What Is A Septic Tank Cleanout? (Best solution)

Septic tank cleanouts are conducted to ensure the ongoing working of the system is maintained. If the tank is not cleaned out on a regular basis then a layer of sludge will settle on the bottom of the tank and decompose and eventually cause failure.

istockphoto.com

What is a septic tank cleanout? A sewer cleanout is conducted to ensure the ongoing working of the septic tank is maintained. If the tank is not cleaned out frequently then a sludge layer will settle on the bottom of the sewage tank and decompose and eventually cause failure.

What is septic cleanout?

The septic systems cleanout is the short PVC pipe with removable cap that sticks out of the ground between your house and the septic tank. If the cleanout does contain backup, it could be from the septic system or it could be a blockage between the cleanout and the tank.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.

Standing Water Over Your Septic Tank.
Bad Smells Coming From Your Yard.
You Hear Gurgling Water.

You Have A Sewage Backup.
How often should you empty your septic tank?

How often do I need to clean out septic tank?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

Should there be water in my septic cleanout?

If the water is standing in the pipe or overflows out the cleanout, then you know that the problem is from that point out. At this point you can either call your favorite septic company, or dig up the tank lids yourself and check the water level and solids content in the tank.

What is the purpose of a cleanout?

A drain cleanout provides access to your main sewer line and is located outside of your home in the front or back yard. Cleanouts typically go unnoticed until there is a problem. They look like capped pipes sticking a few inches above the ground.

How do you know if your septic system is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

1) Get on a Schedule.

2) Take Care of the System.
3) Know the Parts of Your System.
4) Check Other Possible Issues.

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

How long can a septic tank go without being pumped?

You can wait up to 10 years to drain your tank provided that you live alone and do not use the septic system often. You may feel like you can pump your septic tank waste less frequently to save money, but it’ll be difficult for you to know if the tank is working properly.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

Regularly inspect and maintain your septic system.
Pump your septic tank as needed.

Keep your septic tank lids closed and secured.
Be water-wise.
Direct water from land and roof drains away from the drainfield.

Landscape with love.
Keep septic tank lids easily accessible.

Should sewer cleanout be capped?

Make sure your clean out cap is on. Almost all buildings do. It allows access to the sewer line in case there’s a problem. It’s usually located somewhere between your residence and the street. The cleanout cap is simply the part that keeps it covered.

How do you clean a cleanout drain?

Steps For How to Clear A Main Sewer Line Clog

Loosen the Drain Pipe Cap (Cleanout Pipe) The first step is to find your main drain cleanout location.
Remove Cap, Allow Build-Up to Drain. Once you remove the cleanout cap, step away quickly.

Insert the Snake into Pipe.
Run the Tool Until Clog Is Gone.
Clean Up.

Where are Cleanouts required?

A cleanout is only required on the building drain as it is defined in Chapter 2: Building Drain – “That part of lowest piping of a drainage system which receives the discharge from soil, waste and other drainage pipes inside the walls of the building and conveys it to the building sewer beginning two feet outside the

Septic Tank Clean-Out 101

Septic tanks of various shapes and sizes are pumped out by John Kline Septic Services. From residential to commercial to municipal work, there is something for everyone. Maintaining your septic tank is essential, whether you’re in need of a clean-out or you simply want to understand more about the procedure. To learn more, continue reading or contact us now to arrange service. We provide same-day service for emergencies, and our technicians are available 24 hours a day, seven days a week. Always In order to ensure that your septic tank gets cleaned out through the largest available opening, Your septic tank or system may have more than one entry point, depending on the type of tank or system you have installed.

This is normally covered with a cement lid or manhole cover that is 18-24 inches in diameter and is often raised to grade with an extension.

It also makes it difficult to completely clean out the tank, therefore it’s critical to ensure that your tank is well cleaned from the primary entry.

In spite of the fact that we recommend that you have your tank pumped out every two to three years, depending on the size of your tank and the number of people living in your home, you may be able to extend the period between clean-outs without suffering any difficulties.

When it comes to septic tank cleaning, we recommend that you never go more than FIVE years between cleanings to ensure everything is operating correctly and that your tank is filtering out waste in the appropriate manner.

Ensure that your septic tank is easily accessible before scheduling your septic clean-out.
Make a notation on your manhole cover or access port if it is hidden by your landscaping so that your technician can easily locate the cleanout when he or she arrives on site.
Simply inquire or contact us in advance to inquire about the possibility of installing a riser at the time of your septic pumping.

Are you prepared to get your septic tank cleaned? We provide business and residential septic pumping services in Lancaster, Pennsylvania and the adjacent areas, including York, Lebanon, Berks, Chester, and Dauphin counties, as well as the surrounding areas. Make a call right now at 717-898-2333.

Do You Know about Your Sewer Cleanout – Why it’s Important and How to Locate It?

Sewer cleanouts aren’t something that comes up in regular discussion, but when something goes wrong, they’re a hot topic, aren’t they? In reality, the majority of homeowners aren’t even aware of the existence of their cleanouts, let alone what they perform. Because backed-up waste water in a house is such a horrible thing to think about, let alone experience, we thought we’d walk homeowners through the process of finding and using a sewer cleanout – including why it’s vital and where to look.

What is a Sewer Cleanout and how does it work?
They are brought together by a major pipe system known as a stack.

Things do happen, though, such as jams of a dozen various varieties preventing a pipe from enabling waste water to pass through it, for example.
What is the significance of these individuals?
In the event that waste water seeps into the flooring and baseboards before being cleaned up, the water will remain there unless it is cleaned quickly by specialists.

Furthermore, if the health agency becomes aware of the situation, the homeowner will be punished and ordered to clean up the mess.
The presence of a sewage cleanout that does not have a proper cap on it means that those gases might be released into the air around or within the house.

Not all plumbing is up to code, or in other cases is only up to code to the point of passing inspection.

This might result in the cleanout being located in a variety of locations, including on the drain stack in the basement.

Stacks are equipped with a roof exit, where a cleanout might be installed.

In most cases, the pipes will be either cast iron or PVC (plastic) piping, with a cap on top that will be either plastic, brass, or cast iron in construction.

Absolutely.

Second, locate the sewer cleanout that is located outside the home.

If homeowners are able to remove the cap, they will be able to go into the line with a snake and unclog it.

They will be able to open the cap since they will have the appropriate wrenches.

Every day, hundreds of individuals are faced with the task of unclogging their sewer cleanout, but many have no idea where to begin.

On rare occasions, though, you’ll need to know where the sewer cleanout is in order to avoid flooding.

We hope that this explanation has been helpful. Bay Area Plumbing is ready for all of your plumbing requirements 24 hours a day, seven days a week. If you require assistance with a blockage, please do not hesitate to contact us for further information and assistance.

COMMON PROBLEMS — JT’s SEPTIC

You should examine the sewer cleanout on the exterior of the home if you are hearing gurgling and all of the house fixtures are clogged. This is often a black 3-4 in color “inch ABS pipe with a threaded cap is available. Remove the cap (WARNING: BE CAREFUL! (WARNING: IT MAY CONTAIN SOME PRESSURE!) : Assuming the sewage line is completely dry, you will have a clog inside the home plumbing, directly in front of the cleanout valve. Make a phone call to a plumber and have them rooter the line. Sewer line cameras are available from several rooter/plumbing businesses.

You have two options at this point: call your preferred septic provider or pull up the tank lids yourself and check the water level and solids content in the tank yourself.
Most tanks erected after January 2001 include a filter that has to be cleaned at least once a year (we clean filters—please call us).

We’ll even notify you once a year when it’s time to clean your filters!).
It’s likely that you have a blockage in your sewage system.

GURGLES

Whenever you flush the toilet, the water gurgles, the toilet takes an unusually long time to flush, or the water in the shower turns brownish after you have done the laundry, you are receiving a subtle indication that trouble is brewing. In order to determine when the tank was last pumped, look through your records and then contact your preferred septic provider for assistance.

ODORS

If you are experiencing unpleasant odors within your home, such as rotten eggs, it is likely that a trap or vent inside your home is not venting correctly. Call your plumber right away since these gases are harmful to both people and animals!

ODORS OUTSIDE IN THE YARD

At times, the smells emanating from the roof vents will seep into the yard due to meteorological conditions. Make use of a plumber to elevate the roof vents and/or to place a charcoal filter in the vents, as needed. It’s important to remember that your septic tank is vented via the roof.

SURFACING IN THE YARD

The smells from the roof vents can sometimes be carried down into the yard by the wind. Engage the services of a plumber to elevate the roof vents and/or install a charcoal filter in the roof vents. Keep in mind that your septic tank’s exhaust is vented through the ceiling.

HEAVY SOLIDS- OVERDUE FOR PUMPING

Contrary to common perception, you DO need to have your septic tank pumped on a regular basis. Pumping maintenance should be performed on a regular basis, otherwise your system will get overwhelmed with solid waste and eventually cause damage to your leach lines.

DON’T MAKE THIS HAPPEN TO YOU! This is an extreme example of a tank that is overflowing. There is sewage flowing from the tank access holes and into the yard!

grease build up in sewer pipes

Fats and grease should never be flushed down the toilet or sink. They have the potential to harden the lines and cause failure; they have the potential to generate an excessive buildup of the floating scum layer in the septic tank; and they have the potential to go into the disposal regions and adjacent soils and completely block the system off. A shattered lid can pose a serious threat to both animals and children. It is conceivable that they will fall through the cracked or broken lids and will not be noticed until it is too late to save themselves.

crushed or settled pipe

This is the second most prevalent problem we notice in septic systems that are less than 10 years old. In addition to blocking flow, loose fill soil surrounding the tank is causing a backup into the house since it is pulling the pipe with it as it settles. We have even observed instances when contractors installing new systems do not correctly pack the fill earth below the pipe, resulting in pipe settlement on systems that have not been utilized or have only been used for a short length of time (see below for an example).

SEWER OUTLET PROGRESSION

When it comes to modern septic systems, this is the most typical issue we encounter. Take note of the fact that the unsupported outlet pipe is being driven down by settling dirt. Watch as the water level in the tank rises, forcing the flow of water in the inflow sewage line to slow. This will eventually result in a clog in the inflow sewer line at some point. The solids flowing down from the house will not be able to enter the tank correctly because of the high water level.

examples of settled sewer pipes:

INSTALLATION OF A TANK AND/OR REPAIR OF SEWER PIPESTHE “POLY” PIPEIMAGES BELOW PROVIDE AN EXAMPLE OF WHAT PIPENOTTO USES WHEN INSTALLING A TANK AND/OR REPAIR OF SEWER PIPES However, despite the fact that this grade of sewer pipe is less expensive at the time of purchase, it might end up costing you a lot of money in the long run!

settled inlet sewer pipe on unused system:

INSTALLATION OF A TANK AND/OR REPAIR OF SEWER PIPESTHE “POLY” PIPEIMAGES BELOW PROVIDE AN EXAMPLE OF WHAT PIPENOTTO USES WHEN INSTALLING AND/OR REPAIR OF SEWER PIPES. However, despite the fact that this grade of sewer pipe is less expensive at the time of purchase, it might end up costing you a lot more money in the long run.

Roots growing in and around the septic tank:

In addition to disrupting the system by clogging or destroying drainage and distribution lines, tree roots can also enter the tank, causing it to leak. Foul odors, poor drainage, and patches of vegetation in the leach field are just a few of the signs that you may have a root problem.

ERODED BAFFLES

If the baffles are broken, missing, or have never been placed, the drainfield’s life expectancy will be reduced significantly. Baffle repair normally entails the placement of a plastic tee at the end of the sewer pipes to prevent them from clogging.

orangeburg sewer pipes

Solids are kept in the septic tank and away from the disposal area with the use of concrete baffles. Using baffles to reduce agitation of wastewater entering the septic tank and prevent sediments from escaping the tank and entering the drainfield, baffles can assist avoid drainfield damage. Drainfield life will be reduced if the baffles are broken or missing, or if they are not fitted at all. The insertion of a plastic tee at the end of the sewage pipes is a common part of baffle repair.

How To Install a Septic Tank Sewer Cleanout

PVC tee fitting

Tape measure
PVC 4-inch pipe
PVC pipe cap

PVC pipe cleaner
PVC pipe cement
Pop-off fitting (optional)

Shovel
Hacksaw
PVC tee fitting

A clean-out port in your drain pipes may save you a lot of time and money, as well as avoiding a potentially nasty issue in some situations. In the event of a blockage, a clean-out allows you to quickly and easily access the drain line, and in some cases, it can avoid flooding inside your house. If the clean-out is correctly installed, it may also be utilized for routine septic tank cleaning while pumping out the septic tank.

Step 1

Locate the drain line as it exits the home and follow it. The majority of septic tanks are placed at least 10 feet away from the house. Choose a site for the clean-out that is roughly 5 feet away from the house and put it there. The drain line should be no deeper than 2 feet or no deeper than 2 feet and 1 inch.

Step 2

3 to 6 inches deeper than the drain line should be dug out of the ground. In order to have enough space to work, you will also need to expose 3 to 4 feet of the pipe on either side. Remove any loose dirt from the drain line and make ensure that no water or appliances are running inside the house in order to keep the drain line as dry as possible.

Step 3

Remove a portion of pipe from the drain line by cutting into it. The length of the excised part should be the same as the length of the tee fitting. Make sure to account for the flange on the tee fitting, which will be used to enter the drain line on both ends of the fitting. Make use of the pipe cleaner to clean both ends of the drain line as well as the fitting on the end of the line.

Step 4

Connect the tee fitting to the drain line using the hose clamp. Place the fittings such that the open port is pointing upward when the fittings are closed. Make use of sufficient quantities of pipe cement to guarantee a firm and secure fit. Calculate the distance between the fitting and the ground level. A piece of PVC pipe should be cut to match this measurement and firmly glued into the tee fitting to complete the installation.

Step 5

Place the PVC pipe cap on top of the new pipe and tighten it down. It is recommended that you acquire a threaded cap so that it may be removed easily when service is necessary. A pop-out fitting is another option to consider. If there is a backup of water in the pipe, the weighted cap on this fitting will keep it securely in place. This will cause the insert to pop out and enable the water to drain outdoors instead of backing up into the house. These are not permissible in all jurisdictions, so verify your local codes before putting them in.

Tip

When cutting into the drain line, always sure to use eye and hand protection. There will be sewage leftovers in the line, and you will want to prevent your eyes and skin from being contaminated as much as possible.

Some homeowners may build a clean-out on both sides of the septic tank so that they can have easy access to all drain pipes as well as the tank itself while doing maintenance.

Sewer Clean Out for Residential Homes 101

a wooded trail / Photo courtesy of Fotolia Septic system failures can be prevented by utilizing a variety of fail-safes in contemporary plumbing. Your home is well-protected against sewage backups, with everything from drain traps to sump pumps and vent pipes. The sewage clean out is an extremely vital component of this system, and you should be aware of its existence. Despite its harmless look, having one or more clean outs in your home’s sewage line may have a significant impact on both the health of your sewer line and the health of your wallet.

What is a Sewer Clean Out?

In most cases, the sewer clean out is a capped pipe that is positioned on or near your property line and connects to the lateral sewage line. In plumbing, a lateral sewer line is a pipe that links the sewage lines in your house to either the municipal sewer system or your septic tank. Septic waste can back up into drains when the lateral becomes blocked, causing a nuisance as well as potential health risks for anyone who are exposed to it. Maintaining your sewer pipes and draining water in the event of a backup are two important benefits of having a clean out.

How to Find the Sewer Clean Out

The sewer clean out is a tiny, capped conduit that protrudes from the ground surface. Unfortunately, finding it is not always straightforward. The fact that many homes have several clean outs and, in some rare circumstances, the clean out is actually placed within the house just adds to the complexity of the situation. The methods that follow should assist you in finding the clean out more quickly.

The Sidewalk Should Be Checked– In many localities, the location where your lateral joins the municipal sewer line is indicated on the sidewalk. Along the curb and sidewalk, look for a letter ‘S’ that has been stamped or painted. If you come across this marker, you may easily visualize a straight line from the mark to your house, where the lateral may be located if you look closely. In certain situations, you may even be fortunate enough to come upon a clean out in the neighborhood of where you are looking. Search Near Your Foundation– In many circumstances, locating the sewer clean out near the road is impractical, or the home’s former owners elected to have more than one sewer clean out built. In these cases, you should search near your foundation. When you have a septic system in place, sewer clean outs are also typically positioned close to the home’s location. If you are more than three feet from the foundation, you will most likely find the cap anywhere between the road or septic tank and the point at which your home’s sewage line exits the foundation and enters the ground
Look for extra clean outs inside– Some homes, particularly older ones, may have clean outs that are either hidden within the structure or protrude from the exterior walls of the structure. Check the basements, crawl spaces, and attic for probable vent pipe sites along with the vent pipe. Most of the time, indoor sewer clean outs will look to be a junction with one side of the Y or T shaped intersection being capped. These are important for keeping your interior pipelines in good condition, even if they are not essential.

What if the Property Lacks a Sewer Clean Out?

It is possible that older properties may not have a sewer clean out. The latter is particularly true if one is not obligated to do so by municipal or state plumbing regulations. It is typically preferable to have one installed in such situations. Sometimes your home has a clean out that has just been covered up by dirt, which is another situation. If you suspect the house has a clean out but have been unable to identify it, you may want to conduct some light digging along the ground where you assume the clean out should be in order to locate it.

Benefits of a Sewer Clean Out

While having a sewage clean out is mandated by law in certain jurisdictions, if you have an older property or live in a state where they are optional, you may find yourself without one. There are, however, various advantages to having a clean out installed on your home, including the following:

Lower Maintenance Costs

The clean out gives you direct access to the sewage lateral on your property’s property. This means that a plumbing professional may monitor the water flow from each individual faucet in your home to verify that there are no blockages or other pipe concerns during their monthly maintenance visits.

Cheaper and Easier Cleaning

When it comes to cleaning your sewage lines, a plumber would normally have to remove your toilet or perhaps climb onto the roof to do so.

They will have easier access to the sewage lateral if they have a sewer clean out performed. Because of the time and effort savings, you will have a lower overall bill.

Protects Your Landscaping

If you have a big clog, one advantage that only becomes evident in an emergency situation is the fact that a sewer clean out can assist eliminate the need to dig up your yard in the case of a clog. The sewer lateral, in contrast to many of the pipes within your home, is totally underground and cannot be inspected for wear or damage without digging the area where it is located. The sewer clean out serves as an entry point for your lateral, allowing it to be more readily examined and maintained.

BackflowPrevention

It can also be used as an external drain if a large amount of blockage is encountered. Taking the clean out cap off will allow you to drain the extra water, which will save your property from flooding. When there is an issue with the municipal sewer that is forcing water back up into your lateral, this may also be beneficial.

How to Install a Sewer Clean Out

It is necessary to complete many steps in order to install a clean out. Depending on the circumstances, your local municipality may provide programs to assist with the cost of installation, particularly in situations where a sewer clean out was not previously required by code. Before you begin, make sure you check for any available programs or grants, as well as any necessary permissions or licenses. It is also recommended to get expert assistance if you do not have prior experience splicing or installing sections of pipe in order to prevent making costly blunders.

Choosing a Clean Out Type

The first and most important step before starting any work is to choose the sort of sewer clean out you will be using. There are three alternatives accessible at the present time: Double Clean Out– The double clean out is the most common type of clean out used in contemporary installations. It contains two shafts that link to the lateral pipe in a ‘U’ configuration, making it the most common type of clean out used in modern installations. The cap that is closest to your home allows for simple access to the city end of the lateral, but the cap that is closest to the street allows you to preserve the house end of the lateral (see illustration).

Despite its T design, the test tee clean out provides access to both ends of the lateral, but it can be difficult to use for clearing obstructions owing to a 90 degree angle at the intersection.

Excavation and Installation

A segment of pipe will need to be excavated in order to find your lateral line. This can be accomplished using either conventional hand tools or leased equipment, with caution to avoid damaging the lateral pipe. As soon as you have completely exposed the required area of the pipe, you should measure out the length of pipe that will be removed. The type of cutting equipment you’ll need will depend on the material that your lateral pipe is constructed of. Once the undesirable portion has been removed, you will be able to measure, cut, and install the new junction section in its place.

Most of the time, it’s advisable to put a container box around the top to keep it from being overgrown or buried too quickly.

Professional Cleaning Cost with a Sewer Clean Out

Even while cleaning your own lateral line may appear to be a cost-effective choice, there is always the possibility of causing damage to the pipes. A professional plumber can complete the task more efficiently and at a lower cost if they have access to the sewage system through a sewer clean out. As a result, they use less tools and less effort than if they were required to dig up your yard or snake the lateral from an interior location of your property. With a basic estimate range of $99 to $900 and an overall average of $288, HomeAdvisorgives provides a reliable service.

When it comes to costs, CostHelper gives more specific estimates, with an estimated cost of snaking your lateral ranging from $148 to $900, with an average cost of $410.

Additional costs will include a video examination of the line, which will cost between $100 and $800.

Some plumbing businesses may quote you a fixed charge but then urge you to tack on extra services in order to raise the total cost of the job.

There’s a Backup: Plumbing or Septic Tank Problem? [Video]

Published onWhen your plumbing backups and enters your home, it can be difficult to determine if you should call a plumber or an experienced septic repair company. Despite the fact that plumbers and septic maintenance providers appear to deal with the same types of septic system problems, the truth is that these two businesses do not overlap; a plumber does not have the knowledge or equipment necessary to fix septic systems, and we are not equipped to deal with plumbing emergencies. This short video from Chad provides some pointers on how to determine whether to contact a septic system maintenance company like Van Delden or a plumber when your plumbing starts to back up.

It is the short PVC pipe with detachable cap that protrudes from the ground between your house and your septic tank, and it is responsible for cleaning up the septic system.

Alternatively, if there is no backup in the septic cleanout, we recommend that you contact a plumber since this is an indication that the wastewater from your residence is not making it to the cleanout. Back-up from the cleanout might be caused by either the septic system or an obstruction between the cleanout and the tank if the cleanout does not contain any water. A plumber is likely to be required in this situation, and a septic maintenance company is also likely to be required
In this scenario, the odds are 50/50.

Check your septic tank’s liquid level

You may also peek straight into your septic tank to see whether the liquid level is normal or excessive if your tank is accessible or if you are ready to dig up the tank’s cover to access the tank. A normal liquid level indicates that you should contact a plumber, while an overfilled tank indicates that you should contact a septic firm.

Your septic system’s age can be a factor

Because there is no cleanout or means to monitor the liquid levels in your septic tank, there is no way to tell for certain which service is required; nevertheless, the age of your septic system can assist you identify who you should contact for the problem at hand. The typical lifespan of a septic system is around 25 years, depending on how well it is maintained and how frequently it is used. You may want to try hiring a plumber first before calling a septic system maintenance company if your system is more recent.

Are you experiencing issues with your septic tank?

We promise there will be no sales pitches, only straightforward answers to your septic system inquiries and concerns.

Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future.

Make a call to us for any of your wastewater system requirements, and let our pros to assist you with your septic installation and maintenance requirements: To reach us in San Antonio, please dial 210.698.2000 or 830.249.4000. (Boerne).

Tips for Installing Accessible Clean-Outs

Receive articles, news, and videos about Systems/ATUs sent directly to your email! Now is the time to sign up. Systems/ATUs+ Receive Notifications A thorough cleaning is necessary for all systems. The installation of a clean-out at an exterior wall of a residence or company is recommended in case the system ever has to be jetted or cleaned. The clean-out allows all of this work to be completed outside, ensuring that any mess is contained to the outside. There is the risk that the clean-out will be disguised within the house, as well as the danger of a significant leak.

A clean-out that is both directions Clean-outs should be easily accessible from the surface and, where necessary, should be housed in a protective enclosure such as a valve box.

The clean-out at the exterior wall may be located either within or outside the building, and it should be manufactured with a complete “Y” branch fitting that extends at least 2 inches above grade or finished floor, unless when a flush cover is required in high-traffic sections of the structure.

It is recommended, and in certain cases, mandatory, that the distance between clean-outs in horizontal pipework does not exceed 100 feet in straight lines in straight runs.

Unless put beneath an authorized cover plate or flush with the completed floor, each clean-out in a residence shall be at least 2 inches above grade, easily accessible, and not covered with cement, plaster, or any other permanent finish material, according to building codes.

Clean-outs in soil treatment systems

Clear-outs for pressure distribution pipes should be done to ensure that the system is operating properly and to clean any clogged perforations in the pipe. Access to the clean-outs should be available from the final grade level. These clean-ups should include the following:

Threaded detachable caps or plugs should be installed on the ends of the laterals to enable for cleaning of the laterals and to monitor lateral pressure. To be big enough to enable for the removal of caps or plugs with hands, tools, or other objects

It must be accessible from the ground level

In pressurized laterals, clean-outs are installed at the distal end to allow for the flushing of the system prior to starting, the monitoring of the operating pressure, and the regular flushing away of particles. Sweep clean-outs at 90 degrees The clean-out pipe layout varies, but the most simple and convenient clean-out consists of a 90-degree turn up in the pipe. It is possible to employ two 45-degree elbows or one sweep 90-degree elbow. The usage of these allows the service provider to clean with a pressure washer or bottlebrush since the gradual turn allows for the simple insertion of the pressure line into the pressure line fitting.

Ball valves can also be fitted at the distal end of the lateral in a vertical position as an alternative to the above.

It is necessary to have a hole about halfway up the elbow to ensure that air may re-enter the pipe once the pump has been turned off.
It is advised that rock be placed in the box to plug the perforation in order to prevent effluent from spraying freely into the container.
In colder locations, it is also advisable to include insulation on the lid of this box.

Make certain that the access is completely stabilized in order to prevent movement during backfill activities and after the installation is complete.
a little about the author: Sara Heger, Ph.D., is an engineer, researcher, and lecturer in the Onsite Sewage Treatment Program at the University of Minnesota’s Water Resources Center.
She has given presentations at several local and national training events on topics such as the design, installation, and administration of septic systems, as well as research in the related field.

Send an email to [email protected] if you have any concerns concerning septic system care and operation. Heger will respond as soon as possible.

Pumping (Cleaning Out a Septic Tank)

The majority of residential septic tanks need to be cleaned every three to five years. When solids fill between one-third and one-half of the tank, it is necessary to pump the tank. If this occurs, the only way to determine when it does is to have your tank inspected by an experienced septic contractor. When the following situations occur, the contractor will propose that a qualified septic pumper be hired:

There is a 6 inch gap between the bottom of the scum (grease) layer and that of the bottom of the outlet tee
And a 12 inch gap between the top of the sludge layer and the top of the outlet tee.

After the tank has been pumped, there is no need to “reseed” it with new material. Seeding is the process of promoting excellent bacterial growth by introducing substances such as yeast, dung, or dead animals. The Department of Health and Human Services does not propose seeding the system since the sheer act of utilizing the system will give all of the germs necessary to ensure that the system functions properly. Yeast, dung, meat, and dead animals will not aid in the development of the colony of bacteria in the tank any quicker than they already are.

General Advice on Septic Tank Pumping Frequency

A single tenant has a pump that has to be replaced every 12 years
Two people have a pump that needs to be replaced every 6 years

Four inhabitants have a pump that needs to be replaced every 3 years. The number of inhabitants is six, and the pump is replaced every two years. The number of inhabitants is 8
The pump is replaced once a year.

A single tenant has a pump that has to be replaced every 12 years
Two people have a pump that needs to be replaced every 6 years
Four occupants have a pump that needs to be replaced every three years. 6 people live there
The water is pumped every two years. — Pumping every year for a total of 8 residents.

Pump every 19 years for one resident
One pump every nine years for another resident
Four pumps every four years for the remaining inhabitants
And one pump every four years for the remaining occupants. A pump is required for each of the following numbers of residents: 6 for every 3 years
8 for every 2 years.

5 Signs Your Septic Tank Needs Cleaning Now — Waste Away Systems

Septic tank systems are required for homes and business properties that are not linked to municipal sewage systems in order to safely store raw sewage and solid waste. Despite the fact that the typical capacity of most septic tanks is between 750 and 1,250 gallons, they will eventually get full, necessitating frequent cleaning and maintenance to ensure that they continue to work properly. Make it a priority to get expert septic tank cleaning services whenever possible to ensure that your property is safe, hygienic, and clean when visitors or customers come to visit.

Safe Solid Waste Storage

Getting rid of garbage is an essential component of every well-functioning property, regardless of its size. Unless your property is connected to a local or municipal sewage system, you will almost certainly require a septic system, whether you own a business or residential piece of land. Because there are several benefits to having a septic tank installed on your property, this is a popular decision for both homeowners and business owners alike. To begin, let’s go through the main reasons for establishing a septic system and why it’s important to do it at the appropriate time of the year.

Filters wastewater, resulting in a healthier environment. Store organic materials in a secure location away from your house or building. Septic systems that are built to endure between 20 and 40 years are considered to be durable. The cleaning of septic tanks on a regular basis supports responsible homeownership. Seasonal maintenance is straightforward
The ability to use a variety of programs
Options for septic tanks that are reasonably priced

Aerobic septic tanks driven by electricity are the most prevalent types of septic tank systems, with fiberglass, cement, and steel being the most common materials used in their construction. Consult with a waste disposal professional to determine which type of septic tank is most appropriate for your house or company. It is possible to schedule regular maintenance, including septic tank pumps and cleanups, with a reputable waste management firm in your neighborhood if you establish a connection with them.

5 Signs It’s Time for a Septic Tank Cleaning

Despite the fact that some septic systems can contain more than a thousand gallons of solid and liquid waste, there will always be a point at which the tank will become overflowing and will require a full cleaning. Septic system cleaning should be performed by an experienced septic pumping firm to ensure a new start.

Keep an eye out for these telltale signals that it’s time to call your chosen septic tank cleaning business to come out and get the job done reliably, effectively, and in an ecologically conscious manner.

1. Foul-Smelling Odors

The emergence of foul-smelling odors in your septic tank is the first sign that it is time to pump your system. It goes without saying that any type of human or organic waste will have an unpleasant odor, but septic tanks are designed to help reduce that odor as much as possible. By the time your septic tank reaches its maximum capacity, foul-smelling vapors from within the tank will have infiltrated the surrounding air and become increasingly evident over time. Other difficulties, such as leaks or cracks in your septic tank, might be indicated by the presence of odors.

2. Sewage Backups

Because of the weight of the sewage in your septic tank, it is quite easy for it to back up into your house or place of business, inflicting substantial, expensive, and in many cases irreparable damage. Backups of sewage or solid waste are something that you do not want to happen in your home or company, thus it is important to keep a watch on the lowest drain levels for any indicators of backed-up sewage or solid waste.

3. Slowed Drainage

Sinks and tubs drain quite fast in most cases, although slower drainage isn’t usually a big problem for the majority of homeowners. The drainage rate can, however, become substantially slower when a septic tank is nearly full, suggesting the need to pump your septic tank. Make a thorough observation of the water in your building and timing the drainage to see if it is particularly sluggish or perhaps completely stagnant. Request high-quality septic tank cleaning services as soon as drainage times slow or cease entirely to avoid further damage.

4. Issues Flushing

Another sign that you should consider scheduling a septic tank cleaning is if you experience difficulties flushing your toilet or draining sinks and baths in your home. It is possible to tell whether your septic tank needs to be cleaned and inspected by looking at how difficult it is to flush it and how much water is bubbling. Septic tanks will always require cleaning at some point, but homeowners may take steps to reduce the impact of these cleanings on their pipes and septic systems by following these guidelines.

These include:

Cleaning products such as cat litter and chemicals, sanitary napkins or tampons, paper towels and napkins, diapers, and grease or cooking oil are all examples of products that fall under this category. Hair
Medications on a prescription basis
Cotton balls, bandaids, and other personal care goods are available for purchase.

As soon as you discover any problems when flushing or draining various basins in your house or building, call a reputable septic cleaning business in your region for assistance. Regular septic system maintenance from a reputable waste management firm is your best chance for keeping your system clean.

5. Pooling Water

Last but not least, you’ll choose the best time to clean your septic tank when pooling water begins to emerge on your land. I hope your tank never reaches to this position, because it may do serious harm to your property, soil, and possibly your house or company if left unattended for a long period of time. An overflowing septic tank can cause pooling water to build near drain fields, which is a frequent symptom of the problem. One approach to identify this problem is to look at your pooled water levels after a rainstorm; if they are much higher than normal, your septic tank is most likely full and in need of cleaning.

To address pooling water on your property, schedule a meeting with a local home or commercial waste management business to design a strategy that includes pumping your septic tank until it is clean once again.

Get Professional Septic Tank Cleaning Services

If your property’s sewage tank is large, it may take some time until the container is completely filled and no longer has to be cleaned. When you see indicators of a clogged septic tank, such as pooled water or a strong odor, call a septic tank cleaning service, such as Waste Away Systems, to take care of the dirty job. Once your septic system has been thoroughly cleaned and disinfected, your property will be able to continue operating at full capacity until a subsequent clean-out is necessary.

Septic System Cleanout Service — Waste Away Systems

SERVICING YOUR SEPTIC TANK COULD COST AS LITTLE AS $255.00! Septic tanks are required for homes and business properties that are not linked to municipal sewage systems in order to securely store solid waste and raw sewage. All types of septic systems require frequent cleaning and maintenance to ensure that they continue to operate properly. The efficient operation of your septic system is critical to the overall function of your property. Septic tank cleanouts are necessary when there are problems with your septic system, such as plumbing backing up into the home or bad aromas emanating from the system.

You won’t have to be concerned about these types of septic concerns if you prioritize expert septic cleanout services, which will keep your property safe and hygienic at all times.

One of our disposal specialists will be able to examine any issues and will be able to pump and clean out your septic tank if necessary.

Our Types of Septic System Services

Septic tank pumping should be scheduled on a regular basis for homeowners who have septic systems. Pumping the septic tank entails entirely emptying the tank and removing sludge from the bottom of the tank, which takes many hours. It is critical to have your residential septic tank pumping done because the sludge can accumulate and clog the outlet line, which is where the liquid drains into the drain field. The frequency with which you have your septic tank pumped will be determined by a number of factors, including:

The size of the septic tank
The size of the household
What much of wastewater is produced
The amount of solids present in the wastewater
And It is necessary to have electrically operated float switches, pumps, or other mechanical components. Using a septic tank

Maintenance on different types of septic systems will be required in the future. Larger homes tend to generate more waste, which means the septic tank will fill up more quickly. Additionally, households who use their garbage disposals on a regular basis will have their septic tank fill up more quickly. It is advised that you get your septic tank examined and pumped every two to three years, at the absolute least, and every three to five years, at the most.

Septic System Maintenance

Regular maintenance, in addition to septic tank pumping, may assist you in avoiding septic system servicing concerns. We at Waste Away Systems specialize in septic system services, so you won’t have to be concerned about more serious issues that might arise from your septic system. Keep your septic tank in excellent functioning order between pumpings is critical to its longevity and effectiveness. Here are a few indicators that you may require septic tank maintenance: You may notice the scent of bad smells coming from your septic tank when it is approaching capacity.

When the tank is full, sewage might overflow and back up into your house or place of business, causing damage.
The septic tank may be overflowing, which may cause drainage to be slower.
Concerning septic system flushing: If you want to maintain your septic system working properly, you should never flush some dangerous products.
Water Pooling Around Drain Fields: If you find water pooling around drain fields, it is possible that your septic tank has spilled and backed up.

We encourage you to contact us if you have had any of these problems or want to guarantee that your septic system is properly maintained. In order for your property to continue working properly, Waste Away Systems is pleased to take care of any septic tank needs you may have.

Commercial Septic Services

Providing septic tank services to both residential and commercial sites is something that Waste Away Systems is proud to do. Waste management at your company may be handled through the use of a septic system. Make an appointment with a professional for regular maintenance and cleaning to ensure that your system continues to operate effectively. Companies that use septic systems do not want to be burdened with the expense of dealing with septic tanks that are not operating properly. When you rely on Waste Away Systems, you can be assured that your business property will remain productive and safe.

Your Go-To for All Solid Waste Services and Recycling

Garbage Away Systems has been providing waste removal services to the residential, commercial, and industrial sectors since 1976, and we have refined our processes over the years. It is our pleasure to provide industry-leading, dependable garbage removal services as a family-owned and run solid waste and recycling company in the greater Philadelphia area. Our clients know they can count on us to deliver on our promises every time. We also make an effort to raise environmental awareness in each service area, because our neighborhoods and commercial spaces must be maintained clean in order to function properly.

The following services are available: a full-service transfer station, residential waste recycling services, commercial waste recycling services, roll-off large-scale disposal, aggregates, storage solutions, affordable portables, recycling, and septic cleanout services.

Whether you want garbage collection or a septic tank cleanout, the staff at Waste Away Systems is here to assist you. Contact us now. Our septic cleanout services ensure that your septic system will continue to operate securely and effectively, without experiencing any severe complications in the process. By arranging for regular septic treatment with Waste Away, you can keep your home free of any unpleasant septic problems in future. Give us a call now if you have any questions regarding our septic services or any of our other services.

Septic Cleanout – When to Complete a Septic Cleanout

Septic system clean-outs are one of the most dreaded tasks a homeowner has to face. Furthermore, it is an exceedingly expensive operation that takes a long time to complete. Most people cannot afford the cost of having their septic system removed, and this is something that they will have to pay in the end. Listed below is some useful information that will assist you in understanding what to expect during your septic clean-out. If your home has been out of service for a few days, it is possible that your septic system has reached its maximum capacity, which will cause it to overflow.

Aseptic clean-out companies will come in and remove all of the garbage that has built in your septic system over the course of the last several months.
Your septic system is pumped with new sewage once more, and all of the solid waste material that the system was unable to collect is flushed out the opposite end of the system.
Once this is completed, your system should run well and return to service as soon as possible.
If you notice any wood, grass, or shrubs coming up near the septic lines, you must remove them as soon as possible to avoid further damage.
Your septic clean-out crew should be able to tell you exactly what is causing the obstruction and how far down the line you need to go to clear it out.
Once all of the garbage and debris has been removed, a specialized tool may be used to clean out the septic system during the clean-out process.
It is possible to use a screed to route all of the waste materials in an area once it has been acquired.
For many individuals, the most difficult aspect of maintaining their septic systems is dealing with the large amount of waste that is flushed down the toilet on a daily basis.
Your septic tank’s self-cleanout procedure leaves behind a liquid that has to be disposed of properly.

If this happens, the septic system will need to be fixed, which may be rather expensive. By employing a “screed,” you will be able to pull out any of the minor underlying problems that may be causing the septic system to malfunction.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

Inspect and pump your drainfield on a regular basis
Conserve water
Dispose of waste properly
And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

The size of the household
The total amount of wastewater produced
The amount of solids present in wastewater
The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system.

A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

Cooking grease or oil
Wipes that are not flushable, such as baby wipes or other wet wipes
Photographic solutions
Feminine hygiene items Condoms
Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.