How To Make Septic Tank Bacteria? (Correct answer)

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

  • Rotten tomatoes are full of Pectinolyc enzymes and good bacteria, which can help increase the bacteria in your septic tank. [ 3] About every 3 months, just squash the rotten tomatoes and flush them down your toilet. Another thing you can try is the so-called Baking soda septic tank treatment.

How do I increase bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

Is it necessary to add bacteria to a septic tank?

Biological additives combine enzymes and bacteria to supposedly enhance the existing biota in septic tanks to provide a start for new systems or to augment stressed systems. For new systems, many people believe you must add bacteria. While septic systems require bacteria to work, no special bacteria need to be added.

What bacteria is used in septic tank?

Inside the septic tank itself, where less air is available, anaerobic bacteria are the main type of bacteria that break down the effluent. These bacteria can decompose solid waste by eating it. Single-celled creatures known as protozoa play a role in your wastewater treatment as well.

How can I increase bacteria in my septic tank naturally?

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

  1. Regularly inspect and maintain your septic system.
  2. Pump your septic tank as needed.
  3. Keep your septic tank lids closed and secured.
  4. Be water-wise.
  5. Direct water from land and roof drains away from the drainfield.
  6. Landscape with love.
  7. Keep septic tank lids easily accessible.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How often should I add bacteria to my septic tank?

When solids enter the tank, they settle to the bottom and collect there. Over time, those solids will start to build up. This is why the tank needs pumping every three to five years — because the solids in the tank always rise to the top.

Should I add chemicals to my septic tank?

Chemicals and other additives promoted to keep a septic system “healthy” or “free-flowing” or “nourished” are generally not required nor recommended by any known expert sources.

Can you put too much bacteria in a septic tank?

Too much of a good thing can cause problems. A septic system relies on the correct balance of bacteria to do its job. An overpopulation of bacteria can deplete the oxygen in the septic tank and turn the environment septic. A septic, septic system is one in which the ecosystem within the tank is out of balance.

Is beer good for septic tanks?

Do not flush meat, buttermilk, yeast, vegetables, beer etc. down your drain to “Feed” your septic system. This will kill the good bacteria in your septic system.

Is milk good for septic tanks?

If not the trash. A man who has a septic tank service told us to buy a gallon of whole milk and let it go bad a few days and flush it into the septic tank to feed the bacteria. He said to do this about once a month.

Do I need to add enzymes to my septic tank?

But septic tanks don’t really need help from extra additives. As long as you are only putting wastewater and toilet paper down the pipes, the tank can take care of its job on its own. Putting anything extra in can cause more harm than good and it’s best to stick to the tanks natural ecosystem when possible.

What happens to poop in septic tank?

The inlet pipe collects the water waste in the septic tank, long enough that the solid and liquid waste is separated from each other. Inside the tank bacteria from the wastewater breaks down the solid waste. These bacteria decompose the solid waste rapidly allowing the liquids to separate and drain away more easily.

Is Epsom salt okay for septic?

While Epsom salt doesn’t cause damage to your septic tank, this doesn’t necessarily mean you should go flushing it into your tank. Many individuals think flushing Epsom salt in their septic tanks will break down waste. While salts can unclog a toilet, the effect Epsom salt has on your septic system will be minimal.

How to Make Your Own Septic System Treatment

You may make your own natural septic tank treatment in the comfort of your own home. Featured image courtesy of John Keeble/Moment/Getty Images When it comes to disposing of household waste, many residences throughout the world rely on septic tanks rather than municipal sewage systems. It is critical that you take adequate care of your septic system in order for it to continue to function correctly. However, many people feel that certain septic system treatments are too costly, too inconvenient, and too potentially unpleasant to use on their tanks.

Using naturally occurring bacteria and enzymes to break down household waste, septic tank treatments are effective.

It also contributes to the maintenance of a healthy bacterial level in your septic tank.

Some, on the other hand, believe that these treatments are prohibitively costly and that they might be dangerous if they infiltrate the water system.

Making Homemade Septic System Treatments

Because of the safety issues around treatments such as Rid-X, some septic tank users have resorted to manufacturing their own septic system remedies. They have the potential to be more environmentally friendly while also providing more value for money. The majority of these therapies are based on the presence of active yeast. A way of balancing the bacterial levels inside a septic system, yeast can be used alone or in combination with either sugar or cornmeal, depending on the application. According to Septic Tank Care, combining 3 cups of warm water, 2 cups of sugar, 2 cups of cornmeal, and 2 packets of yeast in a big bucket then, after the mixture begins to bubble, putting it into your toilet and flushing twice is the best way to clean your tank.

According to the Old Farmers’ Almanac, utilizing yeast to maintain a healthy bacterial balance in your septic tank is an excellent method to keep your tank running smoothly.

Within eight hours of flushing, refrain from taking long showers, washing laundry, or flushing your toilets more than once in one day.

Septic Tank Maintenance Tips

In addition to regular monthly septic tank treatments, there are a variety of different methods for keeping your septic system in good operating order. You should get your system pumped out on a regular basis to keep a backup from forming. The Environmental Protection Agency of the United States urges people who use septic tanks to be cautious about what they dump down their drains. While it may seem apparent to keep tampons, menstrual towels, and any wet wipes out of your septic tank, it is also critical to keep oils, grease, and food waste out of your garbage disposal to a bare minimum.

Employing a drain snake or plunger to attempt to remove a clog is preferable than using chemicals to dissolve it if you do discover a clog in a drain pipe.

Septic tanks may be a dependable and safe means of disposing of home waste; nevertheless, they must be managed with care in order to remain safe and effective over time.

DIY Septic Tank Treatment

Septic tank systems are notoriously difficult to maintain and may be quite expensive when they fail. Over the course of almost two decades, we’ve only had to pump our septic tank once. Here’s how we maintain our system running smoothly: DIY Septic Tank Treatment

Natural Enzyme Action

Septic tanks, like your stomach, require the presence of beneficial bacteria and enzymes in order to break down the particles that travel through them. It is possible to obtain these helpful bacteria and enzymes from a variety of sources, but one of our favorites is rotting tomatoes. These naturally occurring enzymes are proteins known as Pectinase or Pectinolytic enzymes, and they break down pectin. Lipase, hydrolyzes, and lyase are all members of the pectinase family of enzymes that are capable of breaking down pectin and plant cell walls in the natural environment, therefore aiding in the decomposition and recycling of waste plant materials.

DIY Septic Tank Treatment

It is simple and inexpensive to treat a septic tank with DIY solutions. We “feed” our septic tank 3-4 rotting tomatoes every 3 months or so, which we do through our garbage disposal. The idea is to make sure that you split up the tomato and pass only half a tomato or so at a time through the water while it is running to ensure that it is properly flushed out. As an alternative, if you don’t have access to a garbage disposal, you may throw two or three large rotting tomatoes in a bag (chances are they’re already packed away in a bag in your refrigerator and starting to liquefy anyway!).

Dump them into a toilet (but don’t use bleach!) and flush them away.

Normally, having rotten tomatoes every few months isn’t a big deal because the garden overproduces in the spring, summer, and fall, and there are always a few extras available.

At the very least, they aren’t going to waste completely.

Toilet Paper No-No’s

When we had our septic system pumped for the first time in more than two decades, we were assured that it was totally unnecessary because the system was operating well and looked fantastic. During our conversation, the gentleman shared numerous true horror stories of systems he’d witnessed at his place of employment where the families utilized “fluffy” toilet paper. That one where the cute little bears in the advertisements are pleased of themselves for not having any lint left behind? You know the one I’m talking about.

Image courtesy of Ian Haycoxis (CC BY-NC-ND 2.0).

He especially inquired about the brand of tissue we use, which is Scott Tissue.

It degrades swiftly and does not “glop” into a clog-inducing mass on the lines. Alternatively, if you don’t happen to have any rotting tomatoes on hand, you may use baking or brewing yeast to bring healthy bacteria to your tank as an alternative.

How to Clean Septic Tank Naturally

Yeast and sugar are excellent natural septic tank cleaners, and here’s an easy method for using them.

Septic Tank Cleaner

2 cups granulated sugar 5 cups of hot water (optional) 3 tbsp. active dry yeast Sugar and yeast should be dissolved in water. Pour the mixture into a toilet (that does not contain bleach!) and flush it. This is best done at night so that the yeast can continue to work throughout the night; do not flush for at least 3 hours after completion.

Additional Tips:

1Avoid flushing raw or cooked meat down the toilet, down the garbage disposal, or any other form of introducing meat into your septic system; meat is NEVER a helpful bacterium. 2. Never add oils, grease, or fat in any form (solid or liquid) to your tank. This includes, but is not limited to, cooking oils, bacon grease, meat grease from draining ground beef/turkey, and other fat-containing foods. 3Avoid flushing anything other than garbage and toilet paper down the toilet; this means that feminine products should be disposed of in the trash, baby diapers and wipes should be disposed of in the trashcan, and so on.

Have you tried the rotten tomato technique yet?

Love this DIY Septic Tank Treatment Idea? Pin it!

Without the proper knowledge, septic systems may be difficult to keep up with and manage. If you suspect that your toilets aren’t flushing properly or that your pipes may need some cleaning, you should avoid introducing harsh chemicals into your septic system since they can disturb the naturally existing biome of bacteria that is necessary for the system to work effectively. Our team at Fagone Plumbing was inspired to publish a blog post that would teach readers how to add a natural cleanse to their septic system without endangering the system’s performance.

Simple, Quick Cleanse

This procedure is a quick, mild remedy that is also effective. It is very simple to use. It is necessary to use the power of baking soda, vinegar, and lemon to achieve success with this procedure. Starting with a quarter-cup baking soda and a half-cup vinegar mixture, pour it directly into the toilet. Repeat this process several times. After that, squeeze in two teaspoons of lemon juice. A chemical reaction occurs when the baking soda and vinegar are mixed, resulting in a fizzing sound and the breakdown of grime and debris.

Following a flush, this solution will clean the inside of your toilet bowl and the pipes that run through your system as a result.

Homemade Septic Tank Treatment

As previously stated in this article, healthy bacteria are required to guarantee that your septic system is operating effectively. Because of the bacteria in your system, sediments are broken down more quickly, allowing for simpler movement to the leach field. In addition, it is beneficial when it comes time to have your septic system pumped. The following are the elements that will be necessary for this natural solution: Water, sugar, cornmeal, and dry yeast are the main ingredients. Prepare the combination by first heating around a half gallon of water until it comes to a boil.

  • Because the sugar will function as the initial food source for your bacteria!
  • Allow the cornmeal to absorb the water before mixing everything together until it is well mixed.
  • Once everything has been blended, pour the mixture into the toilet and flush it.
  • That way, you may be certain that the mixture is pushed all the way into your septic tank.

Upon completion of this treatment, your tank should have returned to a healthy bacterial environment. It is recommended to give these cleanses every 6 months or so, but only if you feel that there is a shortage of microorganisms in the system.

Fagone Plumbing Can Help!

If you have any reason to believe your septic system may be performing better, give Fagone Plumbing a call right away! It doesn’t matter if it’s a bacteria problem or something else; we will be able to assess the problem and deliver the most cost-effective solution to get your septic system back up and running correctly!

See also:  How Much Does It Cost To Get A Septic Tank In Alabama? (Correct answer)

Maintain Your Septic System Naturally

Immediately contactFagone Plumbing if you believe your septic system may be performing better. It doesn’t matter if it’s a bacteria problem or something else; we will be able to assess the problem and deliver the most cost-effective solution to get your septic system back up and running again!

A Well-Functioning Septic System

The title of this article may be “The Care and Maintenance of the Gut in Your Yard,” which would be more descriptive. Understanding the necessity and advantages of eating dietary fiber, alkaline-forming foods, and taking probiotics for your own gut health will help you recognize the similarities between keeping a healthy septic system and maintaining a healthy digestive system. There are some items that you should avoid putting into any septic system, just as there are certain substances that are favorable to putting into our own digestive systems.

If you wait until there is a problem, you have waited too long and should contact a septic cleaning firm to pump your tank immediately.

Septic System Care and Maintenance Tips:

  • A family of four living in a house with a 1,000-gallon tank should have their septic system cleaned every four years, according to the EPA. Inquire with your local septic cleaning firm about how frequently you should contact them
  • Avoid using bleach-containing solutions to clean your toilets since it kills the bacteria that are necessary for the breakdown of waste particles in your septic system. Try this all-natural toilet cleanser
  • It works great.
  • When you add yeast to your septic system, it helps to aggressively break down waste particles, which is beneficial. Using the first time, flush a 12-cup package of dried baking yeast down the toilet. After the initial addition, add 14 cup of instant yeast every 4 months for the next 4 months. For those who are planning to install or have their existing septic system pumped, it’s a good idea to know precisely where it is in your yard so that you don’t have to dig up a lot of your lawn when the system is pumped in the future. With a tape measure, measure the precise distance between the septic tank lid and the home, and then snap a photo of the exact distance with your mobile phone to prove you were accurate. Maintain a copy of the snapshot in a home maintenance file on your computer for future reference.
Deborah Tukua

Deborah Tukua is a natural living and healthy lifestyle writer who has written seven non-fiction books, including Naturally Sweet Blender Treats. She lives in Hawaii with her family. Since 2004, she has contributed to the Farmers’ Almanac as a writer.

Keep Exploring

Are you interested in making your own septic tank treatment at home? Septic tanks are often constructed of concrete, however they can also be constructed of fiberglass. Your septic system is designed to manage enormous amounts of waste, therefore any poisonous or unclean waste, such as cleansers and bleaches, will be treated without issue by your system. Your septic tank should function effectively as long as you provide adequate care and maintenance on a regular basis, as well as seeking expert assistance when you are unable to solve a problem on your own.

Possible Issues

What often causes difficulties with your system is a lack of microbial activity, which means that there are not enough beneficial bacteria present in the tank. The microorganism works as an agitator, allowing waste materials to be broken down as they accumulate in the tank. This enables the system to run at its most efficient possible. Keeping healthy microbial activity in the tank is therefore essential, and there are a variety of treatments available to assist you in accomplishing this goal.

This, of course, has the potential to be harmful to your system.

So, what is the best way to get past these difficulties?

What’s nice about using an all-natural solution is that you can use it as a highly effective treatment for your tank while also using it as a fantastic cleanser for your entire system.

Scheduled treatments will aid in the elimination of odor, the appropriate breakdown of solids by your system, and the restoration of healthy bacterial activity, all of which will aid in the cleaning of your drain and the prevention of backups in your system.

Step 1 – Boil Water

Bring a half-gallon of water to a boil in a large saucepan. Add in about two and a half cups of sugar and mix until the sugar is completely incorporated. Allow for cooling of the mixture.

Step 2 – Add Cornmeal

Once the water has reached room temperature, stir in 2 1/2 cups cornmeal and allow it to settle for a few minutes before using.

Step 3 – Add Dry Yeast

Add four packages of dry yeast to the mixture and stir thoroughly to ensure that all of the ingredients are thoroughly combined.

Step 4 – Pour the Solution in the Toilet

Pour the liquid into the toilet and flush it down the toilet. When the toilet tank is almost completely full, flush it once more. Without flushing the toilet, let it sit for around 6 to 8 hours at a time. You will have your septic tank treated in no time if you follow the instructions outlined below.

Homemade Septic Tank Treatment: How to Maintain Your Septic System

Septic tanks, rather than sewage systems, are used by many residences all over the globe to dispose of domestic waste and waste water. You must take good care of your septic tank in order for it to continue to perform properly, as a well operating septic tank system is necessary for every household. When it comes to homemade septic tank treatment, you have a wide range of solutions at your disposal. Special septic tank system treatment agents may be purchased to keep your septic tank in good working order, but many people find them to be prohibitively expensive, cumbersome, and possibly aggressive.

Here is an example of an easy-to-make septic tank treatment that you may apply in your own home.

Meat is by no means a bacteria that is helpful.

Self-made septic tank system treatment method

You may really make arrangements for the treatment of your septic tank system on your own. This method will be more ecologically friendly and will deliver greater value when it comes to DIY septic tank treatment. The majority of these therapies are based on the presence of active yeast. Yeast, whether used alone or in combination with sugar or cornmeal, can help to maintain a healthy balance of bacteria in the septic tank system. Notes:Always avoid putting any type of oil, fat, or grease to the tank, regardless of how it is packaged.

Most Popular Method

Using this approach, you’ll need to combine three cups of warm water, two cups of sugar, two cups of cornmeal, and two packets of yeast in a big bucket and let it sit overnight. Then, as soon as the mixture begins to bubble, dump it into the toilet and flush it two or three times. It simply needs to be installed in a toilet since it is designed to work with the entire water tank, not only the drainage system, as previously stated. Tips: Avoid taking long showers, washing clothes, or flushing the toilet more than once within 8 hours of flushing the toilet.

Alternative Method

The use of yeast and sugar, as previously stated, is quite efficient in the natural cleaning of septic tank systems. Here is a straightforward method of employing them. Two cups of brown sugar, five cups of warm water, and three teaspoons of brewer’s yeast are required for this recipe. Do not use bleach in any way.

Then, dissolve the sugar and dry yeast in the water and set aside. Tips: Pour the liquid into the toilet and flush it down the toilet bowl. It is better to do this at night so that the yeast may continue to operate overnight without being flushed for at least 3 hours thereafter.

How to Treat a Septic Tank with Baking Soda?

In addition to being rapid, this strategy is also quite effective. Baking soda, vinegar, and lemon are the ingredients you’ll need for this method. To begin, combine one-fourth cup baking soda with half-cup vinegar and pour the mixture directly into the toilet. After that, squeeze in two teaspoons of lemon juice. When baking soda and vinegar are combined, a chemical reaction occurs, which heats the mixture and aids in the breakdown of grime. With the acidity of the lemon, it facilitates this process while also emitting a lovely scent.

Because it is an all-natural remedy, it will not affect the beneficial microorganisms in your body’s immune system.

How to Increase Bacteria in a Septic Tank Naturally?

Septic tanks, like your gut, require the presence of beneficial bacteria and enzymes in order to break down the solid debris that goes through them. These naturally occurring enzymes are proteins known as pectinase or pectinase enzymes. If you’re not familiar with the term, pectinase is really a collection of enzymes made of lipase, hydrolase, and lyase that can naturally dissolve pectin and plant cell walls, therefore assisting in the decomposition and recycling of plant waste. It is possible to obtain these helpful bacteria and enzymes from a variety of sources, but yeast is our preferred and most effective source.

In order to maintain optimal performance, it is advised that you flush 1/2 cup of active yeast down the toilet and then add another 1/4 cup every four months after that.


You may find it difficult to keep your septic tank system up to date if you have no clue what you’re doing or where you’re going. It is best not to flush anything into the toilet tank other than rubbish and toilet paper. That is, if you have any form of feminine items, dispose of them in a garbage bin. Baby diapers, moist tissues, and paper towels are the only items that can be disposed of in the garbage. For the simple reason that, while these personal wipes claim to be safe for septic tanks, they take an extremely lengthy time to degrade.

If you believe that your toilet is not flushing properly or that your pipes can be cleaned, see a professional immediately.

Making A Homemade Septic Tank Treatment

Keeping a septic system in good working order requires frequent attention and maintenance. Septic systems should be maintained on a regular basis to ensure that they last as long as possible. Making your own DIY septic tank treatment might go a long way toward accomplishing this goal. Those who reside in larger cities with common sewage systems do not have to be concerned about the health of their septic waste, which is a relief for them. People who live outside of city borders or in small towns and villages, on the other hand, are not so fortunate, and they must make the investment in septic tanks.

The anaerobic bacteria in a septic tank are the most essential contributors to the overall health and lifespan of the system.

That is one of the primary reasons why you should learn how to construct your own DIY septic tank treatment.

The option of purchasing a commercial treatment is always there, but learning how to prepare one on your own will almost certainly prove to be more handy than dashing to the shop for supplies. In addition, the components are straightforward and readily available in most households’ kitchens.


You’ll require the following items:

  1. 2 sachets of active yeast granules or a 1 inch cube of moist yeast are required. 2 cups confectioners’ sugar (or powdered sugar) (preferably brown sugar) In addition to being an excellent antiseptic, activated yeast has other benefits. Optional ingredients: 1 cup of cornmeal (optional)
  2. 8-10 cups lukewarm water

The Recipe is as follows:

  1. If you’re using dried yeast, simply combine it with the sugar and cornmeal until well combined. Pour in the lukewarm water and whisk vigorously to ensure that there are no lumps or solid particles in the mixture. You may use wet yeast instead of dry yeast by dissolving the cube in roughly a cup of water and breaking it with a fork or the back of a potato masher until it completely dissolves. Combine the sugar and cornmeal in a large mixing bowl, then pour in the remaining lukewarm water and stir in the dissolved yeast mixture. Set aside for approximately half an hour in a warm location to allow the flavors to blend together. During the fermentation process, a thick frothy layer will grow on the surface of the liquid. Before you pour in this mixture, flush the toilet one more. To put it simply, this is done to flush off the residue left behind by chemical cleansers in the toilet bowl. In order to finish, pour in the yeast mixture and flush it down with a pail of warm water
See also:  How Far Away Septic Tank From House? (TOP 5 Tips)

Additional Suggestions

  1. You should avoid using any chemical toilet cleansers for at least 24 hours before and after using any homemade or store-bought treatment, regardless of whether you’re using homemade or store-bought therapy. Chemical cleansers may be harsh on yeast cells, causing them to die before they have a chance to perform their functions. If, on the other hand, you’re using one of the organic toilet cleaners, you shouldn’t have any problems. Following the addition of the yeast mixture, you should avoid allowing too much water to flow into the septic tank for a few hours, since this will cause the yeast cells to operate more slowly. You should repeat the process at least every six months, but if you have strong odor or obstructions, you may need to perform it more regularly.

After learning how simple it is to manufacture your own DIY septic tank treatment, you will no longer need to spend money on purchasing it from a store or online vendor. Follow this method on a regular basis to ensure that your septic system is clear of complications. Personal Experience is used as a point of reference.

Septic Tank Bacteria: What You Need to Know

In the case of a new septic tank owner, or if you’re just not familiar with the way your septic tank operates, you may not be aware of the importance of bacteria and how it affects your septic tank’s operation. Bacteria contributes to the proper operation of your septic tank over time. Your septic tank would most certainly jam up very fast if there were no microorganisms present. By following proper septic tank management procedures, you may encourage the growth of beneficial bacteria. The way you utilize your septic tank, as well as the items you flush down your drains, can have an influence on how well it functions.

Why Is Septic Tank Bacteria Important?

Solid waste is continuously drained down the drain to the septic tank. Whenever solids are introduced into the tank, they sink to the bottom and accumulate there. Over time, such sediments will begin to accumulate in the sewer system. In order to prevent this, the tank must be pumped every three to five years since the solids in the tank always ascend to the top of the tank. If the solids reach the drainfield pipe, which is located towards the top of the septic tank, microscopic particles will be released into the drainage system.

Bacteria reduces the amount of bacteria that accumulates at the bottom of the tank.

Whenever the liquids in the tank reach the drainfield, they are securely discharged into the yard and do not become clogged.

What Can You Do to Promote Septic Tank Bacteria Growth?

Septic tanks inherently contain bacteria that will develop and multiply. By draining more solid waste down into the tank on a consistent basis, you encourage the growth of bacteria. However, there are several things you can do to your septic tank that will help to slow the spread of germs. All of the items meant to kill bacteria such as antibacterial soaps, bleach, antibiotics, and other products designed to kill bacteria have the potential to enter your tank and harm some of the beneficial bacteria in your tank.

It is possible that you may need to alter the way your family operates in order to prevent flushing these items down the toilet.

Before washing soiled garments, soak them in vinegar for a few minutes, and mix baking soda into your laundry detergent before putting it in the machine.

If you require a secure location to dispose of your medication, consult with your doctor to determine where you may properly dispose of your medication waste. It’s possible that your doctor is aware of medicine-recycling activities taking place in your neighborhood.

Do You Need to Put Bacteria In Your Septic Tank?

Some firms manufacture bacteria that may be added to your septic tank in order to support good functioning of the system. However, if you follow the instructions to the letter, microbial additives should not be required. Assuming you keep the amount of bacteria-killing agents and chemicals in your drains to a minimum, your tank should have enough bacteria to perform its functions. Whether or not you decide to employ septic tank bacteria, you should check with your local sanitation authorities to see if any chemicals or other materials are prohibited from being flushed down the toilet.

If you’re not sure which septic tank bacteria firms are the best, ask the specialist who pumps your septic tank for a suggestion.

Al’s Septic Tank Service is delighted to speak with you about septic tank bacteria and other septic tank-related issues.

To learn more, please contact us immediately.

Homemade DIY Septic Tank Treatment (Simple At-Home Recipe)

Bacteria are manufactured by certain firms and may be added to your septic tank to enhance proper operation. In most cases, microbial additions should not be required if you follow all of the recommended procedures. Given that you keep the amount of bacteria-killing agents and chemicals in your drains to a minimum, your tank should have enough bacteria to perform its functions. Regardless of whether you want to utilize septic tank bacteria, you should check with your local sanitation authorities to see whether any chemicals or other materials are prohibited from being flushed down the toilet.

Consult with the professional who pumps your septic tank if you’re unsure which septic tank bacteria firms are the ideal choice for your needs.

Septic tank bacteria, as well as other septic tank-related concerns, are something we are pleased to discuss with you at Al’s Septic Tank Service.

DIY Septic Tank Treatments

Homemade treatments like these are becoming trendy these days. The fundamental concept is that it is a low-cost alternative to purchasing store-bought treatments for adding live bacteria to your aquarium. Several of those products are distinguished by the use of enzymes that are especially designed to break down fats, oils, and grease as their primary selling feature. Others may be added with the particular purpose of breaking down cellulose (from toilet paper fibers). Consequently, while the yeast may not be as comprehensive a remedy as something like Rid-X, it would serve as a means of introducing living cultures to your tank.

Boil ½ gallon of water. Add 2 cups of sugar.

Do this before leaving for work or going to bed for the greatest outcomes, since this will prevent you from adding a huge volume of water to the septic tank for the next few hours (laundry, showers, toilets). According to this article in the Farmer’s Almanac, you may just dump 1/2 cup of yeast down the toilet and flush it away!

Certainly a more straightforward technique, albeit the addition of sugar and cornmeal appears to encourage a more active development of bacteria. Although, once the tank has been emptied, I assume the yeast will feed on the solid waste that has accumulated there.

2) Rotten (Over-ripe) Tomatoes (Unnecessary)

Do this before leaving for work or going to bed for the greatest outcomes, since this will prevent you from adding a huge volume of water to the septic tank for several hours (laundry, showers, toilets). Apparently, according to this article in the Farmer’s Almanac, you may just dump 1/2 cup of yeast down the toilet. Even if the sugar and cornmeal appear to stimulate more active bacterium creation, that is unquestionably a far more straightforward option. After the tank has been flushed, I assume the yeast will feed on the solid waste that has accumulated.

Raw Meat (Myth)

This is a long-standing fallacy that we continue to hear people repeat over and over again. I recently spoke with a septic tank specialist in Upstate New York who has been pumping septic tanks for over 30 years and who revealed that he has customers who continue to flush raw meat down the toilet even after being informed that this will not improve anything. The notion is that introducing raw meat will “activate” the bacteria in the tank, causing the breakdown of the solids in the tank to occur more quickly and efficiently.

  1. Rotting meat will add unneeded solid waste to your tank as well as foreign germs, which might pollute your system by spreading the undesirable bacteria into your effluent and into your groundwater, which could be a health risk to you and your family.
  2. The bottom line is that you should not dump ground chuck or any other meat into your septic system.
  3. We were on the outskirts of town, officially just outside of town but still inside the boundaries of the rural incorporated township.
  4. Because we were a large family with seven brothers and sisters, we had a lot of laundry, a lot of dirty dishes, and a lot of baths to deal with (and the toilet got flushed a LOT).
  5. We utilized toilet bowl cleansers that were safe for septic systems.

Growing up in the 1970s (before the Internet), my parents didn’t have a lot of knowledge at their disposal, but it was considered relatively common sense, and all of our neighbors had septic tanks as well: Tampons and maxi pads were not flushed, and we scraped all food scraps from our plates with a rubber spatula before washing dishes (food waste was collected in a small tub and later added to the compost pile).

  • We only put things in the laundry bin-clothes that were really dirty-and helped dolaundry throughout the week- rather than letting it pile up and doing several loads on the weekend-and used plant-based laundry detergents like these that are safe for the environment.
  • In addition, my parents did not have drain cleaners, bleach, or other harsh chemicals in the house.
  • Click here to discover a homemade laundry detergent recipe that just requires three ingredients.
  • According to what I’ve read, folks are putting all kinds of items in their septic tanks to “activate” them.
  • My grandparents’ farm was completely self-sufficient, and my grandmother produced all of her own soap, shampoo, and laundry detergent from scratch.
  • Without even realizing it, they were far more environmentally conscious than even the most devoted Whole Foods consumers today.and they did it without even considering it from that perspective; it was just plain sense at the time.

The land is being prepared for the installation of a new cement septic tank (treated with single-cell foam to prevent freezing). Image credit for the featured image: Wayne Feiden is an American actor and director. Septic Tank Treatment – 1 Year Supply of Dissolvable Easy Flush Live Bacteria Packets (12 Count) – Best Way to Prevent Expensive Sewage Backups – Made in USA : Health & Household

Q:Can you tell me about the substances in this product? A:Our treatment packages are made entirely of natural ingredients, including billions of bacteria cultures that have been carefully chosen to create enzymes that break down solid waste. There are no dangerous ingredients in this product! Q:How many packs should I use for my project? A:1 per month is sufficient for the majority of households. If your tank holds more than 1000 gallons or your home has more than four bedrooms, we recommend two cleanings every month.

  1. In fact, our treatment packs not only keep proactive bacteria and enzymes active in your septic tank, but they also assist to clean the lines leading to the tank and the drain field beyond it as well.
  2. Is it necessary to include septic treatment?
  3. Antibacterial soaps, strong detergents, and even fabric softeners can kill beneficial bacteria that are necessary for the breakdown of substances in the environment.
  4. Q:Does it work for people who travel by RV?
  5. We supply billions of bacteria to break down particles, accelerate anaerobic digestion, and minimize odor in any holding tank.

How to make DIY septic safe products

The majority of industrial cleaning solutions are formulated with poisonous and harsh chemicals that are harmful to the septic tank’s environment. This is due to the fact that the harsh chemicals can either impede or completely eliminate the beneficial microorganisms in the septic tank. For example, commercial toilet bowl cleaners are often made with bleach and hydrochloric acid as active ingredients. The acid is employed in cleansers because it is extremely effective in dissolving calcium carbonate, which is present in a lot of wastewater.

In order to prevent the liquification of organic waste in the septic tank, it is in your best interest to only use items that are septic-safe in nature.

DIY septic safe toilet bowl cleaner


  • 1 cup white vinegar
  • 12 teaspoon tea tree essential oil (or any other pure organic oil)
  • 12 cup baking soda

one and a half cups of baking soda; one and a half teaspoons of tea tree essential oil (or another pure organic oil); one and a half cups of white vinegar

Making stronger DIY septic safe toilet clean (for stubborn stains)


  • 1 cup of white vinegar
  • 34 cup of baking soda
  • 20 drops of tea tree essential oil (or any other pure organic oil)

In a spray bottle, combine the components and spray the interior of the bowl with the resulting cleaner to disinfect it.

In order to remove persistent stains, spray the bowl and allow it to sit for a few hours – or even overnight – before scrubbing it clean with warm water and rinsing well.

DIY septic safe drain cleaner


  • 12 cup baking soda, 1 cup white vinegar, 1 gallon of boiling water, and a quarter lemon are all you need.

Using a funnel, pour in the baking soda followed by the vinegar, and then wait a few minutes for the combination to froth in the system before adding your hot water to the drain. Once a week, you may apply this drain cleaning technique to keep your drain from becoming clogged.

DIY septic-safe bath and tile cleaner

When it comes to cleaning the bath and the tiles, there are five different natural solutions that you may employ to do the task. These are the ones:

  • Use baking soda in the same manner that you would scouring powder, and then massage with a moist sponge to remove any remaining baking soda. It should be completely rinsed with clean water. Cleaning your bathtubs with vinegar and baking soda – If you have film accumulation on your bathtubs, soak a sponge in vinegar and then clean the bathtub, paying particular attention to the problem areas
  • Use vinegar to eliminate filth and grime without the need for scrubbing, and it does not leave a film behind. 14 cup of vinegar for every 4 liters of water is a good ratio, but you can increase the quantity of vinegar if you are dealing with very persistent stains. Baking soda – When cleaning grout, baking soda is an excellent choice. 3 cups baking soda should be poured into a large mixing basin, followed by 1 cup warm water. Mix thoroughly until you have a smooth consistency, and then clean the grout with a toothbrush or a sponge to remove any remaining residue. Lemon – you may also rub lemon juice into the problem region and then rinse it well with water before drying it with a soft and clean towel.
See also:  How Much Drian Line Do I Need For Septic Tank? (Solved)

DIY septic safe cleaner for showerheads

Showerheads may be cleaned effectively with vinegar and water. The manner in which you combine these materials will, however, be determined by the type of showerhead you have.

  • In order to clean metal showerheads, combine 12 cup white vinegar with a gallon of water, submerge the showerhead in the solution, and bring it to a boil for 15 minutes. As a result, any deposits that may have accumulated in your metal shower head should be removed. In order to clean plastic showerheads, combine one part vinegar with one part hot water, then submerge the showerhead and allow it to soak for at least one hour.

DIY septic safe laundry detergent


  • Soap (e.g., Dr. Bronner’s, Ivory, etc.)
  • Washing soda
  • Natural unscented bar soap

Grate your bar soap or blend it in a food processor to make it easier to use. As soon as you’ve finished, combine 2 parts washing soda with 1 part grated soap and store the mixture in a tightly sealed jar. It’s time to put your soap to work — you may use 2 teaspoons to a quarter cup for each load of clothing you wash.

For making liquid septic safe soap

Grated soap should be placed in a pan with 2 quarts of water, and the water should be gradually heated while stirring the soap until it dissolves. After it has dissolved, combine 4.5 gallons of hot water and 2 cups of washing soda in a bucket, stirring constantly, until everything is well mixed. After that, you may transfer the soap mixture to a larger bucket, stir it again, and then cover it and let it for at least an hour. After it has been allowed to settle overnight, mix it again until it has a smooth consistency, and then pour it into other containers.

An alternative to DIY cleaning products

Grated soap should be placed in a pan with 2 quarts of water, and the water should be gradually heated while stirring until the soap is dissolved. 4.5 gallons of hot water and 2 cups of washing soda are added to a bucket and stirred until well combined after it has dissolved. Afterwards, you may transfer your soap mixture to a larger bucket, stir it again, and then cover the bucket and set it aside for the night. It is best to mix it again until it has a smooth consistency after it has rested overnight before pouring into more containers.


Cleaning goods are limited in their selection for septic system owners, who do not have the luxury of choosing. Surfactants, quats (quaternary ammonium compounds), hydrochloric acid, and other chemical products that are very hazardous to bacteria are found in the majority of commercial cleaning solutions. You should refrain from using such goods since they will endanger the health of your septic system and should be avoided. DIY septic-safe products, such as the ones mentioned above, can be created at home, or you can purchase pre-made biological cleaning agents.

How biological septic tank additives are made

Biologically, the vast majority of bacteria are heterotrophic, which means they rely on an organic substance for both food and energy. Some strains require additional nutrients, like as vitamins, to be included in their meals. In order to create bacteria, it is necessary to provide them with a proper physical environment that is beneficial to their growth. The pH, temperature, oxygen, and supply of sustenance in the environment must all be in the proper range. A variety of bacteria perform a variety of activities, and not every bacterial strain is beneficial in the septic system.

It is necessary to manipulate microbial strains in order to improve their technical properties in the course of manufacturing biological additives. Plants, soil, and rodents are the primary sources of the bacterium strains studied.

Methods of making biological additives

The bacillus strain used by Bio-Sol is chosen because of its exceptional performance in wastewater treatment. As a matter of fact, this is the same type of bacteria that is used for industrial wastewater treatment before it is discharged back into the environment. Bacillus is a facultative anaerobic bacteria that can survive in low-oxygen settings or even habitats with no oxygen. These bacteria have also been shown to have high flocculation and cohesiveness, which can aid in the improvement of the sludge settlement process.

The refinement and isolation of pure cultures, as well as the screening of preliminary organisms, are all required steps in the bacterial strain selection procedure in order to find those with the most potential.

A number of objectives are achieved by strain selection, including an increase in the density of beneficial bacteria, which in turn results in an increase in the total rate of organic waste removal in the system.

For starters, in order to obtain pure cultures, the singe-colony bacillus is separated by streaking vegetative cultures on nutrient agar plates, which is done in order to obtain pure cultures.

Liquid fermentation

Submerged liquid fermentation has been around since the 1930s and is still in use today due to its efficiency in the development of enzymes generated from microorganisms today. This procedure is referred to as submerged liquid fermentation because the substrate that is utilized is kept in a liquid condition and so contains all of the nutrients necessary for the fermentation process. The liquids utilized in this method include alcohol, oil, yogurt, and other similar substances. Selecting the optimal strain and substrate for liquid fermentation are essential for achieving maximum efficiency in liquid fermentation.

It is vital to note that not all bacterial strains react in the same manner in different situations, which is why it is critical to choose the appropriate one.

Many different Bacillus species exist, such as Bacillus macerans, Bacillus amyloliquefaciens, Bacillus macerans, Bacillus pumilus, Bacillus subtilis, Bacillus subtilis, and many others.

Proteases, lipases, amylases, ureases, cellulases, and nitrate reductase are some of the enzymes that are typically found in septic tank biological additives, as well as other enzymes. Listed below are some guidelines to follow while choosing the bacterial strain:

  • The environment – for the greatest results, you should select bacterial strains that are effective in the environment in which you intend to use them. Among the environmental parameters to consider are the aerobic and anaerobic conditions, as well as the pH of the water. The purpose – the purpose of the bacteria you are creating will also decide the strain of bacteria you should choose. Depending on what you want the bacteria to do, the kind of enzymes that need to be created will differ, and this will assist you select which strain to use. a higher level of complexity – in certain circumstances, you may wish to mix numerous strains because you want the bacteria to perform in different settings (e.g., anaerobic and aerobic) in order to produce different outcomes

What is the best way to locate the right substrate? In nature, microbes may be found practically anywhere, which implies they can be gotten from almost any source. Despite this, it is necessary to identify substrate-rich conditions in order to develop effective strains. During substrate selection, effective strains are identified based on their affinity for a certain substrate. During this process, It is also possible to apply serial dilution, which results in a reduction in the number of colonies in order to make selection more straightforward.

  • The decision between a synthetic and a natural substrate comes down to two options: do you want a synthetic substrate or do you want a natural substrate?
  • Natural substrates have the benefit of being environmentally friendly, which is their most significant asset.
  • The outcome of the fermentation process is dependent on the substrate that is utilized, and it is thus critical that the correct substrate is chosen during the process.
  • Molasses, soluble sugars, vegetable and fruit juices, liquid media, and sewage/wastewater are just a few of the substrates that are widely utilized in the liquid fermentation process.

Batch-fed method

In the batch-fed approach, sterilized growth nutrients are often introduced to the colony before it is allowed to mature. It is consequently necessary to provide the culture with nutrients in order to sustain its development rate. The continuous fermentation approach makes use of an open system, which allows for the continual supply of sterilized liquid nutrients to the fermentation process. It is necessary to monitor certain factors in both approaches in order for fermentation to take place.

  • Listed below are the procedures that must be performed when using the batch-fed method: Sterilization Sterilization of media and culture is critical because it inhibits the growth of undesired bacteria or contamination of the culture medium.
  • When performing large-scale operations, the fermenter (or bio-reactor) is disinfected as a whole prior to the introduction of medium.
  • In sterile circumstances, the inoculum is placed in a flask containing a growth medium that has been specifically prepared for it.
  • The bacteria are then transferred to a bigger container in order to facilitate the scaling up of the fermentation process.
  • The pH, pressure, and temperature of the pre-bioreactor are all monitored to ensure that the inoculum grows at its optimal rate.
  • The purpose of this step is to bring the fermentation process to a halt when the bacteria are at their most active stage of activity.
  • Aeration and mixing are important.

It is necessary for Bacillus to develop in an environment with low oxygen tension in order for it to attain optimal growth.

This stage involves the separation of live bacteria from the culture media, which is accomplished using centrifugation.

Freeze-drying In the dehydration of bacteria and enzymes, a procedure known as lyophilisation or freeze-drying is employed in order to preserve them in powder form for an extended period of time.

During the manufacturing process, any water discovered in the product is turned into ice and sublimated for evacuation through the condenser under extremely low pressure.

In this stage, the bacteria that are processed and packaged are ensured to be live, pure, and constant throughout the whole procedure.

This cake is ground to a fine and uniform powder, resulting from the grinding process.

After that, it is combined with diluents and caries in order to obtain the required concentration level.


By utilizing bacteria and other microbes to break down complicated substrates into simpler chemicals, fermentation is defined as a biological approach. The fermentation process results in the production of extra substances known as secondary metabolites in addition to the primary product. Enzymes are only a few of the significant secondary metabolites that are produced as a result of this transformation. The fact that fermentation can create a wide range of metabolites necessitates the use of a controlled environment to ensure that only the intended outcomes are obtained.

Using this method, it is feasible to recycle nutrient-dense waste materials into substrates for new growth.

Fermentation is the most effective method of creating microorganisms that require minimum water content.

The difference between live bacteria and bacterial spores

A spore is a dormant survival cell that is created by an organism when the environment changes. Spores are dormant survival cells by their very nature. Despite the fact that all fungus generate spores, not all bacteria do as well. Bacillus and Clostridium are examples of microorganisms that produce spores in the environment. Most of the time, these spores are impervious to chemical and physical agents that may harm them. When a live cell, also known as a vegetative cell, develops a spore, which functions as a protective coating around its DNA, it is said to be a vegetative cell.

Therefore, spore-forming bacteria are more resistant to environmental restrictions than living bacteria in their natural habitat.

Bacterial spores are not only more durable, but they may also be quickly reactivated when the situation calls for them.


When an organism responds to a change in the environment, it produces spores, which are by their nature dormant survival cells. However, whereas all fungus and all bacteria generate spores, this is not the case for all bacteria. Bacillus and Clostridium are two examples of microorganisms that produce spores in the environment. Chemo- and physical-resistant spores are common among this group of organisms. When a live cell, also known as a vegetative cell, develops a spore, which functions as a protective coating around its DNA, it is considered to be a viable organism.

So far as environmental restrictions go, spore-forming bacteria are more robust than living bacteria.

Bacillus spore-forming bacteria (Bacillus) are used in our biological additives for this reason, among other things. Them is not only easier to reactivate bacterial spores when the situation calls for it, but they are also more durable.

Leave a Comment

Your email address will not be published. Required fields are marked *