Where Can I Buy A Septic Tank Riser?

  • Luckily you can find the Tuf-Tite Septic Tank Risers at local septic tank wholesalers or even more convenient you can order them directly on Amazon. Check out the latest pricing on Amazon here. (Full disclosure this is an affiliate link, so if you purchase through it, Amazon will pay me a small commission.

How much do risers for a septic tank cost?

How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.

What sizes do septic tank risers come in?

Typical septic tank riser diameter is 24-inches but 30-inch, 16-inch and other riser diameters are available. Risers are sold in varying heights from 6″ and up.

Should I install a riser on my septic tank?

Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

How many septic tank risers do I need?

A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.

Should I bury my septic tank lid?

A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank.

How do you hide a septic tank riser?

The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.

How many lids are on a septic tank?

A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.

Can you cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

How deep should a septic tank be buried?

In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How far apart are septic tank lids?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

How do I find my septic tank lid?

You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.

Tuf-Tite Septic Tank Riser, 24’x12′ – – Amazon.com

5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time!

Top reviews from the United States

On July 14, 2018, a reviewer in the United States of America verified that they had made the purchase. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time! 5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method.

The photographs in this review The product was reviewed on December 30, 2017 in the United States and verified purchase This is an absolute must-have if you want to get to your septic tank quickly for maintenance.

  • You’ll never have to dig yourself out of a hole again.
  • Simple to set up.
  • We eventually painted the lid a brownish color to match the surrounding landscape, which was an option.
  • It was necessary to first install an adapter ring to the tank riser in order to adhere the risers to the septic tank, then an extra 24 x 6 riser to provide additional height, and lastly a 24 inch flat lid to complete the installation.
  • Furthermore, if your septic system requires maintenance in the winter, there will be no digging in frozen earth.
  • Made to be extremely durable.
  • On November 9, 2017, a review was published in the United States.

Fit well on a concrete septic tank and was simple to install.

While standing on top of the lid, the Putty Tape I used was strong enough to prevent it from bending or wobbling at all (210 ).

In my yard, I didn’t want a 24″ green lid protruding from the bushes.

The adapter ring and lid for the riser must be purchased separately from the riser.

I replaced the original concrete lids with a piece of plywood that was trimmed to fit and then sealed with Dicor self-leveling Lap Sealant to ensure that no toxic gas was trapped inside the risers.

On March 7, 2021, a review will be conducted in the United States.

The first one was excellent; it was a perfect fit for the flat lid and tank adapter ring (TAR).

Amazon issued a replacement, which arrived with the same oval watp as the original.

This lid will fit (barely), but I was unable to get the shape to fit into the TAR without the use of clamps (which do not fit into the hole when installing the risers) because of the form of the lid.

I like that Amazon makes it simple to exchange items, but yeesh.

Hopefully, the third replacement will be successful!

The two of them that I bought will be installed on my septic tank.

The second one arrived a few days later, but it was so deformed (it was in the shape of an oval) that it couldn’t be fitted into the TAR or lid.

I tested the riser with a tape measure and it measured more than 25 inches across at one point and less than 23 inches across the other axis.

In the image, you can see it after I used massive wood clamps to mold it into a spherical enough form to be placed on the TAR.

The lack of quality control and the oval forms of many risers have caused my project to be delayed by more than a week, according to my estimates.

The photographs in this review On June 16, 2021, a review was published in the United States of America.

It was quite difficult to put the cover back on.

To correct the oval problem, do the following: place the cover in place.

Fill the hole with earth, approximately 3″ deep all around, and pack it down with a 2×4 or something similar.

While it is being backfilled, the lid will keep it in place, and the soil (if correctly added slowly and packed evenly) will take care of the rest.

will assist in pushing them in a bit more.

Purchased in the United States on April 28, 2016 and reviewed on April 29, 2016Verified Purchase With the Tuf-Tite flat lid and TAR adaptor ring, this worked perfectly.

In six locations, I bolted the lid down with square head galvanized screws, then covered it with a few inches of dirt and grass.

See also:  How To Check If A Septic Tank Is Good? (Solution)

5.0 stars out of 5 for this product Not too shabby for a piece of plastic.

In order to keep the adapter ring from moving about, I used cement sealing caulk on the bottom lip and then quick dry cement around the bottom edge.

It worked out well and was built to last.

It is a full system that works effortlessly when put together.

For the money, he’s a little bit of a jerk.

I had hoped to have everything delivered so that I wouldn’t have to travel to the store to finish things off, but that didn’t work out as planned.

I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed.

5.0 stars out of 5 for this product If you don’t enjoy digging, this is a must-have.

I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

Everything arrived in record time, and the installation was straightforward. If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed. It makes life a whole lot simpler. The photographs in this review

Septic Tank Riser Kits – Wholesale Septic Supply

Are you fed up with having to dig up your septic system every time it has to be repaired or serviced? If this describes you, we have a fantastic option for you. In order to modify the way you operate on your septic system, you may require a suitable septic riser, which can be found online.

Why choose Tuf Tite Risers?

The Tuf Tite Septic Riser System allows you to get access to your outside septic system in a quick and simple manner. With the help of this revolutionary instrument, septic system service becomes a snap, and you will never have to dig up your septic system again! This system eliminates any guessing by providing you with the riser and other components you require to complete the task. Because you are ordering all of the essential parts in a single package, you will save both time and money on the installation process.

What are the Tuf Tite Product Specs?

Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.

  1. Septic tanks are normally installed below the surface of the earth.
  2. Installing a riser kit is the most effective approach to deal with this issue.
  3. When the riser comes into contact with the tank, an adapter ring should be used to seal the connection.
  4. A number of risers will be stacked on top of each other and the adapter ring until they reach the ground level, at which point they will be removed.
  5. This method will establish a barrier around the tank, protecting it from contamination while also making access to the tank more convenient.
  6. In order to ensure that the circular riser will fit around your square or rectangular access port, there are a few things you may do.
  7. The diagonal distance across the access will be the longest distance that a riser will have to cover before it may be used.
  8. Assume that “a” is the length of one side of the port’s access.
  9. For example, A is 12 inches in length and B is 12 inches in length.
  10. The equations shown above can be used to estimate the diagonal distance of a rectangle in a rectangular coordinate system.
  11. The only risers that should be utilized are those having an inner diameter that is bigger than the diagonal distance between the access port and the wall.

This approach will need the knowledge of the lengths of each side of your rectangular access port in order to work. Pythagorean theorem is something you may remember from your geometry training.

Septic Tank Risers, Lids, and Covers

The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.

  • Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
  • ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.
  • No.
  • Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
  • It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.
  • IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
  • If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
  • Yes.
  • IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS?
  • The Polylok Septic Tank Risers are assembled using stainless steel screws that allow them to be connected to one another.

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight!

Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

The Polylok risers are reinforced with structural ribs that run internally around each riser segment, providing them with exceptional strength and allowing them to maintain their shape even after the hole is backfilled with dirt. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

See also:  How Many People Can A 3 Tank Septic? (TOP 5 Tips)

LARGE TANK ADAPTER RING

It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

STAINLESS STEEL SCREWS INCLUDED

At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.

Septic tank riser kit Plumbing at Lowes.com

A leaking pipe is one of the most annoying things that can happen. When left ignored, they can become damaging over time, resulting in the need for costly repair work to be performed. However, with the appropriate expertise and the right plumbing gear, you can stop a leak before it causes extensive water damage that is expensive to repair. Identifying the Proper Fit Various pipe fittings will wear out over time and will need to be changed or repaired as a result. Lowe’s provides the pipe fittings you need for your project or repair, whether you’re looking for PVC or copper pipe fittings.

  1. Large-scale projects or extensive repairs In some cases, you may require plumbing materials for more extensive repairs or replacements.
  2. Our Water Heater Buying Guidecan assist you in determining which water heater is the best fit for your needs.
  3. Troubleshooting Your Toilet Issues When it comes to plumbing problems in the home, one of the most frequently encountered is with the toilet, which is one of the most frequently used appliances.
  4. In some cases, more than a plunger is required to solve the problem.
  5. We also have whole toilet repair kits available, as well as individual toilet components such as flappers, chains, and levers.

Plumbing problems may take up a lot of your time and money, and they can be quite inconvenient. The tools and skills you’ll need to address issues and complete projects correctly the first time are available at Lowe’s.

Best Price on Septic Tank Risers & Covers Online Guarenteed!

Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.

  1. Risers from Tuf-Tite and Polylok are available for purchase.
  2. Please keep in mind that Tuf-TitePolylok products are incompatible with one another.
  3. Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true.
  4. PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK

The benefits of septic tank risers

Installing septic tank access risers will save you money as well as your back. Accessing the septic tank is made simple by the use of rippers. | Photo courtesy of the Michigan State University College of Agriculture and Natural Resources The process of finding and pulling up the lid to your septic tank may be time-consuming and frustrating. In many cases, homeowners aren’t even sure where to begin their search for the lid to their septic tank. Some people are just unable to pull themselves out of a hole.

  • What method do individuals use to locate the buried treasure that is their septic tank lid?
  • Others look for a clue, such as a dead spot of grass or other visual signals, to help them find their way.
  • Whatever way you choose, digging it out is still necessary, and if the correct location cannot be discovered, another hole must be excavated.
  • Some counties, such as Kalamazoo, Oakland, and Otsego, mandate that septic tank access risers be erected; these are just a few examples.
  • Contact your Michigan County to find out about the most recent onsite waste water rules that apply to you.
  • A septic tank riser is a pipe that can be built of plastic, fiberglass, or concrete to carry waste away from the tank.
  • The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.

It goes without saying that any modifications to your septic tank or system will need to be approved by your county environmental health department or another qualified inspector.

You may arrange the installation of a riser in your septic system to coincide with your usual septic system maintenance schedule.

It is also possible that having a riser in place will dramatically lower the overall cost of septic tank maintenance over time, owing to the increased ease of access and reduced time spent on the operation.

MSU Extension Educator Beth Clawson can provide further information on the onsite waste water systems you may be interested in.

The Michigan Department of Natural Resources has a team of natural resources educators working to provide aquatic invasive species instructional programming and support throughout the state.

You can reach out to an educator using MSU Extension’s ” Find an Expert ” search engine by searching for “Natural Resources Water Quality” in the keywords field. Resources:

Did you find this article to be informative?

You Might Also Be Interested In

Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.

  • These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
  • What Are the Advantages of Using Risers?
  • Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
  • The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
  • The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
  • For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
  • Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.

Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.

Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.

This allows for the installation of the pump and riser to be completed in a single step.

Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.

A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.

We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

  • Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
  • Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.
  • The installation of a septic tank riser is a cost-effective solution to this issue.
  • The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.
  • Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
  • And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.
See also:  How To Thaw Out A Frozen Septic Tank? (TOP 5 Tips)

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?

What is a Septic Tank Riser?

  • A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
  • Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.

Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. If you’re a homeowner in the United States who relies on a septic tank, you’re probably aware that they’re buried deep in the earth and can be difficult to detect and access when it comes time to do maintenance on them. As a result, you may be required to pay substantial digging and labor fees. With a septic tank riser, you can now find and manage your septic system more rapidly, which will allow you to put more money back in your pocket as a result.

What Is a Septic Tank Riser?

As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn.

The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.

The Benefits: How Septic Risers Save You Money

As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years. However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.

No Digging Fees

You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank. Your septic tank will need to be recovered with earth once it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.

Reduces Labor Costs

Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.

You’ll Only Pay for Materials and Labor Once

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.

Septic Tank Riser Styles

Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.

Concrete Septic Tank Risers

Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:

  • Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
  • Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection

Plastic Septic Tank Risers

Purchased at a high price and difficult to install Over time, it becomes more prone to corrosion and cracking. Lifting and maneuvering during installation or inspection will incur additional labor charges.

  • Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
  • They may be covered with sod to improve their looks
  • It is not susceptible to cracking like cement. Plastic is resistant to erosion.
  • It is possible to crush it beneath the earth
  • However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.

How Much a Septic Tank Riser Costs

Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.

Installation Usually Requires a Plumber

In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.

They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.

Leave a Comment

Your email address will not be published. Required fields are marked *