What Color Is The Scum In The Septic Tank? (Correct answer)

When you open a working septic tank, what you see as the very top level of the wastewater in the septic tank is the upper surface of the floating scum layer – the brown line in our sketch at above left.

What does scum in septic look like?

Scum: Substances lighter than water (oil, grease, fats) float to the top, where they form a scum layer. This scum layer floats on top of the water surface in the tank. Aerobic bacteria work at digesting floating solids.

What happens to scum in septic tank?

The floating scum layer and settled sludge layer accumulate in the septic tank until the tank is pumped / emptied by the septic pumping contractor. In turn, the septic pumping company then hauls the septage to an approved disposal site, most-often to a waste treatment plant.

What happens to sludge and scum in septic tank?

Through the normal metabolic activities of these resident bacteria, liquification of the scum and sludge layers occur. In other words, when operating properly bacteria cause organic materials from both the sludge and scum layers to be broken down into smaller sized substances.

How do you break up a scum in a septic tank?

Break Up the Scum Layer All it need is to take a pole, rake or hoe and break-up the surface. This will ensure that you are letting more air into your tank, allowing the bacteria in the tank to become more active, to actually break down both the surface waste and that in the lower layers.

How do I check the sludge in my septic tank?

To measure the sludge layer:

Slowly lower the tube into the septic tank until it touches the bottom of the tank.
As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

Why is my septic tank foaming?

Phosphates that pass through the septic system due to improper design can enter surface water, causing very high growth rates of algae. Surfactants typically cause foaming or suds in water.

What are the signs that septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.

Standing Water Over Your Septic Tank.
Bad Smells Coming From Your Yard.
You Hear Gurgling Water.

You Have A Sewage Backup.
How often should you empty your septic tank?

What does septic sludge consist of?

Sludge: Sludge is the solid material that settles at the bottom of your septic tank to form a thick layer. The sludge is made up of non-liquid materials like soil, bones, food particles, etc. There are anaerobic bacteria that thrive in the bottom of your tank that feed off of this sludge layer.

How many inches is septic tank sludge?

at MEASURE SCUM & SLUDGE, the septic tank needs to be pumped when the floating scum layer has accumulated to reach 3 inches of the bottom of the outlet baffle or tee. at MEASURE SCUM & SLUDGE, normally a septic tank should be pumped when the bottom layer of sludge is within 18 inches of the tank outlet.

What floats on top of septic tank?

Heavy solids, such as dirt and digested waste, will sink to the bottom of the tank to form the sludge layer. Meanwhile, solids that are lighter than water, such as grease, hair, and toilet paper, will float to the top to form the scum layer.

Should a septic tank have a crust?

It is normal to have a scum or crust on top of the liquid. Sometimes this will be over an inch thick and appear almost solid. The level of the liquid or crust should be below the inlet baffle. If it is above the inlet baffle, there is a problem with the outlet of the tank or leach field.

How full should your septic tank be?

But what does full really mean? A septic tank should always be “filled” to its normal liquid level, or the bottom of the outlet pipe which carries effluent to the absorption area. This normal liquid level is usually between 8” to 12” from the top of the tank on average (see picture at right).

What causes black sludge in septic tank?

Sulfate-reducing anaerobic bacteria usually get extremely active if the septic tank water has a sulfate source. If your tank or any of its components is made of iron, the hydrogen sulfide will react with it and thereby form black iron precipitates.

What eats sludge in septic tank?

One example of a homemade remedy is to flush ¼-½ a cup of instant yeast down your toilet. The yeast eats away at the sludge and helps loosen it, breaking it down so that wastewater can get through.

How do you clean septic sludge?

Start emptying To ensure the solids are emptied, the septic tank cleaning company will have to ensure the sludge and scum layers are disintegrated and mixed with the liquid. To do this, they will start by pumping some of the liquid out and then pumping it right back at the bottom of the tank.

Sludge 101

Inquiry:I am new to the field of pumping and am intrigued by the biological activities that take place in each specific sewage treatment system. Despite the fact that I have a slew of questions, I will only submit one: I’d want to know exactly what sludge is. According to one online source, sludge is comprised of sewage particles that swiftly sink through the surface scum. According to another source, sludge is a waste product produced by enzymes when they are performing their decomposition function on waste material.

If so, is this a contributing factor to drainfield glazing?

Sludge is a term that can be applied to any substance that has settled as a result of bacterial or yeast activity, without qualification.

In a municipal sewage treatment system, the majority of the bacterial activity is aerobic in nature.

This sludge has a composition that is similar to that of soil.

As a result, the “sludge” consisted primarily of organic debris with a small amount of nitrogen added.
Consequently, I’ll go over septic tank sludge with you.
Anaerobic bacteria steadily breakdown the solids, resulting in a reduction in their volume over time.

Due to the rise in the sludge layer, there is a reduction in the amount of liquid in the septic tank, and some particles may pass through the tank and into the soil absorption system.
You must inform your consumers about the current circumstances in this regard.
When bones and coffee grounds are thrown into the garbage disposal, they contribute to the sludge layer since they do not decompose due to bacterial action.

Home sewerage is likely to contain soap or detergent residues in addition to the sewage.

Cooking oils and fats float as well, becoming part of the scum layer as a result.

In addition, the scum layer takes up a portion of the liquid volume in the septic tank.

Before this can occur, the septic tank must be thoroughly cleansed and emptied out of the ground.

A settling tank is often installed in the sewage line before to the aerobic tank, according to the design.

The aerobic activity in the second tank is more effective in decomposing organic solids, but a residue in the aerobic tank must be removed on a regular basis.

Unless any of the sludges I’ve described are allowed to dry out, it will be impossible to separate and check any small particles, in my view.

Organic matter and nutrients are added by the sludge, which is then recycled to help plants develop.

Ideally, there should be little, if any, sludge or scum pouring out into the soil absorption area if the septic tank is properly maintained and cleaned on a regular basis.

The biomat is formed as a result of the presence of suspended organic particles in the effluent from the septic tank.

On the trench side, the biomat is anaerobic, whereas on the soil side, it is aerobic.

The biomat is designed to enable fluids to pass through it.

A biomat will always form in a soil absorption system because of the nature of the soil.

The pace of decomposition is determined by the texture of the soil.

Onsite sewage treatment maintenance is critical to the proper running of an onsite sewage treatment system in order for it to remain operational. This is the message you need to communicate to your consumers in the strongest possible terms.

Why You May Have A Septic Tank Crust

There are a variety of reasons why you may notice a septic tank crust on the surface of your septic tank’s surface. What is a septic tank crust, why you could have one, and what to do if you do have one are all discussed in this article. Taking care of a septic tank Keeping an eye on your sewage disposal system, including your septic tank, is a good idea, even though it’s probably not something you’ll want to get too close to every now and then. As you’d expect, keeping an eye on your septic tank and septic tank crusts is also a good idea, because it will ensure that your sewage disposal system remains efficient and safe.

Yes, it can be a little disgusting, but what exactly does it entail?

Do you know what you can do if you have septic tank crust, and will it indicate that you will need a septic tank pump-out or that you will have to call in the professionals to lend you a helping hand?

What is a Septic Tank Crust or Scum Layer?

On the surface of the septic tank lies a thin layer of material that will ordinarily (and should) float to the top. This often contains some fats, oils, and greases, and it’s a clear greenish, greyish, or even brown bubbling liquid that’s normally transparent. Lighter stuff will naturally climb to the top of the pile, just as solids will tend to sink to the bottom, according to fundamental science. Septic tanks are made up of multiple levels, which differ depending on what is put into them. The presence of this layer floating on top of your tank is not uncommon, and it is certainly not uncommon to see a few loose particles, like as feces and paper, that have drifted to the surface along the way.

Isn’t it true that a septic tank should include sludge all the way down?
The top layer is almost always likely to include some type of scum, however this is not always the case.
At the very bottom of your tank should be a layer of thick septic sludge, which, as you would guess, contains the majority of the natural waste that has been released into the system from your home over time.

Consider the following: why there could be a crust in the first place, and what you should do if there is any crust at all to address the situation.

Should Your Septic Tank Have a Crust?

As previously stated, the top layer of your septic tank should typically include some type of scum or scum-like substance. This is fairly common, and it has a tendency to be a little frothy and thin in appearance. If your septic tank is in good working order, it is usual to notice a scum layer on the surface of the water with a few bits and pieces floating to the surface. If you look closely, you may notice fragments of toilet paper and perhaps a few floating particles, despite the fact that it is really unpleasant.

Make no distinction between being a scruncher or a wadder; don’t think about it too much.

On the whole, while it’s disgusting to look at, you should be able to notice a greenish-brown color to the top scum on the surface.

If this sounds like the top layer of your septic tank, you generally don’t need to worry about anything at this point.

On rare occasions, though, this scum layer might harden and form a crust on the surface of the water. This is something that may generate a great deal of stress for septic tank owners, so it is important to understand what to expect in the long run. Is it even an issue in the first place?

What Causes the Surface Crust in a Septic Tank?

The surface crust on the surface of your septic tank is almost certainly going to contain a mixture of different oils and fats. As a matter of fact, there’s a word for it: FOG. FOG is an abbreviation for Fats, Oils, and Greases. They will never sink into the lower levels of the tank, therefore the only place they will ever be is at the top of the tank’s water column. Furthermore, because of the nature of these fatty liquids, they might have a tendency to solidify. Septic tank surface – there are no visible fats, oils, or grease.

However, if you leave your tank unattended for a period of several weeks or months, it is much than probable that this will occur.
If you leave it for an extended period of time, it might result in a crust.
To summarize, anything that is even somewhat heavy will sink to the bottom layer of the tank.

So while you may see a few floaters and the occasional piece of paper wadding floating upward into the scum layer, the most of what you see is likely to be FOGs (foul-smelling algae).

Lack of Septic Tank Activity

A lack of activity, such as a complete absence of use, contributes to the growth of septic tank crust. Because there is less fluid flowing about, FOG not only floats to the top of the layer and lingers there, but it also crusts over on the surface. This is as a result of the drying out of the FOG. It begins to harden, which means that your effluent and solid layers underneath it may become trapped and locked off. By doing so, you are preventing air from entering the effluent via the surface, depriving microorganisms of essential oxygen.

When it comes to dealing with the crust on a septic tank, you should only do it if you have a very strong stomach.

Consequently, you may want assistance in order to break through it and restore your tank’s full functionality.

Do I need to Improve My Septic Crust?

It’s easy to believe that a septic tank crust isn’t something to be concerned about in the first place. Leaving it to its own devices, on the other hand, will hinder the bacteria in the tank from getting down to business and breaking down organic matter. Bacteria, like all living organisms, require oxygen in order to thrive and reproduce. By allowing a septic tank crust to accumulate on the top layer of your septic tank, you are essentially preventing air from reaching the bacteria in your tank.

The crust that forms on the surface of a septic tank effectively closes off the effluent and solid layers, causing the bacteria to become anaerobic, become considerably less active, and emit unpleasant gases as a result of the lack of oxygen in the tank.

It is at this point that they begin to physically stink, thereby bringing your tank to a near-standstill in its operation.

3 Tips to Prevent Your Septic Tank From Crusting Over?

This trio of suggestions will keep your septic tank from being further crusted over while also reactivating the bacteria to a very efficient aerobic state?

1. Break Up the Scum Layer

First and foremost, you must disassemble the situation immediately. Simply breaking up the surface with a pole, rake, or hoe is all that is required. Increasing the amount of oxygen in your tank will help the bacteria in the tank to become more active, allowing them to really break down both the waste on the surface and that found in the bottom layers.

2. Use a Biological Septic Tank Deep Cleaning Solution

Deep cleaning your septic tank with a biological solution is recommended. This should aid in the digestion of any FOG present in the top layer, as well as the elimination of the crust over a period of a few weeks.

3. Reduce Your FOG Discharge

Reduce the quantity of FOG that is released from the kitchen sink by putting all used fats, oils, and greases in the kitchen trash bin as soon as they are finished cooking. A biological waste trap and drain cleaner that does not include “chemicals” can help to decrease FOG build-up in your tank and will guarantee that your drains run freely without the chance of becoming clogged with debris.

In Conclusion

Overall, dealing with a septic tank crust problem isn’t a particularly pleasurable experience. Crusts, on the other hand, should be avoided at all costs since they can cause serious difficulties for you in the long term. Draining and repairing septic tank problems later in the process is never enjoyable and will result in needless expenditure and inconvenience. We at Muck Munchers recognize that septic tanks are important infrastructure that people rely on on a daily basis. It’s really simple to let these tanks fall into chaos if you don’t pay attention.

A septic tank crust can cause issues, and in order to solve the problem, the crust must be broken in order for air to be allowed to flow in.

Learn more about what we can do to assist you by browsing our selection of septic tank goods online.

Everything You Need To Know About Your Septic System

Florida people rely on roughly 2.6 million septic systems to dispose of waste and wastewater on a daily basis, accounting for 30% of the state’s population. Homes and businesses in rural regions rely on these systems to dispose of garbage in an efficient and environmentally friendly manner.

What Are Septic Tanks Made From?

Septic tanks are a waterproof box composed of concrete, fiberglass, or polyethylene material that is used to dispose of sewage. In other words, there will be no debris, dirt, or water from the surrounding ground that may get into the tank. Septic tanks made of concrete and/or fiberglass are the most common types.

Common Styles Of Septic Tanks

ATUs treat and filter waste by separating it into three compartments: a garbage compartment, an aeration chamber, and a clarification compartment. An aerobic, or thoroughly oxygenated, environment is created in the effluent by forcing compressed air through it.

Because the bacteria thrive in this environment, waste decomposes more quickly than it would in a conventional septic tank. This helps to limit the quantity of organic material that enters the soil and groundwater around the house.

Double Compartment

Most tanks built since 1976 feature two compartments for filtering effluent, sediments, and wastewater that enters the tank during the construction process. The first compartment, which is placed adjacent to the intake pipe, is often bigger than the second compartment, which is located further away. It is possible to see the liquid flowing from the first container into the second compartment. Before the effluent is discharged into the outflow pipe, any remaining sludge and scum separate from the liquid.

Pump Tank

The quantity of wastewater that flows from the septic tank is controlled by a pump tank. Pump tank level increases as effluent accumulates in the tank and eventually reaches the level set by a control float. As soon as the float is activated, the pump starts pumping effluent into the drain field in a predefined volume.

Holding Tank

In lieu of septic tanks, holding tanks can be used to collect and store waste. They are either above or below ground and require constant pumping to remove the contents of their holding tanks. The majority of holding tanks are equipped with an alarm that sounds when the tank is full.

Single Compartment

A single compartment tank was utilized in the majority of septic systems constructed before to 1976. These tanks could hold up to 1,000 gallons of liquid at a time. After entering the tank and separating into three levels, liquid waste is discharged into the septic drain field via the outflow line.

What Is FOG?

Fats, oils, and grease (also known as FOG) are frequent cooking byproducts that occur naturally in a wide variety of foods and other items. While FOG is viscous when it first enters the septic tank, it cools swiftly as it comes into contact with the wastewater in the tank. However, because of its viscosity, FOG coats and covers every surface it comes into contact with when it solidifies.

How A Septic Tank Works

Solids sink to the bottom of the tank’s intake pipe, while FOG rises to the surface of the wastewater and collects at the top of the tank’s intake pipe. In most cases, the tank is large enough to keep wastewater for an extended period of time, allowing effulent separation to take place. There are three levels within the tank as a result of this separation: a sludge layer on the bottom, a wastewater layer in the middle, and a scum layer on top. bacteria, enzymes, and other microorganisms often present in human waste begin to break down the sludge layer and break down the sludge layer further.

Upon entry into the septic tank and drain field, two baffles direct and filter the water.

What Are Septic Tank Solids?

The majority of solids contained in a septic tank may be divided into three categories:

Non-biodegradable organic solids include pet litter, plastics, and other items that do not decompose over time
Biodegradable organic solids include vegetable scraps and other cellulosic compounds, as well as toilet paper
And biodegradable organic solids include solid human feces.

Septic System Drain Fields

After leaving the septic tank, effluent goes into a drain field, which is a network of underground pipes and dirt that collects the waste.

Other phrases that are commonly used include absorption field, leach field, and trench. The size of the space required is determined by the following factors:

Soil type
Seasonal variations in groundwater level

Amount of water absorbed each day
And soil percolation rate are all factors to consider.

The soil percolation rate is defined as the amount of water that the soil can absorb in one minute per inch of soil thickness. A significant consideration in determining the site of a septic drain field in Florida is the percolation rate, which is crucial because the state has a high water table.

How A Drain Field Works

An underground network of perforated pipes may be found in this location, which can be found in either several trenches or a gravel-lined soil bed. Drainage from the pipes filters through the gravel and dirt before entering the sewer system. Compaction of the soil has a significant impact on its function, which is why it is critical not to construct structures on it or drive or park vehicles of any size over it.

Why Is A Drain Field Important?

Natural filtration is provided for effluent, which is recycled back into the groundwater source. It is possible that biological and chemical pollutants may infiltrate the water and create health problems for anybody who consumed or came into touch with the water without this filtering system in place.

How To Find Your Septic TankSeptic Drain Field

The location of the septic system will be shown on the majority of property plans and surveys. Possibly handed to you after the sale of your house or company, these documents are also maintained on file at the county government office. The septic tank is often built along the sewage line that leads away from the house or other structure. When this line is many inches in diameter, it means that it is located at the lowest level of your home, such as a basement or crawl space. Stick a metal probe every two feet along the sewage line as it exits the house, following it all the way out to the street.

Locate the borders of the septic tank lid with the probe – typically tanks are 5 feet by 8 feet in size, so this may take some time.

As soon as you discover a discrepancy between the system location and previously prepared diagrams or maps, make sure to update these materials and retain a duplicate for your records.

The Septic Tank Pumping Process

In order to prepare for extraction, the floating scum layer is first broken up by alternately sucking out liquid from the tank and pumping it back in to break up the bottom solid layer. Pumping is accomplished through the two access ports, which are referred to as manholes. The tank should never be pumped through the inspection apertures on the baffle wall. This can not only cause damage to the baffles, but it can also result in insufficient waste removal from the tank. Until the septic tank is completely depleted, industrial vacuums are used to remove waste from the tank and into our tanker truck.

How Often A Septic Tank Should Be Pumped?

In most cases, every three to five years is sufficient.

However, depending on the size of your septic tank and the amount of sediments and wastewater you produce on a daily basis, you may need to contact a septic tank pumping firm such as Jones PlumbingSeptic Tank Service sooner rather than later.

What To Expect During A Septic Tank Pumping

Before starting the pumping process, it is necessary to measure the thickness of the scum and sludge. This information is important in determining the pace at which waste accumulates and in determining when the next pumping should be scheduled. The pumping process is monitored closely by our personnel, who are actively monitoring for any possible system problems, such as backflow from the outflow pipe. Backflow that is significant typically indicates a backup in the drainfield, whereas slight backflow indicates a weaker outflow line in most cases.

Septic Tank Cleaning

Septic tank cleaning and septic tank pumping are not the same thing, despite the fact that many people use the phrases interchangeably. Pumping just removes liquid and uncompressed materials; cleaning, on the other hand, eliminates any leftover solids before washing the interior of the tank with soap and water. Following the removal of the liquid layer from the tank, our professionals employ pressured jets of water to break up any residual particles in the tank. Solids are removed from the tank with the use of an industrial-grade vacuum and a connected hose before the inside of the tank is washed.

This can result in the formation of sinkholes or the breakdown of the entire system.

How Often Should A Septic Tank Be Cleaned?

The words septic tank cleaning and septic tank pumping are sometimes used interchangeably, however they are not the same. Pumping just removes liquid and uncompressed materials; cleaning, on the other hand, eliminates any leftover solids before washing the interior of the tank with soap and hot water. Following the removal of the liquid layer from the tank, our professionals employ pressured jets of water to break up any residual particulates. Prior to rinsing the tank’s inside, particles are removed using an industrial-grade vacuum and an associated hose.

This can result in the formation of sinkholes or the breakdown of the entire system.

How To Keep A Septic Tank In Good Condition Between Cleanings

The most effective strategy to ensure that your septic tank remains in good working order for many years is to be informed of what can and cannot be put into the system.

Don’t DisposeFlush Items At-Will

In order to degrade materials that enter the tank, a septic system relies on bacteria that are found in nature. Although it is a mutually beneficial connection, it is susceptible to being pushed out of balance depending on the materials that are disposed of. Fat, oil, and grease (FOG); chemicals, paints, fuels, and/or motor oils; disposable diapers, sanitary, and personal hygiene products; coffee grounds; egg and nut shells; and disposable diapers, sanitary, and personal hygiene products are all common household items that should never be flushed down the toilet.

Schedule Annual Inspections

Home and business owners may do an outside inspection of their septic system on their own. However, only a professional and skilled septic tank firm, such as Jones PlumbingSeptic Tank Service, should check the tank and its interior components. Because of the formation of toxic vapors and gases within the sewage treatment plant, it is dangerous to work near one without the proper safety equipment and training. Look for areas of unusually tall grass, sewage odors or smells, and unexplained standing water as you walk around the area where the septic tank is situated.

PumpClean The Tank As Necessary

Skipping regular septic tank services is a surefire way to end yourself in a situation that might have been avoided. Performing routine pumping and cleaning allows our personnel to check the overall health of the system and correct any issues that may arise before they become a major concern.

Keep Records Of Septic LocationService

It is essential to understand the location of the entire system in order to properly maintain it. Parking or driving cars over any portion of the septic system should be avoided at all costs. The weight of vehicles can cause the system to collapse. When this occurs, the only option for repair is a complete replacement. It is also recommended by Jones PlumbingSeptic Tank Service that you preserve records of when the system was examined, pumped, and cleaned for your own records and in case you decide to sell your home in the future.

Conserve Water

The volume of water entering a septic system has a greater influence on the health of the system than the amount of solids created by the system. The greater the volume of water that flows through the drain field, the shorter the functional lifespan of the drain field and the overall system. An excessive amount of water flow impairs effective separation of particles inside the tank, increasing the likelihood of clogged intake and outflow pipes, which can result in sewage backups in the tank.

Septic Tank Repair In Gainesville, FL

Too much water in the septic tank increases the likelihood of sediments being transferred into the pipes, which might result in a clogged system.

Aggressive Tree Roots

Tree roots are well-known for generating problems with septic tanks and systems. Many species of tree roots are stronger than septic tanks, and they can cause leaks and other structural damage by cracking the pipes and tank.

Common Septic Tank Repairs

Historically, tree roots have been known to cause problems with septic tanks. Septic tanks are durable, but several varieties of tree roots are even more so – powerful enough to shatter the pipes and tank, inflicting leaks and other structural damage in the process.

Broken Baffles

The baffles of a septic tank are responsible for keeping sediments contained within the tank. Rust or contact with sulfuric acid are the most common causes of damage. It is quite beneficial to have an annual septic check performed in order to see if there are any difficulties with the baffles before a problem occurs.

How To Prevent A Septic Tank Failure

The fact is that septic systems are not foolproof and that they benefit immensely from routine maintenance and upkeep.

The majority of failures may be avoided by paying attention to what goes into the plumbing and septic lines.

Only Flush Toilet Paper

As a rule, toilet paper degrades and disintegrates more quickly than other types of paper goods. Particularly problematic are paper towels and wet wipes, which are two of the most prevalent causes of septic tank clogging and premature tank cleanouts.

Never Pour FOG Down The Drain

FOG is extremely harmful to all plumbing systems, including the septic system. FOG, when it is in liquid form, readily flows into the septic tank and collects in the top scum layer of the tank. This may not appear to be a problem, but the mixture has the potential to run into the drain field, where it might cause contamination concerns with groundwater and the surrounding soil if allowed to do so.

Regular Drain Cleaning

The numerous commercial drain cleaners available may temporarily unclog a clogged drain and associated plumbing, but they do so at the expense of the septic system’s ability to function properly. They include chemicals that swiftly eliminate the bacteria that are important for the decomposition of particles within the septic tank once they are applied. The layer of solids accumulates quickly — and needlessly — on the surface of the water. As an alternative, call a plumber to do expert drain cleaning.

How To Tell When You Need A New Septic System

A septic system may last anywhere from 20 to 40 years if it is maintained properly and repaired when needed on time. However, if you detect any of these frequent indicators of a failing septic system, it’s time to call Jones PlumbingSeptic Tank Service to have a new septic system installed in your home or commercial property. The following are common indicators that the present system should be replaced:

Sinks and toilets that take a long time to drain

Plumbing that is always backed up
Sewage odors in the company, house, or yard
Patchy mushy, swampy, or damp areas of the yard Gray water that has accumulated

And grass that has grown more swiftly and is a darker shade of green

What To Know Before A Septic Tank Is Installed

In order to prevent the contamination of water sources and the creation of public health hazards that can result from incorrectly designed septic systems, the state of Florida and local municipalities have established rules and regulations to guide new septic system installations.

Required Applications, FeesPermits

The Environmental Health Service of the Florida Department of Health (FDOH) in Alachua County is responsible for issuing the necessary applications and permits. Before a permit may be issued, the house or business owner must submit a completed application, as well as a site plan, a building floor plan, and any applicable application costs to the local building department. A site evaluation is also necessary, which analyzes the overall condition of the land, as well as the soil type. Total fees are determined on the kind of septic system installed as well as the services provided by the county health division.

Minimum Tank Size

A minimum 900-gallon capacity is required for all septic tanks in Florida; however, this capacity requirement rises based on the size of the occupancy and whether the system is intended for residential or commercial usage. The specialists at Jones PlumbingSeptic Tank Service can assist you in determining the right tank size that complies with local and state specifications.

Landscaping Changes

Because septic systems are installed underground, it is probable that the existing landscaping will need to be removed and replaced. Our professionals, on the other hand, may propose that the new system be installed in a different place in order to minimize interference with plant and tree roots.

The Florida Department of Health mandates that the following distances be respected in order to prevent groundwater pollution from septic systems:

If the property is located more than 75 feet from the annual flood line of a permanent, non-tidal surface water body or from the high water line of a tidal body of water, the following restrictions apply: 15 feet from a dry drainage ditch or stormwater retention area

10 feet from stormwater pipelines
At least 200 feet away from public drinkable wells that are already in use for non-residential or residential structures with a total daily sewage discharge of more than 2,000 gallons
And At least 11 feet away from any water storage tanks that come into touch with potable or groundwater

A minimum of 15 feet away from a groundwater interceptor drain is required
Minimum distances between bays, lakes and surface water
Minimum distances between multi-family wells and/or private potable water wells

And minimum distances between other wells.

New Home ConstructionSeptic Systems

Construction of new dwellings in rural locations or in any area that is not served by a municipal sewer system necessitates the installation of septic systems. Any system installed as part of a new house building project will have to take into consideration the elements and laws outlined above. In addition to establishing septic systems for countless new houses, Jones PlumbingSeptic Tank Service is happy to assist you through the application and permitting process, in addition to properly installing the system.

Homeowner’s Guide to Septic Systems

Septic tanks are a reasonably affordable method of treating sewage generated by a household. The majority of them are intended to endure between 15 and 20 years. Despite this, because they are located underground, it is easy to take them for granted and to put off inspections until something is clearly wrong with the system. By this time, the damage might have spread and necessitated the need for costly repairs. You may reduce the possibility of this occurring to you by being familiar with the fundamentals of septic tank maintenance.

How Septic Tanks Work

Septic tanks are often buried on the surface of the earth in a location close to the dwelling. Wastewater from toilets, kitchen appliances, and washing machines is channeled into the tank through pipes into the tank. Sludge —solid waste that settles to the bottom of the tank—, as well as scum —grease and light solid waste that accumulates on the surface — are broken down by naturally occurring microorganisms over time. The residual wastewater is then sent through a pump or pipe into the drainfield, which has a series of filters and gravel that further purify the water before it is allowed to enter the ground.

Ways to Care for Your System

Here are some practices you may adopt to assist extend the life of your septic tanks in Gainesville.

Be Wise With Water

If you are not currently attempting to save water for environmental and budgetary reasons, you may want to begin doing so for the sake of your septic system’s overall health and well-being. Solids will be forced into the drainfield if there is too much water flowing into the tank before they have had enough time to decay. This might result in blockages, drainfield damage, or groundwater pollution. To avoid overburdening the system, avoid using the dishwasher and washing machines at the same time, spread laundry sessions throughout the week, and wash full loads of clothing whenever possible.

Flush Responsibly

Anything that does not decompose readily or that could be tossed into a garbage can should not be flushed down the toilet. Diapers, paper towels, sanitary napkins, tampons, condoms, unwanted prescriptions, cigarettes, oils, and personal hygiene goods are all examples of what may be recycled.

Keep Accurate Records

Prepare an interior floor plan with a thorough representation of the system’s position and preserve records of maintenance sessions, repairs, and replacements for your personal reference and the reference of future owners.

Perform Annual Inspections

You may get assistance with septic tank cleaning, pumping, and repairs from certified specialists. It is possible for technicians to examine the amounts of solid waste in the tank and assess if it is necessary to pump the trash out. General rule of thumb is that tanks require pumping when either the bottom of the scum layer is within three inches of the bottom of the outlet mechanism that directs the wastewater to the drainfield or when the top of the sludge layer is within twelve inches of the bottom of the outlet device.

Direct Runoff Away From System

Make certain that water from roofs, driveways, patios, and streets does not run into the area where your septic tank and drainfield are located, especially after it rains.

Make Lids Accessible

Install risers in your septic tank to make inspection and pumping visits easier, faster, and less dirty and disrupting to your daily life. Grass is the most effective cover for a tank, but you might also use other plants with shallow roots if you don’t have grass. Avoid covering the tank with concrete, asphalt, or plastic since these materials hinder oxygen from reaching the soil and allowing microorganisms to break down the sewage and decompose it.

What Not to Do

Using a trash disposal can cause solids and grease to accumulate fast, clogging the drainfield and necessitating more frequent pumping of the tank.

Pour Household Chemicals Down The Drain

Extremely strong chemicals used in paints, cleaning supplies, motor oil, insecticides, and cosmetic items can kill the microorganisms that are necessary for decomposition of solid waste inside an aqueous system.

Drain Water From Hot Tubs Or Swimming Pools Into The System

Large amounts of water can completely drown your drainfield, and chlorine can kill vital microorganisms that are present in the drainfield. Instead of emptying the water after using a bathtub, let it to cool and then reuse it to water the grass or for other household duties instead.

Enter The Tank

Poisonous gases and a lack of oxygen are both potentially lethal. Any maintenance on the tank should be performed from the outside. If you want assistance, get expert assistance.

Put Weight And Traffic On The Drainfield

Keep automobiles, porches, storage sheds, sports courts, heavy equipment, and grazing animals off the ground and away from the septic tank and drainfield to avoid clogging the system. This can assist to avoid soil from being compacted and pipelines from breaking as a result of flooding. Make sure to consult with the health department before planting a garden or erecting structures or pools near the septic system to ensure that they are safe.

Signs that Your System Is Struggling

Pay close attention to the plumbing fittings in your house as well as the ground around the tank for symptoms that you may require septic tank repair. These are some examples:

Reverse osmosis (water backed up into sinks, toilets, bathtubs, and washing machines)
A disagreeable odor in or around the house
When water is flowing or toilets are flushed, gurgling sounds can be heard.

Depressions in the earth that are developing
There are some strange puddles and sogginess in several areas. Greener grass that is darker in color over the region of the septic system

Septic Tank Services in Gainesville, FL

Gainesville-based Jones PlumbingSeptic Tank Service offers more than 30 years of expertise providing septic tank services to residents in Gainesville and the surrounding areas. Get in touch with our experts right now for appropriate septic system maintenance that can help your house or company flourish.

Household Products That Will Ruin Your Septic Tank!

Many people who have septic tanks are unaware of what they may and cannot flush down their toilets or down their sinks. It may come as a surprise to find just how delicate septic tanks are, and how many common household goods can cause harm to and/or block your septic tank if you don’t know what you’re doing. By keeping these things out from your drains, you can maintain your septic tank in good shape and avoid costly septic repairs down the road. Chemical Cleaners are a type of cleaning agent that uses chemicals to remove dirt and grime.

You may disturb the bacteria cycle in your septic tank by pouring anti-bacterial cleansers like bleach down your drains and down your toilets.
Additives Several septic tank additives make the promise that they will enhance the amount of bacteria in your septic system.
The Environmental Protection Agency and the American Ground Water Trust, on the other hand, warn that chemical additions may cause more harm than good to your tank.
Using Bath Oils Oil floats to the top of your septic tank, where it congeals and hardens to produce a layer of scum on the surface.
It has the ability to withstand bacterial activity and embed in the solid waste layer.
Grease from the kitchen Grease of any kind contributes to the buildup of scum in your septic tank.
Unless otherwise instructed, you should avoid dumping oil down your sinks.

In addition, dryer papers might jam the entrance baffle.

Over time, the clay will clog your pipes and cause your septic tank to fail completely.

Products Made of Latex The majority of latex-based products are not biodegradable.

If the outlet tee is missing, the latex may clog the drain field on its way out of your septic tank, causing it to back up and choke the tank.

Paints and oils are two types of media.

In order to maintain your soil and groundwater free of diseases, you must have this bacterium on hand.

Prescription medications and chemotherapy medications Even after passing through a patient’s digestive system, powerful medications may still retain active ingredients that are harmful to them.

If possible, avoid allowing drug-contaminated faeces to enter your home’s septic tank.

Some prescription medications have the potential to be harmful to the environment.

Chemicals for Automatic Toilet Cleaning Systems Automatic toilet cleaners release an excessive amount of anti-bacterial chemicals into your septic tank, causing it to overflow.

Instead, choose toilet cleansers that are suitable for septic systems.

Even minute amounts of string, on the other hand, can clog and ruin pump impellers.

In a period of time, it will encircle a pump and cause harm to your septic tank’s mechanical components.

Your tank is only capable of holding a specific amount of domestic water; it cannot accommodate big volumes of water from a pool or roof drain.

Don’t use your sinks or toilets as garbage cans; this is against the law.

Put your trash in the garbage to prevent having to pay extra in pump-out fees.

Young children, on the other hand, may be unable to comprehend how toilets function.

Rather than degrading, the clothing are likely to block your septic tank.

Butts for Cigarettes Cigarette filters have the potential to choke the tank.

For a comprehensive list of potentially dangerous goods, consult your septic tank owner’s handbook or consult with a specialist.

If possible, avoid flushing non-biodegradable goods down the toilet or down the drain. You will save money on costly repairs and you will extend the life of your tank by taking these precautions.

A Beginner’s Guide to Septic Systems

Septic systems are used to dispose of waste from homes and buildings. Identifying the location of the septic tank and drainfield
What a Septic System Is and How It Works Keeping a Septic System in Good Condition
Signs that a septic system is failing include:

Septic systems, also known as on-site wastewater management systems, are installed in a large number of buildings and houses. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to protect human and environmental health due to their burying location. Septic systems are the norm in rural regions, but they may also be found in a lot of metropolitan places, especially in older buildings. It is critical to understand whether or not your building is on a septic system.

Is Your Home or Building on a Septic System?

It is possible that the solution to this question will not be evident. If a structure looks to be connected to a sewage system, it may instead be connected to a septic system. It is fairly unusual for tenants to be unaware of the final destination of the wastewater generated by their residence. Some of the hints or signs listed below will assist in determining whether the facility is served by a septic system or whether it is supplied by a sewer system:

Sewer service will be provided at a cost by the city or municipality. Pay close attention to the water bill to see whether there is a cost labeled “sewer” or “sewer charge” on it. If there is a fee for this service, it is most likely because the facility is connected to a sewage system. Look up and down the street for sewage access ports or manholes, which can be found in any location. If a sewage system runs in front of a property, it is probable that the house is connected to it in some way. Inquire with your neighbors to see if they are connected to a sewer or septic system. The likelihood that your home is on a sewer system is increased if the properties on each side of you are on one as well. Keep in mind, however, that even if a sewage line runs in front of the structure and the nearby residences are connected to a sewer system, your home or building may not be connected to one. If the structure is older than the sewer system, it is possible that it is still on the original septic system. Consult with your local health agency for further information. This agency conducts final inspections of septic systems to ensure that they comply with applicable laws and regulations. There is a possibility that they have an archived record and/or a map of the system and will supply this information upon request

All property owners should be aware of whether or not their property is equipped with an on-site wastewater treatment system. Georgia law mandates that the property owner is responsible for the correct operation of a septic system, as well as any necessary maintenance and repairs.

Locating the Septic Tank and Drainfield

Finding a septic system may be a difficult process. They can be buried anywhere in the yard, including the front, back, and side yards. After a few years, the soil may begin to resemble the surrounding soil, making it impossible to distinguish the system from the surrounding soil. It is possible that in dry weather, the grass will be dryer in the shallow soil over the tank and greener over the drainfield, where the cleansed water will be released, but this is not always the case, especially in hot weather.

The contractor who built the house should have presented the initial owner with a map showing the tank and drainfield locations, according to the building code.
The installation of the system, as well as any modifications made to it, would have been examined by your local health authority.
Unfortunately, if the system is very old, any records related with it may be insufficient or nonexistent, depending on the situation.
Look for the point at where the wastewater pipes join together if the building is on a crawlspace or has an unfinished basement.
The sewer line that runs through the structure is referred to as the building sewer.
To “feel” for the tank, use a piece of re-bar or a similar metal probe.
If you use this free service, you may avoid accidentally putting a rod through your gas or water line.

Try to locate the tank after a rainstorm, when the metal probe will be more easily maneuvered through moist dirt.

This should be done with care; extreme caution should be exercised to avoid puncturing the building sewer.

A tank is normally 5 by 8 feet in size, however the dimensions might vary.

Be aware that there may be rocks, pipes, and other debris in the area that “feels” like the tank but is not in fact part of the tank.

However, it is possible to have the lid or access port positioned on a riser in addition to being on the same level as the top of the tank in some cases.

Once the tank has been identified, make a rough drawing of its placement in relation to the house so that it will not be misplaced again!

It may be easier to discover the drainage lines now that the tank has been identified, particularly if the area has been subjected to prolonged periods of drought.

How a Septic System Works

Typical sewage treatment system (figure 1). It is composed of three components (Figure 1): the tank, the drain lines or discharge lines, and the soil treatment area (also known as the soil treatment area) (sometimes called a drainfield or leach field). The size of the tank varies according to the size of the structure. The normal home (three bedrooms, two bathrooms) will often include a 1,000-gallon water storage tank on the premises. Older tanks may only have one chamber, however newer tanks must have two chambers.

The tank functions by settling waste and allowing it to be digested by microbes.
These layers include the bottom sludge layer, the top scum layer, and a “clear” zone in the center.
A typical septic tank is seen in Figure 2.
It is fortunate that many of the bacteria involved are found in high concentrations in the human gastrointestinal tract.
Although the bacteria may break down some of the stuff in the sludge, they are unable to break down all of it, which is why septic tanks must be cleaned out every three to seven years.
In addition, when new water is introduced into the septic tank, an equal volume of water is pushed out the discharge lines and onto the drainfield.
The water trickles out of the perforated drain pipes, down through a layer of gravel, and into the soil below the surface (Figure 3).
A typical drainfield may be found here.
Plants, bacteria, fungus, protozoa, and other microorganisms, as well as bigger critters such as mites, earthworms, and insects, flourish in soil.
Mineralogical and metallic elements attach to soil particles, allowing them to be removed from the waste water.

Maintaining a Septic System

The most typical reason for a septic system to fail is a lack of proper maintenance. Septic systems that are failing are expensive to repair or replace, and the expense of repairs rests on the shoulders of the property owner (Figure 4). Fortunately, keeping your septic system in good working order and avoiding costly repairs is rather simple. Figure 4. Septic system failure is frequently caused by a lack of proper maintenance. It is in your best interests to be aware of the location of the system, how it operates, and how to maintain it.

You should pump the tank if you aren’t sure when the last time it was pumped.
It is not permissible to drive or park over the tank or drainage field.
No rubbish should be disposed of in the sink or the toilet.
It’s important to remember that garbage disposals enhance the requirement for regular pumping.
When designing a landscape, keep the septic system in mind.
It is also not recommended to consume veggies that have been cultivated above drainfield lines (see Dorn, S.
Ornamental Plantings on Septic Drainfields.

C 1030).

Any water that enters your home through a drain or toilet eventually ends up in your septic system.

Don’t put too much strain on the system by consuming a large amount of water in a short period of time.

Additives should not be used.

Various types of additives are available for purchase as treatment options, cleansers, restorers, rejuvenator and boosters, among other things.

To break up oil and grease and unclog drains, chemical additives are available for purchase.

Pumping out the septic tank is not eliminated or reduced by using one of these systems.

They remain floating in the water and travel into the drainfield, where they may block the pipes. Acids have the potential to damage concrete storage tanks and distribution boxes.

Signs a Septic System is Failing

A failed system manifests itself in the following ways:

Sinks and toilets drain at a snail’s pace
Plumbing that is backed up
The sound of gurgling emanating from the plumbing system House or yard aromas that smell like sewage
In the yard, there is wet or squishy dirt
Water that is gray in hue that has accumulated
An region of the yard where the grass is growing more quickly and is becoming greener
Water contaminated by bacteria from a well

If you notice any of these indicators, you should notify your local health department immediately. An environmentalist from the health department can assist in identifying possible hazards. There are also listings of state-certified contractors available from the local health department, who may do repairs. Repairs or alterations to the system must be approved by the health department and examined by an inspector. Keep an eye out for any meetings that may take place between a health department inspector and a contractor to discuss repairs to your system.

Household garbage that has not been properly handled is released into the environment when systems fail.
It has the potential to pollute surrounding wells, groundwater, streams, and other sources of potable water, among other things.
The foul odor emanating from a malfunctioning system can cause property values to plummet.
Briefly stated, broken systems can have an impact on your family, neighbors, community, and the environment.
Septic systems are an effective, attractive, and reasonably priced method of treating and disposing of wastewater.

Figures 2 and 3 reprinted with permission from: CIDWT. 2009. Installation of Wastewater Treatment Systems. Consortium of Institutes for Decentralized Wastewater Treatment. Iowa State University, Midwest Plan Service. Ames, IA.

History of the current status and revisions Published on the 15th of August, 2013. Published on March 28th, 2017 with a full review.