How To Find Out Record Septic Tank Repairs? (Solved)

  • Septic system records are found by the Parcel Number of the property. This number is the township, range, section, quarter section and tax lot that is best found by calling your local county assessor’s office or visiting its website.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

Do old septic tanks have to be registered?

A septic tank discharges water into the ground, and the quantity of such is important so as to avoid damage to the environment. If your septic tank discharges two cubic metres or less above ground, then you don’t need to register it. If it releases five cubic metres, or less, below ground level then it is also exempt.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

  1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
  2. Check Permits and Public Records.
  3. Determine Septic Tank Material.
  4. Time to Dig.
  5. Mark the Location for Future Maintenance.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

Do I have to replace my septic tank by 2020?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

Do I need to replace my septic tank?

Under the new Environment Agency General Binding Rules, If you have a septic tank that discharges directly to a surface water (ditch, stream, river, etc.) you must replace or upgrade your septic tank treatment system to a full sewage treatment plant as soon as possible, or when you sell your property.

What are the new rules on septic tanks?

According to new regulations passed in 2015, if your septic tank discharges to surface water such as a ditch, stream, canal or river, you will have to upgrade your system to a sewage treatment plant or install a soakaway system by 1 January 2020.

Does heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Can you sell a house with an old septic tank?

If you’re selling a property with a septic tank, then you must be transparent with buyers about the fact the property uses a one and provide a detailed specification of the system. In fact, You are required by law to inform a buyer in writing about the presence of a septic tank.

What are the signs that your septic system is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water.

Is Ridex good for your septic system?

How additives, like Rid-x, interfere with your septic system’s eco-system. According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

How do you know if your leach field is failing?

The following are a few common signs of leach field failure: Grass over leach field is greener than the rest of the yard. The surrounding area is wet, mushy, or even has standing water. Sewage odors around drains, tank, or leach field.

Keeping Well and Septic System Records

It’s critical to keep track of your own well and septic data. Photograph courtesy of George Hurd of Penn State Extension Being prepared with a “Well File” and a “Septic File,” or other written documents including information on your water system, is a crucial step in safeguarding the health of your family and your water resources. In addition to making it simpler to arrange well, water treatment system, or septic system maintenance, good records may also aid in identifying the root causes of water quality variations.

You should keep track of the following: well and septic system installation, permits, maintenance, inspections, pumping, repairs, and water testing.

Keep records of service visits if you have water treatment equipment and follow a maintenance plan.

Also, keep the manufacturer’s information for any water treatment equipment you use with your well file on hand for reference.

  • Copies of all water quality test results should be maintained on hand in order to track any changes that may occur over time.
  • Your records must also contain a map indicating the position of your well as well as the location of your septic system, which should include the septic tank and drainfield.
  • Locate the location of your well head on your property and mark it.
  • If you do not have access to blueprints, locate the point at which your sewer line exits your home.
  • Your septic tank pumper may also be able to assist you in locating all of the components of your system.

Create several plot plan diagrams with measurements that include a rough sketch of your house, a rough sketch of your septic tank cover, a rough sketch of your drainfield area, a rough sketch of your well, and any other permanent reference points such as trees or large rocks and keep them with your well and septic system records.

It is important to note that a well log is an important source of information for documenting the building of a water supply well, according to the Iowa Department of Natural Resources.

In-depth well logs contain information such as the types and thickness of each geological sequence encountered, the types of materials used in the well’s construction, the construction techniques employed during the well’s installation, and the water levels of the aquifer(s) while at rest and when pumping.

  • The well log is a valuable tool for the well owner, since it may be used to troubleshoot any difficulties that may arise with the well in the future.
  • Individual water well and spring reports, as well as data package downloads, are available online through the PaGWIS.
  • Beginning in 1966, drillers have been obliged to report water well completion information, which includes the location of water wells drilled in Pennsylvania as well as the criteria used in their construction.
  • Go to the PaGWIS website and look for the link that says “Groundwater Records Online” to see if your well records are available on the internet.
  • Records of your well and septic system are essential for maintaining and safeguarding both the health of your home’s water system as well as the health of your family.

If the quality of your water deteriorates, you can take steps to improve it. Your well’s historical water quality data can be used to illustrate the water quality of your well in the past. Having this information will be useful if you ever decide to sell or transfer your property.

Online Septic Research

You should keep track of all of your well and septic system data. The photo was taken by Penn State Extension agent George Hurd. A well file and a septic file, or other written documents including information on your water system, is a crucial aspect of maintaining your water resources as well as your family’s health and well-being. The use of accurate data makes it simpler to schedule maintenance for wells and water treatment systems, as well as identifying the sources of water quality changes.

  • You should keep track of the following: well and septic system installation, permits, maintenance, inspections, pumping, repairs, and water testing.
  • This will assist you in remembering when the next service visit is required.
  • Record the names, dates, and specifics of any work done on your well or septic system.
  • Maintaining copies of all water quality test results is important for tracking any changes that may occur with the passage of time.
  • Your records must also contain a map indicating the position of your well as well as the location of your septic system, which must include the septic tank and drainfield.
  • On your land, find the location of the well’s head.
  • Locate the location of the sewer line that exits your home if you do not have access to drawings of the system.
  • You might also ask your septic tank pumper for assistance in locating all of the components of your system.

Once the well head and all septic system components have been identified, create several plot plan diagrams with measurements that include a rough sketch of your house, septic tank cover, drainfield area, well, and any other permanent reference points such as trees or large rocks, and keep them with your well and septic system records until the job is completed.

According to the Iowa Department of Natural Resources, a well log is a vital source of information that details the building of a water supply well and is kept on file for future reference.

Each detail in a well log includes data on things like the types and thicknesses of geological sequences encountered, the types of materials used in the well’s construction, construction techniques used while the well was being installed, the water levels of the aquifer(s) while at rest and when pumping, how much water the well will provide, and then the name and contact information of the certified contractor who oversaw the well construction process.

  • When difficulties arise with a well, the well log is an invaluable tool for the well owner to use in troubleshooting the well.
  • Individual water well and spring reports, as well as data package downloads, are available online through the PaGWIS website.
  • The submission of water well completion information, which describes the location and construction specifications of water wells dug in Pennsylvania, has been mandated since 1966 by the Pennsylvania Department of Agriculture and Rural Development.
  • Go to the PaGWIS website and choose the “Groundwater Records Online” option to discover if your well records are accessible online.
  • Maintaining and safeguarding your home’s water system, as well as the health of your family, requires the keeping of well and septic system records.

You will be able to handle any issues that arise if the water quality changes. Records of your well’s history water quality might be used to illustrate the well’s past water quality. Having this information will be useful if you ever decide to sell or transfer your home.

Alteration Permit

An Alteration Permit will be required for onsite systems that have a failing tank or disposal field.

Abandonment Permit

An Abandonment Permit will be required for any onsite systems that are to be abandoned in order to connect to the municipal sewage system or that are to be taken out of operation.

Research

Option 1: You may perform your own study at no cost by using the Online Septic Search Tool (available at no expense). Option 2: You can call the Environmental Services Department and ask for a more in-depth search to be undertaken (fees will apply for research conducted by the department for each parcel).

  • Researchers charge a cost of $30 for research requests that take 3 to 7 business days. Expedited researchers charge a $60 price for research requests that take 1 to 2 business days. Septic Research Request Form.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

See also:  How Much Is Septic Tank Pumping Port Charlotte? (Solution)

Most counties, on the other hand, keep records of septic tank installations for every address.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home.

Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis.

All of the heavy lifting has been delegated to our team of professionals.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

  • Immediately adjacent to your well
  • Beneath your home
  • Directly against your home
  • For example, underneath your driveway
  • Under trees
  • And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

  • Your water well, if you have one (for a variety of reasons that are rather clear)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

  • If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
  • Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Following the path of your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are typically found in the basement or crawlspace of your home. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are discovered. Apart from that, your home’s drainage system includes a septic tank, which is connected to your sewer main through a pipe.

If you have exposed plumbing lines in your basement or crawlspace, there’s a good possibility that one of them is your main sewer line, which may be dangerous.

If the line is identified, it is usually made of plastic.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities.

You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

Florida Department of Health in Volusia

  • How can a new business determine whether or not it need an examination of its septic system? In order to add a room to my house, why do I need to get the current septic tank system authorized first? Who determines whether or not I require a mound septic system
  • What exactly do I need to do in order to fix my drainfield? Does the government offer any help programs for septic system repairs?

1. What is the reason for an inspection of the septic tank system for a new business?

A shop in the appropriate size and location has been discovered for my new business, which I want to launch shortly after. When I went to receive my Business Tax Receipt (BTR), (formerly known as an occupational license), they informed me that I needed to get the septic tank system certified by the Florida Department of Health in Volusia County. I agreed to this. A: According to Florida Statute 381.0065, all companies that rely on a septic tank system for sewage disposal are required to acquire clearance from the local health authority whenever the company owner, the kind of business, or a tenant changes.

Modifications to company activities may result in an increase in sewage flow or a change in sewage characteristics.

Who is in charge of completing and submitting the application?

Section 1: Introduction

2.What is the reason to have the existing septic tank system approved before I add a room onto my home?

I intend to expand my current residence by adding a room. The building department informed me that they would not grant a building permit unless the current septic tank system had been authorized by the department. Because it will not be air conditioned, I do not believe that I will be required to do so. If you are planning to build an addition to your current house, you will need to have your existing septic system inspected first. This inspection technique is required in order to establish whether or not the current septic system has sufficient capacity to accommodate the extension.

This criterion is not affected by whether or not the addition has air conditioning or heating.

Applications and guidelines for a Residential Inspection of Septic System Application for an Existing Septic System Section 1: Introduction

3. Who determines if I need a mound septic system?

I possess a piece of land on which I intend to build a house. According to a buddy of mine, I will most likely require a mounded septic system in order to properly dispose of waste. My lot is high and dry, and it never flooded during the recent torrential rains, thus I do not want a mound built on top of it. The Florida Administrative Code, Chapter 64E-6, mandates a 24 inch buffer between the wet season water table and the bottom of the drainfield during the rainy season. It is possible for water tables to change dramatically between wet and dry seasons.

As soon as the water table has been determined, a permit is drafted in accordance with state law requirements.

If sod is to be used on the slopes, a 2:1 slope is necessary for mounds up to 36 inches in height, and a 3:1 slope is required for mounds higher than 36 inches in height; if hay and seed is to be used on the slopes, a 5:1 slope is required regardless of the height of the mound.

Application for a New Septic System Construction Permit, as well as instructions on how to complete the application

4. What do I need to do to fix my drainfield?

My drainfield isn’t performing as expected. A septic system repair permit must be obtained before any work on your septic drainfield may be done.

5. Are assistance programs for septic system repairs available?

If you qualify, the Volusia County Community Assistance Division may have cash available to you. Contact them for more information. Please email [email protected] or call 386-736-5955 for further information. Section 1: Introduction

See also:  How Ofter Do You Have A 1000 Gal Septic Tank Dumped? (Perfect answer)

How To Find My Septic Tank

  1. What is a septic tank
  2. How do I know if I have a septic tank
  3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
  4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

  • “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
  • When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
  • The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
  • In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

  1. A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
  2. A septic system is likely to be installed in your home if you reside in a rather rural location.
  3. Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
  4. When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
  5. Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

  1. If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
  2. The county health department is responsible for keeping track of septic systems.
  3. A septic tank’s position could be depicted on a survey map, for example.
  4. The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

  • In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
  • By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
  • The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
  • Going via the sewage line itself is another method of locating the septic tank utilizing it.
  • Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
  • When the snake comes to a complete halt, it has almost certainly reached the tank.
  • While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
  • When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

  • Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
  • Directly in front of the home Immediately adjacent to your well (if you have one)
  • In close proximity to trees or densely planted regions
  • In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

See also:  How To Remove Grease Buildup From A Septic Tank? (Question)

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

Septic Systems

Septic systems that are in good working order are beneficial to your family, your budget, and the environment. You can safeguard your septic system and save money on costly repairs by following a few easy procedures. Your groundwater, as well as the lakes, rivers, and beaches of Puget Sound, will benefit as well!

What is a septic system?

Consider them to be similar in size to a sewage treatment facility, but considerably smaller. They collect, store, treat, and dispose of the items that you flush or pour down the toilet. Various sorts of systems are available to choose from.

Some are straightforward, requiring merely a tank and a drainage area. Others are more complicated, necessitating the use of pumps, filters, or materials that have been particularly created. For further information, please see our 3D septic system models.

A maintained septic system keeps you and the environment healthy and helps:

  • Reduce the likelihood of individuals becoming ill as a result of untreated sewage
  • Reduce the likelihood of groundwater and surface water becoming contaminated
  • You will save money and your system’s life will be extended.

Our role is to:

  • Consult with septic system specialists to approve the design, placement, and installation of the system
  • Property owners should be educated on the need of keeping their septic systems in good working order.

What are the regulations?

  • Environmental Health Code, Chapter 1, General Provisions
  • Environmental Health Code, Chapter 2, On-Site Sewage
  • Environmental Health Code, Chapter 3, Water Regulation
  • Appeals Process for Orders and Decisions of the Health Officer
  • Environmental Health Code, Chapter 1, General Provisions

Resources

  • The Septic Systems 101 webinar is available online
  • Designers and Engineers —A list of designers and engineers that are qualified to work in Pierce County is available online
  • Septic Systems 101 webinar is available online
  • Installation Companies —A list of companies that have been certified to work in Pierce County
  • Fee Schedule — Fee Schedule for On-Site Sewage, Wells, and Water Resources Services
  • Complaints can be lodged against a Pierce County Septic Service Company or a person. A list of firms that have been certified to work in Pierce County’s septic system service industry.

Have questions? We have answers!

For further information, please contact us at [email protected] or (253) 649-1925.

Septic Tank Maintenance

All septic tank installers and pumpers in Alabama are required to hold a license issued by the Alabama Onsite Wastewater Board, according to state law. Licensed technicians may be located on the Alabama Onsite Wastewater Board website, which can be accessed here. Every three to five years, you should contact a professional specialist to clean your septic tank and effluent filter. Groundwater pollution may be prevented by performing routine maintenance on your system. This will extend the life of your system and prevent costly repairs.

When the filter detects that the system requires maintenance, it will alert you.

Septic tank systems that are failing can cause the following problems:

  • Health of you and your family
  • Damage the environment, lowering the value of your home
  • And being difficult and expensive to fix

Signs of Potential System Problems

  • Wet places in the yard
  • Toilets or drains that are slow to drain
  • Gurgling sounds coming from your drains
  • Sewage aromas
  • And more.

Do’s and Don’ts

  • Wet places in the yard
  • Toilets or drains that are slow to drain
  • Gurgling sounds coming from your drains
  • Sewage aromas
  • And other issues

View our Homeowner’s Guide and Record Keeping Folder to keep track of your maintenance and for additional information on how to maintain your septic system. The most recent update was made on May 13, 2021.

Septic System Owner’s Guide

What kind of computer system do you have? In North Carolina, there are many distinct types of septic systems in use, but the vast majority of the over 2 million systems in use throughout the state are minor variations of the typical septic system. This system includes a septic tank as well as a drainfield that is filled with gravel (usually two to six trenches). Since the mid- to late-1990s, classic gravel aggregate trenches have been phased out in favor of innovative gravel-less trench designs, which have become increasingly popular.

  1. Some of the most often used gravel-free trenches nowadays are either long and narrow, tunnel-shaped chambers in the trenche, or gravel replacements such as expanded polystyrene aggregate.
  2. A booklet from the Cooperative Extension Service, AG-439-13, Septic Systems and Their Maintenance, outlines the typical system, easy adjustments to it, and the most significant maintenance requirements.
  3. The application of these technologies is now widespread, whether in new housing projects or in the replacement or repair of malfunctioning septic systems in residences and businesses.
  4. In order to address this, state regulations provide specified maintenance requirements for a number of these more advanced technology.
  5. Furthermore, state regulations mandate that the health department examine these systems on a regular basis.
  6. Are you familiar with the location of your septic system and repair area?
  7. If you do not have a copy of your septic system permit or a soil evaluation document, contact your local health department.

This Septic System Owner’s Guidefile folder should contain the following items: It is normally possible to establish the location of a septic tank and drainfield by looking at a copy of the permit and consulting with a septic contractor, a consultant, or the local health department A “repair area or replacement area,” in which a second drainfield might be constructed if necessary, has been required on nearly all home sites approved since the early 1980s, according to state law.

It should be noted on your septic system permit that this repair area was designated by the health department when the site was allowed.

Some Important Facts to Understand About Your Septic System

  • In what form of septic system do you have
  • Where is it situated
  • And where is the repair area situated? Is the septic system up and running? In the past, has it been kept up to date? What can you do on a day-to-day basis to ensure that your system continues to function properly? What kind of maintenance will be required in the future

On the grid labeledSeptic System Layout, draw a rough sketch of your home, septic system (including both the tank and drainfield), repair area, and any other essential features (such as your driveway). The distance between the home and the access port on the septic tank should be measured and recorded when having your septic tank drained. This will assist you in locating it again. You may also want to indicate the position of your tank as well as the limits of your drainfield in your yard. If you do not have a riser installed over the access port for your septic tank, you may want to consider having one put in.

  • Even when properly maintained, septic tanks can contain harmful gases and pollutants, as well as bacteria and other germs that can cause major health problems if not addressed.
  • Is your septic system in proper functioning order?
  • Many individuals are unaware that untreated sewage that has accumulated on the surface of the ground might be a health threat.
  • Before fixing a malfunctioning septic system, you must get a permit from the local health authority, according to state regulations.
  • What kind of upkeep has been carried out?
  • If you are purchasing an existing house, you should ask the seller a few critical questions, such as the following:
  • What is the age of the system
  • What is the location of the tank and drainfield (they may or may not be on the same property or even on the same parcel of land)
  • When was the last time the tank was pumped
  • What is the frequency with which it has been pushed
  • Is it necessary to clean the “effluent filter” in the septic tank on a regular basis (effluent filters are required for systems established after 1999)
  • Has there been any indication of a likely failure? In what location can I get a copy of the permit and documentation proving how effectively (or poorly) the system has been maintained
  • Do you know whether any improvements have been made to the house that would necessitate expanding the capacity of the system? Is the system still operational, and if so, when and by whom was it repaired?

If the house has only recently been constructed, request that the septic system contractor give you with a “as built” schematic, which may include elements that were not included in the permit. If the house is equipped with a pump, request that the contractor and the local health agency supply specifics on how the pump was initially installed. In order to properly care for your septic system, you must manage it on a day-to-day basis as well as perform periodic maintenance and repairs. Layout of a septic system.

  • However, the drainfield does not have an indefinite capacity. The average daily water use per person is 50 gallons. Even for brief periods of time, the soil drainfield has a maximum daily design capacity of 120 gallons per bedroom, which is routinely exceeded. Overloads can occur at any time of year, on a daily basis, or on weekends. Fix any leaky faucets or toilets you may have. Water conservation will help you get more use out of your system.

Keep waste disposal to sewage alone.

  • It is not acceptable to utilize your septic tank as a garbage can for items such as cigarette butts, tissues, feminine hygiene products, cotton swabs, cat litter, coffee grinds, or disposable diapers. Reduce the amount of time you use your garbage disposal. These contribute a significant amount of additional solids. It is not recommended to throw fat or cooking oil down the drain. You should avoid putting toxic chemicals into your system, such as solvents and oils. You should avoid using paint thinners and paint thinners that have been dumped. You should avoid disinfectants and pesticides. Conserve your funds. Most of the time, commercial septic tank additives are not required.

Ensure that the system is protected against physical harm (site maintenance).

  • Maintain a layer of plants on the soil over the drainfield to prevent soil erosion from occurring. Don’t drive your car above the system’s limits. Try to avoid building over the system or in the repair area. The natural shape of the terrain immediately downslope of the system should be preserved, and this region should be protected against excavation (cutting and filling). Neither asphalt nor concrete should be used to cover the tank or drainfield.

All wastewater should be disposed of in a system that has been authorized.

  • You shouldn’t install a separate pipe to transport washwater to a side ditch or into the woods. This is against the law

The house and the yard (site maintenance)

  • Conserve and preserve the area where your septic tank and drainfield are located
  • Trees that thrive in moist environments should be cut down and removed. Willows, elms, sweetgums, and certain maples are examples of such trees. Surface water should be diverted away from the tank and drainfield by landscaping the yard. Inspect the system to make sure that water from the roof, gutter, and foundation drains does not overflow
  • It is recommended that if your system is located at the base of a slope, you build a french drain to channel subterranean water. Ensure that drainage ditches, subsurface tiles, and drainage outlets are kept in good condition so that water may readily flow from them.

Sewage treatment system (Septic tank)

  • Tanks should be elevated if they are 6 inches or deeper below the surface. They offer quick and convenient access for solids measurement and pumping, as well as for cleaning the effluent filter. The rate at which sludge and scum build in the tank is measured. Make a note of this information and provide it to your expert pumper. Solids should be pushed out of the tank as necessary. Most septic tanks have two sections
  • It is necessary to have them drained out. More information about pumping frequency can be found in the Cooperative Extension Service document AG-439-13, Septic Systems and Their Maintenance, which is available online. It is not necessary to wait till your drainfield collapses before having your tank pumped. By that time, the drainfield may have been completely destroyed. An ounce of prevention is worth a pound of cure when it comes to septic systems.
Preventive Maintenance Record
Date Work Done Firm Cost
Your Septic System Installer
Name:
Address:
Phone:
Date System Installed:
  • Tanks should be elevated if they are 6 inches or deeper below the ground. They offer quick and convenient access for solids measurement and pumping, as well as for cleaning the effluent filter
  • The rate at which sludge and scum build in the tank is being measured here. Make a note of this information with your expert pumper. Keep the tank clean by pumping solids out of it as necessary. Get both compartments of your septic tank pumped because most of them do. Additional information about pumping frequency can be found in the Cooperative Extension Service article AG-439-13, Septic Systems and Their Maintenance. Don’t put off having your tank pumped until your drainfield collapses. This may be too late to save the drainfield. It is said that an ounce of prevention is worth a pound of cure when it comes to septic systems.

Regulations and safeguards are necessary.

  • Any system that includes a pump should be operated by a state-certified subsurface system operator. In the case of low pressure pipe (LPP) systems erected or repaired after July 1, 1992, as well as underground drip irrigation systems, aerobic treatment units (ATUs), peat biofilters, sand biofilters, textile biofilters, and other sophisticated systems, a permit will be required by law. Those interested in obtaining a list of state-certified subsurface system operators should contact the North Carolina Water Pollution Control System Certification Commission at 919-707-9089. Between planned maintenance visits, check to see that the pump and electrical components are still in proper operating order. Germs found in sewage have the potential to cause disease. Never go into a septic tank unless absolutely necessary. Toxic and explosive gases are present in the tank, posing a threat. Tanks that are more than a decade old may collapse. Electrical controls provide a risk of electric shock and sparking. Children should not be able to open the septic tank lid, hence it should be secured. Do not attempt to repair a malfunctioning system on your own time. Obtain a repair permit and employ a contractor with extensive expertise

For further information about septic systems, speak with an Extension agent in your county or the local public health agency. This paper is an updated version of a previous publication. It is with gratitude that we acknowledge Tom Konsler (Orange County Health Department), Deanna Osmond, Mitch Woodward, and Grace Lawrence (North Carolina Cooperative Extension) for their contributions to the document’s peer review, as well as Debra Ireland for her work on the document’s graphic design, layout, and editing.

Discrimination and harassment are prohibited at North Carolina Cooperative Extension, regardless of age, color, handicap, family and marital status, gender identity, national origin, political opinions, racism, religion, sex (including pregnancy), sexual orientation, or veteran status.

Leave a Comment

Your email address will not be published. Required fields are marked *