How Much To Install Advanced Treatment Septic Tank?

Advanced treatment systems for residential projects typically cost in the $13,000 – $20,000 range. They can be more if larger than typical or in the case of very difficult site constraints. In very rare cases, a residential system could cost upwards of $50,000.

  • A quick Google search will give you price estimates varying from $13,000 to $26,000 for advanced treatment septic systems. However, they can be more if the system is larger than normal or in the case of very difficult site conditions.

Are septic treatments worth it?

There is little scientific data to suggest that you should add bacteria or enzymes to your septic system. The United States Environmental Protection Agency reported that biological additives do not appear to improve the performance of healthy septic tanks.

What is the most cost effective septic system?

Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

What is an advanced treatment septic system?

Advanced Treatment Units (ATUs), referred here to as an individual residential system, are small biological treatment systems used to treat wastewater to a higher degree than a traditional septic system.

Do septic tanks need additives?

Septic tanks are designed to take care of waste disposal on their own — no additives needed. With regular septic tank pumping and inspections, a septic system should last decades. A septic system is used primarily in rural areas without access to city sewer systems.

Can you use too much septic treatment?

Answer: One dose of Rid-X® per month treats septic tanks up to 1500 gallons. Recommended amounts are based on laboratory tests and results. Over-use of the product will not create any problems for the septic system or plumbing, however it is not necessary.

How long do septic systems last?

The material of the septic tank – plastic or concrete tanks can last for nearly 40 years. While the steel tank lasts for 15-20 years. Other factors like water usage, trees or plants growing in the area, the lifespan of pump filters, sand filter systems, and other internal components, the objects flushed to the system.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

How long does a leach field last?

It’s important to consider the life expectancy of a drain-field, too. Under normal conditions and good care, a leach-field will last for 50 years or more. Concrete septic tanks are sturdy and reliable but not indestructible.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How much is an aerobic system?

Aerobic systems are much more complicated than anaerobic systems and can cost between $10,000 and $20,000 to install.

How long does an aerobic septic system last?

Longevity. On average, a properly installed and well-maintained septic tank can last up to 40 years. Regular septic tank cleaning and inspection will keep your aerobic system functional for many years. Proper septic system installation is key to ensuring that your septic system lasts long.

What is the best thing to put in your septic tank?

Biological Additives. Biological additives, like bacteria and extracellular enzymes, are the only acceptable septic tank treatment for promoting a healthy, natural bacterial ecosystem, maintaining an effective drain field, and protecting the health of the local groundwater.

How do I increase bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

How do I keep my septic tank healthy?

Do’s and Don’ts when maintaining your septic system

  1. Regularly inspect and maintain your septic system.
  2. Pump your septic tank as needed.
  3. Keep your septic tank lids closed and secured.
  4. Be water-wise.
  5. Direct water from land and roof drains away from the drainfield.
  6. Landscape with love.
  7. Keep septic tank lids easily accessible.

How Much Does a Septic System Cost?

Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas Enhanced System: $10,000-$20,000+
For homes that aren’t connected to a municipal sewer plant, a septic is an on-site system that collects, treats and disposes of household wastewater by slowly filtering it through underground soil. Typically there are two main parts, a septic tank and a soil absorption system (also called a drainfield, leachfield or disposal field). These are located underground and connected to the house by sewage pipes.Typical costs:
  • In the event that your tank has to be pumped or a drain becomes clogged, having your lids exposed may result in higher costs. Enzymes and Bacteria for Septic Treatment Septic tank chemistry is critical to the health of your system. As a result, you should be mindful of what you flush down the toilet and down the sink. Toxic and dangerous substances should never be flushed down the toilet or poured down the sink drain! In addition to contaminating ground water by destroying enzymes and bacteria in the system, chemicals including paint, varnish, insecticide, solvent, and caustic drain openers have the potential to harm the system’s enzymes and bacteria. Chemicals and bacteria do not target non-biodegradable materials such as cat box litter, disposable diapers, sanitary napkins, cigarette butts, and coffee grounds, which do not decompose. These inorganic elements, as a result, will reduce the capacity of the tank and must be removed. Every effort must be taken to avoid allowing huge volumes of grease or oils to enter the tank during the cleaning procedure. Septic tank bacteria are capable of breaking down grease, which is one of the toughest organic compounds to break down. Scum will form when grease and oils interact with soap and laundry detergents, and it will be difficult to break down and liquefy. Waste disposals should be avoided if at all feasible since they add more solids to the tank. These huge solids, along with other solid wastes such as cigarette butts, paper towels, and other similar items, should be disposed of in the garbage can. Personal care products that destroy enzymes or germs should be avoided as much as possible. For example, oral care products such as mouthwash are beneficial. The commercial claiming that mouthwash removes bacteria responsible for foul breath is most likely something you’ve heard. In other words, if it kills the nasty germs (bacteria) that cause foul breath, it will also destroy the beneficial enzymes and bacteria that allow your septic tank to function properly as well. Mouthwash made from baking soda and water is effective. There are no enzymes or germs that baking soda can destroy. Chemicals used in the home, such as chlorine bleaches, are no exception. In terms of killing enzymes and bacteria, chlorine is among the most effective agents available. Avoiding these sorts of items and substituting them with other options is recommended. Additives: The Beast BioDrain is the additive that we recommend the most since it has no negative impact on the chemistry of your tank’s chemistry. In addition to dissolving organic buildup, the Beast digests fats, oils, greases, and organic food waste while opening clogged drains. What Causes Saturation of Leach Fields? If your leach field becomes saturated for whatever reason, it is possible that you will lose your job. You will be able to tell because the region where your leach field is located will turn into a marshy marsh filled with septic waste water. Due to the fact that the leach field under the grass has been saturated, septic water has begun to rise to the surface, this is the case. It is possible that this problem will arise for a variety of reasons, the most prevalent of which is that the septic tank is overfilled and that an excessive amount of liquid is being discharged into the field at the same time. There are a variety of reasons why a tank might get overfilled with liquid and, as a result, become saturated in the leach field, and determining the source of the overfill is the first step in resolving the problem of over saturation. One of the most typical causes of a saturated leach field is that the area has received a large quantity of rainfall or snow melt in a short period of time. Assuming this is the case, the simplest remedy to the problem is to simply limit the quantity of water that is being pumped down the system for a couple of weeks while allowing the earth to dry up naturally. This situation necessitates the immediate introduction of bacteria into the system, as well as supplementing the therapy with some form of aeration, if at all feasible. When this is done, the soil’s natural balance of enzymes and bacteria will be restored, and the waste water that is expelled to the field will be cleaned as a result of the process. It is also usual for the tank itself to become too full of water, which results in leach field saturation as well. An example of this would be a crack in the tank lid or a failure of the lid seal. As a result, rainwater, irrigation system water, and other liquids may be allowed to enter the tank, which, when combined with typical water use, may result in the tank becoming overfilled. Having the tank emptied out and balanced is a straightforward remedy. If necessary, this may be completed in a single afternoon. Upon drying up, which will often take a couple of weeks, they can also re balance the leach field. It is only necessary to lessen the quantity of water that is circulated through the system on a regular basis until the leach field is completely dried out once more. It is important to check the tank lids and seals as soon as possible if your tank has been overfilled on a regular basis. Assuming that they have all been securely sealed, the next item to look at is your home’s fixtures. Any leaky faucets or shower heads in your home? Using a lot of water on your toilets? Do you have ancient toilets? The remedy to your tank filling up too quickly may be as simple as addressing these concerns. The need to handle this while using a septic system is critical, since excessive water use might cause your leach field to become saturated. It is critical to the integrity of your leach field that you have a properly functioning distribution box. When dealing with a septic or leach field problem, distribution boxes are often overlooked and ignored. In addition, sludge accumulation inside the leach lines itself can cause drainage to become sluggish and cause back ups in the system. Because once a system reaches this level of decay, only replacement or remediation are realistic options for restoring it. Bacteria, once again, is the key. In the event that your tank is overflowing and your leach field is flooded, there are a handful of things you may do to alleviate your issue. This is a significant issue, but it is not one that is insurmountably difficult to resolve. Packing containers used for distribution When it comes to typical drain field systems, the septic distribution box is a critical component to consider. Effluent (wastewater) is distributed uniformly into the drain field using this device (leach field). Gravity feeding is the most frequent method of delivering waste from the septic tank to the distribution box, which subsequently transports waste to the leach field from the distribution box In order for the effluent to flow out of the tank, it must travel a short distance to the septic distribution box. With its varied forms and sizes, the box manages effluent by channeling it into various drain field lines or trenches as necessary. It is a concrete or plastic structure with a number of apertures that serves as a distribution box. Septic pipes are installed into the apertures, and they are normally sealed with a gasket. Because it will be buried beneath the earth, the distribution box has a cover. Therefore, concrete boxes perform better than other types of boxes since the structure is more durable in this instance. It is also easy to discover and examine a concrete distribution box (a probing rod may be used to locate it). Flow leveling devices that spin around the distribution box apertures can be installed to make certain openings higher or lower than others. This is done in order to guarantee that all of the drain field lines receive the same quantity of effluent , and that one side of the field does not become over saturated. To ensure that the distribution box operates effectively, it must be maintained in excellent condition. The most common cause of drain field failure is an inadequately functioning septic distribution box. Due to the even distribution of wastewater, the drain field and the complete septic system will last for an extended period of time. To transport wastewater into the drain field, an alternative distribution system employs pipes rather than a box. A system of waterproof pipes connects the drain field trenches, which are then connected to the sewer system. Both the parallel system, where the septic distribution box distributes wastewater to every trench at the same time, and the serial system are used for septic distribution systems. The parallel method is more common than the serial system since it allows for more efficient wastewater transport. When using the serial system, wastewater is directed to the first trench, then the second, and so on. Because it overworks the initial trench, this sort of technology has a significant disadvantage right away. It is generally accepted that wastewater will flow into the first trench until it is fully accumulated. This causes the first drain field line to be always full, since it then runs into the second trench. Drain field lines are independent of one another, and if one line performs less well than another, the effluent received by the other line will be reduced as a result. A trench that drains properly, on the other hand, will collect a significant amount of wastewater. An efficient drain field trench is dependent on the soil surrounding it, the amount of sunshine it gets, and other natural elements. An additional trench can be built at the end of a serial system if the landowner has enough space to extend the drain field. Failure of a distribution box is mostly caused by a lack of adequate time management. However, environmental conditions such as flooding and cold temperatures can cause the boxes to lean to one side after they have been put. In addition, because the box has been removed, proper flow into the trenches has been disrupted. Among the most critical components of any septic system is the distribution box. The drain field will be used unevenly if there is an uneven distribution of effluent. Parts of the drain field will fail as a result of overcrowded tunnels in the drain field. The effect of a badly functioning septic distribution box is the accumulation of untreated wastewater on the surface of the soil in the drain field. Thus, pay special attention to that location and make certain that there is nothing unusual there.
Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes
What should be included:
  • It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
  • Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
  • The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
  • New grass and other plantings can cost anywhere from $100 to $1,000 or more.
  • Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
  • To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
CostHelper News
What People Are Paying – Recent Comments
Page 2 of 2-Previous12
Posted by:Fredbill in Ashland, VA. Posted:October 28th, 2020 10:10AM
Type:PVC pipe
When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?
Posted by:Fiorella in Miami, FL. Posted:July 28th, 2020 05:07PM
Type:Conventional septic
Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?
Posted by:Dorie Dew in Nederland, CO. Posted:May 22nd, 2020 02:05PM
Type:leach field install
I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!
Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com
Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.
Posted by:Gregory Chappel in Trinidad, CA. Posted:August 15th, 2019 01:08PM
Type:New tank and drain field
1500 gallon tank, 4″line, 90′ rock trenches took 3 days
Posted by:Unclebob in McArthur, CA. Posted:January 26th, 2019 09:01AM
Type:Trailer park
I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda. I mix a pound of each and flush it down a toilet every couple of months. My Pumpings have gone from every 6 months to every 3 years, and it is not as bad at 3 years as it used to be at 6 months. Sams club and Costco sell it in bulk cheap.
Posted by:a user in moreland, GA. Posted:July 20th, 2018 12:07AM
That seems like a lot of money for s single drain line
Posted by:Sfr Development LLC in Boone, NC. Posted:August 11th, 2017 12:08PM
Type:Conventional 2 Foot Chambers
1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines
Posted by:rrrr in berlin, NJ. Posted:July 12th, 2017 02:07PM
Type:septic
location-south jersey-sandy soil approx cost please? looking for economy and conformity.
Posted by:Any Help Appreciated in Charleston, SC. Posted:May 12th, 2017 08:05AM
Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated
Posted by:Ken Carbaugh in Leesburg, VA. Posted:June 20th, 2016 06:06PM
Type:conventional to alternative systems
A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily. Some above grade sand or drip systems will cost as much as $45,000 in areas with expectional poor soils. Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.
Posted by:Bob42 in High rolls, NM. Posted:March 25th, 2016 12:03PM
Type:Concrete tank, leachfield
$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.
Posted by:Susana in cumming, GA. Posted:August 24th, 2015 04:08PM
Type:treating the leach field
I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?
Posted by:payed too much? in Effort, PA. Posted:August 2nd, 2015 11:08PM
Type:dual tank w mound
Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.
Posted by:Daytrp in Eldersburg, MD. Posted:July 17th, 2015 08:07PM
Type:Repair – new construction
Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size. Bigger means more. Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000. Advanced treatment unit add $10k- $13k to price of permit and trenches. Some states Have programs to help upgrade your septic tank. Check with your county health department.I bid these jobs and this is my basic start point. Specailty jobs, difficulty of access, heavy rock, all add to the bid price
Posted by:ABMCCAA in Bakersfield, CA. Posted:June 26th, 2015 05:06PM
New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.
Posted by:andrewbasil in hemet, CA. Posted:March 23rd, 2015 06:03AM
Type:simple leach line replacement
75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job. And even though these men work for a major plumbing company they insisted on cash only.Is this right? Help me out here what do I do? This was 3 days ago.
Posted by:ltodd kinsey in cda, ID. Posted:February 26th, 2015 11:02PM
Type:all
If properly maintained a working system should never need pumped
Posted by:M. IRIARTE in STROUDSBUR, PA. Posted:February 4th, 2015 05:02AM
Type:SEPTIC
ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK
Page 2 of 2-Previous12
External Resources:
  1. Twri.tamu.edu/reports/1999/l5234.pdf
  2. sohioline.osu.edu/aex-fact/0744.html

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does a Kitchen Remodeling Cost? How Much Does a Propane Tank Cost? How Much Does a Plumber Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,451, with an average cost of $6,804 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,804
Typical Range $3,157 – $10,451
Low End – High End $450 – $21,000

The cost information in this report is based on real project costs provided by 948 HomeAdvisor users.

New Septic System Cost

It is based on 948 HomeAdvisor members’ real project expenses that were submitted to us.

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

It typically costs between $3,000 and $8,000 to build a traditional anaerobic system. When compared to the more sophisticated aerobic system, anaerobic systems are often far less expensive to establish. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the additional burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other things.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project.

You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

It costs anywhere from $3,000 to $15,000 to build a leach or drain field as part of your septic system. It costs between $2,000 and $10,000 to install a typical drainage system. Septic systems include several sections, one of which is the drain or leach field, which sends wastewater back to the ground. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainage system. It is possible that you may require cleanup for blocked or flooded fields, which would increase the cost of the project by $10,000 to $50,000.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.

After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets.

One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

Average costs for fiberglass septic tanks range from $1,200 to $2,000, excluding installation costs. It does not shatter or corrode readily, but it is prone to harm during installation, much as plastic is during transport and storage. As a result of its lighter weight and greater vulnerability to structural damage, the tanks themselves can move in the soil underneath them.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.

In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Repairing a septic system might cost anywhere between $600 and $3,000. For each sort of repair or item described below, tank repairs typically cost less than $1,500. From $2,000 to $20,000, leach fields can be purchased.
Still Have Questions About Septic Tanks?

Because aerobic septic systems are rather complex systems, the average cost of an aerobic septic system is between $10,000 and $20,000. The less complex anaerobic septic system has an average cost of between $2,000 and $5,000 on a per-unit basis.

In This Article

  1. Exemples of Septic System Prices Paid
  2. Aerobic Septic System Costs
  3. Anaerobic Septic System Costs
  4. Labor Costs
  5. Aerobic Septic System Pros
  6. Anaerobic Septic System Cons
  7. Choosing a Septic System
  8. Choosing a Contractor
  9. Free Septic System Quotes, and more.

The following are some examples of septic system installation costs, broken down by location:

City or State Zip Code Average Price Paid
Boston, MA 02108 $7,787
New York City 10001 $6,275
Philadelphia, PA 19019 $11,878
Massachusetts Statewide $6,487
North Carolina Statewide $3,511
New Hampshire Statewide $9,325

*According to HomeAdvisor.com users

Aerobic Septic System Costs

aerobic septic systems require aerobic bacteria (bacteria that prefer oxygen) as well as an air pump to properly oxygenate the septic tank and aid in waste breakdown and decomposition. The cost of an aerobic system varies based on the size of the system, the soil conditions, and your location; nonetheless, aerobic systems are more intricate than their anaerobic counterparts and thus cost more.

  • Site assessments and permissions typically cost between $200 and $400
  • However, there are exceptions. An aerobic septic system typically costs between $10,000 and $20,000
  • However, some systems can be as little as $5,000. Every one to three years, you should have the system properly examined and pumped, which will cost you an average of $200. It is possible that aerobic systems will require motortimer replacements from time to time. Motor replacements cost on average between $500 and $600, while timers cost on average $100.

Anaerobic Septic System Costs

When it comes to waste breakdown, anaerobic septic systems rely on the presence of anaerobic bacteria (bacteria that abhor oxygen). The cost of these systems varies depending on their size, where you live, and the soil conditions.

  • In order to break down waste material, anaerobic bacteria (bacteria that dislikes oxygen) must be present in the system. Depending on the size of the system, your geographic location, and soil conditions, costs might vary significantly.

Labor Costs to Install a Septic System

In many cases, the installation expenses for septic systems are as costly as, if not larger than, the cost of the system itself.

  • The cost of installing a septic system is between $1,500 and $4,000 on average.

Although you may be tempted to install the system yourself in order to save money, working with a professional is the most effective approach to ensure that the task is done correctly the first time. Tanks that are not correctly installed might leak and pollute the water supply, resulting in considerable harm and expensive repairs to the environment. Keep in mind that while looking for an installer, price should not be the only factor to take into consideration. Although the lowest bidder’s price may be appealing, that does not always imply that he or she is the most qualified candidate for the job.

It is a good idea to question others about their experiences working with an installation in order to get a sense of the type of work they will accomplish for you in the future.

Pros and Cons of Aerobic Septic Systems

Three different tanks are used in aerobic systems. Aerators circulate bubbles of oxygen through the waste when it enters the first tank and settles into layers. Waste then flows into the second tank (the treatment tank), where it is further treated. This is the point at which the aerobic bacterium eats the organic components. After that, it is transferred to a pump tank for final treatment. There are advantages and disadvantages to using aerobic septic systems.

Aerobic Septic System Pros

  • Designs: Aerobic septic systems are available in a variety of configurations to provide for the most optimal installation for your home. Pollution reduction: Aerobic systems, when compared to anaerobic systems, create less groundwater contamination since they require several treatments. Aerobic septic systems take up very little area and are thus very cost-effective. There are also instances in which they are the only viable alternative due to a lack of accessible space.

Aerobic Septic System Cons

  • Cost:Aerobic systems are significantly more expensive than anaerobic septic systems, typically costing two to three times as much. Over time, aerobic septic tanks will require more care than traditional septic tanks do. When the system is ignored, the quality of the therapy suffers. Failure to properly maintain a system may potentially result in the failure of the entire unit. Weather conditions: If the temperature in an aerobic septic system drops too low, the quality of the treatment suffers as a result.

Pros and Cons of Anaerobic Septic Systems

Anaerobic septic systems are less complex than their aerobic counterparts, consisting of a septic tank and two main pipes, one of which is connected to the home and the other which is connected to the yard. From the main pipe, a number of smaller pipes branch off, each of which sits just below the surface of the lawn. Anaerobic microorganisms consume the waste that has accumulated in the tank. Water waste rises to the surface, flows through smaller pipelines beneath the earth’s surface, and ultimately filters out into the surrounding soil (Figure 1).

Anaerobic Septic System Pros

  • Availability: Anaerobic systems are more frequent than aerobic systems, and they are generally more easily available than aerobic systems. Cost: These systems are far less expensive than aerobic systems, which is partially owing to the fact that they are considerably simpler. Anaerobic septic systems are environmentally beneficial since they do not require the use of chemicals or electricity to treat the water.

Anaerobic Septic System Cons

  • Pumping: Because anaerobic systems have fewer tanks, they frequently require more pumping than aerobic systems. When it comes to resale value, many prospective home buyers have never lived in homes that have been equipped with a septic tank, which might make it harder to sell your property. Solid waste: Anaerobic septic tanks, which have only one tank and a pipe system, are more sensitive to solid waste than aerobic septic tanks.

Choosing a Septic System

In many cases, because anaerobic systems have fewer tanks, they have to use more pumping. If you are trying to sell your property, you may have difficulties since many purchasers have never lived in a home that has been equipped with a septic tank. Waste solids: Anaerobic septic tanks, which consist of only one tank and a pipe system, are particularly sensitive to solid waste.

  • What is the size of my budget? • If you have a tight budget, it’s usually best to go with a standard anaerobic system. • What is the size of my property? – An aerobic system may be required for extremely tiny lots, which will need you to spend the extra money. What is the significance of environmental impact? For those who are concerned about the environment, an aerobic system may be worth the additional expense because the effluent it generates is far cleaner. If protecting the environment is not a top priority for you, an anaerobic system may be the best option for you. What are the applicable legislation in the area? • Does your city or municipality have any restrictions on the installation of aerobic systems in residential properties? If this is the case, the decision has already been made for you. Is it possible for me to adhere to a maintenance schedule? – Aerobic systems may be more efficient and longer-lasting than conventional systems, but those advantages might be lost if you do not adhere to a regular maintenance plan. Aerobic systems demand more care than anaerobic systems, so if you’re the sort of person who forgets to get an oil change or arrange a dental visit on time, think again.

Choosing a Contractor

Do you know what my financial situation is like? – If you’re working with a tight budget, you’re definitely better off sticking with a typical anaerobic system. What is the square footage of my property. – The cost of an aerobic system may be too expensive for extremely small lots; nonetheless, What is the significance of the environmental consequences? – If you are someone who is concerned about the environment, an aerobic system may be worth the additional expense because the effluent it generates is far cleaner.

Where can I find out more about the local legislation?

As a result, you no longer have an option; Does my ability to follow a maintenance program impress you?

Anaerobic systems take less maintenance than aerobic systems, so if you’re the sort of person who forgets to get an oil change or arrange a dental visit on time, think again.

  • Inquire about recommendations. If you have a septic system, there is a good possibility that your neighbors have as well. Discover who they utilized and whether or not they were satisfied with the service. Alternatively, you might contact your local wastewater management authority or a comparable organization. Request estimates from various contractors to evaluate pricing, but don’t make your final decision based only on price. Remove any quotations that appear suspiciously high – or low – in any direction. Check to see that any firm you engage is licensed, bonded, and insured before you hire them. Insist on seeing proof. A firm that is bonded but does not complete the task may be able to file a claim against the bond to recover the money you’ve spent, or you may be able to have someone else do the job at no further cost. Insurance is essential because, if you do not have it, you may be held financially accountable for incidents that happen on your property.

Inquire about previous clients’ opinions. Having a septic system increases the likelihood of your neighbors having one as well. Find out who they employed and whether or not they were satisfied with the service they received. Alternatively, you can contact your local wastewater management agency or a comparable organization. In order to evaluate pricing, obtain estimates from a number of contractors; nevertheless, do not make your final decision based just on price. Remove any quotations that appear suspiciously high – or low – in any direction, and Check to see that any firm you choose is properly licensed, bonded, and insured before hiring them.

The bond can be used to reclaim the money you’ve spent if a firm is bonded but does not complete the project.

Insuring your property is critical because you might be held financially accountable for incidents that occur on your property if you do not have insurance.

  • Septic 101: Aerobic vs anaerobic bacteria
  • Septic Systems: What Are the Differences Between Aerobic and Anaerobic Systems? Exactly how often should I pump out my septic tank is up to you. It is your responsibility to maintain your septic system.

Find Local Septic Pros Who Will Compete for Your Business

The Difference Between Aerobic and Anaerobic Septic Systems. A comparison of the differences between aerobic and anaerobic septic systems. If I have a septic tank, how often should I pump it out? It is your responsibility to maintain your septic system;

  • There is insufficient energy for the therapy. Filtering medium made entirely of renewable resources
  • Pollutants are removed in 99 percent of cases. a remedy that is permanent on site
  • The ability to access the filter at any moment
  • Installations that are simple and trouble-free
  • Built-in pump vault (which avoids the need for a pump tank)
  • There is the option of a gravity or a pumped discharge
  • The PACK unit is equipped with a 1,000-gallon septic tank that is permanently connected to the unit. The material might be polyethylene or concrete. Additionally, a nitrogen removal device is offered.

a lack of available energy for the therapy Filtering medium that is entirely renewable; Removal of contaminants to a 99 percent efficiency Solution that is installed permanently on-site. Any time, anywhere access to the filter Installations are straightforward and trouble-free. Pump vault integrated into the design (this avoids the need for a separate pump tank). There is the option of a gravity or a pumped discharge The PACK unit is equipped with a 1,000-gallon septic tank that is permanently connected to the vehicle.

Additionally, a nitrogen removal device is offered;

973-823-0100

What is the purpose of drip dispersal? A land application technology for dispersing wastewater effluent in decentralized areas, drip dispersion is also known as drip irrigation. Using drip technology, time-dosed, low-volume, evenly distributed dosages are applied over the full absorption region, while at the same time final treatment and recycling back into the environment are accomplished. When used properly, drip creates the ideal circumstances for groundwater recharge into the receiving environment.

  1. Drip systems are visually beautiful and are situated below the surface of the ground, following the principle of “out of sight, out of mind.” Drip fields are ideal for passive relaxation due to the fact that they receive natural watering all year.
  2. Drip is great for shallow installations since it increases the distance between the drip and any site constraints (i.e.
  3. Drip Dispersal is used in both warm and cold areas, and it is effective 365 days a year.
  4. Using drip for your wastewater dispersal requirements is a dependable, proven, and long-lasting solution.
  5. Increased bacteria populations speed up the breakdown process of residential wastewater, allowing it to be released into the waste disposal area more quickly and safely.

It can be placed as simply as a septic tank, and it may be built just behind a septic tank, allowing contractors to schedule multiple projects in a single day. The AX-RT unit is comprised of the following functional elements that are essential to the treatment process:

  1. A textile media bed for further treatment
  2. A recirculation/blending chamber
  3. A gravity or pump discharge system for ultimate dispersal
  4. An optional Orenco UV unit for disinfection as necessary.

a textile media bed for advanced treatment; a recirculation/blending chamber; a gravity or pump discharge system for ultimate dispersal; an optional Orenco UV unit for disinfection as necessary

  • NSF/ANSI Standards 40 and 245 are met, and the product is certified. It is possible to utilize it in a polyethylene, fiberglass, or concrete tank. In a completely submerged reactor, waste water is treated silently, effectively and without the presence of any stench. BOD5 and TSS concentrations of 9 mg/L and 8 mg/L, respectively, are typical of the effluent quality. There are no inner tank filters, screens, or diffusers to maintain or replace. Air supply system with a patented non-clogging design
  • Air compressor with a remote mounting bracket
  • Low initial capital and operating costs
  • Low initial capital and operating costs
  • Complete system designs completed on-site
  • Designing, specifying, and installing ECOPOD-N treatment systems is simple since they are pre-engineered and do not require specialized knowledge. There is no mixed liquor in a true connected growing system. There is no need for an external clarifier with an integrated clarifier.

It is a compact non-aggregate leachfield system with outstanding performance! The Eljen GSF Geotextile Sand Filter

  • It pre-treats effluent with a two-stage biomat
  • It has a greater long-term leaching capacity
  • And it is more energy efficient. Installations on a wall or in the ground
  • Flat or sloping terrain
  • Layouts for trenches or beds
  • Installation requires a significantly smaller space
  • Reduced environmental impact due to the absence of stone. A reduction in off-site fill
  • Lightweight recycled materials
  • Thousands of installations
  • Patent-protected product technology Approved in the states of New York and New Jersey

The Perc-Rite® Drip Dispersal system from American Onsite is appropriate for any size system, including single family homes, schools, churches, communities, and commercial locations, among other things. Installed below ground level, the Perc-Rite® drip dispersal system is both functional and visually beautiful, since there is no visible indication of tubing in the ground. Water dispersal systems from Perc-Rite® are particularly well suited for shallow installations, steep slopes, and forested areas.

  1. Currently, the Puraflo peat fiber biofilter system is the most adaptable and dependable treatment system available on the market.
  2. Puraflo is non-odoreous, and its operation is straightforward.
  3. For a demonstration, please see the image below.
  4. This is accomplished by utilizing simple yet effective natural processes.
  5. Why should you choose Puraflo?
  • The modular construction ensures that phasing possibilities are versatile. Completely devoid of odor
  • Power needs are extremely low or non-existent. Compatible with seasonal or occasional usage
  • Designed and built at a factory
  • Models of the P150N are approved to NSF/ANSI Standard 40. Removal of pathogens and nitrogen at a high level
  • A viable alternative to NPDES discharge systems
  • Passive biofiltration principles are used to provide a green solution. Peat fiber has a high cation exchange capacity and a high lignin concentration, which results in a prolonged media life. System maintenance is kept to a bare minimum, with no yearly fluffing or raking of the peat fiber media required.

This unit cleanses wastewater in an environmentally friendly manner while also acting as a barrier that traps contaminants owing to the use of 100 percent organic filtering medium that is manufactured from a renewable resource – coconut husks. Alternatively, the Ecoflo unit may be purchased as a stand-alone treatment unit or as an all-in-one compact solution with a septic tank built in. Why should you choose Presby?

  • When compared to conventional systems and mechanical devices, it is more cost-effective. There is no need for power or mechanical components. Other than pumping the septic tank, there is no need for upkeep. It is necessary to have a smaller treatment field
  • It blends well with the sloping landscape. Adapts to site limits that are difficult to overcome
  • Installs more quickly and readily than conventional systems
  • Is less expensive. There is no longer any need for pricey cleansed stone. It is easily adaptable to both home and business settings. To optimize bacterial activity, it makes use of a shielded reception surface. System performance and lifespan that is unsurpassed
  • Groundwater is recharged in a safer manner than with conventional methods. Contains a significant amount of post-consumer recycled plastic

Tri-State PumpSeptic Supply, LLC is a company that provides septic pumping services in the tri-state area.

Leave a Comment

Your email address will not be published. Required fields are marked *