What are the symptoms of a bad septic tank?
- Slow-draining sinks, tubs and toilets are a warning sign that your septic tank is nearing capacity or that your drainage lines are damaged. Another warning sign is a gurgling or burping sound coming from your drains. This sound indicates that wastewater is not flowing freely.
What is the cheapest septic tank?
Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
What are the alternatives to septic tanks?
Alternative Septic Systems
- Raised Bed (Mound) Septic Tank Systems. A raised bed drain field (sometimes called a mound) is just like what it sounds.
- Aerobic Treatment Systems (ATS) Aerobic systems are basically a small scale sewage treatment system.
- Waterless Systems.
How long do septic tanks last?
A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
How big of a septic tank do I need?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
Are plastic septic tanks good?
Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.
What are the 3 types of septic systems?
Types of Septic Systems
- Septic Tank.
- Conventional System.
- Chamber System.
- Drip Distribution System.
- Aerobic Treatment Unit.
- Mound Systems.
- Recirculating Sand Filter System.
- Evapotranspiration System.
Is a cesspit the same as a septic tank?
A cesspit is a sealed underground tank that simply collects wastewater and sewage. In contrast, septic tanks use a simple treatment process which allows the treated wastewater to drain away to a soakaway or stream.
What is the most common cause of septic system failure?
Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.
How do you know if your septic system is failing?
The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.
What will ruin a septic system?
Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.
Tennessee Plastic Septic Tanks For Sale
|200 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time||47″||47″||56″||47″ L 47″ W 56″ H||1||43745||MN, MS, OH, OK, UT||$520|
|225 Gallon Septic Pump Tank – FL Approved||47″||47″||56″||47″ L 47″ W 56″ H||1||44788||FL||$567|
|300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time||48.5″||48.5″||53″||48.5″ L 48.5″ W 53″ H||1||5260000W94202||AR, CA, MS, NE, WV||$962|
|300 Gallon Septic Pump Tank||54″||54″||56″||54″ L 54″ W 56″ H||1||AST-0300-1||IA||$729|
|300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time||54″||54″||54″||54″ L 54″ W 54″ H||1||41319||CA, GA, MN, MS, NY, OH, OK, UT, WA||$724|
|300 Gallon Septic Pump Tank – FL Approved||54″||54″||54″||54″ L 54″ W 54″ H||1||44789||FL||$974|
|500 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time||60″||60″||63″||60″ L 60″ W 63″ H||1||5170000W94203||AR, CA, MS, WV||$1,223|
|500 Gallon Septic Tank||88″||48″||43″||88″ L 48″ W 43″ H||1||ST21L||MS||$0|
|500 Gallon Septic Pump Tank||63″||63″||74″||63″ L 63″ W 74″ H||1||AST-0500-1||IA||$933|
|500 Gallon Septic Pump Tank||64″||64″||67″||64″ L 64″ W 67″ H||1||40785||CA, MN, NY, OH, OK, UT, WA||$963|
|500 Gallon Septic TankShips Fast! ~ 48 Hour Lead Time||101″||51″||47″||101″ L 51″ W 47″ H||1||41320||GA, MN, MS, UT, WA||$1,048|
|525 Gallon Septic Pump Tank – FL Approved||64″||64″||67″||64″ L 64″ W 67″ H||1||44830||FL||$1,134|
|750 Gallon Septic Tank||96″||52″||62″||96″ L 52″ W 62″ H||1||41712||MN, OH||$0|
|1000 Gallon Septic Tank||101″||52″||71″||101″ L 52″ W 71″ H||1||44622||MN, OH||$0|
|1000 Gallon Septic Tank||102″||60″||63″||102″ L 60″ W 63″ H||1||41718||GA, MN, MS, NY, OH, OK, UT, WA||$1,922|
|1000 Gallon Septic Tank||102″||60″||63″||102″ L 60″ W 63″ H||2||41720||GA, MN, MS, NY, OH, OK, UT, WA||$2,020|
|1250 Gallon Septic Tank||116″||55″||70″||116″ L 55″ W 70″ H||1||41741||MN, NY, OH, OK, UT, WA||$2,136|
|1250 Gallon Septic Tank||116″||55″||70″||116″ L 55″ W 70″ H||2||41743||MN, NY, OH, OK, UT, WA||$2,283|
|1500 Gallon Septic Tank||135″||55″||70″||135″ L 55″ W 70″ H||1||41758||GA, MN, NY, OH, OK, UT, WA||$2,611|
|1500 Gallon Septic Tank||135″||55″||70″||135″ L 55″ W 70″ H||2||41760||GA, MN, NY, OH, OK, UT, WA||$2,787|
|2000 Gallon Holding Tank||126″||98″||51″||126″ L 98″ W 51″ H||1||42559||WA||$4,169|
|2000 Gallon Holding Tank||126″||98″||51″||126″ L 98″ W 51″ H||1||44593||MN, OH, OK||$4,169|
|2000 Gallon Septic Tank||126″||98″||51″||126″ L 98″ W 51″ H||1||44593||MN, OH, OK||$4,169|
|2500 Gallon Holding Tank||159″||99″||51″||159″ L 99″ W 51″ H||1||44079||CA, MN, OK||$5,178|
|2600 Gallon Holding Tank||155″||99″||51″||155″ L 99″ W 51″ H||1||43770||MN||$5,450|
|2650 Gallon Holding Tank||155″||99″||81″||155″ L 99″ W 81″ H||1||43771||MN||$5,723|
|3525 Gallon Holding Tank||211″||102″||51″||211″ L 102″ W 51″ H||1||44390||CA, MN, TX||$8,438|
Learn how much it costs to Install a Septic Tank.
Septic tanks range in price from $140 to $300, or an average of $220. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?
|Typical Range||$140 – $300|
|Low End – High End||$140 – $300|
The cost information in this report is based on real project costs submitted by HomeAdvisor members.
New Septic System Cost
Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:
- Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
- Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
- Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300 Approximately $1,500 to $4,000 in labor costs. It costs $500 to $2,500 to install a septic tank
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
It costs anywhere from $3,000 to $15,000 to build a leach or drain field as part of your septic system. It costs between $2,000 and $10,000 to install a typical drainage system. Septic systems include several sections, one of which is the drain or leach field, which sends wastewater back to the ground. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainage system. It is possible that you may require cleanup for blocked or flooded fields, which would increase the cost of the project by $10,000 to $50,000.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Costs range from $7,000 to $18,000 for a sand filter septic system. They can be built above or below ground depending on the situation and resources available. In order to disperse the wastewater into the earth, they employ a pump chamber to drive the wastewater through a sand filter. In most cases, a PVC lining is used to line the filter box. As a result, it is pushed through the sand and returned to the pump tank, where it is subsequently disseminated over the earth.
Evapotranspiration systems range in price from $10,000 to $15,000 per system.
In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.
Replacement of the filter costs between $230 and $280.
Drain Field Replacement Cost: $7,500.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- The normal cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks hold between 600 and 2,000 gallons of wastewater. Every three to five years, you should have a professional examine and pump your septic tank. It is recommended that you get your water pumped at least once every three years if you live in a bigger home (with more than three bedrooms). An checkup of a septic system can cost anywhere from $100 to $900 dollars. Septic system visual inspection is performed by your septic inspector. You may spend an additional $250 to $900 on a camera check of the lines, but this is only essential if your drains are running slowly and you can’t figure out what’s causing the issue.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water.
Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
Keep your drainfield free of vehicles and parking; No trees should be planted near your drainfield. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment.
Concrete Septic Tank Cost
Never park or drive your vehicle on your drainfield; Never put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage systems
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
Average costs for fiberglass septic tanks range from $1,200 to $2,000, excluding installation costs. It does not shatter or corrode readily, but it is prone to harm during installation, much as plastic is during transport and storage. As a result of its lighter weight and greater vulnerability to structural damage, the tanks themselves can move in the soil underneath them.
Labor Costs to Install a Septic System
Fiberglass septic tanks cost on average between $1,200 and $2,000, not including installation. Fiberglass does not break or corrode quickly, but it is subject to damage during the installation process, just as plastic is. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.
In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.
A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
- Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
Ace, Norwesco, and Snyder Industries brand septic tanks are available at Tank Depot at competitive prices. Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. State and municipal health officials from coast to coast have certified Norwesco septic tanks, which are covered by a three-year warranty and have been in use for decades.
- NORWESCO BELOW GROUND TANKS – Conversion OptionInformation about NORWESCO BELOW GROUND TANKS Choosing a location for the installation of your Plastic Septic Tank When purchasing a septic tank, it is important to examine the following characteristics.
- Installation is a breeze.
- Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.
- Construction is made of a single piece of rotationally molded plastic.
- Design for Exceptional Strength The design of the ribs and the location of the ribs give the tank with exceptional structural stability.
- Norwesco’s stringent quality control measures ensure that its septic tanks are safe for the environment.
- 750, 1000, 1250, and 1500 gallon tanks are offered as single compartment or double compartment tanks (2/3 – 1/3) depending on your needs.
- Pre-plumbed / ready to be put into service Norwegian Septic Tanks (750 gallons and greater) are delivered to you fully assembled and ready to be installed.
- Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
- This upgraded design outperforms existing lid designs in terms of strength and durability.
The gasket ensures a watertight seal around the opening of the lid. Accessory options are available. Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.
New Hampshire Septic Tanks For Sale
The following are the requirements for obtaining approval for septic tanks in New Hampshire:
|200 Gallon Plastic Septic Pump Tank (43745)||200 Gallons||47″ dia x 56″H||N-43745||$519.99|
|300 Gallon Sphere Pump Tank (41319)Ships In 48 Hours||300 Gallons||54″ dia x 54″H||N-41319||$723.99|
|300 Gallon Plastic Septic Pump Tank||300 Gallons||54″dia. x 56″H||A-AST-0300-1||$720.26|
|500 Gallon Sphere-Pump/Dosing Tank (40785)||500 Gallons||64″ dia. x 67″H||N-40785||$989.00|
|500 Gallon Plastic Septic Tank – 1 Compartment||500 Gallons||101″ L x 51″ W x 47″ H||N-41320||$1,061.00|
|500 Gallon Plastic Septic Pump Tank||500 Gallons||63″dia. x 74″H||A-AST-0500-1||$998.31|
|1000 Gallon Plastic Septic Tank – 1 Compartment||1000 Gallons||102″ L x 60″ W x 58″ H||N-41718||$1,785.00|
|1000 Gallon Plastic Septic Tank – 2 Compartment||1000 Gallons||102″ L x 60″ W x 58″ H||N-41720||$1,916.00|
|1000 Gallon Bruiser Septic Tank – 1 Compartment||1000 Gallons||102″ L x 60″ W x 58″ H||N-41734||$2,213.00|
|1250 Gallon Bruiser Septic Tank – 1 Compartment||1250 Gallons||116″ L x 55″ W x 70″ H||N-41752||$2,791.00|
|1250 Gallon Bruiser Septic Tank – 2 Compartment||1250 Gallons||116″ L x 55″ W x 70″ H||N-41753||$2,954.00|
|1250 Gallon Plastic Septic Tank – 1 Compartment||1250 Gallons||116″ L x 55″ W x 70″ H||N-41741||$2,067.00|
|1500 Gallon Plastic Septic Tank – 1 Compartment||1500 Gallons||135″ L x 55″ W x 70″ H||N-41758||$2,675.00|
|1500 Gallon Bruiser Septic Tank – 2 Compartment||1500 Gallons||135″ L x 55″ W x 70″ H||N-41772||$3,554.00|
|1500 Gallon Bruiser Septic Tank – 1 Compartment||1500 Gallons||133″ L x 55″ W x 70″ H||N-41771||$3,342.00|
|1500 Gallon Plastic Septic Tank – 2 Compartment||1500 Gallons||135″ L x 55″ W x 70″ H||N-41760||$2,857.00|
|1500 Gallon 2 Compartment Plastic Septic Tank (Preplumbed)||1500 Gallons||157″ L x 69″ W x 51″ H||N-43502||$2,903.99|
|1500 Gallon 2 Compartment Plastic Septic Tank (Loose Plumbing)||1500 Gallons||157″ L x 69″ W x 51″ H||N-43504||$2,725.00|
|1500 Gallon 1 Compartment Plastic Septic Tank (Preplumbed)||1500 Gallons||157″ L x 69″ W x 51″ H||N-43498||$2,880.00|
|1500 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing)||1500 Gallons||157″ L x 69″ W x 51″ H||N-43518||$2,547.00|
|2000 Gallon Underground Holding Tank||2000 Gallons||126″ L x 98″W x 51″H||N-44593||$4,493.00|
|2500 Gallon Underground Holding Tank||2500 Gallons||159″L x 99″W x 51″H||N-44079||$5,177.99|
|2600 Gallon Underground Holding Tank||2600 Gallons||155″ L x 98″W x 51″H||N-43770||$5,910.22|
|2650 Gallon Underground Holding Tank||2650 Gallons||155″ L x 98″W x 81″H||N-43771||$6,394.00|
|3525 Gallon Underground Holding Tank||3525 Gallons||211″ L x 102″ W x 51″ H||N-44390||$8,437.99|
A number of health code standards exist in the United States and Canada that our tanks must fulfill in order to be approved. These codes are governed by the laws of the state, county, or province in which you reside. Please speak with your local health agency for assistance in choosing the tank you require.
Plastic Septic Tanks
Plastic-Mart.com is one of the nation’s top suppliers of plastic septic tanks, offering a diverse selection of goods from the most dependable manufacturers in the business. When looking for a sewage holding tank for a residential or business installation, rotomolded plastic septic tanks made of polyethylene resins are an excellent choice. Our rotational molding technology creates better, stronger plastic tanks at a far lower cost than our competitors’ processes. We provide ribbed septic tanks for in-ground usage, as well as a large choice of other septic tank accessories.
Septic tanks are used for a variety of purposes, including holding tanks, waste storage tanks, and more.
We even offer plastic septic tanks that can be sent in as little as 48 hours, such as:
- Plastic Septic Pump Tanks: 200 Gallon Plastic Septic Pump Tank
- 300 Gallon Sphere Pump Tank
- 500 Gallon Low Profile Plastic Septic Tank
- 1000 Gallon 2 Compartment Plastic Septic Tank
- 200 Gallon Low Profile Plastic Septic Pump Tank
How Much Does a Septic Tank System Cost?
A Quick Look at Septic Tank Prices
- Total cost: $3,900 on average
- $1,500 to $5,000 on a sliding scale
- Anaerobic septic tanks cost between $2,000 and $5,000
- Aerobic septic tanks cost between $10,000 and $20,000
- Gravity septic tanks cost between $1,500 and $4,000
- Mound septic tanks cost between $10,000 and $20,000
- Chamber septic tanks cost between $1,500 and $5,000
- Conventional septic tanks cost between $2,000 and $5,000.
The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.
What Is a Septic Tank?
A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree. It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. Liquid waste is then filtered away.
How Much Does It Cost to Install a Septic Tank?
In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.
Types of Septic Tank Systems
Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:
Anaerobic Septic System
The entire cost of building or repairing your septic tank is heavily influenced by the type of system you select. Tanks come in a variety of shapes and sizes, including the following:
Aerobic Septic System
Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated.
It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones. Expect to pay anything between $10,000 and $20,000 for this service.
Gravity Septic System
Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.
Conventional Septic System
A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily. In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.
Mound Septic System
If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow effluent from the tank to be pumped into the mound in modest amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater. This design necessitates a large amount of floor space. They’re also expensive to install since a sand mound needs to be built before they can be utilized.
Chamber Septic System
Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.
Septic Tank Materials
Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:
Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.
Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.
Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.
In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained.
As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.
What Size Septic Tank Do You Need?
The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.
A septic system with a minimum of a 750-gallon septic tank is required for a two-bedroom residence. However, in many localities, a 1,000-gallon tank is the least capacity that may be accommodated.
A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.
A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:
- How to keep the cost of septic tank pumping to a bare minimum
- 3 Symptoms of Sewer and Septic System Problems
- Do you have a clogged sewer line? Here’s What You Should Do
- Water Sewer Line Repair: Do It Yourself or Hire a Professional
- Listed here are 15 common plumbing problems that every homeowner should be aware of.
Septic Tank Repair Costs
It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:
In certain cases, a specific component of your septic tank may be required rather than the complete system. When compared to a complete system replacement, repairs and replacement parts can be far less expensive. The following are some of the most often encountered issues with automobiles:
A replacement septic tank pump typically costs between $500 and $1,200.
It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.
It is the most typical type of filter change that is performed by consumers. On average, it costs $230 to $280 per person.
The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.
Additional Factors to Consider
A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.
Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.
How Long Does a Septic Tank Last?
The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.
In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops. We’ll dispatch one of our locally based, licensed, and highly qualified professionals to complete the work for you right away.
Septic Tank Installation and Pricing
To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.
Who Needs a Septic Tank?
For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.
How to Prepare for Your Septic Tank Installation
Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.
Receive Multiple Estimates
Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.
Test the Soil and Obtain a Permit
For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.
Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test.
Plan for Excavation
Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home.
Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected. Adobe Licensed (Adobe Licensed)
The Cost of Installing a Septic Tank
There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.
A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested. Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.
Building Permit Application
A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil conditions. Professionals often only drill a few holes in the suggested leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.
Excavation and Installation
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.
Types of Septic Tank Systems
Septic system that is used in the traditional sense Traditionally, a septic system relies on gravity to transport waste from the home into the septic tank. Solid trash settles at the bottom of the sewage treatment plant, while liquid sewage rises to the top. Whenever the amount of liquid sewage increases over the outflow pipe, the liquid waste is discharged into the drain field, where it continues to disintegrate. This type of traditional septic system is generally the most economical, with an average cost of roughly $3,000 on the market today.
Drain fields for alternative systems require less land than conventional systems and discharge cleaner effluent.
Septic system that has been engineered A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult to install.
It is necessary to pump the liquid waste onto a leach field, rather than depending on gravity to drain it, in order to ensure that it is equally dispersed across the land.
Types of Septic Tanks
- Septic system that is conventional Traditionally, a septic system relies on gravity to transport waste from the home to a holding tank. From there, the sewage is divided into layers, with solid waste settling at the bottom and liquid sewage rising to the top of the separation process. When liquid sewage reaches to the level of the outflow pipe, the liquid waste goes into the drain field, where it decomposes even more quickly than before. Standard septic systems are often the most economical, with an average cost of roughly $3,000 to install. Septic system alternatives Instead of employing naturally existing bacteria to break down waste, alternative septic systems use oxygen to accomplish so. An alternative septic system collects sewage in the same manner as a conventional system. When using alternate technologies, drain fields typically take up less space and discharge cleaner effluent. But this advantage comes at the expense of a higher price, with systems typically costing approximately $12,000 to purchase. Septic system that has been engineered. A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult of the three. Engineered systems collect and segregate waste in a tank in the same way as alternative and traditional septic systems do. Instead of depending on gravity to drain the liquid waste, it is necessary to pump the waste into the leach field in order for it to be equally dispersed over the land surface. The average cost of these systems is around $8,000.
More information may be found at: Septic Warranty Coverage and Costs.
Using Your Septic Tank
It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.
Consequently, there will be no accumulation of solid waste that will leach into the surrounding soil or groundwater. Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.
Septic Tank Installation and Replacement Cost
The typical cost in the United States ranges from $500 to $5,000. The national average cost of a septic tank installation or the cost of replacing an outdated septic system is dependent on a number of different variables.
|Septic Tank Installation||Average Costs|
|National Minimum Cost||$500|
|National Maximum Cost||$5000|
|National Average Cost||$1500|
According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.
- Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.
- The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.
- Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.
- Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.
What’s in this cost guide?
- Species of soil
- Tank size and tank type
- Equipment installation and maintenance
- Lift station
- Septic systems that are not conventional
- How septic tanks function
- Signs that you need to upgrade your system
- How to employ a professional
Alternative septic systems
Alternative techniques are particularly effective on steep locations, highly rocky land, or poor soil. Among the options available are aerobic septic systems, mound septic systems, raised-bed septic systems, and others. The cost of a septic system installation or replacement may be greater or cheaper than the average depending on the area and kind of system. Locate the most qualified septic system consultant for your project needs. Zip code must be entered correctly.
Signs you need a new system
Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.
Knowing what indicators to look for might help you catch an issue before it becomes a major problem.
This includes having your septic tank pumped out by a professional every three to five years.
Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.