What Are Riser Lids On Septic Tank? (Correct answer)

A septic tank riser is a pipe made of either plastic, fiberglass, or concrete. It creates a vertical portal at the ground surface for easy access to the septic tank for inspection and pumping out. The lid is then either left exposed or with a very thin layer of soil and grass over it.

  • Septic tank lid is a cover used to close the top of the tank riser, and it measures five by eight feet. The cleanout company places it at the top of the riser, to locate the perimeter of the tank. For the older septic tanks, the lid measures 24 inches and placed at the center of the rectangle.

Why does my septic tank have 2 lids?

Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. This tank has a way in (inlet), and a way out (outlet). So, most residential tanks should have (2) lids about 5′ away from each other. A septic tank holds all the liquid waste from your home (toilets, sinks, kitchen, bathtubs, floor drains).

Does my septic need a riser?

Your septic system is one of the most important mechanical systems in your home. With a one-time installation fee, a septic tank riser will protect your septic system for years to come. The quick access for maintenance and pumping will almost immediately provide a return on your investment.

Are septic tank risers safe?

Fortunately, lids and risers in today’s onsite market can help prevent these unfortunate incidents. These innovative products ensure septic tank covers are secure and prohibit unauthorized tank access. Polyethylene septic tank covers from Hedstrom Plastics fit standard 18- and 24-inch double-wall corrugated pipe.

Should septic tank lid be sealed?

Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.

Do all septic tanks have lids?

Find the Lid. If your septic tank was installed after 1975, it will probably have two polyethylene or fiberglass lids centered at opposite sides of the perimeter. Older tanks will typically have a 24-inch concrete lid right in the center of the tank. Excavate in those locations to reveal the lids.

Should septic tank riser be above ground?

Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.

Can you cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

How do you seal a septic riser?

Seal the riser to the septic tank using the patch mix. You may finish sealing by adding Bentonite or casing sealer around the base, filling in gaps as needed. Make sure you then carefully secure the riser lid with the screws provided to avoid a safety hazard! All risers must be completely sealed to the septic tank.

Do septic tanks have concrete lids?

Septic systems are an inexpensive and frequently viable option for sewer systems. The most common tanks, starting in the 1940s, are concrete, with 3 – 500# lids for a 1000 gallon tank or 4 – 500# lids for a 1500 gallon tank.

How much does it cost to install risers on a septic?

Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

What are septic tank lids made of?

Septic tank lids are typically green or black plastic; sometimes they are made of concrete. It’s not always easy to find the lid, though, as unkempt grass, dirt, or debris can conceal the septic tank lid.

Septic Tank Risers & Lids

Sewage tank risers are meant to raise the access level of an underground septic tank to the surface, allowing for easier access for normal pumping and maintenance tasks. Riser installation in your septic tank eliminates the need for you to pay for a pumping service to dig up your tank or the need for you to do the digging yourself, saving you money. In addition to being strong enough for direct burial and foot traffic, our septic tank risers and lids are lightweight, which makes them easy to handle during the installation and removal of the tank lid.

We also sell septic covers for corrugated pipe in sizes such as 12″, 15″, 18″, 24″, and 30″.

Riser installation in your septic tank eliminates the need for you to pay for a pumping service to dig up your tank or the need for you to do the digging yourself, saving you money.

The Polylok risers and lids are available in three different diameters: 12″, 20″, and 24″.

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

In order to facilitate normal pumping and maintenance, septic tank risers are installed to raise the access level of a subterranean sewage tank above ground. Adding risers to your septic tank avoids the need for you to pay a pumping service to dig up your tank or the need for you to perform the digging yourself, saving you money. All of our septic tank risers and lids are manufactured of high density polyethylene plastic, which provides them the strength to withstand direct burial and foot traffic while still being lightweight to allow for simple handling during the installation and removal of the lid.

Riser and lid diameters of 12″, 20″, and 24″ are offered in the Polylok collection. Aside from that, we sell septic covers for corrugated pipe in sizes ranging from 12″ to 15″ in diameter to 18″ to 24″ and 30″.

In order to facilitate normal pumping and maintenance, septic tank risers are installed to raise the access level of a subterranean sewage tank above ground. Adding risers to your septic tank avoids the need for you to pay a pumping service to dig up your tank or the need for you to perform the digging yourself, saving you money. All of our septic tank risers and lids are manufactured of high density polyethylene plastic, which provides them the strength to withstand direct burial and foot traffic while still being lightweight to allow for simple handling during the installation and removal of the lid.

Aside from that, we sell septic covers for corrugated pipe in sizes ranging from 12″ to 15″ in diameter to 18″ to 24″ and 30″.

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! Other products need you to purchase or apply some other type of sealant between each riser part, however our Polylok risers eliminate the need for this step completely!

INTERNAL STRUCTURAL RIBS

The Polylok risers are reinforced with structural ribs that run internally around each riser segment, providing them with exceptional strength and allowing them to maintain their shape even after the hole is backfilled with dirt. As a result of the freezing and thawing of the ground in many parts of the country, it is necessary to have a smooth surface on the outside of the riser’s exterior. It is possible for items that have structural support on the outside of the riser to actually be lifted from the tank, causing damage to both the riser and seal, during periods of freezing and thawing.

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

LARGE TANK ADAPTER RING

An adapter ring is required in order to properly install septic tank risers on your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

Septic Tank Risers, Lids, and Covers

The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.

  1. Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
  2. ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.
  3. No.
  4. Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
  5. It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.
  6. IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
  7. If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
  8. Yes.

IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS? Yes. The Polylok Septic Tank Risers are assembled using stainless steel screws that allow them to be connected to one another. If you have any more queries, please contact us at 1-877-925-5132 or [email protected].

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

Pre-installed gaskets are included with every Polylok product, making it the only one on the market that does this. Because of this, there is no additional work needed to ensure that the riser system is airtight and watertight! This is critical in order to keep groundwater out of your tank, wastewater inside your tank, and potentially hazardous gases out of your yard! The majority of other solutions need you to purchase or apply some other type of sealant between each riser component, but with our Polylok septic tank risers, you won’t have to bother about that!

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

See also:  How Much Brine Hurts Septic Tank? (TOP 5 Tips)

LARGE TANK ADAPTER RING

It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

STAINLESS STEEL SCREWS INCLUDED

At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.

The benefits of septic tank risers

Installing septic tank access risers will save you money as well as your back. Accessing the septic tank is made simple by the use of rippers. | Photo courtesy of the Michigan State University College of Agriculture and Natural Resources The process of finding and pulling up the lid to your septic tank may be time-consuming and frustrating. In many cases, homeowners aren’t even sure where to begin their search for the lid to their septic tank. Some people are just unable to pull themselves out of a hole.

  1. What method do individuals use to locate the buried treasure that is their septic tank lid?
  2. Others look for a clue, such as a dead spot of grass or other visual signals, to help them find their way.
  3. Whatever way you choose, digging it out is still necessary, and if the correct location cannot be discovered, another hole must be excavated.
  4. Some counties, such as Kalamazoo, Oakland, and Otsego, mandate that septic tank access risers be erected; these are just a few examples.
  5. Contact your Michigan County to find out about the most recent onsite waste water rules that apply to you.
  6. A septic tank riser is a pipe that can be built of plastic, fiberglass, or concrete to carry waste away from the tank.
  7. The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.

It goes without saying that any modifications to your septic tank or system will need to be approved by your county environmental health department or another qualified inspector.

You may arrange the installation of a riser in your septic system to coincide with your usual septic system maintenance schedule.

It is also possible that having a riser in place will dramatically lower the overall cost of septic tank maintenance over time, owing to the increased ease of access and reduced time spent on the operation.

MSU Extension Educator Beth Clawson can provide further information on the onsite waste water systems you may be interested in.

The Michigan Department of Natural Resources has a team of natural resources educators working to provide aquatic invasive species instructional programming and support throughout the state.

You can reach out to an educator using MSU Extension’s ” Find an Expert ” search engine by searching for “Natural Resources Water Quality” in the keywords field. Resources:

Did you find this article to be informative?

You Might Also Be Interested In

Are you fed up with having to dig up your septic system every time it has to be repaired or serviced? If this describes you, we have a fantastic option for you. In order to modify the way you operate on your septic system, you may require a suitable septic riser, which can be found online.

Why choose Tuf Tite Risers?

The Tuf Tite Septic Riser System allows you to get access to your outside septic system in a quick and simple manner. With the help of this revolutionary instrument, septic system service becomes a snap, and you will never have to dig up your septic system again! This system eliminates any guessing by providing you with the riser and other components you require to complete the task. Because you are ordering all of the essential parts in a single package, you will save both time and money on the installation process.

What are the Tuf Tite Product Specs?

Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.

  • Septic tanks are normally installed below the surface of the earth.
  • Installing a riser kit is the most effective approach to deal with this issue.
  • When the riser comes into contact with the tank, an adapter ring should be used to seal the connection.
  • A number of risers will be stacked on top of each other and the adapter ring until they reach the ground level, at which point they will be removed.
  • This method will establish a barrier around the tank, protecting it from contamination while also making access to the tank more convenient.
  • In order to ensure that the circular riser will fit around your square or rectangular access port, there are a few things you may do.
  • The diagonal distance across the access will be the longest distance that a riser will have to cover before it may be used.
  • Assume that “a” is the length of one side of the port’s access.
  • For example, A is 12 inches in length and B is 12 inches in length.
  • The equations shown above can be used to estimate the diagonal distance of a rectangle in a rectangular coordinate system.
  • The only risers that should be utilized are those having an inner diameter that is bigger than the diagonal distance between the access port and the wall.

This approach will need the knowledge of the lengths of each side of your rectangular access port in order to work. Pythagorean theorem is something you may remember from your geometry training.

Best Price on Septic Tank Risers & Covers Online Guarenteed!

Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.

  1. Risers from Tuf-Tite and Polylok are available for purchase.
  2. Please keep in mind that Tuf-TitePolylok products are incompatible with one another.
  3. Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true.
  4. PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK

Tuf-Tite Septic Tank Riser, 24’x12′ – – Amazon.com

5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time!

Top reviews from the United States

On July 14, 2018, a reviewer in the United States of America verified that they had made the purchase. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time! 5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method.

  1. The photographs in this review The product was reviewed on December 30, 2017 in the United States and verified purchase This is an absolute must-have if you want to get to your septic tank quickly for maintenance.
  2. You’ll never have to dig yourself out of a hole again.
  3. Simple to set up.
  4. We eventually painted the lid a brownish color to match the surrounding landscape, which was an option.
  5. It was necessary to first install an adapter ring to the tank riser in order to adhere the risers to the septic tank, then an extra 24 x 6 riser to provide additional height, and lastly a 24 inch flat lid to complete the installation.
  6. Furthermore, if your septic system requires maintenance in the winter, there will be no digging in frozen earth.
  7. Made to be extremely durable.

On November 9, 2017, a review was published in the United States.

Fit well on a concrete septic tank and was simple to install.

While standing on top of the lid, the Putty Tape I used was strong enough to prevent it from bending or wobbling at all (210 ).

In my yard, I didn’t want a 24″ green lid protruding from the bushes.

The adapter ring and lid for the riser must be purchased separately from the riser.

I replaced the original concrete lids with a piece of plywood that was trimmed to fit and then sealed with Dicor self-leveling Lap Sealant to ensure that no toxic gas was trapped inside the risers.

On March 7, 2021, a review will be conducted in the United States.

The first one was excellent; it was a perfect fit for the flat lid and tank adapter ring (TAR).

Amazon issued a replacement, which arrived with the same oval watp as the original.

This lid will fit (barely), but I was unable to get the shape to fit into the TAR without the use of clamps (which do not fit into the hole when installing the risers) because of the form of the lid.

I like that Amazon makes it simple to exchange items, but yeesh.

Hopefully, the third replacement will be successful!

The two of them that I bought will be installed on my septic tank.

The second one arrived a few days later, but it was so deformed (it was in the shape of an oval) that it couldn’t be fitted into the TAR or lid.

I tested the riser with a tape measure and it measured more than 25 inches across at one point and less than 23 inches across the other axis.

In the image, you can see it after I used massive wood clamps to mold it into a spherical enough form to be placed on the TAR.

The lack of quality control and the oval forms of many risers have caused my project to be delayed by more than a week, according to my estimates.

The photographs in this review On June 16, 2021, a review was published in the United States of America.

It was quite difficult to put the cover back on.

To correct the oval problem, do the following: place the cover in place.

Fill the hole with earth, approximately 3″ deep all around, and pack it down with a 2×4 or something similar.

While it is being backfilled, the lid will keep it in place, and the soil (if correctly added slowly and packed evenly) will take care of the rest.

will assist in pushing them in a little further.

Purchased in the United States on April 28, 2016 and reviewed on April 29, 2016Verified Purchase With the Tuf-Tite flat lid and TAR adaptor ring, this worked perfectly.

See also:  What Is Safe For Pets & Septic Tank To Clean Toilet With? (Solved)

In six locations, I bolted the lid down with square head galvanized screws, then covered it with a few inches of dirt and grass.

5.0 stars out of 5 for this product Not too shabby for a piece of plastic.

In order to keep the adapter ring from moving about, I used cement sealing caulk on the bottom lip and then quick dry cement around the bottom edge.

It worked out well and was built to last.

It is a full system that works effortlessly when put together.

For the money, he’s a little bit of a jerk.

I had hoped to have everything delivered so that I wouldn’t have to travel to the store to finish things off, but that didn’t work out as planned.

I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed.

5.0 stars out of 5 for this product If you don’t enjoy digging, this is a must-have.

I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

Everything arrived in record time, and the installation was straightforward. If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed. It makes life a whole lot simpler. The photographs in this review

septic tank risers and lids

With the SubscribeSave discount, the price is $19.77. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SubscribeSave allows you to save even more money. SubscribeSave allows you to save even more money. Ships to the Netherlands are available. There are only 8 left in stock, so place your purchase now. Ships to the Netherlands are available. There are only 4 left in stock, so act quickly. Ships to the Netherlands are available. There are only 8 left in stock (more on the way).

  1. There are only 12 left in stock, so place your purchase now.
  2. This item is currently out of stock.
  3. There are only 12 left in stock, so place your purchase now.
  4. Ships to the NetherlandsThere are only 20 units remaining in stock (more on the way).
  5. There is just one left in stock, so act quickly.
  6. Only 9 of these items are left in stock – purchase soon.
  7. Typically, orders are shipped within 3 to 5 weeks.

At the time of purchase, a $5.00 coupon was added.

SubscribeSave allows you to save even more money.

There are only 8 left in stock, so place your purchase now.

Ships to the Netherlands Ships to the Netherlands are available.

The Netherlands is served by this item.

Ships to the Netherlands are available.

Ships to the Netherlands are available.

SubscribeSave allows you to save even more money.

With the coupon, you may save 6 percent.

How septic tank lids and covers are saving you money – Aeration Septic

Subscription Saver pricing of $19.77 At the time of purchase, a 5% discount is applied. With the coupon, you may save 5%. SubscribeSave helps you save even more money. SubscribeSave helps you save even more money. Netherlands is a destination for shipments Please place your purchase as soon as possible. Netherlands is a destination for shipments Please place your purchase as soon as possible. Netherlands is a destination for shipments The inventory is down to only 8 units left (more on the way).

  1. Netherlands is a destination for shipments There is a temporary shortage of inventory available for purchase.
  2. SubscribeSave helps you save even more money.
  3. Netherlands is a destination for shipments Order soon as there are just 1 left in stock.
  4. Netherlands is a destination for shipments In most cases, orders are delivered within 3 to 5 weeks.
  5. With this coupon, you may save $5.00.
  6. Netherlands is a destination for shipments Please place your purchase as soon as possible.
  7. Ships to the Netherlands Netherlands is a destination for shipments Please place your purchase as soon as possible as supplies are limited.
  8. Ships to the Netherlands Netherlands is a destination for shipments Please place your purchase as soon as possible since there are only 10 remaining!

Netherlands is a destination for shipments The stock is limited to 19 units, so act quickly! SubscribeSave helps you save even more money. At the time of purchase, a 6% discount is applied. With this discount, you may save 6%. Related brands to the one you were looking for

What are septic tank risers and lids?

With the SubscribeSave discount, the cost is $19.77. At the time of purchase, a 5 percent discount is applied. Take advantage of a 5 percent discount with this voucher. SubscriptionSave allows you to save even more money. SubscriptionSave allows you to save even more money. Shipments to the Netherlands There are only 8 left in stock, so act quickly. Shipments to the Netherlands There are only 4 left in stock, so place your purchase now. Shipments to the Netherlands There are only 8 items left in stock (more on the way).

  1. Shipments to the Netherlands This item is temporarily out of stock.
  2. SubscriptionSave allows you to save even more money.
  3. Shipments to the Netherlands There is just one remaining in stock, so place your purchase now.
  4. Shipments to the Netherlands Typically, orders are delivered within 3 to 5 weeks.
  5. A $5.00 discount was applied at the time of purchase.
  6. Shipments to the Netherlands There are only 8 left in stock, so act quickly.
  7. Shipments to the Netherlands There are only 5 left in stock, so act quickly.
  8. Shipments to the Netherlands There are only 10 left in stock, so place your purchase now.
  9. SubscriptionSave allows you to save even more money.
  10. With this voucher, you may save 6 percent.

There are several benefits to septic tank risers and lids

First and foremost, having a clearly visible septic tank lid on the property serves as a pleasant reminder that a septic system is in place. However, whereas older-style concrete coverings were considered to be heavy and unattractive, current plastic lids are lightweight and made to integrate with the surrounding environment. These lightweight variants make it simple and cost effective to install, monitor, and service your septic system, and they are also easy to transport. Savings on expenses By establishing an access point at ground level, service experts will have an easier time locating the septic system for routine maintenance, repairs, or to pump out the septic tank as necessary.

Stainless steel threaded fasteners are used to connect lids to the riser and keep them in place to avoid tampering by minors and potential falls into the septic tank.

The high duty riser and lid systems placed at ground level are sturdy enough to withstand being mowed directly over.

As a result, there is no need to spend the additional time and energy trimming around them.

At Aeration Septic Inc, we provide several different types and sizes of septic tank covers and lids. More information may be found by checking out our collection or by visiting our Amazon shop.

Installing Access Risers

In order to perform fundamental septic system maintenance, you must first evaluate the condition of your septic tank and pump chamber (if you have one), which can be time-consuming and labor-intensive if you do not have access ports known as risers. Consider the prospect of having to dig through two feet of dirt to check the oil on your vehicle. Installing septic tank risers for an off-site septic system is broken down into four steps, which are outlined below. Please keep in mind that the currentWashington State Coderequiresrisers for all septic systems, which means you may be forced to install one if you are asking for a construction permit, land division, or any other type of official action in the state.

A few safety tips before you get started:

  • Struck by an underground electrical wire while excavating may be quite dangerous! If you are in any way doubtful about the presence of subterranean lines on your property, you can have them found by contacting 1-800-424-5555 or 811, or by visiting the website
  • Use the buddy system to your advantage! Working with a partner is usually recommended since the fumes connected with open sewage can be dangerous and cause a person to go unconscious. Never leave a septic tank that is open unattended! Once the lids have been removed, exercise caution around the tank and keep dogs and children at a safe distance. Examine the structural integrity of your septic tank! If a septic tank is more than 20 years old, it is recommended that it be pumped to ensure that the tank’s structural integrity and water-tightness are not compromised. Instead of spending money on costly repairs, it is preferable to replace the tank with a contemporary septic tank that includes risers as part of the installation. A permit from your local Environmental Health department is required for the replacement of a septic tank.

Gather all the MaterialsTools You will Need

It should be possible to get most of the components required to construct a septic tank riser at your local plumbing hardware store or on the internet. PVC risers are available in a variety of shapes and sizes. Some of the brand names you might be familiar with include “Tuf-Tite,” “Polylok,” and “Orenco.” Risers are typically 24 inches in diameter and may be readily inserted into the tank hole opening without difficulty. Due to the fact that certain tanks have square openings, it might be difficult to fit a riser around the square entrance.

Some types of risers are made to order based on the height you want, while others are available in increments of 6-12 inches.

Then purchase an Adapter and Risers that are somewhat bigger in diameter than the hole.

See below for Step 4 on attaching risers to the tank entrance.

  1. Tank Adapter Ring (TAR)
  2. Riser Adapter Ring Kit
  3. Butyl Rope
  4. Risers
  5. Domed Lid OR Flat Lid
  6. Stainless Steel Screws

The following materials will be required for digging up your septic tank(s):

  1. As-built condition of the sewage treatment system The following items are required: sketch on paper, measuring tape, shovel, probing instrument, eye protection, and work gloves.

To cut risers to the proper size, the following tools are required:

  1. Circular saws, saber/jig saws, and hand saws
  2. Raspor file
  3. Marking pen
  4. Tape measure
  5. Drill with a 1/4″ bit

Circular saws, saber/jig saws, and hand saws are all available. Raspor file; Marking pen; Tape measure; Drill with a 1/4-inch bit

  1. High-strength concrete patch mix
  2. A small bucket
  3. A mixing stick
  4. And gloves

Follow the four simple procedures shown below to install access risers on your septic components, or download and print a copy of theSeptic Tank Manhole and Access Riser Installationbrochure from Thurston County Environmental Health to get started right now.

Step 1: LocateYour Septic Tank(s)

When looking for your underground septic tank or tanks, it is essential to consult the ‘As-built’ Record Drawing linked with your septic system for assistance. Essentially, this is a plot diagram that shows where your septic system was put on your property, as well as distances between septic components and notable landmarks. The Online Permit System will guide you through the process of locating septic-related documentation if you do not have a “as-built” document. It is possible that you may need to contact Environmental Health to examine the paper records or seek a specialist to find your tank if an as-built is not accessible.

Probing the area around the septic tank with the probing instrument until you contact concrete should be done lightly.

The presence of underground electricity or other utility lines and cables might put your septic tank in danger.

If you run into a power line, the consequences could be fatal. Call 1-800-424-5555 or 811 or go online to make sure that any electrical utilities are found before you begin digging before you begin digging.

Step 2: Uncover Your Septic Tank (s)

Once you’ve discovered your septic tank, you may start digging about. The tank is typically 6 feet wide by 8 feet long, with the width being the largest size. Remove all of the pebbles and debris from around the tank’s lid openings and dig out the whole top of the tank. You will want to clean out any dirt that has accumulated on the surface of your septic tank. This will assist you in ensuring that you generate a high-quality seal. You should have two openings: one over the inlet (which comes from the home) and another over the outlet (which comes from the yard) (into the drainfield or pump chamber).

  1. You’ll need a riser for each of the doors you open.
  2. Typically, the inlet side is the one that is nearest to the home.
  3. When cleaning the tank, it is beneficial to remove the complete top of the tank.
  4. Risers must be modified in order to be correctly installed, and all manholes (holes 24 inches or bigger in diameter or square in shape) must also be updated, as well as the tankinlet and outlet baffle covers (if separate from the manholes).
  5. If you discover one – and only one – riser already installed, it is most likely for the pump chamber, which only requires a single riser to provide access to the pump to function properly.
  6. Remove the concrete lids so that they may be disposed when the project is completed.
  7. Consult your’As-built’Recorddrawing to establish whether you have a distribution box (D-box), which you will also need to unearth and place a riser on if you have a typical gravity system.
  8. Once the lids have been removed, proceed with caution around the tank.
  9. Inform someone of your whereabouts in case you are involved in an accident.

You should be aware that exposure to sewage can result in serious sickness, so make sure you wear gloves and thoroughly wash your hands afterward with soap and water. It is also recommended that you wear eye protection in the event that debris falls into a tank and splashes back at you.

Step 3: Fit Risers to Component Openings

In accordance with the diameter of the septic tank manholes, huge risers will either sit on top of the septic tank or will fit down into the aperture of the tank by 1-3 inches. It’s important to keep this in mind while calculating the height of the riser. The surplus can be easily removed; nevertheless, it is difficult to add a few inches to the length. Take the following measurements of the manhole cover’s diameter:

  • Theriser will fit into the tank hole if the aperture is between 26 and 29 inches in diameter. Measure the distance from the ground to the top of the septic tank and multiply the measurement by three inches. The following is required if the aperture is greater than 29 inches: a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required. In this case, it lies above the manhole and narrows the aperture, allowing a 24-inch riser to be utilized instead of a more expensive 30-inch riser, saving money.
See also:  Why Would Septic Tank Liquid Level Be Above Normal? (Solved)

The distance between the ground and the top of the fiberglass plate should be measured. You may choose to place the risers so that they are level with the surface of the ground, or you may want them to stand out a few inches above the ground (if a riser is above ground make sure you are careful when mowing). Tips: To shorten a big riser with ribs, drill a 1/4-inch hole between the ribs above the cut line and finish the cut by following one of the grooves between the ribs with a saber/jig saw to finish the cut.

By eliminating one of the ribs from the largeriser, it may be made to fit more snugly into a smaller manhole entrance.

Step 4: Attach Risers toSeptic Tank (s)

It is recommended to pump out an old septic tank that is 20 years or older in order to check its structural integrity and water-tightness before using it again. If the tank requires extensive repairs, it is preferable to replace it with a new septic tank that includes risers as part of the installation. A permit from the local health department is required for the replacement of a septic tank. Remove any dirt and debris from the tank’s surface by cleaning it off. Using the butyl rope, construct the components of the risers in accordance with the manufacturer’s instructions.

  • Jet-Set, Rapid-Set, Thorough-Set, and Perco-Plug are just a few of the brand names available.
  • NOTE: For optimal results, just a little amount of concrete patch should be mixed at a time.
  • The patch mix should be used to seal the riser to the septic tank.
  • If you want to avoid a safety danger, make sure you properly attach theriser lid using the screws that come with it!
  • Risers for inlet or outlet apertures that are smaller than the openings should have the bottom few inches sanded with rough sandpaper to allow a firmer connection between the two surfaces.
  • A useful source of information on correct installation of risers on septic tanks may be found at your local hardware store where you purchased the risers and covers.

Thurston County Environmental Health is should be commended for providing the foundation for this documentation.

Septic Tanks – Traverse City, MI – Belanger Septic & Security Sanitation

Risers are used on septic tanks to raise the lid of the tank to a safe level. They assist to reduce the expense of pumping a septic tank by eliminating the need to identify and dig up lids on tanks, as well as safeguarding your irrigation and landscaping. Risers are simple to install and may be done by the homeowner, or we can do it for you. We are able to accept a wide range of lid designs. The majority of septic tank lids are circular, while some may be square depending on the manufacturer of your container.

We also provide several types of markers, such as stakes, imitation rocks, patio stones, and other similar items, to indicate the position of a septic tank.

Find the Right Size for Your Septic Tank

There are several various riser sizes available, ranging from six inches in diameter all the way up to thirty-six inches in diameter. In no case should a six-inch riser be installed on the first septic tank or the inlet end of a twin compartment septic tank. Solid sewage cannot be removed through a six-inch hole because of the size of the hole. When our professionals manipulate and break up the sewage, they do it with a paddle. Since there is no way to maneuver your hose around the tank to pump the corners, we end up simply pumping the water and leaving behind a significant amount of sediments that will end up remaining in the septic tank if we pump via a six-inch hole.

If your septic tank was originally placed with six-inch risers, it is recommended that you remove them and have the larger risers installed at your next pumping service appointment.

Septic Tank Safety: Risers & Lids Save Lives

BrenLin Company manufactures Seal-r septic tank covers.

Interested in Accessories?

Receive articles, stories, and videos about Accessories sent directly to your email! Now is the time to sign up. Accessories+ Receive Notifications Earlier this month, two good Samaritans came to the aid of a 2-year-old kid who had fallen into a mobile home park sewage tank near Kissimmee, Florida. The youngster had been trapped in the tank for more than an hour when he was rescued. As reported by WFTV.com, the youngster and other prospective victims were exposed to the sewage tank because the lid had not been securely fastened to the tank.

  1. Rafael administered CPR to the youngster, who was subsequently transported to a nearby hospital, where he was examined and released.
  2. Although this tale has a good conclusion, many comparable occurrences involving toddlers who fall into unprotected sewage tanks result in tragic outcomes.
  3. These ground-breaking solutions guarantee that septic tank lids are properly secured and that unlawful tank access is prevented.
  4. The company’s job to ensure that the product is as safe as feasible as a manufacturer of septic system accessories and equipment.
  5. There is also a riser safety screen protection device for use on PVC ribbed pipe, HDPE corrugated pipe, and concrete septic tank risers, which is available from the manufacturer.
  6. The heavy-duty ABS safety screens, which are bright yellow in color, are available in three different sizes: 12, 20 and 24 inches.
  7. There are gaskets and safety hardware incorporated, as well as a safety net option available.

On request, foam-filled lids may be made, and coverings can be made to fit specific needs.

They are available in polyethylene and PVC materials in diameters ranging from 22 inches to 36 inches in 22-, 24-, 26-, 30-, and 36-inch sizes.

The interlocking design of the rims and lids is made possible by a neoprene gasket and a twist lock mechanism.

The ledges will be used to hold the company’s plastic interior safety lids as well as a number of other internal safety devices, such as concrete, fiberglass, or rope netting, manufactured by third parties.

Locking riser lids from Sim/Tech Filter are primarily intended for use on systems that get a lot of traffic.

The web locks and keeps the lid in place in the same action as the web locks and retains the lid.

Seal-r septic tank covers are available from the BrenLin Company.

Increasing need for larger risers to handle modern technological equipment has resulted in the 42-inch lid being introduced.

PVC and HDPE pipe are accommodated with a flat-style lip.

Installing it flush to the ground is made possible by its design, which includes a cored centering ring that helps to line and fit the lid securely to the riser.

is comprised of rotomolded plastic and has a weight rating of 3,500 pounds.

The lid is made of noncorrosive material and can resist a wheel weight of 2,500 pounds. The waterproof and gastight seal provided by the built-in lid gasket is quite effective. Visit for a comprehensive listing of products as well as contact information for the manufacturers.

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.

Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.

The installation of a septic tank riser is a cost-effective solution to this issue.

The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.

  • Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
  • And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?

Leave a Comment

Your email address will not be published. Required fields are marked *