How To Prevent Roots In Septic Tank? (Best solution)

Copper Sulfate Copper sulfate is effective at killing roots growing in drain fields and septic tanks. Not only does copper sulfate kill already existing roots, but it also discourages the growth of new roots and keeps growing roots out of septic systems. Copper sulfate is effective at killing roots growing in drain fieldsdrain fieldsThe drain field typically consists of an arrangement of trenches containing perforated pipes and porous material (often gravel) covered by a layer of soil to prevent animals (and surface runoff) from reaching the wastewater distributed within those trenches. › wiki › Septic_drain_field

Septic drain field – Wikipedia

and septic tanks. Not only does copper sulfate kill already existing roots, but it also discourages the growth of new roots and keeps growing roots out of septic systems.

How do I keep roots from growing in my septic tank?

Flush 2 pounds of granular copper sulfate down the toilet for every 300 gallons of water that the septic tank holds. Copper sulfate kills and dissolves tree roots as they absorb the tank’s water. After entering a tank, the majority of copper sulfate settles in tank, and little passes into the leach bed line.

Why are there roots in my septic tank?

Septic systems take up a large portion of land, and are often located close to tree roots and other underground vegetation. Tree roots are attracted to the water in a septic tank, and they enter the tank through its drainpipes or cracks in its concrete, creating blockage and other potentially hazardous problems.

Should I use root killer in my septic tank?

K-77 Root Killer can be used as needed to kill troublesome roots, thereby restoring proper working order to the system. This product works without harming surrounding trees, ground cover, or the natural bacterial content of the septic tank or cesspool.

How do you get rid of roots in a drain field?

There are special chemicals designed to kill tree roots in a septic tank system so they don’t grow back. Copper sulfate septic treatments are the most common. This method is especially effective as it creates a poison barrier within the soil that kills the tree roots before they can grow into the pipe.

How do you stop tree roots from growing into pipes?

Copper sulfate is a natural herbicide and will kill off the small tree roots invading your sewer pipes. Flushing half a cup of the crystals down the toilet should do the trick.

Can roots penetrate septic tank?

Roots Interfere With Septic Tank Operation For example, sinks, toilets, bathtubs, washing machines, and dishwashers may drain poorly because the root blocks the pipe. Even worse, a tree root could penetrate the septic tank, break open the sides, and cause a severe spill of septic fluid.

What do I do with roots in my sewer line?

Try Copper Sulfate Copper Sulfate is also effective in killing roots in your sewer line pipes. You can get it at your local hardware store. Just pour about half a cup down the toilet and flush as many times as needed to wash it off.

How long does it take copper sulfate to dissolve roots?

It can take as little as two or three days to clear out the line. However, if your system has a slower flow of water, it can take a bit longer (up to a week) to get rid of the roots. By contrast, copper sulfate takes up to four weeks to even start the process of root decay.

Does root killer hurt pipes?

No. RootX only kills the roots inside the pipe and prevents their re-growth. Since the RootX foam only flows through the pipe, it has no effect on roots outside the pipe.

How often should you use root killer?

A: You can apply the product 6 weeks after the line being rooted. Then make sure you apply the product every 6 months to ensure all root intrusion is destroyed as it starts to re-enter the line.

Does root killer damage pipes?

How it Works and What it Does. Tree root killer is pretty much exactly what it sounds like: it’s a chemical that kills tree roots. Although it’s effective for killing tree roots, copper sulfate is reputed to be bad for pipes, and can also kill helpful bacteria in your septic tank.

Keeping Roots out of the Septic System

Aesthetically pleasing trees around your home can help to lower your energy bills by shading the roof and absorbing CO2. Nevertheless, the trees growing on your land are constantly on the lookout for moisture and nutrients, which their roots frequently discover within your septic system. Because of the thick structure of septic tanks, which makes them more resistant to root penetration, tree roots often gain access to the septic system by exploiting weak places in the sewage pipe that feeds the tank or the discharge pipe that leads to the drainage field.

Once roots identify a weak place in the sewage pipe, which is indicated by seepage, they are tenacious in their efforts to enter the pipe and take over the entire system.

When roots penetrate a sewer system, they most often cause sewage backups into the residence or clogs inside of the septic tank; however, there are other implications as well.

Preventive Strategies

When it comes to tree root issues, prevention is always the best medicine. It all starts with the choosing of the trees that will be planted on your land. Rapidly spreading roots are characteristic of fast-growing tree kinds such as willow, poplar, and birch, and these roots are extremely aggressive in their search for subterranean sources of moisture and nutrients. Local colleges and tree nurseries can recommend slow-growing alternatives that will flourish in your temperature zone and soil type while providing less of a hazard to your subterranean pipes.

If you don’t know where the pipes are, a plumber can identify their location and label it for you.

Create a supportive rooting environment immediately surrounding the tree by feeding and watering it on a regular basis at the location where you intend to plant it.


Another technique to prevent root invasions into septic systems is to do regular inspections and maintenance on the system. Roots are more likely to grow in sewer pipes that are more than a decade old, such as those made of concrete or clay. Seepage or leaks are the most common causes of root growth in sewer pipes. On the other hand, sewage pipes that are in good condition and do not leak moisture may withstand root penetration for an endless period of time. The sooner seepage or leaks from failing pipes are discovered and repaired, the less probable it is that roots will take advantage of this weakness and get access to your septic system and drain field.

A routine visual examination done by a plumber with the use of a fiber optic wire put into the pipe is, in the end, the most effective method of determining the condition of sewer pipes.

Chemical Treatments

Once little “feeder” roots, which are the first indicators of root infiltration, have been discovered during an examination by a plumber or if additional signs of root infiltration have been discovered, such as unexplained slow sewage flow, chemical treatments can be used to prevent further root development. It is possible to prevent little roots from developing into mature roots that can totally clog your septic system using commercially available root treatments that are prepared with copper sulfate and flushed into the septic system.

However, it seems likely that more direct intervention may be necessary in the future.

Mechanical Root Removal

A mechanical root cleaning instrument may be used to control root invasion in pipes in a direct and effective manner. The instrument, which is inserted through sewage access ports and into the pipe by a plumber, has a revolving auger with sharpened blades that tear off root accumulations that have accumulated inside the pipe. It is possible that subsequent root issues will be significantly postponed if regular follow-up treatments with root killing chemicals are continued after a mechanical clearing process has been completed.

Removal of fast-growing trees on the land is sometimes advised in order to reduce the problem of frequent root invasions.

Remove Tree Roots From a Septic Tank

You’ll learn about the methods that a professional will use to remove roots from a septic tank.

About Tree Roots in a Septic Tank System

Infestation of tree roots in septic systems can be a significant concern. Tree roots may enter a septic system through any breach in the pipe. Spider-web-like tendrils spread down into the crevices and put out roots, which have the ability to grow as huge as the septic line itself if left unattended. While a professional should be consulted for the most accurate diagnosis and treatment, it is beneficial to be aware of the many methods that specialists use to eliminate tree roots in a septic tank.

1. Cut Tree Roots Mechanically

The use of a mechanical auger is one of the most often used procedures. In this procedure, a motorised sewer auger is sent down a septic line to clear the blockage. The spinning head is coated with teeth, much like the blade of a reciprocating saw. Because of the rotating movement, the roots are chopped and cleared, but they will quickly regrow and re-establish themselves.

2. Chemical Tree Root Removal

Special chemicals are available that are designed to destroy tree roots in a septic tank system and prevent them from regrowing. Copper sulfate septic therapies are the most often used. This approach is particularly efficient because it produces a poison barrier inside the soil, which kills the tree roots before they have a chance to grow into the pipe and cause blockage.

Using foaming compounds in your treatment has the extra benefit of covering the whole pipe, soaking the roots that sprout from both the top and bottom of the pipe.

3. Remove Tree Roots From a Septic Tank With a Hydro Jetter

Using a hydro jetter to clean sewage lines is an effective, although possibly expensive, method of clearing septic lines. This machine operates on the basis of a pump and pressured water. A chemical flushing of the septic line can be performed once the hydro jetter has completed its work to eliminate any remaining roots.

4. Manual Tree Root Removal

If a septic line has been damaged beyond repair, it may not be possible to clean or clear it with chemicals, a hydro jetter, or an auger. The extent of the damage may be determined by inserting a camera into the septic line, which will provide better diagnostics, allowing the professional to determine the best course of action, which may include accessing the septic tank to manually remove the tree roots and repair any damage that has occurred.

How to Repair and Prevent Root Intrusion

Receive articles, news, and videos about Systems/ATUs sent directly to your email! Now is the time to sign up. Systems/ATUs+ Receive Notifications Trees don’t require much in the way of resources: soil, water, and sunlight. They also bring a slew of advantages, including the following: They enhance the quality of the air you breathe, reduce your energy expenses due to the shade they give, provide habitat for animals, and are aesthetically pleasing. However, for septic systems, the roots from these trees can be one of the first signs of a far more serious problem.

  1. Regular septic system inspections and maintenance can assist to keep root invasions at bay and save costly repairs.
  2. If you find yourself dealing with this problem on a regular basis, it may be worthwhile to invest in a tiny video sewer probe to check the system’s integrity.
  3. A damaged pipe will not be repaired by any quantity of chemical.
  4. The most common points of entry are at the inlet, outflow, lid, or even through manholes, although there are others as well.
  5. As soon as the “weak point” has been found, it should be corrected to the greatest extent feasible.
  6. Mechanical removal is used in this case.
  7. This is most commonly seen in pipes when a mechanical root-clearing instrument is used.
See also:  How To Tell If Your Septic Tank Needs Emptying?

But if leaks in the pipes continue to exist and are not addressed either via repair or through complete replacement of old concrete or clay pipes with PVC sewage pipes, roots will ultimately reappear inside the pipes.

Prevention Planting trees, shrubs, and even certain ground coverings over the soil treatment components of a septic system might result in septic system difficulties in the future.

All of these forms of woody vegetation should be maintained away from the top of the system and, depending on the type of vegetation, should be kept at least 20 feet away from the system.

You may find a useful resource for identifying acceptable trees in close proximity to septic components, which is available in PDF format.

Root barriers made of plastic panels are available in a variety of depths up to 24 inches and may be obtained in most places where irrigation supplies are sold or distributed.

To be effective, the barrier should stretch from the soil surface to a depth of at least 2 feet below the surface of the ground.

Installation of the barrier fabric at least 3 feet away from the drainfield is recommended in order to avoid disruption of the system.

The geotextile barrier should not completely encircle the tree, since this may hinder it from developing properly.

Chemical treatmentsThere are several products on the market that claim to be able to remove roots from systems.

Copper sulfate is an inorganic substance that may kill bacteria, algae, roots, plants, snails, and fungus.

Chemical treatments must be continued at regular intervals; as a result, more direct intervention will most likely be necessary in the long term.

Furthermore, many of the pesticides available on the market include poisons and pollutants that will ultimately find their way into the groundwater or surrounding surface water.

It is more preferable to fix the system than to ignore it.

They are great resources; we simply need to be cautious about how they may affect septic systems in the future.

a little about the author Sara Heger, Ph.D., is an engineer, researcher, and lecturer in the Onsite Sewage Treatment Program at the University of Minnesota’s Water Resources Center.

She has presented at several local and national training events on topics such as the design, installation, and administration of septic systems, as well as research in the related field.

[email protected] with any questions on septic system care and operation. She will respond as soon as she can.

How Can I Prevent Septic Root Problems?

Trees are something that we all like. This is especially true when they give us with refreshing shade on a hot summer day in Florida. Trees may also provide shade for your home, which can assist to reduce your energy use and expenditures. The fact that you are reading this text on our website most likely indicates that you have a septic system. Then there’s the possibility of an issue with tree roots. Trees are no different from any other plant with roots in that they seek for water and nutrients in order to flourish.

Septic tanks, with their thick walls and other protective measures, are extremely resistant to root penetration.

The tree targets any weak points in the system, such as the sewage pipe feeding the tank or the discharge pipes leading to the drainfield.

So, what can you do right now, and what may be required of you in the future?

How Can I Prevent Septic Root Problems?

The following is required reading if you have just acquired or constructed a home and are uncertain of what you can do to avoid future difficulties. It is recommended that you exercise caution while selecting which sorts of trees to plant if there are no trees already in place on your property. Typically, trees with rapid growth have roots that are quite aggressive in nature. Not sure which trees would be the greatest choice? You may always speak with a local nursery, and they will be able to provide you with some options that may prove to be really beneficial in the future.

It is necessary for you to be aware of the location of your septic system.

Finally, after you have planted your trees, you may stimulate the growth of the trees’ roots close to the tree by watering and nourishing them.

What Maintenance Should I Do?

In order to eliminate root incursions into your septic system, you should examine and maintain your system on a regular basis. Roots are more likely to invade septic systems that are more than a decade old. This is due to the fact that they are the most prone to suffer seepage or leakage. Depending on how well your septic system is maintained and how often it is checked, you may never have any issues with tree roots at all. Some telltale indicators of leaky pipes in your septic system include brilliant green grass sections in your yard when the rest of your yard is brown, or soft moist places in your yard, as well as the stench of sewage in the air.

In Punta Gorda, for example, we can witness fast-moving roots from trees and bushes that are growing swiftly and aggressively in quest of water throughout the hot, dry months of the summer.

If you have not had a septic inspection lately and would like to make sure your septic system is in good working order give us a call or click here to request service.

Posts that are recommended

Tree Roots in Septic Tanks: The Dangers and Fixes

Residents who have a big number of trees in their yard put themselves at risk of having problems with their septic system. This condition develops gradually over a lengthy period of time, but it can become a serious problem if it is not properly addressed. Thanks to some do-it-yourself root management and expert septic assistance, it may be possible to pull tree roots out of a septic tank for good. The growth of tree roots occurs at all times of the year. Trees are extremely hardy, and they can withstand the hardest winter temperatures as well as the hottest summer temperatures.

  • These durable extensions of the tree continue to develop throughout the tree’s lifetime, increasing the stability of the tree and its capacity to receive nutrients as they do so.
  • Although certain trees may continue to grow in the fall, the spring and summer months are the most productive for root development.
  • Although a tree planted in the backyard will not cause immediate damage to the septic field system, its roots may eventually reach it.
  • It is amazing how well tree roots can find their way into a sewage system and work their way into the system’s plumbing.
  • Septic tank operation is hampered by the presence of roots.
  • Sinks, toilets, bathtubs, washing machines, and dishwashers, for example, may drain poorly because a root has clogged the pipe leading to the drain.
  • A sewage spill of this nature will result in areas of green growth that are denser in density than the normal development of the grass.
  • It is possible for homeowners to notice an overwhelming foul smell of sewage or even a faint gas smell, which are all caused by leakage from the compromised septic tank.
  • While most sewage is beneficial to plants and trees, the gas and bacteria found in this waste can cause a variety of illnesses.
  • coli, Salmonella, Shigella, and Cholera.
  • Troubleshooting Root Causes by a Professional Anyone who is experiencing tree root troubles in their septic system should get expert assistance as soon as possible.

For additional information on this issue, please contact or come see us at Southern Sanitary Systems Inc. With the assistance of our expertise, your septic tank will be root-free and healthy again in a short period of time with no effort.

Kill Roots In Your Septic Tank With A Root Removal Treatment

It is possible to successfully eliminate roots in septic tanks without harming the trees with RootX root killer. Using RootX root killer to get rid of hair-like roots in your septic tank is a vital, safe, and economical step in properly maintaining the health of your septic tank. In the event that you have trees in the vicinity of or surrounding your septic tank, there is a strong likelihood that you will have tree roots growing in your tank. Your septic tank or drain field may get clogged with tree roots, which can reduce or eliminate the leaching capacity of your septic system.

The septic tank is a watertight subterranean box that has historically been constructed of concrete, in which microorganisms decompose organic compounds contained in the waste stream.

Wastewater flows into the tank.

Using RootX to Eliminate Tree Roots in Septic Tank

It is recommended that you use 8 pounds of RootX in a septic tank per 1,000 gallons of septic tank capacity for the most efficient treatment of roots in septic tank (refer to chart below). If you are applying RootX tree root killer through a cleanout or a toilet, you must consider the length of the pipe that runs from the cleanout or toilet to the septic tank before proceeding. In the following example, if you are administering RootX through a cleanout that is 35 feet distant from your septic tank and your plumbing pipe is 4″ in diameter, then you must add 2 pounds to the total quantity of RootX necessary for the volume of your septic tank (refer to chart below for pipe diameter dose rates).

If you have roots in your leach field system, you should examine our instructions for treating roots in leach field systems before proceeding.

How to stop roots from going into septic system?

Is the stump still alive and kicking? For every 300 gallons of water that the septic tank can store, flush 2 pounds of granular copper sulfate down the toilet to decompose it. Copper sulfate is a chemical that destroys and dissolves tree roots when they absorb the water from the tank. After entering a tank, the majority of the copper sulfate settles in the tank, with just a little amount making its way into the leach bed. The chainsaw was used to cut a path through the tree trunk close to the ground.

  1. Dormant trees are not susceptible to herbicide application.
  2. Glyphosate should be poured into each hole.
  3. Remove the tree from the area by cutting it up and hauling it away.
  4. Remove the manhole cover and look into the tank to see how much liquid is present.
  5. – It is possible that a clogged line is causing a level less than one foot below the top of the tank.
  6. Take cautious not to do any harm to the pipe.
  7. If roots are growing into the pipe, remove the end of the pipe that is closest to the septic tank and replace it.
  8. Insert the sewer auger into the pipe’s end and cut out the roots with the auger blade.
  9. After tree roots that are at the surface level of the leach field have begun to deteriorate, they should be dug up and pulled away.

After the roots have decayed, they are much easier to remove from the soil than before. Keep an eye out for pipes in the leach field and avoid digging them up. Things You’ll Need to Get By

  • Drill with a 1/ 2-inch bit
  • Glyphosate, 50 percent concentration (Round-Up)
  • Sewer auger (optional)
  • Shovel
  • Chainsaw
  • Safety glasses and gloves
  • Leave the roots in the leach field if they do not obstruct the flow of water via the septic system. The glyphosate will prevent them from reproducing and multiplying. They will eventually decompose and become part of the soil.
  • Large trees should be removed by a professional. It is possible that nearby trees of comparable height or age will have a root system that is merged with the tree that you plan to remove. It is possible that treating with glyphosate can harm a tree that you wish to maintain
See also:  How Do You Know When To Clean Out Septic Tank? (Correct answer)

How to Keep Tree Roots Out of Your Septic System

Planting trees in your yard provides a number of advantages, including increased shade and visual appeal, among others. A tree that is placed too close to your septic system, on the other hand, might cause significant damage. It is critical for you to consider a number of variables before you begin planting new trees or constructing a new septic system on your property.

How do tree roots affect your septic system?

Water sources are attracted to tree roots by their natural attraction to water. They have the ability to “detect” regions of wetness, which is very useful near your septic system. Because the roots are unable to enter the tank itself, they direct their growth toward weak sections of the pipes. Roots grow into the pipes and eventually burst through, creating leaks, clogs, blockages, and long-lasting damage.

How can you keep tree roots out of your septic system?

The removal of tree roots, as well as the prevention of tree roots from becoming a problem in the first place, can be accomplished by a variety of approaches. When possible, it is always preferable to avoid prospective issues before they become a reality. It is recommended that, when designing or building a new home, the septic system be situated away from big clumps of trees. Whenever you are replacing trees, avoid planting them too close together and avoid planting trees with rapidly expanding roots (such as willow trees and birch trees).

  1. It is possible to have a plumber draw out the arrangement for you if you are unsure of the layout.
  2. If you acquired a property that already had trees near the septic system, but the roots had not yet reached their destination, you may be able to limit root development with certain chemical treatments before it becomes too late.
  3. If the roots have already made their way into your septic system, mechanical removal will almost certainly be required.
  4. A chemical treatment is then applied, which is quite successful in unclogging your drains and sewers.
  5. Trees and septic systems cannot continue to live in close proximity for an endless period of time.

Does routine maintenance matter?

Septic systems, like most other appliances and systems, require expert inspections on a regular basis to ensure that they are operating properly. Leaky pipes cause more moisture to be produced, which encourages tree roots to develop more quickly. Maintaining your vehicle on a regular basis helps to keep tiny problems from becoming huge difficulties. It saves you money while also keeping you safe from system failures altogether. Taking the time now to schedule an inspection might save you a lot of time and aggravation later on.

is a service-oriented company devoted to delivering exceptional septic tank cleaning and pumping services for both residents and business owners in the region.

We take great delight in finishing the task that others have left unfinished. If you have any more questions or would like to arrange a septic tank cleaning with one of our specialists, please contact us right away.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

How to Kill Tree Roots in a Sewer Line

If you’re finding that your sinks or bathtubs are draining slowly, or if you’re hearing a peculiar gurgling sounds coming from your toilet, it’s possible that tree roots have infiltrated your sewage pipes. A small-scale root invasion will only cause you minor inconvenience, but if left unchecked, this problem might result in thousands of dollars in damage.

Tree Roots are Attracted to Your Sewer Lines

Believe it or not, tree roots are naturally drawn to sewage lines, despite the fact that they carry a variety of unattractive materials. The water, oxygen, and various nutrients contained within your pipes make them an ideal location for a tree to establish its root systems. An open fracture or loose connection in the pipe will often enable vapor to escape and condense on chilly earth. The tree roots grow towards this in quest of moisture and nourishment, pushing their way into the crevices of the pipe and establishing a permanent residence inside.

The roots form a sort of net that will trap everything that is sent down the line, resulting in an annoyance clog that will cause your drainage system to slow down significantly.

Fortunately, there are methods for treating them yourself before they get uncontrollably severe.

If you decide to take care of this situation on your own, there are a handful of straightforward and reasonably priced choices open to you.

Rock Salt Can Kill Roots by Drying Them Out

The first technique is to pour sodium chloride or copper sulfate, sometimes known as rock salt, into your toilet tank and flush it. Into your toilet, pour a half pound of the salt and flush as many times as necessary to clear out the bowl. Continue this method until you have flushed 2 pounds of salt into your pipes. Keep your toilet flushed and any water flowing that will drain into the impacted pipe for 8 to 12 hours to allow the compound to do its job. Plants are not only poisoned by this molecule, but it also functions as a very efficient sponge, sucking up moisture from the roots, causing them to become unable to survive.

Performing this procedure a couple of times a month can assist in keeping your pipes free of roots. However, employing rock salt has the potential to destroy the entire tree and its surrounding flora over time, so proceed with caution if this is not what you want to do.

Foaming Root Killers Will Prevent Root Regrowth

One technique is to fill your toilet with sodium chloride or copper sulfate, sometimes known as rock salt. Into your toilet, pour a half pound of the salt and flush as many times as necessary to clear out the bowl, then repeat the process until you have flushed 2 pounds of salt into your pipes. Keep your toilet flushed and any water flowing that might drain into your afflicted pipe for 8 to 12 hours to allow the compound to do its job. Plants are not only poisoned by this molecule, but it also functions as a very efficient sponge, sucking out moisture from the roots, preventing the plants from thriving.

But be aware that using rock salt may eventually result in the death of the entire tree and nearby vegetation, so proceed with caution if this is not what you want to do.

You Can Prevent the Problem Before it Starts

While the methods described above for cleaning up roots in your sewage pipes are less expensive than hiring a professional firm to handle it for you, avoiding the problem from arising in the first place is by far the most cost-effective option accessible to you. If you have any plans to plant anything in the near future, you should first determine where your utility lines are located in your yard. It is possible to contact aBefore You Digservice to find out where new trees should be planted and where they should not be planted so that you will not have to worry about their roots intruding your sewage lines.

When planting larger trees, make sure to keep them at least 10 feet away from any utility lines or far enough away that their roots will not be able to reach your water lines.

Keep Tree Roots Out of Your Septic System

Riverside, California 92504-17333 Van Buren Boulevard Call us right now at (951) 780-5922. Planting trees around your home is a terrific way to provide shade, improve the appearance of your property, and improve the air quality in your neighborhood. The location of your trees, on the other hand, has to be considered if your home is equipped with a sewer system. Having a huge tree or a number of large trees in close proximity to your septic tank will ensure that the roots will eventually make their way there.

Everything listed above is what tree roots require in order to survive and become strong.

Once within your system, tree roots have the potential to clog or even destroy drainage and distribution pipes, and they may quickly increase in size to the point where they impede the flow of water.

Having roots in your septic system is a sign that it is time to call a professional to get them removed. In order to keep roots from becoming an issue in your septic tank, there are many methods you may use to keep them out of your tank.

  • Recognize the location of your septic tank and drain field before you start digging. You should have a schematic of your system, as well as a map of its exact position on your land. To ensure future reference, maintain precise records of system maintenance. Planting trees in close proximity to your system is not recommended. When landscaping your property, keep in mind that tree roots might spread out in search of water and nutrients, so be sure to account for this when designing your layout. Preventing tree root systems from spreading is a good concept
  • Before planting a tree, find out what kind of root system it has. Slow-growing trees have fewer harmful roots than fast-growing trees, which is why they are often preferred. Grass provides the most effective protection for your septic system. If you have plants growing above your septic tank cover, keep in mind that they will be harmed or killed if you need to get access to the tank. Root growth can be controlled by using substances that inhibit root development. It is possible to prevent little roots from developing into mature roots that can totally clog your septic system by using commercially available root treatments prepared with copper sulfate and flushed into the septic system. Root barriers are solid sheets or panels of hard plastic or other materials that are buried into the ground and operate as a form of barrier against the growth of weeds and other undesirable plants. It is vital to remember that these sorts of obstacles may prevent the tree’s roots from spreading freely, which might have a negative impact on the tree’s health. Sometimes it is preferable to remove a tree rather than target its roots. Hydro-jetting: If you feel that tree roots are to blame for your blocked system, it is probably time to consider hiring hydro-jetting experts to clear the blockage. In order to perform this service, the highly skilled expert will make use of a specialized gadget that will inject pressured water into the pipes. When used properly, hydro-jetting may successfully clean away tree roots and other reasons of poor draining pipes, such as grease accumulation. Schedule an inspection of your system at least once a year. Performing regular septic inspections and maintenance can help to avoid root infiltration by identifying problems early on.
See also:  Why Can'T I Flush My System Into The Septic Tank? (Best solution)

We at West Coast Sanitation understand that you are busy and do not have time to deal with septic issues. If you suspect that encroaching tree roots are causing damage to your system, please contact us at (951) 780-5922 as soon as possible. If you have any questions, we have specialists standing by to help you resolve them and get your system back up and running.


It is possible for your septic system to provide efficient wastewater treatment services for decades at a time, but when it becomes clogged or otherwise compromised, it can become a source of concern. The infiltration of tree roots into septic lines and backups is a typical occurrence; thus, you should educate yourself on how to avoid such occurrences. Listed below are four variables that might influence how vulnerable your system is to a root intrusion. 1. THE DISTANCES BETWEEN THE AGGRESSIVE ROOT SYSTEM One of the most straightforward root damage prevention measures is to simply keep all aggressive root systems as far away from your septic system as possible.

  1. You must be aware of the exact location of all components of your septic system, and if you have a small property, maintaining trees at a safe distance might leave you with little space to plant trees on the entire land, which could be problematic.
  2. Make sure that any trees you plant on your property that are tiny and drought-tolerant are placed in areas where they will not interfere with the septic system’s operation.
  3. Furthermore, trees aren’t the only concern; shrubs may also have enormous, aggressive root systems, so you’ll want to research the characteristics of any bush you want to plant before putting it near your septic system to be sure it’s safe.
  4. The roots will attempt to locate the leak and can then send a tiny point into the system through even the slightest of cracks or openings.
  5. 3.
  6. The deeper your septic system is buried, the greater the distance that tree and bush roots will have to travel in order to do damage to it.
  7. It is possible, though, that you may have to remain with only grass for the entire surrounding region if your topsoil is thin and your system is only a few inches below the surface.

Root barriers can be installed to protect against root intrusions.

But it needs digging and can be a time-consuming and expensive procedure.

However, it is not a 100-percent assurance.

As a result, there is a two-fold protective system in place.

According to the information provided, there are various measures you can take right now (such as removing trees and building tree root barriers) to avoid tree root damage to your septic tank if you do not currently have a problem with tree root damage.

We’re here to assist you with septic and sewer maintenance and inspections in the Santa Cruz region at any time.

Keeping Tree Roots Away From Drain Field – Septic Maxx

Septic systems are a larger financial commitment than most people realize. New systems may cost anywhere between $5,000 and $10,000, which is why it is critical for septic system owners to safeguard their investments by maintaining their systems. Septic system failure can be caused by a variety of factors, including improper septic system maintenance, parking automobiles on drain fields, and overloading septic systems. The majority of homeowners do everything they can to protect their septic systems by refraining from engaging in harmful actions.

When trees reach a certain age, their root systems can become extremely complicated, and if they are placed too close together, they can cause drainage problems.

If they can’t find a supply of water, invasive roots will stop at nothing to get it.

Tree roots should be kept away from drain fields by following the guidelines provided here.

Be Proactive

Homeowners who are contemplating building a septic system should pick a septic contractor with extensive expertise. In addition, they can determine the most appropriate installation locations for the various components of the septic system, such as the septic tank and drain field. They can also point out whether or not any current foliage poses a threat and how it might do so. Septic systems are already installed in a large number of properties. When contemplating landscaping around a drain field, it is important to first pick safe plants, shrubs, and trees that will not interfere with the drainage system’s operation.

Do Research

When purchasing a property with an on-site wastewater treatment system, homeowners should educate themselves on all aspects of the septic system’s operation. They can begin by identifying the location of the septic tank, drain field, and other components of the septic system. This can assist the homeowner in keeping an eye on the system and diagnosing problems as and when they develop. Owners of septic systems should inquire as to whether invasive roots were a concern for the previous homeowner in relation to the drain field.

By conducting the appropriate research, a property owner can avoid potential septic difficulties.

Create Physical Barriers

When it comes to drain field protection, physical root barriers are a possible solution. They may be ordered online and installed either by the homeowner or by a professional contractor. This will only be effective if the septic system has not yet been infiltrated by tree roots. If this is the case, the homeowner should consult with an expert to check the septic system and provide recommendations. The presence of invasive tree roots should not be the main source of concern for homeowners. A septic tank that is not properly operating might enable sludge to run into drain field pipes, causing the drain field to flood.

All of our products are environmentally safe and work to keep your system running smoothly. Please go through our septic products and place an order right now!

How to Treat Roots in Your Septic System (Part 1) – Septic Maxx

With the arrival of spring comes green growth, growing roots, and other plants that may enter your septic tank and cause difficulties. It may not appear that the outer environment of your lawn poses any danger to your septic system, but trees’ roots can invade and harm your septic tank, necessitating the need for costly repairs. By following the recommendations in this book, you will learn how trees and shrubs can pose a threat to your septic system, as well as what you can do to remedy and avoid the problem.

How it Starts

Natural tree roots can infiltrate a sewage system through microscopic fractures and connections in the septic pipes, which are common in natural environments. At some point, a sufficient amount of the tree root gets into the tank, causing sewage obstruction and backup to develop. The roots will continue to grow into your septic system if not treated, clogging the pipes even more and even developing breaks that would allow sewage to flow into your garden. Eventually, the roots will collect and your septic tank pipes will become badly clogged, resulting in delayed drainage and the possibility of your septic system failing.

How to Fix it

After discovering that your septic system has failed, you may be tempted to pour an abrasive chemical down your septic drain in attempt to eliminate the roots that have grown there. You should avoid doing so since you will be doing more harm to your septic system than good to it in the long run. These chemicals are only intended for use on little roots, and they are unlikely to be effective in dealing with a big root obstruction in your septic system. The most secure method of fixing a faulty septic tank system is to call a reputable septic repair firm that is skilled and licensed to do service in your region of residence.

In the majority of cases, a septic tank expert will need to use an auger to clear the clogged sewage, which cuts and removes roots as it works.

Tips for Keeping Tree Roots Away from your Drainfield

Your septic system installation was a significant financial commitment. When you consider that the majority of new systems cost between $5,000 and $10,000, preserving your investment is critical. One of the most common causes of drainfield failure is improper septic system maintenance. Other causes include system overloading and parking automobiles on your drainfield. Tree roots, on the other hand, are something you may not think about very often. Growing older and larger, the root systems of the trees on your property get increasingly complicated, and if the tree is planted too close to your drainfield, the root system may even become a source of interference with the drainfield.

Take the initiative.

Prepare yourself for future landscaping by learning as much as you can.

Listed below is a comprehensive list of the plants and trees that can be grown on top of or near your septic system.

Root-barriers that are physically present.

If the roots are still a long distance away from the drainfield, these can be ordered online and installed by the homeowner themselves.

Roots penetrating your drainfield and plumbing are more prevalent than you would think, and they can cause significant damage.

If you’re having problems with your septic system and suspect that roots are to blame, call a professional septic system contractor who can assist you in troubleshooting the problem and finding a solution.

Leave a Comment

Your email address will not be published. Required fields are marked *