How To Beter A 1 Chamber Septic Tank?

What is the difference between chamber and pipe septic systems?

The trench for the chamber is completed with 1/3 the amount of gravel than the pipe system receives OR the pipe system has 3 times the amount of gravel of the chamber system. The gravel is the “filter” for the septic water that leaves the tank.

How can I make my septic tank work better?

How to Keep Your Septic System Healthy

How the Septic System Works.
Don’t Overload the Septic Tank and Drain field.
Use an Efficient Toilet.

Don’t Treat the Toilet as a Garbage Disposal.
Don’t Pour Grease Down the Drain.
Divert Rain Water From the Septic Drain Field.

Keep Trees Away from the Septic System.

How do I increase septic tank capacity?

The simplest way to add to your septic tank while remaining connected to existing sewer lines is to simply add an additional septic tank. This gives your home a larger wastewater capacity, and gives your septic system more time to treat the wastewater before draining.

Should you add anything to your septic tank?

There is little scientific data to suggest that you should add bacteria or enzymes to your septic system. The United States Environmental Protection Agency reported that biological additives do not appear to improve the performance of healthy septic tanks.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

Regularly inspect and maintain your septic system.

Pump your septic tank as needed.
Keep your septic tank lids closed and secured.
Be water-wise.

Direct water from land and roof drains away from the drainfield.
Landscape with love.
Keep septic tank lids easily accessible.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

What happens if septic tank is too small?

An adequately sized septic system may only need pumping every two to five years on average. If the septic tank is too small or the drain field is in danger of overloading, homeowners may consider pumping the tank once or twice per year until they can renovate and enlarge the system.

How long will a leach field last?

Under normal conditions and good care, a leach-field will last for 50 years or more. Concrete septic tanks are sturdy and reliable but not indestructible.

What happens if your leach field is too small?

If drain field soil becomes compacted, then the very small pockets of air that lie between soil particles are eliminated and the aerobic bacteria can die. When these bacteria die off, they cannot clarify wastewater properly.

Do I need to add enzymes to my septic tank?

But septic tanks don’t really need help from extra additives. As long as you are only putting wastewater and toilet paper down the pipes, the tank can take care of its job on its own. Putting anything extra in can cause more harm than good and it’s best to stick to the tanks natural ecosystem when possible.

Is Ridex good for a septic system?

How additives, like Rid-x, interfere with your septic system’s eco-system. According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

Can you put too much bacteria in a septic tank?

Too much of a good thing can cause problems. A septic system relies on the correct balance of bacteria to do its job. An overpopulation of bacteria can deplete the oxygen in the septic tank and turn the environment septic. A septic, septic system is one in which the ecosystem within the tank is out of balance.

How can I increase bacteria in my septic tank naturally?

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

What are the do’s and don’ts of a septic tank?

DON’T flush material that will not easily decompose, such as hair, diapers, cigarette butts, matches, or feminine hygiene products. DO conserve water to avoid overloading the system. They kill the bacteria needed to decompose wastes in the septic tank and drain field. DO use substitutes for household hazardous waste.

Types of Septic Systems

Septic system design and size can differ significantly from one neighborhood to the next, as well as throughout the country, due to a variety of variables. Household size, soil type, slope of the site, lot size, closeness to sensitive water bodies, weather conditions, and even municipal ordinances are all considerations to take into consideration. The following are 10 of the most often encountered septic system configurations. It should be noted that this is not an exhaustive list; there are several additional types of septic systems.

Septic Tank, Conventional System, Chamber System, Drip Distribution System, Aerobic Treatment Unit, Mound Systems, Recirculating Sand Filter System, Evapotranspiration System, Constructed Wetland System, Cluster / Community System, etc.

Septic Tank

Septic Tank; Conventional System; Chamber System; Drip Distribution System; Aerobic Treatment Unit; Mound Systems; Recirculating Sand Filter System; Evapotranspiration System; Constructed Wetland System; Cluster / Community System; Septic Tank.

Conventional System

Septic tanks and trench or bed subsurface wastewater infiltration systems are two types of decentralized wastewater treatment systems (drainfield). When it comes to single-family homes and small businesses, a traditional septic system is the most common type of system. For decades, people have used a gravel/stone drainfield as a method of water drainage. The term is derived from the process of constructing the drainfield. A short underground trench made of stone or gravel collects wastewater from the septic tank in this configuration, which is commonly used.

Effluent filters through the stone and is further cleaned by microorganisms once it reaches the soil below the gravel/stone trench, which is located below the trench.

Chamber System

Gravelless drainfields have been regularly utilized in various states for more than 30 years and have evolved into a standard technology that has mostly replaced gravel systems. Various configurations are possible, including open-bottom chambers, pipe that has been clothed, and synthetic materials such as expanded polystyrene media. Gravelless systems can be constructed entirely of recycled materials, resulting in considerable reductions in carbon dioxide emissions during their lifetime. The chamber system is a type of gravelless system that can be used as an example.

The key advantage of the chamber system is the enhanced simplicity with which it can be delivered and built.

This sort of system is made up of a number of chambers that are connected to one another.

The region surrounding and above the chambers is completely covered with earth. Pipes convey effluent from the septic tank to the chambers. The wastewater comes into touch with the earth when it is contained within the chambers. The effluent is treated by microbes that live on or near the soil.

Drip Distribution System

Since the 1980s, gravelless drainfields have been widely employed in several states, becoming a standard technique that has mostly replaced gravel systems. Various configurations are possible, including open-bottom chambers, pipe that has been clothed, and synthetic materials like expanded polystyrene media. A large reduction in carbon footprint may be achieved by manufacturing gravelless systems from recycled materials. The chamber system is an illustration of a gravelless system. As an alternative to the gravel/stone system, a chamber system can be used instead.

These systems are also well suited to areas with high groundwater tables, where the volume of influent to the septic system is variable (e.g., at a vacation home or seasonal inn), in areas with a scarcity of gravel, and in areas where other technologies, such as plastic chambers, are widely available.

A thick layer of earth covers the ground surrounding and above the chambers.

The wastewater comes into touch with the soil as it is being processed via the chambers.

Aerobic Treatment Unit

Aerobic Treatment Units (ATUs) are small-scale wastewater treatment facilities that employ many of the same procedures as a municipal sewage plant. An aerobic system adds oxygen to the treatment tank using a pump. The added oxygen stimulates natural bacterial activity inside the system that subsequently offers further treatment for nutrients in the effluent. It is possible that certain aerobic systems may additionally include a pretreatment tank as well as a final treatment tank that will include disinfection in order to further lower pathogen levels.

ATUs should be maintained on a regular basis during their service life.

Mound Systems

Using mound systems in regions with short soil depth, high groundwater levels, or shallow bedrock might be a good alternative. A drainfield trench has been dug through the sand mound that was erected. The effluent from the septic tank runs into a pump chamber, where it is pumped to the mound in the amounts recommended. During its release to the trench, the effluent filters through the sand and is dispersed into the native soil, where it continues to be treated. However, while mound systems can be an effective solution for some soil conditions, they demand a significant amount of land and require regular care.

Recirculating Sand Filter System

Sand filter systems can be built either above or below ground, depending on the use. The effluent is discharged from the septic tank into a pump compartment. Afterwards, it is pushed into the sand filter. The sand filter is often made of PVC or a concrete box that is filled with a sand-like substance. The effluent is pushed through the pipes at the top of the filter under low pressure to the drain. As the effluent exits the pipelines, it is treated as it passes through the sand filtering system.

However, sand filters are more costly than a standard septic system because they provide a higher level of nutrient treatment and are thus better suited for areas with high water tables or that are adjacent to bodies of water.

Evapotranspiration System

Evaporative cooling systems feature drainfields that are one-of-a-kind. It is necessary to line the drainfield at the base of the evapotranspiration system with a waterproof material. Following the entry of the effluent into the drainfield, it evaporates into the atmosphere. At the same time, the sewage never filters into the soil and never enters groundwater, unlike other septic system designs. It is only in particular climatic circumstances that evapotranspiration systems are effective. The environment must be desert, with plenty of heat and sunshine, and no precipitation.

Constructed Wetland System

Construction of a manufactured wetland is intended to simulate the treatment processes that occur in natural wetland areas. Wastewater goes from the septic tank and into the wetland cell, where it is treated. Afterwards, the wastewater goes into the media, where it is cleaned by microorganisms, plants, and other media that eliminate pathogens and nutrients. Typically, a wetland cell is constructed with an impermeable liner, gravel and sand fill, and the necessary wetland plants, all of which must be capable of withstanding the constant saturation of the surrounding environment.

As wastewater travels through the wetland, it may escape the wetland and flow onto a drainfield, where it will undergo more wastewater treatment before being absorbed into the soil by bacteria.

Cluster / Community System

In certain cases, a decentralized wastewater treatment system is owned by a group of people and is responsible for collecting wastewater from two or more residences or buildings and transporting it to a treatment and dispersal system placed on a suitable location near the dwellings or buildings. Cluster systems are widespread in settings like rural subdivisions, where they may be found in large numbers.

Why Dual Compartment Septic Tanks Are Beneficial – Northland Septic Maintenance

When it comes to wastewater treatment for properties that aren’t linked to a municipal sewage system, septic tanks are critical components of the solution. When wastewater exits a residence, it is channeled into a holding tank, where sediments are collected, broken down, and held until the effluent is discharged to a drainage field. Single compartment tanks have traditionally been used in the construction of septic systems, however multi compartment tanks are becoming increasingly common. The next section provides some insight into why this is advantageous.

Why You Should Consider Installing a Dual Compartment Septic Tank

Even with single compartment septic tanks, there is a considerable probability that materials that are not completely digested will leak out into the drainfield. The addition of a second compartment gives an additional treatment space for solids to settle and more waste to be broken down.

The vertical wall is positioned in such a way that it aids in the more efficient trapping of particles, allowing for cleaner effluent flow and improved protection of the drainfield.

Save Money

One with a single compartment will be able to hold significantly less wastewater than one with two compartments would be able to hold. This implies that it will not need to be pumped as frequently, resulting in lower maintenance expenses. Aside from that, the overflow of polluted effluent will eventually cause drainfield blockage and failure if there isn’t enough additional room for solids to go through another purification procedure. As a result, property owners may incur significant cleanup and restoration costs.

The experts at Northland Septic Maintenance can assist you in selecting the most appropriate tank for your property and in maintaining it in good shape for many years to come.

In order to discuss your tank options, please call (888) 454-4999 or visit their website to learn more about getting a new installation or replacement done.

Septic Tank Pumping

Septic tanks are used in the vast majority of on-lot sewage systems nowadays. The subject of how frequently a septic tank should be pumped has been a source of contention for several decades. For example, there are some homeowners who say they have never drained their septic tank and that it “appears” to be in fine working condition. While trying to establish a standard pumping strategy, authorities have taken a more conservative approach and have declared that all septic tanks should be pump out every two to three years.

How a Septic Tank Works

It is common for septic tanks to be used in conjunction with on-lot sewage systems. Many years have passed since the dispute over how often a septic tank should be pumped began. For example, there are homeowners who say that they have never drained their septic tank and that it “appears” to be in fine working order. While trying to establish a standard pumping strategy, authorities have taken a more conservative approach and have suggested that all septic tanks should be pump out every two or three years.

Number of bedrooms in the home	Estimated daily flow (gallons/day)	Minimum septic tank size (gallons)
3	400	900
4	500	1,250
5	600	1,400
6	700	1,550

How Frequent should a Septic Tank be Pumped?

Pumping frequency is determined by a number of parameters, including:

The capacity of the septic tank
The amount of wastewater that is put to the septic tank each day (see Table 1)

The amount of solids in a wastewater stream is measured. In this regard, it should be noted that there are various different types of particles that are regularly dumped into a septic system. This group of solids includes (1) biodegradable “organic” solids such as feces (see Box 1), (2) slowly biodegradable “organic” solids such as toilet paper and cellulosic compounds, which take a long time to biodegrade in the septic tank, and (3) non-biodegradable solids such as kitty litter, plastics, and other non-biodegradable materials, which do not biodegrade and quickly fill the septic tank It is possible to significantly reduce the quantity of slowly biodegradable organics and non-biodegradable trash that is introduced to your septic tank by reducing the amount of organic waste that is added to the tank.

Another factor that influences how soon a septic tank will fill with solids is one’s way of living. In terms of septic tank function, the two most essential aspects of one’s lifestyle are as follows: A person’s way of living has an impact on how quickly a septic tank fills with sediments. In terms of septic tank function, the two most significant aspects of one’s lifestyle are the following:

Is It Time To Pump Your Septic Tank?

So, how does one go about determining how frequently a septic tank needs be cleaned? We are aware that residences who dispose of huge volumes of non-biodegradable and slowly biodegradable organic waste into their septic tank require more frequent pumping. It is also known that prior to the time at which the collected solids have accumulated to the point that they are being taken with the tank effluent to the absorption region, the septic tank should be pump out. When it comes to determining when (and how frequently) to pump your septic tank, there are two generally safe ways to use.

The alternative method is to open the access port to the first chamber (as shown in Figure 1) once a year and insert a long pole to the bottom of the tank and then pull it out of the tank.

If the sludge has accumulated to more than one-third of the tank’s total depth, it is time to have it drained out completely. The majority of households will benefit from having their tanks drained every two or three years instead.

The Pumping Process

Contractors who specialize in septic tank pumping and hauling can pump your septic tank. It is a good idea to be present to check that everything is completed correctly. For the material to be extracted from the tank, it is necessary to break up the scum layer, and the sludge layer must be combined with the liquid section of the tank. In most cases, this is accomplished by alternately pumping liquid out of the tank and re-injecting it into the bottom of the tank. Not the little intake or outlet inspection openings situated above each baffle, but the two huge central access ports (manholes) are required for pumping the septic tank.

It is not suggested to use additives in septic tanks to minimize the volume of sludge or as a substitute for pumping in order to achieve these goals.
When you have your septic tank pumped, you should consider taking an additional step to ensure that your septic system continues to perform correctly for a long time.
This inspector can tell you whether or not your septic tank needs to be repaired, as well as whether or not other components of your sewage system require upkeep.

Mark the position of the tank as well, so that it may be found simply in the future for pumping.

Schedule Septic Tank Pumping

Your septic tank may be pumped by septic tank pumping and hauling professionals. Attending to the task to ensure that it is completed correctly is a wise decision. This requires the scum layer to be broken up and combined with the liquid component of the tank in order to fully recover the material from the tank. As a general rule, this is accomplished by alternately pumping liquid from the tank and injecting it into the tank’s bottom. Not the little intake or outlet inspection openings placed above each baffle, but the two huge central access ports (manholes) must be used to pump the septic tank.

There are no recommendations for the use of additives in septic tanks to minimize the volume of sludge or to serve as a substitute for pumping.

Once your septic tank has been cleaned and pumped, you may want to consider taking an additional step to ensure that your septic system continues to perform correctly for a long period of time.

If your septic tank is in need of repair or if any other components of your septic system require upkeep, this inspector can notify you about it.

Install risers from the central access ports and inspection ports to the soil surface in order to make future cleaning and inspection easier. Mark the position of the tank as well, so that it may be found easily in the future for pumping purposes.

Summary

A septic tank is simply one component of a complete on-site wastewater treatment system. Its purpose is to remove solids from the effluent prior to it reaching the soil absorption region, to allow for the digestion of a part of those solids, and to store the remainder of the solids in a holding tank. It is not necessary to use biological or chemical additions to enhance or speed the breakdown process. Grinders contribute to the solids load on the system by reducing the size of garbage. Solids must be removed on a regular basis in order to prevent them from accessing the soil absorption zone.

For additional assistance contact

Your local Sewage Enforcement Officer or Extension Educator can help you with these issues. A contact for the Pennsylvania Association of Sewage Enforcement Officers (PASEO) is as follows:4902 Carlisle Pike,268Mechanicsburg, PA 17050 Phone: 717-761-8648 Email: [email protected] Philadelphia, PA 18016 717-763-7762 [email protected] Pennsylvania Septage Management Association (PSMA)P.O. Box 144 Bethlehem, PA 18016 717-763-7762

How a Septic System Works


The septic system is a sewage treatment and disposal system.A basic system consists of a septic tank and drainage area. All flows from the house are directed by way of a main sewer line to the septic tank. 40% of household sewage is from the toilet, 30% is from bathing, 15% is from laundry and 10% is from the kitchen.

What is a Septic Tank?

The septic tank is a watertight chamber constructed of concrete or poly material. An average size is approximately 1000 gallons to 1500 gallons in capacity. Most septic tanks have one or two compartments. Two compartment tanks, or two single compartment tanks in series, provide better settling of the solids.Each septic tank has an inspection port over each baffle as well as a manhole access port. The manhole lid needs to be accessed for the tank to be pumped. These can be found at or below the ground surface. Typically you will find 4” diameter plastic lids at the ground surface that are the inspection ports over either of the baffles on the tank and not where the tank is to be pumped through.The baffles of the tank are one of the most important components in the septic tank. The inlet baffle forces the wastewater from the sewer line down into the tank instead of across the surface of the tank and into the outlet pipe leading to the absorption area. The outlet baffle prevents the scum layer from moving into the soil absorption area. In a properly functioning septic tank the solids and sludge settle to the bottom and accumulate, scum (lightweight materials including paper, fats and greases) rises to the surface and the effluent (liquid) in the tank existing between those layers overflows to the absorption area.

The absorption area uses the ability of the stone and soil to filter and treat the remaining effluent. Examples of absorption areas are seepage beds, trenches, sand mounds or older cesspools / seepage pits. A cesspool is a block walled dirt bottom pit. Cesspools are no longer an installation choice but there are many properties that still have functioning cesspools. Odors and gasses from the septic system, that are always present, are vented through pipes on the house roof.For further information: -On Lot Sewage System Owner Manual -A Homeowner’s Guide to Septic Systems – by EPA

Concrete Septic Tanks Are Probably The Best Option — Build With a Bang

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.

Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.

” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.

The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. In general, two compartment tanks perform better at filtering and separating waste than one compartment tanks, which is why they are preferred by septic experts over single compartment tanks.” “The most common size for domestic use is a 1000 gallon septic tank, which can accommodate the majority of 0-3 bedroom homes.” ”

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most popular 1000 gallon concrete precast tanks are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh nearly 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

In addition, many of these bigger tank sizes are so massive that rebar and wire mesh are required within the walls and between layers to provide additional strength, stability, and durability.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

Preserving the septic tank by keeping scum, oils, and solid waste contained inside
It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and causing leaks through root damage. However, caution must be exercised during installation because heavy machinery can easily damage a tank due to its thinner profile and lighter material makeup. Fiberglass and plastic tanks, like concrete tanks, can be damaged if too much weight is placed on the surface above them.

Although plastic and fiberglass tanks are durable, they can still leak under certain conditions.

Before making a selection on a particular material, it is essential to contact with an experienced septic installer. Lot size, tank placement, ground water levels, and weather can all have an impact on the final decision.

Float

Plastic and fiberglass have a number of advantages, but they can also be problematic. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

A layer of sludge settles to the bottom of the container.

4.
Scum is mostly constituted of fats, greases, and oils, among other substances.
Grease and oils float to the surface of the water.

(5) A filter stops the majority of particles from reaching the exit pipe.
The effluent is discharged into the drain field.
Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.

When gravel is used to surround pipes, water can run into the soil and oxygen can reach germs. The garbage is completely decomposed by aerobic bacteria found in gravel and dirt. 9. Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank. However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

Keep the effluent filter in place since it is required by your state’s health law.
Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.

Your filter, on the other hand, should not require cleaning every six months.
A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.

Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.

For additional information on what should and should not be flushed down the toilet, contact your local health authority. More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall health necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. A contractor should be consulted about alternative possibilities because the costs might be quite expensive.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.