Your septic system uses a concrete lid to prevent odors and sewage from seeping into the ground. The lid requires removal every five years to have the septic system pumped out and the tank cleaned. Concrete septic tank covers require replacement when they develop cracks or other damage.
- The number one reason why replacing the lid becomes necessary is because the one covering the tank has been damaged. Many homeowners are unaware of how susceptible to damage septic tank lids are. Driving over the lid as you move your car into your garage can cause cracks to form.
Do septic tanks need lids?
In most cases, all components of the septic tank including the lid are buried between 4 inches and 4 feet underground. Unless the septic tank has special risers that position the lid at ground level, you’ll have to dig for it.
How much does it cost to replace a lid on a septic tank?
Over time, concrete covers may crack, and steel lids may rust. You can typically replace a septic tank lid on your own for $35 to $60.
What causes a septic tank lid to crack?
Cracks in the lid are most common. These can develop because of pressure on top of the lid, such as when a car or tractor drives over the tank. Cracks in lids are fairly easy to fix. Concrete filler is added to the crack and allowed to cure.
Can you replace the top of a septic tank?
If it is not rusted, you can replace the rusted top with a heavy-duty plastic or concrete lid. Concrete septic tank covers are heavy but strong and durable. Plastic covers offer faster access to the septic tank and are much easier to install.
Do old septic tanks have lids?
If your septic tank was installed after 1975, it will probably have two polyethylene or fiberglass lids centered at opposite sides of the perimeter. Older tanks will typically have a 24-inch concrete lid right in the center of the tank. Excavate in those locations to reveal the lids.
Do septic tanks have concrete lids?
Septic systems are an inexpensive and frequently viable option for sewer systems. The most common tanks, starting in the 1940s, are concrete, with 3 – 500# lids for a 1000 gallon tank or 4 – 500# lids for a 1500 gallon tank.
How often does a septic tank need replacing?
Typical lifespan is in excess of 30 years for GRP, PE and concrete tanks. Assuming optimal conditions of install and use, you could expect the following: Steel septic tanks have a life expectancy of 15 to 20 years.
How can you tell if a septic tank collapse?
Here are the signs your septic system’s got an issue and it’s time to call in the pros.
- Water (or sewage) is backing up inside your home.
- Green, spongy grass around your septic tank.
- You’ve got trees or shrubs near your system.
- Water’s pooling in your yard.
- A rotten egg smell.
- Slow drains.
What is the life expectancy of a concrete septic tank?
Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.
Do concrete septic tanks collapse?
However, no matter how well-built, septic tank problems do occur. Issues may arise in older septic systems, but tanks can also fail prematurely and collapse for several reasons. Above-ground pressure– Placing too much weight over your septic tanks is never advisable, as they’re not designed to be load-bearing.
How many lids should a concrete septic tank have?
Two or three lids may be included in your system. The average size of a sewage tank is approximately 5 feet by 8 feet. The lid is buried between 4 inches and 4 feet underground in most cases.
How do you lift a septic tank lid?
Some tank lids have built-in handles to pull on, but others require a pry bar to lift them open. If the lid comes with handles, ask for the assistance of a friend or family member to remove the lid. If it doesn’t, push a screwdriver into the seam around the lid and insert the pry bar into the gap. Then, press down.
What happens if septic tank is cracked?
Septic Tank Integrity A crack in the tank can cause failure of the entire system, allowing contaminants to be released to the immediate surrounding soil.
Septic tank concrete lid replacement 2021 (Guide)
Replacement of the concrete cover of a septic tank. A concrete cover keeps smells out of your sewage tank and prevents sewage from leaking into the ground. Every five years, the lid must be lifted in order for the septic system to be emptied and the tank to be cleaned. When concrete septic tank covers develop cracks or other signs of degradation, they must be removed and replaced with new ones. These may be purchased either online or through a local home improvement store. Because of risers, the lids of many septic tanks may be seen above ground in some cases.
Before excavating to replace a cement septic cover, contact the utility companies to have them bring out and mark the location of electricity and water lines in the area.
Septic tank concrete lid replacement
Although the septic tank lid appears to be little, it is one of the most important components of the system. It is possible that an insufficient seal around the tank’s entry will enable smells to escape and/or allow foreign objects to enter and perhaps clog the system. As a result, you must replace this lid on a regular basis. Read our guide to find a solution to your problem.
Dig Down to the septic Lid
Remove the concrete septic lid from around it with a spade and shovel until you reach the septic tank’s cover. It is common for a septic tank to be 12 to 14 inches below the surface of the earth. Excavate a 16-inch-wide circle around the septic tank to provide yourself enough space to work when removing the sewage tank lid from the septic tank. Digging 2 inches past the seam of the tank’s lid is also a good idea. If your lid is on a riser, there is no need to investigate further.
Lift Of Lid
Place a pry bar between both the septic tank’s top and the lid. Request that your assistant maintains the lid’s latch. To lift one end of the concrete septic tank lid, press down just on the pry bar. Solicit assistance in pulling the lid handle and sliding the top to the side. Repeat the prying-up method for the extreme side of the lid if it’s a vast rectangular lid. With the help of your helpers, lift the cover of the septic tank. It may be necessary to enlist the assistance of more than one person, based on the size of the lid.
Replace the seal with a new one if it has cracks or tears when reinstalling the lid.
Measure the Lid
Determine the length and breadth of the opening to your septic tank using a measuring tape or other similar instrument. Purchase a replacement sewer cover from Home Depot or another supplier depending on the dimensions you have taken before. Even if your lid doesn’t arrive for a couple of days, you may either cover the septic tank again with the previous lid or cover the tank entrance with a tarp until it does arrive.
Clean The Seal
Determine the length and breadth of your septic tank entrance using a measuring tape or other similar tool.
Home Depot or another store can help you choose a replacement sewer cover that fits your specifications. You may either cover the septic tank with the previous lid or use a tarp to cover the tank entrance if your lid won’t come for many days.
Install the new lid
While you are lifting one end of the new septic tank lid, your assistant should be lifting the other end. Lower the concrete lid over a septic tank with care, making sure that the seal between the tank and the lid has been crushed as much as possible. If you have to dig to get to the septic tank, make sure you cover it completely with soil. According to the manufacturer’s instructions, you should be able to remove PVC or polyethylene lids by yourself or with the assistance of a second person.
This makes it simple to attach the lid to a tank.
Septic tank concrete lid replacement cost
Lid for a septic tank. Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. It is somewhat more expensive to have it changed by a professional.
Conclusion
The septic tank lid may be little, but it is one of the most important components of the entire system. A poor seal around the entryway will allow smells and other items to penetrate the tanks, potentially causing the mechanism to get clogged and malfunction. Guides that are related
- What is the best way to clean a septic tank naturally? I recently had my septic tank emptied and refilled. Consumer reports on the best bathroom fans
How much should replacing septic tank lids cost, and what is involved?
This is going to be dependent on the type of lids required by the manhole material as well as local codes to a certain extent. For example, in our neighborhood, both concrete manhole covers and bolted-down plastic manhole covers are permissible. In light of the foregoing, if it is simply the lid that need replacement, it shouldn’t be prohibitively expensive in any case. For example, I just upgraded my system by adding a pump tank and a raised drain field. The tanks that were installed had plastic corrugated manholes, and I decided for plastic lids instead of metal ones to save money (the manhole can then be brought down to ground level, and you can mow right over the lid).
Simply put, they employ a 6″ lag screw that is screwed into the plastic manhole cover (if it is a matter of simply replacing existing plastic lids, you can probably do it yourself).
It is impossible for me to say how much the old steel lids cost, although I would think that they are somewhat more expensive.
If the existing lids are made of plastic, just remove the lag screw, take the old lid off, replace it with the new one, and screw the lag screw back in place.
To replace a concrete lid, just dig it out of the ground (ours was only a couple of inches below ground, save for the PVC pump tube), lift the handles, pull off the old lid, and replace it with the new lid. Put the dirt/sod back on top of the pile.
How to Replace a Septic Tank Lid
Despite the fact that the lid of your septic tank appears inconsequential, it is actually one of the most crucial components of the system. An improperly sealed tank will enable smells to seep out while also allowing foreign things to enter the tank, which can create clogging of the system. As a result, it is critical that you change this lid on a frequent basis.
Step 1 – Find the Septic Tank
In order to remove and replace the lid of the septic tank, search for and locate it. This can often be more difficult than it appears, particularly if you have a large property to manage. To begin, choose the simplest route possible by contacting local tank pumpers, previous homeowners, or the health agency in your neighborhood. They may be able to provide you with information on the location of your septic tank, which can save you a great deal of time and effort searching for it. It may be necessary to locate the sewage outflow from your home if the simple method does not work.
As soon as your basement is done, climb up to the roof and locate the vent that permits sewage gases to escape into the atmosphere.
Examine the grass in a square 10 to 20 feet outside of where the pipe exits, where it appears to be greener and healthier than the surrounding area.
If the septic tank lid is above ground level, as is frequently the case, there is no need for excavation.
Step 2 – Determine the Type of Replacement Lid Required
In order to remove and replace the lid of the septic tank, search for and locate it. This can often be more difficult than it appears, particularly if you have a large property to manage. To begin, choose the simplest route possible by contacting local tank pumpers, previous homeowners, or the health agency in your neighborhood. They may be able to provide you with information on the location of your septic tank, which can save you a great deal of time and effort searching for it. It may be necessary to locate the sewage outflow from your home if the simple method does not work.
As soon as your basement is done, climb up to the roof and locate the vent that permits sewage gases to escape into the atmosphere.
Examine the grass in a square 10 to 20 feet outside of where the pipe exits, where it appears to be greener and healthier than the surrounding area.
If the septic tank lid is above ground level, as is frequently the case, there is no need for excavation. Remove any longer grass or trash from the section of greener grass where the lid is located by simply walking over to it.
Step 3 – Remove and Replace the Lid
In order to remove and replace the lid of the septic tank, search for and locate it. This can often be more difficult than it appears, particularly if you have a large property to manage. To begin, choose the simplest route possible by contacting local tank pumpers, previous homeowners, or the health agency in your neighborhood. They may be able to provide you with information on the location of your septic tank, which can save you a great deal of time and effort searching for it. It may be necessary to locate the sewage outflow from your home if the simple method does not work.
As soon as your basement is done, climb up to the roof and locate the vent that permits sewage gases to escape into the atmosphere.
Examine the grass in a square 10 to 20 feet outside of where the pipe exits, where it appears to be greener and healthier than the surrounding area.
If the septic tank lid is above ground level, as is frequently the case, there is no need for excavation.
Replacing Your Septic Tank Access Cover
The entrance cover for your septic system may appear to be an inconsequential element of the jigsaw, but it is critical to keeping your waste confined. Therefore, it is critical to understand when, why, and how you should replace your septic tank access cover in order to avoid costly repairs. Let’s take a deeper look at what’s going on.
When Should You Replace Your Septic Tank Access Cover?
Septic tank lids serve two functions: they prevent sewage from spilling into the tank and they prevent objects from falling into the tank. They are made of plastic or metal. Because the access cover for your septic tank is visible, it is critical that your septic tank lid be solid, durable, and correctly affixed to the tank, especially if your tank is on risers. Small animals and even children can become entangled if this is not prevented. As an added precautionary measure, leaks or breaks in the lid of your septic tank can cause an overflow of wastewater or sewage onto your yard, posing health dangers and creating an unsightly messe.
Additionally, bear in mind that your tank may be overflowing as a result of an overdue pumping session.
How to Replace Your Septic Tank Access Cover
So, how do you go about replacing a septic tank lid that has damaged or is leaking? Take the actions outlined below.
Locate your septic tank lid.
If your septic tank’s lid is on risers or if you have already had your septic tank pumped, this step is straightforward because you already know where your septic tank is located. When it comes to finding your septic tank if it is buried someplace in your yard and cannot be discovered, the task becomes a little more difficult to do. First, try contacting the folks who previously owned the land where you live. If you can’t get in touch with them, you might look for your property’s papers at the local health department.
You may either use a metal detector (and hope that the lid is made of metal!) or track the drain pipes that go away from your house if none of the other methods are successful.
Wait for the trail to come to an end, then probe about until you come upon the septic tank cover.
If all else fails, you might consider hiring a professional to assist you in locating your septic tank. Fortunately, you only have to go through this process once! Just make sure to indicate the location beforehand.
Determine what type of access cover you need for the replacement.
Always keep in mind that septic tank lids are available in a number of materials, which means that they vary in terms of both durability and cost. Despite the fact that concrete is reasonably inexpensive and surely durable, it is difficult to remove for routine maintenance and septic tank pumping. PVC or polyethylene covers, on the other hand, are more expensive, but they offer a greater degree of ease. Lids made of metal or fiberglass are also available. In addition to personal preferences, consider variables such as the placement of the septic tank, the amount of weight that will be placed on it, and so on.
Measure the current access cover.
Be sure to carefully measure the previous lid before making your final purchase to guarantee that you obtain the right size lid. The majority of lids are between 21″ and 25″ in height.
If the lid is not on risers, use a shovel to dig around it.
Remove the soil from the top of the septic tank and use a shovel to loosen the corners of the lid so that you can easily remove it. Remove the soil from the bottom of the septic tank.
Lift the old lid off the tank.
This phase might be simple or complex, depending on the sort of lid you’re working with. For a heavier lid, such as one constructed of concrete, you will almost certainly want the assistance of another pair of hands. If the lid is constructed of a lighter material with fasteners, carefully remove the bindings and pull it out of the way. Make sure that any children or pets are kept inside throughout the replacement procedure to avoid anyone falling in during the operation. Watch your own feet, as well.
Install the new one using the existing fasteners.
Once you have removed the old, leaking lid, carefully replace it with the new one, making sure that it is aligned with the rest of the container and that it fits tightly.
Re-bury the lid, or ensure its security if it is on risers.
Once you’re finished, either set the soil back on top of the lid or tighten the cover to ensure it’s snug and secure.
How Can Norway Septic Help?
Located in Norway, Indiana, Norway Septic Inc. is a customer-focused company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to homes and business owners in the Michiana area. We take great delight in finishing the task that others have left unfinished. For more information on purchasing a new effluent filter or scheduling a septic tank cleaning with one of our specialists, please contact us right now.
Best Septic Tank Risers & Lid Replacements ⋆
Lawn mowers and other lawn and garden devices can cause significant damage to septic tank risers and lids, which can result in costly repairs. Although most sewage tank risers and lids were formerly made of exceptionally durable concrete, green plastic is now being used as a less expensive and easier to install alternative to concrete in most cases. Sewage lid security is vital because it stops animals from accessing the septic system and also helps to avoid accidents from occurring. The sewer covers also protect the septic grinder pump, filter, and other mechanical components from damage caused by the weather, including hail, ultraviolet radiation, floods, and other elements.
When selecting a septic riser or lid, it is critical to consider durability, ultraviolet (UV) protection, and weather resistance. A few of the greatest solutions for both new installs and replacements are included in the selections mentioned below.
Top Rated Septic Tank LidsRisers
1. Polylok 3008-RC Riser with a 24′′ diameter. It is necessary to utilize this product in conjunction with Polylok 3008 or 3008-R12 risers. The high-density polyethylene (HDPE) construction allows it to survive the severe climate found within the septic tank. Gaskets have been put on the lid to improve the overall quality. Because certain of the chemical components in the product are known to create cancer-related hazards, you should exercise caution when handling it. This model also has the following features:
- The use of HDPE in the design is beneficial. Installed to improve the overall quality
- Installation is quick and simple. Simple to clean and keep up to date
(We give it a 5 out of 5) GET THE LOWEST PRICE! Tuf-Tite 24′′ Domed Lid (optional). The lid is only compatible with Tuf-Tite risers that are 24 inches in height. It comes with gaskets that are built in and are completely waterproof. Easy to align in the preferred manner, and it will always provide the finest line up possible. The product’s design assures that it will last for a lengthy amount of time. This model also has the following features:
- It has a watertight cover, built-in gaskets, is simple to install, and is the best design available.
Our score is a (4/5) GET THE LOWEST PRICE! 3. Tuf-Tite Heavy Duty Lid (24′′ Diameter) The outside diameter of the lid is 25 inches, while the internal diameter is 24 inches. Tuf-Tite products, as well as corrugated pipes, are excellent candidates for this product. As a result, the top will not fit atop a septic tank, as previously stated. It is completely waterproof, and there is no O-ring fighting. This model also has the following features:
- Corrugated pipes are an excellent choice. It has a watertight seal
- There is no O-ring fighting
- It is simple to maintain.
Our Score: (4.5 out of 5) GET THE LOWEST PRICE! 4. Polylok 3008-HD24 (high-density polyethylene). Lid with a lot of strength The cover is designed to fit any 24′′ ribbed or corrugated pipe with ease. The cover is made of a robust material that is both airtight and waterproof. Aside from that, it boasts one of the most comprehensive UV packages available on the market. Because of its HDPE construction, it is resistant to the extreme weather conditions seen in the septic environment. This raises the level of protection you have.
- Compatible with ribbed pipe
- The strongest and most lasting
- Resistant to adverse weather conditions
- Increases your safety
(We give it a 5 out of 5) GET THE LOWEST PRICE! Jackel Riser Cover (number 5) This cover is ideal for 18′′ diameter riser pipes, whether they are made of PVC, double wall polyethylene, or single wall polyethylene. It is available in a green hue, which allows it to blend in with the surrounding environment. It’s long-lasting, lightweight, waterproof, and replaceable in the event of a failure. This model also has the following features:
- The most suitable option for polyethylene pipes
- It has a green hue to it. It is both long-lasting and lightweight. It is simple to replace
Our score is a (4/5) GET THE LOWEST PRICE! Septic Tank Risers of the Highest Quality If you’re looking to purchase septic tank risers, the following are the top five options available to you. 1. A total of 24 x 12 Tuf-Tite Risers The product has a diameter of 24 inches and a height of 12 inches. The screws used in the cosmetics are made of stainless steel, which increases your safety. It is available in a green tint that blends in well with the surrounding surroundings.
The pattern is available in four different diameters: 24 inches, 20 inches, 16 inches, and 12 inches. The HDPE construction also makes it more resistant to the severe conditions of a septic system. This model also has the following features:
- 24′′ in diameter and 12′′ in height
- Stainless steel is used in its construction. It is available in the color green. Available in four different diameters: 24 inches, 20 inches, 16 inches, and 12 inches.
(We give it a 5 out of 5) GET THE LOWEST PRICE! 2. AS-R23 Riser Kit (included). It’s the new industry standard design for the time being. In addition to the safety obstacles, a sealant, a protective cover, and the installation instructions are included. The given item is complete and ready to be installed. Because of its design, the Aero-Stream Remediator can be installed in less time and with less difficulty. This model also has the following features:
- New standard design
- A variety of safety obstacles
- And a new standard design. Prepared for installation
- Design makes things more efficient and easy
Our score is a (4/5) GET THE LOWEST PRICE! 3. Riser Kit for the AS-R32 The AS-R32 Riser Kit is an enhanced version of the AS-R23 Riser Kit. It is delivered with a plastic adaptor that is 29′′ x 29′′ in size. It is pre-configured for direct installation, and its installation makes the installation of Aero-Stream Remediator more efficient and straightforward. It also includes a comprehensive set of installation instructions. This model also has the following features:
- This item comes with a plastic adaptor. The item measures 29′′ x 29′′. Installation without a hitch
- Installation makes the process more efficient and straightforward.
(We give it a 5 out of 5) GET THE LOWEST PRICE! 4. Tuf-Tite 20′′ x 12′′ Riser (optional). The Riser is 12 inches in height and 20 inches in diameter. It is suited for use with septic tanks, and the stainless steel screws used in its construction boost its overall efficiency. It is available in four different diameters: 24 inches, 20 inches, 16 feet, and 12 inches. It is available in a green tint that blends in wonderfully with the surroundings. This model also has the following features:
- Septic tanks are suitable for use. Available in 24′′, 20′′, 16′, and 12′′ diameters
- Green in color
- Completely fits
Our score is a (4/5) GET THE LOWEST PRICE! 5. As-R07 Riser Kit (optional). The product has a diameter of 24 inches and a height of 7 inches. It is sent fully assembled, with an instruction manual included for your convenience. Its setup makes it simple to install Aero-Stream Remediator more quickly and easily than ever before. This model also has the following features:
- It has a diameter of 24 inches and a height of 7 inches. Finished and ready to be installed
- Please see the attachment for the instruction manual. Installation makes the process more efficient and straightforward.
Our Score: (4.5 out of 5) GET THE LOWEST PRICE! In order to maintain environmental cleanliness and human health, septic tanks are essential. They assist in the disposal of human waste, which, if not managed properly, can result in a variety of ailments. Every septic tank requires a riser and a lid in order to function properly. If you’re thinking of purchasing one, have a look at the information in this post to ensure that you make an informed decision. What is a septic tank riser and how does it work?
- When it comes to the new models, it is a collective advancement, but the earlier designs are missed opportunities.
- As a result, the cleaning firm will not be required to dig into the ground in order to reach the storage tank.
- A septic tank lid is a cover that is used to shut the top of the tank riser.
- The cleanout business installs it at the top of the riser so that it may be used to determine the tank’s perimeter.
- Reasons for the need for a replacement You will eventually need to repair both the septic tank riser and the septic tank lid.
- The lid or the riser may also need to be replaced if you decide to rebuild your septic tank from scratch.
- In most cases, replacing the top will cost you roughly $70, while replacing the riser will cost you at least $150.
- The following are some of the most effective septic tank riserslid replacement options to consider.
- Keeping your septic tank in excellent working order is a good habit to get into.
- Consequently, it’s critical that you inspect the walls, the riser, and the lid for any fractures that may exist before proceeding.
If there are any indicators, you should consider having them replaced as soon as possible. SummaryReviewer Jack Ryan is a fictional character created by author Jack Ryan. Item was reviewed on the date specified in the review. Septic Tanks RisersAuthor Rating5 out of 5 stars
Septic Tank Risers, Lids, and Covers
The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.
- Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
- ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.
- No.
- Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
- It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.
- IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
- If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
- Yes.
- IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS?
- The Polylok Septic Tank Risers are supplied with screws to allow them to be connected to one another.
THE POLYLOK SEPTIC TANK RISER ADVANTAGE
Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:
INTERNAL STRUCTURAL RIBS
The Polylok risers are reinforced with structural ribs that run internally around each riser segment, providing them with exceptional strength and allowing them to maintain their shape even after the hole is backfilled with dirt. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.
Because the Polylok products are fully smooth on the outside, they will not cause any problems in frosty environments!
LOW PROFILE RISER LIDS WITH HANDLES
The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.
LARGE TANK ADAPTER RING
It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!
SCREWS INCLUDED
At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.
Septic Tank Lid Safety
Accidental falls into septic tanks do happen from time to time. The majority of the time, the individual who falls in is able to come out without suffering any significant injuries. However, the terrible loss of a kid serves as a warning to check your septic system for broken or missing lids. To ensure that no one is accidentally thrown into your septic tank, follow these safety procedures.
- Understand where the lids or coverings for your septic system are situated
- Check the condition of the lids on a regular basis for any risks or difficulties. Maintain the integrity of the lids by repairing or replacing any broken or missing pieces
- Bolts, screws, or other locks can be used to fasten the lids and prevent unauthorized entry. Never drive or park a vehicle on top of a septic system since this might cause damage or dislodge the lid. When examining or having your septic system pumped, never leave the lid open while you are working on it. After you’ve finished working on your septic system, check to see that the lids are securely fastened. Children should be taught that septic tank lids should not be played with or opened.
Owners of septic systems are responsible for ensuring that their systems are safe and correctly function, which includes keeping the tanks’ lids securely closed at all times.
Finding Your Septic System
If you are unable to locate the septic tank’s entrance, you should call your local health department. Most likely, they’ve given permits for the system, which may have included a map showing where the septic tank is located. The local health agency may not have a record of the tank; if this is the case, consult with a professional septic system firm, which has expertise discovering difficult-to-find tanks. Furthermore, because many systems are totally underground, it is possible that your system will not have lids at the surface.
More Resources
- Septic System 101: The Fundamentals of Septic Systems
- Taking Good Care of Your Septic System
- A video on how to inspect your septic system yourself
- Using the Services of a Septic System Professional
- Symptoms of a Failing Septic System
Repairing and Replacing Septic Tank Covers
Septic tank covers are critical to the health of your septic system as well as the safety of those who live or work in close proximity to the tank. Call (404) 998-8812 right now. Repairing and Replacing Septic Tank Covers” data-image-caption=”Repairing and Replacing Septic Tank Covers” data-medium-file=” data-large-file=” data-small-file=” Septic tank covers are critical to the health of your septic system as well as the safety of those who live or work in close proximity to the tank.
It is critical to ensure that septic tank covers are properly installed and that they are structurally sound. If you’re having problems with your septic tank covers, give Atlanta Septic Tank Pros a call for an estimate on repairs or replacements now.
Septic Tank Covers are Imperative
Because septic tank lids are buried in the ground for the majority of the time, it’s easy to forget that they’re doing their jobs down below. The lid performs a couple of functions. First, it protects the contents. First and foremost, it keeps debris out of the tank, allowing the wastewater being handled within to continue to be processed properly. For the second time, they keep people and animals away from the aquarium. It is undeniably possible that a fall into the tank may result in significant damage, and possibly even death.
The Integrity of Septic Tank Covers Varies
Cement septic tank lids are incredibly heavy since they are built of large amounts of cement. When you bring in a professional to assist you with a lid, it is virtually inevitable that special equipment will be required to raise the lid off your shoulders. Other more recent versions may be removed with the assistance of two persons. The strength of septic tank lids cannot be determined just by looking at or measuring them, which is one of the reasons why it is so critical to safeguard them and guarantee that no vehicles are driven over the septic tank system at any time.
Get Help Repairing or Replacing Your Septic Tank Lid
In light of the apparent health and safety risks associated with septic tank covers, it is imperative that you get yours checked by an expert if it becomes cracked or damaged. Sometimes it is possible to fix a lid, but if the damage is severe enough that you are considering replacing the lid, it is a good idea to have the entire system inspected first. A high possibility exists that if the septic tank lid is destroyed as a result of an external force, damage will also occur to the tank itself.
If the septic tank fails as a result of deterioration, the remainder of the system may also need to be replaced as a result of deterioration.
Be Safe if Your Septic Tank Lid is Broken
If the lid is no longer functional or structurally sound, mark off the affected area as soon as possible. Place caution tape around it and make sure that children and pets are not allowed in the area. Do not attempt to make your own top from scratch. Anything available on the market today has been thoroughly tested to ensure that it will withstand the force of dirt being piled on top of it as well as the weight of people walking across it. Once the area has been secured, a professional should be called in.
Let Atlanta Septic Tank Pros Assist You
The professionals at our partner companies can assist you with anything from a simple quote on repairs to replacing your septic tank cover to completely replacing the tank. To make an appointment, call (404) 998-8812 now.
How to Repair a Septic Tank Lid
Septic tanks are available in a variety of materials, forms, and configurations, but they always work in the same way in terms of functionality. Older tanks are made of metal and must be replaced if corrosion begins to develop.
Tanks constructed of concrete or fiberglass, with access covers or risers with lids for inspection, are more recent developments. Repairing a lid is more cost efficient than acquiring a new one, regardless of the configuration or material used.
Step 1
Debris should be removed from the damaged region of the concrete lid. Using a wire brush, rough up the surface of the region. This enhances the surface of the concrete, allowing for greater adherence of the fresh concrete.
Step 2
In a wheelbarrow, mix enough concrete to completely fix the lid in a single batch. Instead of using a water hose to fill the wheelbarrow after emptying the quickrete sack, use a pitcher or pail to fill the wheelbarrow. When utilizing a water hose, it is simple to over-wet the concrete, resulting in it being overly soupy and eventually weak. Continue to mix until the concrete resembles a thick muck.
Step 3
Using a broad trowel, apply concrete mix to the damaged region of the tank lid. Fill the space until it is completely leveled, then shape the concrete using a trowel. Allow for a 24-hour curing period before attempting to move the tank cover.
Step 1
To repair the septic tank, first remove the fiberglass cap and then cover the hole with a huge sheet of plywood. Mineral spirits or paint thinner should be used to thoroughly clean the fiberglass lid in order to remove any dirt, grease, and build-up. Once the lid has been cleaned, it should be dried with an old towel or shop rags.
Step 2
Using a pair of household scissors, cut the fiberglass cloth to size. Overlap the fabric so that it extends at least two inches past the damaged area. As soon as the fabric has been cut to size, place it on a clean surface to dry.
Step 3
Using a plumber’s strap, secure any split places on the tank lid with a screwdriver. Self-tapping screws operated by an electric drill will be sufficient for this application. If you can keep a section of the lid that has been split in half immobile, the resin will cure more evenly.
Step 4
Before pouring a little quantity of resin into a container, shake the can of resin for approximately one minute. Apply liquid resin to the repair area of the lid with an old paintbrush. Remove the brush after each use. Allow for the over-sized fiberglass fabric by spreading the resin a couple of inches beyond the area of the damaged fiberglass cloth. Using the fiberglass cloth, place it on top of the tank cover. Move it into position so that it completely encircles the area of damage. Remove any air bubbles or wrinkles from the fiberglass cloth with a paintbrush before applying a thick top layer of resin using a paintbrush to the surface.
Step 5
Apply a thick topcoat of resin and allow it to set for 24 hours before painting over it. When the curing process is complete, remove the temporary plywood cover from the septic tank and replace it with the fiberglass lid.
Tip
Allow for ample curing of the concrete before laying it on top of the septic tank. When dealing with fiberglass resin, latex gloves should be used.
Warning
If the hole in the septic tank is large enough for a pet or child to slip into, do not leave the tank exposed.
How to Repair the Top of a Rusted Septic Tank
Steel septic tanks were designed to be strong, but even the most durable man-made metals, such as stainless steel, can rust out after 15 or 20 years of use. Most of the time, rust accumulates near the bottom of an uncoated steel septic tank; when it does develop at the top of a tank, it is usually restricted to the tank lid.
A rusted-out steel septic tank lid may be repaired with a very affordable replacement; however, a rusty septic tank should be completely removed and replaced with new steel. Septic tanks that are entirely rusted out should be replaced as soon after they get corroded.
Step 1
The contours of your septic tank should be visible. You should be able to obtain a copy of the blueprints from your local town clerk’s office, as the office is most likely responsible for issuing the septic system permit.
Step 2
Remove the sod that has been covering the septic tank. Make a visual inspection of the tank’s top for evidence of corrosion. Tank replacement is recommended if the corroded area on top of the tank is visible. The earth over the top of a rusted-out septic tank has the potential to collapse, providing a threat to anybody who walks on it. If there is no rust on the tank’s surface, the sod should be replaced.
Step 3
Remove the cover and examine the riser, which is the section of the tank that holds the lid. If necessary, replace the cover. It is possible to replace the rusty top with a heavy-duty plastic or concrete cover if it has not rusted through. By measuring the diameter of the entrance, you can determine the proper size. Concrete septic tank covers are hefty, but they are also sturdy and long-lasting. Plastic coverings allow for quicker access to the septic tank and are far less difficult to install.
Step 4
If a riser of adequate size is required, it should be installed. The riser is designed to fit over the hole in the septic tank that was previously occupied by the riser and lid. For future reference, the riser should protrude at least one foot above the ground surface to allow you to establish its placement.
Step 5
If caulk is required between the septic tank and the riser, it should be used. Allow the caulk to cure for at least 24 hours. Replace the old lid on top of the new one. In order to prevent runoff from entering the septic tank, make sure that it is firmly fastened.
Tip
Make certain that the replacement cover fits securely over the tank in order to prevent runoff from entering the container.
Warning
Before you begin working around your tank, get it pumped. The tank may hold enormous levels of methane, which may be both combustible and dangerous when released into the atmosphere.
