The average cost to replace a distribution box is between $600-1300.
How much does it cost to replace the distribution box on a septic system?
Septic Distribution Box Replacement Cost Replacing a septic distribution box costs between $500 and $1,500. This component is also called the D-box. It is very important, responsible for controlling the even distribution of wastewater into the leach field.
Can you replace a distribution box?
Remove the damaged distribution box. Simply wiggle the box toward the leach field pipes until the inlet pipe from the tank comes loose. Pull the box back toward the removed inlet pipe to remove the pipes going to the leach field. Level the ground, where the new distribution box will go.
How long do distribution boxes last?
The steel tanks can last about fifteen to twenty years. They will need to be replaced after this time, as they tend to rust. It takes about forty years for a concrete septic tank to last.
How long does a concrete distribution box last?
Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.
How much does ad box cost?
In the state of California, truckside ads are expected to cost between $1500- 50,000.
How deep is a septic distribution box?
The D-box is normally not very deep, often between 6″ and two feet to the top of the box. You may also see a pattern of parallel depressions, typically about 5 feet apart, that mark the individual drainfield leach lines. The D-box will at or near end of the drainfield area that is closest to the septic tank.
Should there be water in septic distribution box?
A septic system distribution box should not be full of water. As effluent water leaves the septic tank towards the drain field, it first enters the distribution box. If the distribution box is full, there is a problem with clogged leach lines or a failing drain field.
Can a distribution box get clogged?
One of the most common septic tank problems arises when the distribution box is damaged or clogged, preventing the flow of water from the septic tank into the drainfield. In most cases, a qualified plumber can fix this problem quickly and easily before it becomes a serious issue for the household septic tank system.
How big is a septic distribution box?
These distribution boxes are offered in 3 sizes: 4-Hole Distribution Boxes can handle up to 3 field lines, 6-Hole Distribution Boxes can handle up to 5 field lines, and 8-Hole Distribution Boxes can handle up to 7 field lines.
What is the average life of a septic system?
Age of the System It’s pretty common for a septic system to last 40 years or longer, which means if you buy a new home, you might never need to replace it. However, you might have an older home whose septic system has been in place for nearly half a century.
How often should a septic tank be replaced?
Typical lifespan is in excess of 30 years for GRP, PE and concrete tanks. Assuming optimal conditions of install and use, you could expect the following: Steel septic tanks have a life expectancy of 15 to 20 years.
Can a septic system last forever?
How long does a septic system last? On average, a new septic system will last for 20-30 years. Soil quality – the quality of soil will determine how durable your septic tank is. For instance, acidic groundwater can corrode a concrete septic tank.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn’t working the right way you will soon be dealing with leach field failure.
How often does a 2000 gallon holding tank need to be pumped?
How often does my holding tank need to be pumped? A holding tank may need to be pumped every 30 to 90 days depending on how much waste is generated and the size of the tank.
How long does a 1000 gallon septic tank last?
A septic tank depends largely on the pump and the family usage. That is, a 1,000-gallon tank would most likely last more than 20 years (on average), while a 500-gallon tank might only last 10-15 years under similar conditions.
How much does a distribution box for a septic system cost?
Average installation prices range between $6,000 and $10,000 for a sand filters septic system. This system is similar to a typical septic system, except that it employs a pump to transfer the effluent to a filtersystem—sand contained in either a concrete or PVC-linedbox, as well as a grid of tiny pipes. The distribution box is located in the area between the septic tank and the drain field. All of the effluent from the septic tank goes to the distribution box, where it is subsequently released onto the drainage field, as described above.
Therefore, the issue is, how long does a septic distribution box function properly?
After this period, they are prone to rusting and will need to be completely replaced.
In addition, do all septic systems have a distribution box installed?
As soon as the effluent has been separated in the septic tank, it is dispensed into the leach field through the distribution box, which is placed in the leach field.
Except for water, you should have nothing in your lines or dropboxes.
Septic Tank Costs
The cost of a septic tank includes the installation, maintenance, and repair of the tank system, which will vary depending on the type of septic tank system you choose. Continue reading to find out how much the tank will cost. People who live in metropolitan areas may not be familiar with the phrase “septic tank,” but those who live in distant or rural locations are almost certainly familiar with it. During the course of a day, the water from the sink, draining from the sink when washing hands, or taking a bath, collects in the septic tank and becomes a clog.
In cities, on the other hand, a typical drainage system is frequently in charge of dealing with the waste water.
Most of the time, these tanks are built underground, with a system in place to ensure that utilized water flows into the tank and out of it at the same time.
The Septic Tank Price
The size and type of the septic tank are the two most important criteria in determining its cost. The price of a tank will increase in proportion to its size. Concrete, steel, and fiberglass are the most common materials used to construct these tanks. Septic tanks built of concrete are typically seen in regions where installation is required since these tanks may give great service for several years without requiring much maintenance.
The normal size for a septic tank is one that holds 1000 gallons (4000 liters) of water, and the cost ranges from $500 to $700 depending on the manufacturer.
It is necessary to obtain prior approval from the local health department prior to beginning the installation work on your septic tank. In order to obtain authorization, you will need to pay a specified sum, which is referred to as the permit fee, in order to do so. The payment is normally in the region of $300-350 dollars every year. In order to obtain approval, the local health department will want you to submit drawings that show the design and layout of the septic tank in question. After evaluating the septic drawing and confirming that the design does not violate any environmental regulations, the relevant authorities will provide permission, which is often granted within 2-3 weeks of the inspection.
Original Installation Cost
The cost of installing septic tanks is determined by the type of septic system being installed as well as the labor rate, which varies from location to location. The ones that are most frequently used are as follows:
- Drainfield and gravel septic systems
- Pressure systems
- And other systems Aerobic wastewater treatment systems
- Peat filter septic systems
- Aerobic wastewater treatment systems
septic systems with drainfields and gravel; pressurized septic systems Peat filter septic systems; anaerobic wastewater treatment systems
Different septic systems need less or more frequent maintenance depending on their design. For a new drainfield septic system, the yearly maintenance costs will range between $30 and $500. The solid waste material that accumulates in the septic tank will eventually need to be removed by pumping. The standard gravel septic systems must be pumped out once every 1-3 years, depending on the size of the system. In the event that you have built a peat filtration system, the annual maintenance fee might reach up to $1,700 dollars.
- Performing regular maintenance on the tank includes pumping the water out of it.
- There are specialists that can complete this task quickly and efficiently for a fee ranging from $150 to $250 every visit.
- A buildup of solid waste in the drainfield might result in undesired weed growth and the formation of a sludge-like layer.
- The baffles in septic tanks are yet another crucial part of the system.
- Baffles are installed in the tank to prevent water from escaping the tank at an excessively rapid rate.
- It is estimated that the cost of installing a new septic tank baffle will range between $200 and $400.
- The cost of putting in a new distribution box would be around $600-800, depending on your budget.
Over time, the pipes that transport solid waste and used water to the septic tank get blocked with solid waste and used water. Additionally to the pumping expense, you will need to spend an additional $50-250 for the pipes to be cleared and the regular flow of water to be restored.
It is necessary to perform several types of septic system maintenance. For a new drainfield septic system, the yearly maintenance cost will be between $30 and $500. The solid waste material that accumulates in your septic tank will eventually need to be removed by pumping. Every 1-3 years, the standard gravel septic systems must be dug up and drained out of the soil. If you have a peat filtration system installed, the annual maintenance fee might be as high as $1700 per system. Enza powder, for example, is one of the most often used items for keeping a septic system in good working order.
- Performing regular maintenance on the tank includes pumping.
- Professionals may complete this task quickly and efficiently for a fee ranging from $150 to $250 each visit.
- Unwanted weed growth and a sludge-like coating in the drainfield can occur when there is an excessive amount of solid waste migrating into the drainfield.
- The baffles in septic tanks are yet another crucial component.
- A system of baffles is installed within the tank to keep water from escaping the tank too quickly.
- The cost of installing a new septic tank baffle can range anywhere from $200 and $400 per baffle.
- Put another way, the expense of installing a new distribution box would cost you between $600-$800.
- Additionally to the pumping fee, you will have to spend an additional $50-$250 to clean the pipes and restore regular water flow.
Learn how much it costs to Repair a Septic Tank.
Septic tank repairs cost an average of $1,749, with the majority of homes spending between $629 and $2,904 on average. Major repairs, on the other hand, might cost $5,000 or more. On the low end, you’ll pay at the very least a call out cost of $100 to $300, which includes the journey out, overhead, and, in many cases, the first hour of service.
Septic Tank Repair Cost Calculator
Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?
|Typical Range||$629 – $2,904|
|Low End – High End||$160 – $6,000|
The cost information in this report is based on real project costs provided by 1483 HomeAdvisor members.
Septic Repair Costs by Part
It is based on 1,483 HomeAdvisor members’ actual project expenses, which were submitted to the company.
Septic Tank Filter Repair or Replacement Cost
Installing a high-quality filter for your tank will cost you between $200 to $300. If you see any symptoms of clogging or backup, you should get this one examined on an annual basis or whenever there is backup.
Septic Tank Outlet Baffle Repair Cost
The typical cost of repairing a baffle ranges from $300 to $900. If it’s difficult to get there, you may have to pay extra. The baffle aids in the prevention of accumulation in the tank’s incoming or departing pipes. The heavier solid stuff settles in the space between the baffles of the hopper.
Septic Pump Repair Cost
The typical cost of repairing a sewage pump is $250 to $400. The expense of replacing one is $1,000 or more. The cost of a new pump ranges from $250 to $1,000. When repairing a pump, make careful to inspect the filters to ensure that big particles do not enter the system.
Septic Line Repair Cost
Average septic line repairs cost $2,500 but can cost anywhere from $1,100 to $4,200 depending on the severity of the damage. The function and expense are similar to those of a standard sewage line. Pipes are used in septic systems to transport domestic waste to the tank and wastewater from the tank to the drain field, respectively.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,500 to $9,500. Depending on the size of the tank, it will cost between $600 and $4,000, plus an extra $500 to $1,000 for gravel, stone, fill earth, and topsoil to properly install the tank. Many states require that a qualified plumber connect the septic tank to the house before it may be used. Some jurisdictions let the tank installer to connect to the plumbing, but it’s always a good idea to double-check and make sure everything is done correctly, and that all contractors are fully licensed for the job being performed, before proceeding with the installation.
Replacing Bacteria in an Aerobic Unit
In an Aerobic septic system, it will cost between $400 and $600 to replace the bacterium in the system. Treatment units, as opposed to classic anaerobic units, employ an aeration system to break down waste more quickly. When these units are left inactive for an extended length of time, the bacteria in them might die, necessitating the replacement of the bacteria in order for the system to function correctly again.
Compare Local Estimates From Septic Tank Pros
Return to the top of the page
Drain or Leach Field Repair Cost
Repairing a leach field might cost anything from $2,000 to $15,000. The ultimate cost is influenced by several factors, including the size of the field, accessibility, and damage. The drain field of a septic system, which is an area of land set aside for the purpose of filtering water from the septic tank, does not survive indefinitely. Eventually, grease and solid waste will leak into the drain field if the top and bottom layers of the tank become so thick that there is no room for water to pass through them.
It is possible that naturally occurring bacteria will choke the soil to the point where digging a new drain field will be the only alternative.
Septic Tank Maintenance
Regular septic tank maintenance enables homeowners to spot possible repairs at the first symptoms of deterioration, so avoiding unneeded and expensive repairs in the future. On average, septic tank cleaning costs between $300 and $500. Every year, hire a septic tank cleaning business in your area. This helps to avoid the accumulation of scum and sludge and gives you the opportunity to check the system for any possible problems. Tank pumping expenses might soar dramatically in an emergency situation.
It is possible to prevent clogs and backups in your tank by using solutions such as Rid-X to assist the naturally existing bacteria in your tank in breaking down solid waste. This can eliminate the need for an emergency pump-out.
Septic Tank Inspection Cost
Regular septic tank maintenance enables homeowners to spot possible repairs at the first symptoms of deterioration, so avoiding unneeded and expensive repairs in the long run. On average, septic tank cleaning costs between $300 and $500 per unit of time. Employ the services of an experienced, local septic tank cleaning firm on an annual basis. This helps to avoid the accumulation of scum and sludge and gives you the opportunity to check the system for any possible problems before they occur. Tank pumping prices might increase in an emergency situation, causing financial ruin.
Talk To Local Septic Tank Repair Pros for Quotes
Return to the top of the page
DIY Septic Tank Repair vs. Hire a Pro
While it is certainly feasible to do certain repairs to your septic system on your own, why would you want to do that? It’s messy, risky labor that necessitates a thorough grasp of the systems involved in order to perform the job effectively. Improperly installed systems can result in leach field failure, which can result in a repair bill of up to $20,000 in some cases. Engage the services of a septic system repair specialist in your area. Not only will they do the task fast, but they will also:
- While it is certainly feasible to perform certain septic system repairs on your own, why would you want to? It’s messy and risky labor that necessitates a thorough grasp of the systems involved in order to complete the job effectively and efficiently. A leach field failure caused by an incorrectly installed system might cost you as much as $20,000 to repair. Septic system repair should be left to the experts. Apart from completing the work swiftly, they’ll also include the following features:
It is the septic tank, which is a waterproof box constructed of concrete or reinforced fiberglass, that is responsible for storing and disposing of household waste. In the event that waste enters the tank, organic material floats to the top of the water inside the tank, where bacteria convert it to a liquid, leaving solid material behind to sink to the bottom of the tank and accumulate in the form of a layer of sludge. The remaining water is then sent to a separate absorption area in the backyard.
How long does a septic tank last for?
As the portion of the system that contains and disposes of household waste, the septic tank is a waterproof box built of concrete or fiberglass reinforced concrete. Upon entering the tank, organic waste floats to the surface of the water inside the tank, where microorganisms convert it to a liquid, leaving solid waste to sink to the bottom of the tank and form a layer of sludge on the bottom of the tank. Water that is left over is sent to a separate absorption area in the yard.
What causes a leach field to fail?
It is possible for a leach field to fail if the tank, pump, or other component is not maintained correctly. To avoid failure, have your furnace cleaned and inspected by an expert on an annual basis.
What are the signs that a septic tank needs repair?
The following are some indications that your septic tank need repair:
- In the home, sewage stinks, and sewage backups occur. sewage that has risen to the surface in the vicinity of the tank or leach field
How can I avoid the need for repairs?
The most effective strategy to eliminate the need for repairs is to have your tank inspected annually and pumped every 1 to 5 years, depending on the tank’s age, size, and the number of people that live in your house, respectively. However, there are some basic things you can perform at home, such as the following:
- Nothing else should be flushed down the toilet except toilet paper. Drain filters can be used to trap hair in sinks and bathtubs. Do not flush your laundry or dishwater down the toilet or into the septic system. Make sure you don’t pour any oil or grease down the drain. If your septic system is old or you suspect that it may be in need of maintenance or repair, it is a good idea to purchase toilet paper that is specifically designed for recreational vehicles (RVs). This toilet paper decomposes much more quickly and easily than standard toilet tissue, making it an excellent choice for RVs. Although it might be difficult to locate at times, it is available in most sports goods stores, some grocery stores, and campgrounds.
Get Calls From Local Septic Tank Contractors for Repair Estimates
Septic tanks range in price from $3,157 to $10,451, with an average cost of $6,804 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
The two types of systems covered in this book are aerobic and anaerobic systems. This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?
|Typical Range||$3,157 – $10,451|
|Low End – High End||$450 – $21,000|
The cost information in this report is based on real project costs provided by 948 HomeAdvisor users.
New Septic System Cost
Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:
- Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
- Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
- Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Plastic and polymer materials cost $500–$2,500
- Concrete costs $700–$2,000
- And fiberglass costs $1,200–$2,000.
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield.
It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.
Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.
Replacement of the filter costs between $230 and $280.
Replacement of a tank lid costs between $30 and $70. Drain Field Replacement Cost: $7,500. When replacing an aerobic system, talk to your service expert about the advantages, disadvantages, and expenses of upgrading to a more efficient aerobic system.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- Initial inspection costs between $250 and $500
- Annual inspection costs between $100 and $150
- And camera inspection costs between $250 and $900.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.
Concrete Septic Tank Cost
According on the use, the material, and the size, septic tanks and septic pump tanks range in price from $350 to $14,000. In most home situations, you won’t have to spend more than $3,000 on the tank’s construction. Generally speaking, the larger, more expensive units are intended for use in residential complexes or as part of a communal sewage treatment system.
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs.
Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.
Labor Costs to Install a Septic System
The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.
A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
If these bacteria are discovered in your vicinity, you should investigate your septic system to determine if it is the cause. Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
- Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
Asked in the following category: General The most recent update was made on January 13th, 2020. How to Replace a Septic Distribution Box in 5 Easy Steps
- Find the Distribution Box on the first floor. It is not difficult to locate the box
- Nonetheless, 2 Excavations have taken place. Most of the time, the distribution box is buried and can only be revealed by digging into the earth with a spade. 3 Remove the Distribution Box from the room. Typically, a large number of pipes are routed into the box. 4 Identify a new location
- 5 bury the distribution box
The distribution box is located in the area between the septic tank and the drain field. All of the effluent from the septic tank goes to the distribution box, where it is subsequently released onto the drainage field, as described above. This package typically costs between $40 and $80. In addition to the foregoing, how long does a septic distribution box last? The Expected Lifespan of a SepticSystem Steel septic tanks have a lifespan of around fifteen to twenty years on average when properly maintained.
- Concrete septic tanks have a substantially longer lifespan – around forty years.
- Keep an eye out for a pattern in the grass that may show the precise position of the field lines.
- Follow these lines all the way back to your house.
- Is it true that all septic systems are equipped with distribution boxes?
- As soon as the effluent has been separated in the septic tank, it is dispensed into the leach field through the distribution box, which is placed in the leach field.
What is the Average Septic Tank Repair Cost? [Get an Estimate]
Many individuals believe that septic systems are uncommon in residential settings. But did you know that as many as one in every five American houses, particularly in rural regions such as Northern Georgia, is equipped with an aseptic tank? If your aseptic system is properly maintained and cared for, it should last you up to forty years or more. Septic tank accidents may happen, though, and you may find yourself in need of septic tank repair at some point. With this article, you’ll learn all you need to know about septic repair costs.
Average Septic Repair Cost
It is possible to pay between $750 and $3,000 on average for septic tank repairs. This might vary greatly depending on the extent of the damage to your septic tank or sewer lines.
What Goes Into a Septic Tank Repair Cost?
When you need maintenance done on your septic system, there are a variety of things that might influence your quotation.
Septic Tank Lid
The problem with your septic tank lid is simple to remedy.
The cost of this service ranges from $150 to $500. Septic tank lids are made to last a long time. External factors, on the other hand, might cause harm over time.
Septic Tank Lateral Lines
A ruptured septic lateral line is one of the more expensive repairs to do. The typical cost of repairing a damaged lateral line can range from $1,500 to $5,000 depending on the severity of the damage. In contrast, if it’s simply a smaller pipe, the expense won’t be nearly as prohibitive. On average, a burst pipe will cost roughly $600 to repair. Make certain that no heavy gear or cars are parked over your drain field, as this will assist to prevent your pipes from becoming damaged.
Septic Tank Baffle
Your baffle is responsible for directing wastewater through your tank. The cost of an aseptic tank baffle replacement can range from $50 to $250 on average, depending on the specifics of the repair or replacement required.
Septic Tank Distribution Box
The installation of an aseptic tank distribution box, commonly known as a D-Box, can cost anywhere between $500 and $1,500. The D-Box is responsible for controlling the distribution of wastewater. Damage to this system might result in an overflowing leach field in the future.
Leach Field Replacement
Your leach field (also known as your drain field) is the most expensive portion of your septic system to repair or replace. It is also the most difficult to maintain. Full leach field replacement might cost as much as $20,000, depending on the size of your system.
How Do I Know if My Septic System Needs Repair?
The majority of problems may be avoided by performing routine septic system maintenance. We recommend that you get your septic system pumped every three to five years in order to avoid obstructions and backups from occurring. In addition, by doing periodic maintenance, we can detect minor flaws before they develop into significant, costly ones. However, events do occur from time to time that are beyond our control. Here are some of the most typical indicators that your septic system need repair.
- The scent of rotting flesh emanating from your yard
- In your yard, near or over your septic system, there should be no standing water. You’re having trouble flushing your toilets, and you’re hearing gurgling noises every time you flush
- Sinks and showers that are taking too long to drain
- The presence of more vegetation and wildlife in your yard around or above your septic tank
From your yard, there is an aseptic odor. In your yard, near or over your septic system, there should be no standing water; Flushing your toilets is not working properly due to gurgling noises every time you flush; Sinks and showers that are taking too long to drain. Plant and animal life flourishing in your yard around or over yourseptic tank;
Why Do Septic Tanks Break?
When nature takes control, it might result in an extremely uncommon accident. It is fairly uncommon for homeowners to experience tree roots growing through their sewage line, causing the pipe to split. Heavy rains can also pose problems in a leach field, since they might prevent the area from draining correctly as it should. Other instances, overburdening a septic tank is the source of the problem. That’s what occurs when you overload your system with anything that isn’t solid waste and toilet paper that is safe for septic systems.
Helpful Tips for Maintaining Your Septic Tank
Make certain that your system receives adequate maintenance, that you do not use additives containing chemicals that might harm the beneficial bacteria, and that your drain field is well maintained.
If you get your septic tank drained every three to five years and reduce your water consumption, you should have no or very few problems with your drainage system.
How Much Does A Septic Tank Replacement Cost?
If you need to replace your aseptic tank, it might be a very expensive process. Your new system will cost you differently based on the type of system you choose, the septic tank you require, and the size of your septic tank, among other factors. In the case of a 1,250-gallon septic tank, the cost of a septic system will range between $1,500 and $5,000. This pricing range covers both the tank itself as well as the labor charges associated with installing it. The type of material you choose will have a significant impact on the cost.
- Plastic septic tank
- Concrete septic tank
- Steel septic tank
- Fiberglass septic tank
- And more types of septic tanks are available.
Types of Septic Systems
Installing an anaerobic septic system might help you save money on your septic system costs. Anaerobic septic systems are more cheap than aerobic septic systems. These do not require oxygen to maintain the health and viability of the beneficial bacteria in your septic system. The cost of installing them is between $2,000 and $5,000. An aerobic septic system makes use of beneficial bacteria that require oxygen in order to live in the environment they are in. Those who live in or near water will find these to be excellent choices.
- A septic tank installation will cost between $10,000 and $20,000, depending on the size of the tank.
- A mound system is a type of drainage system that employs elevated ditches to safely direct wastewater flow.
- The cost of installing them might range between $10,000 and $20,000 dollars.
- Conventional systems discharge their contents into an underground soil or gravel drain area.
- A chamber septic system is a type of septic tank system that does not require a burial and instead employs connected subterranean chambers rather than an open drainfield.
Northern Georgia’s Top-Rated Plumber
Septic system services are provided by The Original Plumber for residents in the Atlanta metro region. Contact us now to learn more! We are accessible 24 hours a day, 7 days a week to answer your questions. We realize that in an emergency situation, you may require your septic system to be drained immediately! Our septic services include the following:
- Septic system inspection, septic tank maintenance, septic tank installation, septic tank repair, septic tank pumping are all services that are available.
We’re pleased to be recognized as one of the finest septic tank repair businesses in Georgia. We take great satisfaction in our honesty and straightforward pricing, which ensures that you will not be caught off guard during the repair procedure. If you don’t notice any indicators of a malfunctioning septic system, it’s a good idea to get your system inspected to ensure it’s in correct working order.
Get a free quotation from The Original Plumber now, whether you have a failing septic system and need an aseptic system replacement or you just need routine pumping.
Distribution Box Replacement and Repair
Northboro Septic, Inc. retains ownership of the copyright and reserves all rights. TateDesign is responsible for the website design. Hussey Graphics is a company that creates flash diagrams. In addition to being one of the most experienced septic contractors in Central Massachusetts, Northboro Septic Service Inc. has a finely tuned working relationship with the Board of Health in each city and town in which we provide residential and commercial sewer installation and replacement, septic system repairs, septic tank pumping and cleaning, and maintenance, septic to town sewer conversions, and we have the lowest prices for Title 5 Inspections (Title V Inspections) in Worcester.
How to Change the Distribution Box on Your Septic Tank – And Why You Shouldn’t
This is the point at which everything begins. As I look out my front window at all of the beautiful daffodils blooming in anticipation of summer, I can’t help but recall some of the highlights from the previous year. Unfortunately, I only have one low-level memory (together with all of the surrounding images) that has been permanently engraved on my brain: the notorious day when I casually commented to my spouse, “Something smells nasty.” He responded in an offhanded manner, “I’m sure the dog got into something again,” and then proceeded to get on the lawnmower and begin mowing the grass.
- “Did you happen to fall into a woodchuck hole?” I inquired, just innocently.
- Upon closer inspection, I believe that is the distribution box for the septic system.
- At the very least, we had pinpointed the source of the odor.
- A few phone calls to local septic-service businesses (try Angie’s List.) and receiving prices ranging from $600 to $1,000 and everywhere in between, we were forced to make an unpopular decision.
- First and foremost, purchase a HazMat suit.
- Dig out the distribution box from all sides in order to ascertain the size, design, number of outlet pipes, and other specifications of the box.
- The cost of a distribution box is not too expensive; we paid roughly $50 for ours.
Cut the outlet pipes that lead from the sewage line to the distribution box as well as the outlet pipes that lead from the box to the leach field after that, if necessary.
The box is now free, but because of its concrete base, it weights around one metric ton, therefore it should be broken into pieces with a sledgehammer to make disposal simpler.
Fill a wheelbarrow with the contents of the box and move it out of the way.
Within a year or two, the entire thing should be entirely hidden by weeds and dandelions.a it’s win-win situation!
It’s critical that the box be leveled when it’s being used.
Because water should flow through each distribution pipe at a regular pace, this is important to note.
As a result, you must also backfill the hole.
Make sure all pipes are securely fastened together and that all junctions are properly sealed with sleeves.
Make a few test runs to ensure there is no leakage and that the flow rate is satisfactory; flush the toilet and run the sink or bathtub to get a sense of how much water is being wasted.
The box should be covered with at least 8-12 inches of compacted earth and sod to ensure that it is as sheltered as possible from the elements.
No amount of bathing, shampooing, scrubbing, or praying has been able to completely erase this recollection, and I wish I could say the same for you.
Liz is a professional picture framer situated in Central New York who specializes in custom framing.
The two of them are not on speaking terms at the time of this writing.
The beginnings of Liz’s continuous use of “colorful language” occurred around this period as well. She’s a passionate gardener, a fantastic cook, and she doesn’t throw like a girl: she’s an all-around cool person.
|Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas||Enhanced System: $10,000-$20,000+|
- The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
- New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
- For more information, contact your local or state sanitation agency.
Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes
- It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
- Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
- The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
- New grass and other plantings can cost anywhere from $100 to $1,000 or more.
- Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
- To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
|Posted by:Fredbill in Ashland, VA.||Posted:October 28th, 2020 10:10AM|
When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?
|Posted by:Fiorella in Miami, FL.||Posted:July 28th, 2020 05:07PM|
Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?
|Posted by:Dorie Dew in Nederland, CO.||Posted:May 22nd, 2020 02:05PM|
|Type:leach field install|
I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!
|Posted by:in Stone Mountain/atlanta, GA.||Posted:September 9th, 2019 04:09PM|
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com
|Posted by:in Stone Mountain/atlanta, GA.||Posted:September 9th, 2019 04:09PM|
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.
|Posted by:Gregory Chappel in Trinidad, CA.||Posted:August 15th, 2019 01:08PM|
|Type:New tank and drain field|
1500 gallon tank, 4″line, 90′ rock trenches took 3 days
|Posted by:Unclebob in McArthur, CA.||Posted:January 26th, 2019 09:01AM|
I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda.
I mix a pound of each and flush it down a toilet every couple of months. My Pumpings have gone from every 6 months to every 3 years, and it is not as bad at 3 years as it used to be at 6 months. Sams club and Costco sell it in bulk cheap.
|Posted by:a user in moreland, GA.||Posted:July 20th, 2018 12:07AM|
That seems like a lot of money for s single drain line
|Posted by:Sfr Development LLC in Boone, NC.||Posted:August 11th, 2017 12:08PM|
|Type:Conventional 2 Foot Chambers|
1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines
|Posted by:rrrr in berlin, NJ.||Posted:July 12th, 2017 02:07PM|
location-south jersey-sandy soil approx cost please? looking for economy and conformity.
|Posted by:Any Help Appreciated in Charleston, SC.||Posted:May 12th, 2017 08:05AM|
Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated
|Posted by:Ken Carbaugh in Leesburg, VA.||Posted:June 20th, 2016 06:06PM|
|Type:conventional to alternative systems|
A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.
Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.
|Posted by:Bob42 in High rolls, NM.||Posted:March 25th, 2016 12:03PM|
|Type:Concrete tank, leachfield|
$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.
|Posted by:Susana in cumming, GA.||Posted:August 24th, 2015 04:08PM|
|Type:treating the leach field|
I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?
|Posted by:payed too much? in Effort, PA.||Posted:August 2nd, 2015 11:08PM|
|Type:dual tank w mound|
Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.
|Posted by:Daytrp in Eldersburg, MD.||Posted:July 17th, 2015 08:07PM|
|Type:Repair – new construction|
Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.
Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.
Some states Have programs to help upgrade your septic tank. Check with your county health department.I bid these jobs and this is my basic start point. Specailty jobs, difficulty of access, heavy rock, all add to the bid price
|Posted by:ABMCCAA in Bakersfield, CA.||Posted:June 26th, 2015 05:06PM|
New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.
|Posted by:andrewbasil in hemet, CA.||Posted:March 23rd, 2015 06:03AM|
|Type:simple leach line replacement|
75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job.
Help me out here what do I do?
|Posted by:ltodd kinsey in cda, ID.||Posted:February 26th, 2015 11:02PM|
If properly maintained a working system should never need pumped
|Posted by:M. IRIARTE in STROUDSBUR, PA.||Posted:February 4th, 2015 05:02AM|
ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK
More Articles on the Subject of the Home and Garden
|Check Out All Costs for Home and Garden||How Much Does a Kitchen Remodeling Cost?||How Much Does a Propane Tank Cost?||How Much Does a Plumber Cost?|
|CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.|