What Is Good For Septic Tank Treatment Of Greas? (Solved)

The Green Gobbler Septic Saver is formulated to digest grease, fats, oils, paper, and organic matter to keep your sewer line and septic tank clear. It also helps to reduce odors — no matter how obnoxious they are!

  • Pump your septic tank out. This is the most effective way to get everything out and start with an efficient septic system, free of unwanted grease and sludge. If you don’t want to pump the entire unit out, skim the grease from the top of the tank and remove it. Install a grease trap, otherwise known as a grease interceptor.

What breaks down grease in a septic tank?

RID-X® contains cellulase enzymes, the only enzyme that can digest paper. Breaks down grease. RID-X® is designed to attack grease in your septic tank, breaking it down to slow the accumulation of the greasy scum layer, which, if left unchecked, can compromise the function of your septic system.

Will grease break down in septic system?

Septic systems are designed to break down tissue and waste and nothing else. This is primarily why Fat, Oil, and Grease (FOG) should be kept out of the system. FOGs are usually not broken down by the bacteria in the septic tank but instead float to the top of the tank to form the scum layer.

How do I make my own septic tank cleaner?

First start by mixing a quarter of a cup of Baking soda with a half cup of vinegar and put directly into toilet. Then add two tablespoons of Lemon juice. The baking soda combined with the vinegar causes a chemical reaction that fizzles and helps break down grim and dirt.

Does vinegar dissolve grease?

Greasy Stovetop Vinegar’s acidity helps cut through grease easily. Spray some vinegar and water mix onto a splattered stovetop, let it sit for 10 minutes, and then scrub down with soapy water. It should wipe right off. If not, leave it to sit a bit longer.

How do you dissolve grease?

Just soak a sponge or rag in vinegar, and use it to wipe down the greasy surface. It’ll cut through the grease and grime in one easy step. Vinegar should only be used on non-porous surfaces such as metal, glass, or sealed countertops. If you don’t like the smell of undiluted vinegar, you can dilute it with water.

Can you put bacon grease in a septic system?

3. Keep kitchen grease, such as bacon fat and deep fryer oil, out of your septic system. It is not broken down easily by your system, can clog your drain field, and cannot be dissolved by any readily available solvent that is legal to introduce to groundwater.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

  1. Install an aeration system with diffused air in your septic tank.
  2. Break up any compacted sludge.
  3. Add a bio-activator or microbe blend.
  4. Maintain the aeration system.
  5. Add additional Microbes as required.

Is hydrogen peroxide safe for septic tanks?

Will Hydrogen Peroxide harm my septic system? No – Septic systems rely upon “aerobic bacteria” which thrive in an oxygenated environment. Unlike chlorine/bleach, Hydrogen Peroxide adds oxygen instead of removing it.

Is baking soda good for septic tanks?

Will baking soda hurt a septic system? Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.

What is the most powerful degreaser?

WD-40 Industrial Strength Cleaner and Degreaser You can use it on many surfaces including stainless steel, glass, and aluminum. Beyond the kitchen, this product cuts tough grease on commercial appliances too. It’s one of the strongest degreasers you will find today for your kitchen surfaces.

Does baking soda and vinegar dissolve grease?

Baking soda and vinegar are both effective at cleaning grease. Vinegar is a weak acid that can break down the bonds in grease, while baking soda is a base that can neutralize the acid in vinegar. When mixed, they form a bubbling foam that helps to loosen and remove grease from surfaces.

Does baking soda break down grease?

Baking soda is non-toxic, inexpensive, easy-to-use, and remarkably effective on cleaning oven grease. Baking soda neutralizes acids and breaks down the grease, allowing you to wipe it up without a lot of elbow grease. It’s also a mild abrasive, so it works well at removing dried, stuck-on foods.

How to Clean Grease From a Septic Tank

Image courtesy of mtreasure/iStock/GettyImages.com

In This Article

  • The Removal of FOG from Septic Tanks and the Proper Disposal of FOG are all topics covered in this course.

Sewage treatment systems are a very vital part of your property and of your house. In order to have a fully operating septic system, it is critical to properly care for and maintain the tank and plumbing lines. FOG (fat, oil, and grease) buildup in your septic tank may have a significant impact on its function and, over time, may prohibit it from effectively breaking down solid waste.

Grease Buildup in a Septic Tank

Because you are in the habit of disposing of cooking oil or grease in your home’s plumbing drain system, FOG accumulation in an aseptic tank is the most common reason for this occurrence. Cooking garbage may appear to be the most convenient method of disposal, but what you may not understand is that once it settles in your septic tank, it will harden, forming a barrier on top of the waste already in the tank. It is common for your septic tank to have a FOG layer present. This is referred to as the scum layer in your septic tank, and it includes fats and oils.

The scum layer is only a problem if it grows so thick that it interferes with the proper operation of your septic system, which is rare.

When the scum layer grows excessively thick, it will begin to press down on the liquid waste layer, which is where the exit drains are located, causing the liquid waste layer to collapse.

FOG Removal From a Septic Tank

To ensure that your tank remains in good working order, have it pumped on a regular basis by a professional sewage removal firm. The business will remove all of the trash and scum accumulation from your tank, leaving you with a completely clean and new one. Waiting too long to have the tank emptied might result in foul gas entering the leach field, which may need the excavation of your complete sewage system in order to repair clogged pipes. If you want to break down any oil and grease accumulation, do not flush harsh chemicals that promise to break down scum down the toilet or down the drain.

If you use chemical additives, you will be able to repair the problem temporarily, but you will be generating worse difficulties in the long run.

Rather than just pouring cooking oil or grease down the drain, the most effective approach of preventing FOG accumulation in your septic tank is to properly dispose of any cooking oil or grease.

Once the bottle is completely empty, you can dispose of it in your garbage can.

In the event that you solely prepare plant-based dishes, you can dispose of your cooking oil in your own compost pile.

Fat, oil and grease are really bad for your plumbing and septic system

Fats, oils, and grease (FOG) are derived from a variety of sources, including cooking oil, lard, beef fats, salad dressing, mayonnaise, gravy, margarine, butter, sour dressing, and other condiments. If FOG is dumped down the drain, it may build up in the pipes and create a variety of issues. As FOG accumulates in plumbing, it interferes with the flow of water through the system, which can result in the backup of untreated wastewater into the system. Manholes that are blocked with FOG have the potential to overflow onto yards, parks, storm drains, and roadways, resulting in the pollution of both surface and groundwater sources.

How FOG affects the septic system

Septic systems are intended to break down just tissue and waste; they are not intended to break down anything else. This is one of the primary reasons why fat, oil, and grease (FOG) should be kept out of the food supply chain. Most of the time, FOGs are not degraded by the bacteria in the septic tank, but rather float to the top of it and create the scum layer. The scum will climb to the outlet and begin to force some of the FOG out of the tank if the scum builds up too much in the tank. It is extremely damaging to the aerobic stage of wastewater treatment, which is found in the leach field, when it is present.

  • Scum is also associated with the gases that are discharged into the system, since some of the sludge particles may be transported up into the scum layer by the gas bubbles as they rise through the system.
  • Having airspace enables vegetative molds to speed the entrapment of rising sludge particles, resulting in the formation of a leathery scum layer that is difficult to remove by pumping.
  • The wastewater must be allowed to sit in the septic tank for a period of time in order for the suspended particles to settle into the sludge layer and the FOG to float in the scum layer.
  • However, if the scum layer becomes too thick, the amount of time that wastewater may be retained in the septic tank is significantly reduced.
  • As a result, if this wastewater ends up reaching the soil before it has been thoroughly cleaned, the pathogens contained within it may cause pollution.

Measuring the scum depth

In addition to following the manufacturer’s suggested septic tank cleaning interval, you should evaluate the depth of your scum on a regular basis to verify that it hasn’t gotten too thick. Actually, the depth of the scum is extremely essential information since it may help you determine how healthy your system is and whether or not it is being pumped on a regular basis as it should be. The following principles will assist you in determining when you should plan the pumping of the tank depending on the measurements of scum depth in the tank.

  • Whenever the overall depth of the scum and sludge layer is equal to one-third of the total depth of the entire tank, it is recommended that you pump the septic tank.
  • To determine the depth of the scum, place a 3-inch piece of wood to the end of a long stick and measure it.
  • Make a slow, gentle movement across the layer until you notice a difference in resistance.
  • When you reach the bottom, place a marker at the top of the septic tank’s opening and note the length of your measuring stick from there.

The distance between the two marks you create should be the same as the distance between the bottom of the scum layer and the bottom of the output baffle (see illustration below).

Grease traps

Restaurants generate a significant amount of grease in their kitchens, which can result in a significant number of clogs and other associated concerns. Thousands of dollars are spent yearly by restaurants and other food facilities to deal with plumbing difficulties that are directly connected to FOG, according to industry estimates. The installation of grease traps in all restaurants is mandated by the government as one of the techniques for combating this problem. Grease traps are designed to catch grease before it exits the kitchen and are often positioned directly below the sink in the kitchen or on the exterior of the kitchen.

In-kitchen passive grease trap

As wastewater from the kitchen passes through the unit, these interceptors capture the grease that rises to the top of a tiny baffled tank where it is collected. The grease that has accumulated in passive grease traps in the kitchen will have to be physically cleared from the area. As a result, they should be cleaned on a regular basis (daily or weekly depending on their size and amount of FOG generated). If they are not cleaned on a regular basis, FOG will build up in the traps and be driven into the septic system.

Pre-cast in-ground concrete grease traps

Pre-cast concrete grease traps function in the same way as in-kitchen interceptors, with the exception that they operate on a much larger scale. Pre-cast in-ground grease traps with capacities ranging from 750 to 2000 gallons are the most prevalent. As a result of their size, they are capable of withstanding more FOG, but this also means that they are more expensive to acquire and install. These grease traps are great for large restaurants and are often cleaned on a regular basis by grease pumping firms.

Automatic grease trap

The primary distinction between automated grease traps and the other two types of traps is that automatic grease traps are meant to automatically remove FOG on a timetable that is specified. Because of the automated cleaning mechanism, these traps are quite effective. They are successful at removing at least 98 percent of the FOG present in the wastewater. Because they have the characteristic of automatically eliminating FOG, they are often smaller in size and may thus be readily accommodated in the kitchen space available.

See also:  How Big Is A Septic Tank In Gallons? (Solved)

Conclusion

It is not recommended to dump oil or grease down the sink. When cleaning the dishes, scrape away any fat and oil from the plates before starting to wash them. Instead of putting cooled leftover fats down the drain, you may place them in a plastic container and keep them in the freezer until they are ready to be disposed of. Once the container is completely filled, close the lid and throw it away in the garbage.

Enzymes help cut through fats, oils and greases in septic tank, drain line and sewer applications

Bio – Products, PackagingMarketing ExpertsAll Rights Reserved – Lenzyme – 2010 – 2020Fats, oils and greases, collectively they are called FOG. To wastewater treatment professionals, they usually mean trouble. There are many misconceptions in the marketplace about methods and products for dealing with FOG. A better understanding of biological treatment versus chemical treatment can help you make wise decisions on behalf of your customers and your business. The main reason FOG is troublesome is that it is not water-soluble, it eventually separates from water. Grease is lighter than water, so it floats to the top. If not treated, grease molecules combine to form a hard grease layer. Or, worse yet, the grease combines with other materials such as soap residue, paper, and solids. When this happens in a septic tank, a very hard crust can form on the surface of the water in the tank. If left untreated it could flow out to the drainfield and cause drainfield backups. In a plumbing system, grease traps, drain lines, and sewers can become clogged. Usually, an overload of FOG is what causes stoppages in flow.Understanding Enzymes:Enzymes are one kind of remedy for FOG problems. An enzyme is a catalyst (something that makes a chemical reaction go faster). They are not living cells like bacteria. Instead, they are a special kind of protein, and in a way, they behave like energy. Consider a cornfield. As corn grows into a mature plant, it produces corn oil and sugars. It does this by taking carbon dioxide from the air and water from the soil, then putting them together with the help of the sun’s energy, in a complex process called photosynthesis. The sugars and oil become food products, which people consume almost daily. Eventually, the materials end up in the septic tank. How does nature convert the sugar and oil back into carbon dioxide and water? With enzymes. The reverse biological process happens with the enzymes providing impetus. Enzymes are not consumed in chemical reactions, they simply help the reactions along. For example, the starch digesting enzyme amylase, from barley malt, is used in the fermentation of beer. The fermentation process lasts for days, and the enzyme is active throughout. At the same time, an enzyme is slowly depleted as the reactions proceed, just as a battery in a flashlight wears down each time the switch is turned on. Batteries come in many sizes and strengths, and the same is true of enzymes. Some last just minutes, some last for days.Enzymes help cut through fats, oils and greases in septic tank, drain line and sewer applicationsBy Glenn GajeskiPublished in the “Pumper Magazine” – AprilBut as the temperature falls farther down the line, the grease molecules come back together. The grease has not been reduced only repositioned. Many things can cause grease to break apart. Chemical drain openers cause reactions that can increase the temperature. Other chemicals, called solvents and surfactants, can actually dissolve grease molecules. But once these chemicals wear off, or the temperature drops, the grease molecules combine again.The Anatomy of Grease:Enzymes can work effectively on grease. To see how, it helps to understand how grease molecules are put together. Fats, oils, and grease are in the group of chemical substances called lipids or triglycerides.They are composed of three parts fatty acid to one part glycerol. Of course molecules are tiny, one triglyceride molecule does not do much on its own. One fan sitting in Lambeau Field (home of the Green Bay Packers) would look inconsequential. But add 75,000 fans doing “the wave,” and you have what seems like one big living object. So it is with triglycerides. Once they begin to attach to each other, they can become a big grease clog. Service professionals report finding grease chunks the size of boulders in some larger grease traps. Fat molecules keep attaching to each other until something disrupts the process. For example, if hot water is poured on a chunk of grease in a drain, some of the outer molecules will dissolve off and become free-flowing again.Therefore, some of the grease is actually eliminated. How much depends on many factors, pH, temperature, and how long the process goes on. Even if bacteria do not completely consume the fatty acids and glycerides, they will not reform into grease molecules or grease clogs. This is the biggest misconception about enzymes. Many claim that the grease is just pushed further down the line to form a problem elsewhere. Although this may be true with some cleaning methods and chemicals, it is not true of enzyme and bacteria treatments. Once the enzyme lipase has destroyed the connections, the grease will not form again down the line. In fact, the enzymes help the wastewater treatment process by starting biological treatment far upstream. The uneaten fatty acids and glycerides will remain water-soluble and will flow with the wastewater to the final treatment location. This is not to say that enzymes are a cure-all. For example, some wastewater treatment plants cannot handle high loads of water-soluble fatty acids and glycerides. But most treatment plants would rather have those substances than untreated FOG. This bioremediation process using enzymes and bacteria is done everyday by huge municipal wastewater treatment plants all over the world.How Enzymes Attack:Enzymes attack grease in a much different way. The enzyme lipase actually attacks the grease molecule and destroys the connections between its components. The lipase enzyme breaks the molecules into the three fatty acid units and the one glyceride unit. These have no way of connecting with other grease molecules to form hard grease deposits. At this point, the bacteria present will start to feed on the fatty acids and the glycerides, converting them back to their basic components of carbon dioxide and water.The broken up fats in the water are able to bypass the grease trap, move downstream, and cause grease blockages. Solvents and surfactants are not the same as enzymes they only change how the grease looks and feels. Enzymes actually change the character of the grease into water-soluble components, which will never reform as grease anywhere downstream. Surfactants can be beneficial in that they help enzymes work. Enzymes and bacteria only work on the surface of a substance. When a surfactant is used, more surface area is exposed. A surfactant will turn a chunk of grease floating in water into many droplets. This gives the enzymes and bacteria more surface area to attack and digest the grease.Solvents and Surfactants:The way enzymes work is far different from the way solvents and surfactants work on grease. In simple terms, a solvent turns hard grease into a liquid state without changing its actual character. It does this by temporarily breaking the bonds of molecules (not the fatty acid and glycerides of the molecules) so they dissolve in water. The water then carries the grease downstream until the solvent wears off, at which point the grease reforms. Surfactants (short for “surface active agents”) emulsify two substances together so that they look like one.When a surfactant is used on grease in water, it does not break the fat molecules into pieces but instead separates them from each other so that they mix with the water. The best example of this is the Dawn dish soap commercial that starts by showing a thin layer of grease on top of dishwater. When a drop or two of the detergent is added, the grease magically “disappears.” The dish soap is a surfactant. What you don’t see is that the grease layer returns when the surfactant wears off. Wondering what they use to clean waterfowl that have been caught up in oil spills? You guessed it soaps and strong surfactants. One reason restaurants have trouble with grease in their drain lines is because their dish and laundry cleaners are high in surfactants.Choose the Right Tool: There are many methods and many products for dealing with FOG. Each used in the right conditions can do the job correctly. Most wastewater treatment plants use some form of biological treatment to clean the water of organic material, including FOG. Biological treatment involves both enzymes and bacteria. Enzymes help provide the bacteria with food. Although enzymes are not magic, they are biological facts of nature that can be valuable allies in the war against grease.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently.

The maintenance of a vehicle is comprised of four major components:

  • Inspect and pump your drainfield on a regular basis
  • Conserve water
  • Dispose of waste properly
  • And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

  • The size of the household
  • The total amount of wastewater produced
  • The amount of solids present in wastewater
  • The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

  • Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
  • Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.
See also:  What Caises Wster To Lay At Mouth Of Septic Tank? (Perfect answer)

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

  • Cooking grease or oil
  • Wipes that are not flushable, such as baby wipes or other wet wipes
  • Photographic solutions
  • Feminine hygiene items Condoms
  • Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed!

Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

  • If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
  • Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

  • The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

  • It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that exits your septic tank. You should perform the following to keep it in good condition:

Maintain Your Septic System Naturally

On December 5, 2020, the information was updated. However, while this isn’t an enjoyable topic for polite discussion, having your septic system back up into your home is far from pleasant. There are actions that you can do to not only avoid septic issues in the future, but also to guarantee that the process of breaking down flushed waste proceeds as it should.

A Well-Functioning Septic System

The title of this article may be “The Care and Maintenance of the Gut in Your Yard,” which would be more descriptive. Understanding the necessity and advantages of eating dietary fiber, alkaline-forming foods, and taking probiotics for your own gut health will help you recognize the similarities between keeping a healthy septic system and maintaining a healthy digestive system. There are some items that you should avoid putting into any septic system, just as there are certain substances that are favorable to putting into our own digestive systems.

If you wait until there is a problem, you have waited too long and should contact a septic cleaning firm to pump your tank immediately.

Septic System Care and Maintenance Tips:

  • A family of four living in a house with a 1,000-gallon tank should have their septic system cleaned every four years, according to the EPA. Inquire with your local septic cleaning firm about how frequently you should contact them
  • Avoid using bleach-containing solutions to clean your toilets since it kills the bacteria that are necessary for the breakdown of waste particles in your septic system. Try this all-natural toilet cleanser
  • It works great.
  • When you add yeast to your septic system, it helps to aggressively break down waste particles, which is beneficial. Using the first time, flush a 12-cup package of dried baking yeast down the toilet. After the initial addition, add 14 cup of instant yeast every 4 months for the next 4 months. For those who are planning to install or have their existing septic system pumped, it’s a good idea to know precisely where it is in your yard so that you don’t have to dig up a lot of your lawn when the system is pumped in the future. With a tape measure, measure the precise distance between the septic tank lid and the home, and then snap a photo of the exact distance with your mobile phone to prove you were accurate. Maintain a copy of the snapshot in a home maintenance file on your computer for future reference.
Deborah Tukua

Deborah Tukua is a natural living and healthy lifestyle writer who has written seven non-fiction books, including Naturally Sweet Blender Treats. She lives in Hawaii with her family. Since 2004, she has contributed to the Farmers’ Almanac as a writer.

Keep Exploring

Septic tank products manufactured by REX-BAC-T ®Technologies are committed to providing the most comprehensive line of industrial strength products for septic tanks available on the market today. We have developed a superior blend of septic tank treatments that are specifically designed for septic tanks, cesspools, drain and leach fields, drywells, and pit toilets. Our environmentally safe, 100 percent natural, high quality septic products get to work right away, quickly digesting complex organic waste and compounds, providing the fastest action available in a bacterial septic treatment product on the market right now.

For the complete digestion of grease, fats, oils, sludge, paper, and other organic materials that are discharged into today’s septic systems, cesspools, and leach lines, we have carefully selected microbe species that are the strongest and most effective available.

For additional information, please see our Septic SystemFAQs, which can be found HERE.

The Best Septic Tank Treatments

It’s easy to forget about your septic tank, which means it’s also simple to forget about the regular maintenance that needs to be performed on it. You rely on your septic system on a daily basis, so if you neglect to do routine maintenance, you might find yourself in a stinky situation.

Why are Treatments Important?

Septic tanks function by transporting wastewater from your property down into a tank. Afterwards, bacteria within the tank dissolves and eats the waste, dividing it into solids and liquids as a result. The liquids are subsequently channeled into the earth through perforated pipework. A drain field is the name given to this particular stretch of terrain. When liquids move through the drain field, the layers of rocks, minerals, and dirt purify the water before reintroducing it to the groundwater system, resulting in cleaner water.

A septic tank treatment should be applied on a regular basis in order to give the beneficial bacteria in the system a boost.

Along with monthly treatments, it is advised that you empty your tank once every two years or sooner if possible.

Different Types of Treatments

The use of inorganic acids or alkalis can quickly clear a clog, since these potent substances have the ability to dissolve any blockage in seconds. However, since they are so strong, if they are not properly diluted, they might eliminate the vital bacteria that is required for your tank to function properly. If this occurs, raw sewage can run into the drain field, resulting in unpleasant aromas, leaking into nearby groundwater, and the general weakening of your drainage system. Gasoline Peroxide — When used in the right concentrations, hydrogen peroxide may be an excellent clog-removal solution that does not affect the bacterial environment in your tank.

As a result, it is not a smart alternative for long-term maintenance of your septic tank.

They are effective as a septic tank treatment because they break down oils, grease, and fats that accumulate at the bottom of the tank.

Instead, they seep into the groundwater system and have the potential to inflict ecological harm; as a result, they are prohibited from usage in some jurisdictions.

These function by increasing the number of bacteria in the system and introducing enzymes that break down fibers, scum, and solid waste. When you keep your tank’s ecology healthy, you’re also helping to keep the rest of your system healthy, including the drain field and local groundwater systems.

Important Factors

Type of Septic Tank Treatment – Septic tank treatments are available in a number of forms, with the most popular being pods, tablet form, powder, and liquid. Pods and pills are the most common options since they are handy and come in pre-packaged quantities that are easy to administer. Powders, on the other hand, are a little more difficult to work with because they require you to measure out the exact amount for the size tank you are using. When it comes to liquids, the doses must be calibrated in the same way that powders are, however these sorts of treatments are only intended for major blockages and not for routine cleaning.

  • As an alternative, you must take into account the size of your septic tank.
  • The medication may have the unintended consequence of disrupting the bacterial environment and altering the enzyme balance to an excessive degree.
  • Price – When purchasing a treatment, price should always be a consideration, and in this situation, price does influence the quality of the therapy.
  • Tank treatments that are reasonably priced range in price from $15 to $35 for a product that will last a number of months.

The Most Recommended Treatments

  1. The Best Overall: Cabin Obsession Septic Tank Treatment
  2. Excellent for Those on a Budget: Cabin Obsession Septic Tank Treatment Green Gobbler SEPTIC SAVER Bacteria Enzyme Pacs
  3. Best for Clogs: Green Gobbler SEPTIC SAVER Bacteria Enzyme Pacs Septic Shock, 1868, with Instantaneous Power
  4. The Most Effective Monthly Treatment: When purchasing in bulk, Walex BIO-31112 Bio-Active Septic Tank Treatment Drop-Ins are the best value. GreenPig Solutions 53 Concentrated Septic Tank Treatment is also a good choice.

Super Terry knows Septic Systems

Those on a tight budget will appreciate: Cabin Obsession Septic Tank Treatment, which is rated as the best in the industry overall. Best for Clogs: SEPTIC SAVER Bacteria Enzyme Pacs from Green Gobbler; SEPTIC SAVER Bacteria Enzyme Pacs from Green Gobbler; Septic Shock in 1868 with Instant Power Treatment that works well on a monthly basis is: It is best to purchase in bulk: GreenPig Solutions 53 Concentrated Septic Tank Treatment; Walex BIO-31112 Bio-Active Septic Tank Treatment Drop-Ins; Walex BIO-31112 Bio-Active Septic Tank Treatment Drop-Ins;

Septic System Dangers: Grease Buildup – Septic Maxx

Grease and fat can easily cause your septic system to collapse if they are dumped into it in excess. Residential septic tanks are designed to handle both common sewage and domestic waste, which is why most people have them. The effectiveness of a residential septic system is dependent on a variety of factors, including the number of people living in the home, the amount of water consumed, and the kind of items that are flushed down the toilet. Grease and fat are among the chemicals that might cause problems for your septic system and should be avoided at all costs to avoid septic system failure.

  1. In this case, there are three distinct layers: Sludge is a type of waste that has not yet been broken down and is found near the bottom of the water table.
  2. The top layer of your septic system, also known as the scum layer, is where light particles and waste, such as oil and fat, enter your system.
  3. Given that grease and fat have a tendency to thicken greatly over time, it is possible that the scum layer will be pushed into the liquid layer, causing the liquid layer to seep out of the septic system’s exit pipes.
  4. How to remove oil and fat from a surface: If you notice that oil and fat have accumulated in your septic tank, you will need to get it cleaned out immediately.
  5. Grease and fat may be removed from a septic system by pumping and disposal, but this should only be done by a professional septic tank servicing firm to ensure safety.

The removal of oil and fat from your septic system must be done as soon as possible; else, your septic pipes may have to be dug up and replaced.

3 Tips for a Healthier Septic System

It should go without saying that regular maintenance is the most effective approach to keep your septic system in good working order. However, did you realize that correct function has a lot to do with the “health” of the bacteria that live inside your septic system? Your tank functions as a small waste water treatment plant, breaking down sediments with care, separating heavy particles to the bottom of the tank, and flushing “clean” water out to your drainfield, where it gently filters back into the earth.

See also:  What Is Safe For A Septic Tank? (Question)

Continue reading to gain a greater understanding of the inner workings of your home’s most important utility, or contact us now to schedule your Lancaster Pa septic treatment.

How Things Work

It is critical to understand how your septic system works in order to properly maintain it. Septic tanks are a very simple system that properly treats and recycles wastewater. It is powered mostly by gravity, fluid dynamics, and microorganisms, and it does so in an environmentally friendly manner. To be precise, healthy bacteria are required for the correct operation of your septic tank since they break down waste materials. We’ve become accustomed to viewing bacteria in a negative light, as seen by the profusion of disinfectants, sanitizers, and anti-bacterial items that can be found in almost every home.

The collapse of “dead” septic tanks is becoming an increasingly common occurrence.

How to Keep Your Septic System Healthy

  1. Avoid using chemicals for flushing or rinsing, as well as paint or anti-bacterial products. It’s going down the drain A variety of substances such as sulfates, chemicals, paint thinners, and cleansers can upset the delicate balance of beneficial microorganisms in your septic tank. Avoid flushing or washing any of these substances down the drain, or dilute them as much as possible if it is absolutely essential to flush or rinse them down the drain. It’s possible that you’ll need to invest in a septic system additive if you run a grooming business, carwash, or at-home salon that uses harsh products on a regular basis. Septic system additives can help maintain the healthy balance of bacteria in your tank, allowing waste water to properly filter through your drainfield and back into the ground. (Read on for additional information in Tip2!)
  2. Bio-Active or another septic system additive should be used. Every month, adding a little amount of Bio-Active will help to replenish the good worker bacteria and enzymes that will help to combat the effects of home disinfectants. Bio-Active makes it simple to maintain a clean and sterilized home environment, as well as a healthy bacteria population in your septic tank, thanks to its unique formulation. The use of Bio-Active on a monthly basis will aid in the reduction of surface and bottom particles in the septic tank. It is possible for a buildup of surface and bottom solids to migrate into the leach field, causing the leach field to become blocked. Once the system becomes blocked, there is nowhere for the water to escape, and the tank begins to fill, resulting in a backup in the house and puddles in the yard. The use of Bio-Active helps to reestablish the biological population of beneficial worker bacteria and enzymes that help to remove particulates in the water. The beneficial bacteria are also transported to the leach field, where they aid in the reduction of sediments and the prevention of blockage. A blocked leach field is the most serious problem that can occur in a septic system, and it is also the most difficult and expensive to fix. Click here to find out more about Bio-Active Septic System Additive or to obtain a sample at your next septic service appointment.
  3. Whenever possible, avoid using a garbage disposal and NEVER flush grease or food products down the toilet. Unless you have a trash disposal that can handle large amounts of waste, you should refrain from utilizing one entirely. Garbage disposals have been shown to increase the quantity of solids in a septic tank by as much as 50% in some cases. Having second thoughts about getting rid of your garbage disposal? We understand what you’re saying. Depending on how frequently you use your garbage disposal, it may necessitate more frequent pumping
  4. Nonetheless, you have the last say. The most important thing to remember is that garbage disposals are not garbage cans
  5. Thus, whenever in doubt, throw it out! When it comes to lubricant, use caution. Grease may cause chaos in your septic tank by thickening the water and disrupting the natural balance of beneficial bacteria that your tank requires to break down particles and waste. Cooking trash that has been improperly handled is one of the most significant contributors to excess oil in your tank. Excess fat should be disposed of properly, whether you’re frying bacon, draining the drippings from your Thanksgiving turkey, or just cleaning your greasiest cooking pans. Oil and grease are not only harmful to your septic tank, but they may also accumulate within your pipes over time, limiting the streams that carry wastewater to your septic tank. Grease accumulation is the most common cause of septic system backups, and clearing obstructions frequently necessitates the use of high-pressure jetting.

Follow these guidelines to build a septic system that will efficiently handle your wastewater for many years to come. Make sure to get your tank pumped out every 2-4 years, and don’t hesitate to contact us if you have any septic-related issues or requirements! Providing dependable septic tank pumping in Lancaster, Pennsylvania and the neighboring regions is something we take pride in.

CLR® Healthy Septic System

  • The only septic system treatment to be paired with thePart of the Environmental Protection Agency’s Safer Choice Program, which recognizes the product as a safer alternative to typical chemicals. It works instantaneously, can be used at any time of day, and its revolutionary stabilization method allows live, active bacteria to be put into the septic system. It is available in seven different treatments for systems up to 2000 gallons in capacity. Unlike rivals’ products, this revolutionary composition does not contain any detergents, preservatives, or inactive “carriers” that germs might adhere to while in use
  • Instead, it contains only natural ingredients. In comparison to dry septic system treatments, which can only be flushed down toilets, this product may be put down any drain and contains more environmentally friendly components. The precise stability of good bacteria required to help maintain your system working at peak efficiency is restored by this treatment. Solid organic waste such as detergents, soaps, grease, and paper may pile up in your septic tank and must be broken down before it can be securely disposed of into the earth. All of the components of the CLR Healthy Septic System are ecologically friendly. Safe for use on all types of pipes, drains, and porcelain

Look for CLR Healthy Septic System in these sizes

  • Directly into any toilet or drain pipe, pour 4 ounces of the solution. Do not combine with any other type of chemical drain cleaning solution. It is most effective when taken during periods of low water consumption.

In accordance with the California Cleaning Products Right to Know Act, it was found that this product did not need to be disclosed.

Water CAS7732-18-5 Meets EPA Safer Choice Criteria
CAS7732-18-5. Reverse Osmosis (RO) is a water treatment process that removes contaminants from water by passing the water through a membrane, (filter), where contaminants are filtered out yielding more pure quality water.
Sodium Nitrate CAS7631-99-4 Meets EPA Safer Choice Criteria
CAS7631-99-4. It can be used as an additive in industrial greases, as an aqueous solution in closed loop cooling systems, and in a molten state as a heat transfer medium. It is also a common food preservative.
Pseudomonas Putida CAS68332-91-2 Meets EPA Safer Choice Criteria
Monoammonium Phosphate CAS7722-76-1 Meets EPA Safer Choice Criteria
Sodium Thiosulfate CAS10102-17-7 Meets EPA Safer Choice Criteria

This product may include one or more of the following ingredients:

Red No. 40 CAS25956-17-6 Meets EPA Safer Choice Criteria
YellowNo. 5 CAS1934-21-0 Meets EPA Safer Choice Criteria
CAS1934-21-0. A synthetic lemon yellow dye used all over the world, primarily as food coloring.As part of theEPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients.
Acid Blue No.1 CAS3844-45-9 Meets EPA Safer Choice Criteria
CAS3844-45-9. A blue dye used for foods and other substances.As part of theEPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients.

How do I use CLR Healthy Septic System?

In addition to being safe on pipes and porcelain, CLR Healthy Septic System is effective on fats, oils, grease, and other difficult organic debris. A septic system is a type of subterranean wastewater treatment system that is self-contained. A septic tank and a leach/absorption area are the two main components of a septic system.

What is a septic system’s purpose in the household?

The tank’s primary function is to handle waste generated in the home. When the waste is placed in the tank, the water drains to the bottom, the lighter solids rise to the top, and the heavier waste/sludge sinks to the bottom, resulting in effective waste treatment.

The sludge/solids that settle to the bottom of the tank must be treated with a septic system treatment in order to transform these materials into liquids, which will then flow to the drain field below.

Household Products That Will Ruin Your Septic Tank!

Many people who have septic tanks are unaware of what they may and cannot flush down their toilets or down their sinks. It may come as a surprise to find just how delicate septic tanks are, and how many common household goods can cause harm to and/or block your septic tank if you don’t know what you’re doing. By keeping these things out from your drains, you can maintain your septic tank in good shape and avoid costly septic repairs down the road. Chemical Cleaners are a type of cleaning agent that uses chemicals to remove dirt and grime.

You may disturb the bacteria cycle in your septic tank by pouring anti-bacterial cleansers like bleach down your drains and down your toilets.

Additives Several septic tank additives make the promise that they will enhance the amount of bacteria in your septic system.

The Environmental Protection Agency and the American Ground Water Trust, on the other hand, warn that chemical additions may cause more harm than good to your tank.

Using Bath Oils Oil floats to the top of your septic tank, where it congeals and hardens to produce a layer of scum on the surface.

It has the ability to withstand bacterial activity and embed in the solid waste layer.

Grease from the kitchen Grease of any kind contributes to the buildup of scum in your septic tank.

Unless otherwise instructed, you should avoid dumping oil down your sinks.

In addition, dryer papers might jam the entrance baffle.

Over time, the clay will clog your pipes and cause your septic tank to fail completely.

Products Made of Latex The majority of latex-based products are not biodegradable.

If the outlet tee is missing, the latex may clog the drain field on its way out of your septic tank, causing it to back up and choke the tank.

Paints and oils are two types of media.

In order to maintain your soil and groundwater free of diseases, you must have this bacterium on hand.

Prescription medications and chemotherapy medications Even after passing through a patient’s digestive system, powerful medications may still retain active ingredients that are harmful to them.

If possible, avoid allowing drug-contaminated faeces to enter your home’s septic tank.

Some prescription medications have the potential to be harmful to the environment.

Chemicals for Automatic Toilet Cleaning Systems Automatic toilet cleaners release an excessive amount of anti-bacterial chemicals into your septic tank, causing it to overflow.

Instead, choose toilet cleansers that are suitable for septic systems.

Even minute amounts of string, on the other hand, can clog and ruin pump impellers.

In a period of time, it will encircle a pump and cause harm to your septic tank’s mechanical components.

Your tank is only capable of holding a specific amount of domestic water; it cannot accommodate big volumes of water from a pool or roof drain.

Don’t use your sinks or toilets as garbage cans; this is against the law.

Put your trash in the garbage to prevent having to pay extra in pump-out fees.

Young children, on the other hand, may be unable to comprehend how toilets function.

Rather than degrading, the clothing are likely to block your septic tank.

Butts for Cigarettes Cigarette filters have the potential to choke the tank.

For a comprehensive list of potentially dangerous goods, consult your septic tank owner’s handbook or consult with a specialist.

If possible, avoid flushing non-biodegradable goods down the toilet or down the drain. You will save money on costly repairs and you will extend the life of your tank by taking these precautions.

Leave a Comment

Your email address will not be published. Required fields are marked *