What Is The Purpose Of A Septic Tank Riser? (Solved)

A septic tank riser is a pipe made of either plastic, fiberglass, or concrete. It creates a vertical portal at the ground surface for easy access to the septic tank for inspection and pumping out. The lid is then either left exposed or with a very thin layer of soil and grass over it.

septicsolutions.com

  • The main purpose and benefit of a riser is to raise the height of the septic tank lid. In most cases lids are locked onto the top of a septic tank, and are held down by stainless steel screws. Some risers may also include structural ribs.

Is a septic riser necessary?

Installing septic tank risers are a highly recommended addition to your septic system. The septic tank riser will make maintaining and monitoring your septic system much easier and more convenient.

Should septic tank riser be above ground?

Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.

Are septic tank risers safe?

Fortunately, lids and risers in today’s onsite market can help prevent these unfortunate incidents. These innovative products ensure septic tank covers are secure and prohibit unauthorized tank access. Polyethylene septic tank covers from Hedstrom Plastics fit standard 18- and 24-inch double-wall corrugated pipe.

How do you hide a septic tank riser?

The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.

How high should septic tank riser be?

Tank risers are typically installed about 3 inches above grade. Having the lid above grade will make it easy to find, however, some people will choose to have the lid just a couple of inches below grade so that is easier to mow over and less visible.

How much weight can a septic tank riser lid hold?

The 24-inch solid fiberglass DuraFiber riser lid from Orenco Systems has a flat-style lip for PVC and HDPE pipe. It weighs 10 pounds, but resists damage from lawn equipment and can withstand a 20,000-pound load.

Can you cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How far apart are septic tank lids?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

What Is a Septic Tank Riser?

If you have an older septic system, you may be wondering what a septic tank riser is and why you would need one. Traditional systems were designed to be out of sight, out of mind; they were buried for 15-20 years with no consideration given until they required emergency pumping or repair. Newer septic systems now have risers, which are a positive thing, since they provide a more efficient way of draining the tank. Septic tank risers provide simple access to your septic tank from the ground level as well as increased view into the operation of your septic system.

The Benefits of a Septic Tank Riser

Before we go into the advantages, it’s important to understand what a septic tank riser is. Riser are often built of plastic or concrete, depending on the use. They are enormous circular pipes that are installed above the cleanout entrance of the septic tank and are long enough to extend the cleanout opening all the way to the ground level. The advantages are as follows:

  • Even when the ground is frozen, it is possible to get access during the winter months. Maintenance and pumping of the septic system may be done quickly and easily. Septic system repair should not need digging up your yard. A visual reminder of the importance of your septic system

The last advantage may appear to be somewhat counter-intuitive. What are the benefits of having a visual reminder of your septic system? Preventing premature septic system collapse is possible through periodic septic system maintenance. With a septic tank riser, you’ll not only be able to identify the position of your septic system, but you’ll also have a visual reminder to have your system pumped at least once every two to three years as well. However, the septic tank risers that we install are intended to fit in with the surrounding environment.

How Much a Septic Tank Riser Costs

In your house, your septic system is one of the most vital mechanical systems to have working properly. A septic tank riser, which costs only a one-time installation price, can safeguard your septic system for many years to come. The ease with which maintenance and pumping may be performed will almost instantly result in a return on your investment. You may also say goodbye to costly and unsightly excavations when it comes to upkeep. Although the ground may be frozen in winter, you will be able to inspect your septic system visually even during the coldest months of the year.

This will result in costly emergency repairs.

If you would like to learn more about how septic tank risers might assist you, please contact us at 800-595-7907.

Traditional systems were designed to be out of sight, out of mind; they were buried for 15-20 years with no consideration given until they required emergency pumping or repair.

Newer septic systems now have risers, which are a positive thing, since they provide a more efficient way of draining the tank. Septic tank risers provide simple access to your septic tank from the ground level as well as increased view into the operation of your septic system.

What are the benefits of a septic tank riser?

Before we go into the advantages, it’s important to understand what a septic tank riser is. Riser are often built of plastic or concrete, depending on the use. They are enormous circular pipes that are installed above the cleanout entrance of the septic tank and are long enough to extend the cleanout opening all the way to the ground level. The advantages are as follows:

  • Even when the ground is frozen, it is possible to get access during the winter months. Maintenance and pumping of the septic system may be done quickly and easily. Septic system repair should not need digging up your yard. Your septic system will be visible as a reminder

The last advantage may appear to be a bit counter-intuitive. What are the benefits of having a visual reminder of your septic system? Preventing premature septic system collapse is possible through periodic septic system maintenance. With a septic tank riser, you’ll not only be able to identify the position of your septic system, but you’ll also have a visual reminder to have your system pumped at least once every two to three years as well. However, the septic tank risers that we install are intended to fit in with the surrounding environment.

How much does a septic tank riser cost?

In your house, your septic system is one of the most vital mechanical systems to have working properly. A septic tank riser, which costs only a one-time installation price, can safeguard your septic system for many years to come. The ease with which maintenance and pumping may be performed will almost instantly result in a return on your investment. You may also say goodbye to costly and unsightly excavations when it comes to upkeep. Although the ground may be frozen in winter, you will be able to inspect your septic system visually even during the coldest months of the year.

In addition to protecting your system and saving you money, a septic tank riser is a reasonably easy solution.

We’d be happy to tell you more about how septic tank risers might help you.

for an appointment or to learn more about our services.

Felix Septic Service is a company that provides septic service. 2020-05-19T15:44:01-04:00

What You Should Know About Septic Tank Risers

Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.

  • These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
  • What Are the Advantages of Using Risers?
  • Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
  • The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
  • The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
  • For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
  • Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.

Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.

Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.

This allows for the installation of the pump and riser to be completed in a single step.

Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.

A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.

We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!

5 Reasons to Install Septic Tank Risers

Most homeowners consider their septic system to be a “out of sight, out of mind” utility that receives little or no attention until there is a problem. Septic systems are buried underground, and if you aren’t sure where your tank and its components are, it can be difficult to locate your access ports or manhole covers if you aren’t familiar with your property’s layout. Septic tank risers are a straightforward, cost-effective solution to this problem that can result in significant long-term savings.

  1. What is a septic tank riser and how does it work?
  2. Risers, also known as “extensions,” are available in a variety of heights to bring any access port up to grade.
  3. Because the riser extends from your tank opening to the lawn surface, it makes it much easier to access your septic tank for pumping, maintenance, and inspections than it would otherwise be.
  4. Digging down to your septic tank lid or access port and fitting the riser to the opening are the steps involved in installation.
  5. Then we’ll fill the area around the pipe with dirt and secure the lid on top of it once it’s in place.
  6. The AdvantagesWhen it comes to septic tank risers, there are a plethora of advantages to consider.
  1. The expense of installing a riser is one-time, but the advantages are long-lasting. The cost of the extension will be covered after it is completed, and your tank will be easier to access for pumping, maintenance, and inspections. Never again will you have to look for your access ports! When we put your manhole cover up to grade, it will be clearly visible at all times
  2. There will be no more digging! This is especially useful during the winter months, when digging out a buried manhole cover might take several hours and need specialized equipment. This is in addition to the mess that it can create in your yard if the lid is buried several feet down
  3. Nonetheless, it saves you money. Time is money, after all! Furthermore, since it is simpler to reach your septic tank, our staff can complete your task or resolve your problem much more quickly
  4. It is critical to understand where everything is located. If you’re putting up a new patio, house addition, or backyard project, understanding where your tank and its components are located will be quite beneficial to your project. We’ll even draw you a schematic if you need one
  5. Just let us know.
See also:  Water In Basement Through Clean Out Cap When Raining Have Septic Tank?

Are you ready to talk to us about septic risers and how they can make your next septic pumping job a whole lot easier? For a $20 discount, call 717-898-2333 and mention this article. We provide service to homes and businesses across Central Pennsylvania, and if you know your tank is due for a pumping, we can install your risers at the same time that your tank is being serviced.

Septic Tank Risers

In what capacity does an aseptic tank riser serve, and why would you require one? If your septic tank service worker has to dig up your yard every time your septic tank has to be cleaned, you do not have a riser built, and it is probable that you have a concrete cover buried someplace underground. The Ariser septic tank lid replaces your old septic tank lid, allowing you to access your tank from aboveground, making it easier to manage. It is possible that installing a riser will lower the cost of pumping your tank (this is not a guarantee; be sure to inquire).

It may even be possible to gain access to your septic main for cleaning and inspection depending on your external pipe system.

However, if you have an older system, the majority of tanks were built with concrete lids that frequently degrade and are typically buried beneath the earth.

Most septic pumping companies also provide riser installation, and it is typically less expensive to consolidate services rather than buy them separately because you save on service fees by doing so.

Septic Tank Riser Styles

Septic tank risers are available in a variety of designs and are composed of a variety of various materials, including concrete. Despite the fact that some are built of concrete (which are the most durable), some people find them ugly. Concrete risers are more difficult to construct and may need the use of special equipment to lift them off trucks, increasing the labor costs even if the materials are less expensive. Septic covers made of polyethylene, PVC, and other plastic materials are lower in weight and come in a variety of heights to meet your demands.

  1. The majority of designs may be made to fit your specific height requirements.
  2. It should be noted that the load-bearing capacities of the lids varies.
  3. Riser pipes are available in a variety of sizes ranging from 8 to 24 inches in diameter, with lengths varying based on the depth of your tank entrance.
  4. Although it is possible to cover them with sod and mark their location in order to be able to raise them for maintenance, this defeats the point of accessibility and may lose you of the potential savings that come from not having to dig out your cover every time it has to be serviced.

Septic Tank Riser Cost

Depending on the size, the material, the design, and the installation, the cost of a septic tank riser can vary significantly. Spend at least $150 on a basic model, but keep in mind that they may cost up to $400 depending on the model you select. If you have a twin septic tank, double the above figure by two. The labor and supplies are one-time expenses that will be soon recouped by not having to pay for digging when you want pumping or inspections of your system. Most of the time, they can be installed in a half-hour or less.

undefined

The inefficiency of having to dig up your grass to access your septic tank whenever it has to be pumped or undergoes periodic maintenance is well known to those who own septic systems. However, while burying the tank below is a practical approach to keep it secure and hidden, it can make routine duties more complex, costly, and time-consuming. This is one of the primary reasons why many individuals prefer to install a septic tank riser. As the name implies, it is a concrete or plastic pipe that runs from the pump-out hole to the ground level of a sewage system.

The installation of a septic tank riser in Prior Lake, Minnesota, is a simple and cost-effective solution to septic tank maintenance problems. If you’re deciding whether or not to acquire a tank riser, consider the following advantages and disadvantages:

  • A septic tank riser makes it simple to determine where the system is located. PRO – Low maintenance: Besides being useful for maintenance, it may also be useful for monitoring the system’s operation and quickly accessing the system if something goes wrong. BEING ABLE TO FIND THE Septic System FAST may save you valuable time and work. Additionally, it may be able to assist minimize the expenses of any future service visits
  • Nevertheless, PRO – Protected from the elements: Septic tank risers are intended to endure everything Mother Nature throws at them, including snow, wind, and whatever else Mother Nature has in store for them. Depending on the material used, the riser can be formed of concrete or a thick heavy plastic that is fitted with a highly strong cover to keep the system totally free of dirt. This can help to decrease damage to the system and avoid the occurrence of additional problems. A pipe or lid in the center of a lawn may be considered an eyesore by some homeowners, regardless of how handy it may be in other ways. CON – Convenience: In order to allow the grass to grow over the top of the riser lid, one alternative is to set the lid a couple of inches below the level of the lawn. Afterwards, all you’ll have to do is dig up that location without disrupting the rest of the yard. In most cases, homeowners prefer to build a riser on an existing septic system rather than constructing a new one. This is a project that will require the services of a septic tank professional. Even while this will necessitate some digging and disturbance in the yard, it’s vital to remember that it will ultimately preserve your lawn. CON – Cost:There are certain costs connected with building a septic tank riser, notably the cost of the supplies and the labor involved. Although this is an expenditure that will pay for itself in the long term through years of cost savings during future inspections and maintenance, it is one that should be considered.

It’s evident that building a septic tank riser may be a desirable upgrade, despite the few small drawbacks that may be connected with the process. If you have any more questions, please don’t hesitate to contact the professionals at Mike’s SepticMcKinley Sewer Services. Throughout Prior Lake, MN, we are experts in everything septic. This includes tank and system design as well as installation, accessories, pumping, cleaning, and routine septic maintenance. Reach out to one of our septic system specialists immediately by phone or email!

Benefits of Installing Septic Tank Risers

Although there are a few small negative aspects to installing a septic tank riser, it is evident that it may be a valuable enhancement. If you have any more questions, please do not hesitate to contact the professionals at Mike’s SepticMcKinley Sewer Services. Throughout Prior Lake, MN, we are experts in everything septic. This includes tank and system design as well as installation, accessories, pumping, cleaning, and regular septic system maintenance. Reach out to one of our septic system specialists right away!

  1. The cost of installing a riser is a one-time expense. The cost of the extension will be covered after it is completed, and your tank will be easier to access for pumping, maintenance, and inspections. Never again will you have to look for your access ports! When we put your manhole cover up to grade, it will be clearly visible at all times
  2. There will be no more digging! This is especially useful during the winter months, when digging out a buried manhole cover might take several hours and need specialized equipment. Furthermore, it saves you money by avoiding the mess that it might create in your yard. We understand that time is money, and when our staff has simpler access to your septic tank, we can get your project done or your problem resolved more quickly. It’s critical to be aware of where things are at all times. Are you thinking of building a new patio, home extension, or backyard project? The ability to pinpoint the location of your tank and its components is quite beneficial. We’ll even draw you a schematic if you need one
  3. Just let us know.

Are you ready to speak with us about septic risers? When it comes to septic tank repair, this is a straightforward service that will make your life a whole lot simpler. To schedule service, please call us at: 607-564-7931.

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

  1. Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
  2. Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.
  3. The installation of a septic tank riser is a cost-effective solution to this issue.
  4. The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.
  • Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
  • And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers.

So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership? Please contact our local office now to talk with a polite member of our team.

How to Care for Your Septic Tank Risers

You will not be short of resources when it comes to learning how to properly care for your septic system, since there is a lot of information available on the basic maintenance of your system. The instruction on how to properly care for your septic tank risers, on the other hand, is conspicuously absent. Despite the fact that they are seldom given much attention, they are an extremely vital component of your septic system. In this post, we’ll go over how to properly care for your septic tank risers, as well as how to determine when it’s time to repair or replace them.

What are Septic Tank Risers?

Sewage tank risers are straightforward in construction, consisting of concrete, plastic, or fiberglass pipes that stretch vertically from the septic tank up to the ground level. It is usual for them to be 12-24 inches in diameter and 2-4 feet in length, depending on how far below earth your tank has been buried. In order for your service provider to have access to your buried septic tank for service visits or inspections, risers must be installed at ground level on your property. It has been around twenty years since septic tank risers have been needed for all systems in the state of Ohio.

See also:  What Septic Tank Do I Have? (Solved)

Proper Installation of Septic Tank Risers

Unlike previous versions consisting of clay tile, which were prone to cracking when struck by a lawnmower, modern septic tank risers are composed of concrete, plastic, or fiberglass, and are therefore far more durable. Because they feature rubber gaskets between portions and are fastened together, today’s risers provide a better seal than their clay equivalents of the past. To the contrary, septic tank risers should be completely waterproof in order to prevent groundwater from entering your tank.

Landscaping Around Septic Tank Risers

You’ll discover a plethora of resources on the internet that advise disguising septic tank risers by burying them under mulch or just beneath the surface of the soil. Septic tank risers, on the other hand, should never be buried. To avoid groundwater entering the system, they should be 2 inches above final grade rather than 2 inches below final grade. Mulch should not be used near septic tank risers. It is possible that mulch will fall into the tank during inspections and servicing visits, producing unsightly blockages and perhaps causing major damage.

Keep in mind that the vegetation you grow around your septic tank risers should be considered as well.

Trees, bushes, shrubs, and tall ornamental grasses should not be planted in close proximity to the riser since their roots may grow into the riser and cause serious damage. Tall ornamental grasses have particularly problematic roots, which can make them difficult to maintain.

Common Issues with Septic Tank Risers

Tank risers, like every other component of your septic system, should be inspected on a regular basis to verify that they are in perfect working order and are not in need of repair. The most common problem we see with septic risers is damage caused by the lawnmower, which occurs when homeowners bump into or drive over the riser with their vehicle. Make certain that anybody who will be caring for your grass is aware of the location of the risers and understands the necessity of not striking them with any maintenance equipment, such as lawnmowers, weed eaters, and the like.

Northeast Ohio’s varied temperatures, particularly during our frosty season, have the potential to move them and cause the watertight barrier to collapse.

The risers will need to be fixed if water is seeping into the system, and this will prevent groundwater from coming into your plumbing system.

Supeck Septic is Your Trusted Septic Service Provider

Supeck Septic is the leading septic service provider in Northeast Ohio, and the company has been providing great customer care since its founding in 1968. We are fully licensed, bonded, and insured to provide routine and emergency septic services, including the installation and repair of septic tank risers, to both residential and commercial customers. We retrofit old tanks with new risers, repair existing risers, and supply all of the components and accessories needed for the do-it-yourselfer.

Articles that are related Mulch your septic system to keep it running smoothly.

Grants for the Upgrade and Repair of Septic Systems in Ohio

What is a Septic Tank Riser?

  • A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
  • Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.

Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. If you’re a homeowner in the United States who relies on a septic tank, you’re probably aware that they’re buried deep in the earth and can be difficult to detect and access when it comes time to do maintenance on them. As a result, you may be required to pay substantial digging and labor fees. With a septic tank riser, you can now find and manage your septic system more rapidly, which will allow you to put more money back in your pocket as a result.

What Is a Septic Tank Riser?

As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn. The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.

The Benefits: How Septic Risers Save You Money

As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years.

However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.

No Digging Fees

You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank. Your septic tank will need to be recovered with earth once it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.

Reduces Labor Costs

Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.

You’ll Only Pay for Materials and Labor Once

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.

Septic Tank Riser Styles

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the process. The money you save on yearly inspections and local maintenance will more than compensate for the cost of the septic tank riser.

Concrete Septic Tank Risers

Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:

  • Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
  • Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection

Plastic Septic Tank Risers

Plastic septic tank risers are available in a variety of materials, including PVC and polyethylene, among others. Pros:

  • Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
  • They may be covered with sod to improve their looks
  • It is not susceptible to cracking like cement. Plastic is resistant to erosion.
  • It is possible to crush it beneath the earth
  • However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.

How Much a Septic Tank Riser Costs

Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.

Installation Usually Requires a Plumber

In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.

They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.

What is the purpose of a septic tank riser?

Asked in the following category: General The most recent update was made on April 27th, 2020. Plastic, fiberglass, or concrete aseptic tank risers are used to connect the tank to the rest of the system. At the ground surface, it forms a vertical gateway providing convenient access to the septic tank for inspection and pumping out. The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener. If you have an older septic system, you may be wondering what a septic tank riser is and why you need one.

  1. Septic tank risers make it easier to reach your septic tank from the ground level and provide better view into the operation of your septic system.
  2. Using a trowel and a wire brush, remove any dirt and debris from the area.
  3. A trowel should be used to press the tarsealant into the concrete where the manholeriser will rest.
  4. Consider the following question: what does a septic tank riser look like?
  5. Sewage tank risers, an apparently simple and common sense notion, are sometimes absent from typical septic tanks, particularly older types.
  6. Septic tank risers are often built of polyethylene, polyvinyl chloride (PVC), or concrete.

However, while concreterisers are the cheapest (about $100), they are also the most heaviest and trickiest to install. Arisers manufactured of polyethylene or PVC will normally cost between $200 and $300, depending on their size and complexity.

Septic Tanks Risers- Bring Your Access To Ground Level

Getting a little tired of having to dig up your yard every time your septic tank has to be pumped out or serviced? Are you getting tired of dealing with incredibly hefty concrete lids? It appears that you are in need of septic tank risers in order to bring your access down to ground level! Our septic tank risers and covers are constructed of high-quality, heavy-duty polyethylene plastic, which makes them extremely sturdy and durable while also being lightweight and simple to handle.

THE POLYLOK ADVANTAGE

Septic tank risers are available in a variety of shapes, sizes, and designs on the current market. We believe our Polylok septic tank risers are the best money can buy in terms of quality. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

Once the hole has been backfilled, the structural ribs in the Polylok septic tank risers are inserted inside around each riser piece, providing them with tremendous strength and allowing them to maintain their shape under the pressure of the earth being pressed on them. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.

LIDS WITH HANDLES

The access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise maintained. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

LARGE ADAPTER RING

An adapter ring is required in order to properly install septic tank risers on your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

GET OUT YOUR MEASURING STICK!

A few measures must be taken before purchasing a septic tank riser system in order to ensure proper installation. The first thing to consider is the size of your opening. Take a measurement of the aperture in your septic tank at its widest point to determine the size of your tank. Instead than measuring the present lid, it’s critical to measure the opening. Because you will be removing the present cover, the measurements of the lid are no longer important and may differ from the size of the aperture itself.

The second measurement will be the distance between the top of the septic tank and the surface of the ground. You are now prepared to make a purchase based on these two measures!

THE COMPLETE RISER SYSTEM

We have a large selection of components from which you may pick to create your own own full riser system. Our many various options offer our product the adaptability to be utilized in virtually any application, but they may also be a bit daunting when attempting to pick which components to buy for a certain application. Each component is discussed in further depth below.

See also:  How To Replace A Septic Tank Cap Look Like? (Solved)

ADAPTER RINGS

The adapter ring is the first component that you’ll need to put together in order to assemble a full riser system. The adapter ring attaches directly to the septic tank, allowing the risers to stack, lock, and mount to it without the need for any additional hardware. Having this component is critical since the risers are not flat on the bottom because they are meant to be stackable, and it is not feasible to install them straight to the septic tank without this piece. The adapter ring provides the flat surface you need to mount to the tank while also being able to accommodate the stackable risers that are included with the tank.

Our square tank adapter ring can accommodate big square apertures up to 25 inches in diameter and large round openings up to 27 inches in diameter.

They are intended to be used with openings that are 24″ or less in diameter.

Concrete anchors, a masonry bit for installing the anchors, and butyl sealer are all included in this set.

RISERS

To construct a full riser system, the adapter ring is the first component that must be assembled. Stacking, locking, and mounting risers to the septic tank are all made possible by the adapter ring, which attaches directly to the septic tank. As a result of their design to be stackable, the risers do not have a flat bottom and so cannot be mounted directly to the septic tank, which makes this item critical. Using the adapter ring, you may install your tank on a level surface, while also accepting the stackable risers that are included with it.

We can accommodate big square holes up to 25 inches in diameter and large round openings up to 27 inches in diameter with our square tank adapter rings.

Alternative: We sell and strongly suggest our Adapter Ring Installation Kit, which we sell and highly recommend as well.

Concrete anchors, a masonry bit for installing the anchors, and butyl sealer are all included in this package. The use of this installation kit provides a strong mount as well as a proper seal between the adapter ring and the septic tank during installation.

OPTIONAL SAFETY SCREEN

In addition to the 20″ and 24″ riser systems, Polylok also produces safety screens that fit within the riser systems. These screens serve as a supplementary layer of protection in the event that the riser cover is unintentionally damaged or removed, and they keep foreign objects from entering the septic tank. They also keep dogs from slipping into unprotected septic tank openings!

RISER LIDS

You will require a lid to complete your riser system, which is the final component you will require. Both the 20″ and 24″ riser systems may be used with the Polylok lids, which are available in two different types to suit your needs. For ease of access, the basic lid is equipped with handles and a gasket that has been factory placed, as well as stainless steel screws to keep it in place. These lids are strong enough to withstand foot traffic as well as the weight of a riding lawn mower driving across them.

  1. Stainless steel screws are included for installation.
  2. Installations below grade or in regions with a high volume of foot traffic are advised for the heavy-duty lids.
  3. The shipping of these items in large boxes necessitates the addition of additional time, materials, and UPS shipping fees.
  4. If you place your order before 2 PM CST, you will be able to get your order sent the same day you placed it.

FREQUENTLY ASKED QUESTIONS

The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered!

WILL THE LID FIT DIRECTLY ON THE ADAPTER RING OR DO I NEED TO USE A RISER?

With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength. The height of this reinforcement is actually more than the height of the adapter ring. Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter. The lid will not fit through any aperture less than 24 inches in diameter.

CAN I CUT THE RISER SYSTEM DOWN TO A SPECIFIC HEIGHT?

No, the Polylok riser system is available in increments of 6″ and 12″, and it cannot be customized to a certain height. Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.

DO I BRING THE RISER SYSTEM JUST BELOW, AT, OR ABOVE GRADE?

It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade. Because the riser system is airtight and watertight, there is no danger in moving it up to or above grade level.

SHOULD I USE THE STANDARD OR THE HEAVY DUTY LID?

The regular lid is sturdy enough to withstand foot activity and weights up to the weight of a small riding lawn mower passing over it without bending or breaking.

If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended. If you have any more queries, please contact us at 1-877-925-5132 or [email protected].

What Are Septic Tank Risers?

Septic tank risers are a critical component of a septic system’s design. Because septic tanks are placed underground, it is beneficial to have risers constructed in order to make reaching the tank more convenient for the homeowner. Septic systems require regular maintenance and cleaning services, which should be scheduled every three to four years for those who have them. It is also the homeowner’s responsibility to be aware of the location of the lids and to make the system easily accessible to pumpers so that they may examine, maintain, and clean it.

Definition of Septic Tank Risers

Concrete or plastic septic tank risers serve to connect a septic tank to the rest of the system. They are installed over the top of septic tank access ports in order to increase the apertures’ length and bring them closer to the ground surface. Their use in the system is intended to increase the height of the septic tank’s top. Septic tank risers have been built, and new lids have been installed to bring them to the surface.

Benefits of Septic Tank Risers

Septic risers have a number of advantages over traditional septic tanks. Furthermore, they are simple to include into your existing system. The following are the primary benefits of acquiring septic risers.

Save Money

A one-time fee is charged for the installation of septic tank risers, which covers the cost of materials and labor. To compensate for the additional time and mechanical or physical effort required to locate and dig up septic tank lids, pumpers must charge a premium. It is unlikely that you will be required to pay any more fees in the future if you have risers placed on your tank. If the lids are easily accessible, it will be easy to determine if you are experiencing difficulties with your septic system from the inside out.

Save TimeYard Damage

In any conditions, you won’t have to be concerned about locating and digging up your lids anymore. Unless your tank requires emergency servicing during adverse weather, you will not be required to dig through frozen ground, disrupt your grass, or dig through muck. Access to the septic tank is located below grade.

Your Septic System Will Be Current with StateCounty Code

New state and county regulations require that new construction comply with the following requirements: each riser lid must be watertight, brought to or above the surface, and equipped with a secure closing mechanism, such as a lock, special headed bolts or screws, or a sufficient amount of weight (defined as 59 lbs) to prevent unauthorized access to the structure. All current risers are constructed with a watertight seal that connects the base flange to the septic tank’s inlet valve. Additionally, all new plastic lids are attached to the risers with specific headed bolts and screws, which prevent anyone from easily removing the lid.

Maintaining compliance with these rules will help to prevent children or anyone else from removing or otherwise tampering with the lid. This will eliminate the danger of somebody accidentally falling into the septic tank, which might be fatal in some circumstances. Concrete lids weighing 60 lb

Avoid Additional Cost When You Sell Your Home

Many buyers in Northern Colorado contact home inspectors before they make an offer on a house or apartment. As a result, we have observed that house inspectors will write up existing septic systems that do not have lids on the surface, causing issues for both sellers and purchasers. If you have risers installed on your septic system, you will be less likely to encounter this problem if you decide to sell your home later. Additionally, as a buyer, you may want to think about including risers at the ground level in your new house purchase as an option.

Septic Riser Installation

You’re ready to take your septic system to the next level, but how do you get there? Fort Collins, Greeley, Loveland, and the rest of Northern Colorado may benefit from the installation of top-of-the-line septic tank risers. So what are you waiting for? Get started today! Give us a call at 970-302-0457 right away to save money and secure your system.

Should You Get Risers for Your Septic System? – Septic Maxx

Many people have heard of septic tanks, but few people are familiar with what they are and how they function. Typically, customers learn about septic tanks when they purchase a septic tank and discover that the tank is malfunctioning. The majority of individuals learn the hard way when their septic tank begins to malfunction: septic tanks are expensive, septic tank repairs are highly expensive, septic tanks require regular maintenance, and house insurance does not often cover septic tank damage or problems.

  • While certain septic tank difficulties are unavoidable, there are steps that septic tank owners may do to minimize the likelihood of some issues with septic tank operations and problems, such as the installation of risers, from occurring.
  • The goal of this modification is to make the septic tank more easily accessible.
  • The type of material used in a septic tank is determined by the tank’s size and the surrounding environment.
  • It is often a good idea to install septic tank risers in order to prevent clogging of the tank.
  1. Risers are used to raise the height of the septic tank lid
  2. They are made of steel. Risers are used to keep frost from accumulating. Risers allow tank waste to be removed more quickly and easily

Septic tank lids are raised by the use of risers. Risers are used to keep frost from accumulating; Risers allow tank waste to be removed more quickly and easily; yet, they are not without their limitations.

What Are Septic Tank Risers? – Septic Tank Pumping – B&B Pumping – Top Rated Septic Cleaning Services

Risers are devices that raise the height of the septic tank lid. Risers are used to prevent the accumulation of frost. Risers make it easier and faster to remove waste from tanks.

Septic Tank Risers

Risers are used to raise the height of the septic tank lid. Risers assist to avoid the accumulation of frost. Risers allow tank waste to be removed more quickly and conveniently;

Your Local, Premier Septic Tank Pumping Company

We at BB Pumping are here to help you if your house in the Fort Worth region is in need of septic tank services. We proudly serve residents of Fort Worth, Decatur, Azle, Haslet, and Weatherford among other communities. Septic tank problems may be resolved quickly and inexpensively by our team of experts, and we can also provide you with the regular maintenance you require to keep your septic tank system functioning properly. Call us now to set up an appointment for servicing! OUR PRODUCTS AND SERVICES GET IN TOUCH WITH US

Leave a Comment

Your email address will not be published. Required fields are marked *