What Are The Dimensions Of A 1000 Tank Rectangular Septic? (Best solution)

Table of Concrete Septic Tank Outside Dimensions, Capacity, Other Data
Rectangular Concrete Septic Tank Size (Gallons Capacity) Tank Length (Inches) Tank Width (Inches)
1000 low profile 120 67
1000 /600 145 in. 68 in.
1200 111 78

10

  • The number of bedrooms and number of people in your home will determine the dimensions of the septic tank you need. 1,000-gallon septic tanks are 8 feet 2 inches long, 5 feet 8 inches wide, and 5 feet 1 inch deep.

Is a 1000 gallon septic tank big?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

How long does it take to fill a 1000 gallon septic tank?

Therefore, it will take about 5 years for one adult to fill 300 gallons of a 1,000-gallon septic tank with sludge and scum. A family of four will fill the 300-gallon storage volume of a 1,000-gallon septic tank in about 1.5 years.

How much does a 1000 gallon concrete tank cost?

A 1,000-gallon precast concrete tank — adequate for a 3-bedroom home — generally costs $600 to $1,000.

What is the largest septic holding tank?

The 10,000 gallon holding tank is the ideal waste containment solution to service multiple rural homes, a farmstead complex or a commercial operation. While this model is our largest septic holding tank, multiple tanks can be installed to meet any requirements and to allow for future expansion.

What is the smallest septic tank available?

If you’re looking to install a septic system, the smallest tank size you’re likely to find is 750-gallon, which will accommodate one to two bedrooms. You can also opt for a 1,000-gallon system, which will handle two to four bedrooms.

How big are underground septic tanks?

Underground septic tanks are available in sizes ranging from 200 gallons up to 1500 gallons. An inlet and outlet may be added to tanks sized 200 gallons to 500 gallons for $75.00. Manufacturers will install 4” inlet and outlet plumbing kits for the septic tanks when requested.

How do I calculate the size of my septic tank?

The formula is length (feet) x width (feet) x 1 foot x 7.5 gallons, which is the volume for 1-foot depth. To find the volume for 1 inch I divide the volume by 12 to give me gallons per inch. For our example this is 5.16 feet x 7.5 feet x 1.0 foot x 7.5 gallons per cubic foot = 290.2 gallons.

How do I calculate the size of my septic drain field?

Drainfield Size

  1. The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
  2. For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.

What is a good size septic tank?

The recommendation for home use is a 1000 gallon septic tank as a starting point. The 1000 gallon size tank is a minimum and *can be suitable for a 2 bedroom, 3 bedroom house. Some recommendations say to add an extra 250 gallons of septic tank capacity for each bedroom over 3 bedrooms.

What is the size of a thousand gallon septic tank?

Table of ConcreteSeptic TankOutsideDimensions,Capacity,Other Data
Rectangular ConcreteSeptic Tank Size(Gallons Capacity) Tank Length(Inches) Tank Width(Inches)
1000heavy duty 96 78
1000low profile 120 67
1000/600 145 in. 68 in.

SEPTIC TANK WITH 1000 GALLON CAPACITY102″ LENGTH69″ WIDTH59″ HEIGHT59″ WEIGHT 8600 LBS. Aside from that, how much does a 1000-gallon concrete septic tank cost? The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene. A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between $600 and $1,000. How can I figure out the size of my septic tank in this method, exactly? The size of the septic tank should be determined mostly by the square footage of the house and the number of people who will be living there.

A 1000 gallontank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

Septic Tanks Made of Plastic

Name Capacity
750 Gallon Septic Tank – 1 Compartment / 2 Manholes 750 Gallons
750 Gallon One Compartment Plastic Septic Tank 750 Gallons
750 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) 750 Gallons
750 Gallon 1 Compartment NexGen Septic Tank (Loose Plumbing) 750 Gallons

1000 Gallon Septic Tanks

Our 1000 gallon septic tank, which is constructed of precast concrete, has a capacity of 1000 gallons of liquid capacity. With this mid-seam design concrete septic tank, you may connect the pipe from the home to either one of the tank’s side or center inlets, depending on your preference. The same choice is accessible at the tank’s outlet, whether it is exiting to the leach field from the tank’s side or exiting from the tank’s central outlet. To connect the pipe entering and exiting the precast construction, Polylok IV closed-end boots are utilized.

ASTM C 1227NPCA is fully compliant with all best-practice criteria.

1000 Gallon Septic Tank DimensionsDetails
Tank dimensions 8’ x 5’8” x 5’2”
Number of bedrooms supported Formerly 2 Now used as a pump station, holding tank, or adding to an existing system
Pre-assembled Yes
Ideal for high water table No, but our 1000 gallon monolithic septic tank is.
Average retail cost $1062.50
Number of covers (lids) 2
Can come in traffic rated (H20) capacity Yes
Concrete strength 5,000 PSI
What are its gallons per vertical inch 21
Weight 8,600 lbs.
Fiber re-enforced Yes
Number of inlets boots (Up to schedule 40pipe can slide through) 3
Height of inlet from bottom of tank to bottom of pipe 51”
Number of outlets boots (Up to schedule 40 pipe can slide through) 3
Height of outlet from bottom of tank to bottom of pipe 48”
Required height of inlet baffle (20% of liquid level) 9”
Required height of outlet baffle (40% of liquid level) 18”

Frequently Asked Questions

In response to your question, the typical retail price for a 1000-gallon concrete septic tank is $1062.55.

What is the most common septic tank size?

Answer:It is a 1000 gallon septic tank across the United States, however it is rarely utilized as a septic tank in New Hampshire. By updating the state standards in 2012, the Department of Subsurface (DES) effectively rendered it no longer applicable as a stated tank size in New Hampshire. They are currently being utilized as a pump station, holding tank, or to increase the capacity of an existing septic system, among other things.

Is it ideal for high water table properties?

A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the septic tank, rather than at the bottom. Mid-seam and monolithic types of 1000 gallon septic tanks are both available from Septic Tanks Direct.

How much does a 1000 gallon concrete septic tank weigh?

Answer:Our 1000 gallon tanks weigh around 8,600 lbs, although the weight of precast tanks varies significantly across manufacturers based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used in the construction.

How deep is a 1000 gallon septic tank?

Septic tanks made of concrete are generally 4′ 8″ deep and hold 1,000 gallons of water.

How many bedrooms does a 1000 gallon septic tank support?

Answer:In New Hampshire, the minimum need used to be many, then two, and currently a 1250 gallon septic tank is the bare essential.

In New Hampshire, a 1000-gallon tank is currently often utilized as a holding tank or pump station, or to increase the capacity of an existing septic system.

Can you drive over a 1000 gallon septic tank?

It is determined by the design rating. We make it in three different configurations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. H-20 is designed for drive-over traffic and burial depths up to 6 feet.

1000 Gallon Septic Tank Dimensions, Features/Details*

  • In two-bedroom installations, a 1000-gallon septic tank is utilized. This structure is frequently used as a pump station. For many years, the standard size in New Hampshire was the same as the standard size in Maine. This is the smallest size that may be used as a grease trap and is suggested for this application. It is shipped pre-assembled to make installation as simple as possible

* Standards for the state of New Hampshire are displayed; click here for information on other states’ specifications. You might also be interested in these widely used precast concrete septic tanks if you like what you see.

  • Septic Tanks: Precast Concrete Septic Tank – 1250 Gallons
  • Precast Concrete Septic Tank – 1250 Gallons Monolithic
  • Precast Concrete Septic Tank – 1500 Gallons Monolithic
  • Precast Concrete Septic Tank – 1600 Gallons
  • Precast Concrete Septic Tank – 1600 Gallons Monolithic
  • Precast Concrete Septic Tank – 2000 Gallons
  • Precast Concrete Septic Tank – 2000 Gallons Monolithic
  • Precast Concrete Septic Tank – 1025

a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.

What size is a 1000 gallon septic tank?

SteelSeptic TankTypicalDimensions
SteelSeptic Tank Size(GallonsCapacity) TankLength (Inches) TankDepth (Height) (Inches)
1000 58 96
1250 58 120
1500 58 144

ten thousand pounds Also Know how much a 1000-gallon septic tank will set you back? The average cost of a septic tank installation in the United States is $6,021, with the majority of homes spending between $3,102 and $9,441. For a typical 1,000-gallon tank, which would be utilized for a 3-bedroom home, the cost of installation can range from $2,100 to $5,000, not adding the cost of the tank itself, which is between $600 and $1,000. People sometimes inquire as to how they can identify the size of their septic tank.

The majority of home septic tanks are between 750 and 1,250 gallons in capacity.

I’m wondering how much a 1000-gallon concrete septic tank costs.

A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between $600 and $1,000.

1000 Gallon Plastic Septic Tank – 1 Compartment A-AST-1000-1

Part Number: A-AST-1000-1
Capacity: 1000 Gallons
Dimensions: 101″L x 60″W x 60″H
Availability: In Stock
Ships From: IA
*Stock subject to change. Please call to confirm.
Description:Ace Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail.
SKU A-AST-1000-1
Part Number A-AST-1000-1
Mfr. Part Number AST-1000-1
Capacity (Gallons) 1000
Dimensions 101″L x 60″W x 60″H
Weight (lbs) 441
Material Polyethylene
Manufacturer Ace Roto-Mold / Den-Hartog
Availability In Stock
Technical DrawingsGuides
Technical Drawings View Technical Drawing
Shipping From IA
Freight Class 300
Shipping Length 101
Shipping Width 60
Shipping Height 60
Shipping Weight (lbs) 441

Sizes of Septic Tanks & Shapes

Most septic tanks are built of fiberglass, plastic, or reinforced concrete, with certain exceptions. Metal tanks are also available, but because of their tendency to corrode quickly, they are not normally advised. Septic tanks are available in a variety of shapes, including rectangular, round, and oval, however the design of a septic tank does not normally alter its operation. When selecting a septic tank, the most critical consideration is ensuring that the tank is the appropriate size for your home’s needs.

Concrete Tank Construction

Concrete septic tanks are large and heavy, and their form is commonly rectangular. They’re often built in one of three ways: with a mid-seal, a top-seal, or a monolithic construction. Mid-seal tanks are made up of two sections that are bonded together with mastic sealant to form one unit.

A top-seal tank is a one-piece tank with a concrete cover that is attached to the tank. Monolithic cast tanks are constructed in a factory as a single unit, making them more waterproof than other forms of concrete tanks, but they are also more expensive than other types of concrete tanks.

Fiberglass and Plastic Tanks

In circular or capsule-like designs, fiberglass and plastic tanks have a nearly impenetrable waterproof seal and are therefore ideal for use in the marine environment. They are more expensive than concrete units, but because these tanks are formed as a single piece, there are no seams, the tanks are lightweight, and they are more resistant to impact cracks than concrete tanks, according to Atanis Water Tank Co., Ltd. Although they are more expensive than concrete units,

A Range of Tank Sizes

Septic tank capacities are measured in gallons, and are determined by the quantity of sewage that the tank can contain in total. It is necessary for septic tanks to store at least two days’ worth of sewage from your residence in order for the solids to be adequately separated from the liquids before the liquids are allowed to enter the absorption area. The size of the tank is determined by the number of bedrooms in your home. Standard tank sizes are generally 1,000, 1,250, and 1,500 gallons, and they are sufficient for the majority of residences in the United States.

A four-bedroom home requires a tank with a minimum liquid capacity of 1,250 gallons, while a five-bedroom residence requires a tank with a minimum liquid capacity of 1,500 gallons.

Estimating Your Needed Tank Size

The size of the tank is computed using a straightforward formula, while other considerations, such as the soil type, must be taken into consideration. Therefore, it is important to have a professional analyze the site and your property in order to decide the optimal size of tank for your needs and requirements. According to the University of Missouri Extension, to obtain a sense of the minimum size required for your home, multiply 150 gallons each bedroom by two, and then double the total by two to account for the 48-hour retention time required.

Assuming your property has more than six bedrooms, or five bedrooms plus a hot tub, you would multiply 150 times 6, and the resultant figure (900) would be increased by two to give you a minimum liquid capacity of 1,800 gallons.

Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


600 Gallon Single Septic Tank

Specifications:

  • Overall height is 62 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of outflow is 49 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC).

Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 68 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Single Septic Tank

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


25003500Gallon Single Septic Holding Tanks

Its overall height is 60 inches, its overall length is 150 inches, and its overall width is 67 inches; its height to the center line of the inlet is 52 inches, and its height to the center of the outlet is 49 inches; its weight is 11,700 pounds.

  • Overall height is 68 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 61 inches
  • Height to center line of outflow is 61 inches
  • Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

  • Overall height is 98 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 91 inches
  • Height to center line of exit is 91 inches
  • Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


Triple Compartment Septic Tanks

Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.


Chlorine Contact Tanks

Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File


Siphon Dose Tank Packages

Specifications:

  • It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of intake is 52 inches
  • Height to center line of exit is 52 inches
  • Weight is 13,000 pounds
  • Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

4’x10′ Septic Tank 1000 Gal.

Overview Septic tanks made of precast concrete are safe and dependable containment vaults that are used to naturally treat and separate wastewater. Tanks manufactured by Oldcastle Infrastructure are waterproof, suited for moderate and high traffic loading circumstances, and are ecologically conscious. These tanks, which come in a variety of conventional and configurable configurations, are the best alternative where municipal sewers are not an option. Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific demands and specifications.

  • The following terms are used in this document: Modular Construction, Base/Bottom Section, Lids/Top Sections, Body Slab and Risers, Rings/Cover, Embedded Lifters, Grade Rings and Risers, Knock-outs/Block-outs, Divider Walls.
  • Natural wastewater treatment and separation is made possible by the rugged durability of the system. Sectional design that may be customized
  • Installation is quick and simple. Design featuring distinct access points, block-outs, and knock-outs on each of the five sides
  • Base with four sides and an integral floor (body slab) as an alternative
  • The design of the panel part is optional. Various shapes and sizes are available. Covering and protecting
  • Accessibility for maintenance and inspection
  • Various shapes and sizes are available. Access openings of several sizes and locations are available
  • Customization to satisfy specific depth requirements
  • Various shapes and sizes are available. Various sizes are available. Cast or ductile iron covers for concrete manhole frames or concrete coverings for concrete manhole frames
  • Allow for simple installation
  • Material made of galvanized steel
  • 2, 4, 8, and 20-ton capacity loading capabilities. There are also one-ton universal lifters available. Covers for the access openings that are elevated above ground level
  • Available in both rectangular and circular configurations
  • Available in a variety of configurations to fit a wide range of inlet and output connection sizes and heights
  • Custom round or rectangular forms are available based on your design parameters. In order to get the correct fit, knock-outs may be readily shattered with a hammer. The customer is responsible for installing baffles and pipework. Baffles made of precast concrete are installed in the base portion. Create a barrier to slow down effuient and keep solids in place.

Location Available

Avon, Connecticut (151 Old Farms Road)

Quote Generator

Interested in receiving an estimate for your project? While exploring our items, click on “Add to Quote Generator” to receive a quick quote for everything you require in one place. We use cookies to provide you with a better browsing experience, to monitor site traffic, to customize content, and to supply you with more relevant adverts and information. You can find out more about how we use cookies and how you can manage them by reading our Cookie Policy. If you continue to use this site, you are indicating your acceptance of the usage of cookies.X

Custom Roto-Molding 1000 Gallon Rectangular Tank

CRMI-1000RT is the model number.

Custom Roto-Molding Inc. is the manufacturer. This is a Custom Roto-Molding 1000 Gallon Rectangular portable utility tank that was manufactured to order. Features:

  • Capacity: 1000 gallons
  • 8 gallons per minute “Lid
  • 16″ threaded lid with breather (optional)
  • 2″ female threaded outlet on longside or shortside
  • Produced from polyethylene that meets FDA requirements
  • It is also available in crosslinked polyethylene (please contact us for a price). Weight: 425 pounds
  • Dimensions: 96 inches long by 60 inches wide by 48 inches high “

Detailed Design of the Product 1000 Gallon Rectangular Tank Made to Order by Roto-Molding Warranty information provided by Custom Roto-Molding, Inc. A five-year warranty against defects in material and craftsmanship is provided by Custom Roto-Molding, Inc. on all tanks built by the company. Custom Roto-Molding tanks are manufactured in accordance with ASTM D-1998 specifications. Tanks that have been properly fitted and have not been subjected to abuse or misuse are covered under the warranty offered online.

  1. 1.It is the end user’s responsibility to execute initial cleaning, leak detection, and determination of the storage tank’s appropriateness for a given use.
  2. 2.All exterior piping must be supported by secondary supports and must not place an undue strain on the tank outputs.
  3. Lifting lugs should only be used when the tank is completely empty.
  4. In addition, the product warranty does not cover damage caused by mishandling or carelessness (including fire and accident), transportation damage, illegal changes to the device, significant external pressure, or abnormal usage.
  5. No cleaning or leak testing of the tanks and fittings has been performed.
  6. Before usage, fill the container with water and thoroughly clean it.

7.The manufacturer’s liability under this warranty and any other warranty, expressed or implied, statutory or otherwise, is limited to the repair or, at the Manufacturer’s option, replacement of any defective product that is shown to have been defective when shipped, and only if the manufacturer is notified in writing of the defects within the warranty period and the items in question are promptly delivered to the manufacturer’s point of manufacture.

8.

8.Upon reception, inspect the goods for any damage that may have occurred during shipping and handling, as well as the tank and fittings.

Dimension List – Arizona Precast Septic Concepts LLC

44 inches in length and 44 inches in width Height-4’4″ Approximately 39 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 37 inches.

ACTUAL SIZE

4’8″ in length, 4’8″ in width Height-4’9.5″ Approximately 45 inches from the bottom of the tank to the bottom of the stub out Outlet approximately 43 inches from the bottom of the tank to the bottom of the stub out

ACTUAL SIZE

Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’2′′ (bottom) and 4’9′′ (top) (top) Height-5’11” Approximately 54 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.

HOLE DIMENSIONS

11’7″ in length, 6’6″ in width

ACTUAL SIZE

Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’8″ (bottom) 4’9″ (top) (top) Height-6’1″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.

HOLE DIMENSIONS

11’5″ in length, 6’3″ in width

ACTUAL SIZE

9’8″ (bottom) and 10’5″ (top) in length (top) Width-6’6″ Height-6’3″ the length of the inlet pipe from the bottom of the tank to the bottom of the stub out Inlet-56 inches from the bottom of the tank to the bottom of the stub out.

HOLE DIMENSIONS

11’3″ in length, 7’10” in width

ACTUAL SIZE

The length is 12’10” and the width is 5’8″. 5’7.5″ in height is the maximum. Inlet – 55 inches, outlet – 52 inches

HOLE DIMENSIONS

14 feet in length 7.5 feet in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-5’11” It measures 55 inches from the bottom of the tank to the bottom of the stub out and 53 inches from that same bottom to the bottom of the stub out. Inlet: 55 inches from the bottom of the tank to the bottom of the stub out

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’6.5″ in length, 5’8″ in width, and 5’7.5″ in height Approximately 55 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.

HOLE DIMENSIONS

Length-16′ Width-7’6″

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-6’4″ From the bottom of the tank to the bottom of the stub out, the inlet is 60 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 58 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-6’10” From the bottom of the tank to the bottom of the stub out, the inlet is 66 inches. Outlet-64 inches from the bottom of the tank to the bottom of the stub out

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-7’5″ From the bottom of the tank to the bottom of the stub out, the inlet is 73 inches. from the bottom of the tank to the bottom of the stub out, outlet-71′′

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-9’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 93 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 91 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-10’7″ Inlet-111′′ measures the distance from the bottom of the tank to the bottom of the stub out. From the bottom of the tank to the bottom of the stub out, the outlet is 109 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width

ACTUAL SIZE

14’4″ in length, 6’6″ in width Height-11’1″ From the bottom of the tank to the bottom of the stub out, the inlet is 116 inches. From the bottom of the tank to the bottom of the stub out, the outlet is 114 inches.

HOLE DIMENSIONS

15’10” in length, 8’10” in width 15.5 inches in length, 11 inches in width, and 10.5 inches in height

Other sizesavailable upon request

8′′X8′′ taper to 6.75′′X6.75′′6′ long x 6′′ tall x 8.5′′ wide 8′′X8′′ taper to 6.75′′X6.75′′ 47 inches in length, 5 inches in height, and 9 inches in width

Other sizes made upon request

24 inches inside diameter, 34 inches outside diameter

What size of septic tank do I need?

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

  • Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

  • For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

  • Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
  • If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Here are some of the most frequently asked questions by our septic customers.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it.

The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

1000 Gallon Ace Two Compartment Septic Tank AST-1000-2

Part Number: A-AST-1000-2
Capacity: 1000 Gallons
Dimensions: 101″L x 60″W x 60″H
Shipping Dimensions: 101″L x 60″W x 60″H
Ships From: IA

Overview of the productDescription:

SKU A-AST-1000-2
Part Number A-AST-1000-2
Mfr. Part Number AST-1000-2
Capacity 1000 Gallons
Dimensions 101″L x 60″W x 60″H
Weight 493 lbs.
Manufacturer Ace / Den Hartog

Specifications

Technical DrawingsGuides
Technical Drawings View Technical Drawing

Shipping and Handling Information

Shipping From IA
Freight Class 300
Shipping Dimensions 101″L x 60″W x 60″H
Shipping Weight 493 lbs.

Plastic Septic Tanks – Two Compartments

Ace Septic TanksAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture.Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail.Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation.Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.Ace Septic / Cistern Tank AccessoriesRemember to order your state specific internal plumbing kit. Links:Septic Tank Product Description, Function and ServiceSeptic Tank Installation ProceduresSpherical Septic Tank Installation ProceduresSeptic Tank Divider Installation Procedures

Norwesco Septic Tanks300 + 500 Gallon Spheres may be used as Septic Holding Tanks (Pump Out).SeeUnderground Water Tanksfor others availablefor Septic Holding Tanks.The world’s leading manufacturer of polyethylene tanks, NORWESCO has been producing polyethylene septic tanks since 1980. With that kind of experience, NORWESCO offers you proven products that you can count on for years of dependable, trouble-free service.For septic system replacement and new home construction, NORWESCO‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any NORWESCO septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.All NORWESCO septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode and require no additional coatings as other tanks do. NORWESCO’s strict quality guidelines ensure an environmentally safe septic tank.NORWESCO septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 750, 1000, 1250 and 1500 gallon sizes are available in both one and two compartment configurations.NORWESCO septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank. It is far more cost-effective to utilize one of NORWESCO’s above ground tanks that are specifically designed for above ground use and applications.The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times.PRE-PLUMBING: All of our NORWESCO septic tanks that are 750 working gallons andabove are “pre-plumbed” with PVC inlet and outlet assemblies. Assemblies andtheir components are made of either SDR35 or SCH40 PVC depending on state orlocal code requirements. All assemblies are sized according to code requirementsas well. Finally, an EPDM gasket is placed between the “T” assembly and thetank wall to assure watertightness. NORWESCO septic tanks will arrive to youready for installation.WATERTIGHT DOMED LIDS: All septic tanks manufactured at all facilities, are equipped with a watertight domed lid. This domed lid is significantly stronger than previous lids we have offered. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. This gasket provides a watertight seal at the lid area.MANHOLE EXTENSIONS AND LID/RISER COMBINATIONS: Again, at all facilities, the notches in the manhole area(s) of the tank have been removed as the “interruption” in the manhole, or circle, weakens that area. The lugs on the accessories have also been removed. See tank accessories for more information on the accessory items.NORWESCO septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, NORWESCO septic tanks have been certified by both IAPMO and CSA.Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county or province.Click here for Septic Tanks in HawaiiTank Depot Tanks Light Weight – Durable – Easy to Install

1000 Gallon Septic Tanks

Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. If we had to pick a single hero from within your house, the septic tank would be a good choice because it is underrated. Your septic tank is the hero you’ve been looking for, working around the clock to keep waste products out of the system. The 1000 gallon (3684.5 L) septic tank system is one of the better options available among many different septic tank systems.

  1. Septic tanks with a capacity of 1000 gallons are an excellent choice for any little property.
  2. The typical cost of a 1000-gallon septic tank installation should range between $2200 and $5200 dollars.
  3. If you’re not sure if a septic tank system is perfect for you, let’s take a closer look at the product’s specifications.
  4. You should consider purchasing a 1000-gallon (3684.5 L) septic tank for the following reasons:

Before You Buy A Septic Tank

Historically, most septic tanks were just concrete boxes with a few holes in the bottom. These would then be buried in your backyard, where they would handle the transportation of your waste products. Sure, it wasn’t a very inexpensive installation, but it was an absolutely necessary component of your house. You can’t function properly without it. While these types of systems are found in the majority of older homes, most states have stricter rules in place. These restrictions will very certainly conflict with the ones that have been put in place at an older residence.

  1. Inspection of the septic system is the most effective technique to deal with it when purchasing a house that has one.
  2. This means that they must follow the correct processes and provide you with all of the information you require.
  3. If you are planning to establish a septic tank system or if you already have one, you should get the tanks examined.
  4. Please see this article for additional information on septic tank installation and costs.
  5. They would also need to look for the following things: needed outlet devices, filters, access ports, and the condition and fit of the lid (if applicable).
  6. It is OK to use documentation that is less than five years old when moving into a home with a septic tank.
  7. Evaluators would need to know the following information: location; kind of drainfield material; configuration; and size.

The height of the drainfield above the seasonal high water table will also be measured and evaluated. If your possible septic tank is equipped with accessories, those will also be subjected to examination.

What Are The Dimension of A 1000 Gallon Septic Tank?

The 1000 gallon (3684.5 L) septic tank is one of the most commonly used septic tank sizes on the market. It’s simple to obtain and install, but do you really need it? Is your house large enough to accept it? The manufacturer’s specifications for the 1000-gallon septic tank might influence the final size. Septic tanks will be available in a range of sizes, forms, and designs to suit your needs. Depending on the form, each one will have a distinct size and shape. The most typical size for concrete rectangular septic tanks is determined by whether the tank is heavy-duty or low-profile.

  • The septic tank is 120 inches in height, 67 inches in width, and 57 inches in depth.
  • It’s preferable to speak with a manufacturer about providing you with their size charts if you need precise measurements.
  • You’d also have to figure out how much material you’d need.
  • Steel septic tanks are built to an even more streamlined set of specifications.
  • It is necessary to perform a new calculation for each distinct shape of septic tank.
  • If you have a rectangle septic tank, multiply the length by the width and height in feet to get the total volume.
  • Multiplying the radius squared by 3.14 and then multiplying the result by the depth will get a rounded septic tank.
  • You should also inquire about the interior size of the septic tank from the manufacturer.
  • To determine the real capacity of the septic tank, however, you will need to know the interior measurements of the tank.

What Size Home Can A 1000 Gallon Septic Tanks Accommodate?

What size home do I need to fit a 1000 gallon septic tank now that you’ve learned about the different types? This particular feature might differ based on a number of circumstances. As a general rule, a 1000 gallon (3684.5 L) unit should be sufficient for a residence with less than 2500 square feet of space (232.25 sq. m). The 1000-gallon septic tank is required for dwellings with zero to three bedrooms, according to another method of calculation.

Why bedrooms matter?

The number of bedrooms is based on the assumption that all of them are occupied by persons sleeping in them. With a maximum of three bedrooms, you could accommodate anywhere from three to six people as inhabitants of the property. It goes without saying that if you live alone in a three-bedroom house, the computation is invalidated. Is there a more efficient method to perform the calculations? There is, and the overall amount of water used in your home serves as the foundation for it. If your daily water use is equal to or less than 550 gallons (2090 L), a 1000 gallon septic tank is the best option for you.

The computation of water usage takes into account all of the uses that you make of your water. Laundry, car washing, bathing, and toilet use are all examples of this type of usage. More information on how much of a septic tank you would require can be found here.

What’s The Cost of A 1000 Gallon Septic Tank Installation?

Do you know how much it would cost to install a 1000-gallon septic tank? This installation will be dependent on a number of criteria, the most important of which being the condition of the septic tank. A 1000-gallon septic tank will cost between $2200 and $5200, depending on the manufacturer. What is the cause of the significant range discrepancy? It is possible to save money up front or make an immediate investment in your septic tank, depending on the materials used. Pre-cast concrete septic tanks are the least expensive to construct, with construction costs ranging between $600 and $1000.

  1. It will cost around $2300 to install a fiberglass septic tank, which is more durable than a plastic tank.
  2. Anaerobic and aerobic septic tanks are the two most popular types of septic tanks.
  3. Because of the unique setup required for aerobic systems, they are more expensive to install than anaerobic systems.
  4. Starting with a simple drainfield with a conventional 36-inch (91.44 cm) broad gravel trench, most of the material required would be 12 inches (30.48 cm).
  5. On the basis of supplies alone, you should expect to pay between $15 and $30 per ton of gravel.
  6. Risers will add another $100 to $200 to the overall cost, depending on the material used.
  7. This amount does not include any necessary maintenance charges that will be incurred.
  8. Aerobic septic tanks would require frequent maintenance, with ATUs being the greatest financial burden across all systems.

Concrete Vs Plastic Septic Tanks: Which One Is Better?

Concretevs. Whether or whether plastic septic tanks are environmentally friendly has been a debate since their inception. Metals such as steel and fiberglass are also available, each with their own set of pros and disadvantages. Which one is more effective for you? Concrete septic tanks are extremely sturdy and may last for decades if they are installed correctly. Even if you utilize high-quality materials, fractures in concrete septic tanks are possible if the construction is substandard. These tanks are susceptible to cracking or separating at any time.

  • It might also be a concern if you are having a blockage.
  • Plastic, on the other hand, is extremely inexpensive and extremely resistant to rust, allowing the installation to survive for a significantly longer period of time.
  • Plastics are also susceptible to punctures, which might result in the failure of your septic tank.
  • If you are having a plastic septic tank installed, make sure to request special attention.
  • A well-executed installation may save you a significant amount of money.
  • Steel is considered to be the least attractive of all the available materials.
  • Steel septic tanks have a life expectancy of 20 to 25 years.
  • The last and most expensive substance is fiberglass, which is the most expensive of the group.
  • The key difference, though, is that the structure is far more durable.
  • The majority of fiberglass septic tanks are strong and long-lasting, but they can be difficult to operate with.

You must, however, pay close attention to the manner in which your contractor is installing it. You would also want to avoid putting anything heavy on top of the septic tank since it will not be long-lasting and will collapse.

Conclusion

When it comes to 1000 gallon septic tanks, it’s important to be well-informed before making a purchasing decision. Consider the problems you are now facing at home in order to determine what type of septic tank you require. 1000 gallon tanks are the most suitable for a modest household with 0 to 3 bedrooms and a living space of less than 2500 square feet (232.258 sq m). When choosing a septic tank, it is important to evaluate the materials used. Invest in high-quality materials and make certain that the design is appropriate for your home’s style.

Are you in the market for a septic tank?

Make use of the knowledge we provided and consult with a professional as well.

Leave a Comment

Your email address will not be published. Required fields are marked *