In general, the bigger your home, the bigger the septic tank that you’ll need. For instance, a two bedroom home with less than 1,500 square feet will only need a 750-gallon septic tank. Whereas a three bedroom home with 2,500 square feet will need a 1,000-gallon septic tank.
- A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall. Your septic tank may be a different size however. Best practice is to find and measure your septic tank for accurate calculations. Tanks are typically buried 4 inches to 4 feet deep depending on local site conditions, shape, slope, and other factors.
How big should my septic tank be?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
Does septic tank size matter?
sizing of the septic tank properly is important because it ensures there is enough liquid in the tank to allow for settling of suspended solids as well as breaking down of organic waste by bacteria. Otherwise not, the solids will flow out of the tank and get into the drain field which will result in its blockage.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
What is the average size of a home septic tank?
Common residential septic tanks range in size from 750 gallons to 1,250 gallons. A septic tank is a self-contained unit designed to hold residential wastewater. The system is comprised of two main components: the tank and the drain, or soil absorption field.
What size septic tank do I need for a tiny house?
Tiny homes typically require a 500 to 1,000-gallon septic tank. Though, it’s not always possible to implement a tank of this size. In some states, for example, the minimum tank size is 1,000 gallons. There may be exceptions to this rule if your home is on wheels.
How long do septic tanks last?
A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
What to do after septic is pumped?
After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.
- 1) Get on a Schedule.
- 2) Take Care of the System.
- 3) Know the Parts of Your System.
- 4) Check Other Possible Issues.
How do you tell if your septic tank is full?
How to tell your septic tank is full and needs emptying
- Pooling water.
- Slow drains.
- Odours.
- An overly healthy lawn.
- Sewer backup.
- Gurgling Pipes.
- Trouble Flushing.
How big should my drain field be?
A typical septic drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36″; or per the USDA, 2 feet to 5 feet in depth.
Can a leach field be too deep?
Drain Field Depth The result is a drain field about 3 to 4 feet deep. Sometimes, however, a drain field may need to be a bit shallower and can result in drain pipes as close to the surface as 6 inches. Underground obstacles can cause this situation.
What can you put on top of a septic field?
Put plastic sheets, bark, gravel or other fill over the drainfield. Reshape or fill the ground surface over the drainfield and reserve area. However, just adding topsoil is generally OK if it isn’t more than a couple of inches. Make ponds on or near the septic system and the reserve area.
What Size Septic Tank Do I Need
The size of an underground septic tank is referred to as its total volume handling capacity in this article, and it will be discussed in further detail later in this article. For additional information on above-ground septic tanks and systems, see our page on above-ground septic tanks. The minimum septic tank capacity requirements are determined by a variety of variables. State, county, and/or city regulations may specify permitted tank sizes, as well as tank materials and installation.
The size of the septic tank will vary depending on whether it is intended for domestic or commercial usage; in this section, we will cover residential use.
Shortly stated, the required size of a septic tank will be determined by the following factors: (1) the specific septic system type; (2) local government requirements; (3) the compatibility of the ground geology; and (4) the anticipated volume of wastewater depending on the size of the residence.
However, this is not true.
Furthermore, plastic septic tanks will not corrode, are weatherproof, are waterproof, are less expensive, are lighter, and are easier to build.
1) The Specific Septic System Type
There are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. The scope of this article does not allow for a comprehensive discussion of each system type and its associated size requirements. We are referring to traditional gravity-fed anaerobic septic systems in this context when we say “system type.” The anaerobic septic system is the most prevalent type of septic system, and it is the one that most people think of when they imagine a septic tank.
- Generally speaking, there are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. It is beyond the scope of this article to provide an overview of each system type and their size requirements. Conventional, gravity-fed anaerobic septic systems are the sort of system we are talking about here. It is the anaerobic septic system that is the most commonly seen and the one that most people envision when they think of a septic tank or leach field. The following are the seven most popular types of septic systems, and modern polyethylene septic tanks may be used in nearly all of these systems that require a tank, if not all of them.
If your septic tank system is anything other than a traditional, anaerobic system, the instructions in this page may not be applicable in their entirety to your situation.
2) Local Government Regulations
The laws for septic tanks imposed by local governments vary greatly across the United States. In part, this is due to the significantly diverse soil geography and water features that exist from state to state and can even differ by a few miles in some cases. In order to determine the appropriate septic tank size and the best position on the land for installation, it is essential to consult with local government rules first. Take, for example, theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health, which provides a comprehensive informational overview of codes, rules, and regulations frequently promulgated by governing bodies, as well as common terminology and definitions in the industry.
3) Suitability of the Ground Geology
The subterranean soil type has a significant impact on the efficacy of the system and, consequently, the size of the septic tank. This topic is highly tied to the rules of the local government. In most cases, it is related to the standards and recommendations of a designated authority that regulates septic tank installations, which is typically the department of health. In order to determine whether or not the ground is suitable for a septic tank system, a trained specialist must come out to the prospective installation site and conduct a series of tests.
A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in an appropriate manner.
Whether you are hiring an experienced professional or doing it yourself, it is your obligation to contact your local oversight agency and arrange for perc tests and/or ground area evaluations to be performed.
4) The Expected Volume of Wastewater
The typical amount of wastewater that will be generated and that the septic tank will be able to manage is the most essential factor in determining the size of the septic tank that is required. In a home with simply a septic system, all wastewater is disposed of in the septic tank unless a separate system for managing greywater is in place to handle the waste. In order to calculate and approximate these values for residential dwellings, business structures, and facilities, extensive study has been carried out.
Starting with a 1000-gallon septic tank for residential usage, the advice is to go from there.
Some experts propose adding an additional 250 gallons of septic tank capacity for each additional bedroom over three bedrooms.
This is frequently the case when considering the situation collectively for the entire household rather than individually.
This article has demonstrated that septic tank recommendations are extremely diverse and depend on a variety of factors like where you reside, local government rules, subterranean soil type, house size, and the amount of wastewater that your unique home is predicted to produce.
Minimum Septic Tank Capacity Table
For further information on the minimum septic tank capacity dependent on the number of residential bedrooms, please see the following table:
| Number of Bedrooms | Minimum Septic Tank Size | Minimum Liquid Surface Area | Drainfield Size |
|---|---|---|---|
| 2 or less | 1000 – 1500 Gallons | 27 Sq. Ft. | 800 – 2500 Sq. Ft. |
| 3 | 1000 – 2000 Gallons | 27 Sq. Ft. | 1000 – 2880 Sq. Ft. |
| 4 | 1250 – 2500 Gallons | 34 Sq. Ft. | 1200 – 3200 Sq. Ft. |
| 5 | 1500 – 3000 Gallons | 40 Sq. Ft. | 1600 – 3400 Sq. Ft. |
| 6 | 1750 – 3500 Gallons | 47 Sq. Ft. | 2000 – 3800 Sq. Ft. |
Take note of the following in relation to the table above:
- As defined by the State of New York, the Minimum Liquid Surface Area is the surface area given for the liquid by the tank’s width and length measurements. The range of Drainfield Sizes is depending on the kind of groundwater present. The State of Michigan provides the above-mentioned drainfield recommendations, which might vary greatly depending on local standards and terrain.
Additional Thought: Can a Septic Tank Be Too Big?
In the absence of consideration for cost, it is reasonable to ask: “Can a septic tank be too large?” The answer is a resounding nay. As long as the septic tank is placed appropriately, it is impossible for a septic tank to be too large; the only thing that can happen is that it is too little. According to the majority of suggestions, constructing a larger-capacity septic tank is frequently the safer and more preferable solution. The following are the reasons behind this:
- In the absence of consideration for cost, it is reasonable to wonder: “Can a septic tank be too large?” No, that is not the case. It is possible to have a septic tank that is too large, but this is only possible if the tank is placed appropriately. When it comes to septic tank installation, the majority of experts agree that establishing a bigger tank is the safest and more preferable alternative. This is due to a variety of factors, including:
Takeaways | What Size Septic Tank Do I Need
The septic tank size recommendations offered here are merely that: suggestions. They are built on a foundation of information gathered from government and academic sources. The actual size of the septic tank you require will vary depending on the factors discussed in this article. There is no “one-size-fits-all” solution when it comes to determining the appropriate septic tank size for your property. There is a great deal of variation depending on where you reside. With addition to providing a basic insight into the septic tank and system size that may be most suited to your application, the providedMinimum Septic Tank Capacity Tablecan also assist in cost estimations.
Before beginning any septic tank installation project, check and double-check with the state, city, or local county’s agency that is in charge of septic tanks, soil testing, and permissions.
If you’re searching for a chart of tank sizes, have a look at our page on the many sizes and quantities of septic tanks available.
They are available in both single chamber and double chamber designs.
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative. They can assist you in planning the intricacies of your septic system, including which sort of septic system will be most beneficial to you.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Vehicles should not be allowed on or near the drainfield. Planting trees or anything else with deep roots near the drain field’s bed is not recommended. Clogged pipes are frequently caused by the roots of plants; Downspouts and sump pumps should not be drained into the septic system; and If you want to tamper with or change natural drainage characteristics, do so after researching and evaluating the impact on the drain field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other similar materials.
Easy maintenance and inspection are made possible as a result of this; To aid with evaporation and erosion prevention, plant grass in the soil.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
Your septic system is normally buried between four inches and four feet underground, depending on the climate.
Standard Septic Systems
When it comes to treating residential wastewater, a regular wastewater system combined with a soil absorption system is the most cost-effective technique currently available. However, in order for it to function correctly, you must select the appropriate septic system for your home size and soil type, and you must keep it in good working order on a regular basis.
What size septic tank do I need?
Septic tank size requirements are determined by the number of bedrooms in a house, the number of people who live there, the square footage of a house, and whether or not water-saving gadgets are installed. If you want to obtain a general sense of what size septic tank your home requires, look at the table below.
| Bedrooms | Home Square Footage | Tank Capacity |
| 1 or 2 | Less than 1,500 | 750 |
| 3 | Less than 2,500 | 1,000 |
| 4 | Less than 3,500 | 1,250 |
| 5 | Less than 4,500 | 1,250 |
| 6 | Less than 5,500 | 1,315 |
How often should my tank be pumped?
A regular pumping of the tank is required to maintain your system operating properly and treating sewage efficiently. Sludge collects at the bottom of the septic tank as a result of the usage of the septic system. Because of the rise in sludge level, wastewater spends less time in the tank and solids have a greater chance of escaping into the absorption region. If sludge collects for an excessive amount of time, there is no settling and the sewage is directed directly to the soil absorption region, with no treatment.
You can find out how often you should get your tank pumped by looking at the table below.
If you fail to maintain the tank for an extended period of time, you may be forced to replace the soil absorption field.
Solids can enter the field if the tank is not pumped on a regular basis.
Wet soils that have been saturated by rains are incapable of receiving wastewater. Planting cool-season grasses over the soil absorption field in the winter can aid in the removal of water from the soil and the maintenance of the system’s appropriate operation and performance.
Other maintenance
Another maintenance activity that must be completed on a regular basis to protect the system from backing up is to clean the effluent filter, which is located in the tank’s outflow tee and is responsible for additional wastewater filtration. This filter eliminates extra particulates from the wastewater and prevents them from being clogged in the absorption field, which would cause the absorption field to fail prematurely. You may clean the filter yourself by spraying it with a hose, or you can have your maintenance provider clean the filter for you if necessary.
Two critical components
A septic tank and a soil absorption system are the two primary components of a standard treatment system.
Tank
The septic tank is an enclosed, waterproof container that collects and treats wastewater, separating the particles from the liquid. It is used for primary treatment of wastewater. It works by retaining wastewater in the tank and letting the heavier particles (such as oil and greases) to settle to the bottom of the tank while the floatable solids (such as water and sewage) rise to the surface. The tank should be able to store the wastewater for at least 24 hours in order to provide time for the sediments to settle.
Up to 50% of the particles stored in the tank decompose, with the remainder accumulating as sludge at the tank bottom, which must be cleaned on a regular basis by pumping the tank out.
Drainfield
Ultimately, the soil absorption field is responsible for the final treatment and distribution of wastewater. Traditional systems consist of perforated pipes surrounded by media such as gravel and chipped tires, which are then coated with geo-textile fabric and loamy soil to create a permeable barrier. This method depends mainly on the soil to treat wastewater, where microorganisms assist in the removal of organic debris, sediments, and nutrients that have been left in the water after it has been treated.
As the water moves through the soil, the mat slows its passage and helps to prevent the soil below the mat from being saturated.
The grass that grows on top of the soil absorption system takes use of the nutrients and water to flourish as well.
Septic tank types
There are three primary types of septic tanks used for on-site wastewater treatment: cisterns, septic tanks, and septic tanks with a pump.
- Concrete septic tanks are the most popular type of septic tank. Fiberglass tanks – Because they are lightweight and portable, they are frequently used in remote or difficult-to-reach sites. Lightweight polyethylene/plastic tanks, similar to fiberglass tanks, may be transported to “difficult-to-reach” sites since they are one-piece constructions.
Septic tanks made of concrete are the most frequent. Fiberglass tanks — Because they are lightweight and portable, they are frequently used in remote or difficult-to-reach areas. Lightweight polyethylene/plastic tanks, similar to fiberglass tanks, may be transported to “difficult-to-reach” sites due to their one-piece design.
Factors in septic maintenance
A critical consideration in the construction of a septic tank is the link between the amount of surface area it has, the amount of sewage it can hold, the amount of wastewater that is discharged, and the rate at which it escapes. All of these factors influence the effectiveness of the tank as well as the quantity of sludge it retains. The bigger the liquid surface area of the tank, the greater the amount of sewage it can hold. As more particles accumulate in the tank, the water level in the tank grows shallower, necessitating a slower discharge rate in order to give the sludge and scum more time to separate from one another.
An aperture must be utilized on the tank lid if it is more than 12 inches below the soil surface, and a riser must be used on the openings in order to bring the lid to within 6 inches of the soil surface.
It is quite simple to do maintenance on the tank thanks to these risers.
Soil types
There are three types of soil textures: sand, silt, and clay, and each has an impact on how quickly wastewater filters into the soil (a property known as hydraulic conductivity) and how large an absorption field is required. Sand transports water more quickly than silt, which transfers water more quickly than clay. According to Texas laws, these three soil textures are subdivided into five soil kinds (Ia, Ib, II, III, IV). Sandy soils are classified as soil type I, whereas clay soils are classified as soil type IV.
- The Hydraulic Loading, which is the quantity of effluent applied per square foot of trench surface, is also significant in the design.
- For this reason, only nonstandard drain fields are suitable for use in clay soils due to the poor conductivity of clay soils.
- The Texas A&M University System’s Agricultural Communications department.
- L-5227 was published on April 10, 2000.
How Do I Know What Size My Septic Tank Is?
Posting date:Septic tanks are available in a variety of forms and sizes, and it is easy to forget — or never learn — what size septic tank is installed on your property. Because the size of your septic tank has an impact on how often it should be pumped, it’s crucial to know how big your septic tank is. There are two options for accomplishing this (but only one way to know for certain).
Rely on current records
That documents may have been left behind by the original system installation, the last service company that pumped out your tank, or even the previous owner. You may also call the septic permit offices in your county and ask for a copy of the documents pertaining to your septic system. These documents can offer information about your septic tank’s location, size, and layout, but they are not always correct. Consider looking around the inside of your house for hints as well.
The size of the septic tank you require is determined by the number of bedrooms in the house as well as the square footage of the house. Use this chart to gain an estimate of the size of your septic tank, which you may use to plan your next project.
| Bedrooms | Tank Capacity |
| 1 or 2 | 750 |
| 3 | 1,000 |
| 4 | 1,250 |
| 5 | 1,500 |
Hire a septic maintenance provider
Although documentation and the size of your home can provide you with an estimate of the amount of septic tank you may have on your land, this estimate may be nothing more than a best guess at best. It is possible that the documentation is incorrect, and that a former owner installed a larger or smaller tank than was necessary. Having a septic care provider locate, open, and pump your tank is the only method to know for certain the size of your septic tank. At that point, he or she will be able to tell you how big it is and whether or not it is in excellent condition or requires maintenance.
Septic tank size affects pumping schedule
What does it matter whether you know the size of your septic tank, and why is it important? Because it has an impact on how frequently it needs to be pumped in order to maintain top performance. As a general rule, we recommend that you pump your septic tank every three to five years; the smaller the tank, the more frequently it should be pumped. Tanks that are not maintained properly over an extended period of time are more likely to get clogged or fail, necessitating costly repairs or replacement.
We are septic experts
Van Delden Wastewater Systems will assist you with your septic tank needs, whether you need help finding, sizing, or pumping it. We established our first septic system in 1937 and have since become experts in all sorts of septic systems, as well as Clearstream aerobic systems, among other things. Please contact us right away for any of your septic system requirements. Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future.
Florida Department of Health in Volusia
- How can a new business determine whether or not it need an examination of its septic system? In order to add a room to my house, why do I need to get the current septic tank system authorized first? Who determines whether or not I require a mound septic system
- What exactly do I need to do in order to fix my drainfield? Does the government offer any help programs for septic system repairs?
1. What is the reason for an inspection of the septic tank system for a new business?
A shop in the appropriate size and location has been discovered for my new business, which I want to launch shortly after. When I went to receive my Business Tax Receipt (BTR), (formerly known as an occupational license), they informed me that I needed to get the septic tank system certified by the Florida Department of Health in Volusia County. I agreed to this. A: According to Florida Statute 381.0065, all companies that rely on a septic tank system for sewage disposal are required to acquire clearance from the local health authority whenever the company owner, the kind of business, or a tenant changes.
Modifications to company activities may result in an increase in sewage flow or a change in sewage characteristics.
Who is in charge of completing and submitting the application? The Existing Commercial Inspection of Septic System Applicationcan be filed and paid for by the owner or renter of the property in question. Section 1: Introduction
2.What is the reason to have the existing septic tank system approved before I add a room onto my home?
I intend to expand my current residence by adding a room. The building department informed me that they would not grant a building permit unless the current septic tank system had been authorized by the department. Because it will not be air conditioned, I do not believe that I will be required to do so. If you are planning to build an addition to your current house, you will need to have your existing septic system inspected first. This inspection technique is required in order to establish whether or not the current septic system has sufficient capacity to accommodate the extension.
This criterion is not affected by whether or not the addition has air conditioning or heating.
Applications and guidelines for a Residential Inspection of Septic System Application for an Existing Septic System Section 1: Introduction
3. Who determines if I need a mound septic system?
I possess a piece of land on which I intend to build a house. According to a buddy of mine, I will most likely require a mounded septic system in order to properly dispose of waste. My lot is high and dry, and it never flooded during the recent torrential rains, thus I do not want a mound built on top of it. The Florida Administrative Code, Chapter 64E-6, mandates a 24 inch buffer between the wet season water table and the bottom of the drainfield during the rainy season. It is possible for water tables to change dramatically between wet and dry seasons.
As soon as the water table has been determined, a permit is drafted in accordance with state law requirements.
If sod is to be used on the slopes, a 2:1 slope is necessary for mounds up to 36 inches in height, and a 3:1 slope is required for mounds higher than 36 inches in height; if hay and seed is to be used on the slopes, a 5:1 slope is required regardless of the height of the mound.
Application for a New Septic System Construction Permit, as well as instructions on how to complete the application
4. What do I need to do to fix my drainfield?
My drainfield isn’t performing as expected. A septic system repair permit must be obtained before any work on your septic drainfield may be done.
5. Are assistance programs for septic system repairs available?
If you qualify, the Volusia County Community Assistance Division may have cash available to you.
Contact them for more information. Please email [email protected] or call 386-736-5955 for further information. Section 1: Introduction
Septic Tank Installation and Pricing
To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.
Who Needs a Septic Tank?
For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.
How to Prepare for Your Septic Tank Installation
Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.
Receive Multiple Estimates
Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.
Test the Soil and Obtain a Permit
For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.
Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test.
Plan for Excavation
Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home.
Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected. Adobe Licensed (Adobe Licensed)
The Cost of Installing a Septic Tank
There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.
Percolation Test
A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested. Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.
Building Permit Application
A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.
Excavation and Installation
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.
Types of Septic Tank Systems
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally constructed. It depends on the size of your home, the type of system you choose, and the material of your septic tank that you want to install. A list of the numerous treatment methods and tanks that are now available, as well as the normal pricing associated with each, is provided below.
Types of Septic Tanks
- Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are damaged. It is possible that concrete tanks will cost up to $2,000 depending on their size. Plastic —While plastic tanks are cost-effective, they are also susceptible to damage. They are around $1,200 in price. Fiberglass —While fiberglass septic tanks are more durable than their plastic counterparts, they are susceptible to shifting or displacement if the water table rises to an excessive level. Depending on the model, these tanks may cost up to $2,000
More information may be found at: Septic Warranty Coverage and Costs.
Using Your Septic Tank
It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.
Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.
What do I do if My Septic Alarm is Going Off?
In the event that your septic alarm goes off, it may surely create some anxiety and uncertainty; and if you happen to be experiencing this right now, then you’ve arrived to the correct location! Don’t be concerned; it does not necessitate urgent action. Instead, take your time to go through this full essay so that you will be prepared to act now or in the future if the situation arises. What Septic Systems Are and How They Work The alarm works in conjunction with the septic system to alert you when the water level within the pump tank has increased to an unsafe level or has decreased to an unsafe level.
The timer is in charge of regulating the time intervals during which the pump is permitted to pump wastewater into the drainage system.
Thus, during periods of excessive water use, the drain field is kept from getting overflowing, which might cause damage to the drainage system.
A large amount of water is injected into the system in between pumping cycles for whatever cause, and the water has nowhere else to go but back into the system’s pump tank.
Depending on how much water was and continues to be put into the system and how the pump is set up to operate on a timer, it may take many pumping cycles until the water levels are returned to normal. Causes of the alarm going off in the first place
- There is an excessive amount of water being put into the septic system. This is the result of excessive water use, which might be caused by multiple loads of laundry, an excessive quantity of dishwashing, or a disproportionate number of long showers.
- Somehow, groundwater is making its way into the system. If there is an excessive amount of standing water surrounding the septic tanks, whether generated by rain or another source, the water may seep into the tanks and cause the internal water level to rise.
- It’s possible that one of the components of the septic system is malfunctioning. If anything goes wrong with your system — including the pump and floats — the alarm and timer will go off and the septic system will stop working correctly.
The Best Thing to Do If Your Alarm Goes Off Alternatively, if you hear an alert, you should press the red button or turn on the alarm box. The alarm will be turned off as a result of this action. There should be a red light and a green light on the alarm box, which should be situated someplace on the unit. The green light indicates that the alarm is operational and should be left on at all times. It is shown by a red light if the alarm is getting a signal from the pump tank indicating that the water level is increasing above or decreasing below what is expected.
- If the breaker occurs to be tripped, look around the septic tanks to see if there is any standing water.
- It is possible that the red light on the alarm box will go out on its own after allowing the septic system to operate for a couple of pump cycles (which should take approximately 10-15 hours).
- If the red light turns off, it signifies that the system is operating properly and that it only needs to catch up with the extra water that has overflowed into the storage tank.
- To be clear, an alarm signal from the septic system does not always imply that sewage is about to back up into the house right away.
- Do you require septic system repair on a regular basis or emergency service?
- Want to learn more about septic systems?
Department of Environmental Quality : About Septic Systems : Residential Resources : State of Oregon
In areas where houses and businesses are not linked to a municipal sewage system, a septic system is the most popular type of sewage treatment for those areas. When simplified to its most basic form, a septic system is comprised of two parts: a septic tank in which solids settle and decay and a drainfield in which liquid drained from the tank is treated by bacteria in the soil. Septic systems that are more sophisticated are constructed in places with high groundwater levels and/or poor soils.
Septic systems that are properly operating treat sewage in order to reduce groundwater and surface water contamination.
Learn more about how septic systems function by reading this article.
Before you buy
In areas where houses and businesses are not linked to a municipal sewage system, a septic system is the most popular method of sewage treatment. Essentially, a septic system is comprised of two parts: an inlet tank, where solids settle and degrade, and a drainfield, where liquid released from the tank is treated by bacteria in the soil. When groundwater is high and/or the soil is poor, more sophisticated septic systems are built. As an example, and filteroralternative treatment technology systems, which treat wastewater to a greater extent before discharging it into a drainfield, are available.
Having a dysfunctional system puts your family and neighbors’ health at risk while also causing environmental damage. See this article for additional information on how septic systems work: septic system operation.
- Well construction, fill, roads, and other modifications can all have an impact on appropriateness. Is the land suitable for your development needs, taking into account the kind of system stated as acceptable on the report and the placement of the septic system that has been approved?
If the property has not yet been examined, you may choose to request that the present owner arrange for an evaluation to be done. Application for a site review can be made through either the Department of Environmental Quality or a local government contract agent. Before deciding to acquire the land, you must determine what sort of septic system will be necessary, as well as whether or not the permitted system site will fit your development requirements. Existing sewage treatment systems- If you are considering acquiring a home with an existing septic system, you should engage a trained inspector to assess the system before making the purchase.
- Is it true that the system was implemented without a permit? If not, it is possible that the system is very old (permits have been necessary since 1972, and in certain counties even earlier), or that it was unlawfully built. Systems that have been illegally developed may pose a threat to public health or produce pollution. In the future, you may be forced to upgrade or replace the system, and you may be held accountable and penalized if the system malfunctions or poses a concern to public health and safety. If your family or business has a large number of members, is the system the correct size to meet their needs? Permit documents often include information on the system’s capacity in gallons per day. Typical household water use is 450 gallons per day for a four-bedroom home. How old is the system, and has it been adequately maintained over its lifetime? Is there documentation demonstrating that the septic tank was pumped on a regular basis? Have there been any difficulties or complaints that have been brought to your attention in the past? It is possible that your local permitting agency has records of complaints or infractions that have not been addressed yet. Before you moved here, how many people lived in the house? Perhaps the approach works well with a single person but not so well with four individuals. Is the septic tank connected to all of the plumbing fittings
- And Is there evidence of a septic system failure, such as puddles over the septic tank or flooded drainfields? If the property is next to surface waterways, check to see that there are no direct discharges from the property. When it comes to septic system replacement, is there a suitable location if the existing system fails? In the event that there are any septic permit documents, they will show the replacement area that should still be “laid aside” for this purpose. What is the role of a qualified inspector? Some septic installers and pumpers have received training in the inspection of existing systems, while others specialize in the installation of new septic systems or pump tanks, as appropriate. Certified maintenance providers may also have the qualifications of a qualified inspector. The goal is to find out what their credentials are in septic system assessments (as opposed to only septic tank evaluations), as well as to obtain some recommendations. Verify the credentials of the references before hiring a contractor.
Signs of septic system failure
- Pools of water or wet places, unpleasant aromas, and/or dark gray or black soils in the vicinity of your drainfield are all signs that something is wrong. Water from the sewer overflows into the lowest drains in the home. The sound of drains gurgling and poor draining (first check for obstructions)
- Soapy flows onto the ground surface, into ditches, or into surface waterways It is impossible to mow over the drainfield because the earth is too soft.
Installing a new system
In order to have a new septic system installed, a two-step procedure must be followed. 1. Submit an application for a site review. The tests pits you give on your property will be evaluated by a DEQ or county agent, who will decide the size and kind of septic system that will be required, as well as the placement. 2. Submit an application for a building permit. For application forms, contact your local DEQ office or county agent, or you can obtain DEQ application forms from this website. There is a cost for both the site appraisal and the issuance of the building permit.
Maintaining septic systems
By having your septic tank tested for solids accumulation on a regular basis, you may prevent having to pay for expensive repairs. When the solids buildup in your septic tank exceeds 40%, you should have it pumped by a pumper who is licensed by the DEQ. For advice on how often to get your septic tank examined, contact the Department of Environmental Quality. Maintaining the condition of your septic tank on a regular basis (every 5 to 7 years) and checking for solids accumulation will save you money on costly repairs.
If you follow the basic septic system DO’s and DON’Ts, a properly designed and maintained system may survive for a very long period.
Septic Maintenance Tips Atlanta GA – Septic Maintenance Near Me
Anyone who has dealt with a clogged septic system will attest to the fact that it is not a pleasant experience. However, at Septic Masters, we have discovered that the majority of septic system backups and problems may be avoided by correctly maintaining and caring for your septic system. We believe it is critical for anybody who lives or works near a septic system to be aware of the best practices for septic system maintenance.
Septic Maintenance Tips
The first and most important septic care advice that everyone should be aware of is that you should get your tank maintained or pumped on a consistent basis. This is the most effective technique for your septic expert to avoid blockages as well as identify any little difficulties that might cause a major problem later on in the future. You should have your tank pumped every three to five years, depending on the size of your tank and the number of people in your household. But what happens in the intervals between pumpings?
It all boils down to your everyday habits and routines. The wrong things or garbage that is flushed down your drains might cause your septic tank to become overburdened and rupture. Items to avoid flushing or allowing to go down the sink’s drain include the following:
- Oil or grease, baby wipes, paper towels, cat litter, and feminine things are all prohibited.
Essentially, if anything does not decompose organically, it should not be flushed down the toilet. Cleaning products containing chemicals, such as bleach, should be avoided as well. The bacteria in your tank are responsible for breaking down waste in a timely way. Many of the chemicals included in cleansers destroy this bacteria, which means you will need to have your tank pumped sooner than you had anticipated. As an alternative, search for cleansers that are labeled as septic-friendly.
Septic System Repair Near Me
Septic Masters is here to assist you whether it is time for septic tank pumping or servicing or you are experiencing problems and require septic system repair. We provide emergency septic service in Atlanta, Georgia, and the surrounding metro region 24 hours a day, seven days a week. To book an appointment, please contact us right away.
Why is lots of water bad for septic, and how can I take long showers without hurting it?
The only issue I can see is an over-saturation of the ground, which will result in the earth being unable to absorb any of the effluent as it is intended to do. The fact that you have lived there for 6 months and have not noticed any indicators of difficulties at the leaching field suggests that there should not be a problem. Bathroom and kitchen sinks and bath tubs are expected to be constructed for the quantity of water that will be poured into the leaching field from the entire house. I’ve had a septic system for the past 24 years and have never had any problems with it.
It is a 1989 house with three bedrooms and one and a half bathrooms.
Water on its own will have no effect on the situation.
Although I’ve worked on properties where the owners insisted on having a trash disposal, they must be dedicated to pumping it out on a regular basis since, in a sense, it is serving as a holding tank, which they must do on a regular basis.
