Where Can I Go To Pick Up A Norwesco Septic Tank? (Solved)

  • Upon being notified that the tank is ready for pick-up, Tank-Depot will provide you with a 6 digit trip # which allows you go and pick up your tank M-F 8:30 am – 2:30 pm. Tank-depot and the local manufacturers appreciate the opportunity to provide local pick and the cooperation required for the process to be efficient. Freight Class: 300

How much does a 2000 gallon concrete septic tank weigh?

Answer: Our 2000 gallon concrete septic tanks weigh approximately 16,000 lbs., but weight varies between precast manufacturers depending on the dimensions, wall thickness, floor & top thickness, & rebar reinforcement.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

What are norwesco septic tanks made of?

The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service.

Are fiberglass septic tanks any good?

If you’re planning to install a new septic tank or replace an existing one, then a fiberglass tank can be a great choice! 1. They weigh less compared to steel and concrete tanks and can be easily installed anywhere. This can be a huge advantage in areas where big trucks or cranes find it difficult to reach.

Which is better concrete or fiberglass septic tank?

While concrete is known for its durability, fiberglass septic tanks are even more durable. Once buried, fiberglass tanks become completely inert. Unlike concrete, it won’t degrade, rust, or weaken. Fiberglass septic tanks also require less maintenance than concrete septic tanks do.

How often should a 2000 gallon septic tank be pumped?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How do I decide where to put my septic tank?

Ideally, a septic tank should be placed on level ground. If possible, the tank should be placed on high ground in order to avoid flooding and seeping. It will be important that you look around and avoid steep slopes or areas of dense tree roots that can damage your entire system.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

How do I know if my house has a septic tank?

A surefire way to confirm whether or not your home has a septic system is to check your property records. It is likely that the building permit and blueprints for your home and property will contain information about the presence (or lack) of a septic tank.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

  1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
  2. Check Permits and Public Records.
  3. Determine Septic Tank Material.
  4. Time to Dig.
  5. Mark the Location for Future Maintenance.

How many Infiltrator chambers do I need?

As a general rule, trenches ‘fingers’ should be no longer than fifty feet ( 12 or 13 Infiltrators long ) for best function and most even effluent distribution. Unless you are installing as a “bed” system (where the chambers are right next to each other), leave at least six feet of undisturbed soil between fingers.

How do I connect two septic tanks together?

Use a 4-inch pipe to connect the two septic tanks. Place this pipe into the inlet hole of your new septic tank before you lower it into the ground. After you’ve lowered your new septic tank, insert the other end of the pipe into your old septic tank’s outlet hole.

How close can you build to a septic tank Australia?

Setback distances apply for septic system installation where existing farm dams and surface waters are to be considered when designing the layout of the proposed system. 1 Farm Dams – Minimum setback of 60 metres. 2 6 metres on the upslope of any building. 3 3 metres on the down slope of any building.

Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. A complete three-year guarantee is provided from the date of manufacturing, and Norwesco septic tanks have been certified by state and municipal health officials throughout the United States. Norwesco septic tanks have received certification from both the IAPMOTM and the CSATM, when appropriate.

You will be pleased to learn that Norwesco tanks will exceed your expectations in terms of performance and lifespan.

Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.

DESIGNED AS A ONE-PIECE CONSTRUCTION WITH ROTATIONAL MOLDING Norwesco septic tanks are created using the rotational molding method, which results in a tank that is one piece, seamless, and waterproof in construction.

  1. CHEMICAL RESISTANCE THAT IS OUTSTANDING Due to the fact that polyethylene is unaffected by soil chemicals as well as by the chemicals and gases inherent in sewage, Norwesco septic tanks will not rust or corrode and will not require any extra coatings, as would be required by other tanks.
  2. A SINGLE OR A DOUBLE COMPARTMENT HOUSE Tanks are available in both single compartment and double compartment (2/3 – 1/3).
  3. A WATERTIGHT LIDNorwesco septic tanks are built with a watertight lid as standard equipment.
  4. When the lid leaves our facility, it will be secured to the tank with stainless steel screws and will have a gasket between the lid and the tank as standard.
  5. ACCESSORIES ARE AVAILABLE FOR ORDER Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.

Norwesco, Inc. was founded in the year 2022. All Intellectual Property Rights are Reserved. Minnesota Web Design is a service that provides web design services to businesses in Minnesota. W.A. Fisher & Company

Norwesco : Below Ground Tanks : Low Profile Septic

In addition, because Norwesco Low Profile septic tanks are molded in one piece, there is no further assembly required, which reduces installation time and labor. Other characteristics are as follows:

  • Rugged, one-piece tank that is rotationally molded and does not have any seams to leak
  • Because there is no assembly necessary, installation time and effort are reduced. During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
  • Unless otherwise specified, all sizes (with the exception of the 500 gallon) are acceptable for use as a septic tank or pump tank, and they may also be used to store non-potable water. It is acceptable to use Norwesco low profile manhole extensions, double-wall corrugated pipe, and ribbed PVC pipe in access apertures and lids. (With the exception of the 500 gallon tank, all other tanks are available with either loose PVC tees and gaskets supplied by the manufacturer or with installed PVC tees and septic adapters.) Double compartment = two-thirds plus one-third
Below Ground Low Profile Septic Tanks
Gallon Capacity Length Width OverallHeight Manhole Diameter Compartment Part No. Availability
500 Non-plumbed 97″ 48″ 42″ 1-20″ (63672) Single 43522 C,E,G,L
750 w/gasketstees 92″ 60″ 51″ 2-20″ (63672) Single 43495 B,E,G
750 w/septic adapters 92″ 60″ 51″ 2-20″ (63672) Single 43520 E
750 w/gasketstees 92″ 60″ 51″ 2-20″ (63672) Double 43499 B,E,G,H
750 w/septic adapters 92″ 60″ 51″ 2-20″ (63672) Double 43521 E
750 w/gasketstees-IAPMO 92″ 60″ 51″ 2-20″ (63672) Double 44510 L,O
1000 w/gasketstees 127″ 60″ 51″ 2-20″ (63672) Single 42405 B,C,D,E,F,H
1000 w/septic adapters 127″ 60″ 51″ 2-20″ (63672) Single 43496 E,H
1000 w/gasketstees-IL 127″ 60″ 51″ 2-20″ (63672) Single 43538 C
1000 w/gasketstees-SI 127″ 60″ 51″ 2-20″ (63672) Single 40197 G
1000 w/gasketstees 127″ 60″ 51″ 2-20″ (63672) Double 43517 B,C,D,E,F,H
1000 w/septic adapters 127″ 60″ 51″ 2-20″ (63672) Double 42406 E,H
1000 w/gasketstees-IL 127″ 60″ 51″ 2-20″ (63672) Double 43541 C
1000 w/gasketstees-NC/SC 127″ 60″ 51″ 2-20″ (63672) Double 43510 D
1000 w/gasketstees-SI 127″ 60″ 51″ 2-20″ (63672) Double 40198 G
1000 w/gasketstees-IAPMO 127″ 60″ 51″ 2-20″ (63672) Double 44482 L,O
1250 w/gasketstees 157″ 60″ 51″ 2-20″ (63672) Single 43519 B,C,E,F,H
1250 w/septic adapters 157″ 60″ 51″ 2-20″ (63672) Single 43497 E,H
1250 w/gasketstees-IL 157″ 60″ 51″ 2-20″ (63672) Single 43539 C
1250 w/gasketstees-SI/SO 157″ 60″ 51″ 2-20″ (63672) Single 43544 D
1250 w/gasketstees 157″ 60″ 51″ 2-20″ (63672) Single 43572 G
1250 w/gasketstees 157″ 60″ 51″ 2-20″ (63672) Double 43503 B,C,E,F,H
1250 w/septic adapters 157″ 60″ 51″ 2-20″ (63672) Double 43501 E,H
1250 w/gasketstees-IL 157″ 60″ 51″ 2-20″ (63672) Double 43542 C
1250 w/gasketstees-NC/SC 157″ 60″ 51″ 2-20″ (63672) Double 43511 D
1250 w/gasketstees-SI/SO 157″ 60″ 51″ 2-20″ (63672) Double 43545 D
1250 w/gasketstees-SI 157″ 60″ 51″ 2-20″ (63672) Double 43571 G
1250 w/gasketstees-IAPMO 157″ 60″ 51″ 2-20″ (63672) Double 44483 L,O
1500 w/gasketstees 157″ 69″ 51″ 2-20″ (63672) Single 43518 B,C,E,F,G,H
1500 w/septic adapters 157″ 69″ 51″ 2-20″ (63672) Single 43498 E,H
1500 w/gasketstees-IL 157″ 69″ 51″ 2-20″ (63672) Single 43540 C
1500 w/gasketstees-SI/SO 157″ 69″ 51″ 2-20″ (63672) Single 43546 D
1500 w/gasketstees 157″ 69″ 51″ 2-20″ (63672) Double 43504 B,C,E,F,G,H
1500 w/septic adapters 157″ 69″ 51″ 2-20″ (63672) Double 43502 E,H
1500 w/gasketstees-IL 157″ 69″ 51″ 2-20″ (63672) Double 43543 C
1500 w/gasketstees-NC/SC 157″ 69″ 51″ 2-20″ (63672) Double 43512 D
1500 w/gasketstees-SI/SO 157″ 69″ 51″ 2-20″ (63672) Double 43547 D
1500 w/gasketstees-IAPMO 157″ 69″ 51″ 2-20″ (63672) Double 44484 L,O
IL=for installation in the state of Illinois NC/SC=for installation in the states of NorthSouth Carolina SI/SO=side inlet/side outlet IAPMO=International Association of PlumbingMechanical Officials
See also:  How To Manage An Old Septic Tank? (Solution)

One-piece tank that has been rotationally molded to be tough and leak-proof; Because there is no assembly necessary, installation time and effort are reduced; While installing, there is no need for further backfill or water filling. During pump-outs, it is possible to pump the water out completely dry. 6″ to 36″ of cover can be used for installation. In addition to being appropriate for use as a septic tank or pump tank, all sizes (with the exception of the 500 gallon) may also be used to store non-potable water.

Tanks (with the exception of the 500 gallon) are available with PVC tees and gaskets that are provided loose or with PVC tees and septic adapters that have been fitted; and 2/3 – 1/3 in a double compartment

Norwesco Septic Tanks

200 Gallon Plastic Septic Pump Tank N-43745 200 Gallon 47″D x 56″H MN, OK, OH, UT $519.99
300 Gallon Spherical Pump TankShips in 48 Hours N-41319 300 Gallon 54″L x 54″W x 51″H MN, OH, GA, OK, NY, WA, CA, UT $723.99
500 Gallon 1 Compartment Low Profile Plastic Septic Tank (Non-Plumbed)Ships in 48 Hours N-43522 500 Gallon 97″L x 48″W x 42″H OK, OH, NY $1,055.00
500 Gallon Below Ground Septic Tank – 1 Compartment N-41320 500 Gallon 101″L x 51″W x 42″H MN, WA, GA, UT $1,061.00
500 Gallon Spherical Pump Tank N-40785 500 Gallon 64″D x 64″L MN, OH, WA, CA, OK, UT $989.00
750 Gallon Septic Tank – 1 Compartment / 2 Manholes N-41814 750 Gallon 96″L x 48″W x 58″H NY $1,607.00
750 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) N-43495 750 Gallon 92″L x 60″W x 51″H MN, OK $1,559.00
750 Gallon 2 Compartment Plastic Septic Tank (Loose Plumbing) N-43499 750 Gallon 92″L x 60″W x 51″H MN, OK $1,671.00
750 Gallon 1 Compartment Plastic Septic Tank (Preplumbed) N-43520 750 Gallon 92″L x 60″W x 51″H OK $1,825.00
750 Gallon 2 Compartment Plastic Septic Tank (Preplumbed)Ships Soon N-43521 750 Gallon 92″L x 60″W x 51″H OK $1,845.99
1000 Gallon Norwesco Septic Tank – 1 Compartment / 2 Manholes ID, MT, NE, UT, WY, MI, MN, ND, SD, WI, CT, DE, PA, RI, VT, MD, ME, NH, NY, VA, WV, NJ, IN, KY, OH, MS, SC N-41718 1000 Gallon 102″L x 60″W x 58″H MN, GA, UT, NY, WA, OH, OK $1,785.00
1000 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes N-41720 1000 Gallon 102″L x 60″W x 58″H GA, NY, WA, OH, MN, OK, UT, CA $1,916.00
1000 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes CANADA N-41724 1000 Gallon 102″L x 60″W x 58″H MN, NY, WA, OH $1,973.00
1000 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) N-42405 1000 Gallon 127″L x 60″W x 51″H MN, OK, NY, WA $1,659.00
1000 Gallon 2 Compartment Plastic Septic Tank (Preplumbed)Ships Soon N-42406 1000 Gallon 127″L x 60″W x 51″H OK, WA $1,977.99
1000 Gallon 1 Compartment Plastic Septic Tank (Preplumbed) N-43496 1000 Gallon 127″L x 60″W x 51″H OK, WA $1,964.00
1000 Gallon 2 Compartment Plastic Septic Tank (Loose Plumbing) N-43517 1000 Gallon 127″L x 60″W x 51″H MN, OK, NY, WA $1,685.00
1250 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes CT, DE, RI, VT, MD, ME, NH, NY, VA, WV, AK, WA, PA N-41743 1250 Gallon 116″L x 55″W x 66″H NY, WA, OH, MN, OK, UT $2,337.00
1250 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes AZ, CO, NV, NM, CA, OK, TX N-41744 1250 Gallon 116″L x 55″W x 66″H CA $2,337.00
1250 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes CANADA N-41746 1250 Gallon 116″L x 55″W x 66″H MN, NY, WA, OH $2,410.00
1250 Gallon Norwesco Septic Tank – 1 Compartment / 2 Manholes UT, WY, MN, ND, NE, SD, WI, CT, DE, RI, VT, MD, ME, NH, NY, NJ, ID, MT, IN, KY, MI, OH, VA, WV, PA N-41741 1250 Gallon 116″L x 55″W x 68″H MN, UT, NY, WA, OH, OK $2,067.00
1250 Gallon 1 Compartment Plastic Septic Tank (Preplumbed) N-43497 1250 Gallon 157″L x 60″W x 51″H OK, WA $2,456.00
1250 Gallon 2 Compartment Plastic Septic Tank (Preplumbed) N-43501 1250 Gallon 157″L x 60″W x 51″H OK, WA $2,611.00
1250 Gallon 2 Compartment Plastic Septic Tank (Loose Plumbing) N-43503 1250 Gallon 157″L x 60″W x 51″H MN, OK, NY, WA $2,304.00
1250 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) N-43519 1250 Gallon 157″L x 60″W x 51″H MN, OK, NY, WA $2,159.00
1500 Gallon Norwesco Septic Tank – 1 Compartment / 2 Manholes N-41758 1500 Gallon 143″L x 55″W x 66″H MN, UT, NY, OH $2,675.00
1500 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes N-41760 1500 Gallon 143″L x 55″W x 66″H GA, NY, WA, OH, MN, OK, UT, CA $2,857.00
1500 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes CANADA N-41764 1500 Gallon 143″L x 55″W x 66″H MN, NY, WA, OH $2,942.00
1500 Gallon 1 Compartment Plastic Septic Tank (Preplumbed) N-43498 1500 Gallon 157″L x 69″W x 51″H OK, WA $2,880.00
Norwesco 1500 Gallon 2 Compartment Plastic Septic Tank (Preplumbed) N-43502 1500 Gallon 157″L x 69″W x 51″H OK, WA $2,903.99
1500 Gallon 2 Compartment Plastic Septic Tank (Loose Plumbing) N-43504 1500 Gallon 157″L x 69″W x 51″H MN, OK, NY, WA $2,725.00
1500 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) N-43518 1500 Gallon 157″L x 69″W x 51″H MN, OK, NY, WA $2,547.00
2000 Gallon Below Ground Water Holding Tank Cistern N-42559 2000 Gallon 126″L x 98″W x 53″H WA $4,657.00
2000 Gallon Below Ground Water Holding Tank Cistern N-44593 2000 Gallon 126″L x 98″W x 53″H MN, OH, OK $4,493.00
2500 Gallon Below Ground Holding Tank N-44079 2500 Gallon 159″L x 99″W x 51″H MN, OK, CA $5,177.99
2600 Gallon Underground Water Cistern Storage Tank N-43770 2600 Gallon 155″L x 98″W x 51″H MN $5,910.22
2650 Gallon Underground Water Storage Tank N-43771 2650 Gallon 155″L x 98″W x 81″H MN $6,394.00
3525 Gallon Underground Water Cistern Storage Tanks N-44390 3525 Gallon 211″L x 102″W x 51″H MN, CA, TX $8,437.99

500 Gallon Underground Septic Tank

Part 41320 of the Norwesco 500 gallon septic tank series is a one-compartment septic tank. It is mostly used for the storage of wastewater, as the name implies. This plastic septic tank is a lightweight, low-cost alternative to the traditional concrete septic tank. It is made of polyethylene. The rotationally molded polyethylene resin used in the construction of this 500 gallon septic tank is environmentally friendly. Its seamless design ensures that it is long-lasting and resistant to cracks, chipping, and rupturing.

  • The 500-gallon septic tank has a 20-inch gasketed manway for easy access.
  • In addition to a three-year manufacturer’s warranty, Norwesco offers a lifetime service agreement.
  • Plastic septic tanks are available in a variety of sizes ranging from 200 to 3,525 gallons in capacity.
  • Please contact our septic tank specialists if you have any queries or would like to discuss modification options.

Size Comparison

Dimensions 127″ Length x 60″ Width x 51″ Height Liquid Access 1 Inlet, 1 Outlet, 2 Manway / Lid Inlet 1 4″ Gasketed PVC Tee Assembly Outlet / Drain 1 4″ Gasketed PVC Tee Assembly Preplumbed Pre-drilled with loose GasketTee Septic State Approved Use Alabama, Arkansas, Arizona, Colorado, Connecticut, Delaware, Georgia, Iowa, Idaho, Illinois, Indiana, Kansas, Kentucky, Louisiana, Massachusetts, Maryland, Maine, Michigan, Minnesota, Missouri, Mississippi, Montana, North Carolina, North Dakota, Nebraska, New Hampshire, New Jersey, New Mexico, Nevada, New York, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Vermont, Washington, Wisconsin, West Virginia, Wyoming Shipping Locations Georgia, Minnesota, Ohio, Oklahoma, Utah, Washington Shipping Zip Codes 30224, 43130, 55375, 74801, 84074, 98671

Norwesco 1000 Gallon Septic Tank

Septic tank with a capacity of 1000 gallons CONVENIENCE OF INSTALLATIONFor septic system replacement and new house building, Norwesco’s polyethylene septic tanks are engineered for long-term durability as well as rapid and simple installation. Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model. This gives you the flexibility to install the tank when it is most convenient for you. DESIGNED AS A ONE-PIECE CONSTRUCTION WITH ROTATIONAL MOLDING Norwesco septic tanks are created using the rotational molding method, which results in a tank that is one piece, seamless, and waterproof in construction.

See also:  How To Pull Off The Plug On Septic Tank? (Best solution)

CHEMICAL RESISTANCE THAT IS OUTSTANDING Due to the fact that polyethylene is unaffected by soil chemicals as well as by the chemicals and gases inherent in sewage, Norwesco septic tanks will not rust or corrode and will not require any extra coatings, as would be required by other tanks.

A WATERTIGHT LIDNorwesco septic tanks are built with a watertight lid as standard equipment.

When the lid leaves our facility, it will be secured to the tank with stainless steel screws and will have a gasket between the lid and the tank as standard.

The gasket ensures a watertight seal around the opening of the lid. Before placing your purchase, please contact us to obtain a freight estimate.

1000 Gallon Norwesco Bruiser Septic Tank – 2 Compartment

  • Pre-plumbed with PVC tees and septic adapters already fitted
  • There is no requirement for a separate backfill. It is possible to use native soil
  • When supply of particular backfill combinations and water is difficult or impossible, use this product. During the first installation, there is no need to fill with water. Pre-plumbed
  • Accepts effluent filters up to 4 inches in diameter.

Important Note: No need to fill with water during initial installation.

Part IAPMO Ships from
41735 No MN, OH, GA, OK, UT, NY, WA
41820 Yes CA

Disclaimer: This tank is intended for usage below ground only.

State RequirementsApprovals

Our tanks must comply with a variety of health code standards that are in place across the United States. These codes are governed by the state or county in which you live, depending on your location. Please speak with your local health agency for assistance in choosing the tank you require.

Bruiser Septic Tank Standards:

  • Tank that has been rotationally molded into a single component that is seamless and waterproof
  • Neither soil chemicals nor sewage gases have an effect on polyethylene. Tanks made of polyethylene will not rust or corrode. Strict quality standards guarantee that the septic tank is safe for the environment. Connections to the plumbing system according to Schedule 40
  • Standard plumbing is something that all area installers or professionals are familiar with. Extensions for the risers are not included. Excellent shipping item that is virtually unbreakable.

Frequently Asked Septic Tank Questions

  • 1. Is it possible to put a bruiser septic tank beneath a driveway? No, placing a plastic bruiser septic tank beneath a driveway is not authorized and will invalidate the manufacturer’s guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. If you’re looking for bedding or backfill, a sand/gravel mixture (sometimes known as “pea gravel”) is a good option. (Please refer to the installation instructions above.) 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. 4. Is it possible to keep hot water in plastic septic tanks? Do not expose the tank to water temperatures more than 100 degrees Fahrenheit. The maximum storage temperature for polyethylene storage tanks is 120 degrees Fahrenheit. Containments with a temperature greater than 120 degrees Fahrenheit, even for a short period of time, might degrade the structural integrity of the tank and making it more prone to deformation and collapse
  • 5. How do you gain access to underground plastic septic tanks? Each underground plastic septic tank is supplied with manhole access hatches, which allow you to gain access to the tank (1 or 2 depending on tank). Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
  • Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save money on shipping. When you are notified that your tank is ready for pickup, Plastic-mart will offer you with a six-digit trip number that will allow you to come in and pick up your tank Monday through Friday from 8:30 a.m. to 2:00 p.m. Plastic-mart and the local producers are grateful for the chance to provide local pick-up as well as the collaboration necessary to ensure that the process is as efficient as possible.

1250 Gallon Plastic Septic Tank Norwesco 43503

The following items are included in the 2-compartment septic tank:

  • The following items are included: (2) 20″ manways
  • Loose gasketsTees (see video below for installation instructions)

Norwesco low profile septic tanks are constructed of a single piece of plastic. There is no extra assembly required. minimizing the amount of time and effort spent on installation

  • Septic tanks manufactured by Norwesco are one-piece construction. No extra assembly is required. time and effort saved during installation

Disclaimer: This tank is intended for usage below ground only. The following is the part number:

  • The tank is exclusively intended for usage below ground. Number of Pieces:

Installation Video:

  • Disclaimer: This tank is only intended for usage below ground. Part No. :

Norwesco 41721 1000 Gallon Two Compartment Yellow Septic Tank

Disclaimer: This tank is intended for use belowground only. Manufacturer’s Part Number:

SEPTIC TANKS

Disclaimer: This tank is intended for usage below ground only. The following is the part number:

PART NO. ALPINE PICKUP CAPACITY WEIGHT SPECIFICATIONS CHAMBERS
41820 $1,900.00 1,000 GALLON 403 lbs 102″L x 60″W x 63″H 2
41821 $2,700.00 1,250 GALLON 467 lbs 116″L x 55″W x 70″H 2
41822 $2,475.00 1,500 GALLON 589 lbs 135″L x 55″W x 70″H 2
62397 $100.00 Manhole Extension 15″H x 20″D
62396 $115.00 Manhole Extension 24″H x 20″D

The tank is exclusively intended for usage below ground. Number of Pieces:

PART NO. ALPINE PICKUP CAPACITY DIMENSIONS MANHOLE DIAMETER CHAMBERS
43522 $950.00 500 GALLON 97″ x 48″ x 42″ 20″ 1
44510 $1,695.00 750 GALLON 92″ x 60″ x 51″ 20″ 2
44482 $1,890.00 1,000 GALLON 127″ x 60″ x 51″ 20″ 2
44483 $1,975.00 1,250 GALLON 157″ x 60″ x 51 “ 20″ 2
44484 $2,755.00 1,500 GALLON 157″ x 69″ x 51″ 20″ 2
63833 $125.00 Manhole Extension 15″ TALL x 20″ D
63834 $135.00 Manhole Extension 24″ TALL x 20″ D

Disclaimer: This tank is only intended for usage below ground. Part No. :

PART NO. ALPINE PICKUP SPECIFICATIONS
63833 $80.00 15″TALL x 20″D
63834 $90.00 24″TALL x 20″D

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP GALLON CAPACITY WEIGHT DIM CHAMBERS
AST-0300-1R $550.00 300 Gallon Pump Tank 134 lbs 54″ x 56″ 1
AST-0500-1R $695.00 500 Gallon Pump Tank 197 lbs 63″ x 74″ 1
AST19212 $110.00 35 lbs Manhole Extension32.5″ x 16″

To see the PDF drawing, please choose the appropriate part number from the list below. TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP WEIGHT SPECIFICATIONS CHAMBERS
AST-0750-1R $915.00 259 lbs 60 x 70 x 60 1
AST-1000-2P $1,820.00 448 lbs 60 x 101 x 60 2
AST19212 $110.00 35 lbs Manhole Extension32.5″ x 16″

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING * TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.

PART NO. ALPINE PICKUP WEIGHT SPECIFICATIONS DIMENSIONS
AST19212 $65.00 35 lbs 16″ Access Extension – Black 32.5 x 16

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP COLORS CAPACITY WEIGHT DIM LID FITTINGS CHAMBERS
LP0300-HT $635.00 White 300 Gallon Holding Tank 132 56 x 95 x 16 6″ 3″ 1

NOTE: PLEASE CLICK ON THE PART NUMBER BELOW TO VIEW THE PDF DRAWING. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP CAPACITY MANHOLE SPECS
44079 $4,970.00 2,500 GALLON 20″ 159″L x 99″W x 51″H
44390 $7,075.00 3,525 GALLON 20″ 211″L x 102″W x 51″H
44876 $10,425.00 5,025 GALLON 20″ 211″L x 102″W x 73″H
63833 $125.00 Manhole Extension 20″D x 15″ TALL
63834 $135.00 Manhole Extension 20″D x 24″ TALL

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP SPECIFICATIONS
63833 $80.00 15″TALL x 20″D
63834 $90.00 24″TALL x 20″D

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE. TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

See also:  How Much To Get A Septic Tank Emptied? (TOP 5 Tips)
PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS
GBF0500 $900.00 500 72″ Diameter 55″ 2

TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT INLET A OUTLET B
GBF1250 $1,500.00 1,250 137″ 72″ 60″ 54″ 49″
*1250 Gallon Septic Tank is listed with IAPMO “A” = Measurement from the bottom of the inlet pipe to bottom of tank “B” = Measurement from the bottom of the inlet pipe to the bottom of the tank. Inlet and outlet pipes = 4″ SDR-35 P.V.C.

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE CENTER OF THE TABLE.

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS

TABLES SHOULD BE SCROLLED THROUGH BY SWIPING LEFT IF VIEWING ON A MOBILE DEVICE

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS
GBF2000 $3,235.00 2,000 144″ 84″ 84″ 2

TO SCROLL THROUGH THE TABLES ON A MOBILE DEVICE, SWIP LEFT FROM THE HOME SCREEN.

PART NO. ALPINE PICKUP GALLON CAPACITY LENGTH WIDTH OVERALL HEIGHT CHAMBERS

Norwesco Low Profile Single Compartment Septic Tank (Non Plumbed) – 500 Gallon

N-43522 is the model number. Manufacturer:Norwesco There are 500 gallons in this Norwesco Low Profile Single Compart Septic Tank (Non Plumbed) with a low profile and no plumbing.

In addition, because Norwesco Low Profile septic tanks are molded in one piece, there is no further assembly required, which reduces installation time and labor. The following characteristics are included:

  • Rugged, one-piece tank that is rotationally molded and does not have any seams to leak
  • Because there is no assembly necessary, installation time and effort are reduced. During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
  • A septic tank or pump tank that can also be used for non-potable water is suitable for this use. a single storage unit
  • There is no plumbing provided. 1 x 20 = 1 x 20 “Single compartment with a manhole
  • Dimensions: 97″ L x 48″ W x 42″ “174 lbs. in height
  • Norwesco tanks are required to fulfill a variety of health code criteria in the United States and Canada, as well as in other countries. These codes are governed by the laws of the state, county, or province in which you reside. We recommend that you speak with your local health agency for assistance in selecting which tank you require. Please keep in mind that tank variations can occur according on the model, fitting areas, and attachments
  • Therefore, images may not be completely accurate.

Attention Florida residents: According to Norwesco, because to the high water table in the state of Florida and state rules, TankAndBarrel.com is not permitted to send this tank into the state of Florida. DrawingsManuals Please keep in mind that the actual dimensions of all Norwesco tanks may vary by 1 percent to 2 percent from the claimed dimensions on the label. The Norwesco Low Profile Septic Tank, has a capacity of 500 gallons Detailed Installation Instructions for the Norwesco Low Profile Septic Tank Installation Instructions for a Norwesco Low Profile Septic Tank with Counter Buoyancy Pickup Locations for Customers The following are the Norwesco customer pick-up locations and addresses: Please keep in mind that customer pickup is available for a fixed price of $25.

  • Warranty information about Norwesco septic tanks: Failure to comply with the provisions listed below will result in the warranty being invalid.
  • Do not store them near an open flame or at temperatures above 180 degrees Fahrenheit.
  • Low Profile septic tanks should not be left vacant for lengthy periods of time.
  • Low-profile septic tanks and cisterns are exclusively intended for use as subterranean septic tanks and cisterns.
  • Low-profile septic tanks and low-profile cisterns may be used as holding tanks or for pumping purposes in accordance with municipal rules where permitted.
  • Protection from sharp things that might pierce the tank and produce a leak is step number three (G).
  • J.
  • The maximum size of a bulkhead fitting is 4″.
  • Such applications would violate the product’s warranty.
  • This standard limited warranty does not cover any losses caused by overuse, poor application of prescribed materials, accident, or faulty installation or maintenance of the equipment.

The buyer’s recourse under this warranty does not cover any other direct or indirect consequential losses that may arise as a result of flaws in the material and/or workmanship of the company’s goods.

Norwesco Septic Tanks

Our Norwesco spherical pump-out tank, which holds 300 gallons, is a popular type. Due to the fact that this tank arrives to us with neither an inlet nor an outlet, it is perfect for use as a pump-out septic tank at a cabin or workshop, a small house, or even a basement suite for a renter suite that will only be used on a periodic basis. The inlets and outlets on these are four-inch inlets with sewage tees, and the outlets are also four-inch. Thus, connecting to an existing field or becoming a part of the overall septic system is simple.

  • It’s simple to put together, it’s lightweight, and two people can easily hoist it into the back of a pickup truck and put it in place whenever you need it.
  • Typically, this is a pump-out chamber or a section of an existing septic field.
  • Alternatively, you may connect it to an existing field by installing a four-inch outlet and routing it to a different field for further distribution.
  • It will also be ideal for septic tank upgrades.

Our 1,000-gallon low profile two-chamber septic tank is our most popular piece …

. which we have on hand at all times. There are four-inch inlets and four-inch outlets included with this unit. In between, you have a 60-40 split for distribution, which ensures that all of your waste is adequately digested. Two people can easily lift and carry our 1,000-gallon tanks with a pickup truck, allowing you to install them at your convenience at any time. No matter how many people live in a house, our low-profile tanks hold 1,250 and 1,500 gallons and are suitable for six and eight-person households with permanent occupancy.

You will receive the 4-inch in and out, as well as all the sewer tees, which will be ready for connection to your current or new septic system.

Because these tanks are small and lightweight, we are able to send them anywhere in the world.

These tanks are manufactured in Alberta, which allows us to transport them quickly and easily to customers in Alberta, Saskatchewan, and Manitoba.

We also ship to and from the United States on a regular basis. Get in touch with us regarding these septic tanks, or any of our other tanks that we may have available, at 778-994-2107 or.

Norwesco buys RRM’s business in septic tanks

The largest rotating molder of septic tanks in North America has expanded its operations. Norwesco Inc. announced on September 19 that it had acquired the septic tank business of Rochester Rotational Molding Inc., which included a factory in Lakeland, Fla., with one huge double-shuttle machine and around 20 people. Norwesco will employ the molds from RRM’s headquarters facility in Rochester, Indiana, which will be moved to its factory in Washington Court House, Ohio, as part of the transaction.

With the addition of two rotomolding machines, RRM, which is owned by the husband-and-wife combination of Marilyn and Allen Wade, will continue to operate in its Indiana facility.

According to Marilyn Wade, a prominent industry activist who served as the Association of Rotational Molders International president in 2000, the company is now developing some of its own original goods in another line.

Even though Norwesco is a large company, it has yet to break into the Florida septic industry, according to Thomas Smith, president and chief executive officer of the St.

The above-ground portion of our business in Florida is significant, but the below-ground portion is minimal.” As a result, Rochester was the ideal purchase for us,” Smith explained.

Norwesco currently has 15 factories and more than 30 machinery as a result of the addition of the Florida operation.

In this case, he explained, “we’re looking for niches like this where we can go after a state or get some significant market share.’ The RRM Florida facility, which was the company’s second site, opened its doors in early 2004.

Because of its high water table, Florida is considered a difficult septic tank market to operate in.

Norwesco authorities are attempting to determine how to combine the septic tanks of Rochester and Norwesco.

There were no representatives from Norwesco or Rochester in attendance at the conference.

Accord to a list issued by Plastics News in August, Norwesco is the fifth-largest rotomolder in North America by production capacity. RRM was placed No. 57 on the list, with revenues of $5.7 million, although the company is well-known in the rotomolding industry.

Leave a Comment

Your email address will not be published. Required fields are marked *