How To Make Waste To Sink In Septic Tank?

• Use a Bacteria Additive The waste that comes from the home doesn’t simply sit in the septic tank and collect until it’s time for the tank to be pumped. It is filtered by weight, allowing the solids to sink to the bottom of the tank and releasing the liquid waste to the leach field where it can be filtered by the soil.

How do you dissolve waste in a septic tank?

Here are a few things you can do to help you break down the solid waste in your septic tank:

1. Active Yeast. Add ¼ to ½ cup of active dry yeast to your toilet bowl and flush it down your toilet.
2. Rotten Tomatoes.
3. Hydrogen Peroxide.
4. Inorganic Acids.
5. Chemicals.
6. Pumping.

What to put in septic tank to break down solids?

Yeast helps actively breaks down waste solids when added to your septic system. Flush ½ cup of dry baking yeast down the toilet, the first time. Add ¼ cup of instant yeast every 4 months, after the initial addition.

Does poop dissolve in septic tank?

Solid waste (a.k.a., poop) can build up, break down, fuse and create a mass that does some really bad things to your septic system. Here is what you can do, both prevention and repair-wise, with regards to solid waste becoming too solid in your septic tank.

How do I increase bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

What eats waste in septic tank?

Large colonies of bacteria and enzymes in your septic tank keep the tank from backing up or overfilling. Enzymes go to work on the scum, and bacteria goes to work on the sludge. The microbes eat the waste and convert large portions of it into liquids and gases.

Is baking soda and vinegar safe for septic systems?

Will baking soda hurt a septic system? Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.

What is the best thing to put in septic tank?

The products below represent some of the best septic tank treatments available in their respective categories.

• BEST OVERALL: Cabin Obsession Septic Tank Treatment.
• BEST BUDGET: Green Gobbler Septic Saver Bacteria Enzyme Pacs.
• BEST FOR CLOGS: Instant Power 1868 Septic Shock.

How do I reduce the sludge in my septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

1. Install an aeration system with diffused air in your septic tank.
2. Break up any compacted sludge.
3. Add a bio-activator or microbe blend.
4. Maintain the aeration system.
5. Add additional Microbes as required.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

1. Regularly inspect and maintain your septic system.
2. Pump your septic tank as needed.
3. Keep your septic tank lids closed and secured.
4. Be water-wise.
5. Direct water from land and roof drains away from the drainfield.
6. Landscape with love.
7. Keep septic tank lids easily accessible.

How long does it take for poop to break down in a septic tank?

The bacteria take 2-4 hours to germinate and then begin to break down solid waste. If the temperature and conditions are favorable, then the bacteria will multiply to the maximum level that the environment will allow in about 2-4 days.

How long does it take for human waste to decompose in a septic tank?

It can vary from as little as 2 years to as long as 100 years! Rather than waiting for the septic system to reach its breaking point, it is advisable to act upon it beforehand, cleaning the tank out every 1–3 years is advisable.

What dissolves hard poop?

Vinegar And Baking Soda You’ll need a pot of hot water, a cup of baking soda and a cup of vinegar. Pour the baking soda into your toilet bowl. Then add the vinegar a little bit at a time to avoid overflow. The mixture should start fizzing and bubbling immediately.

What kills bacteria in septic tanks?

For example, while chlorine bleach is a useful disinfectant in the home, it kills beneficial septic tank bacteria. In addition to bleach, avoid constant use of antibacterial soap and harsh drain cleaners. Also, many toilet bowl cleaners have bleach or hydrochloric acid, which kills septic tank bacteria.

Should I add anything to my septic tank?

You don’t need to add more, feed them or support them at all. If you add more bacteria without more waste, the bacteria will only eat each other. The bacteria are anaerobic, so they don’t even need air. All your tank needs to stay in shape is regular inspection and pumping to remove the solid sludge layer.

What is the best bacteria to put in septic tank?

Much like your stomach, septic tanks need good bacteria and enzymes to break down the solids that pass through it. These beneficial bacteria and enzymes can come from several sources, but our favorite is actually rotten tomatoes. These naturally occurring enzymes are proteins called Pectinase or Pectinolytic enzymes.

How to Construct a Small Septic System

Documentation Download Documentation Download Documentation There are two main sections to most private septic systems: the holding and digesting tanks, and the dispersion field or leach field. As the liquid waste in the first holding tank fills up, it will be transferred to the second holding tank. Once the second tank is completely filled with liquid, the liquid will dissipate into the soil beneath it. The system displayed here is a small system that is intended for limited use by two people who do not need to do laundry.

When compared to a standard home septic system, this system uses two 55 US gallon (210 L) drums, rather than the 1,000–2,000 US gallon (3,800–7,600 L) tanks that are used in a standard home septic system.

Property owners considering installing a system similar to this one should be aware that this system would fail inspections by any public health department in the United States, and that the owner could be subject to a fine if the system was discovered in use by a health official.

Toilets that conserve water nowadays utilize less than two litres of water every flush.

It might be a lifeline for those who live in areas where septic treatment is not available.

Part 1 of 3: Cutting the Tanks

1. 1Cut a hole in the center of the top of each drum that is the same size as the outer measurement of the toilet flange. Take the outside diameter of the toilet flange that you’re using and multiply it by two. Place the hole close to the edge of the drum so that you may simply connect them to pipes in the near future. Cut the drums using a saber saw to make them lighter
2. 2 Each hole should be capped with a 4 in (10 cm) toilet flange. Push the flanges into the top of each tank until they are flush with the surface. As soon as the flanges are in position, tighten them down so they don’t move or shift once they are in place. Advertisement
3. s3 Cut a hole in the first drum that is 4 in (10 cm) in diameter on the opposite side of the drum from the hole in the top. Placing the hole approximately 4–5 inches (10–13 cm) below the top of the drum and ensuring that it lines up with the hole on the top of the tank are the most important steps. 4 Make a hole in the wall with a saber saw or a hole saw. Cut two holes in the side of the drum at 45-degree angles to the center of the hole on the top, one on each side of the drum. The center line is the line that runs through the middle of the hole on the top of the drum. Make 45-degree angles from either side of the centerline, then mark them on the second drum using a permanent marker. Make your holes in the barrel by cutting through the side with a saber or a hole saw and drilling them out. Advertisement

Part 2 of 3: Placing the Tanks Underground

1. 1 Dig a trench that is 4 ft 26 ft 3 ft (1.22 m 7.92 m 0.91 m) in length and width. Excavator or shovel are both good options for digging a hole in the ground where you wish to put your tank. Continue excavating until the hole measures 4 feet (1.2 m) in width, 26 feet (7.9 m) in length, and 3 feet (0.91 m) in depth.

• Excavators for excavating are often available for hire from a heavy machinery supply company. Look for equipment rentals on the internet

1. 2Place the drum at the end of the trench, with one side hole drilled in it. When you place the drum on the floor, make sure it is level. Check to see sure the drum’s top is at least 4 inches (10 cm) below the surface of the water. 3 Dig a hole that is one foot (30 cm) deeper than the first to accommodate the positioning of the second drum in front of the first. In order to ensure a tight fit and prevent the drum from shifting, make your hole the same diameter as the drum you’re inserting in it. 4 The hole should be leveled with gravel until a 90-degree curve can be made to connect the top drum’s hole on one side to the toilet flange on the other. Check the alignment of the holes in the 90-degree bend between the two drums by dry fitting it between the two drums. If you need to improve the alignment of the pipe line, dig the hole a little deeper. 5 To make the bend, cut 31 2in (8.9 cm) pieces of ABS pipe and adhere them to the bend with epoxy or hot glue. With a hacksaw, cut the ABSpipe parts, also known as nipples. 6 Insert the pieces into the bend and hold them in place using PVC adhesive. Check the fit between the two drums to ensure that they are in alignment. Insert the end of the 21 2in (6.4 cm) nipple into the side hole of the first drum and tighten the nut. 7Glue the end of the 31 2in (8.9 cm) nipple into the toilet flange on the second tank, making sure that the nipple on the other end aligns with the hole on the top of the second drum. To hold the bent in place, apply PVC adhesive to the inside of the curve. Don’t be concerned about the link to the first drum just yet
2. You’ll make that connection later. 8. Glue a Y-bend to a 31 2in (8.9 cm) nipple, and then bend the angled piece of the Y-bend at a 45-degree angle. Using your PVC adhesive, attach a nipple to the end of the Y-bend and let it dry. Assemble the Y-bend and align the angled pipe on it so it meets the incoming waste line, then glue it onto the toilet flange. 9 21 2in (6.4 cm) nipples are cut and glued to one end of the 45-degree bends at the bottom of the lower drum, and they are then inserted into the side of the lower drum. Directional bends are defined as those that are perpendicular to the bottom of the trench at their ends. Advertisement

Part 3 of 3: Connecting the Drain Pipes

1. Put a stake into the ground and level it with the bottom of each of the 45-degree bends. 2Put a stake into the ground and level it with the top of the 45-degree bends. It doesn’t matter what sort of stakes you use since they all work. Use a mallet or hammer to pound the stakes into the ground. Attach a one-inch-wide block to the end of a four-foot-long (1.2-meter-long) level using duct tape. This will assist you in ensuring that you create sloped drain pipes so that your tanks can empty
2. 3Place another stake approximately 37 8ft (1.2 m) down the trench from the first one
3. 4Place another stake approximately 37 8ft (1.2 m) down the trench from the first one
4. 5Place another stake approximately 37 8ft (1.2 m) down the trench from the first one. Drive the stake down until it is the same height as the first one using your hammer or mallet
5. 4 Place the end of the level without the block on the first stake and the block on the second stake to complete the level without the block. Continue to pound the second stake into the ground until the level is balanced. 1 inch (2.5 cm) lower than the previous post, or 1 inch (0.64 cm) lower per 1 foot (30 cm)
6. 5Repeat this method until you have stakes running the whole length of the trench
7. Continue to place stakes down the rest of the trench every 37 8feet (1.2 m) from the last one, ensuring that the stakes slope away from the drums
8. 6Place gravel in the trench until the top of the gravel is level with the top of the stakes
9. 7Place gravel in the trench until the top of the gravel is level with the top of the stakes The gravel will now slope away from the drums at a rate of 1 4 inch (0.64 cm) per 1 foot (30 cm) of horizontal distance
10. 7Place 20 ft (6.1 m) of perforated drain pipe into each hole on the second drum
11. 8Place 20 ft (6.1 m) of perforated drain pipe into each hole on the third drum
12. 9Place 20 ft (6.1 m) of perforated drain pipe into each hole on the fourth drum
13. 10P Insert the ends of the drain pipes into the 45-degree bends on the lower drum to complete the installation. 9Make certain that the perforations in the pipes are facing down so that liquids may soak back into the earth
14. 8checking the pipes with a level to ensure that the 1 4in (0.64 cm) slope is consistent throughout the length of the pipe. Fill up any gaps in the slope by adding or removing gravel under the pipe. Seal the 45-degree and 90-degree bends that connect the lower and top drums, respectively, with silicone. For the greatest seal possible on your drain pipes, use a two-part epoxy or silicone caulk. For this purpose, consider utilizing flex pipe, which will yield a little bit if the ground changes. Tenth, fill the lower drum halfway with water to keep it from collapsing under the weight of all the gravel. Place the remaining gravel over the trench and into the bottom drum, covering it completely. 11Lay landscape fabric over the top of the gravel. As a result, the dirt will not be able to seep into the gravel and you will be able to keep proper drainage on your tanks
15. 12Fill the remaining trench area with soil, compacting it to the original grade. When you have finished filling up the area with your dirt, check to see that the ground is level. 13Fill the upper drum with water, leaving the top pipe from the first tank exposed so that you can readily reach the tanks if you need to drain them later. 14Fill the lower drum with water. Fill the top drum with water and pour it directly down the exposed pipes on the bottom drum. Continue filling the drum until it is completely filled, then secure the top with a cap to keep out the elements. Advertisement

Community Q A

Create a new question

• Question What is considered a low level of use? Low consumption is defined as less than 125 gallons per day. Question Was the ‘y’ elbow on the first tank’s tank for any particular reason? Is it left open or sealed when it has been completed? Isn’t it going to stink if it’s left open? The clean out requires a threaded cap or plug, which is provided. Question What kind of water do you use to fill it? “Fill” is the most important term here. Continue to fill the drum with water until the level does not rise any more
• Question Suppose I neglected to attach a slip coupler to the perforated pipe and only had 10 feet of it. Is it still possible to use this? Yes, however you will need to raise the depth of the field in order to get the same cubic feet of capacity
• Nevertheless Question What is the best way to find out if something is legal in my state? This is a quick and easy approach that is unlikely to be appropriate for long-term usage in the majority of states. It is possible that the property owner and/or the installation will be penalized if this is uncovered. Question Is it possible to utilize two or three 275-gallon water totes instead, or a water tote and barrel combination? It doesn’t matter either direction you go. It’s best to utilize a single tote and a barrel as a digestion tank and a distribution box if you have only one tote. Question What is the purpose of filling the higher barrel with water? You fill the top barrel with water so that when sewage waste is introduced into the barrel, it flows into a sufficient amount of water to initiate the anaerobic digestion process. Question What is the best way to clean up this system? If there is enough bacteria in it, it will clean itself with minimal effort. If it starts to fill up, you may call a septic service to have it emptied
• If it doesn’t, you can do it yourself. Question What is the correct grade slope of the drain field for every ten feet of length of the drain field? It is possible for the field’s bottom to be level. When running away from the drums, the pipe system should be sloped at 2 percent, or 2.5 inches every 10 feet. Question Is it possible for this system to freeze in the winter? And might I use antifreeze in the mix as well? Antifreeze will destroy the beneficial bacteria that are required for the process to function properly. The process is biological, and it will generate some of its own heat as part of the process. It’s always possible to dig a little deeper to gain a little extra insulation above it.

More information on the replies Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

VideoBy using this service, some information may be shared with YouTube.

• The horizontal side of the “Y” links to the waste source, and it should be fitted with a connector that is compatible with the source supply line
• Instead of using a 90° elbow, you should join two of them together to produce a U-shaped connection. In this manner, the end that is in the first barrel will be pointed towards the bottom of the tank, rather than the top. This should be reinforced with a short segment of straight pipe that is several inches deeper towards the bottom. Solids either float or sink depending on their density. They don’t seem to congregate in the middle. As a result, only the broken down liquid waste makes it to the second tank, and the solids are never seen again. The same procedure should be followed for each of the drainage pipes that originate from the second barrel. Just to be completely certain that no solids find their way into the global drain field, the waste is dumped into the first tank, with the solids settling to the bottom of the first tank. Whenever the liquid level exceeds the outfall to the second tank, it is drained into the tank below it. If there are any solids present, they will sink to the bottom. Whenever the liquid from the second tank reaches one of the two outfalls, it is transported to the gravel leaching field for dispersion. Over time, the vast majority of the solids will liquefy and disperse. Solids may accumulate at the top of the tank after many years, necessitating the removal of the solids. Thirty percent of the waste is absorbed into the earth, with the remaining seventy percent being dissipated by sunshine. It is important not to compress the soil since this would interfere with the evaporation process
• The vertical side of the “Y” will be used to pump out the tank after it is entirely filled with solids
• The depth of the trench should be proportional to the depth of the waste source line. If the line is deeper or higher than the one depicted, you will need to dig the trench deeper or shallower to suit the new line depth or height. It’s not that difficult to find out. In the event that you have a septic system that is too shallow, it may be more susceptible to damage. After a period, you may discover that the ground has sunk below the trench’s location. Fill it in with extra dirt and compact it
• It is assumed that you are familiar with working with ABS plastic pipe. In addition, you must have the necessary tools to dig the trench (or be ready to put in a lot of effort).

Send in a Suggestion All tip entries are thoroughly scrutinized before being published on this website. Thank you for submitting a suggestion for consideration! Advertisement

Warnings

• This is a system with a relatively limited capacity. This is not intended to suit the demands of a big family or group of people. It is intended for use with a modest travel trailer and two individuals. In order to extend the life of this little septic system, it is recommended that you do not place anything else in it but water, trash, and toilet paper. You may have to pump the upper drum once or twice a year if you don’t do so. During the course of five years, the system depicted here will only require pumping twice. Do not drive through the area where the drums are located. When establishing a septic system, make sure to adhere to all applicable municipal regulations. It is against the law to establish a septic system without first obtaining a permission. In the permission, you can find information on the local regulations for installing a septic system. You should avoid situating a septic system too close to trees since tree roots will grow into your lines, block them, and eventually cause damage to your system.

Advertisement

Things You’ll Need

• 3/4 or 1 1/2 crushed rock or blue metal
• 80 square feet (7.4 m 2) of landscaping fabric
• 9 cubic yards (6.9 m3) of 3/4 or 1 1/2 crushed rock or blue metal 55 US gal (210 L) plastic drums
• 10 feet (3.0 m) of ABS plastic pipe with a diameter of 4 in (10 cm)
• 4 in (10 cm) ABS 90-degree bend
• 4 in (10 cm) ABS Y-bend
• 3 ABS 45-degree bends with sizes of 4 in (10 cm)
• 2 55 US gal (210 L) plastic drums A total of 40 feet (12 meters) of 4 inch (10 cm) perforated drain pipe
• Two 4 inch (10 cm) diameter drain pipe couplers
• And two toilet flanges with 4 inch (10 cm) diameters are included. PVC glue, two-part epoxy or silicone sealant, a level, and ten wood stakes are all required. 1 in (2.5 cm) thick wood block
• Duct tape
• 4 in (10 cm) ABS detachable cap
• 1 in (2.5 cm) thick wood block

About This Article

wikiHow Staff Writer contributed to this article. This article was written in part by members of the wikiHow Staff. Our highly skilled staff of editors and researchers checks articles for correctness and completeness before publishing them. The work of our editorial staff is regularly monitored by wikiHow’sContent Management Team to ensure that each article is supported by reliable research and fulfills our high quality standards. It has been seen 2,330,388 times since it was published. Co-authors:53 The most recent update was made on January 15, 2022.

Did this article help you?

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

• Inspect and pump your drainfield on a regular basis
• Conserve water
• Dispose of waste properly
• And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order.

Because alternative systems contain mechanical components, it is essential to have a service contract. The frequency with which a septic tank is pumped is influenced by four key factors:

• The size of the household
• The total amount of wastewater produced
• The amount of solids present in wastewater
• The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

• Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
• Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

• Cooking grease or oil
• Wipes that are not flushable, such as baby wipes or other wet wipes
• Photographic solutions
• Feminine hygiene items Condoms
• Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Toilet Paper Must Be Flushed! To understand why the only item you should flush down your toilet is toilet paper, watch this video.

• If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
• Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

• The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed.

Here are some things you should do to keep it in good condition:

• Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.

Garbage Disposal for Septic Systems

Our PickCheck Price is as follows: (Amazon) What if you have an aseptic system instead of a standard sewer system? Can you use your trash disposal then? A septic tank is a waterproof tank that is used to store residential sanitary wastewater underground. Septic tanks are typically seen in rural locations where there are no sewerage systems in place. If your wastewater is being collected and kept in a septic tank, we do not suggest that you use a garbage disposal device. What is the reason behind this?

Recommended disposal for septic systems

When purchasing a trash disposal for a property with a septic tank, you cannot simply purchase any garbage disposal. Purchase one that comes with septic assist, which will help to maintain your septic tank healthy by providing additional enzyme treatment to it. This enzyme treatment is contained within a cartridge that can be linked to a septic assist trash disposal, and just like a printer cartridge, this cartridge will need to be updated on a regular basis to maintain effectiveness. The following disclosure applies: This article is sponsored by readers.

InSinkErator Evolution Septic Assist

With the InSinkErator Evolution Septic Assist, you may have a trash disposal that is specifically designed to work with septic systems in your house. Using this disposer, you may add an automated injection of enzyme-producing microbes to your food waste, which will aid in the breakdown of the food particles in your septic tank much faster. Because of the 3/4 horsepower engine, this InSinkErator is both quiet and powerful. Tip: You may order additional Bio-Charge Cartridge replacements from this page.

• Continous feed type
• Horse power: 3/4 HP
• Speed: 1725 RPM
• Weight: 22.6 pounds
• Warranty: 4-year

InSinkErator Septic Assist Bio Charge Cartridge

• The enzyme treatment with bio-charge has a citrus fragrance to it. With typical use, the cartridge lasts 3 to 4 months (four times longer than conventional treatments)
• It carries 16 ounces of therapy solution in the cartridge bottle. Additionally, you may purchase them in packs of two or four cartridges.

Check for a Discount (Amazon) It is not intended for the decomposition of solid food waste in a septic tank. Recycling.com

More about garbage disposals for septic tanks

Bacteria break down the substance in an aseptic tank. However, because these bacteria are unable of breaking down solids adequately, and food waste is a solid waste, grinding up your food scraps in the garbage disposal will result in the particles being flushed into your septic system. These food scraps will accumulate in the septic tank and expand in volume as a result of the bacteria’s inability to decompose the solid food waste rapidly enough. In other words, the pace of buildup of sludge is significantly faster than the rate of breakdown.

1. Examples include coffee grounds, fruit pits, meat bones, and fats.
2. In this location, the water will be filtered down by the earth and will move towards the groundwater supply.
3. This will prevent wastewater from being discharged into the groundwater.
4. Septic tank with a conventional design |
5. In other words, it has a negative impact on the tank’s overall capacity and efficiency.

In the end, allowing garbage disposal to flow into a septic tank will overload the bacteria in the tank, disturb the tank’s equilibrium, and reduce or completely shut down the tank’s efficacy throughout.

Septic garbage disposals

Septic Assist with the InSinkErator Evolution If you wish to utilize a trash disposal in conjunction with a septic system, we recommend that you purchase a food waste disposal that is specifically developed for this purpose. What distinguishes it from other types of trash disposal is that a septic garbage disposal breaks down food waste while simultaneously releasing specific enzymes. These enzymes aid in the breakdown of solid food waste in the septic tank, allowing it to be processed more rapidly.

Unfortunately, this is not the case.

This is due to the fact that you can only dispose of food waste, which may be broken down rather thoroughly.

Additionally, materials that are not biodegradable at all, such as food packaging, must never be disposed of.

Garbage disposals for dishwashers, farmhouse sinks, and septic tanks

It’s not always possible to simply purchase a trash disposal and put it beneath your kitchen sink to meet your needs. Particularly important considerations for unique types of trash disposals include the following: septic tanks, deep or farmhouse kitchen sinks; and the desire to connect your dishwasher to the waste disposal as well as the disposal.

1. Disposal of waste from dishwashers
2. Disposal of waste from a septic system or septic tank
3. Disposal of waste from deep farmhouse sinks

If you are searching for different sorts of trash disposal systems, you may want to consider the many possibilities for motors, mounts, and feeds, among other things. We also have a page dedicated to this topic, which you can find here.

1. Waste disposal for dishwashers

A dishwasher can be connected to your trash disposal unit if the equipment contains an adapter that allows you to connect the dishwasher hose. The reason for connecting your dishwasher to your food waste processor is, first and foremost, a mystery. A dishwasher cleans your filthy dishes, cutlery, pots and pans, and other kitchen utensils. In addition, a large amount of food waste is flushed down the toilet during the cleaning procedure. In order to avoid blocking your drain pipes, it is recommended that you grind your food waste using a food waste disposal.

Furthermore, it is more practical and space-saving to connect your dishwasher hose to the trash disposal rather than utilizing a variety of drain connection components to bypass the garbage disposal unit.

If you are looking for a budget-friendly disposal and intend to connect it to a dishwasher, double-check that the trash disposal you choose has the essential inlet before making your purchase.

More information about connecting a dishwasher to a garbage disposal may be found here. Alternatively, locate your dishwasher connecting kit.

2. Waste disposal for a septic system or septic tank

What if you have an aseptic system instead of a standard sewer system? Can you use your trash disposal then? Unconnected sewerage systems are most typically utilized in locations where there are no connected sewerage systems, therefore a septic tank is used to store residential sanitary wastewater underground in a waterproof tank. If your wastewater is being held in a septic tank, it is not suggested that you use a regular garbage disposal device to dispose of it. What is the reason behind this?

3. Garbage disposal for a deep farmhouse sinks

Having a deep sink in your kitchen, such as a farmhouse sink, might make it difficult to locate a trash disposal that fits in the limited cabinet space available in your kitchen. Deep sinks or farmhouse sinks already take up a lot of cabinet space, so you’ll need a compact waste disposal that isn’t too tall to fit in the cabinet. So, how tall or how short does the disposal unit have to be to be effective? There should be at least 4 inches of clearance between the bottom of your sink and the floor of your kitchen cabinet when installing a trash disposal (including the mounting bracket).

In order to determine which trash disposal will fit under your traditional farmhouse sink, consider the following: Look over at our list of the top 10 trash disposals for the house, where we propose the small InSinkErator Evolution Compact garbage disposal.

What type of garbage disposal do most people buy?

After all, a specialized waste disposal system isn’t required. The majority of customers purchase a continuous feed trash disposal that generates 3/4 to 1 horsepower; for more information, see our suggestions for strong food waste disposals. These sorts of high-powered trash disposals are capable of handling the majority of food waste and may be utilized for medium- to heavy-duty applications in an ordinary home. Because of the high quality and convenience of installation of the waste disposals from InSinkErator and Waste King, they are among the most often used.

Visit this page to see our comparison of Waste King and InSinkErator garbage disposals.

Check out this link to check the best-selling items on Amazon.

Garbage Disposal GuideTips for buying a garbage disposal

Refer to the Garbage Disposal Guide for further information.

How Septic Tanks work and When to empty them!

In the context of wastewater treatment, a septic tank is an underwater sedimentation tank that uses the processes of biological decomposition and drainage to treat wastewater. Septic tanks provide a safe method of disposing of wastewater and are thus extensively used in regions with a poor drainage system or that are not connected to the main sewage system. Excreta and wastewater are collected in a large underground tank, and they are mostly utilized in rural regions to keep the environment clean.

1. The fundamentals of a residential septic system are as follows: The design of a septic system is straightforward.
2. Two pipelines link the tank to the rest of the system (for inlet and outlet).
3. The outflow pipe, also known as the drain field, is responsible for transporting pretreated wastewater from the septic tank and dispersing it uniformly over the land and watercourses.
4. The top layer is comprised of oils and grease, and it floats above the rest of the waste.
5. The wastewater, as well as trash particles, are contained within the intermediate layer.
6. Bacteria from the wastewater break down the solid waste that accumulates within the tank.
7. Septic tank cleaning is required every few years and is a legal necessity.
8. Many home cleansers cause sludge and solid waste to build up in the septic tank and drainfield lines, causing them to fail.

This results in septic system failure, which is defined as the accumulation of solid waste in the system causing it to overflow into the watercourse or out of the access grating.

Failure in theseptic systemis not only an expensive affair but also an invitation to waterborne diseases, it also smells fowl!

Water treatment in a septic tank is accomplished by the use of biological decomposition and drainage in an undersea sedimentation tank, which collects wastewater. It is extensively used in locations with inadequate drainage systems or places that are not connected to the main sewage system since septic tanks allow for the safe disposal of wastewater. Excreta and wastewater are collected in a large underground tank, and they are mostly employed in rural regions because of their simplicity. Due to the fact that most waste generated in cities and towns is handled with and carried through the sewage system, which is managed by the water company in your local region, septic tanks are rarely utilized in urban settings.

1. Design of a septic system is straightforward.
2. Two pipes run from the tank to the rest of the system (for inlet and outlet).
3. This pipe, also known as the drain field, transports preprocessed wastewater from the septic tank and disperses it uniformly over the soil and watercourses of the surrounding environment.
4. There are oils and grease on the surface of the trash that floats above everything else.
5. Wastewater and waste particles are contained in the intermediate layer.
6. Bacteria from the wastewater break down the solid waste that accumulates in the tank’s interior.
7. Septic tank cleaning is required every few years and is a sanitary necessity.
8. There are several home cleansers that cause solid waste to build up in septic tanks and drainfield lines, which is harmful to the environment.

• One that is licensed to transport all types of garbage
• One that is equipped with the necessary facilities
• One that is registered to treat sewage waste
• And one that is registered to transport hazardous waste.

Get in contact with Waste Disposal Hub to obtain a list of accredited waste treatment firms that can assist you with septic tank removal. Call us at this phone number:02071 128441 or send an email to [email protected] to learn more about our services.

Tips For Using a Garbage Disposal With a Septic Tank

For those of you living in homes that have a septic system, you are undoubtedly already cautious about what you flush down the toilet. This is vitally crucial for the health of the septic tank as well as for preventing blockages, which can be exceedingly nasty and expensive if they occur. The following is a question we see frequently: “Can I use a trash disposal in my kitchen even if I have a septic tank?” We have excellent news for you – sure, you can take advantage of the convenience provided by a waste disposal.

However, it is critical that you utilize it in a sensible manner in order to minimize the strain on your septic system.

Food waste in a septic tank

Always remember that food waste will decompose more slowly than toilet paper, so take this into consideration when you are using your garbage disposal. The more food you throw down the kitchen sink, the faster your septic tank will fill up, potentially necessitating the need to have it pumped sooner rather than later. Organic products such as fruits and vegetables are not harmful to the septic system, but you may want to consider setting up a composting bin to reduce the amount of waste you generate.

How to use a garbage disposal properly when you have a septic tank

If you decide to go ahead and install a garbage disposal, please sure you follow the following instructions:

• It is not acceptable to flush down the toilet any things that do not degrade, such as paper, plastic, glass, metals, coffee grounds, big seeds and nuts, shells, pharmaceuticals, and so on. Keep fibrous vegetables (celery, onions, corn husks) and foods that expand when exposed to water (pasta and rice) out of the compost pile as much as possible. When running the blades, use cold water to harden any grease, fats, or oils that may have gotten into the drain when running the blades. After each usage, wash the blades with dish soap and cold water to remove any residue.

Advantages of a septic-assist garbage disposal

The purchase of a waste disposal equipment that is designed exclusively for septic systems is an additional alternative to consider. This type of trash disposal, which is known as a septic-assist garbage disposal, is distinguished by its somewhat unusual design and the presence of a cartridge that emits a liquid that assists in breaking down food and solid waste, thereby reducing the strain on the pipes and septic tank.

Garbage disposal installation

You should be cautious while using a garbage disposal and septic tank since they might interact negatively. It doesn’t hurt to consult with a competent plumber before proceeding with the installation of one in your kitchen. The plumbing professionals at Reidelt are delighted to provide knowledgeable and courteous service throughout Northwest Indiana and South Cook County in Illinois. Contact us at (219) 322-4906 to make an appointment.

• Category:Garbage Disposal
• Date published: April 30, 2020
• Description:

5 Drain Use Changes to Help Protect Your Septic Tank

It is important to understand that when you flush anything down the toilet, the substance does not just disappear but instead breaks down in your system. Everything is disposed of in a septic tank, where objects accumulate and can accumulate over time. Septic tanks may quickly degrade, become clogged, or otherwise become problematic if they are not properly maintained. Learn how to adjust the way you use your drains, how to prevent septic tank problems, and how to give your septic tank the attention it needs.

1. Garbage from the kitchen sink If we are not careful, the regular usage of our kitchen sink might cause difficulties in our septic tank.
2. If you are cooking foods such as bacon or ground beef, the fat that is drained from the meats should not be flushed down the sink drain.
3. Rather than pouring fat from pans into a container, you may pour the fat directly into a can.
4. Another approach is to let the oils to solidify directly in the pan and then scrape the oils off with a rubber spatula into a trash container.
5. The accumulation will gradually worsen over time, posing a threat to health.
6. It is possible that you will have difficulty keeping waste from running down the drains at times.
7. The filter is installed directly in the septic tank and will aid in the capture of particles and the prevention of their discharge into the septic system.

2.

Unfortunately, there are many objects that are not suitable for a trash disposal system.

The installation of a garage disposal may appear handy, but its use may result in a septic system that is overburdened with waste.

Consider employing a compost bin at your residence as an alternative to disposing of rubbish.

Additionally, you will benefit the environment because you will be helping to prevent septic tank problems while doing so.

Utilization of the toilet Things appear to just disappear when flushed down the toilet, but everything you flush goes right into the septic tank, so be careful what you flush.

Diapers and feminine care products do not properly decompose in the toilet, and even if you flush the things down the toilet, you might cause serious septic system problems.

Swabs of cotton, wrappers, and disposable plastic gloves are among the items on the list.

Due to the fact that latex does not degrade, it can easily stretch out and cause obstructions.

The thickness of the substance in a wipe, even if it is listed as flushable, might cause clogs and will take longer to break down in the septic system.

Arts and craftsIf you enjoy painting and other crafts, the waste from your paints should not be flushed down the drain and should instead be disposed of properly.

The local rubbish station will frequently feature a section dedicated to the disposal of oils and other hazardous materials.

You may then empty the container at a suitable facility and repurpose it for future paint waste.

5.

Cat litter is one of the most common issues that arise when there are pets and septic issues.

If the stink of cat litter becomes an issue, consider putting a trash solution in your garage, such as a sealed container.

Easy Rooter Plumbing can assist you with all of your septic tank requirements. We will assist you in diagnosing and repairing any plumbing or septic tank issues that may arise, preventing the problems from becoming worse in the future.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Mr. Fix-It-Up-For-Us. By understanding how a septic tank works—and what may go wrong with it—you will be able to save a lot of money on septic system maintenance in the future.

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

• A layer of sludge settles to the bottom of the container.
• 4.
• Scum is mostly constituted of fats, greases, and oils, among other substances.
• Grease and oils float to the surface of the water.
• (5) A filter stops the majority of particles from reaching the exit pipe.
• The effluent is discharged into the drain field.
• Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
• The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
• Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank. However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

• Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge.

It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

• Keep the effluent filter in place since it is required by your state’s health law.
• Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
• Your filter, on the other hand, should not require cleaning every six months.
• A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
• A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
• Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.
• More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

You may be able to boost the performance of your system by using a product such as RID-X to introduce bacteria into the system. As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

Regular inspections will cost less than $100 apiece once the initial comprehensive examination by a professional has been completed. It will be possible to learn how a septic tank works from your professional if you have a better understanding of how your system operates. No matter how simple it appears to be, assessing the condition of a septic system requires the expertise of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained properly.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether your state is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

• Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

This device prevents lint from entering the system, particularly synthetic fibers, which bacteria are unable to digest and hence cause infection. Septic Protector is the name I gave to one of these filters that I designed myself. An additional filter is included in the price of roughly $150 plus delivery. See this article for further information on how to filter out lint from your clothes.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.