- Luckily you can find the Tuf-Tite Septic Tank Risers at local septic tank wholesalers or even more convenient you can order them directly on Amazon. Check out the latest pricing on Amazon here. (Full disclosure this is an affiliate link, so if you purchase through it, Amazon will pay me a small commission.
How much do risers for a septic tank cost?
How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.
What sizes do septic tank risers come in?
Typical septic tank riser diameter is 24-inches but 30-inch, 16-inch and other riser diameters are available. Risers are sold in varying heights from 6″ and up.
Should I install a riser on my septic tank?
Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.
How many septic tank risers do I need?
A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.
Do they make square risers for septic tanks?
The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.
Should I bury my septic tank lid?
A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank.
How many lids are on a septic tank?
A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
Can you cover septic tank lids?
If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)
How deep should a septic tank be buried?
In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.
Can you pump a septic tank yourself?
Technically, you can clean a septic tank yourself. However, professionals do not recommend that you do so. A professional has the tools needed to properly pump your tank. A professional also has the knowledge and training to remove all of the waste from your tank and dispose of it properly.
How far apart are septic tank lids?
The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.
Septic Tank Risers, Lids, and Covers
The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.
Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
EVERYTHING else
THE POLYLOK SEPTIC TANK RISER ADVANTAGE
Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:
FACTORY INSTALLED GASKETS
The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.
INTERNAL STRUCTURAL RIBS
The Polylok risers are reinforced with structural ribs that run internally around each riser segment, providing them with exceptional strength and allowing them to maintain their shape even after the hole is backfilled with dirt. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.
LOW PROFILE RISER LIDS WITH HANDLES
The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.
LARGE TANK ADAPTER RING
It is necessary to use an adapter ring in order to attach risers to your septic tank.
We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!
STAINLESS STEEL SCREWS INCLUDED
At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.
Septic Tank Riser Kits – Wholesale Septic Supply
Are you fed up with having to dig up your septic system every time it has to be repaired or serviced? If this describes you, we have a fantastic option for you. In order to modify the way you operate on your septic system, you may require a suitable septic riser, which can be found online.
Why choose Tuf Tite Risers?
The Tuf Tite Septic Riser System allows you to get access to your outside septic system in a quick and simple manner. With the help of this revolutionary instrument, septic system service becomes a snap, and you will never have to dig up your septic system again! This system eliminates any guessing by providing you with the riser and other components you require to complete the task. Because you are ordering all of the essential parts in a single package, you will save both time and money on the installation process.
What are the Tuf Tite Product Specs?
Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.
Septic tanks are normally installed below the surface of the earth.
Installing a riser kit is the most effective approach to deal with this issue.
Tuf-Tite Septic Tank Riser, 24’x12′ – – Amazon.com
5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time!
Top reviews from the United States
On July 14, 2018, a reviewer in the United States of America verified that they had made the purchase. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time! 5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method.
The photographs in this review On December 30, 2017, a review was conducted in the United States. Purchase that has been verified This is an absolute must-have if you want to get to your septic tank quickly for maintenance. A 24 x 12 tank was installed.
Amazon.com : septic tank riser kit
Sketch was used to create this design. Sponsored SubscribeSave allows you to save even more money. Get it as soon as possible. Wednesday, March 2nd, $21.29 shipping With the SubscribeSave discount, the price is $19.77. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. Ships to the Netherlands are available. Only 16 of these items are left in stock – purchase soon. SubscribeSave allows you to save even more money. SubscribeSaveShips to the Netherlands allows you to save even more money.
- It’s yours.
- A 5% discount is applied at the time of purchase.
- SubscribeSave allows you to save even more money.
- SubscribeSaveShips to the Netherlands allows you to save even more money.
- Ships to the Netherlands are available.
- SubscribeSaveShips to the Netherlands allows you to save even more money.
- SubscribeSave allows you to save even more money.
- There is just one left in stock, so act quickly.
- Only 16 of these items are left in stock – purchase soon.
- Save 6 percent when you use this coupon
Septic tank riser kit Plumbing at Lowes.com
A leaking pipe is one of the most annoying things that can happen. When left ignored, they can become damaging over time, resulting in the need for costly repair work to be performed. However, with the appropriate expertise and the right plumbing gear, you can stop a leak before it causes extensive water damage that is expensive to repair. Identifying the Proper Fit Various pipe fittings will wear out over time and will need to be changed or repaired as a result. Lowe’s provides the pipe fittings you need for your project or repair, whether you’re looking for PVC or copper pipe fittings.
Large-scale projects or extensive repairs In some cases, you may require plumbing materials for more extensive repairs or replacements.
Best Price on Septic Tank Risers & Covers Online Guarenteed!
Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.
Risers from Tuf-Tite and Polylok are available for purchase. Tuf-Tite and Polylok are two of the most well-known names in this market, and both provide items of exceptional quality. PLEASE NOTE: Tuf-TitePolylok items are non-returnable.
What You Should Know About Septic Tank Risers
Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.
These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
What is Septic Tank Riser
If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.
Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
Given that septic tanks are often constructed many yards underground, and even the lids are just a few feet below ground level,
- Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you may save both time and money on future septic system maintenance.
The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?
Risers & Adapters « The Septic Store
Regardless of whether your septic tank is made of plastic or concrete, it will need to be pumped every 3-5 years. If your tank is underground, you will have to dig it out. By utilizing risers and tank adapters, you can elevate the lids of your concrete or plastic tank up to grade, making the tank accessible year-round for pumping, filter cleaning, and any other maintenance that may be required. Having a clog and backup in your tank in January is something you don’t want to happen to you.
Polylok Adapters
Tank adapters and adapter rings are available from Polylok for the conversion of concrete and plastic tanks.
It is possible to prepare your current tank for the Polylok riser system and lids by fitting the adapters on the tank’s existing risers. Available in two sizes: 20′′ and 24′′ in diameter.
Orenco AdaptersLids
In addition to concrete tank conversions, Orenco also provides solutions for plastic tank conversions. Their heavy-duty fiberglass adapters and lids are intended to operate with IPEX’s ultrarib or perma-lok pipe, which are both extremely robust and long-lasting.
EZset
Infiltrator Systems manufactures a product known as EZset. EZset not only serves as the principal riser system for Infiltrator’s brand of IM and TW series tanks, but it also provides tank adapters and lids for use when converting an existing concrete tank into a storage tank.
Premier Tech
Premier Tech’s tank adapter is one of the most substantial on the market. There are certain concrete tanks that have existing apertures that are bigger than the normal 30′′ tank adapter can handle.
Aeration Septic – Septic Tank Risers and Lids
Septic tank lids, risers, and covers are an excellent method to save time and money while also increasing safety around the septic system and preventing flooding. Installing septic tank lids and risers to bring access to your system up to code can save you the money you would otherwise spend on having your system dug up every time it has to be pumped. If you replace heavy concrete lids with lightweight yet sturdy and durable plastic lids that can be attached securely to protect the safety of children and dogs in the vicinity of the system, you may save your back.
Polylok Septic Tank Risers and Lids
12″ x 6″ Septic Tank Riser made of Polylok
- Extra strength is provided by heavy-duty structural rib reinforcing. Green opaque color for UV-Ray
- Molded warning signs that are clearly visible for safety
- Frost is prevented from clinging to frost prone locations by structural ribs on the interior.
Riser Lid for Septic Tank with Polylok 12″ Lid
- Surface that is skid resistant
- The highest level of UV protection currently available
- In order to dissuade unwanted entrance, square drive screws are used.
Septic Tank Riser Polylok 20″ x 6″ Polylok Septic Tank Riser
- Watertight and airtight
- Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction. Frost is prevented from clinging to frost-prone locations by structural ribs on the interior.
Septic Tank Riser Polylok 20″ x 12″ Polylok 20″ x 12″
- Watertight and airtight
- Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction.
Riser Lid for Septic Tank with Polylok 20″ Lid
- The surface is slip-resistant, and it has two recessed handles for simple removal. The most effective UV protection available
- In order to dissuade unwanted entrance, square drive screws are used.
The Polylok 20″ Heavy Duty Septic Tank Lid is made of polypropylene.
- Surface that is slip-resistant
- The most effective UV protection available
- It has a foam gasket to provide an airtight and waterproof connection. In order to dissuade unwanted entrance, square drive screws are used.
The Polylok Septic Tank Riser measures 24″ x 6″.
- Watertight and airtight
- Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction. Bring the septic access up to grade in no time
The Polylok 24″ x 12″ Septic Tank Riser is made of polyethylene.
- Watertight and airtight
- Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction.
Riser Lid for Septic Tank with Polylok 24″ Lid
- The surface is slip-resistant, and it has two recessed handles for simple removal. The most effective UV protection available
- In order to dissuade unwanted entrance, square drive screws are used.
Alternatively, you may phone us at 330-236-1561.
Tuf-TIte Septic Tank Risers and Lids
Tuf-Tite 20″ x 6″ Septic Tank Riser is made of polyethylene.
- Watertight and airtight construction
- Bring the septic access up to grade in no time
- Stackable
Tuf-Tite 20″ x 12″ Septic Tank Riser is made of polyethylene.
- Watertight and airtight construction
- Bring the septic access up to grade in no time
- Stackable
Tuf-Tite Heavy Duty Septic Tank Lid, 20″ in Diameter
- Air and watertight connection made possible by a foam gasket
- Heavy-duty, long-lasting structure
Tuf-Tite Septic Tank Riser (24″ x 6″ x 5″)
- Watertight and airtight construction
- Bring the septic access up to grade in no time
- Stackable
• Watertight and airtight construction Septic access may be easily raised above ground level. Stackable;
- Watertight and airtight construction. Easily raise the septic access to the surface of the ground
- Stackable
Tuf-Tite Heavy Duty Septic Tank Lid, 24″ in Diameter
- A foam gasket is used to ensure an airtight and waterproof connection. Heavy-duty, long-lasting structure
- Screws made of stainless steel are provided.
Tuf-Tite Domed Septic Tank Lid, 24″ in Diameter
- Screws made of stainless steel are supplied
- Two horizontal safety screws are also included.
Polylok Septic Tank Risers, Lids, & Accessories
Simple to install and provides easy access to the septic tank! Septic Solutions, Inc. recommends that you install our septic tank risers and lids on top of your existing septic tank to provide easier access for routine maintenance and cleaning. A septic tank mounting kit, septic tank adapter ring, septic-tank risers, and an appropriate septic tank lid or cover are required if you have an underground concrete septic tank system. The septic tank risers are available in a variety of heights and diameters.
Call Septic Solutions, Inc. immediately to place your order for septic tank risers and covers and save money. Please contact us at 1-877-925-5132 toll-free. These risers are available in six and twelve inch heights as well as diameters of 12, 20, and 24 inches. They
5 Reasons to Install Septic Tank Risers
Most homeowners consider their septic system to be a “out of sight, out of mind” service that receives little or no attention unless there is a problem. Septic systems are buried underground, and if you aren’t sure where your tank and its components are, it might be tough to discover your access ports or manhole covers if you aren’t familiar with your property’s layout. Septic tank risers are a straightforward, cost-effective solution to this problem that can result in significant long-term savings.
What is a septic tank riser and how does it work?
- The expense of installing a riser is one-time, but the advantages are long-lasting. The cost of the extension will be covered after it is completed, and your tank will be easier to access for pumping, maintenance, and inspections. Never again will you have to look for your access ports! When we put your manhole cover up to grade, it will be clearly visible at all times
- There will be no more digging! This is especially useful during the winter months, when digging out a buried manhole cover might take several hours and need specialized equipment. This is in addition to the mess that it can create in your yard if the lid is buried several feet down
- Nonetheless, it saves you money. Time is money, after all! Our staff can get your project done or your problem resolved faster when access to your septic tank is more convenient for them.
Are you ready to talk to us about septic risers and how they can make your next septic pumping job a whole lot easier? For a $20 discount, call 717-898-2333 and mention this article. We provide service to homes and businesses across Central Pennsylvania, and if you know your tank is due for a pumping, we can install your risers at the same time that your tank is being serviced.
