- Because septic tanks are buried underground, locating and accessing tank lids for inspection and pumping can be a potentially difficult, time-consuming, and costly endeavor. Fortunately, the simple addition of a septic tank riser provides an easy, cost-effective solution to this problem that will provide long-term savings.
How much does it cost to install risers on a septic?
Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.
Are septic risers worth it?
Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.
What is the most expensive part of a septic system?
The leach field is the most important part of a properly functioning septic system. It is also the most expensive part of the septic system cost. It is easy to damage and expensive to replace.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
Do they make square risers for septic tanks?
The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.
Should septic tank riser be above ground?
Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.
Should I bury my septic tank lid?
A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank.
How can I tell my septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
What is the cheapest septic system?
Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
How long do septic systems last?
The material of the septic tank – plastic or concrete tanks can last for nearly 40 years. While the steel tank lasts for 15-20 years. Other factors like water usage, trees or plants growing in the area, the lifespan of pump filters, sand filter systems, and other internal components, the objects flushed to the system.
How do you seal a septic riser?
Seal the riser to the septic tank using the patch mix. You may finish sealing by adding Bentonite or casing sealer around the base, filling in gaps as needed. Make sure you then carefully secure the riser lid with the screws provided to avoid a safety hazard! All risers must be completely sealed to the septic tank.
How do you hide a septic tank riser?
The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.
How many septic tank risers do I need?
A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.
What You Should Know About Septic Tank Risers
Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.
These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
What Are the Advantages of Using Risers?
Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
- The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
- The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
- For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
- Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.
- Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.
- Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.
- This allows for the installation of the pump and riser to be completed in a single step.
- Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.
- A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.
We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!
The benefits of septic tank risers
Installing septic tank access risers will save you money as well as your back. Accessing the septic tank is made simple by the use of rippers. | Photo courtesy of the Michigan State University College of Agriculture and Natural Resources The process of finding and pulling up the lid to your septic tank may be time-consuming and frustrating. In many cases, homeowners aren’t even sure where to begin their search for the lid to their septic tank. Some people are just unable to pull themselves out of a hole.
- What method do individuals use to locate the buried treasure that is their septic tank lid?
- Others look for a clue, such as a dead spot of grass or other visual signals, to help them find their way.
- Whatever way you choose, digging it out is still necessary, and if the correct location cannot be discovered, another hole must be excavated.
- Some counties, such as Kalamazoo, Oakland, and Otsego, mandate that septic tank access risers be erected; these are just a few examples.
- Contact your Michigan County to find out about the most recent onsite waste water rules that apply to you.
- A septic tank riser is a pipe that can be built of plastic, fiberglass, or concrete to carry waste away from the tank.
- The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.
It goes without saying that any modifications to your septic tank or system will need to be approved by your county environmental health department or another qualified inspector.
You may arrange the installation of a riser in your septic system to coincide with your usual septic system maintenance schedule.
It is also possible that having a riser in place will dramatically lower the overall cost of septic tank maintenance over time, owing to the increased ease of access and reduced time spent on the operation.
MSU Extension Educator Beth Clawson can provide further information on the onsite waste water systems you may be interested in.
The Michigan Department of Natural Resources has a team of natural resources educators working to provide aquatic invasive species instructional programming and support throughout the state.
You can reach out to an educator using MSU Extension’s ” Find an Expert ” search engine by searching for “Natural Resources Water Quality” in the keywords field. Resources:
Did you find this article to be informative?
You Might Also Be Interested In
The inefficiency of having to dig up your grass to access your septic tank whenever it has to be pumped or undergoes periodic maintenance is well known to those who own septic systems. However, while burying the tank below is a practical approach to keep it secure and hidden, it can make routine duties more complex, costly, and time-consuming. This is one of the primary reasons why many individuals prefer to install a septic tank riser. As the name implies, it is a concrete or plastic pipe that runs from the pump-out hole to the ground level of a sewage system.
If you’re deciding whether or not to acquire a tank riser, consider the following advantages and disadvantages:
- A septic tank riser makes it simple to determine where the system is located. PRO – Low maintenance: Besides being useful for maintenance, it may also be useful for monitoring the system’s operation and quickly accessing the system if something goes wrong. BEING ABLE TO FIND THE Septic System FAST may save you valuable time and work. Additionally, it may be able to assist minimize the expenses of any future service visits
- Nevertheless, PRO – Protected from the elements: Septic tank risers are intended to endure everything Mother Nature throws at them, including snow, wind, and whatever else Mother Nature has in store for them. Depending on the material used, the riser can be formed of concrete or a thick heavy plastic that is fitted with a highly strong cover to keep the system totally free of dirt. This can help to decrease damage to the system and avoid the occurrence of additional problems. A pipe or lid in the center of a lawn may be considered an eyesore by some homeowners, regardless of how handy it may be in other ways. CON – Convenience: In order to allow the grass to grow over the top of the riser lid, one alternative is to set the lid a couple of inches below the level of the lawn. Afterwards, all you’ll have to do is dig up that location without disrupting the rest of the yard. In most cases, homeowners prefer to build a riser on an existing septic system rather than constructing a new one. This is a project that will require the services of a septic tank professional. Even while this will necessitate some digging and disturbance in the yard, it’s vital to remember that it will ultimately preserve your lawn. CON – Cost:There are certain costs connected with building a septic tank riser, notably the cost of the supplies and the labor involved. Although this is an expenditure that will pay for itself in the long term through years of cost savings during future inspections and maintenance, it is one that should be considered.
It’s evident that building a septic tank riser may be a desirable upgrade, despite the few small drawbacks that may be connected with the process. If you have any more questions, please don’t hesitate to contact the professionals at Mike’s SepticMcKinley Sewer Services. Throughout Prior Lake, MN, we are experts in everything septic. This includes tank and system design as well as installation, accessories, pumping, cleaning, and routine septic maintenance. Reach out to one of our septic system specialists immediately by phone or email!
The Importance of Septic Tank Risers
Although there are a few small negative aspects to installing a septic tank riser, it is evident that it may be a valuable enhancement. If you have any more questions, please do not hesitate to contact the professionals at Mike’s SepticMcKinley Sewer Services. Throughout Prior Lake, MN, we are experts in everything septic. This includes tank and system design as well as installation, accessories, pumping, cleaning, and regular septic system maintenance. Reach out to one of our septic system specialists right away!
Septic Tank Risers will Lower Your Septic System Cost
On any new or updated septic system in the United States, authorized septic tank risers are required to be built by law in most states. This obligation, in contrast to many other legislative regulations, really provides advantages. Your septic system is one of the most expensive mechanical elements on your property. It is also one of the most complicated. It is also one of the least monitored and least understood systems that you have in your possession, as well. If you don’t have septic tank risers, your system will be “out of sight and out of mind” for a long time.
The average cost of a septic system in the United States is around $15,000.
If you add the interest costs to the $15,000 and divide the total sum by the length of time the system will live, your septic system will cost you more than $1,000 a year to maintain.
– You should educate yourself on septic system ownership and examine its operation on a regular basis because of the financial burden involved with it. The installation of septic tank risers is the most effective method of monitoring your septic system.
Advantages of Septic Tank Risers
Septic Tank Riser Made of Concrete The first advantage of an aseptic tank riser is that it is aesthetically pleasing. Every time you see the riser cover, it will serve as a constant reminder that you have a septic tank. This will help you to remember this truth on a frequent basis. Due to the unattractiveness of the old-style concrete covers, many individuals are uncomfortable with the idea of their septic tank risers being visible in their yard. Modern septic tank risers and covers are significantly more aesthetically pleasing, blend in with the surrounding environment, and are easier to install than previous models.
The concrete coverings are similarly heavy, weighing between 60 and 80 pounds.
Riser rings for septic tanks made of modern polymers are generally less than 30 pounds in weight.
Modern Septic Tank Risers Seal Surface Water
Septic Tank Riser of the 21st Century The fact that they are more easier to seal than older models means that they are better at keeping surface water from entering the tank. Old-fashioned concrete riser rings do not have a gasket included into them. As a result, surface water may readily flow between the connection between the tank and the riser ring, as well as between the lid and the riser ring, when the tank is filled with water. Nowadays, a watertight seal is installed between the septic tank and the base flange of the riser.
To keep little children from curiously messing with the cover and putting themselves in danger of falling into the septic tank, modern riser covers are fastened with threaded fasteners.
How to Inspect Your Septic Tank
On average, we recommend that you examine your septic tank visually once every six months. Simply removing the septic tank riser cover will allow you to do the check. Remove the cover from the tank and measure the height of the water level in the tank. The water level is typically 6″ to 8″ below the inside of the tank cover when the tank is full. The amount of air space above the water should be between 6″ and 8″ according to this rule. Because of how the clean-out cover is installed on your tank, you may be able to view the septic tank’s inlet or outflow baffle depending on the placement of the cover.
According to the outlet baffle (which should be closest to the drainfield), typical water level should be even with the bottom of pipe or no more than 14 inches deep in the pipe. Tank levels that are very high are an indication that the drainfield is not operating correctly.
Other Benefits of Septic Tank Risers
Approximately every 6 months, we recommend that you visually examine your septic tank. Simply remove the septic tank riser cover in order to do the examination. Observe the water level in the tank after it has been removed from its cover The water level is typically 6″ to 8″ below the inside of the tank lid when the tank is fully filled. The amount of air space above the water should be between 6″ and 8″. Because of how the clean-out cover is installed on your tank, you may be able to view the septic tank’s inlet or outflow baffle depending on where it is installed.
According to the outlet baffle (which should be closest to the drainfield), typical water level should be even with the bottom of pipe or no more than 1 inch deep in the pipe.
See How Simple it it to install our Septic Tank Riser
A septic tank system may be one of the most expensive mechanical elements on a property, making it one of the most important investments. It is also one of the least thought about or comprehended of all the concepts. It may be tempting to flush it down the toilet and forget about it, but doing so may be quite costly in the long run, since regular maintenance and monitoring can help to avoid pricey repair fees. Risers and lids for septic tanks are an excellent and cost-effective solution to ease future maintenance and monitoring of the tank.
What are septic tank risers and lids?
While your septic tank is located beneath the earth, septic tank risers provide a big diameter “well” that allows for a safe access point to the sewage tank to be located at ground level if necessary. The lid is attached to the top of the riser and is designed to completely encapsulate the system in an airtight and watertight manner. In this way, surface water and debris such as grass clippings, mulch, and soil are prevented from entering the tank. It also helps to keep gases and smells from leaking from the septic system as well.
There are several benefits to septic tank risers and lids
First and foremost, having a clearly visible septic tank lid on the property serves as a pleasant reminder that a septic system is in place. However, whereas older-style concrete coverings were considered to be heavy and unattractive, current plastic lids are lightweight and made to integrate with the surrounding environment. These lightweight variants make it simple and cost effective to install, monitor, and service your septic system, and they are also easy to transport. Savings on expenses By establishing an access point at ground level, service experts will have an easier time locating the septic system for routine maintenance, repairs, or to pump out the septic tank as necessary.
Stainless steel threaded fasteners are used to connect lids to the riser and keep them in place to avoid tampering by minors and potential falls into the septic tank.
The high duty riser and lid systems placed at ground level are sturdy enough to withstand being mowed directly over.
As a result, there is no need to spend the additional time and energy trimming around them.
At Aeration Septic Inc, we provide several different types and sizes of septic tank covers and lids. More information may be found by checking out our collection or by visiting our Amazon shop.
Septic Tank Risers
In what capacity does an aseptic tank riser serve, and why would you require one? If your septic tank service worker has to dig up your yard every time your septic tank has to be cleaned, you do not have a riser built, and it is probable that you have a concrete cover buried someplace underground. The Ariser septic tank lid replaces your old septic tank lid, allowing you to access your tank from aboveground, making it easier to manage. It is possible that installing a riser will lower the cost of pumping your tank (this is not a guarantee; be sure to inquire).
It may even be possible to gain access to your septic main for cleaning and inspection depending on your external pipe system.
However, if you have an older system, the majority of tanks were built with concrete lids that frequently degrade and are typically buried beneath the earth.
Most septic pumping companies also provide riser installation, and it is typically less expensive to consolidate services rather than buy them separately because you save on service fees by doing so.
Septic Tank Riser Styles
Septic tank risers are available in a variety of designs and are composed of a variety of various materials, including concrete. Despite the fact that some are built of concrete (which are the most durable), some people find them ugly. Concrete risers are more difficult to construct and may need the use of special equipment to lift them off trucks, increasing the labor costs even if the materials are less expensive. Septic covers made of polyethylene, PVC, and other plastic materials are lower in weight and come in a variety of heights to meet your demands.
The majority of designs may be made to fit your specific height requirements.
It should be noted that the load-bearing capacities of the lids varies.
Riser pipes are available in a variety of sizes ranging from 8 to 24 inches in diameter, with lengths varying based on the depth of your tank entrance.
Although it is possible to cover them with sod and mark their location in order to be able to raise them for maintenance, this defeats the point of accessibility and may lose you of the potential savings that come from not having to dig out your cover every time it has to be serviced.
Septic Tank Riser Cost
In addition to a variety of forms, risers for septic tanks are available in a variety of materials. However, some people find them unsightly, even if they are built of concrete (which is the most durable). Construction of concrete risers is more time-consuming, and they may necessitate the use of special equipment to lift them off trucks, increasing the labor costs even though the materials are less expensive. In addition to being less in weight and available in a variety of heights to meet your requirements, polyethylene, PVC, and other plastic septic covers are available.
- All of our designs are adjustable to accommodate any height need you may have.
- The load-bearing capacities of the lids are variable.
- Tank riser pipes are available in various sizes ranging from 8 to 24 inches in diameter, with lengths varying according to the depth of your tank openings.
- Although it is possible to cover them with sod and mark their location in order to be able to raise them for maintenance, this defeats the point of accessibility and may lose you of the potential savings that come from not having to dig out your cover every time it has to be accessed.
Installing Access Risers
In order to perform fundamental septic system maintenance, you must first evaluate the condition of your septic tank and pump chamber (if you have one), which can be time-consuming and labor-intensive if you do not have access ports known as risers. Consider the prospect of having to dig through two feet of dirt to check the oil on your vehicle. Installing septic tank risers for an off-site septic system is broken down into four steps, which are outlined below. Please keep in mind that the currentWashington State Coderequiresrisers for all septic systems, which means you may be forced to install one if you are asking for a construction permit, land division, or any other type of official action in the state.
A few safety tips before you get started:
- It is necessary to do routine septic system maintenance to assess the condition of your septic tank and pump chamber (if you have one), which can be time consuming and labor difficult in the absence of access ports, known as risers. It’s difficult to imagine having to dig through two feet of dirt to check the oil level on your automobile. For an off-site septic system, the following four-step procedure will walk you through the process. Please keep in mind that the currentWashington State Coderequiresrisers for all septic systems, which means you may be compelled to install one if you are filing for a construction permit, land division, or any other type of governmental action in the future.
Gather all the MaterialsTools You will Need
It should be possible to get most of the components required to construct a septic tank riser at your local plumbing hardware store or on the internet. PVC risers are available in a variety of shapes and sizes. Some of the brand names you might be familiar with include “Tuf-Tite,” “Polylok,” and “Orenco.” Risers are typically 24 inches in diameter and may be readily inserted into the tank hole opening without difficulty. Due to the fact that certain tanks have square openings, it might be difficult to fit a riser around the square entrance.
Some types of risers are made to order based on the height you want, while others are available in increments of 6-12 inches.
Then purchase an Adapter and Risers that are somewhat bigger in diameter than the hole.
See below for Step 4 on attaching risers to the tank entrance. For the purpose of installing a riser system on your septic tank, you will require the following components:
- Tank Adapter Ring (TAR)
- Riser Adapter Ring Kit
- Butyl Rope
- Risers
- Domed Lid OR Flat Lid
- Stainless Steel Screws
The following materials will be required for digging up your septic tank(s):
- As-built condition of the sewage treatment system The following items are required: sketch on paper, measuring tape, shovel, probing instrument, eye protection, and work gloves.
To cut risers to the proper size, the following tools are required:
- Circular saws, saber/jig saws, and hand saws
- Raspor file
- Marking pen
- Tape measure
- Drill with a 1/4″ bit
Materials required to seal the risers to the tank include:
- High-strength concrete patch mix
- A small bucket
- A mixing stick
- And gloves
Follow the four simple procedures shown below to install access risers on your septic components, or download and print a copy of theSeptic Tank Manhole and Access Riser Installationbrochure from Thurston County Environmental Health to get started right now.
Step 1: LocateYour Septic Tank(s)
When looking for your underground septic tank or tanks, it is essential to consult the ‘As-built’ Record Drawing linked with your septic system for assistance. Essentially, this is a plot diagram that shows where your septic system was put on your property, as well as distances between septic components and notable landmarks. The Online Permit System will guide you through the process of locating septic-related documentation if you do not have a “as-built” document. It is possible that you may need to contact Environmental Health to examine the paper records or seek a specialist to find your tank if an as-built is not accessible.
Probing the area around the septic tank with the probing instrument until you contact concrete should be done lightly.
The presence of underground electricity or other utility lines and cables might put your septic tank in danger.
Call 1-800-424-5555 or 811 or go online to make sure that any electrical utilities are found before you begin digging before you begin digging.
Step 2: Uncover Your Septic Tank (s)
Once you’ve discovered your septic tank, you may start digging about. The tank is typically 6 feet wide by 8 feet long, with the width being the largest size. Remove all of the pebbles and debris from around the tank’s lid openings and dig out the whole top of the tank. You will want to clean out any dirt that has accumulated on the surface of your septic tank. This will assist you in ensuring that you generate a high-quality seal. You should have two openings: one over the inlet (which comes from the home) and another over the outlet (which comes from the yard) (into the drainfield or pump chamber).
- You’ll need a riser for each of the doors you open.
- Typically, the inlet side is the one that is nearest to the home.
- When cleaning the tank, it is beneficial to remove the complete top of the tank.
- Risers must be modified in order to be correctly installed, and all manholes (holes 24 inches or bigger in diameter or square in shape) must also be updated, as well as the tankinlet and outlet baffle covers (if separate from the manholes).
- If you discover one – and only one – riser already installed, it is most likely for the pump chamber, which only requires a single riser to provide access to the pump to function properly.
- Remove the concrete lids so that they may be disposed when the project is completed.
- Consult your’As-built’Recorddrawing to establish whether you have a distribution box (D-box), which you will also need to unearth and place a riser on if you have a typical gravity system.
- Once the lids have been removed, proceed with caution around the tank.
- Inform someone of your whereabouts in case you are involved in an accident.
You should be aware that exposure to sewage can result in serious sickness, so make sure you wear gloves and thoroughly wash your hands afterward with soap and water. It is also recommended that you wear eye protection in the event that debris falls into a tank and splashes back at you.
Step 3: Fit Risers to Component Openings
In accordance with the diameter of the septic tank manholes, huge risers will either sit on top of the septic tank or will fit down into the aperture of the tank by 1-3 inches. It’s important to keep this in mind while calculating the height of the riser. The surplus can be easily removed; nevertheless, it is difficult to add a few inches to the length. Take the following measurements of the manhole cover’s diameter:
- Theriser will fit into the tank hole if the aperture is between 26 and 29 inches in diameter. Measure the distance from the ground to the top of the septic tank and multiply the measurement by three inches. The following is required if the aperture is greater than 29 inches: a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required. In this case, it lies above the manhole and narrows the aperture, allowing a 24-inch riser to be utilized instead of a more expensive 30-inch riser, saving money.
The distance between the ground and the top of the fiberglass plate should be measured. You may choose to place the risers so that they are level with the surface of the ground, or you may want them to stand out a few inches above the ground (if a riser is above ground make sure you are careful when mowing). Tips: To shorten a big riser with ribs, drill a 1/4-inch hole between the ribs above the cut line and finish the cut by following one of the grooves between the ribs with a saber/jig saw to finish the cut.
By eliminating one of the ribs from the largeriser, it may be made to fit more snugly into a smaller manhole entrance.
Step 4: Attach Risers toSeptic Tank (s)
It is recommended to pump out an old septic tank that is 20 years or older in order to check its structural integrity and water-tightness before using it again. If the tank requires extensive repairs, it is preferable to replace it with a new septic tank that includes risers as part of the installation. A permit from the local health department is required for the replacement of a septic tank. Remove any dirt and debris from the tank’s surface by cleaning it off. Using the butyl rope, construct the components of the risers in accordance with the manufacturer’s instructions.
- Jet-Set, Rapid-Set, Thorough-Set, and Perco-Plug are just a few of the brand names available.
- NOTE: For optimal results, just a little amount of concrete patch should be mixed at a time.
- The patch mix should be used to seal the riser to the septic tank.
- If you want to avoid a safety danger, make sure you properly attach theriser lid using the screws that come with it!
- Risers for inlet or outlet apertures that are smaller than the openings should have the bottom few inches sanded with rough sandpaper to allow a firmer connection between the two surfaces.
- A useful source of information on correct installation of risers on septic tanks may be found at your local hardware store where you purchased the risers and covers.
Thurston County Environmental Health is should be commended for providing the foundation for this documentation.
What is a Septic Tank Riser?
- A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
- Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.
In most cases, a septic tank riser costs between $200 and $400, not counting installation costs. Due to the fact that they save septic contractors time, riders save labor expenses. Septic tank riser installation is not something that should be attempted on your own. There are concrete and plastic septic tank risers to choose from.
What Is a Septic Tank Riser?
As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn. The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.
The Benefits: How Septic Risers Save You Money
As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years. However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.
No Digging Fees
You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank. Your septic tank will need to be recovered with dirt after it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.
Reduces Labor Costs
Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.
You’ll Only Pay for Materials and Labor Once
Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and begin to work more quickly. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor expenses.
Septic Tank Riser Styles
Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.
Concrete Septic Tank Risers
Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:
- Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
- Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection
Plastic Septic Tank Risers
Purchased at a high price and difficult to install Over time, it becomes more prone to corrosion and cracking. Lifting and maneuvering during installation or inspection will incur additional labor charges.
- Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
- They may be covered with sod to improve their looks
- It is not susceptible to cracking like cement. Plastic is resistant to erosion.
- It is possible to crush it beneath the earth
- However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.
How Much a Septic Tank Riser Costs
Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.
Installation Usually Requires a Plumber
In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.
They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.
Should You Get Risers for Your Septic System? – Septic Maxx
Many people have heard of septic tanks, but few people are familiar with what they are and how they function. Typically, customers learn about septic tanks when they purchase a septic tank and discover that the tank is malfunctioning. The majority of individuals learn the hard way when their septic tank begins to malfunction: septic tanks are expensive, septic tank repairs are highly expensive, septic tanks require regular maintenance, and house insurance does not often cover septic tank damage or problems.
- While certain septic tank difficulties are unavoidable, there are steps that septic tank owners may do to minimize the likelihood of some issues with septic tank operations and problems, such as the installation of risers, from occurring.
- The goal of this modification is to make the septic tank more easily accessible.
- The type of material used in a septic tank is determined by the tank’s size and the surrounding environment.
- It is often a good idea to install septic tank risers in order to prevent clogging of the tank.
- Risers are used to raise the height of the septic tank lid
- They are made of steel. Risers are used to keep frost from accumulating. Risers allow tank waste to be removed more quickly and easily
The installation of risers for a septic tank should not be construed as a problem-solving technique. In a wide range of topics relating to septic tank operations and potential difficulties, Risers will provide assistance to septic tank owners. It is still the responsibility of septic tank owners to perform routine maintenance and preventative care on their septic tanks. For many people, a septic tank is a mysterious apparatus that collects and holds waste and other things. However, there is a lot more to a septic tank’s daily operations, care, and maintenance than just keeping trash and other items contained.
When employing risers in conjunction with a septic tank, there are material and financial factors to consider.
For additional details, please contact us immediately.
Septic Tank Risers and Covers
Risers and covers for septic tanks are available on this page. Risers and covers for septic tanks Septic Services by Advanced Septic Services 2017-10-09T19:55:27+00:00
Installation and Benefits of Septic Tank Risers and Covers
Were you becoming a little tired of having to dig up the yard every time your septic tank needed to be serviced or pumped? We’ve come up with a solution! Clermont homes will benefit from the installation of septic tank risers and covers, which will make the procedure smoother and faster – and may even save you money in the long run.
The information and video provided below will assist you in better understanding how these septic tank risers and covers are placed, as well as the advantages of utilizing them.
What are Septic Tank Risers?
The septic tank riser is a thick piece of plastic that goes vertically up from the entrance at the top of the septic tank, allowing professionals easy access to the tank’s contents while pumping it out. Despite the fact that the riser appears to be a pretty basic concept, it is frequently absent from the ordinary septic tank, particularly if the tank is of an older construction. Bringing the septic tank’s access cover to the surface is the first step. A septic tank specialist will no longer be required to dig up your yard in order to get access to your septic tank lid for the purpose of performing repairs, waste disposal, or inspections.
The height of the riser will be determined by how deep into the earth the septic tank was buried when it was installed.
The septic tank risers and covers make it simpler for you, an inspector, or a septic waste disposal service to get to your tank when it is needed.
Installation of the Septic Tank Risers and Covers
There are three parts to installing the septic tank riser and cover, which may be broken down to make the procedure easier to grasp. Keep in mind that after the riser is put, you will not have to go through this operation again for the duration of the tank’s life. The following is the procedure that was followed in order to install the tank extension:
Step 1 – Choosing the Riser Material
In order to have the septic tank riser erected, you will have the option of selecting from a variety of various materials that will be utilized in its construction. The three most prevalent options are polyvinyl chloride (PVC), polyethylene, and concrete, each of which has its own advantages and disadvantages in terms of durability, simplicity of installation, and cost. Concrete is the least expensive of the building materials, but it is also the most difficult to install due to the greater labor requirements.
PVC septic tanks are a bit more expensive, but they are the lightest and easiest to install, and they are less prone to leak water or gasses throughout the course of the tank’s life, making them a top choice.
Step 2 – Where to Install Septic Risers
The septic tank riser makes it easier to get to the tank’s lid when it is full. Bringing the tank closer to the ground surface necessitates careful consideration of whether or not you want the cap on the riser to be visible or whether you want it to be just slightly below the surface of the grass. In most cases, an above-ground septic tank riser installation is employed in regions that are not visible or areas that do not interfere with lawn maintenance.
The construction of a below-ground septic tank riser will essentially conceal the riser, which will be slightly below the surface. However, you will have to trim some grass from the top of the riser each time you need to get access to the septic tank using this approach, which is more covert.
Step 3 – Determining Riser Height
When constructed 3 feet below the surface, a septic tank is considered to be effective; however, the typical depth is roughly 18 inches. A number of riggers can be piled on top of each other until they reach just below the surface of the water. Determining whether or not you want the cap above or below the surface allows you to make the appropriate measurements and materials choices before you begin working on the riser installation itself. The process is now complete after the tank riser has been halted and the terminus has been capped.
Benefits of Using Septic Tank Risers
Numerous advantages may be gained by having a skilled Clermont FL septic business install your septic tank risers and covers, including the following. If you have any further questions or concerns that have not been addressed here, you should speak with a member of the installation crew who will be able to elaborate on these benefits. Keep in mind that the cost of having the septic tank risers and covers installed is a one-time expense. Septic Tank Riser Installation The cost of the inspection and maintenance will be recouped by the savings on subsequent inspections and maintenance.
- Savings over a long period of time will accumulate significantly.
- Visual Assessment Made Simple:Risers and covers also make it simple for homeowners to undertake a fast visual inspection of their tanks to identify whether or not they are full.
- By simply lifting the septic tank cover, you will be able to view inside the tank and determine whether you need to hire a plumber or a septic pumping company like Advanced Septic Services to pump out the tank.
- Whenever the lid is only a few inches below the level of the lawn, a little patch of grass over it will quickly conceal both the riser and cap.
- You should now be aware of all of the advantages as well as the procedure for installing septic tank risers and covers.
Professional septic specialists will no longer be required to look for the septic tank by digging multiple holes in your yard in order to discover it. a link to the page’s load
Septic Tank Risers – #1 SC Septic
Septic Tank Pumping Near Me | Septic Tank Pumping in My Neighborhood If you are one of the twenty percent of houses in the United States that are not linked to a public sewage system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system.
These specialists are independent contractors that take care of your septic cleaning, septic pumping, and other essential maintenance tasks for a fee.
What Is a Septic Tank Riser?
Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task. Even after locating the tank, you or a septic specialist will have to dig into the ground in order to gain access to the tank itself. The installation of a septic tank riser is a cost-effective solution to this issue. It is a concrete or plastic pipe that extends up from the lid of your septic tank to make it easier for you or your septic service provider to get access to the septic tank and pump out the septic tank.
- Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers.
- Are you ready to form a partnership?
- Are you fed up with having to dig up your yard every time your septic tank has to be maintained or pumped?
- Greer Septic Tank Risers and covers make the procedure easier and faster for Greer, SC homes – and might even save you money over time.
- They are advantageous for homeowners who no longer wish to remove sod and dig many feet into the earth in order to reach their septic tank, as well as for those who wish to do routine maintenance on their septic tank.
- If you ever have to call a local septic provider for emergency septic service, having a set of risers will make the process much simpler.
Choosing and Installing Septic Tank Risers
Risers are available in a variety of materials, including PVC, polyethylene, and fiberglass. We normally advocate constructing risers made of PVC since it is impermeable, lightweight, and robust, all of which are important considerations. While concrete risers are less expensive, they are also significantly heavier and more prone to crumbling and degradation over time. When we come out to your home to install a new riser, we will assess the existing condition of your tank and discuss with you all of your alternatives for upgrading your system.
Call SC Septic now if you need a new riser installed on your septic tank. Riser installation is something we do for all of our customers in Greer, South Carolina. Every time you contact us, we are pleased to discuss your specific septic tank requirements.
Septic Tank Risers Greer South Carolina
If you have an older septic system, you may be wondering what a septic tank riser is and why you would need one. Traditional systems were designed to be out of sight, out of mind; they were buried for 15-20 years with no consideration given until they required emergency pumping or repair. Newer septic systems now have risers, which are a positive thing, since they provide a more efficient way of draining the tank. Septic tank risers provide simple access to your septic tank from the ground level as well as increased view into the operation of your septic system.
- As a result, service expenses are being reduced as a result of this.
- A septic tank riser, which costs only a one-time installation price, can safeguard your septic system for many years to come.
- You may also say goodbye to costly and unsightly excavations when it comes to upkeep.
- Your septic system will suffer long-term consequences if you don’t pay attention to it.
- In addition to protecting your system and saving you money, a septic tank riser is a reasonably easy solution.
Septic Tank Risers Near Me
One of the most challenging aspects of working on a septic tank system is the fact that all of the components are underground. This might make it very difficult to detect problems with your septic system until it is too late to do something about them. Septic tank riser installation may make access to your septic tank much more convenient, and it can even save you money in the long run. Why should you consider installing a septic tank riser in your home? A septic tank riser raises the top of a septic tank above the level of the earth, allowing the lid to be visible above the ground surface.
The top of your tank is also accessible to septic tank technicians, making it very quick and simple for them to undertake routine maintenance and inspections on your tank as a result of the opening.
If there are difficulties with your septic tank, you will no longer be required to pay for septic tank location, and service specialists will be able to complete their work much more quickly as a result.
You may reach SC Septic if you would like more information regarding the installation of septic tank risers and lids at your home. We will be able to discuss your alternatives with you and will be able to assist you with the installation in a timely and cost-effective manner!
Local Septic Tank Risers Installers
The installation of septic tank risers can make it much easier for you or your technician to get access to your belowground reservoir; however, they are not included with the majority of system installs. This is due to the fact that access is required so seldom that many company owners and households just choose to keep the entire system out of sight for aesthetic reasons alone. As long as your unit is in excellent condition, our professionals at SC Septic are happy to incorporate them from the beginning of the project and may refit them at any time down the road.
- In an unusual twist, most towns consider this installation to be a modification to the unit and, as a result, they demand a special permit to include them.
- It is necessary to clean soil from the top of the reservoir during the installation process, and the old coverings must be removed as well.
- Children and dogs should be kept away from the area during this period to ensure that no one gets trapped in the flooded region.
- As soon as the space has been cleared, the septic tank risers and lids are secured in place and the top of the reservoir is once again covered with earth.
- They save you money because they eliminate the need for excavation when your unit requires pumping, inspection, or maintenance, and you can be certain that you will never have to pay for someone to locate the reservoir after it has been installed.
- We can help you if you are looking for a Local Septic Tank Risers Installer or if you would like a full quote on installing septic tank risers.
- Travis Atkins Septic ServiceRead more about Travis Atkins “Dail was really accommodating in coming out to our home on a Sunday afternoon to service our septic system.
Within an hour, he had cleaned, drained, and emptied out our septic tank.
He came through for us in a big way.
We were lucky in that we were able to get things taken care of before to the holidays.
From the time of scheduling the vacation until the time of conclusion, it was a wonderful experience.
They come highly recommended by us.
I’ll absolutely utilize them again in the future.
Dail and his helper were professional, prompt, informed, and efficient in their service to the client.
We hired him to pump our septic tank, which he successfully completed at a reasonable cost and in a timely way.
Pumping Septic Tanks with Matthew Shaw & Sons More information can be found at In addition to being courteous and polite, they were the most comprehensive and professional organization I’d ever dealt with in terms of customer service and response times.
The professionalism with which they resolved my sewage problem was just what we needed, and I would suggest them to anybody who is in need of this sort of assistance.
Thank you one again, brother!
“I had my 1000-gallon septic tank pumped.
Jarrett was really kind and considerate of me and my stuff.
When the task was over, he did a good job of cleaning up.
SC From the minute I phoned to book an appointment to have my septic system cleaned to the moment the service was finished, Septic was excellent.
Such pleasant people, who are also quite professional and provide a terrific pricing.
Pumping Septic Systems by Ginny Crisp Continue reading this article He came out and performed an excellent job, working efficiently while remaining pleasant and sensitive to the issue.
I found him to be well-informed, honest, and professional.
Excellent service that comes highly recommended!
They were kind guys who took the time to ensure that I was completely happy before departing.
More from Lindsey Fensler, Septic SystemRead more “SC is an abbreviation for South Carolina.
The two gentlemen understood precisely what they had to do and executed it really well.
You could see they’d been doing this for quite some time.
On time, pleasant, and professionally dressed.
They came to my house and emptied out my septic tank, and they were quite thorough.
Continue reading this article “Luke and Jared conducted themselves in an extremely professional manner!
They were also well-prepared to answer all of my concerns about how the septic system worked, which was very helpful because this is my first time living in a house with a septic system.
I would highly suggest it!” Christine Hudson is a Septic System Pumping professional.
The only establishment prepared to open its doors on a Sunday evening, no questions asked!
They were able to arrive earlier than they had anticipated.
I would definitely recommend them and would use them again!” More information on Jim Cosmos Septic System Services In our case, it was the first time the septic system had been checked and pumped.
Unfortunately, the backfill had been placed 5 feet deep over the lid by the construction crew.
They worked quite hard and quickly.
We are quite delighted with Ginene Gugel’s Septic Tank Repair services.
An emergency call was placed late at night previous to their arrival because of a back up in service.
It turned out that we had a huge volume of waste that needed to be evacuated out of the house since it was blocking our drain.
Their assessment of the state of our tank and the necessary repairs to be performed to prevent future problems was also quite enlightening. I am quite pleased with the service they performed and would definitely suggest them. PreviousNext
