What Would Clean A Septic Tank Pipe? (Solved)

Simple Cleaning Agent — White vinegar is a better option, providing a natural cleaning agent that can help keep septic drains free from mold growth and odor. It is recommended that you pour one cup of vinegar down the drains weekly and let it soak for about a half hour, then flush it through the system with water.

• Cleaning septic pipes requires use of a bacterial digestant with enzymes, which together can digest waste material continuously. Routine monthly pipe cleaning treatments allow the bacteria to grow and live in the material and continue to digest organic matter that clings to the interior walls of the drain.

How do you clean septic drain lines?

Flush Your Lines If you aren’t dealing with a clog, you can clean your lines by flushing them with water. While doing this, put a little bit of drain cleaner into the water. A toilet is a great place to do this, as it allows a lot of water and cleaner to go down together. If you have a clog, this is not a good idea.

What is the best sewer line cleaner?

Best Overall: Drano Max Gel Clog Remover This commonly recognized product is popular for good reason—it’s a great all-around drain opener that’s effective and affordable, to boot. Drano Max Gel Clog Remover comes in 80-ounce bottles, and it’s safe to use on PVC, metal pipes, garbage disposals, and septic systems.

How do I know if my septic line is clogged?

Stay vigilant for five signs your drainfield does not drain correctly anymore.

1. Slowing Drainage. Homeowners first notice slower than usual drainage from all the sinks, tubs, and toilets in a home when they have a compromised drainfield.
2. Rising Water.
3. Increasing Plant Growth.
4. Returning Flow.
5. Developing Odors.

What do lateral lines look like?

Lateral lines are usually visible as faint lines of pores running lengthwise down each side, from the vicinity of the gill covers to the base of the tail. Most amphibian larvae and some fully aquatic adult amphibians possess mechanosensitive systems comparable to the lateral line.

How do I clean the sludge out of my sewer line?

Mix 1/3 of a cup of vinegar with 1/3 of a cup of baking soda and pour the fizzy mixture into the clogged sewer drain immediately. If you don’t know how to unclog main sewer line, take advantage of vinegar to eliminate the grime, grease, and hair in the pipe. Flush the pipe with hot water after one hour.

Will Coca Cola unclog a drain?

Coke or Pepsi are great for vanquishing a clog! Coke and Pepsi are loaded with phosphoric acid, which breaks down buildup that can clog your drains! Phosphoric acid can even remove lime scale and other tough buildup that regular cleaners struggle with.

How do you clear a clogged sewer line?

Try pouring hot water down the drain, then follow it with one cup of bicarbonate of soda and a cup of vinegar. Leave it for ten minutes, then chase it with more hot water. A combination of the hot water and the natural cleaner mixture can break blockages up.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

1. Install an aeration system with diffused air in your septic tank.
2. Break up any compacted sludge.
3. Add a bio-activator or microbe blend.
4. Maintain the aeration system.
5. Add additional Microbes as required.

How to Clean Pipes That Have a Septic System

Construction of new residences in rural locations or in places that are not served by a municipal sewer system necessitates the installation of septic systems. It will be necessary to take into consideration the considerations and laws outlined above when installing a system in a new house building. A number of new houses have been built using Jones PlumbingSeptic Tank Service’s septic systems, and we are happy to assist you with the application and permitting process, as well as professionally installing the system.

1. Drain or flush one gallon of boiling water down the drain or down the pipe, which will kickstart the cleaning process by killing mold and mildew spores and loosening any built-up material and residue that has accumulated on the interior of the pipe. Pour one cup of baking soda into the pipe and allow it to settle for a few minutes before flushing with water. baking soda is a natural cleaning agent that not only cleans but also deodorizes, removing the unpleasant smell that pipes might emit from time to time. Pour 2 cups of white vinegar into the pipe slowly and steadily. As the vinegar and baking soda react, a bubbling fizzing activity will be created, which will fill the pipe and force the muck that has accumulated on the interior of the pipe to the surface. Make it possible for the baking soda and vinegar to work within the pipe by refraining from using it for at least an hour. This will allow the combination to make its way entirely through the pipe, cleansing and destroying mold and mildew totally out of the pipe. In a gallon of boiling water, combine 1 cup white vinegar with 1 gallon of water and gently pour down the pipe to thoroughly rinse out the interior of the pipe and to treat it with more of the vinegar’s natural antibacterial characteristics

Tip

1. Using this natural and pH balanced cleaning procedure, you won’t have to worry about damaging your septic system or filling your house with toxic odours.

How to Clean a Septic Tank

Article in PDF format Article in PDF format Getting your tank filled is something you should prepare for. You may rely on us to assist you with the cleaning procedure! Unless properly maintained, septic tanks can get clogged with solids that are incapable of being broken down by bacteria, which can result in a costly systemic collapse. In order to maintain your tank clean, it is necessary to have frequent inspections and pumps performed on a regular basis. We’ll teach you how to uncover and clean your tank in this post, however you’ll need to hire a professional to pump the trash out.

1. 1 Locate your tank. It is best to begin with the sewage pipe at the lowest level of your home if at all feasible. Follow the path it takes out of the house after it’s out of the house. It’s possible that your tank is buried in the ground. Identifying the tank now will save you time and money later on, regardless of whether you or an inspector clean the tank. 2 Remove the tank’s top by digging it out. It’s possible that your tank is buried underground. Take a shovel and clear away the dirt from around the top of the tank before the examination begins. Your tank will have an access port lid, which should be sturdy and well-secured when closed.

• Risers can be placed on top of the tank for increased stability. These assist you in locating and gaining access to the tank without the need to dig. These can be added by septic system pumpers.

• Advertisement
• s3 Cracks should be checked on the tank. Damaged areas should be checked all the way around the tank, including the inside. Cracks must be fixed by a professional once the tank has been pumped in order to prevent the system from failing. Keep an eye out for any corroded or damaged sections on the inlet and outlet pipes that are necessary for drainage. If your tank is equipped with a distribution box or a pump chamber, make sure everything is in working order.

• In order to determine whether or not water from your home, such as from the toilet or washing machine, makes it into your tank and subsequently drains effectively, it is helpful to run some water from your home.

1. 1Make a slit in a pipe. Begin with a ten foot (3 m) length of PVC pipe. Separate it into two sections: a six inch (15.24 cm) segment and a nine and a half foot (2.9 m) section, using a saw or PVC cutter
2. 2 Glue the pipes together as a group. PVC cement should be poured into the elbow joint. Using the cement and joint, attach the smaller pipe to the top of the bigger pipe. A straight pipe will protrude straight to the right or left in a “L” configuration
3. 3cap both ends of the pipe. PVC caps may be purchased at the same hardware shop where you purchased the pipes, cement, and cutters. 4 Attach the caps to the pipes so that they are tight and prevent water from flowing through them. Insert the stick into the hole as far as it will go. Assemble the scum stick by holding it in a “L” form with the smaller pipe at the bottom and facing out to one side. Reduce the pipe’s diameter until it can be held against the top layer of septic tank waste without breaking through
4. 5 lowering the pipe Make a mark on the stick. Make a mark on the scum’s top point with a marker or a piece of masking tape. When the pipe is resting on top of the scum layer, make a mark at the point where the pipe spans from the ground to the very top of your tank
5. 6Push through the scum layer until the mark is no longer visible. Push the stick all the way through the muck. Some people find it necessary to twirl the stick so that the pointed end bursts through. When you get to the bottom of the scum layer, you’ll see that the stick is traveling through water rather than through the resistive fat and oil layer. Continue to hold the stick against the bottom of the scum in the same manner as you held it against the top of the scum, keeping the smaller pipe flat and off to the side so that the stick takes on the shape of a “L”
6. 7 Make a second mark on the stick. Once again, a marker or tape should be used to designate where the scum layer terminates. Make a mark at the point where the pipe crosses the ground and enters the tank’s very top
7. Eight Measure the distance between the markers. Carefully remove the stick and place it on a tarp to catch any drips. Make a note of the distance between the two marks you created and use a tape measure to measure it. This represents the depth of the scum level. When the fat and oil layer reaches barely three inches (7.62 cm) above the bottom of the exit pipe, the tank must be pumped to remove the remaining liquid. Advertisement

1. 1Make a slit in a pipe. Partition a ten-foot (3-meter) length of PVC pipe into five-foot (1.5-meter) portions. In order to construct a secure two-part stick, glue the pipes together as shown in the diagram. Connect the two pipes together using a straight adaptor or a threaded coupler from the hardware shop, as shown. PVC cement should be used to secure the ends in the connection
2. 3cap each end. PVC caps are also available at your local hardware shop. Put one on either end of your stick and twist them together. It should be tightened so that no sewage may enter the pipe
3. 4 Wrap a piece of white cloth around one end of the stick. A white cloth, towel, sock, or Velcro can be used to make a mark on the sludge to indicate the level of the sludge. Wrap the material around one end of the pipe for up to three feet (.91 m) or the whole length of the pipe, whichever is shorter. 5Push the stick through the scum hole after securing the material with the Velcro backing, tape, or string. You can drill a hole in the top layer of the tank with a stick designed for testing its scum depth if you haven’t previously done so. Then drop the sludge stick through the opening until you feel it hit the bottom of the tank
4. 6remain in position for three minutes while you do this again. Allow for a minimum of three minutes of resting time on the stick. The longer you keep the stick in your hand, the more likely it is that the sludge will stain your white material
5. 7Remove the stick from your hand. Continue to bring the stick back up, keeping it steady as you pull it up through the hole you formed earlier in the process. You will not discolor the stick as long as you do not move it. Prepare the stain by spreading it out on the ground where it will not be ruined and where you will be able to wipe the stick afterwards
6. 8Measure the stain. Make a note of the length of the stain starting from the bottom of the stick with a tape measure. In order to prevent the sludge or scum from occupying more than one third of the tank’s depth (approximately 12 inches or 30.48 cm high), the tank must be pumped. It is necessary to pump the tank if the sludge layer is within six inches (15.24 centimeters) of the bottom of the output pipes. Advertisement

1. 1 Remove the cap from the tank. During your yearly checkup, lift the tank’s lid to have a better look inside. Remove the lid and look for the pipes that lead to the waste tank and the pipes that lead to the water supply. The baffles are contained within them, and they keep scum and sludge in place.

1. 2Remove the filters from the machine. Put on a pair of rubber gloves for protection. Reach inside the outlet baffle using your hands, a rake, or a hoe to remove the obstruction. Take the filter out of the machine. Even though it may be brightly colored and have a handle on the end, if your tank has one, it will be located inside the outflow baffle. 3Rinse the filter thoroughly. Holding the filter over the intake side of the septic tank and spraying it with a hose or dipping it in a pail of water are both options. Check to see that all of the solids have fallen back into the tank or bucket. Fill the tank with any waste that has accumulated once you have done rinsing
2. Inspect the filter for signs of wear and tear. Examine the filter for any cracks or particles that may be obstructing it. When the filter is not cleaned on a regular basis, it becomes clogged and ceases to function. It is recommended that you replace the filter if it is not cleanable or looks to be damaged. Looking around the edges of the filter is important whether you are putting the old filter back in or installing a new one. It’s possible that the filter has an arrow on it. Ensure that the filter is correctly installed so that the arrow points downwards into the drainage system. When the filter is securely seated in the baffle, replace the tank’s lid with a firm grip. Advertisement

1. 1 Pump the tank once every several years or as needed. Many individuals make the mistake of assuming that the tank does not require treatment as long as the piping looks to be in working order. It is possible to save thousands of dollars in costly repairs by doing regular maintenance on your tank before sludge builds up and liquid drains cease to flow. Every one to three years, or whenever the sludge and scum levels have occupied approximately one-third of the tank’s volume or have approached the exit pipe, this should be performed.

• The smaller the tank or the greater the number of people served by the tank, the more frequently it will need to be cleaned. A 750-gallon tank, which is normal in a two-bedroom home, will sustain two people for around four years if they do not pump it. With just four inhabitants, it will survive less than two years without pumping
• Annual treatment will maintain the tank clean and allow any issues to be addressed before they become catastrophic septic failures at a cost of a couple hundred dollars
• And

1. 2Clean up the garbage. Pumping is accomplished by the use of a cast-iron pump that can be turned on and off. The pump takes out the particles that are unable to be broken down by bacteria and transports them to a holding container, such as the inside of a tanker. If you remove the sludge and scum, there is no need to add bacteria or water into the system. Waste disposal for septic tanks. Even if you attempt to pump out the tank on your own, you must dispose of the trash in accordance with local regulations. The trash must be transferred by tanker to a place determined by the government that is distant from water and locations where people congregate. As a result, it is preferable to leave it in the hands of a specialist. Advertisement

Create a new question

• Question For what reason is it risky to clean up a septic tank? David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberExpert Sewer gas, which is prevalent in septic systems, has the potential to be lethal. It’s a quiet murderer that kills in a matter of minutes, therefore I strongly warn homeowners never to attempt to repair their own septic system. Employ the services of a professional to ensure your safety.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

• Every one to three years, have your tank examined and pumped out by a professional. A little amount of money spent on regular maintenance is preferable to dealing with a septic system that isn’t functioning properly. Higher water use, such as when numerous people reside in the house or when you use a hot tub, causes the tank to fill up more quickly. Non-waste items such as baby wipes and grease should not be disposed of. These clog the system and cause it to malfunction.

Advertisement

• Children have been seen to fall into tanks. Make certain that the lids are robust and that they are securely fastened. Septic tanks are extremely risky to enter and operate. The wastes in the tank emit very toxic vapors, which fill the tank. Work with a companion and keep a safe distance from the entrance

Advertisement

Things You’ll Need

• A shovel, two ten-foot (3-meter) PVC pipes, a PVC cutter or saw, PVC cement, a PVC elbow joint, a PVC connector, and four PVC end caps A white cloth, a sock, or Velcro is recommended. Tarp, measuring tape, hose and bucket, baffle filter, etc.

About This Article

Summary of the ArticleX Maintaining the cleanliness of your septic tank will save you money on costly repairs down the road. Annual filter cleaning and tank pumping are required to keep your septic tank in good working order, but you may save money by doing it yourself. Generally speaking, your filter will be positioned in the tank’s exit baffle and will be brightly colored. Cleaning it is as simple as spraying it with water from the tank or submerging it in a pail of clean water for an hour or so.

The sludge and scum levels in your tank should be pumped out every one to three years, or whenever they reach a third of the total capacity.

Continue reading for additional information, including how to measure the sludge and scum depths in your septic tank.

Thank you to all writers for contributing to this page, which has been read 69,717 times so far.

Did this article help you?

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

If you need to get to a clog that is further inside a pipe, you might want to consider utilizing a mechanical auger to cut through it. Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.

• Check the inflow pipe by lifting the access cover of the tank nearest to your residence. The plastic or concrete cover in your yard that is closest to your house is the one to look for. You may now have a look inside by carefully lifting the cover up and off the tank. Look for the end of a white or green pipe that is on the side of the tank that is closest to your home and see if anything is obstructing it. The clog could be the source of the problem, if this is the case.

• Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.

• If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.

• Advertisement
• s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.

• Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.

• 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.

• If at all possible, take a shower or bath as soon as possible after working on your septic tank
• When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.

• 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.

• Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.

• 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.

• Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.

1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.

• If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.

• 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.

• It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price

• 3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.

• It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.

• 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it

• If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.

• Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.

• Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. 5 Prior to removing it from the pipe, turn the auger off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the hole. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to complete the cycle. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become attached to the end.

• 6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished

• Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.

1. 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement

1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.

• Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.

• As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
• 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.

• It will also save you money on your utility bills if you keep your water consumption to a minimum.

• 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.

• Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.

• 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping

• Not every septic system will be equipped with an effluent filter
• However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.

1. 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement

Create a new question

• Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
• Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
• Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
• They are available.

Question The location of your septic tank is important to know. David Balkan is a writer and musician from the United Kingdom. Professional PlumberCEO of Balkan SewerWater Main Construction David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other roles. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines.

1. It is because of his expertise and solution-oriented attitude that Balkan Sewer and Water Main Service has grown to become the largest and most trusted service in New York City, and he was named to Angie’s List’s 2017 Super Service Awards list.
2. The quickest and most straightforward method is to find your primary house trap or clean out.
3. The equipment that experts employ are available once you have identified your primary cleaner or trap.
4. Excess Rid X will have no negative consequences.
5. The Kirbys (Daniel and Robin Kirby) provided the community response.
6. Consequently, your field lines will be inundated as a result of the water sitting directly on top of them.
7. This problem may be solved by building up an artificial hill at the field line and sloping it down to normal grade for about two feet on both sides of the field line.

Many years of experience were evident in the man who performed septic system maintenance on our property.

When I buy the store brand (79 cents a packet), I only have to flush a handful of packets every month.

Question What is the best product to use in the toilet to protect my septic system from harm?

This is due to a shortage of oxygen in the tank.

Although this is the case, treatment plants should be pumped out at least once every three months rather than once every six months.

A plastic drain snake is what I choose to utilize for my own purposes.

While they are inexpensive and quite effective, they are also a bit dirty.

The septic system should not be polluted with grease or oil.

Using a grease can, collect the waste and dispose of it properly. Regarding bleach, it destroys the microorganisms that your septic system requires to decompose the waste it receives. Look into septic-safe cleaning products if you haven’t already;

• Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Advertisement

Things You’ll Need

• Advertisement

About This Article

The writers of this page have together authored a page that has been read 315,143 times.

Did this article help you?

The writers of this page have collaborated to create this page, which has been read 315,143 times so far.

In This Article

• Is It Possible to Save It?
• The Pressure Washer Approach Incorporating Biological Additives into Septic Tanks
• Installing an Aerator

If your septic system has begun to malfunction despite regular tank pumping and proper routine maintenance, it’s probable that your drain field has begun to malfunction. Sometimes a drain field problem may be repaired, while other times it cannot be repaired. Despite the fact that you can try to clear up your field lines in the hopes that a clog is the source of the problem, you may find yourself in the midst of a more significant situation. Professional evaluation of your system and recommendation of the best course of action is always a good idea.

1. The first is that it is only intended to be used for a limited period of time.
2. Following that, it’s normal for the drain field to require extensive repairs or maybe replacement entirely.
3. As the waste accumulates, it hardens into a thick sludge that is nearly impenetrable by water, so impairing the capacity of the drain field to drain correctly.
4. If you are experiencing any of these issues, cleaning up your drain pipes will not provide a solution.
5. At times, it is effective; at other times, it is not.

The Pressure Washer Approach

When it comes to cleaning up drain field pipes, a frequent method is to utilize a high-pressure water jet. Sewer jet devices, such as the Clog Hog, attach to a gas or electric power washer and then feed into the pipe, clearing away any obstructions or buildup. This particular cleaning process may be approached from two different perspectives. The recommended technique is to locate and expose the downhill end of the drain field pipes, after which you may feed the water jet backward via the drain field pipes.

If you choose to take this path, some sludge will come out of the pipe and into the distribution box, and you will need to remove it.

Biological Additives in Septic Tanks

Water from your septic tank has a high concentration of germs that break down solid debris. Most of the time, the bacteria in your septic tank is sufficient to complete the task at hand. In contrast, a rise in septic usage might lead the bacteria to “fall behind,” causing them to be unable to digest the waste at a fast enough rate. If you use some home cleansers or chemical drain openers, you can also destroy some of the microorganisms in your tank. If you’ve made a mistake and introduced harmful bacteria into your septic system or drain field, replacing them with an additional solution can help to rectify the situation.

Septic systems rely on beneficial microorganisms to aid in the digestion of the particles present in wastewater.

Aerobic septic systems provide oxygen to bacteria, allowing them to function more efficiently than other types of systems.

Addition of aeration after the fact is a possibility in the case of an anaerobic system.

Because wastewater is cleaner when it reaches the drain field and is less prone to clog, a well-designed system can reduce dependency on the drainage system. The added bacteria may also aid in the digestion of any sludge that may be obstructing your drain field.

How to Clear a Clogged Septic Line

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

Clogged Drain or Clogged Septic Tank?

Robs Septicon is the author of this piece. Postings under Uncategorised A blocked septic tank can cause difficulties that are quite similar to those caused by a clogged drain. Knowing the difference between the two might assist you in taking care of your house. Here’s all you need to know about the situation. When a septic tank overflows, why do drains become clogged? The septic tank is a holding tank that is located underground. All of the wastewater from the house flows into the septic tank, which steadily fills up with garbage over time.

1. Towards the top of the tank, there is a pipe that flows into the yard, into an area known as the drain field, where the tank is located.
2. The dirt filters the water and kills the bacteria that are there.
3. It is possible for the septic tank to fill up without any water draining out if the line feeding into the drain field becomes plugged.
4. As the water rises via the main line, the capacity of fixtures in the house to drain correctly diminishes.
5. The drains will become sluggish if the septic tank is just half blocked, as the water strains to make its way down into the septic tank.
6. What Are the Signs of a Septic Tank Clog?
7. It might be difficult to detect the difference at times.

Due to the fact that they are the most closely associated with the septic tank, the lower drains in the home will be affected first when the septic tank overflows.

In addition to being more sluggish, they may begin to produce unusual noises, such as gurgling sounds, as they age.

Local clogs often only impact a single fixture or a small number of fixtures that are linked to it.

If all of the other fixtures in the house are operating properly, this is an indicator that there is a blockage in the house rather than in the septic tank itself.

A blockage in a septic tank should not be repaired by someone who has just rudimentary expertise or who lacks the necessary instruments.

In certain cases, you may be able to address the problem yourself if you suspect that the blockage is in the pipe rather than in the septic tank.

Allow for an hour or two for the mixture to settle in the pipe before using it.

Depending on how large the blockage is, this may be sufficient to empty the pipe.

An auger is made out of a long, rigid cable with a pointed, twisting end at the other end.

A plumber may be required if neither of these approaches proves effective in clearing the clog from the drain.

Chemical drain cleaners have the potential to harm beneficial microorganisms in your septic tank, which might lead to another clog in the future.

Clogs in septic tanks can arise for a number of different causes.

Many septic tanks require pumping every three to five years, depending on the size of the tank.

Exactly What Should You Do If You Suspect You Have a Septic Tank Issue?

An inspection by a septic tank firm will allow them to determine whether or not the tank needs to be drained.

Rob’s Septic Tanks, Inc. can provide you with further information on clogs and septic tanks. We’ll be pleased to answer any questions you have and provide you with further information.

How to keep drain lines and septic tanks working well

Q:I just relocated from a house that was connected to the municipal sewer system to a rural retirement home that is connected to a septic tank. What information can you provide me on septic tanks? At my previous residence, I experienced clogging difficulties in my main drain pipe. What are some best practices to follow when it comes to drain lines in a home, and how can one ensure that they are always in good working order? A: Your drain lines should generally be free of obstructions as they transport water and solid waste to the sewer or septic tank, presuming they have been constructed correctly and with the appropriate degree of slope.

1. Even though some people believe that having more slope is preferable, if you have too much slope, the liquids can outpace the particles as they go down the drain lines.
2. Grease is the most difficult problem that municipal sewage workers and septic-tank pumpers have to deal with, and they would probably agree.
3. You’ll be doing them — and yourself — a favor in the long run.
4. This will aid in reducing the amount of grease that enters your plumbing drains and pipes.
5. In certain cases, items containing active bacteria may be purchased, which will begin to consume the grease that may be covering the insides of your pipes.
6. When it comes to keeping my own drain lines running, I do a couple different things.
7. Upon entering the pipes, this water causes a violent flash flood — particularly in the horizontal drain pipe beneath my basement floor — and will carry almost everything out of the pipes.

Using hot water to dissolve grease is a very simple procedure that may be used instead of purchasing a bacteria product that consumes grease to accomplish the same result.

In an ideal world, the only things that would enter a septic tank would be waste from our bodies and any little food scraps that managed to get past the strainer in our kitchen sink.

Natural bacteria begin to devour the waste at this point.

In the majority of situations, a leach field is a network of pipelines through which wastewater is transferred to an area of well-drained soil that is particularly sandy.

Other bacteria and oxygen work together to detoxify the wastewater in this area.

As a result of its potent nature, bleach may kill the microorganisms that consume trash.

Pumping the septic tank every two or three years is essential for the health of the system.

You’ll need to be aware of the position of the opening that allows the technician access to the tank during the inspection. More than three decades have elapsed since Tim Carter began his career as a home-improvement specialist. Visit AsktheBuilder.com to ask a query or to find out more information.

SEPTIC PROBLEMS THAT CAN MIMIC DRAIN CLOGS

My family and I just relocated from a house connected to a municipal sewage system to a rural retirement home equipped with a septic tank. Q: Are there any septic tank tips you can provide me? A blockage in the main drain line of my previous residence was a source of concern for me. In any home, what are some best practices for drain lines, and how does one ensure that they are always in good working order? A: If your drain lines have been placed correctly and with the appropriate degree of slope, water and solid waste should generally flow to the sewer or septic tank without causing any issues.

Even though some people believe that having more slope is preferable, if you have too much slope, the liquids will outpace the particles as they go down the drain lines.

Grease is arguably the most difficult problem that municipal sewage technicians and septic-tank pumpers have to deal with.

You’ll be doing them — and yourself — a favor in the process!

It’s inevitable that some grease will make it through.

Grease buildup in septic tank leach fields will be reduced as a result of the presence of these bacteria.

Several times every week, I throw 10 gallons of water into the tallest toilet in my house as quickly as I can while standing on the floor.

Afterwards, I flush my kitchen sink with around 15 gallons of extremely hot water once a month.

Septic tanks may be likened to magical boxes, as long as they are used appropriately and in the proper manner.

Once inside the tank, Mother Nature is allowed to take her course.

1.6 gallons of water enters the tank for every flush of the toilet when it is performing properly, and 1.6 gallons of partially treated wastewater exits the tank on its way to the leach field when the tank is running properly.

It is possible that water will leak through the pipes and into the sandy soil.

Septic tanks are not meant to hold chlorine bleach, or any other substance that contains chlorine bleach.

Never clean paint brushes inside a house or allow water from a cleaning solution to enter the septic system.

To begin, you’ll need to figure out where the technician can get into the tank through a small hole in the ground. More than three decades have elapsed since Tim Carter began his career as a home-improvement contractor. Visit AsktheBuilder.com if you have a question or want to learn more.