Septic Tanks Why Won'T They Pump Second Tank? (TOP 5 Tips)

The problem with septic systems is that the small round stones and soil around the perforated, underground pipes in the leaching bed eventually stop allowing liquid to flow through it. Failure to pump out your septic tank every two or three years is one reason this might happen sooner than it should.

Should both chambers of a septic tank be pumped?

Septic tanks installed after the late 1980s have two compartments, and it is important to pump out both compartments each time. Most homeowners are unaware when their septic tank has two compartments; some companies use that to their advantage, charging to pump both sides of the tank but only actually pumping out one.

How does a 2 tank septic system work?

Septic tanks work by allowing waste to separate into three layers: solids, effluent and scum (see illustration above). The solids settle to the bottom, where microorganisms decompose them. The middle layer of effluent exits the tank and travels through underground perforated pipes into the drainage field.

Why does my septic system have two tanks?

Unlike a regular septic system, the two tanks on the dual septic system are used to separately store blackwater and greywater. Blackwater entails things such as urine, fecal matter, and flush water. Alternatively, greywater is the much less pathogenic liquid coming from showers, sinks, and washing machines.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

Pooling water.
Slow drains.
Odours.

An overly healthy lawn.
Sewer backup.
Gurgling Pipes.

Trouble Flushing.

What to do after septic tank is pumped out?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

1) Get on a Schedule.

2) Take Care of the System.
3) Know the Parts of Your System.
4) Check Other Possible Issues.

Should bath water go into septic tank?

In MOST household septic systems, yes. Probably 98%+ of septic systems receive all of the waste water from the house – tub, shower, sinks, washing machine, dishwasher, etc.

How often should a septic tank be pumped?

Inspect and Pump Frequently Household septic tanks are typically pumped every three to five years.

Do all septic tanks have two compartments?

Most septic tanks have one or two compartments. Two compartment tanks, or two single compartment tanks in series, provide better settling of the solids. Each septic tank has an inspection port over each baffle as well as a manhole access port. The manhole lid needs to be accessed for the tank to be pumped.

How do I connect two septic tanks together?

Use a 4-inch pipe to connect the two septic tanks. Place this pipe into the inlet hole of your new septic tank before you lower it into the ground. After you’ve lowered your new septic tank, insert the other end of the pipe into your old septic tank’s outlet hole.

How many chambers should a septic tank have?

New tanks must have two chambers, while older tanks may have only one. The tank is often made from concrete, but other materials are also used. The tank works by settling and microbial digestion of waste.

What is leaching chamber?

A leaching chamber is a wastewater treatment system consisting of trenches or beds, together with one or more distribution pipes or open-bottomed plastic chambers, installed in appropriate soils. A small portion of the effluent is used by plants through their roots or evaporates from the soil.

How many chambers are there in a septic tank?

Today, the design of the tank usually incorporates two chambers, each equipped with an access opening and cover, and separated by a dividing wall with openings located about midway between the floor and roof of the tank. Wastewater enters the first chamber of the tank, allowing solids to settle and scum to float.

WORRIED ABOUT YOUR SEPTIC SYSTEM? Learn to Fix It Yourself & Stop Worrying

Septic tanks may be present on the property if you’ve recently purchased an older house. This is true even if your home is currently linked to the municipal water and wastewater system. It’s possible that a prior owner abandoned the ancient septic system and connected to the city sewer system when it became accessible at some time in the past. Despite the fact that there are standards in place now for properly leaving a septic tank, it was formerly normal practice to simply leave the tanks in place and forget about them years ago.

The old tank may either be demolished or filled with water as a solution.

You may be required to get permits and undergo inspections.

They are dangerous because curious children may attempt to pry open the lid and fall within.

It is possible to die by falling into a septic tank because of the poisonous nature of its contents and because of the possibility that concrete will fall on you.

Eventually, this approach was phased out due to the fact that the steel would corrode and leave the tank liable to collapse.
Septic tanks that are more than 20 years old are like miniature caves that might collapse at any time.
Crushed and buried or removed, depending on the situation, the old tank If you have an outdated septic tank, your contractor will determine the most efficient approach to remove it.

Alternatively, if the tank is built of concrete, the bottom or sides may be broken apart so that the tank can no longer retain water, and the tank can then be filled with sand, gravel, or some other sort of rubble and buried beneath the ground.
There are two options for removing tanks: either they are totally removed or destroyed and buried in place.
Documentation and mapping of the abandonment Because they are underground, septic tanks can be difficult to locate even when they are presently in use.

Those who purchase the property in the future will be completely unaware of its presence.
In addition, your city or county will have the permit and inspection records that indicate the job was done in accordance with code requirements.
Please keep in mind that septic systems are not designed to survive forever, and it is probable that you have more than one abandoned tank on your property.

Upon discovering an old septic tank on your property that is no longer in use, contact Total Enviro Services for propertank abandonment methods that meet with local standards and protect your family, pets, and farm animals safe from harm or death throughout the process.

A Bad Day for My Septic System

On the 17th of June, 2011, the septic system time bomb exploded at my residence. As you can see in the photo above, the sewage had risen far past the top of the tank due to the removal of the primary access door. The problem is, the solution I came up with for getting my system back up and running turned out to be far less expensive, simpler, and less disruptive than I had anticipated. As of March 2021, my system is still operational and doing properly. In fact, it’s in like-new condition. So far as I’m aware, the longest operating life of a septic system has been reported to be 39 years.

Mine finally gave up the ghost (literally) after 22 years of service, but since I entirely resurrected it, we’re currently in our 31st year of operation.

Despite the fact that the specifics will not be pleasant to read, this information is extremely important if you have a septic system in your home or business.

To get a video tour of how septic systems function, please click here.

How Septic Systems Work

The foundation of a typical septic system is an underground tank that is divided in half. Raw sewage is introduced into the tank through the first half of the tank’s opening. The process of digestion begins here, allowing the majority of the solids to be liquefied. In this first half of the tank, the indigestible materials settle to the bottom of the tank. The liquid effluent travels to the second half of the tank, where it undergoes additional digestion before being discharged through perforated pipes buried below the soil level downstream of the tank.

Grass and other green plants’ roots are said to be responsible for 90 percent of waste water filtration, and I’m inclined to believe them.

That is, until the weeping bed ceases to function properly, of course.
Failure to pump out your septic tank every two or three years is one of the reasons why this may occur sooner than it should have done so.
The accumulation of laundry lint can also cause issues in some situations, but so can the normal, everyday use of your septic system.

The consequences of a clogged septic system are the same regardless of the reason.
At least, that’s what occurred at my apartment back in 2011.
I first became aware of an issue when I removed the lids from the pressure-treated wooden boxes I’d constructed over my septic tank to make access to it for pump outs more convenient.

Then I noticed 12 inches of sewage resting on top of the concrete septic tank, which I thought was strange.

I was right to be worried.

Even without considering the additional inspection and certification requirements that some jurisdictions place on homeowners who install new septic systems, a new septic system can easily cost ten thousand dollars or more to install.

This type of risk inspired me to try my hand at something I saw on the internet and found to be profitable.

I was aware that there were alternatives to a total weeping bed rebuild, and I hoped to come across one that seemed promising enough to give it a shot.

It was more than $400, yet it didn’t provide any long-term advantages for me.

SeptemberCleanse is the name of the product I purchased, and it’s promoted as being made from an exclusive bacterial culture that’s been particularly engineered to devour the unpleasant, slimy material that prevents weeping beds from operating.

That’s the theory, at least.

When I purchased SeptiCleanse, I was made to assume that it came with a money-back guarantee.

In actuality, however, this was not true.

There is no money, only more powder.

That didn’t work either, and I still didn’t get a refund from the company.

On the cover of my video course on maintaining and reviving your septic system, I explain how to avoid the need for costly and disruptive septic system replacement.

It’s been years since I got everything operating properly after stumbling about and attempting in vain to fix my broken system.

Without a doubt, I am overjoyed (and quite a bit better off financially).

This type of leaching bed maintenance, I feel, is critical and may be applied to a wide range of systems.

But it’s all right. A retrofit of this nature may be performed by any handy homeowner who wishes to prevent the type of septic system failure that is generally unavoidable. Click here to read about the technique I devised that has been completely successful for me since June 2014.

3 THINGS TO KNOW ABOUT SEPTIC TANK BAFFLES

By Admin on November 12, 2020 Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your list of accomplishments. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably practicable. Fortunately, there are a number of modest improvements you can do immediately to make your septic system even more ecologically friendly than it already is.

Have your septic tank inspected and pumped on a regular basis.

A bigger septic tank with only a couple of people living in your house, for example, will not require pumping as frequently as a smaller septic tank or as a septic tank that must manage the waste products of multiple family members will require.
When in doubt about how often to pump your septic tank, consult with a professional for advice.
In addition to locating and repairing any damage, a professional can ensure that the septic field is in good working order and that your septic tank is functional, large enough to handle your family’s waste, and not causing any unwanted pollution in nearby ground water.

Avoid flushing non-biodegradable items down the toilet or down the toilet.
Items that are not biodegradable are unable to properly decompose in the septic tank and might cause the system to get clogged.
In addition to causing issues in your house, septic system backups can damage ground water in the area surrounding your septic field.

Towels made of paper Products for feminine hygiene Grease or fats are used in cooking.

grinds from a cup of coffee Even if you have a trash disposal, the food scraps that you flush down the drain and bring into your septic system may cause unanticipated harm to your plumbing system.

Food scraps can enhance the amounts of nitrogen and phosphorus in the wastewater, which can disturb the natural bacterial balance of the septic tank, among other things.

Water conservation should be practiced.

Exceedingly large amounts of water use will interfere with the normal flow of wastewater from your home into your septic tank.

Limiting the amount of time you spend in the shower and turning off the faucet while brushing your teeth, as well as purchasing a smaller dishwasher and washing machine that use less water, are all simple strategies to reduce water use in your home.

The following are some basic steps you can take to make your septic system more ecologically friendly: save water, maintain your septic system and tank, and recycle wastewater. To get answers to any of your septic tank-related issues, get in touch with the experts at Upstate Septic Tank, LLC.

Four Common Reasons Why Septic Tanks Fail

The septic tank in your home is the most crucial portion of your plumbing system if your home is not linked to city sewers. Septic tanks are responsible for the proper treatment of all of the wastewater that you generate at your home. Your septic system becomes ineffective when it is unable to properly dispose of all of the wastewater generated in your house. That implies it will return to you untreated and in a dangerous state. Septic tank failure is a very significant (and frequently extremely expensive) problem that affects thousands of people every year.

Fortunately, if you take care to prevent the following issues, you won’t have to worry about it!

Lack of Maintenance

In order for your septic system to function, all of the wastewater you generate must be sent into the septic tank. Heavy pollutants separate from the water and sink to the bottom of the tank, where they are known as sludge. Light contaminants, such as oil and grease, float to the surface of wastewater and form scum on the surface. It is only after the sludge and scum have been separated that the water is discharged into the drainfield by the septic tank. The scum and sludge remain contained within the tank, preventing them from contaminating groundwater.

Pumping out your septic tank at least once every three years is necessary to eliminate built-up sludge and scum from the system.

Eventually, they will take up too much space and may even begin to flow into the soil along with the processed water, causing flooding.

Excessive Water Use

It is the restricted capacity of septic tanks that is their most significant drawback. A septic tank is only capable of processing a particular amount of wastewater at a given point in time. Your house’s septic tank was built to manage a specified flow rate of water, which was determined by the size of your home. Generally speaking, your septic tank should release wastewater at a pace that is equal to or greater than the rate at which it takes in water. When it needs to take on an excessive amount of water, it is unable to do so, and you have a problem.

Because the surplus water cannot be absorbed by the full tank, it must be disposed of in another manner.

This is mainly due to the fact that your septic tank is either either small or too large for your requirements. It’s also conceivable that drainage or runoff from the outside of the house entered the septic tank and overwhelmed the system.

Damage

A number of factors can cause substantial harm to a septic system. Four major components make up a septic system: the pipe that connects your home to the tank, the tank itself, the drainfield, and the soil surrounding the tank. If something happens to any of these four components, the septic system may become inoperable. The septic system is affected in a variety of ways by different types of damage. Most of the time, a small amount of harm that appears to be trivial eventually develops into something more serious.

On rare occasions, tree roots will penetrate the septic system and cause it to malfunction.

In addition to blocking drain lines, roots may cause damage to the pipe and tank as well as clog them.

You should try to prevent straining the drainfield surrounding your septic system if at all feasible.

Improper Installation

Even if your tank is the correct size, it will not function effectively if it has not been properly fitted. To be effective, septic systems must be placed at an exact depth in a certain kind of soil. To be honest, your drainfield’s soil composition is one of the most significant components of the overall system. It is in charge of absorbing, processing, and finally distributing wastewater in an environmentally friendly manner. If the soil in your drainfield is not suitable for septic usage, it will be unable to perform its function correctly.

The result will be that sewage will reach groundwater while it is still tainted.
The same care must be used with the installation of every other component of the system.

You should hire a professional to inspect your septic system if you are concerned that it was not installed properly.
Our technicians can evaluate your system, detect any issues that may arise, and then resolve them as fast and effectively as possible.

Septic has been pumped twice in last 1.5 months

Sorry. I didn’t realize this forum existed until after I made a post in Home Disasters. As a result, the identical post is repeated here. This is our first property with a septic system, and we’re already experiencing some difficulties. As a result, I’m asking for some ideas or comments on what could be causing the problem. We’ve been in the house for nearly 6 years and have had no difficulties until lately, when the rain came down in torrents. The home was constructed in 1969, and the septic system is considered to be “original.” Due to the fact that the toilets stopped flushing and all of the drains stopped working, we’ve had to have it pumped twice in the last 45 days ($150×2=$300!) Every time we remove the lid from the tank, it is totally filled with water, and we have to contact the septic company to come pump it out.

Not a trickle, but more like the nozzle of a lawn hose blasting at full bore.

Why would we require new lines if the water is already flowing again?

Also, in the last year, we’ve noticed foul odors emanating from our kitchen sink, as well as a rotten egg stench emanating from the washing machine’s drain.

I’m aware that a new p-trap has been installed on the kitchen sink; thus, why/how may scents be emanating from the septic system? Is this a harbinger of something more sinister? Thank you in advance for your consideration. In the month of April in Owasso, Oklahoma

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

A layer of sludge settles to the bottom of the container.
4.
Scum is mostly constituted of fats, greases, and oils, among other substances.

Grease and oils float to the surface of the water.
(5) A filter stops the majority of particles from reaching the exit pipe.
The effluent is discharged into the drain field.

Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Garbage that decomposes slowly (or not at all) is flushed down the toilet. Troublesome substances such as cigarette butts, diapers, and coffee grounds are frequently seen. Solid waste disposal systems, when utilized often, have the potential to overflow their capacity. In the washing machine, lint made of synthetic fibers floats. This substance is not degraded by bacteria in the tank or drain septic field. Disinfecting cleansers and antibacterial soaps are examples of household chemicals that destroy bacteria.

It is impossible to fill the tank with enough wastewater in a short amount of time without overflowing the tank.
Sludge that has accumulated in the drain field might overflow as well.
Branches and bushes’ roots can obstruct and cause harm to a drainage field.

Most of the time, this is caused by automobiles driving or parking in the drain field.

…but don’t hire a pumper until you need it

Drains are used to flush waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all common sources of irritation. Garbage disposers, when utilized excessively, can introduce an excessive amount of solid waste into the system. During the washing process, synthetic fiber lint is released. Bacteria in the tank and drain septic field are unable to degrade it; Bacteria are killed by household chemicals such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, however the less you use them, the better; A large amount of wastewater discharged in a short period of time causes the tank to empty too quickly.

Sludge that has accumulated in the drain field can also overflow into the drain field.

Because compacted soil and gravel prevent effluent seepage and deprive microorganisms of oxygen, they are considered to be environmentally harmful.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank.

(It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

Keep the effluent filter in place since it is required by your state’s health law.

Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
Your filter, on the other hand, should not require cleaning every six months.
A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.

A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.
More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

You may be able to boost the performance of your system by using a product such as RID-X to introduce bacteria into the system. As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

Inspect and pump your drainfield on a regular basis
Conserve water

Dispose of waste properly
And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

The size of the household
The total amount of wastewater produced
The amount of solids present in wastewater

The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

If additional repairs are recommended, contact a repair professional as soon as possible. An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

Cooking grease or oil
Wipes that are not flushable, such as baby wipes or other wet wipes
Photographic solutions
Feminine hygiene items Condoms
Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.

Why Your Septic Tank Looks Full After Pumping – Septic Maxx

Septic tanks must be pumped on a regular basis in order to maintain an effective and healthy system. You’ve probably peered inside your tank after it’s been pumped and wondered why the water level is still so high. When you see a high water level, it might be alarming, especially if you are not familiar with what happens throughout the pumping process. What you need to know about your septic tank is outlined here.

Water is Necessary

An effective and healthy septic system is dependent on the frequent pumping of its tanks. You’ve probably peered inside your tank after it’s been pumped and puzzled why the water level was still so high. Being alarmed by a high water level is understandable, especially if you are not familiar with what takes on throughout the pumping process. What you need to know about your septic tank is outlined in the following section:

What Can Cause Your Septic Tank to Overfill

There might be a variety of factors contributing to your septic tank being overfilled. The presence of an overfilled septic tank is frequently a symptom that your drain field is not operating properly. The drain field is the final fixture in the septic system, and it is responsible for returning treated wastewater to the surrounding soil. When your drain field floods, the water flow becomes obstructed, causing the water level in your septic tank to increase significantly. Plumbing problems and excessive water use are two more prevalent problems.

Excessive water use might cause the septic tank to fill with more contents than it is capable of handling, resulting in a high water level.

Septic Maxx provides high-quality solutions that effectively tackle the problems that afflict septic tanks.

Our environmentally friendly premium products are biodegradable and may be used to clean your septic tank of unwanted build-up by simply flushing them down the toilet that is the furthest away from your septic tank. Get in touch with us to talk with a septic specialist right now.

How Often Should a Septic Tank Be Pumped?

It’s a subject that comes up time and time again: how frequently should a septic tank be pumped? In my role as co-owner of Western SepticExcavation, a firm that pumps sewage tanks, I and my partners get asked this question on a weekly basis. The short answer is that no one is sure. I’m curious how we, as professionals tasked with the important responsibility of safely disposing of wastewater from rural houses and businesses, came to learn about this intriguing piece of information. Please bear with me as I explain.

Starting with a simple question that many individuals are unable to answer, let’s go on.

Why do I need to pump my septic tank?

Old-school thinkers frequently assert that a septic tank does not require pumping if it is operating properly. Ever. Providing that we also infer that very few, if any, septic tanks function “properly,” we may make the assumption that this is valid. While theoretically conceivable, achieving this degree of septic nirvana in real life is very hard to achieve. To avoid the hassle of going around in circles, it is much simpler to accept the overwhelming facts and come to the conclusion that septic tanks must be pumped on a regular basis in order to extend the life of the system.

As a result, it must be preserved.
Second, it serves to store substances that have not been digested in order to be removed later by pumping.
This is due to the fact that solids degrade at different rates in different environments.
Fats, oils, and greases float on top of the liquid in the tank, forming a layer of solids known as scum, which is lighter than water and hence floats on top of the liquid.
Without a doubt, when you utter the word “septic sludge,” everyone’s mind immediately goes to the ickiest of the ickies, but trust me when I say there’s a lot more to it than that.
How does this play out in the event that I fail to pump out my septic tank?
As a result, the tank’s practical holding capacity is reduced by a factor of several hundred percent.

In a two-pronged attack on your drain field, this reduces the amount of time the bacteria have to digest particles while simultaneously decreasing the amount of time the undigested solids have to divide into their respective layers.

Once at the wastewater treatment plant, these sediments settle out of the wastewater, blocking pipes and forming a thick layer of sludge, known as a biomat, which decreases the capacity of the water to seep into the ground.

Yet another typical problem that arises as a result of inadequate septic pumping is that the floating scum layer becomes too thick and actually obstructs the line that leads to the septic tank, creating an obstruction that results in sewer backup into the residence.

Is it clear enough?

Usually, within a week of pumping, the tank will be completely filled with liquid waste.

Our concern is with the solids that have settled to the bottom and have risen to the surface of the water column.

If a pumper ever states that the tank is “full,” he is most likely referring to a solids accumulation that necessitates the need to pump the tank as soon as possible. Now that we’ve covered the reasons for why I need to pump my septic tank, let’s move on to the next step.

How often do you recommend I pump my septic tank?

The guidelines of the Health District are always the first thing I point people to when they ask me a question like this. Their recommendations, which are supported by the Department of Environmental Quality and the Environmental Protection Agency, are to use one of two ways to decide when and how often to pump a septic tank. According to the first technique, the thickness of the scum and sludge layers must be measured, and a pump must be placed in the tank when the volume of solids in the tank surpasses around 25 percent to 35 percent of the total volume of the tank.

If a sample tool is not available, there are other options for measuring scum and sludge, including the use of a handmade instrument.
However, even when done with adequate equipment, septic tank sampling is an imprecise science that can lead to incorrect conclusions.
However, in practice, this is not the case.
There is a broad range of precision in the sample used to determine the volume of solids, depending on where it is collected (for example, at the inlet, center, or outflow end of the tank), and this accuracy will vary depending on where it is taken.
Many of these older tanks, as well as some current tanks, have the primary access lid located in the center of the tank or even at the outlet end of the tank, which is a common practice.
The scum layer will occasionally be quite thick at the input end of the tank and nearly non-existent at the output end, depending on the conditions.
The collection of scum around the entrance will become a problem long before the amount of settled solids exceeds the acceptable volume of 25 percent to 35 percent, which would necessitate the pumping of the tank under those circumstances.

In order to identify when to pump my septic tank, the second way that has been advocated is to set up a regular plan for pumping that is based on calendar years.

Even this advice, on the other hand, is highly subjective.

People’s behaviors differ significantly from one household to the next.

Cooking oils enter the septic system through dishwashing and bodily wastes, and they contaminate the water supply.

Septic tank bacterial populations have been shown to be negatively affected by the fragrances and colors contained inside these items.

A gourmand who adores baking frequently mistakenly flushes a large amount of oil down the toilet.

Every batch of chocolate chip cookies was baked in a pan that had been greased with shortening before being placed in the oven.

Germs and viruses are a source of great anxiety for some individuals.

Chemicals such as antibacterial agents and disinfectants are toxic to the bacteria in the septic system.

Residents who use recreational drugs have been known to cause damage to septic systems in rare instances.

As a result, some homes will produce solid waste at a significantly higher pace than others, while having the same number of people and living in an apparently identical environment.

Then there’s the issue of water use. In contrast, a struggling family of six may be sharing a small home that should only handle three or four people, but a moderately rich elderly grandma may live alone in a huge home with a septic system that is meant to accommodate six people. It is unlikely that a family of the same size with very young children will consume nearly as much water as a family of the same size whose children are teens in high school, involved in sports, and who wash two or three times each day.

Because of the numerous variables that might effect a septic system, it is practically hard to get a definitive conclusion on how frequently I should pump my septic tank, as seen above.
I’ll use myself as an illustration.
Even though I had finally made up my mind to pump it, I had no idea what the solids buildup would look like until I actually opened the top.
We’ve encountered septic tanks that had accumulated a significant amount of particles only a few months after being pumped, and on another occasion, I pumped a tank for an old gentleman who hadn’t had his tank pumped in more than 15 years.
There were hardly no solids in it at all, which was surprising.
In order to identify when to pump my septic tank, the second way that has been advocated is to set up a regular plan for pumping that is based on calendar years.
Even this advice, on the other hand, is highly subjective.