What Type Of Screws Used To Secire Septic Tank Cover? (Solved)

Septic tank risers and lids require stainless steel screws. Stainless steel prevents the screws from corroding.

septicsolutions.com

Septic tank risers and lids require stainless steel screws. Stainless steel prevents the screws from corroding. Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications.

How do you secure a septic tank lid?

Keep the lids secure by repairing or replacing all damaged or missing parts. Use bolts, screws, or other locks to secure the lids and prevent easy access. Never drive or park vehicles on top of septic systems – it can damage or dislodge the cover.

How do you remove a plastic septic tank lid?

Some tank lids have built-in handles to pull on, but others require a pry bar to lift them open. If the lid comes with handles, ask for the assistance of a friend or family member to remove the lid. If it doesn’t, push a screwdriver into the seam around the lid and insert the pry bar into the gap. Then, press down.

How heavy is a septic tank lid?

The most common tanks, starting in the 1940s, are concrete, with 3 – 500# lids for a 1000 gallon tank or 4 – 500# lids for a 1500 gallon tank. In the late 1990s, tanks started using 16” square concrete plugs with a lifting bail for easier access to both sides of the tank.

Should septic tank lid be sealed?

Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.

Is it OK to cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

Why does my septic tank have 2 lids?

Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. This tank has a way in (inlet), and a way out (outlet). So, most residential tanks should have (2) lids about 5′ away from each other. A septic tank holds all the liquid waste from your home (toilets, sinks, kitchen, bathtubs, floor drains).

How can I hide my septic tank cover?

The Do’s For Hiding Your Septic Tank

Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view.

Place a light statue, bird bath or potted plant over the septic lid.
Septic tank risers and covers are an alternative to concrete and blend into green grass.

How many lids should a concrete septic tank have?

Two or three lids may be included in your system. The average size of a sewage tank is approximately 5 feet by 8 feet. The lid is buried between 4 inches and 4 feet underground in most cases.

How far apart are the lids on a septic tank?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

Pooling water.

Slow drains.
Odours.
An overly healthy lawn.

Sewer backup.
Gurgling Pipes.
Trouble Flushing.

Amazon.com: 18-8 Stainless Steel Sheet Metal Screw, Plain Finish, Pan Head, Phillips Drive, Type A, 10 Thread Size, 1 3/4″ Length (Pack of 50) (Fits Tuf-Tite Risers and Lids) : Industrial & Scientific

The product was reviewed in the United States on July 18, 2016. Verified Purchase Decent screws – they appeared to be far more resistant to stripping than equivalent goods from Home Depot or Lowe’s. If you’re attaching a 24″ Tuf-Tite septic riser to a TAR (tank adapter ring), for example, and the screws are too close together along the edge of the riser, there’s no way to align a drill-driver or impact gun with the heads of the screws because they’re too close together along the edge of the riser and the flanges on the outside of the riser are “in the way” of the chuck.

The product was reviewed in the United States on July 18, 2016.

The shipment timing was excellent, and the screws were just what I had anticipated.

On March 7, 2021, a review was published in the United States of America.

Unfortunately, I had to return them since they were the incorrect size for my application.
Verified Purchase This was exactly what I needed to solve my septic tank problem.

On July 19, 2019, a verified purchase was reviewed in the United States of America.
On October 31, 2018, a review was published in the United States of America.

Orenco RULB+W-KIT Lid Screw And Wrench Kit 4-Screws

PrevNextUsually ships within 1 week0.1 LBSShipping DimensionsLength: 3 inWidth: 1 inHeight: 1 inLength: 3 inWidth: 1 inHeight: 1 inLength: 3 inWidth: 1 inHeight: 1 inLength: 3 inWidth: 1 inHeight: 1 in

Description
Specifications
Resources

Warranty
Customer Reviews (1)
Additional Information

Orenco RULB+W-KIT Lid Screw And Wrench Kit

Kit with four RRLB 5/16″ Lid Screws and one RRLW 3/16″ Hex Key for 18″ and 24″ Fiberglass Lids
Includes one RRLW 3/16″ Hex Key and four RRLB 5/16″ Lid Screws.

Cancer and Reproductive Harm – www.P65Warnings.ca.gov (Cancer and Reproductive Harm)

Orenco Warranty

Seller promises that all products will be free of defects in workmanship, subject to the exclusions, restrictions, and circumstances set out in this section of the agreement. Claims for a violation of this limited warranty must be filed in the following manner:

A written claim for a breach of this limited warranty must be filed within three (3) years of the date of installation in the appropriate application if the merchandise is an AdvanTex® Treatment System for Residential Applications or for Commercial and Multi-Family Applications
Provided, however, that the System is covered by an Orenco authorized service provider. It is necessary to submit any claim for infringement of this limited warranty in writing if the item in question is a Biotube® Effluent Filter for Residential Applications

Nevertheless, the claim may be submitted at any time following delivery of the Biotube® Effluent Filter to the Purchaser. If the product in question is a control panel, any claim for violation of this limited warranty must be filed in writing within three (3) years of the control panel’s delivery to the Purchaser. When purchasing a FRP Septic Tank Half-Shell, any claim for breach of this limited warranty must be made in writing by the Orenco Distributor or Dealer within five (5) years of the date of shipment to the Distributor or Dealer
When purchasing a Grundfos Effluent and Solids-Handling Pump, PEF or PSE Series, any claim for breach of this limited warranty must be made in writing by the Orenco Distributor or Dealer within one and a half (1.5 Unless the merchandise is a P, PA, or PJ Series Pump purchased with an extended warranty, any claim for breach of this limited warranty must be made in writing within five (5) years after delivery of the pump to the Purchaser
For all other merchandise not specifically listed above, any claim for breach of this limited warranty must be made in writing within one (1) year after delivery of the merchandise to the Purchaser

And for all other merchandise not specifically listed above, any claim for breach of this limited warranty must be made in writing within one (1) year

If the merchandise is an AdvanTex® Treatment System for Residential Applications or for Commercial and Multi-Family Applications, any claim for a breach of this limited warranty must be made in writing within three (3) years of the date of installation in the appropriate application, provided that the System is continuously covered by a service contract provided by an Orenco authorized service provider.

Unless the item in question is a Biotube® Effluent Filter for Residential Applications, any claim for violation of this limited warranty must be made in writing, and it may be made at any time after the Biotube® Effluent Filter has been delivered to the Purchaser.

We’ve been helping customers since 1953

Improver lid screws for Snohomish County, Washington, and the surrounding areas are something that Superior Septic Services takes great delight in offering to customers. When it comes to septic tank repair and maintenance, riser lid screws are an often-overlooked, yet vital, component of the process. Riser screws are required if you want to be certain that your septic tank system is fully working on all fronts. These screws assist in directing those who need to operate on the septic tank to the position of the access hatch, hence reducing the amount of time they spend searching for the hatch itself.

Even a high-quality, strategically-placed riser lid, on the other hand, will be ineffective if it is not put firmly into place.
Theriser lid screws, which we sell to our clients in groups of four in either 2 1/2″ or 3 1/12 ” diameters, are available in two different sizes.

Maintaining your riser lid screws on a regular basis will ensure that you are not missing indicators of rust, looseness, or sewage seepage.
It is our intention to give professional septic tank components as a courtesy rather than as a substitute for expert services.

Septic Tank Lid Safety

Accidental falls into septic tanks do happen from time to time. The majority of the time, the individual who falls in is able to come out without suffering any significant injuries. However, the terrible loss of a kid serves as a warning to check your septic system for broken or missing lids. To ensure that no one is accidentally thrown into your septic tank, follow these safety procedures.

Understand where the lids or coverings for your septic system are situated
Check the condition of the lids on a regular basis for any risks or difficulties. Maintain the integrity of the lids by repairing or replacing any broken or missing pieces
Bolts, screws, or other locks can be used to fasten the lids and prevent unauthorized entry. Never drive or park a vehicle on top of a septic system since this might cause damage or dislodge the lid. When examining or having your septic system pumped, never leave the lid open while you are working on it. After you’ve finished working on your septic system, check to see that the lids are securely fastened. Children should be taught that septic tank lids should not be played with or opened.

Owners of septic systems are responsible for ensuring that their systems are safe and correctly function, which includes keeping the tanks’ lids securely closed at all times.

Finding Your Septic System

If you are unable to locate the septic tank’s entrance, you should call your local health department. Most likely, they’ve given permits for the system, which may have included a map showing where the septic tank is located. The local health agency may not have a record of the tank; if this is the case, consult with a professional septic system firm, which has expertise discovering difficult-to-find tanks. Furthermore, because many systems are totally underground, it is possible that your system will not have lids at the surface.

More Resources

Septic System 101: The Fundamentals of Septic Systems
Taking Good Care of Your Septic System
A video on how to inspect your septic system yourself

Using the Services of a Septic System Professional
Symptoms of a Failing Septic System

Preventing Unauthorized Septic Tank Access

In this video, you will learn the fundamentals of septic systems. What You Should Know About Maintaining Your Septic System A video on how to inspect your septic system on your own Using the Services of a Septic System Expert; Early Warning Signs of a Failing Septic System

Interested in Pumps?

Get the latest Pumps articles, news, and videos delivered directly to your email! Now is the time to sign up. Pumps+ Receive Notifications Periodic maintenance is required for all systems and system components in order to keep them operational and working well. As an industry, we have made the transition to offering access to systems in a number of ways in order to make maintenance easier. Our systems are generally deeper than in the past, and we raise access points to the surface so that they may be easily discovered, identified and accessible.

Every few months, we read of children or householders who have fallen into tanks, sustaining major injuries or even death.
When I first started working in the business, our advice was that the manhole access to tanks be brought to within 6 to 12 inches of the surface, with the access being concealed by the surrounding dirt.

Installers placed a metal plate on the access lid, which could be detected by a metal detector, to aid in the process of identifying the device.
Of course, more time, effort, and expenditures are still required, thus providing access to the surface is still beneficial.
Depending on whether gravity is being utilized to distribute effluent through the system, it may not be possible to hide the tank entrance without generating a mound of dirt in the yard, which is something that residents do not appreciate.

Access has been made possible as a result of all that has transpired.
Of course, this means that, as a service provider, you must be aware of the location of the key.

Each of these lids is secured to the riser with a set of screws, including a “safety screw” that has a different type of head than the other screws.

I just went on a walk around my area to take a closer look at tank restraints.

There is a concrete tank lid with a padlock and chain in one of the photos below, but the lid is not actually fastening anything.

Both the service provider and the homeowner are responsible for addressing these concerns.

Follow the links below to learn about various secondary protection items.

The safety net is secured to the inside of the riser so that it remains in place at all times during the ride.

The interior supports or ledges of Tuf-Tite tank risers serve to reinforce the plastic safety lids on the inside of the tank.

Pumpout may be accomplished without removing the safety lid, thanks to an access hole in the lid.

PolyLok is a child safety screen.

Everything you need, from self-tapping screws to concrete anchors and a carbide bit to go with them, is included in the package.

Security net with Sim/Tech Filter Riser security nets are available from Sim/Tech Filter for risers up to 30 inches.

Pump hoses can be put into the web using this method.

Riser safety grates from Orenco Riser safety grates from Orenco are designed to sit on the flange at the bottom of an access riser to assist prevent persons or tools from falling into a tank.

System for securing the infiltrator’s safety cover Infiltrator Water Technologies provides a riser safety lid system with a 24-inch riser.

Both the TW and EZset 24-by-12-inch and 24-by-18-inch risers are compatible with the safety lid system, which is installed in the topmost riser stack of the risers to prevent unintentional entrance into the tank.

Septic Tank Safety: Risers & Lids Save Lives

BrenLin Company manufactures Seal-r septic tank covers.

Interested in Systems/ATUs?

Receive articles, news, and videos about Systems/ATUs sent directly to your email! Now is the time to sign up. Systems/ATUs+ Receive Notifications Earlier this month, two good Samaritans came to the aid of a 2-year-old kid who had fallen into a mobile home park sewage tank near Kissimmee, Florida. The youngster had been trapped in the tank for more than an hour when he was rescued. As reported by WFTV.com, the youngster and other prospective victims were exposed to the sewage tank because the lid had not been securely fastened to the tank.

Rafael administered CPR to the youngster, who was subsequently transported to a nearby hospital, where he was examined and released.
Although this tale has a good conclusion, many comparable occurrences involving toddlers who fall into unprotected sewage tanks result in tragic outcomes.
These ground-breaking solutions guarantee that septic tank lids are properly secured and that unlawful tank access is prevented.

The company’s job to ensure that the product is as safe as feasible as a manufacturer of septic system accessories and equipment.
There is also a riser safety screen protection device for use on PVC ribbed pipe, HDPE corrugated pipe, and concrete septic tank risers, which is available from the manufacturer.
The heavy-duty ABS safety screens, which are bright yellow in color, are available in three different sizes: 12, 20 and 24 inches.

There are gaskets and safety hardware incorporated, as well as a safety net option available.

On request, foam-filled lids may be made, and coverings can be made to fit specific needs.

They are available in polyethylene and PVC materials in diameters ranging from 22 inches to 36 inches in 22-, 24-, 26-, 30-, and 36-inch sizes.

The interlocking design of the rims and lids is made possible by a neoprene gasket and a twist lock mechanism.

The ledges will be used to hold the company’s plastic interior safety lids as well as a number of other internal safety devices, such as concrete, fiberglass, or rope netting, manufactured by third parties.

Locking riser lids from Sim/Tech Filter are primarily intended for use on systems that get a lot of traffic.

The web locks and keeps the lid in place in the same action as the web locks and retains the lid.

Seal-r septic tank covers are available from the BrenLin Company.

Increasing need for larger risers to handle modern technological equipment has resulted in the 42-inch lid being introduced.

PVC and HDPE pipe are accommodated with a flat-style lip.

Installing it flush to the ground is made possible by its design, which includes a cored centering ring that helps to line and fit the lid securely to the riser.

is comprised of rotomolded plastic and has a weight rating of 3,500 pounds.

The lid is made of noncorrosive material and can resist a wheel weight of 2,500 pounds. The waterproof and gastight seal provided by the built-in lid gasket is quite effective. Visit for a comprehensive listing of products as well as contact information for the manufacturers.

Installing Access Risers

In order to perform fundamental septic system maintenance, you must first evaluate the condition of your septic tank and pump chamber (if you have one), which can be time-consuming and labor-intensive if you do not have access ports known as risers. Consider the prospect of having to dig through two feet of dirt to check the oil on your vehicle. Installing septic tank risers for an off-site septic system is broken down into four steps, which are outlined below. Please keep in mind that the currentWashington State Coderequiresrisers for all septic systems, which means you may be forced to install one if you are asking for a construction permit, land division, or any other type of official action in the state.

A few safety tips before you get started:

Struck by an underground electrical wire while excavating may be quite dangerous! If you are in any way doubtful about the presence of subterranean lines on your property, you can have them found by contacting 1-800-424-5555 or 811, or by visiting the website

Use the buddy system to your advantage! Working with a partner is usually recommended since the fumes connected with open sewage can be dangerous and cause a person to go unconscious. Never leave a septic tank that is open unattended! Once the lids have been removed, exercise caution around the tank and keep dogs and children at a safe distance. Examine the structural integrity of your septic tank! If a septic tank is more than 20 years old, it is recommended that it be pumped to ensure that the tank’s structural integrity and water-tightness are not compromised. Instead of spending money on costly repairs, it is preferable to replace the tank with a contemporary septic tank that includes risers as part of the installation. A permit from your local Environmental Health department is required for the replacement of a septic tank.

Gather all the MaterialsTools You will Need

It should be possible to get most of the components required to construct a septic tank riser at your local plumbing hardware store or on the internet. PVC risers are available in a variety of shapes and sizes. Some of the brand names you might be familiar with include “Tuf-Tite,” “Polylok,” and “Orenco.” Risers are typically 24 inches in diameter and may be readily inserted into the tank hole opening without difficulty. Due to the fact that certain tanks have square openings, it might be difficult to fit a riser around the square entrance.

Some types of risers are made to order based on the height you want, while others are available in increments of 6-12 inches.

Then purchase an Adapter and Risers that are somewhat bigger in diameter than the hole.

See below for Step 4 on attaching risers to the tank entrance.

Tank Adapter Ring (TAR)

Riser Adapter Ring Kit
Butyl Rope
Risers

Domed Lid OR Flat Lid
Stainless Steel Screws

The following materials will be required for digging up your septic tank(s):

As-built condition of the sewage treatment system The following items are required: sketch on paper, measuring tape, shovel, probing instrument, eye protection, and work gloves.

To cut risers to the proper size, the following tools are required:

Circular saws, saber/jig saws, and hand saws

Raspor file
Marking pen
Tape measure

Drill with a 1/4″ bit

Materials required to seal the risers to the tank include:

High-strength concrete patch mix

A small bucket
A mixing stick
And gloves

Follow the four simple procedures shown below to install access risers on your septic components, or download and print a copy of theSeptic Tank Manhole and Access Riser Installationbrochure from Thurston County Environmental Health to get started right now.

Step 1: LocateYour Septic Tank(s)

When looking for your underground septic tank or tanks, it is essential to consult the ‘As-built’ Record Drawing linked with your septic system for assistance. Essentially, this is a plot diagram that shows where your septic system was put on your property, as well as distances between septic components and notable landmarks. The Online Permit System will guide you through the process of locating septic-related documentation if you do not have a “as-built” document. It is possible that you may need to contact Environmental Health to examine the paper records or seek a specialist to find your tank if an as-built is not accessible.

Probing the area around the septic tank with the probing instrument until you contact concrete should be done lightly.

The presence of underground electricity or other utility lines and cables might put your septic tank in danger.

If you run into a power line, the consequences could be fatal. Call 1-800-424-5555 or 811 or go online to make sure that any electrical utilities are found before you begin digging before you begin digging.

Step 2: Uncover Your Septic Tank (s)

Once you’ve discovered your septic tank, you may start digging about. The tank is typically 6 feet wide by 8 feet long, with the width being the largest size. Remove all of the pebbles and debris from around the tank’s lid openings and dig out the whole top of the tank. You will want to clean out any dirt that has accumulated on the surface of your septic tank. This will assist you in ensuring that you generate a high-quality seal. You should have two openings: one over the inlet (which comes from the home) and another over the outlet (which comes from the yard) (into the drainfield or pump chamber).

You’ll need a riser for each of the doors you open.

Typically, the inlet side is the one that is nearest to the home.
When cleaning the tank, it is beneficial to remove the complete top of the tank.
Risers must be modified in order to be correctly installed, and all manholes (holes 24 inches or bigger in diameter or square in shape) must also be updated, as well as the tankinlet and outlet baffle covers (if separate from the manholes).

If you discover one – and only one – riser already installed, it is most likely for the pump chamber, which only requires a single riser to provide access to the pump to function properly.
Remove the concrete lids so that they may be disposed when the project is completed.
Consult your’As-built’Recorddrawing to establish whether you have a distribution box (D-box), which you will also need to unearth and place a riser on if you have a typical gravity system.

Once the lids have been removed, proceed with caution around the tank.
Inform someone of your whereabouts in case you are involved in an accident.

You should be aware that exposure to sewage can result in serious sickness, so make sure you wear gloves and thoroughly wash your hands afterward with soap and water. It is also recommended that you wear eye protection in the event that debris falls into a tank and splashes back at you.

Step 3: Fit Risers to Component Openings

In accordance with the diameter of the septic tank manholes, huge risers will either sit on top of the septic tank or will fit down into the aperture of the tank by 1-3 inches. It’s important to keep this in mind while calculating the height of the riser. The surplus can be easily removed; nevertheless, it is difficult to add a few inches to the length. Take the following measurements of the manhole cover’s diameter:

Theriser will fit into the tank hole if the aperture is between 26 and 29 inches in diameter. Measure the distance from the ground to the top of the septic tank and multiply the measurement by three inches. The following is required if the aperture is greater than 29 inches: a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required. In this case, it lies above the manhole and narrows the aperture, allowing a 24-inch riser to be utilized instead of a more expensive 30-inch riser, saving money.

The distance between the ground and the top of the fiberglass plate should be measured. You may choose to place the risers so that they are level with the surface of the ground, or you may want them to stand out a few inches above the ground (if a riser is above ground make sure you are careful when mowing). Tips: To shorten a big riser with ribs, drill a 1/4-inch hole between the ribs above the cut line and finish the cut by following one of the grooves between the ribs with a saber/jig saw to finish the cut.

By eliminating one of the ribs from the largeriser, it may be made to fit more snugly into a smaller manhole entrance.

Step 4: Attach Risers toSeptic Tank (s)

It is recommended to pump out an old septic tank that is 20 years or older in order to check its structural integrity and water-tightness before using it again. If the tank requires extensive repairs, it is preferable to replace it with a new septic tank that includes risers as part of the installation. A permit from the local health department is required for the replacement of a septic tank. Remove any dirt and debris from the tank’s surface by cleaning it off. Using the butyl rope, construct the components of the risers in accordance with the manufacturer’s instructions.

Jet-Set, Rapid-Set, Thorough-Set, and Perco-Plug are just a few of the brand names available.
NOTE: For optimal results, just a little amount of concrete patch should be mixed at a time.
The patch mix should be used to seal the riser to the septic tank.
If you want to avoid a safety danger, make sure you properly attach theriser lid using the screws that come with it!
Risers for inlet or outlet apertures that are smaller than the openings should have the bottom few inches sanded with rough sandpaper to allow a firmer connection between the two surfaces.
A useful source of information on correct installation of risers on septic tanks may be found at your local hardware store where you purchased the risers and covers.

Thurston County Environmental Health is should be commended for providing the foundation for this documentation.

ACME Septic

Each and every septic system is equipped with a tank lid that is easily accessible to anybody who enters the property. Tank lids that are properly secured are critical to the protection of your family, friends, and neighbors. We will always examine the tank lids when we come out to do Monitoring and Maintenance (M M) checks to verify that they are correctly fastened and in excellent shape, with no apparent cracks or damage. If a tank lid is not securely secured, it is possible for individuals to fall in by mistake.

In addition to the difficulty of attempting a potentially nine-foot climb, the methane gas that accumulates in the tanks has the ability to leave someone unconscious.
For a variety of causes, the screws that hold the lids in place can and do go missing from time to time.
Alternatively, HD Fowler in Gorst and Ferguson’s in Silverdale both sell replacement scews at a reasonable price (click here for contact information).
It is thus critical that you check your lids on a frequent basis.
Acme recommends fiberglass lids over plastic lids because of their superior endurance under the UV rays of the sun and general wear and tear compared to plastic lids.
HD Fowler and Fergusons are two places where you may get new lids.
Additionally, jumping, driving, or parking on tank lids (unless you are using DOT grade tanks) is not suggested due to the increased pressure that can cause lids to fracture quickly.
If you’d like to learn more about tank lid safety, please visit this website.
Acme Septic DesignMaintenance retains ownership of the copyright and reserves all rights.

Septic Riser & Lid Repair Statesville

Sewage Tank Risers and Lids or Lids are intended to be used in conjunction with existing concrete, fiberglass, or metal septic tank covers. Septic Risers are meant to raise the level of a septic tank’s below-grade opening to the same level as or higher than the surrounding ground. Risers are frequently absent from typical septic tanks, particularly in earlier types, and are thus difficult to find. The diameter of risers typically ranges from 8 to 24 inches. Septic tank riser installation services are provided by Lentz Wastewater Inc.

The aperture of the riser is protected by a tight-fitting lid.

Do I Need a Septic Tank Riser?

A septic tank riser system is an extremely beneficial addition to your septic system and is highly suggested by experts. This device will make the process of maintaining and monitoring your septic system more easier, more convenient, and less expensive. Septic tank risers that have been authorized by the state of North Carolina must be put on any new or updated septic system in the state. Your septic system is one of the most expensive mechanical elements on your property. It is also one of the most complicated.

If you don’t have septic tank risers, your system will be “out of sight and out of mind” for a long time.

Advantages of Septic Tank Risers

Rising and covering septic tanks in the modern day are significantly more aesthetically pleasing and mix in with their environment
The lightweight septic cover makes it simple to get access to the septic tank. The contemporary covers are lightweight, weighing less than 10 pounds, which makes maintaining your tank considerably simpler. The old-fashioned concrete septic tank riser rings are quite heavy, weighing hundreds of pounds. The concrete coverings are similarly heavy, weighing between 60 and 80 pounds. Many individuals are deterred from lifting the cover and doing an inspection because of the weight of the object. Septic tank riser rings made of modern polyethylene are often less than 30 pounds in weight. Septic tank risers also have the advantage of making it considerably easier to prevent surface water from entering the tank. In the olden days, concrete riser rings were not equipped with a gasket. As a result, surface water may readily flow between the connection between the tank and the riser ring, as well as between the lid and the riser ring, when the tank is filled with water. Nowadays, a watertight seal is installed between the septic tank and the base flange of the riser. The riser rings and covers are also equipped with a long-lasting closed-cell foam gasket to keep the junction between them from becoming leaky. To keep little children from curiously messing with the cover and putting themselves in danger of falling into the septic tank, modern riser covers are fastened with threaded screws.

Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover. Our septic tank risers and covers are constructed of high-quality, heavy-duty polyethylene plastic, which allows them to be both extremely robust and durable while still being lightweight and simple to handle and transport.

Damaged Septic Tank Cover?

In the event that you drive over your septic tank, which is not suggested at all, the cover or lid may be damaged. Lentz Wastewater fixed septic riser covers that were broken, damaged, or mi ssing.