What Does A 2000 Gallon Septic Tank Cost? (Solution found)

Answer: The average retail cost of a 2000 gallon concrete septic tank is $2250.

How much do septic tanks cost to install?

  • A traditional septic tank for a 3-bedroom house will cost around $3,900 to install on average. For conventional systems, prices start around $5,000 in the Midwest, whereas in coastal areas, one could cost $10,000 or more. For an engineered system, the costs will average around $15,000 for installation.

How often should a 2000 gallon septic tank be pumped?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

What is the cheapest septic system?

Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

What are the alternatives to septic tanks?

Alternative Septic Systems

  • Raised Bed (Mound) Septic Tank Systems. A raised bed drain field (sometimes called a mound) is just like what it sounds.
  • Aerobic Treatment Systems (ATS) Aerobic systems are basically a small scale sewage treatment system.
  • Waterless Systems.

How big of a septic tank do I need?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How much does a 900 gallon septic tank cost?

Most homeowners pay $12,000 to $20,000 to install a five-bedroom house system. A tank up to 1,500 gallons should suffice, which comfortably handles anywhere from 600 to 900 gallons of water a day. Like the systems for a house with three or four bedrooms, a five-bedroom system cost varies by tank material and design.

Are plastic septic tanks good?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,451, with an average cost of $6,804 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,804
Typical Range $3,157 – $10,451
Low End – High End $450 – $21,000

The cost information in this report is based on real project costs provided by 948 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

It costs between $10,000 and $20,000 to construct a mound septic system. In places with high water tables, thin soil depths, or shallow bedrock, it is the most costly system to build; yet, it is frequently required. It depends on a raised mound of sand to serve as the drain field rather than digging into the ground. In addition to the additional gear required to pump wastewater upward into the mound, it will incur additional costs in terms of the materials and labor required to construct the mound itself.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.

After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

See also:  How To Calculate Septic Tank Absorption Area? (Solution)

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets.

One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Your septic system is responsible for disposing of everything that goes down your drains and into your toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless absolutely necessary. You should never flush the following down the toilet or pour it down the sink drain.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

Average costs for fiberglass septic tanks range from $1,200 to $2,000, excluding installation costs. It does not shatter or corrode readily, but it is prone to harm during installation, much as plastic is during transport and storage. As a result of its lighter weight and greater vulnerability to structural damage, the tanks themselves can move in the soil underneath them.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.

In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

What it’s comprised of and how it functions. Concrete tends to require more upkeep, although commercial-grade fiberglass and plastic are known to persist for decades in most situations. Your ability to keep things looking well. Every 1 to 3 years, have your system inspected and pumped out, and every 3 to 5 years, have it pumped out again. Is there any vehicle traffic across the leach field as a result of this? It is possible that driving over the leach field will cause it to fail. What is the soil’s chemical composition?

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

The typical cost in the United States ranges from $500 to $5,000. The national average cost of a septic tank installation or the cost of replacing an outdated septic system is dependent on a number of different variables.

Septic Tank Installation Average Costs
National Minimum Cost $500
National Maximum Cost $5000
National Average Cost $1500

According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.

Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.

The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.

Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.

Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.

What’s in this cost guide?

  • Soil type
  • Tank size and kind
  • Equipment
  • Installation
  • Maintenance
  • Lift station
  • And more. Septic systems that are not conventional
  • How septic tanks function
  • Signs that you need to upgrade your system
  • How to employ a professional

Alternative septic systems

Alternative techniques are particularly effective on steep locations, highly rocky land, or poor soil. Among the options available are aerobic septic systems, mound septic systems, raised-bed septic systems, and others. The cost of a septic system installation or replacement may be greater or cheaper than the average depending on the area and kind of system. Locate the most qualified septic system consultant for your project needs. Zip code must be entered correctly.

Signs you need a new system

Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.

Knowing what indicators to look for might help you catch an issue before it becomes a major problem.

This includes having your septic tank pumped out by a professional every three to five years.

Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.

How Much Do Septic Tanks Cost?

As an alternative to hooking up your home to a municipal sewer system, you may install a septic system on your own, which is composed of a container placed underground on your land that retains and processes the water and waste that escapes your home through plumbing pipes. Septic tanks should only be installed by qualified specialists, whether you’re building a new house and need a septic system installed or replacing an existing septic system. Because of the project’s intricacy and magnitude, heavy machinery, precise excavating, and plumbing hookups are required, all of which might be devastating if not completed correctly.

  1. Properties in areas where the earth floods often, for example, would experience a high frequency of septic issues.
  2. After that, a contractor must excavate in the vicinity of the tank and drain field in preparation for installation, which will involve plumbing connections to the residence.
  3. Septic system installation needs meticulous design, the knowledge of a professional, and at the very least a few thousand dollars to be completed properly.
  4. What Is the Average Cost of a Septic Tank?
  5. It is possible that you have already attempted to repair your septic tank or system, therefore this fee will be in addition to your original investment.
  6. Glenn Gallas, vice president of operations at Mr.
  7. It is possible that you will spend even more depending on the size and location of your property, as well as the size and substance of your tank and the type of septic system you want.
See also:  What Does It Mean On Septic Tank? (Solved)

A septic tank can be constructed from four different types of materials: —Concrete.

—Plastic.

—Fiberglass.

—Steel.

Steel is the least popular building material on the market today.

One thousand gallon tank for a three-bedroom house with less than 2,500 square feet.

Septic tanks under 1,000 gallons in capacity are expected to cost between $600 and $1,000, according to HomeAdvisor, while tanks of 1,200 gallons or above in capacity are expected to cost between $1,200 and $1,600, according to the same source.

Septic tank installation will be delayed if there is a lot of rain that soaks the soil, according to Michael DeCosta, director of branch operations for mergers and acquisitions at Wind River Environmental, a mechanical systems contracting company that installs and repairs septic tanks, among other specialties.

  1. “If you go to Florida or Cape Cod, where there’s a lot of sand, such installations take a day,” adds DeCosta, who is headquartered in the Boston region.
  2. When it comes to designing a septic system, DeCosta explains that in many cases the local planning agency or board of health will provide a list of qualified engineers from which to pick.
  3. The blueprints may then be sent to multiple septic installers for price and assistance, DeCosta explains.
  4. The overall cost of your septic system installation varies depending on the size of your home, the size of your land, the proximity to a floodplain, the soil, the type of tank material you select, and a variety of other factors.
  5. If you’re planning to replace any element of your present septic system, a septic installation specialist will most likely want to come out to your site to take measurements and search for problems before proceeding.
  6. Multiple professional visits for estimates may appear to be excessive, but the information you acquire from each interaction may help you determine which firm offers the best materials and timing for your project, rather than simply choosing the lowest price.
  7. Listed below are a few of the components that contribute to the overall cost of a septic system installation or the cost of replacing an existing tank: • Sewer line • Distribution box • Field lines • Sewer line — Drainage field, also known as a leach field.

– The tank’s lid.

— Tank top.

In the event that only one or two components of the system appear to be causing the problem, Gallas says that the sewage line, septic tank, distribution box, and field lines can all be replaced independently.

Maintenance, on the other hand, is essential since little faults can accumulate over time and generate greater ones.

Depending on the expert, a septic tank should only need to be drained every three to five years.

If you discover a problem with your plumbing or observe water backing up into your house, call a plumber to come out and analyze the problem for you.

According to HomeAdvisor, a plumber’s hourly rate typically ranges from $45 and $200, depending on where you reside in the country.

More from the news organization U.S. News & World Report What Is That Strange Smell in My Home? 15 Mudroom Design Ideas for Your Residence Choose Energy-Efficient Windows for Your Home Using This Guide What Is the Average Cost of a Septic Tank? The article first published on usnews.com.

More from WTOP

A Quick Look at Septic Tank Prices

  • Total cost: $3,900 on average
  • $1,500 to $5,000 on a sliding scale
  • Anaerobic septic tanks cost between $2,000 and $5,000
  • Aerobic septic tanks cost between $10,000 and $20,000
  • Gravity septic tanks cost between $1,500 and $4,000
  • Mound septic tanks cost between $10,000 and $20,000
  • Chamber septic tanks cost between $1,500 and $5,000
  • Conventional septic tanks cost between $2,000 and $5,000.

The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.

What Is a Septic Tank?

A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree. It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. After that, the liquid waste is filtered away.

How Much Does It Cost to Install a Septic Tank?

In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.

Types of Septic Tank Systems

Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:

Anaerobic Septic System

Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.

Aerobic Septic System

Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated. It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones.

Gravity Septic System

Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.

Conventional Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily.

In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.

Mound Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste water. Construction of the trench is based on stone or gravel, and it allows for the passage of water. In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and around the perimeter. An extensive area is required for the proper operation of a traditional septic system. Depending on the system, installation costs range between $2,000 and $5,000.

Chamber Septic System

Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.

Septic Tank Materials

Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:

Concrete

Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.

Fiberglass

Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.

Plastic

Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.

Steel

In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained. As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.

What Size Septic Tank Do You Need?

The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.

Two Bedrooms

A septic system with a minimum of a 750-gallon septic tank is required for a two-bedroom residence.

However, in many localities, a 1,000-gallon tank is the least capacity that may be accommodated.

Three Bedrooms

A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.

Four Bedrooms

A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:

  • How to keep the cost of septic tank pumping to a bare minimum
  • 3 Symptoms of Sewer and Septic System Problems
  • Do you have a clogged sewer line? Here’s What You Should Do
  • Water Sewer Line Repair: Do It Yourself or Hire a Professional
  • Listed here are 15 common plumbing problems that every homeowner should be aware of.

Septic Tank Repair Costs

It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:

Drain Field

Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.

Tank Pump

A replacement septic tank pump typically costs between $500 and $1,200.

Tank Filter

It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.

Tank Lid

Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.

Tank Baffle

The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.

Additional Factors to Consider

A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.

See also:  Where Is Bevel On Septic Tank? (Best solution)

Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.

How Long Does a Septic Tank Last?

The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.

In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops. We’ll dispatch one of our locally based, licensed, and highly qualified professionals to complete the work for you right away.

How Much Does a Septic System Cost?

Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas Enhanced System: $10,000-$20,000+
For homes that aren’t connected to a municipal sewer plant, a septic is an on-site system that collects, treats and disposes of household wastewater by slowly filtering it through underground soil. Typically there are two main parts, a septic tank and a soil absorption system (also called a drainfield, leachfield or disposal field). These are located underground and connected to the house by sewage pipes.Typical costs:
  • The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
  • New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
  • For more information, contact your local or state sanitation agency.

Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes What should be included:

  • It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
  • Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
  • The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
  • New grass and other plantings can cost anywhere from $100 to $1,000 or more.
  • Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
  • To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
CostHelper News What People Are Paying – Recent Comments Page 2 of 2-Previous12
Posted by:Fredbill in Ashland, VA. Posted:October 28th, 2020 10:10AM
Type:PVC pipe

When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?

Posted by:Fiorella in Miami, FL. Posted:July 28th, 2020 05:07PM
Type:Conventional septic

Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?

Posted by:Dorie Dew in Nederland, CO. Posted:May 22nd, 2020 02:05PM
Type:leach field install

I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!

Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system

1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com

Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system

1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.

Posted by:Gregory Chappel in Trinidad, CA. Posted:August 15th, 2019 01:08PM
Type:New tank and drain field

1500 gallon tank, 4″line, 90′ rock trenches took 3 days

Posted by:Unclebob in McArthur, CA. Posted:January 26th, 2019 09:01AM
Type:Trailer park

I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda.

I mix a pound of each and flush it down a toilet every couple of months. My Pumpings have gone from every 6 months to every 3 years, and it is not as bad at 3 years as it used to be at 6 months. Sams club and Costco sell it in bulk cheap.

Posted by:a user in moreland, GA. Posted:July 20th, 2018 12:07AM

That seems like a lot of money for s single drain line

Posted by:Sfr Development LLC in Boone, NC. Posted:August 11th, 2017 12:08PM
Type:Conventional 2 Foot Chambers

1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines

Posted by:rrrr in berlin, NJ. Posted:July 12th, 2017 02:07PM
Type:septic

location-south jersey-sandy soil approx cost please? looking for economy and conformity.

Posted by:Any Help Appreciated in Charleston, SC. Posted:May 12th, 2017 08:05AM

Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated

Posted by:Ken Carbaugh in Leesburg, VA. Posted:June 20th, 2016 06:06PM
Type:conventional to alternative systems

A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.

Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.

Posted by:Bob42 in High rolls, NM. Posted:March 25th, 2016 12:03PM
Type:Concrete tank, leachfield

$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.

Posted by:Susana in cumming, GA. Posted:August 24th, 2015 04:08PM
Type:treating the leach field

I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?

Posted by:payed too much? in Effort, PA. Posted:August 2nd, 2015 11:08PM
Type:dual tank w mound

Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.

Posted by:Daytrp in Eldersburg, MD. Posted:July 17th, 2015 08:07PM
Type:Repair – new construction

Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.

Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.

Some states Have programs to help upgrade your septic tank. Check with your county health department.I bid these jobs and this is my basic start point. Specailty jobs, difficulty of access, heavy rock, all add to the bid price

Posted by:ABMCCAA in Bakersfield, CA. Posted:June 26th, 2015 05:06PM

New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.

Posted by:andrewbasil in hemet, CA. Posted:March 23rd, 2015 06:03AM
Type:simple leach line replacement

75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job.

Help me out here what do I do?

Posted by:ltodd kinsey in cda, ID. Posted:February 26th, 2015 11:02PM
Type:all

If properly maintained a working system should never need pumped

Posted by:M. IRIARTE in STROUDSBUR, PA. Posted:February 4th, 2015 05:02AM
Type:SEPTIC

ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK Page 2 of 2-Previous12 External Resources:

  1. Twri.tamu.edu/reports/1999/l5234.pdf
  2. sohioline.osu.edu/aex-fact/0744.html
  3. s

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does a Kitchen Remodeling Cost? How Much Does a Propane Tank Cost? How Much Does a Plumber Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Leave a Comment

Your email address will not be published. Required fields are marked *