What Is A Septic Tank Conversion? (Solved)

mantair.com

  • A septic tank conversion is a method of upgrading a septic system that may be old, broken, or failing to meet treatment standards. Wastewater treatment professionals usually recommend this option when the existing sewage system retains some levels of functionality and could still be useful in treating the sewage.

What is a septic conversion?

Septic to sewer conversion is a plumbing service that involves decommissioning a septic system and rerouting septic sewer drain pipes to city sewer line connections. When your septic system is in good condition, a septic conversion is a straightforward effort for licensed plumbers.

Do septic tank converters work?

A septic tank conversion is an extremely cost-effective method of upgrading any polluting septic tank as the system is installed within the existing tank structure, removing the need for any major excavation works or heavy machinery.

Can you convert a septic tank into a treatment plant?

A septic conversion unit is a tertiary treatment plant which can be installed and connected to a pre-existing septic tank. The septic conversion unit treats the wastewater to a sufficient quality allowing it to be discharged to surface water.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

Is it bad to have a septic tank?

One of the biggest disadvantages of septic systems are the hassles that comes with sewage backup, which is generally a sign of clogging in the tank or drain field pipes. When backups occur, the problem is more serious than a simple household drain clog because the obstruction won’t be found just inches down the drain.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Can you upgrade an old septic tank?

bioCycle™ provide a complete service for replacing your existing septic tank or sewage treatment system. The superior bioCycle™ System overcomes all the problems associated with septic tanks and defective treatment systems.

Do I have to replace my septic tank by 2020?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

Can I add an aerator to my septic tank?

The SepAerator® Septic Tank Aerator from Septic Solutions can be added to any existing septic tank to rejuvenate failing secondary treatment systems such as drainfields, mound systems, and sand filters. This system was designed by experts with over 25 year experience in the aerobic treatment industry.

How much does it cost to convert a cesspool to a septic system?

How Much Does It Cost to Replace a Cesspool with a Septic Tank? Depending on the size of your home and the number of people living in it, a septic tank replacement can run you anywhere between $4,000 to $6,000 or more for a larger home.

How does a Mantair work?

The Process. Once installed, the Mantair septic tank conversion unit separates the existing tank into two compartments / zones. The majority of the existing tank is transformed into an Aeration/Mixing Zone. Air is supplied to this zone via an aerator contained within a draught tube.

What is the difference between a septic tank and a septic field?

The septic tank is a buried, water-tight container usually made of concrete, fiberglass, or polyethylene. The liquid wastewater (effluent) then exits the tank into the drainfield. The drainfield is a shallow, covered, excavation made in unsaturated soil.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How big of a septic tank do I need?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

Septic Tank Conversion as an answer for failing septic tanks

Fabian Belin published an article on May 27th, 2015. If your septic system is deteriorating, septic tank conversion units may be the best option for you to update your septic system. For any septic tank conversion to a comprehensive sewage treatment system, trickling filters “retrofit applications” are the most effective options available. This service includes the conversion of your old septic tank into a fully operational three-stage sewage treatment system. The finished effluent will be sufficiently clean to be dumped into the environment.

Trickling filters as septic tank conversion unit: the best solution for failing septic tanks

Fabian Belin published an article on May 27, 2015 about If you have a failing septic system, septic tank conversion units may be the best option for you to update your septic tank system. For any septic tank conversion to a comprehensive sewage treatment system, trickling filters “retrofit applications” are the best answer. This service includes the conversion of your current septic tank into a fully working three-stage wastewater treatment system. Finally, the finished effluent will be sufficiently clean to allow it to be released into the environment.

There are two types of septic tank conversion units

  • The “in-tank” systems are designed to be installed into an existing conventional septic tank. These systems do not have the EN 12566 testing certificate, and as a result, they are not eligible for an exemption from the Environmental Agency. Furthermore, there is no European Standard for ‘in tank’ conversion units, and these “in-tank” choices, also known as “add-on” septic tank conversion units, are unable to earn a CE Mark since there is no European Standard. These tanks are added following the installation of a septic tank, transforming the current septic system into a fully certified sewage treatment plant that will meet with the Environmental Protection Agency’s sewage treatment standards. These “additional” units must be evaluated in accordance with EN 12566.

Add a trickling filter after an existing septic tank, and the old septic tank is transformed into the primary tank of a “three-stage” sewage treatment plant. The trickling filter will be linked to the current tank’s water output via which it will filter the water. Water that has been treated will be clean enough to be released directly into surface water such as a stream or ditch if the appropriate permission or exemption has been obtained from the Environmental Agency.

The advantages of our septic tank conversion option

  • There is no need to construct a new, large-scale storage tank or sewage treatment facility. Installation in a short period of time will save you both time and money. Because of the small footprint and lack of extensive groundwork, you will be able to keep your garden free of large installation interruptions. Benefits of a comprehensive three-stage nonelectric sewage treatment plant are the same as for an electric sewage treatment plant: commissioning costs are low, desludging intervals are lengthy, there are no electrical expenditures, and maintenance is minimal. The Environment Agency accepts direct sewage plant discharges to surface water as long as they comply with the EA consent to release guidelines. Production of an effluent that is clean and odorless

How does our septic tank conversion works?

The installation of a new, heavy-duty tank or sewage treatment facility is not necessary; Time and money will be saved by completing the installation process quickly. You will be able to keep your landscape free of significant installation interruptions because to the small footprint and lack of extensive foundation. A comprehensive three-stage non-electric sewage treatment facility offers the following advantages: Commissioning is inexpensive, desludging is done at extended intervals, there are no electrical bills, and maintenance is minimal.

Obtaining an effluent that is transparent and odorless

Installation and Licensed Contractors of septic tank conversion units

Our septic tank conversion device will be provided and installed by a registered and trained installer from our network, who will also provide the necessary training. Our installers provide a complete and thorough service, from the first site study to any after-sales assistance that may be required. An initial and complimentary site study is included in our premium service, as is a comprehensive installation service and the commissioning of your converted septic tank. It is our goal to help you attain a final effluent quality that completely conforms with the Environmental Agency’s regulations for direct discharge into a natural watercourse using our septic tank conversion equipment.

When your existing septic tank is releasing untreated wastewater straight into a waterway, the BIOROCK septic tank conversion option is the best choice. Our septic tank conversion equipment is available in capacities ranging from 5 to 30 PE (People Equivalent).

Septic Tank Conversion

It is not uncommon for a wastewater treatment specialist to advocate septic tank conversion as an appropriate cure for an overburdened septic tank or sanitary sewer system. While it sounds exciting, it is not clear what it signifies, why it is essential, or how much it will cost. Here, we’ll go through what it takes to turn a septic system into an operational wastewater treatment plant. Read on for more information!

Why convert a septic tank?

A septic tank conversion is a means of updating a septic system that is either old, damaged, or not performing up to treatment specifications. The usage of this alternative is typically recommended by wastewater treatment specialists when the present sewage system retains some levels of functioning and might still be effective in the treatment of sewage. In general, converting a septic tank entails the addition of specialized treatment equipment to the already-existing infrastructure. Conversion units and kits are terms that industry experts frequently use to describe this type of equipment.

Inadequate septic tanks represent a hazard to both water quality and public health by polluting groundwater supplies and exposing us to microorganisms that are harmful to our health.

coli bacteria per litre of effluent from a normal household septic tank, according to the Environmental Protection Agency.

coli and coliform bacteria, which is zero.

Different types of sewage system conversions

What varies from case to case is the location of the conversion unit in respect to the existing septic tank. Installing after a septic tank refers to connecting the unit to the septic tank’s output, or to the unit’s location downstream of the septic tank. An add on is a specific sort of converter unit that performs this specific function. Essentially, the septic tank serves as a major wastewater treatment system in this situation. In this case, the advantage is that it will capture slowly degradable materials such as baby wipes and tampons while the conversion unit completes the duty of cleansing the wastewater.

Due to the fact that there is no European Standard for in-tank kits at this time, they will not be able to receive the CE mark.

When it comes to wastewater treatment, however, in-tank conversion kits might be equally as successful as conventional methods.

It must be capable of improving the current quality of the effluent to acceptable levels, and you should request verification of this capability from the provider.

If you are considering purchasing an in-tank conversion unit, you should consult with the appropriate municipal government to get their opinion on the topic. It will be determined by the general binding norms in effect in your area.

What will a conversion kit cost?

In most cases, a septic tank conversion will be less expensive than the construction of a new sewage treatment plant. However, you must be confident that it is the most cost-effective long-term solution before going forward with it. Here, the health of your current sewage system is critical, and you should seek the advice of an expert in the field of wastewater treatment in this situation. Regardless of whether you choose an add-on conversion kit or an in-tank conversion kit, you’ll need access to your septic tank as well as a power source, as the majority of conversion devices require energy to work.

  • Once the conversion unit is installed in the ground, the technician will connect the septic tank outlet to the unit.
  • Generally speaking, the conversion of your septic tank is a beneficial and cost-effective solution to improve the operation of your sewage system; however, this is only true if the existing septic tank is in good shape.
  • In order to demonstrate the effectiveness of his or her conversion method, any reputable wastewater treatment specialist will give the necessary test results.
  • Use the contact form below to ask a question or to get in touch with us:
See also:  How To Connect 6 Inch Pvc To Plastic Septic Tank? (TOP 5 Tips)

Septic Tank Conversion

From quotation to finish, it was a terrific experience. much less expensive than the competition Beachcomber Mr. Stokes, Surfleet (ConSept – New Installation) The two engineers/fitters were professional, courteous, and knowledgeable. They completed the installation in a timely manner and left the site in good condition. Deputy Mayor of Suffield, Ms. Bridesow (ConSept – New Installation) From the initial consultation until the installation, we provide professional and efficient service. The personnel was quite kind and helpful, and they ensured that the entire process went as easily as possible.

  • Whittlesey, Whittlesey, Whittlesey (ConSept – New Installation) Installation that is well-done and orderly.
  • Mr Grange, Ware (ConSept – New Installation) Every member of your team, both in the office and on the job site, worked tirelessly to ensure that our expectations were exceeded on several occasions, and Jason and James were outstanding.
  • I would recommend them to anybody.
  • Mr.
  • Wood are married (ConSept septic tank conversion installation) It was the installation of ConSept technology that provided a solution to my septic tank issues.
  • Mr.
  • All of the employees were courteous and reassuring.
  • This book comes highly recommended.

Mr. Bishop (ConSept septic tank conversion installation) completed the job in less than three hours. All of my appointments were completed on schedule. Excellent customer service for any questions you may have. Mr. and Mrs. Crump (ConSept septic tank conversion installation)

Septic Tank Conversion Units

from first quote to final finish, it was a wonderful experience cost-effective in comparison to competitors Beachcomber Mr. Stokes of Surfleet (ConSept – New Installation) The two engineers/fitters were professional, courteous, and knowledgeable, and they completed the installation in a timely manner and with minimal disruption to the site’s normal operations. a woman from Suffield named Ms Bridesow (ConSept – New Installation) Starting with the first consultation and continuing through the installation process, we provide professional and efficient service.

  1. Already, the outcomes have beyond our expectations – thank you very much.
  2. Mr Grange, Ware (ConSept – New Installation) We were repeatedly surpassed in our expectations by every member of your personnel, both in the office and on the job site, and Jason and James were outstanding.
  3. I would recommend them to others.
  4. The Woods, Mr and Mrs (ConSept septic tank conversion installation) I was experiencing septic tank issues, and installing ConSept technology provided the remedy.
  5. In the words of the late Mr.
  6. Friendly and reassuring service from all members of the staff a new drainfield was installed in a short period of time with little disruption.
  7. Mr.
  8. Everything went according to plan.
  9. The Crump’s, Mr.
  10. (ConSept septic tank conversion installation)

To This

This is the same wastewater that was treated in a Vortex Septic Tank Conversion Unit after it had received secondary treatment. There are two sorts of septic tank conversion units and kits to be aware of: the good and the bad.

  1. The term “ADD-ON” refers to a sewage treatment plant that is placed after an existing septic tank in order to transform it into a sewage treatment plant that may legally discharge straight to the ditch. It is necessary to obtain an EN 12566 Certificate in order to be in accordance with Environmental Agency regulations
  2. ‘IN-TANK’ conversion kits, which are sold to be installed in an existing septic tank in order to ‘convert’ it to a sewage treatment plant
  3. And These do not have the requisite EN 12566 Certificate required to qualify for an Exemption, and thus require a Permit from the Environmental Agency (E.A.) before they may be installed. Tank retrofit kits may only be used if the operator has first applied for and been given an environmental permit
  4. Otherwise, the kits will not work.

The EN 12566 test is conducted at an independent EN Test Center over the course of 38 weeks. It checks on how well the plant is doing in different situations, such as regular operation, underloading, overloading, and so on. This test costs around £30,000 per plant, and it is not possible to test ‘in-tank’ systems since they are not consistent, i.e. septic tanks are of varying sizes, forms, and other characteristics, and hence there is no EN Test for them because it would be futile to do so. A septic tank may only be certified as an EN12566 system if it is completely excavated, converted within the tank, and then sent to an EN Test Center for certification as a whole system.

In-tank conversion kits are available for roughly the same price as add-on plants, but they require a permit from the Environmental Protection Agency (E.P.A.) before they can be installed.

As a result of their testing with septic tank effluent as well as raw sewage, there are three add-on plants that have been granted the EN 12566 Certificate by the European Union. They are as follows: Add-On Septic Tank Conversions Have a Lot of Advantages

  • A direct discharge from a septic tank to a ditch is possible after further treatment in the conversion unit. A new drainfield installation can be avoided, saving thousands of pounds in the long run. This system allows for complete sewage treatment, even if you have a tiny garden. Septic tank to ditch discharges are made legal under this legislation. There are no limitations on what may be flushed down the toilet. Tampons, panty liners, make-up remover pads, cotton buds, nappy liners, and other items that create difficulties in many sewage treatment systems are intercepted by the septic tank and disposed of properly. As a result, the septic tank conversion system is extremely beneficial for vacation rentals and rental homes. Extremely low system operating expenses – either non-electric (FilterPod), Vortex 40 Watts/hr or 57 Watts/hr (BIOKUBE), which is equivalent to very small lightbulbs
  • Extremely cheap system maintenance costs. Maintenance expenditures are low. Only one service every year, as well as the emptying of the septic tank
  • A small physical footprint
  • Converts septic tank wastewater into final effluent of exceptionally high quality
  • Invert levels of varying magnitudes are accommodated

The Septic Tank Conversion Unit is subject to certain restrictions.

  • You must make certain that the current septic tank is entirely waterproof before proceeding forward. It’s common for older tanks, as well as brick or concrete tanks, to be porous, fractured, or to have leaky seals. There must be no rainfall entering the dirty drains.

Septic Tank Conversion

However, if your home already has a septic tank, you may not be required to build a full sewage treatment unit. However, BEWARE! It is possible to classify septic tank conversion units into two types:

  1. Units that are placed after an existing two-chamber septic tank to convert it into a sewage treatment plant that may legally discharge straight into a ditch are referred to as ‘ADD-ON’ conversion units. Environmental Agency regulations require that these have an EN 12566-6 Certificate
  2. ‘IN-TANK’ conversions, which are sold to be installed in an existing septic tank in order to “transform” the tank into a sewage treatment plant. Before they can be installed, they must first get an Environmental Agency Permit, which they do not have because they do not have the EN 12566 Certificate.

The EN 12566 test is conducted at an independent EN Test Center over the course of 38 weeks. It checks on how well the plant is doing in different situations, such as regular operation, underloading, overloading, and so on. This test costs around £30,000 per plant, and it cannot be performed on ‘in-tank’ systems since they are not consistent, i.e. septic tanks are of varying sizes and forms, and thus cannot be tested. The ‘in-tank’ conversion kits that are available are less expensive than the ‘add-on’ plants, but what good are they if the Environment Agency and Building Regulations do not recognize them as a sewage treatment system unless they are accompanied by a permit?

The septic tank is converted into the primary settlement tank, and a tiny conversion unit is used to fill in the gaps between the primary settlement tank and the biozone and final settlement zone.

These units are available with a gravity discharge option or with a pumped outlet discharge option if you need to discharge uphill from your unit.

First, they capture all slowly degradable goods such as tampons, baby wipes, and other similar items that might cause difficulties in some sewage treatment systems.

Add-on septic tank conversion units

Please click on the following link: -This page was last updated on October 29, 2019.

Converting a Septic Tank instead of Replacing One

It is typically more cost-effective to convert a septic tank than to replace it. Septic tank professionals will often propose that a Mantair septic tank conversion be performed in order to solve different types of septic tank difficulties or in situations where sewage treatment is necessary. Septic tank conversions are used to upgrade and modernize existing septic tanks, resulting in fully functional sewage treatment systems that do not necessitate the installation of additional subterranean tanks.

  1. What is the advantage of converting rather than replacing?
  2. Because the system is built within the existing tank structure, there is no need for any substantial excavation work or heavy gear to be performed.
  3. Aside from the cost advantages, converting a septic tank as opposed to totally replacing the tank avoids the disruption and potential harm to existing gardens that comes with completely replacing the tank.
  4. Is it legal to convert a septic tank in the United Kingdom?
  5. There are a number of dishonest businesses operating in the United Kingdom who assert that ‘in tank’ conversion units for septic tanks are illegal and that these devices do not have the needed EN Certification.
  6. There is currently no European Standard for “in tank” conversion units, and as a result, there is no CE Marking available for purchase.
  7. We or one of our licensed installers submits and receives the Environmental Permit on the applicant’s behalf in connection with every septic tank conversion installation with which we are connected.

The Environment Agency (EA), formerly the National Rivers Authority (NRA), has recognized the Mantair septic tank conversion unit as a sewage treatment system for more than 30 years and has authorized its use under Permit Certification, allowing the treated effluent from the system to be discharged directly into natural watercourses legally.

Despite the fact that every Mantair septic tank conversion follows the same operating concept, each device is ‘custom-built’ to fit the size of the existing tank.

While septic tanks employ an aeration process known as ‘anaerobic digestion,’ sewage treatment systems, such as the Mantair septic tank conversion, use an aeration procedure termed ‘activated sludge.’ In order for the ‘anaerobic’ process to take place, the ‘aerobic’ process must first be completed.

An inspection of the current septic tank and its structural state is required with each application in order to determine the size of the tank and its structural condition is required with each application Our septic tank conversion systems are professionally installed for consumers through our network of skilled Licensed Contractors or our in-house Contracts Division, depending on the needs of the customer.

It is not essential for the client to arrange for the tank to be emptied prior to the arrival of a professional engineer; nonetheless, it is required that they do so in order to facilitate the inspection.

Septic tank conversions come in a variety of shapes and sizes.

This was some years ago.

It is critical in any properly designed sewage treatment system that not only the proper environment is provided for the growth and maintenance of aerobic bacteria, but that there is also a settlement zone to allow the treated effluent to separate from fine solids and any floating oils/fats/other contaminants.

  1. Aeration zone: The majority of the tank is converted into an aeration zone, where aerobic bacteria are developed by introducing oxygen into the effluent.
  2. Within this zone, the treated effluent separates via the use of gravity and is subsequently discharged by the use of a ‘airlift,’ which regulates the flow of the effluent through the system.
  3. Despite the fact that these products are sometimes referred to as “septic tank conversions,” they do not ‘convert’ the current tank but rather offer treatment after the tank has been installed.
  4. As an alternative to installing a Mantair septic tank conversion, this solution can be more cost-effective than installing a whole replacement packaged sewage treatment plant because it requires less maintenance.
  5. In order to establish the cost of building a septic tank conversion, it is important to complete a septic tank study on your property.
  6. Over the course of over 30 years, we have established ourselves as one of the UK’s leading independent septic tank and sewage treatment plant specialists, with extensive knowledge of all septic tank difficulties.

Cookies are used on this website to enhance your browsing experience. We’ll presume you’re okay with this, but you have the option to opt out if you so choose. Accepting cookie settingsACCEPTING cookie settings

Privacy Overview

Cookies are used on this website to enhance your navigational experience as you travel across the website. The cookies that are designated as necessary are those that are saved on your browser because they are required for the proper operation of the website’s fundamental features, which are described above. We also make use of third-party cookies to better understand and analyze how you interact with this website. These cookies will only be saved in your browser if you provide your permission for them to do so.

  • However, disabling certain of these cookies may have a negative impact on your browsing experience as a result of your decision.
  • This category only includes cookies that are necessary for the website’s core functionality and security features to work properly.
  • In this context, non-required cookies refer to cookies that are not strictly essential for the website to function and are used only for the purpose of collecting personal information from users through analytics, advertisements, and other embedded content.
  • Update on the status of Covid 19 Following a time of decreased services as a result of the outbreak of Covid-19, we worked promptly to implement new rules and processes to protect our patients.
  • More information may be found here.
See also:  How Can I Find Out The Size Of My Septic Tank? (Solved)

Uni:Gem★ septic conversion units meet the standard for 2020GBR

In order to limit the degree of pollution from sewage in the nation’s watercourses, the 2020 General binding regulations (GBRs) were implemented on 1 January 2015 and came into effect on 1 January 2016. It is required by the General Building Regulations (GBR) that any septic tank that drains directly into surface water be updated, rebuilt, or repaired by 1st January 2020. (alternatively you must have plans in place to carry out this work within a reasonable timescale, typically 12 months).

Septic conversion units – the facts

  • To the contrary of previous claims, septic tank conversion units ARE compatible with GBRs, provided that they comply with the appropriate British Standard, which is now BS EN 12566. Clearly stated in the GBRs, septic conversion units are a viable alternative choice if the following conditions are met: It is necessary for your treatment system to comply with the applicable British Standard in effect at the time of installation.” The following standards are now in effect for new systems: – BS EN 12566 for small sewage treatment plants
  • And – BS EN 12566 for large sewage treatment plants. Under the general binding requirements, you can only use a septic tank conversion unit provided it complies with the following specifications.” Source:
  • When it comes to upgrading your septic tank, one of the most cost-effective options is to install a septic conversion unit that has been built and authorized to the BS EN 12566 standard. It is possible to install and connect to an existing septic tank using a septic conversion unit, which is considered a tertiary treatment plant. In the septic conversion unit, wastewater is treated to a level of purity that allows it to be released to surface water. A permission is required for septic tank converters that are installed within a septic tank since they do not comply with GBRs and must be evaluated to see if a permit is required. For total piece of mind, British Water can provide you with unbiased guidance as well as a list of possible sewage treatment solutions, including:

So, what are your options?

1 Connect to the main sewer line. In distant areas, this may not be practicable, however pump chambers can be utilized to transfer effluent to the main sewage system instead. 2 Make a drainage field for the area (Designed in accordance with BS6297) This enables the septic tank to release wastewater into the earth rather than into surface water, reducing pollution. There are several instances where the building of a drainage field is not feasible owing to site restrictions such as a lack of available area and/or the soil lacking the necessary drainage capacity (ie, rock, clay, high water table).

A Marsh Uni:Gem STAR septic tank may be linked to an existing septic tank once it has been installed.

4 Install a Marsh sewage treatment system in lieu of your existing septic tank.

In addition to eliminating the requirement for an on-site drainage field or septic conversion unit, an on-site sewage treatment plant guarantees that the wastewater has been thoroughly treated before it is released into the environment.

Marsh Uni:Gem★ septic conversion unit

At the time of writing, the Marsh Uni:Gem septic conversion unit is the only system available on the market to UK merchants that has been completely tested and accredited to the British Standard EN 12566 standard. The effluent discharge from these units exceeds the minimal criteria of BS EN 12566 (British Standard for Environmental Protection). Certification:

Marsh package sewage treatment plants

These package sewage treatment plants, such as the Marsh Ensign and Marsh UP-L, are also fully accredited to the BS EN 12566 standard, and they eliminate the need for an additional septic conversion unit or drainage field, ensuring that wastewater is completely treated before being discharged to the environment. We invite you to contact the Marsh technical team via email at [email protected] or by phone at 01933 654582 for more information about septic conversion units and to discuss your alternatives.

How to convert a septic tank?

When it comes to private sewage treatment for a property, you have two major options: a septic tank or a sewage treatment plant. Septic tanks are the most common kind of private sewage treatment. Even though septic tanks are common, a sewage treatment plant is the most effective sewage treatment method available for clearing wastewater to the point where it may be discharged into waterways. In other words, if your septic tank is experiencing issues or if you just want to improve the efficiency of your present system, you should consider having it converted.

Septic tank conversion options

There are two basic methods for converting a septic tank into a sewage treatment plant: mechanical conversion and chemical conversion. The difference between the two ways is the location of the extra conversion equipment.

  • Conversion via “additional equipment”: This includes installing additional apparatus after the existing septic tank, converting the tank into a main treatment chamber for a sewage treatment plant once it has been installed. It is possible to comply with Environmental Agency requirements using this method of conversion since the equipment may be tested to EN 12566 standards and be awarded a CE mark if it passes the test. In-tank conversion: This involves installing additional filtering equipment into your current septic tank in order to increase filtration. This is due to the fact that these conversions are not consistent and therefore cannot be evaluated in accordance with the EN 12566 European Standards for small sewage treatment facilities. This implies that they will not be recognized by the Environment Agency for the purpose of discharging water into water courses.

Why convert a septic tank into a sewage treatment plant?

Septic tank conversion to sewage treatment plant is an excellent approach to improve the performance and efficacy of wastewater cleaning in your home or business. In its most basic form, a sewage treatment plant is similar to a septic tank with two extra treatment chambers that allow the wastewater to be filtered and treated to a higher degree than it would otherwise be. If you have an old or malfunctioning septic tank, improving your system with the installation of additional treatment gear will enhance its effectiveness and help to avoid groundwater pollution from contaminating your water supply.

Septic tank conversion costs

The cost of converting an existing septic tank is typically cheaper than the cost of constructing a new sewage treatment plant from scratch. Given that your existing septic tank is in good working order, the conversion will provide you with many years of enhanced wastewater treatment. The condition of your tank, appropriateness of your site, and performance of your new system upgrade will all be determined by a sewage treatment specialist who will provide you with expert advice. The following are additional benefits of a septic tank conversion:

  • In the case of an existing system, it is a cost-effective update. Groundworks are minimized, and the quantity of new equipment that has to be installed is reduced as a result. In comparison to constructing a totally new treatment plant, installation is quicker and less complicated. Because of the large time intervals between tank emptying, it is a low-maintenance choice. Clear, odorless effluent that may be discharged into watercourses is produced

Wildon UK is a leading provider of wastewater treatment and drainage solutions in the United Kingdom. The fact that our team of specialists is knowledgeable and well qualified means that we can provide a wide range of services, from installation to maintenance and repair work, on a wide range of systems.

Do not hesitate to contact our friendly team if you have any questions – we serve clients in Stoke-on-Trent as well as customers all across the United Kingdom. Return to the previous page

Farm Slurry Systems

Animal waste management systems are essential for helping your business develop and prosper because they allow you to take use of readily accessible resources. Farm slurry systems are the most efficient means of accomplishing this goal, and they can be installed quickly and easily. « Continue reading this post »

Septic Tank Conversion

It is possible to convert an existing two-chamber septic tank into a wastewater treatment plant with the help of the FilterPod. They are unable to be utilized to convert a ‘onion’ or spherical septictank due to the low effluent quality produced by these systems. Depending on whether or not you already have a standard septic tank that is large enough and waterproof, you may not need to construct a full sewage treatment plant. The ‘cowboy Traders’ may be able to help you convert it, but be on the lookout for them.

Septic tank conversion units can be classed as two types:

  1. The term “ADD-ON” refers to conversion units that are put after an existing septic tank in order to turn it into a sewage treatment plant that may legally discharge straight into a drainage ditch. In order to comply with Environmental Agency regulations, they must obtain an EN 12566-6 Certificate. The FilterPod is the only add-on system in the United Kingdom to be awarded this Certificate
  2. The only other systems are ‘IN-TANK’ conversions, which are sold to be installed in an existing septic tank in order to ‘convert’ it to a sewage treatment plant (see below). These DO NOT have the necessary EN 12566 Certificate and are thus not recognised by the Environment Agency for an Exemption from the requirement. If you fall into one of these categories, you will not be eligible for an Exemption from the Environment Agency. A septic tank was never intended to include chambers that were the proper size and form for use as a sewage treatment plant. This was never the case. The sale of such items will be prohibited starting on the first of July, 2013, if the EN 12566 Certificate is not present.

It takes 38 weeks at an independent EN Test Center to put a plant through its paces. It checks on how well the plant is doing in different situations, such as regular operation, underloading, overloading, and so on. This test costs around £30,000 per plant, and it cannot be performed on ‘in-tank’ systems since they are not consistent, i.e. septic tanks are of varying sizes and forms, and thus cannot be tested. The in-tank conversion kits that are available are less expensive than the “add-on” plants; but, they are of little value if the Environment Agency and Building Regulations do not recognize them as a legitimate sewage treatment system.

The septic tank is converted into the primary settlement tank, and the FilterPod is installed where it was previously absent.

Placement of septic tanks in front of any sewage treatment unit has several advantages.

See also:  How Much To Empty My Septic Tank?

Septic Tank Conversion Systems

Septic tank conversion devices are frequently used to solve septic tank difficulties. They are quite inexpensive. Septic tank conversion units are used to modify and modernize existing septic tanks and cesspools so that they may act as fully functional wastewater treatment systems. In most cases, these systems are employed in situations where an existing septic tank is generating issues and where the wastewater needs to be thoroughly cleaned before it can be discharged to a ditch or stream. Consumers Take Note!

  1. In the United Kingdom, there are a variety of’so-called’ septic tank conversion devices available.
  2. Despite the fact that they are promoted as “septic tank conversion units” by manufacturers, they do not truly “convert” the existing tank, but rather treat the overflow from the septic tank instead.
  3. Mantair Septic Tank Conversion Units are a type of septic tank conversion unit.
  4. Since its founding in 1968, Mantair has been at the forefront of septic tank and cesspool renovations, and the company continues to be the industry leader in this sector.
  5. In addition to National Trust Nature Reserves, SSSI and RAMSAR sites, the Mantair septic conversion device has been deployed in a variety of other settings as well.
  6. An on-site inspection by a Mantair engineer is required prior to the installation of a Mantair unit to verify whether or not the current septic tank is acceptable for conversion.
  7. The Mantair septic tank conversion unit is based on the well-established idea of aerobic purification, which has been around for a long time.

The bulk of the tank is aerated, which provides the ideal condition for the development of aerobic bacteria in the tank.

The treated effluent that remains in the settlement zone is released from the system by the Final Effluent Airlift, which is the liquid that remains in the settlement zone.

Aspects of all Mantair units are intended to guarantee that the finished installation meets all applicable Environmental Agency and Building Regulation criteria.

Septic Tank Conversion Units Made at Home Since the beginning of 2012, a large number of DIY septic tank conversion devices have hit the market, mostly through internet advertising.

This is not true.

Self-contained septic tank conversion systems are powered by an air compressor, which pushes air into a diffuser that is positioned within the tank during operation.

Mixed liquor is the term used to describe this sort of effluent, which is used to describe the initial stage of an aeration sewage treatment plant’s treatment process.

Only after this stage of settling has taken place can the effluent be considered appropriate for release to a natural river or other body of water.

Units for converting septic tanks that are attached to a building Although these sorts of systems do not turn existing septic tanks into sewage treatment plants, the effluent quality that is released is greatly improved as a result of their installation.

Following clearance by the Environment Agency, the final effluent generated is appropriate for release into a waterway.

Certification from the Environmental Protection Agency The Environment Agency implemented a new permission procedure for modest discharges (with a maximum flow rate of 2M3/day to the ground and 5M3/day to a watercourse) in April 2010.

Because it is a streamlined procedure, no application fee is charged by the Environment Agency for this type of application.

They do not qualify for exemption certificates since the vast majority of discharges in rural regions go to seasonal dry ditches, which do not qualify for exemption certificates.

This is a more in-depth application procedure, and the Environment Agency charges a cost of £ 125 for this service.

If the prerequisites are not satisfied, however, it is still essential to submit an application for a Permit.

In order to obtain more thorough information on the Environment Agency Certification and Regulations, please contact us by phone or email at: 0800 121 678 or +44 (0) 255 476 467.

Converting A Cesspool To A Septic Tank System In Kona

A Cesspool to Septic Tank System Conversion in Kona is a common practice. A Cesspool to a Septic Tank System Conversion Project in Kona

Converting A Cesspool To A Septic Tank System In Kona

Before you can build an addition to your Kona house, you may need to install a septic tank system. One of our clients is required to do so. Janett (our wonderful customer) wishes to boost the value of her Kona rental property by building an ohana underneath it (the foundation has a post and pier foundation, so there is plenty of space for it). More individuals will be able to call it home as a result of this. An ohana is an extension to a house that is primarily intended for extended family members to stay.

  • She must first convert her cesspool to a septic tank system before moving on.
  • Its purpose is to assist in the cleaning up of our Hawaiian seas.
  • When our clients call us, they don’t always know what they want.
  • She calls us, and we begin working together to ensure that her house is in compliance with Act 125.
  • You can find out more about our septic tank installation services on our website.
  • The septic tank on her property is a Chem-tainer unit with a capacity of 1,250 gallons.
  • For those interested in the financial details, Janett spent around $10,250 on this project, which is about the typical starting price for a septic tank system.

1. Getting Any Necessary Permits

Getting all of our ducks in a row in Hawaii meant first obtaining all of the necessary permissions for the installation of a septic tank system, which took time. In this case, it may be necessary to include a:

  • Permits for septic tanks, water rights, and access rights of way are all required.

As well as others. Because these permissions are costly, we make certain that Janett is aware of the situation before proceeding. We put together all of Janett’s permissions and then start to work. The fact that we have so little room to move is our most significant challenge. This makes our task far more complex since we must utilize much larger equipment to replace a cesspool with a septic tank as a result of the situation. We were able to complete the task of emptying the cesspool and preparing the space for the installation.

3. Installing The Septic Tank

We utilize our tools and equipment to dig a hole that will be the proper size for Janett’s selected septic tank installation.

She decided on a Chem-tainer container with a capacity of 1,250 gallons. Her new storage container is constructed of exceptionally sturdy plastic and is the right size for her home. The tank is then lowered into the earth, and we proceed to the next phase.

4. Constructing The Drainage Field

This is the location where the majority of the wastewater is treated to make it fully clean. We prepare the space by digging it out and laying down some gravel. The dirt, boulders, and gravel all contribute to the purification of the wastewater. We then connect the tank to the rest of the system by installing the pipes that will carry the water:Of course, it won’t do any good if we don’t connect the tank to anything.

5. Hooking Up The Septic Tank

The home is connected to the tank, which in turn is connected to the drainage field: When we describe it like that, it may appear simple, but installing the pipes requires careful preparation and attention to detail. We make certain that the pipes are secure in order to reduce the likelihood of a leak. We now have the opportunity to conceal our efforts.

6. Covering The Septic Tank And Drainage Field

We will not work in the open without a protective barrier in place. Although it doesn’t seem to be very successful as a water cleaning, this will make it much less effective. The first two layers we utilize are made up of various types of rock and gravel, as follows: Now we’re putting down a layer of soil as a top layer: This is fantastic news since it implies that Janett will be able to grow grass and other plants on it! The last section is now available.

7. Disguising The Septic Tank System

The final section might also be the most enjoyable. A lot of folks do not want to have merely soil in their backyard. Janett, on the other hand, does not. Janett has the ability to essentially start again and plant whatever she wants. It’s possible that the grass is a little greener where the drainage field is due to the nitrogen and other nutrients that are released by the drainage field. Janett’s rental property is now in compliance with Act 125! She has finally been given the go-ahead to begin construction on her ohana.

I think it’s been about a year since Janett called us to come out and replace her cesspool with an underground septic tank system.

It’s a thrilling experience for everyone involved.

When Will You Install Your Septic Tank System?

You might go ahead and do the task. When you do this, you will not have to worry about doing it when all of your neighbors are doing it as well! If you have any questions or comments regarding the procedure, please share them with us in the comments section below! For further information, please see our guide to septic tank systems in Hawaii.

  1. You might move ahead and do the task at your disposal. When you do this, you won’t have to worry about doing it when everyone else in your neighborhood is doing it! Any queries or concerns concerning the procedure can be posted in the comments section below. Thank you. For further information, please see our guide to septic tank systems in Hawaii.

Septic to Sewer Conversion in Hallandale Beach

Septic tanks and sewer lines are the two most common methods of disposing of wastewater on residential properties. In contrast to the majority of people who just accept the septic system that came with their home, local authorities have improved and extended public sewer connections, making the conversion procedure much simpler. Converting to a sewage system may significantly reduce the amount of money spent on maintenance and make plumbing much easier to maintain.

Your property’s market worth may even increase as a result of the conversion. Make contact with our skilled staff at Watermen Plumbing Inc. in Hallandale Beach if you require professional septic to sewer conversion services. To schedule an estimate, please call (954) 800-6364.

The Difference between Septic TanksSewer Systems

To evaluate which option is most appropriate for your property, it is critical to grasp the fundamental distinctions between these two methods for disposing of waste water. A septic system collects wastewater and filters it through three stages before dumping it into a big holding tank for storage. A drainage field is used to collect the layers of scum and sludge, while the clear water layer, which contains chemicals, is drained off. The upkeep of a septic tank is often the responsibility of the individual homeowners who own the property.

Water from sewage and backwater drains into this communal system, where it is treated with chemicals to ensure that germs and bacteria are killed.

Advantages of Septic to a Sewer Conversion

There are several benefits to having a sewer line built rather than having to deal with a septic tank, which are listed below. Sewer line connections have become more frequent than ever before as metropolitan areas have grown in size. Some of the most significant advantages of sewage line conversions are as follows:

  • Blockage of sewer lines is less common than with clogging of septic tanks. Sewer pipes are often more resilient than septic systems in terms of misuse. Septic tanks must be flushed on a regular basis (every 3 to 5 years), and they must be cleaned out completely. In addition to bad smells, wastewater floods and spilled sewage are more likely to occur in septic tanks.

Trust Our Professional Handiwork

When it comes to building a sewage line, it is vitally critical that you use specialists that have extensive knowledge in the field. Setting up a sewage line is complicated, and if you try to do it yourself, things may go horribly wrong very quickly. Our hardworking specialists conduct exceptional septic to sewer conversions in Hallandale Beach, and we are so confident in the quality of their work that we extend a one-year warranty on their labor. Call us immediately at (954) 800-6364 or send us an email so that our experts at Watermen Plumbing Inc.

Leave a Comment

Your email address will not be published. Required fields are marked *