How To Localize Septic Tank? (Solution)

In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How to find the location of a septic tank?

This is the easiest way to find where the septic tank is constructed in your property. This is usually a diagram that shows the precise location of the tank. You can even find the exact spot where the septic tank is located. If it is a new property, you will find the septic tank location details in the inspection papers.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do you find a buried septic tank?

Tips for locating your septic tank

If the septic tank lid is underground, you can use a metal detector to locate it.

You can use a flushable transmitter that is flushed in the toilet and then the transmitter is tracked with a receiver.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

Do I have to change my septic tank?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

How do I find my septic lateral lines?

Call your local electric utility provider or gas company to locate buried gas or utility lines before digging. A septic tank probe can also help you find the location. Stick the long, thin metal probe into the ground until you feel it hit the tank and feel the edges of the tank.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.

Check Permits and Public Records.
Determine Septic Tank Material.
Time to Dig.

Mark the Location for Future Maintenance.

What happens if septic tank not pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How far down is a leach field?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Does every house have a septic tank?

A septic tank is a crucial part of a home’s septic system. In the U.S., about 20% of homes use a septic system to manage their wastewater. Septic systems are most commonly found in the Eastern U.S., with homes in rural areas of New England being the most likely to have a septic system present.

How often should a septic tank be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

How to locate your septic tank and your drainfield

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis. It is impossible to perform maintenance operations, however, if you do not know where the tank is located.

Steps to follow to locate your septic tank and drain field

The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.

If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.

This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
Simply look for possible access coverings or a structure that might be concealing it.

These pumps are used to remove waste from the building.
It is supposed to be connected to the sewage output pipe.
As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall.

As a result, it is probable that the tank will be positioned around the corner from the building.

Tips for locating your septic tank

Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances.

However, it is possible that the septic tank lid is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.

Septic tank lids should be visible from the outside. If your septic tank has a riser built, it will be much easier to find your septic tank in some circumstances. The septic tank lid, on the other hand, might be located below ground level, which is particularly true for older homes. In these and other situations, the following guidelines might assist you in locating the septic tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.

It is possible that someone will fall into the tank, causing significant damage or possibly death.

Conclusion

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been found. You may first unscrew the cover to inspect the scum and sludge deposit on the inside of the drain pipe. With the use of tracer dye tablets, you may also do a non-invasive inspection of your septic tank. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of 2 days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field is a vivid green hue in the surrounding area.

It is possible that someone will fall into the tank, causing major harm or perhaps death to themselves.

How to Locate a Septic Tank

A surprising number of homeowners have had to figure out how to find the location of a septic tank on their premises. If you’re purchasing a home with a septic system or discover that your property’s tank hasn’t been maintained in years, you’ll want to know where the tank is located because all septic tanks must be pumped at some point in time. In the course of a real estate transaction, the property owners or real estate agent may be aware of the location of the tank. Inquire about the “as-built,” which is a schematic of the septic system and the specifics of its installation.

Unfortunately, locating the septic tank may not be as simple as it appears.

In other cases, not filing the as-built with the local health department was not required. Because septic system permits have only been needed in Oregon since 1972, you may have to depend on visual indicators to determine whether your system is working properly.

1.Follow the Outgoing Sewer Pipe

Look for the four-inch sewage pipe that runs through the structure and the location where it exits the building in the basement or crawl space. Locate the location outside the building where the pipe exits the building or the location of an access cover over the pipe. It is required that septic tanks be at least five feet away from the structure, although they are usually between 10 and 25 feet away. You may follow the pipe all the way to the tank using a metal probe. It is important to note that sewage lines may curve and run around the corner of a building rather than following a straight path to the holding tank.

2.Search for Septic Tank Risers and Lids

Depending on their age, septic tanks are either one- or two-compartment structures. Each compartment has a cover, with two additional lids for dual-compartment tanks that were added later. If the tank includes an access point known as a riser, the lid may be readily visible from outside. Look for round, plastic discs that are about a foot or two in diameter. Due to the fact that the lids might be flush with the ground or just a few inches above it, they can get overrun with grass and other plants over time.

Tanks without risers are likewise equipped with lids, however they are located underground.

3.Find the Drain Field First

In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more quickly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other parts of the yard. Spots of high or low ground in the yard might possibly indicate the presence of a subterranean tank or drain field. You will be able to discover the tank if you probe these regions.

Reasons to Hire a Contractor for Help

Attempting to locate a septic tank on your own can be risky, and in some cases, lethal, if the septic system is old and in danger of collapse. In the event that you fall into a cesspool, dry well, or septic tank, you will die. Removing septic tank lids on your own might potentially put you at risk of contracting bacterial or virus diseases. If you detect any of the following issues, please contact a contractor to assist you in locating or inspecting your septic tank:

In certain cases, it might be fatal to attempt to locate a septic tank on one’s own if the system is old and in risk of collapse. Falls into cesspools, dry wells, and septic tanks have the potential to kill the victim. It is also possible to get bacterial or viral diseases while removing septic tank lids. If you detect any of the following symptoms, you should contact a contractor to assist you in locating or inspecting your septic tank.

Even though you may be ashamed about forgetting where your septic tank is, it is a very frequent problem among homeowners. A contractor may assist you in locating it, and he or she may do it as part of the pumping service. If you need assistance locating your tank or if you have any other questions, please contact us at 503-630-7802. We are available to assist you!

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

Immediately adjacent to your well
Beneath your home
Directly against your home

For example, underneath your driveway
Under trees
And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

Your water well, if you have one (for a variety of reasons that are rather clear)

Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities.

You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

LOCATING YOUR TANK — JT’s SEPTIC

Septic tank location can be difficult, and it is best left to the expertise of a trained specialist. We have the experience and equipment necessary to locate and remove your tank lids as fast and effectively as possible while causing the least amount of damage to your property as possible. Attempting to save a few bucks time and time again, the homeowner (rightfully) digs trenches in the yard, sometimes for hours or even days, in an attempt to locate the tank; in the process, many well-meaning people have damaged utility lines and even the sewer pipes themselves.

For those of you who insist on trying to locate your own septic tank, the following are some pointers that will assist you in estimating its location:

Locate your sewer cleanouts – the tank should be in close proximity to the cleanouts
And If you have a small tank, you may notice dead areas in your yard

However, this is rare. Some depressions in the ground, roughly 8′ x 5′ in size, may be present. Check with the county to see whether you have a plot plan of utilities in your yard. Depending on how deep the tank is, you may want to consider building risers, which will bring the tank access up to the surface. JT’s would be pleased to install risers for you, or you may purchaseTuf-Titebrand risers from JT’s and have them installed yourself.

obtain A COPY OF YOUR PLOT PLAN

Determine the placement of your sewer cleanouts – the tank should be in close proximity to the cleanouts. If you have a shallow tank, you may see dead areas in the yard. Some depressions in the ground, roughly 8′ x 5′ in size, may be present; Check with the county to see whether you have a plot plan of utilities in your yard; Depending on how deep the tank is, you may want to consider building risers, which will bring the tank access to the surface level. We at JT’s would be pleased to install risers for you, or you can purchase Tuf-Titebrand risers from us and have them installed by our staff.

How To Find My Septic Tank

What is a septic tank

How do I know if I have a septic tank
And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

“How can I locate my septic tank?” is one of the most often requested inquiries we receive.
When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.

The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret.

There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
A septic system is likely to be installed in your home if you reside in a rather rural location.

Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.

Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system. Your home’s building permit and drawings will almost certainly include details concerning the existence (or absence) of a septic tank on your site.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
The county health department is responsible for keeping track of septic systems.

A septic tank’s position could be depicted on a survey map, for example.
The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

In this way, if you ever decide to sell your property, you will be able to supply the new owner with everything they will need to locate the tank and properly manage their septic system.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.

Going via the sewage line itself is another method of locating the septic tank utilizing it.
Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
When the snake comes to a complete halt, it has almost certainly reached the tank.

While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation.

However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
Directly in front of the home Immediately adjacent to your well (if you have one)
In close proximity to trees or densely planted regions

In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

How To Locate a Septic Tank

Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Public health records can be obtained by contacting your local health department.

These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.

Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
Make contact with the construction company that built your home.
Find the location of the main sewer line.
Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.

An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.

Please contact us.

We have specialized technology that we can use to pinpoint the location of your tank.

You should make a note of the position of your tank for future reference if you were successful in discovering it.

A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.

As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.

How to Locate a Septic Tank Drain Field

The location of a septic tank is frequently inquired about by consumers. A professional may be required to lift the lids of your septic tank if your tank does not have specific risers that raise the lids above the ground level. Prior to calling for assistance, there are a few things you may do to prepare yourself. It will save you money when you need to have your septic system serviced if you can identify your own septic system. For public health records, you should contact your local health agency.

In addition to the permit, a schematic showing the placement of the septic system should be included.
Request for Public Records from the Nevada County government.
Alternatively, you might go over the homeowner’s inspection report that was completed when you acquired your property, since this may provide the diagram that you require to identify your septic tank’s location.
Your home’s architect or builder should be able to provide you with an architectural drawing of the structure, which will show you where the septic tank is.
Generally speaking, the main sewage line originates in your crawl space or basement and leaves the side of your house, as shown in the illustration.
Then take another measurement at the same spot outside the home.
Keep from pressing too hard if you encounter resistance; otherwise, the septic line might be damaged.

Employ the services of a metal detecting professional.

Wearing steel-toed boots or other shoes containing steel is not recommended for safety reasons.

We can assist you if you have attempted all of our suggestions on how to identify a septic tank without success.

This is after you’ve located your sewage treatment system.

If you are having your septic system pumped or inspected soon, you may want to consider having risers added as part of the procedure.

It makes it easier to identify and access your septic tank since a riser elevates the septic lid above the earth. As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, allowing you to save money on your landscape maintenance.

To find out if your local municipality has the records from the installation of your septic system, you should contact them. This can provide you with accurate information on the location of the drain field. Look for tubes or pipes in your yard that have white caps on the ends of the tubes or pipes. The caps, which are referred to as monitoring ports, allow you to check the amount of liquid in the drain pipes. The caps are positioned at the end of the drain field
They are made of concrete. Take a look at the surface of your lawn to see if there are any locations where the earth has been flattened in parallel rows. This can be used to identify the drain field. Check your yard for indicators of a drain field to see if there is one. During the winter, seek for spots where the frost melts the most quickly to save time. When your lawn begins to turn brown in the summer due to the heat and lack of water, check for green stripes in the grass. The grass is lush and green in these regions as a result of the moisture provided by pipes in the drain field. Engage the services of a competent organization to find the drain field
And

The Drip Cap

A septic system is a sort of sewage system that is used to remove wastewater from properties that do not have access to municipal sewage systems. The caps, which are referred to as monitoring ports, allow you to check the amount of liquid in the drain pipes. Find green stripes in the lawn throughout the summer, when your grass begins to turn brown due to the heat and lack of water
They are signs of healthy grass. The grass is lush and green in these regions as a result of the moisture provided by pipes in the drain field.

Looking for Your Septic Tank? Here’s How to Find It

A septic system is a form of sewage system that is used to remove wastewater from properties that do not have a connection to public sewage systems. The caps, which are referred to as monitoring ports, allow you to check the amount of liquid in the drain pipes. Find green stripes in the lawn during the summer months when your grass begins to brown due to the heat and lack of water. Since these regions receive moisture from the drain field through pipes, they have a lush, green appearance.

Why you need to know where your septic tank is located

If your house does not have access to municipal sewage services, it is almost inevitable that you have a septic tank to redirect and store all of your wastewater someplace on your property’s subterranean drainage system. While a septic system is trustworthy and cost-effective, it does not operate without some kind of upkeep. According to the Environmental Protection Agency, a septic tank should be examined at least once every three years and drained every three to five years at the absolute least.

In either of these scenarios, you’ll need to know the location of your septic tank so that you can arrange for it to be serviced.

How to find your septic tank

Inquire with your neighbors– If you have a septic tank, it’s possible that your neighbors have, too. Perhaps you’ll be fortunate enough to come across someone who knows where your tank is or who can assist you in narrowing down your search
Obtain information from public records– It is possible that your local county or municipality has an existing septic tank map on file, which contains a schematic and the measurements of your property. Examine the home inspection report you received when you purchased your house to see if there is any mention of the presence of a septic tank and the location of the tank before going to your local records office. Start in the basement and discover the sewer pipe that leaves the house if you have to locate the tank by yourself. Pipe with a diameter of four inches is usual for this application. After that, go outside and around to the opposite side of the wall. Then, using a metal soil probe to poke small holes in various locations around your property, trace the pipe’s course until you reach the tank. When you strike the flat top surface of the tank with the probe, you’ll notice a distinct change. Consider your surroundings– If you have a huge property, locating a needle in a haystack might seem like a daunting task. To make your search more efficient, you can eliminate locations near structures, paved surfaces, the water well, and, ideally, regions with extensive trees or landscaping from consideration. Another possibility is that you may notice a patch of grass that is a little greener or that is growing more quickly around the tank. Locate the septic tank lid– Regardless of how you pinpoint the position of the tank, you may need to perform a little digging in order to expose the lid. You may use the soil probe to determine the perimeter of the tank – most tanks will be around 5 7 feet in length and width. As soon as you’ve outlined the edges, start shoveling in the middle and working your way around the perimeter until you reach the lid. However, unless you’re servicing the tank immediately away, there’s no reason to lift the top and let the noxious odors out into the environment.

After you’ve located your septic tank, make a note of the position on a map or mark it on your GPS device for future reference. This will assist you in avoiding the construction of structures or the planting of deep-rooted plants in the vicinity of the sewage line and septic tank. When it comes to selling your house, a map or handwritten diagram may also be beneficial. If you want plumbing assistance in New Haven or Fairfield County, Rick’s Plumbing is the brand you can rely on. In order to obtain expert assistance, please send us a message or phone us at (203) 874-6629.

The post was published on July 16, 2019 under the category Septic Tank System.

Septic Location Services, Boise, Meridian, ID

Is it difficult to determine the location of your septic system or drain lines? ASAP Septic can discover them using the most up-to-date video equipment, relieving you of the worry of attempting to locate them on your own. Using the information provided above, we can also figure out how big your septic system should be and where it should be installed, as well as the direction your drain/leach field should be directed. 1.Confirm the existence of state records. Depending on when your home was built and whether or not it was required to be recorded, the location of your septic tank may already be in the public property records.

Observe and evaluate the backyard.
Occasionally, though, there are hints as to their whereabouts to be found.
A modest bump or depression in the ground may indicate the presence of an underground tank.
The indoor pipes may be checked using a soil probe to identify the position of the septic tank, which can be followed from your home.
What to Do If You Discover It on Your Own In the event that you have located your tank, DO NOT attempt to open it yourself.
Older tanks may have lids that are corroded or corroding, which might cause the tank to collapse.

On the top of the tank, there is frequently a hole that allows a septic pump vacuum line to be inserted, allowing the tank to be cleaned. Septic tank excavation is not only dangerous to your health, but it may also be lethal if you fall into the tank.

Septic and Drain Line Locator Services

Are you unsure about the location of your septic system or drain lines? ASAP It is possible for Septic to discover them utilizing the most up-to-date camera equipment, alleviating the burden of attempting to locate them on your own. In addition, we utilize the information provided here to determine the size, placement, and installation of your septic system, as well as the orientation of your drain/leach field. 1.Confirm the existence of State Records. Depending on when your home was built and whether or not it was required to be recorded, the location of your septic tank may already be in the public property record.

Observe and evaluate the backyard Installers work hard to ensure that septic tanks are as inconspicuous as possible in your backyard.
The majority of tanks are buried 6 inches to 4 feet beneath the surface of the earth.
Tanks must be at least 5 feet away from the house, according to the Idaho Department of Environmental Quality.
4.
Because of the potential dangers associated with septic tanks, they should only be handled by specialists.
Some tanks are difficult to open and can release poisonous vapors if not opened with appropriate gear.
Septic tank excavation is not only dangerous to your health, but it may also be deadly if you fall into the tank.

Call ASAP Septic today at(208) 991-7184and see how we can help you to find your septic tank and drain/leach fieldin Mountain Home, Garden Valley, Murphy, Parma, Crouch, Caldwell, Emmett, and all surrounding areas.

A septic system, sometimes known as a septic tank, is an underground system that processes the sewage that flows from your house before disposing of the treated, cleaner water. Septic systems are typically seen in residential areas. The treated water is subsequently re-introduced into the environment through filtration. This is critical because untreated sewage may harm nearby streams and water systems, as well as the soil around the perimeter of your septic system. Because your septic system is designed to cleanse and filter sewage, it is critical that it is in proper operating order.

What is a Drainfield?

The drainfield, also known as the leach field, is the area where the water from your septic system is sent after it has been cleansed and filtered. It is necessary to construct a drainfield in order to ensure that water is distributed uniformly back into the soil.

How do I find my septic system?

If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.

This will show you exactly where your septic system is located in your yard, if you have one.

You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.

If everything else fails, contact a septic installation company. If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.

How long do septic systems last?

Depending on whether you have a more recent septic system in your yard, it may have an access lid that is visible from the ground level. You may identify your septic system as soon as you go into your yard if this is the situation at your residence. Unfortunately, this isn’t the case with earlier septic system designs. Even if you have an older system at your house, you may be able to locate it by checking for areas of greener and faster-growing grass, or even an area with less growth than the rest of your yard.

Your septic system will be visible in this diagram, which will help you locate it in your yard.

You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some searching.

A septic system installer may be required to excavate your yard in order to discover your septic tank, as a last alternative, if you cannot identify your septic system.

What’s the advantage of installing a newer septic system rather than an older system?

Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.

New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.

How much does a new septic system cost?

Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run.

Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.

How big is my septic tank?

It is not uncommon for new septic systems to cost tens of thousands of dollars, if not more, to be an enormous investment. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it easier for you to pay for a new septic system. Purchase further information from a septic system installation business on how to obtain septic systems at the lowest possible price while securing low-interest financing.

Why should my septic system be pumped out?

Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run. It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer.

Does my tank need to be dug up to know if it needs to be pumped?

In the absence of a septic system pumping, gaseous waste created by sewage waste accumulates and has the ability to accelerate the rate at which your septic tank degrades. In order to limit the rate at which your tank degrades, you should have your septic system drained at least once a year. The fact that degeneration is unavoidable must be recognized, though. You can extend the life of your septic system by doing regular maintenance, which includes pumping your tank. It is recommended that you pump your septic system about once every 2-3 years if you want to prevent having to pay for a whole new tank.

Why should I have risers and lids installed on my septic system?

Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the likelihood of septic tank degradation. The regular pumping of your septic system will allow you to reduce the rate at which your tank degrades. It is critical to understand, however, that degeneration is unavoidable. Proper maintenance, which includes pumping your tank, will only help your septic system last for a longer period of time. Pumping your septic system approximately once every 2-3 years is the most cost-effective way to prevent having to purchase a new tank.

How often should my septic system be pumped out?

A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three. You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.

Do I need to have the septic tank pumped if I’m selling my house?

In most cases, a septic system has a 1,500-gallon tank, which needs to be pumped around every two to three years for a household of four people. The likelihood of you needing to pump your septic system every five years is higher if you have less than four persons in your house.

In order to determine the exact size of your tank, you should speak with your local health department. You should also speak with a septic system provider to determine how frequently your tank needs to be pumped based on the size of your family and the size of your tank.

How do I find someone to pump my septic system?

It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.

How much does it cost to have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.

What happens if I don’t have my septic system pumped?

It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, therefore you should always contact several pumpers before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system before it should have been replaced in the first place!

I just had my septic system pumped. Why is it full already?

Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.

What do you look for when inspecting my septic system?

When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.

We’ll also note whether the level of solid waste in your septic tank indicates that it should be pumped, and whether any repairs are required to improve the overall functionality of the system.

The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?

Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.

What happens when my septic system fails?

Symptoms of a failing septic system may include minor issues such as drain breaks or pipes that have been stopped, which can be caused by tree roots intersecting with the system. Septic system failure, on the other hand, might indicate that your septic tank has degraded to the point that it cannot be repaired and must be replaced. A blocked drainfield will hopefully not become your problem because it is the most expensive component of your system to replace; nevertheless, if it does, you must act quickly to make the necessary repairs or else your waste will continue to back up, perhaps causing damage to your property.

You’ll need to replace the drainfield as soon as possible to avoid further pollution of drinking water sources.

How do I prevent my septic system from failing? How can I properly maintain my septic system?

Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.

What shouldn’t I flush down the toilet?

As a general rule, only human waste and toilet paper should be flushed. There are several reasons why flushing medicine down the toilet is not a good idea. First, medication might kill some of the bacteria in your septic tank, which is necessary to break down solid waste. Second, drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.

What shouldn’t I pour down the drain?

Human waste and toilet paper should be the only items flushed, as a general rule of thumb It is never a good idea to flush medicine down the toilet since medication will kill some of the bacteria in your septic tank, which is necessary for the breakdown of solid waste, and drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed.

Is using a garbage disposal bad for my septic system?

Using a trash disposal will result in the requirement to pump your septic system more frequently than you would otherwise need to do if you avoided flushing food particles down your drains.

Too much food collection in your tank might cause your drainfield to clog since the microorganisms in your tank are not capable to digesting it. When using a trash disposal, check with your septic system company to find out how frequently the disposal should be serviced.

Should I add bacteria to my septic system?

Aside from being completely useless, introducing bacteria to your septic tank is also highly discouraged. The bacteria produced by human waste is sufficient to break down the solid sewage in your tank without the need of bacteria supplements or other methods. If, on the other hand, multiple members of your home are using pharmaceuticals, they will enter your septic system through human waste and kill some of the beneficial bacteria in your tank, causing it to malfunction. Please contact the firm who installed your septic system to see whether or not you should be worried about the amount of bacteria-killing compounds entering the system.

There’s a strong sewer odor outside of my house. Could this be my septic tank?

Strong sewage stench coming from your yard might be coming from your septic system, but it could also be coming from someplace else completely. Identifying the source of the smell is important. Check for propane or gas leaks in your home before concluding that your septic system is at fault; however, if your gas or propane lines are not leaking, determine how long it has been since you had your tank pumped, and whether there is any sewage waste in your yard or other signs of septic system failure before making your final decision.

Can my septic system contaminate nearby water?

It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely. In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.

My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?

The drainage of your gutters into your yard above your septic system, and particularly into your drainfield, can be hazardous to your septic system. All water should be diverted away from your septic system in order to minimize flooding and damage to your septic system’s tank or drain field.