The length of time between emptyings will be determined by the size of your septic tank and the number of individuals that use it. According to the Environmental Protection Agency, septic tanks should be drained every 3-5 years at the absolute least.

The following parameters will be taken into consideration when determining the optimum emptying intervals for your tank:

• Typical household characteristics include: size of the septic tank, amount of wastewater generated, and volume of solid waste.

If you’ve recently purchased a property that has a septic tank, be careful to inquire as to whether the previous owners had a maintenance routine. Alternatively, you might simply inquire as to when they last had the tank drained so that you have a general notion. If you do not have access to this information, it is preferable to err on the side of caution and get it emptied as soon as possible. This will leave you in a fresh frame of mind and provide a fresh start for your own personal routine.

It will keep the tank working smoothly, preventing any major problems from developing in the long term.

Otherwise, you may find yourself in the middle of a serious crisis with a major mess on your hands and everywhere else.

Services that are related Septic Tank Cleaning and Emptying Service Continuing Your Education Signs that your septic tank needs to be emptied Is it necessary to empty your septic tank on a regular basis?

What is a septic tank and how does it work? How does one go about their business? How much does it cost to empty a septic tank? ‍

Misconceptions of Septic Systems

You never have to have the septic tank pumped.As the septic system is used, the solids (sludge) accumulate on the bottom of the septic tank(s). When the sludge level increases, sewage has less time to settle properly before leaving the tank through the outlet pipe and a greater percent of suspended solids escape into the absorption area. If sludge accumulates too long, no settling of the solids will occur, and the solids will be able to directly enter the absorption area. These solids will clog the distribution lines and soil and cause serious and expensive problems for the homeowner. To prevent this, the tank must be pumped out on a regular basis.If you use additives you don’t have to have the tank pumped.The claims made by companies that sell additives are that you never have to pump your tank. What the products do is break up the scum and sludge so that there is a greater percent ofsuspended solidsin the tank that then flow down the over flow pipe with the effluent to your absorption area, causing your system to fail.The absorption area is designed to treat water or effluent, not solids.The septic tank is designed to contain and treat the solids and they should remain in the tank. It is much less costly to pump your tank on a routine basis than ultimately having to replace your absorption area.It takes years between having the tank pumped for the septic tank to fill to its capacity.The average usage for a family of four will fill a septic tank to its working capacity of 1000 – 1500 gallons in approximately one week. When the contents (liquids and solids) in the tank reaches the level of the overflow pipe, the effluent flows down the overflow pipe to the absorption area every time water is used in the house.The tank works at this full level until it is emptied when it is pumped again.When the alarm for the pump sounds it means you need to pump your tank.If you have a system designed with a pump to pump the effluent to the absorption area you also have an alarm for the septic system.The alarm sounds when the water level rises in the pump tank and alerts you that there is a malfunction with your pump, float switches, or other component in the pump tank.It does not mean that it is time for a routine pumping of your tank.

3 THINGS TO KNOW ABOUT SEPTIC TANK BAFFLES

By Admin on November 12, 2020 Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your list of accomplishments. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably practicable. Fortunately, there are a number of modest improvements you can do immediately to make your septic system even more ecologically friendly than it already is.

1. Have your septic tank inspected and pumped on a regular basis.
2. A bigger septic tank with only a couple of people living in your house, for example, will not require pumping as frequently as a smaller septic tank or as a septic tank that must manage the waste products of multiple family members will require.
3. When in doubt about how often to pump your septic tank, consult with a professional for advice.
4. In addition to locating and repairing any damage, a professional can ensure that the septic field is in good working order and that your septic tank is functional, large enough to handle your family’s waste, and not causing any unwanted pollution in nearby ground water.
5. Avoid flushing non-biodegradable items down the toilet or down the toilet.
6. Items that are not biodegradable are unable to properly decompose in the septic tank and might cause the system to get clogged.
7. In addition to causing issues in your house, septic system backups can damage ground water in the area surrounding your septic field.

Towels made of paper Products for feminine hygiene Grease or fats are used in cooking.

grinds from a cup of coffee Even if you have a trash disposal, the food scraps that you flush down the drain and bring into your septic system may cause unanticipated harm to your plumbing system.

Food scraps can enhance the amounts of nitrogen and phosphorus in the wastewater, which can disturb the natural bacterial balance of the septic tank, among other things.

Water conservation should be practiced.

Exceedingly large amounts of water use will interfere with the normal flow of wastewater from your home into your septic tank.

Limiting the amount of time you spend in the shower and turning off the faucet while brushing your teeth, as well as purchasing a smaller dishwasher and washing machine that use less water, are all simple strategies to reduce water use in your home.

The following are some basic steps you can take to make your septic system more ecologically friendly: save water, maintain your septic system and tank, and recycle wastewater. To get answers to any of your septic tank-related issues, get in touch with the experts at Upstate Septic Tank, LLC.

WHAT HAPPENS IF YOU DON’T PUMP YOUR SEPTIC TANK?

Written by Admin on November 12th, 2020. Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your priorities. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably feasible. Fortunately, there are a number of minor adjustments you can do immediately to make your septic system even more ecologically friendly, beginning now.

• Make sure your septic tank is inspected and pumped at least once every three years.
• For example, if you have a larger septic tank and only a couple of people living in your house, your septic tank will not require pumping as frequently as a smaller septic tank or a septic tank that must manage the waste products of multiple family members.
• When in doubt about how often to pump your septic tank, consult with a professional for advice.
• This is true regardless of how old or large your tank is.
• Non-biodegradable items should not be flushed down the toilet.
• Objects that are not biodegradable are unable to properly decompose in the septic tank and may cause the system to clog.
• In addition to causing problems in your house, backups have the potential to damage ground water in the vicinity of your septic field.

Products for female hygiene Ghee, lard, or other oils Litter for cats grinds from a coffee maker If you have a trash disposal, the food scraps you dispose of down the drain and into your septic system may cause unanticipated harm to your septic system as well.

Additional to this, the food scraps enhance the amounts of nitrogen and phosphorus in the wastewater, which might disrupt the normal bacteria balance in the septic tank.

It’s more environmentally friendly.

Cutting back on water consumption is one of the most straightforward methods to save money while also protecting the environment and keeping your septic system from being damaged.

Your tank will ultimately fill too rapidly as a result of this, and the layer of waste floating on top of the tank will be pushed into the septic field and, eventually, into the groundwater surrounding your field.

It is possible to make your septic system more ecologically friendly in a variety of ways, ranging from water conservation to regular maintenance of your septic system and tank. To get answers to any of your septic tank-related issues, reach out to the experts at Upstate Septic Tank, LLC.

Septic System Frequently Asked Questions

A septic system, sometimes known as a septic tank, is an underground system that processes the sewage that flows from your house before disposing of the treated, cleaner water. Septic systems are typically seen in residential areas. The treated water is subsequently re-introduced into the environment through filtration. This is critical because untreated sewage may harm nearby streams and water systems, as well as the soil around the perimeter of your septic system. Because your septic system is designed to cleanse and filter sewage, it is critical that it is in proper operating order.

What is a Drainfield?

The drainfield, also known as the leach field, is the area where the water from your septic system is sent after it has been cleansed and filtered. It is necessary to construct a drainfield in order to ensure that water is distributed uniformly back into the soil.

How do I find my septic system?

If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.

This will show you exactly where your septic system is located in your yard, if you have one.

You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.

If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.

How long do septic systems last?

Septic systems are not designed to endure for a specific number of years, thus there is no defined time frame. In the event of adequate maintenance, you may expect your septic system to last several decades before it has to be replaced; but, if your system fails or deteriorates as a result of bad care, its lifespan will be drastically diminished. In order to obtain an accurate estimate of how much longer the life of your septic system may be extended, you must first have it checked thoroughly by an experienced septic system installation or repairer.

However, if you are confident that your tank is in good condition, the date of installation should provide you with an indication of how long it will endure.

What’s the advantage of installing a newer septic system rather than an older system?

Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.

New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.

How much does a new septic system cost?

Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run. Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.

How big is my septic tank?

Septic tank capacity is determined by the amount of water consumed in your property as well as local codes and requirements. Check with your local health agency to find out how big your tank is before installing it.

Why should my septic system be pumped out?

Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run. It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer.

Does my tank need to be dug up to know if it needs to be pumped?

Risers are commonly found in newer septic systems, which allow you to access your tank from the ground level through a lid. It is straightforward for any septic system professional to determine whether or not your yard has risers placed, and whether or not it is necessary to pump it. If, on the other hand, your tank cannot be accessible from the ground level, it will need to be dug up in order to determine whether it has to be drained.

Instead of inspecting your septic system to see whether it needs to be pumped on a regular basis, set a timetable for having your system pumped every 2-3 years.

Why should I have risers and lids installed on my septic system?

As a result, when it comes time to find, pump, or repair your septic system, risers are the best choice since they provide ground-level access to your system. Having a septic system lid will allow you to mow your grass while still being able to find your system with no difficulty. Lids and risers also have the advantage of being accessible all year round, as opposed to earlier septic systems that could only be accessed by digging a trench through your yard. If your septic system has to be pumped or repaired for any reason during the winter months, getting beneath layers of frozen earth can be difficult, if not impossible, and you may be forced to wait until the spring to have access to your tank again.

How often should my septic system be pumped out?

A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three. You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.

Do I need to have the septic tank pumped if I’m selling my house?

Consult with your local health department to learn about the restrictions that apply to your region of residence. Generally speaking, as long as your septic system has been pumped on a regular basis by a licensed septic system company and recently enough for the new homeowners to be able to live there for a year or two without having to pump the septic system, you should not be required to have it pumped again in the near future.

How do I find someone to pump my septic system?

It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.

How much does it cost to have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision.

You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.

What happens if I don’t have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, therefore you should always contact several pumpers before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system before it should have been replaced in the first place!

I just had my septic system pumped. Why is it full already?

Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.

What do you look for when inspecting my septic system?

When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.

The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?

Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.

What happens when my septic system fails?

Symptoms of a failing septic system may include minor issues such as drain breaks or pipes that have been stopped, which can be caused by tree roots intersecting with the system. Septic system failure, on the other hand, might indicate that your septic tank has degraded to the point that it cannot be repaired and must be replaced. A blocked drainfield will hopefully not become your problem because it is the most expensive component of your system to replace; nevertheless, if it does, you must act quickly to make the necessary repairs or else your waste will continue to back up, perhaps causing damage to your property.

A blocked drainfield is likely the reason of your sluggish draining pipes, damp yard above your tank or drainfield, sewage stench coming from your yard, or tainted well water. You’ll need to replace the drainfield as soon as possible to avoid further pollution of drinking water sources.

How do I prevent my septic system from failing? How can I properly maintain my septic system?

Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.

What shouldn’t I flush down the toilet?

As a general rule, only human waste and toilet paper should be flushed. There are several reasons why flushing medicine down the toilet is not a good idea. First, medication might kill some of the bacteria in your septic tank, which is necessary to break down solid waste. Second, drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.

What shouldn’t I pour down the drain?

Grease from the kitchen, motor oil, anti-freeze, gasoline, paint, and food should not be flushed down the toilet or drain. You should avoid flushing anything down your drain other than soap and water, and you should especially avoid flushing any form of chemical down your drain that should not be recycled back into the environment, such as fertilizer.

Is using a garbage disposal bad for my septic system?

Using a trash disposal will result in the requirement to pump your septic system more frequently than you would otherwise need to do if you avoided flushing food particles down your drains. Too much food collection in your tank might cause your drainfield to clog since the microorganisms in your tank are not capable to digesting it. When using a trash disposal, check with your septic system company to find out how frequently the disposal should be serviced.

Should I add bacteria to my septic system?

Aside from being completely useless, introducing bacteria to your septic tank is also highly discouraged. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the need of bacteria supplements or other methods. If, on the other hand, multiple members of your home are using pharmaceuticals, they will enter your septic system through human waste and kill some of the beneficial bacteria in your tank, causing it to malfunction. Please contact the firm who installed your septic system to see whether or not you should be worried about the amount of bacteria-killing compounds entering the system.

There’s a strong sewer odor outside of my house. Could this be my septic tank?

Strong sewage stench coming from your yard might be coming from your septic system, but it could also be coming from someplace else completely. Identifying the source of the smell is important. Check for propane or gas leaks in your home before concluding that your septic system is at fault; however, if your gas or propane lines are not leaking, determine how long it has been since you had your tank pumped, and whether there is any sewage waste in your yard or other signs of septic system failure before making your final decision.

Can my septic system contaminate nearby water?

It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely.

In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.

My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?

The drainage of your gutters into your yard above your septic system, and particularly into your drainfield, can be hazardous to your septic system. All water should be diverted away from your septic system in order to minimize flooding and damage to your septic system’s tank or drain field.