How Much Is Well And Septic Tank Permit Cost?

Effective July 1, 2019

Application Type	Fee
Private well only, with or without OSE/PE documentation	$300
New Fee Effective 7/1/19: Repair permit for a treatment works, 1,000 gpd without OSE/PE documentation	$425
New Fee Effective 7/1/19: Repair permit for a treatment works, 1,000 gpd with OSE/PE documentation	$225

14 •

How do I get a permit to install a septic system?

• The permit is issued by your local building department. You can apply for it, or the contractor hired to build the system can obtain it and include the cost when billing you. Remember that the cost of the permit includes a review of the septic system design drawing and at least two inspections of the system as it is being installed.

Can I install my own septic system in Michigan?

Homeowners are allowed to install their own septic system. All others must be licensed by District Health Department #10. Twenty-four hours prior to cover/back filling a septic system the owner/contractor must contact the local sanitarian to complete a final inspection.

Can I install my own septic system in NC?

QUESTION: Is a homeowner allowed to install his or her own system? ANSWER: A homeowner may install the system for a property that will used as his or her primary residence as long as the system is gravity fed, pipe and gravel system and is limited to two systems within a five year period.

How much does it cost to put in a well and septic in Michigan?

$3,750 – $15,300 (Average Cost) The average cost to put in a new water well is $3,750 to $15,300 while installing a well and septic system costs $6,000 to $20,000. Well drilling costs $25 to $65 per foot for a complete installation, or $15 to $25 per foot just to drill.

How much is a septic system in Michigan?

The average septic system cost ranges between $10,000 – $25,000. This includes everything from the average price of the tank (which is often thousands of gallons) to the cost of labor to install it.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How close can a septic tank be to a house?

Septic tanks are required to be at least 5 feet from the house, although most are between 10 and 25 feet away.

Do I need a certificate for my septic tank?

The General Binding Rules were designed to simplify the regulation of small sewage discharges. Septic tanks and small sewage treatment plants no longer need to be registered and there is no legal requirement to keep records of maintenance (although this is advisable).

How long does a septic permit last in NC?

Well and septic permits are typically valid for five years from the date of issuance. If you would like to know the expiration date of a specific permit, please contact your local health department.

How long is a septic permit good for NC?

How long is a perc test valid? If a septic permit has been issued, the permit is good for 5 years.

What state is Alamance County in?

The Ontario Water Resources Act specifies that any person that engages in the business of well construction must have a valid well contractor licence unless exempt under the Wells Regulation. A well contractor licence permits the licence holder to operate a well construction business.

How much does it cost to put in a well and septic system in Texas?

Installation of a septic system costs between $2,800 and $8,000 with an average of $5,000. Between $5,000 and $22,500 is the range for total expenses for well and septic system drilling and installation.

Do I need a permit to drill a water well in Texas?

What Is The Rule of Capture? Groundwater in Texas is governed by the legal doctrine known as the Rule of Capture. Under the Rule of Capture, a landowner needs no permit to drill a well and pump groundwater, and he may pump as much water as he may beneficially use even if that causes his neighbor’s well to go dry.

Well and Septic Fees

There are a lot of aspects that influence how much you pay in fees. There are different fees connected with different types of sewage disposal systems. A non-standard septic system has a substantially higher charge than a simple septic system repair since the work is more complicated. Variables that may be relevant include:

• Is it necessary to do a site evaluation
• Is it necessary to conduct a percolation test
• Is it necessary to conduct a groundwater investigation? Is it necessary to do a plan check? Is it important to have water well pump testing performed? Is it necessary to do a drainage review?

Other services, such as a vesting certificate, may be requested by you. There are additional expenses connected with these additional services. Since these decisions are complicated, it is not advisable to make assumptions until the entire scope of a project has been determined by Permit Sonoma personnel at the time an application is approved for review. Prior to the acceptance of your application, please do not fill in any amounts on checks. Because I am looking at these charge schedules, I hereby certify that I have read and fully understood the foregoing warning remarks.

Contact Information

Address2550 Ventura AvenueSanta Rosa, CA 9540338.465074, -122.72370538.465074, -122.723705

WellSeptic Maps

Map of Non-Standard Septic System OPR Inspection Locations in Sonoma CountyWellSeptic’s non-standard septic system OPR inspection areas in Sonoma County.

The Average Cost for a Well & Septic System

Indoor plumbing was one of the most significant inventions in the history of the human species. The availability of running water in all dwellings is a legal requirement in the United States of America. Homes that are not in good condition run the danger of being declared uninhabitable. This implies that every home need access to both water and sewage services. To obtain it, you must either have water provided by a well and removed by a septic system, or you must have water delivered and removed by your municipality’s water and sewer systems.

Wells and Septic Systems

In other circumstances, homeowners must choose between using city water and sewer or drilling their own well and installing a septic system on their property. You should be aware of the following issues before beginning the process of digging a well in your property. In spite of the fact that you won’t have to pay for water and sewer any more, you will incur fees related to the digging and installation of your well as well as the care of your septic system. The costs associated with digging and installing your well should be considered before you begin digging.

You’ll also need to make sure that you have enough room on your property to accommodate a well or septic system installation.

Septic Tank Cost

The tank/absorption system is the most often seen form of septic system. Waste evacuation is accomplished by the use of gravity and the surrounding soil in this type of system. Once the waste has reached your septic tank, it begins to split into three distinct components: sludge, scum, and water. The septic tank discharges clean water through a conduit. The size of the tank system that you will require is totally dependant on the size of your home and household. Depending on the size of the system, septic tank installation might be challenging.

All of these tanks must transfer biodegradable trash in order for it to decompose.

If you have any doubts about your ability to execute such a project, hiring a professional installation company is your best option.

As a result, the national average cost might be significantly higher or lower than the local average cost.

Generally speaking, a three-bedroom house is the standard configuration in the United States. The cost of a new septic tank installation might range anywhere from $1,500 to $4,000 or more under ideal conditions, which include good soil, a flat location, and suitable weather conditions.

Cost of a Combined System

It’s important to consider the separate components of the project when estimating the cost of a well and septic system installation. The septic tank itself is the most conspicuous of these components. Tanks of this type are commonly constructed of concrete, however they can also be constructed of polyethylene, steel, or fiberglass. A reasonable-sized tank for a typical family house should be able to hold 1,000 gallons of water at a time. Depending on the model, the tank might cost anywhere from $600 to $1,000.

Gravel trenches are the most frequent type of drain, and they are constructed of gravel.

Those ditches include about 10 to 12 inches of gravel that has been put as deep as 36 inches into the earth.

Gravel itself is rather inexpensive, ranging between $12 and $30 per ton.

Lifespan of a Well

The cost of drilling a well varies greatly from one location to another. As with any other element, the lifetime of the well is dependent on a variety of factors. These include geographic location as well as groundwater and water table conditions as well as seasonal fluctuations and the type of well you are contemplating. A specialist can assess these considerations and assist you in making your selection. Additionally, they may advise you on the expense of digging a well in your particular situation, which you should take into consideration before proceeding.

Well and Septic Installation Process

Ordinarily, the very first step in having your well and septic system completed is to seek a permission from your local government. It is possible that you may need to obtain consent from a homeowners association, neighbors who might be affected, or other agencies. Simply obtaining your visa might cost hundreds or thousands of dollars, depending on where you reside in the world. Following that, you’ll need to have your soil analyzed to determine its drainage capacity. You may anticipate to spend somewhere between $100 and $400 on this portion of your project.

After you’ve gained a thorough grasp of your soil, you’ll be able to determine the best location for your well and septic system.

No legal reason prevents you from doing so if you’re confident in your ability to do it yourself.

It is recommended that you hire a contractor to manage these plans unless you are completely confident in your ability to complete them. The incorrect installation of your system can result in you having to cope with far more expensive repair on your home.

Digging the System

Once you have completed the excavation and septic system installation, you will be finished. In the event that you decide to do it yourself, the costs will be for equipment and tool rental, which might vary greatly, making it hard to provide an accurate estimate. An experienced expert to design and install your system might cost anywhere between $1,500 and $4,000 on average. There are some septic system installers that will take care of all of the permits and installation for you, which is a nice convenience.

Whenever you’re on the lookout for specialists, inquire about to see if any of these types of installers are available in your neighborhood.

DIY Septic Tank Installation

If you decide to install your own septic system, you should be aware that you will want specialized equipment to do the job properly. For this reason, and because a septic tank’s capacity is on average 1,000 gallons, purchasing or renting a backhoe as a first step is the most efficient method of installation. In addition, you’ll want specialized plumbing, fittings, sealant, and the system itself. It is necessary to dig a hole for your septic tank once all of your equipment, permits, and site selection have been finalized.

1. As soon as you have all of your measurements, you should be able to start digging your hole to the proper depth.
2. Next, you’ll need to put in your gravel trenches and drainage pipes.
3. Take cautious not to cause any cracking or other damage to your tank’s outside.
4. Then cover your unit with earth and plant a garden around it once that has been confirmed.
5. This is a pretty typical occurrence and does not necessarily indicate that something is amiss.

Apply for a New Well/Septic – District Health Department 10

Individuals who wish to install private wells or septic systems must obtain permission from the District Health Department10. DHD 10 will conduct an evaluation of the site, design the septic system, select the location for the well installation, and verify the completed work. Individuals are permitted to build their own septic systems in their homes. District Health Department10 must provide a license to all other businesses. The owner or contractor must call the local sanitarian at least twenty-four hours before covering or back filling a septic system in order to do a final inspection.

The sanitarian may give the owner/contractor permission to file a “Contractor Affidavit” and then cover the system, if the sanitarian is unable to make it to the site within 24 hours. It is recommended that you pump your septic tank every 3 to 4 years by the District Health Department10.

Quick Links

Code de la Santé MI DEQ stands for the Michigan Department of Environmental Quality.

Forms

Fee Schedule for Well and Septic Permit Applications in 2022

Commercial

Septic systems that produce less than 1000 gallon per day (gpd) may be subject to inspection under the District Health Department10’s local sanitary code requirements. Using the Michigan Criteria for Subsurface Sewage Disposal, all commercial septic systems with a capacity larger than 1000 gpd but less than 10,000 gpd are subject to inspection. The vast majority of commercial wells fall into one of two categories: Type II public water supplies or Type III public water supplies. Send us an email at [email protected].

Quicklinks

MI DEQ stands for the Michigan Department of Environmental Quality. Water Supply that is not part of a community

Forms

Fee Schedule for the Year 2022 Application of a Well and Septic System Sewage Removal and Disposal Contracting Company RegistrationApplicationContractor Affidavit FormCommercial Septic AddendumContracting Company RegistrationApplication

Septic System Permitting

The cost of a new septic system permit is $425. A detailed site evaluation and soil analysis to determine placement and sizing of the system, system construction specifications, and installation and final connection inspections to ensure the septic system meets all applicable State Codes and required setbacks are all included in this fee. If you have any questions, please contact us. The application for a system permit must be submitted by the property owner or the owner’s authorized representative (someone whom the property owner has designated in writing).

• A completed and signed “Zoning and Flood Plain Notification” form
• A detailed site plan showing all features of the property being developed, including all structures on the property, drainage features, proposed well and septic system locations, and distances to property lines, easements, and surface water bodies (if applicable)
• And a signed “Zoning and Flood Plain Notification” form. document demonstrating property ownership, such as a property tax identification number or a contract for the conveyance or sale of the property. A drawing of the interior floor plan of the dwelling or building to be erected or put on the site, indicating the number of bedrooms, external measurements of the structure, and total heated and cooled square footage of the structure

Repairs to Existing Systems

Before a septic system can be fixed, a repair permit must be obtained from the local building department. The charge for this permit is $300. A detailed site evaluation and soil analysis to determine the placement and sizing of the replacement drainfield, system construction specifications, and installation and final connection inspections to ensure the septic system complies with all applicable State Codes and setback requirements are included in this fee. Before a septic system can be fixed, a repair permit must be obtained from the local building department.

A detailed site evaluation and soil analysis to determine the placement and sizing of the replacement drainfield, system construction specifications, and installation and final connection inspections to ensure the septic system complies with all applicable State Codes and setback requirements are included in this fee.

• • a “pumpout certification letter” from a professional septic tank pumper stating the size and structural condition of the septic tank or tanks
• • a full site plan illustrating all existing features on the land, including all structures on the property, drainage features and existing well and septic system placements, as well as distances between property lines, easements, and surface water bodies, if applicable. document demonstrating property ownership, such as a property tax identification number or a contract for the conveyance or sale of the property. A drawing of the interior floor plan of the dwelling or building that the failed septic system serves, indicating the number of bedrooms, external measurements of the structure, and total heated and cooled square footage of the structure

Modification of Existing Systems

A septic system that is already in place may be unable to handle the increased amount of wastewater produced as a result of certain types of building additions, such as adding a bedroom to an existing house or purchasing a larger mobile home, as well as the addition of office space or changes in business practices. It is necessary to modify the septic system, and a permit for the alteration must be obtained. The charge for this permit is $320. A detailed site evaluation and soil analysis to determine the location and size of the increased drainfield and new septic tank (if applicable), system construction specifications, and installation and final connection inspections to ensure the septic system complies with all applicable state codes and required setbacks are all included in this fee, as well as a permit application fee.

The application for a system permit must be submitted by the property owner or the owner’s authorized representative (someone whom the property owner has designated in writing). The following documents are necessary in order to submit an application for the permit:

• • a “pumpout certification letter” from a professional septic tank pumper stating the size and structural condition of the septic tank or tanks
• The creation of a detailed site plan that depicts all existing features of the property, including all structures on the property, drainage features, the location of existing wells and septic systems as well as the distances between property lines, easements, and surface water bodies (if applicable)
• Document demonstrating property ownership, such as a property tax identification number or a contract for the conveyance or sale of the property. • an interior floor plan of the residence or building that the existing septic system serves, with details such as the number of bedrooms, exterior dimensions of the structure, and total heated and cooled square footage of the structure
• A diagram of the addition that is to be constructed onto the existing building (if applicable)

A “pumpout certification letter” from a qualified septic tank pumper indicating the size and structural condition of the septic tank(s); and the creation of a complete site plan that depicts all existing characteristics of the land, including all structures on the property, drainage features, the placement of existing wells and septic systems as well as the distances between property lines, easements, and surface water bodies (if any); document demonstrating property ownership, such as a property tax identification number or a contract for the conveyance or sale of the property; and • an interior floor plan of the residence or building that the existing septic system serves, with details such as the number of bedrooms, exterior dimensions of the structure, and total heated and cooled square footage of the structure; a diagram of the addition that is to be built onto the existing building (if applicable);

Septic System Construction Permit

If an individual or a property owner want to have a subsurface sewage disposal (septic) system constructed on their land or if they need to repair an existing malfunctioning system, they must get a Septic System Construction Permit from the City of San Diego. Septic System Assistance Division County Map (Division Septic System Assistance County Map)

What Information Must I Provide?

Applicant’s information can be submitted using the web portal*, and it includes the following:

• Identify the landowner’s name and address, as well as the location or site’s size and number of occupants (including number of bedrooms), water consumption amounts, whether there is an excavated basement, whether there are basement plumbing fixtures, whether the house and lot have been staked, and the name of the installer (if any). Drawing showing the property boundaries, home site position, well location, spring location, planned roadway and utilities, and driving instructions to the site are included in this document. For large conventional or alternative systems, soil maps are created by a soil scientist (if necessary), and system design is completed by a licensed engineer.

*Please keep in mind that the Division suggests that you apply online in order to expedite the application processing. Paper applications, on the other hand, will continue to be accepted at the relevant Environmental Field Office. (CN-0971, Form CN-0971)

Helpful Lists:

• The Division of Water Resources is a division of the Department of Water Resources. CONSULTANTS APPROVED BY THE DEPARTMENT OF AGRICULTURE
• INACTIVE INSTALLERS- This list, grouped by county, covers those persons who have valid permits to construct, install, modify, or repair a septic system. It should be noted that installation permits are valid across the state, not only in the counties indicated. A separate permission may be required in contract counties such as Blount and Davidson counties as well as Hamilton and Jefferson counties as well as Knox and Madison counties as well as Shelby and Williamson counties. Individuals possessing valid licenses to remove (pump) household septage from septic tanks, holding tanks, portable toilets, or other similar sewage treatment or disposal facilities are listed on this page as “Active Pumpers.”

How Will My Application Be Processed?

Applicants should submit their completed application forms, along with the required application costs, to the Division of Water Resources at the relevant Environmental Field Office. The application is subjected to a thorough examination, and the applicant is notified when the examination is completed. The review procedure typically takes ten days, and it must be completed within 45 days of the day the application was submitted, unless an extension has been granted.

What Fees Are Required?

New Conventional or Large Diameter Gravelless Pipe SSDS Permit	$400 up to 1000 gallons per day design flow$100 for each additional 1000 gpd flow
New Conventional or Large Diameter Gravelless Pipe SSDS Construction Inspection	$100
New Alternative SSDS Permit	$500 up to 1000 gallons per day design flow$150 for each additional 1000 gpd flow
Alternative SSDS Construction Inspection	$200
Experimental SSDS Permit	$500
Repair Permit	No permit fee
Repair Construction Inspection	$100

What Are My Rights and Responsibilities After the Permit is Approved?

The applicant has the authority to carry out the activities that were granted in the permission application. They are responsible for notifying the Department of any changes to the information in the application. The applicant is responsible for complying with any state legislation and regulations that may be applicable. A system’s installation must be reported to the Division by the applicant or installer of the SSDS so that it may be examined and certified as compliant. Applicants who have had their permits rejected, suspended, or cancelled have the opportunity to file an appeal with the appropriate authority.

What Are the Division’s Rights and Responsibilities After the Permit is Approved?

During each SSDS installation, the Division inspects the system to confirm that it was installed in line with the permit conditions and regulatory requirements. In the event that an applicant fails to comply with state legislation or departmental rules, the Division has the authority to revoke, suspend, or refuse the issue of a permit.

Any individual who violates or fails to comply with state legislation, rules, or regulations may be susceptible to civil fines as a result of their actions.

Whom Do I Contact For Applications, Assistance and Other Information?

Applicants can acquire applications and information from the Environmental Field Office that is most convenient for them.

Applicants may refer to the following publications for further information:

• TDEC Rule 0400-48-01: Regulations to Govern Subsurface Sewage Disposal Systems
• TCA Section 68-221-401.414: Subsurface Sewage Disposal Systems
• TDEC Rule 0400-48-01: Regulations to Govern Subsurface Sewage Disposal Systems

Municipality of Anchorage

A COSA must be completed prior to the transfer of ownership of a residence with a septic system or well, according to municipal code. Obtaining this certificate, which verifies that a qualified engineer has examined the on-site systems and determined that they are adequate for the residence they serve and fulfill code standards, is the seller’s responsibility. The results of the tests and other information gathered are submitted to the On-Site Section for assessment and issue of the Certificate of Compliance.

Alternatively, if the statutory separation lengths for the well or septic system cannot be fulfilled, the residence may be eligible for a separation distance waiver for the well or septic system, which is evaluated on an individual basis.

Subdivision​Using Water and Wastewater systems

A COSA must be completed prior to the transfer of ownership of a residence that has a septic system or a well, according to municipal code. Obtaining this certificate, which verifies that a qualified engineer has examined the on-site systems and determined that they are adequate for the residence they serve and fulfill code standards, is the responsibility of the seller. In order to issue the COSA, the On-Site Section must analyze the test findings as well as any additional data that has been gathered.

It is possible that a residence will qualify for a separation distance waiver for the well or septic system if the statutory separation distances cannot be fulfilled; however, this is assessed on an individual case basis.

​Business/Installers Certification

Excavators, engineers, well drillers, and well pump installers are all required to be qualified by the On-Site Water and Wastewater Section before working on the site. In order to do this, the On-Site Section organizes certification courses for engineers, excavators, well drillers, and well pump installers, among others. Read on to find out more ​

Codes, Policies, and Guidelines

Throughout the Municipality of Anchorage, the following Codes, Policies, and Guidelines apply to private well and septic systems that serve up to two residential units.

Glossary​​

The following are definitions for words that are widely used in connection with wells and septic systems. Contact us at (343-7904) if you require further information. ​

Environmental Health Division Fee Schedule

Environmental Health Services
Soil Evaluation per Parcel (3 boring max. location)
Single Family	300
Soil Evaluation / Individual Soil Boring Single Family	100
Per building site commercial	325
Per building soil boring commercial	175
Alternative Technology Vacant Land Evaluation/prelim. review	500
Sewage Disposal Permits
ResidentialNew Construction Single Family	350
New Construction Single Family w/engineer plans	550
Replacement Septic Permit Single Family*	275
Replacement Septic Permit Single Family w/engineer plans*	450
Single Family Septic Tank only	150
Alternative Technology Operating Permit	30
Permit Renewal	50% of permit fee
Commercial

• A Commercial Sewage Permit for 1000 gpd without engineer plans* is required.

• A Commercial Sewage Permit for 1000 gpd without engineer designs is required.

150
Re-inspection Fee – when construction does not comply w/approved permit	100
Plan Review Resubmission Fee	150
*For Replacement Permits add appropriate Soil Evaluation Fee to Permit Total
Water Supply Permits

• (The fees do not include any charges for water quality testing.)

Single Family/Residential Test Well/Irrigation Well/Vertical Closed Loop Geothermal	275
Public Water Supply:

400
Certified Operator Training	75
Commercial Process/Irrigation Well	275
Test Well for Commercial Projects	300
Permit Renewal	50% of permit fee
Field Related Services
Hydrogeologic Plan Review	646
Subdivision Plat Review:

• Subdivision Plat Review (Onsite Water Supply Only)
• Subdivision Plat Review (Onsite Water Supply Only)

• Subdivision Plat Review (Onsite Water Supply Only)
• Subdivision Plat Review (Onsite Water Supply Only)
• Subdivision Plat Review

• Subdivision Plat Review (Onsite Water Supply Only)
• Subdivision Plat Review (Onsite Water Supply)

1,166
Septic Installers License – New	210
Yearly Renewal	79

53
Hearing before the Health Officer	100
Hearing before the Board of Appeals	275
Public Assemblage Permit	200
Field/Office Review for Additions/Remodel	75
Horizontal Closed Loop Geothermal	75
Community HealthSafety Programs
Department of Human Services:

• A public swimming pool (new construction)
• A first opening inspection of a public swimming pool

100
Public Assemblage Permit	200
Mobile Home Park Plan Review	1,030

100
Cemetery Plat Review	131 plan review + 200 soil evaluation
*$75 for each additional pool/spa at the same address
Body Art
Body Art Plan Review and major remodeling of existing establishment (including consultation, construction, pre-opening, and 30 day follow-up inspection)	600
Re-inspection Fee – Follow up of Critical Violations	100
Enforcement Hearings	150 + follow-up inspection costs
Remodeling or Renovating of Existing Body Art Establishment (Plan Review)	275
Change of Ownership	200
Temporary Body Art Establishment license/inspection and plan review

• A completed and submitted application that is received 10 days or more before to the event

• A completed application that is received fewer than 10 days before the event

500
Food Service
Food Service Plan Review and major remodeling of existing establishment*

1,926
MobileSTFU Plan Review (NEW)	500
MobileSTFU Plan Review (Change of Ownership)	250
Fixed Change of Ownership/Use	250
Remodeling or Renovating of Existing Food Service Establishments (Plan Review)	50% of new
Re-inspection Fee	100
Compliance/Informal/Formal Enforcement Hearing	100/200/300 +follow up inspection costs
MDARD Requested WellSeptic Inspections	238

205 +State Fee

Temporary Food Service Establishment

• Applications must be completed and sent at least 5 days prior to the event.

125 + State Fee
Completed application received less than 5 days prior to event	150 + State Fee
Fee for operating without a license	200 + State Fee
Special Transitory Food unit(1) (2)	112 + State Fee

90
Annual Food Service Sanitation License (1) (2) (3)
Seating Capacity0 – 25	627 +State Fee
Seating Capacity26 – 50	680 + State Fee
Seating Capacity51 – 75	820 + State Fee
Seating Capacity76 – 100	898 + State Fee
Seating Capacity101 – over	1,010 +State Fee
Schools (1) (2)

627+ State Fee
Fraternal, Civic, Non-profit and Religious organizations	627+ State Fee
1. Fee 50% of annual rate after 10/31 for applications for new owner or establishment.
2. Penalty fee (% of food service license fee) for license renewal after April 30 th.

75% penalty + admin. action referral

3. If the food service establishment operates less than 6 months/year the license fee will be ½ the regular fee as stated in the fee schedule.

*Fee includes consultation and inspections for construction, pre-opening, opening and operating.

Permits – Well & Septic

Before submitting an application for a well or septic permit, check with your township to ensure that a municipal system is not already in place.

Forms

In order to obtain a well and/or septic permit, you will need the following documents:

• Completing the Well/Septic Permit Application (Fillable) (PDF), which should include your ten-digit parcel identification number
• Drawing of the Boundary/Grid Fill in the blanks of a Site Evaluation Grid (PDF) for the location where you’d want to test (seeSite Evaluation Grid Example (PDF))

• Lot lines, important structures, subsurface utilities, and other relevant information should be included in your picture. Systems for replacement: It is necessary to identify the position of the present system as well as the anticipated location for the new system.

• If appropriate, complete the Designated Agent Assignment Form (PDF). Fees – we take cash, credit card, and check payments.

Additional Well Forms

• Should it be necessary, complete the Designated Agent Assignment Form (PDF). Cash, credit card, or cheque are accepted as forms of payment.

Commercial Buildings

• For all commercial or industrial buildings and/or enterprises, a Commercial Worksheet (PDF) is required.

Application and forms can be submitted through email to [email protected] or faxed to 517-788-4616, however you will be required to call and make payment with a credit card over the phone, visit the office, or send all of your information to the following address:

Jackson County Health Department Environmental Health Division

Jackson, Michigan 49202 1715 Lansing Avenue, Suite 001 Following the completion of your permit application and payment, as well as the completion of a well site evaluation and/or a septic soil evaluation, the permits will be provided to you. The licenses will be issued by the sanitarian on the basis of the information acquired during the evaluations. Once the permits are issued, a clerk will send them to the homeowner or applicant through email, fax, or regular mail.

The homeowner and/or applicant is responsible for obtaining the necessary permissions for the installer (s). An original copy of the permits should be kept on site until the job is completed.

Septic systems must be installed by a licensed installer.

By phoning the Environmental Health Division at 517-788-4433, you may find out whether or not an installer has been assigned. A sanitarian must check a septic system after it has been installed but before it has been fully operational to ensure that it is in accordance with the permit requirements. Following the completion of this inspection by a sanitarian, a septic final will be completed, filed, and mailed to the homeowner.

Well systems must be drilled by a licensed installer

. You may find out about the current status of an installation by visiting the State’s website at. Although it is not needed, it is advised that the pump be installed by a licensed installation. The following items will be required by the Environmental Health office in order to complete a well:

• Pump setting must be communicated to the public in advance
• Well placement and construction must be done correctly. In order to submit a well log to well logic or the health department, the installer must do it within 60 days. A pump record must be submitted by the installer within 60 days of installation. Safe coliform bacteria water sample taken by a State Certified lab (seeWater Testingtab)
• Well Abandonment Log (if applicable) – must be submitted within 60 days after completion of the well

As soon as the office gets all of the relevant information, the sanitarian will analyze the information and complete all of the paperwork. Once the work is done, a notification and the necessary papers will be delivered to the homeowner.

Permit Extension

If an extension of a permission is required, a request for an extension of the permit for up to an extra year can be sent to our office.

• Form for requesting an extension of a well or septic permit (PDF)

Johnston County, North Carolina Environmental Health Department

State Regulations for Off-Site Wastewater Systems: Approval of Innovative Wastewater Treatment Systems Check on the status of a Septic Permit Application for a Septic System and Well by visiting this page. (A fillable PDF version of this document is now accessible online.) septic tank systems are underground wastewater systems that comprise of a settling tank and a drain field. On-site wastewater is defined as wastewater generated on the premises. This system’s primary function is to confine solid waste and sterilize the wastewater produced by a house, company, or other facility, among other things.

These are some examples:

• Determining whether or not a property is appropriate for a septic system by evaluating its physical characteristics
• Depending on the results of the lot examination, a permit may be granted or denied. When septic systems are established, they must be thoroughly inspected to guarantee appropriate installation. Taking criticisms from the public into consideration
• And Septic systems that are not operating properly are evaluated and a suitable strategy to fix the system is determined. Inspection and maintenance of big septic systems, including septic systems with pumps, to verify that they are operating properly

The Septic System Permitting Process

1. When an Application for Service is presented with a document from the proper planning and zoning authority, the application is accepted. When applying for a septic tank permit or permits for multiple septic tanks, a site plan of the land is necessary. The site plan is a design that depicts the shape and size of the land, as well as the state road number, as well as the driveway and home (or other buildings) that are located on the premises. In order to determine the position of the structure, the site plan must include setbacks (or distances) from the highway right-of-way and at least one additional property line in addition to the right-of-way. If you require assistance, a schematic from GIS will be printed for you. Fees are evaluated and determined based on the services that are sought. See the current pricing schedule for further information. The application is allocated to an Environmental Health Specialist when the costs have been paid
2. The Environmental Health Specialist will call the applicant to organize an appointment for the evaluation. In the event of an emergency, the applicant should call the Environmental Health Specialist immediately for assistance. They are available at the office between the hours of 8:00 a.m. and 9:30 a.m., Monday through Friday
3. Before the Department examines the property, the applicant should rough-stake the area that needs to be examined as well as the placement of the building (house, mobile home, business, etc.). After the property has been analyzed, the Department will notify the applicant of the results. If the land is acceptable for the proposed purpose, it must be surveyed and a plat submitted for final review, together with the accompanying plat fee, before the project can be completed. It is necessary to file a permit if there is no need for a survey
4. The permission can be released upon receipt of the relevant zoning permit and any additional payments. Once an applicant has obtained a valid zoning permission as well as an Environmental Health permit, he or she may submit an application for building permits to the Building Inspections department.

Items Needed to Process A Water and Sewer Authorization

• Installation of a septic tank and completion of an inspection have been completed. The well has been constructed and the inspection has been finished. A well log that has been prepared by the well contractor must be kept on file in the office. a negative bacteriological water test is necessary prior to approval of the well
• The well log is located in the left-bottom corner on the well permit
• Providing an electricity supply and arranging a water test are both the applicant’s duty in order for the water sample to be collected. The test can be performed either by the Environmental Health Specialist who has been assigned to you or by a private laboratory. If the test is conducted by an Environmental Health Specialist, the findings will be available in about one week after the test is completed. The sample must be collected by a trained lab technician who works for the private facility where the test is being performed if you hire one. It is just for informational purposes that we are collecting the nitrate, nitrite, and inorganic water samples
• Nonetheless, they are needed by the State of North Carolina.

Following the completion of all requirements, the Environmental Health Specialist will complete a water and sewer permission form. A copy of that form is sent to the Department of Building Inspections so that a final inspection may be performed and a permanent power can be granted.

Repairs

Specifically, according to 15A NCAC 18A.1938 (c), the person who owns or controls the system is responsible for assuring compliance with all applicable laws, rules, and permit conditions pertaining to the system’s location and installation as well as its operation, maintenance, monitoring, reporting, and repair. If you are experiencing problems with your septic system, please call us and we will happily analyze the situation to see whether a repair permit is required and create a solution that is acceptable for your situation.

Please see the Why Septic Systems Faildocument for further information about failed septic systems.

Pump Inspections

Every five years, Johnston County Environmental Health is mandated by the State of North Carolina (15A NCAC 18A.1961 j) to examine all septic systems that use an effluent pump and to report the results to the public. Prior to the inspection, a letter is mailed to the homeowner, who can then contact to schedule an appointment with the inspector.

Following the completion of the inspection, the inspector will complete an inspection report, which will be forwarded to the property owner. Take a look at the Pump diagram.

Important Links

• Soil Consultants who work for themselves
• Septic System Installers who work for themselves
• Septage Pumper List
• Septic System Owner’s Guide
• Private Soil Consultants who work for themselves. Instructions on How to Dismantle a Septic System
• Septic System Maintenance
• Pump Diagram
• Septic System Maintenance
• ‘Soil Facts’: The Reasons Why Septic Systems Fail What not to flush down the toilet or put in your sink (if you have a septic tank)

On-Site Water Protection (Well and Septic Permits)

Site study, permitting, and inspection of septic systems and wells are all provided by Franklin County Environmental Health in the county of Franklin, North Carolina (NC). In addition, the agency provides advice and repair permits for septic systems that are not functioning properly and for wells that have been damaged. For further information on these services, please refer to the descriptions provided below.

Requesting a copy of a permit

Those who have obtained well and septic system permits in Franklin County will be able to access them through Franklin County Environmental Health. In order to receive a copy of an approved septic or well permit, please contact the department by phone or email. The following information will assist you in locating the permit:

• When the permit was issued, as well as whether or not the septic system or well has been constructed
• ANY and ALL names (including those of the builder or developer) that may be involved with the permission are required to be disclosed. The address of the property (911 address, subdivision and lot number, property PIN number, and property tax ID number)
• The location of the property

Obtaining a Permit for New Construction or Renovations/Additions

Applications for a new well or septic system permit, as well as for an inspection of an existing septic system, are submitted to the Franklin County Planning and Inspections office in Frankfort. The application must be completed by the property owner or a representative approved by the property owner. In addition to the application, a site plan (site plan worksheet) or a plat must be submitted. The site plan does not have to be drawn to scale, but it should be indicative of the overall location.

A one-year period begins on the date of issue and ends on the date of cancellation.

New septic system or well

Before organizing a site evaluation, it is necessary to prepare the site (site prep instructions). To advise Franklin County Environmental Services that the site has been prepped and is ready for examination, call or send an email to the department. While the examination is being completed, you may book an appointment time to be present on site with the professional to assist them. If you opt not to be present on site, the specialist will call you if there are any queries or difficulties with the site; alternatively, the specialist will finish the permit and email it to the contact information you provide on the application.

Existing septic system inspection

Various types of property improvements may necessitate an examination of an existing septic system in order to get a reuse, expansion, compliance, or relocation septic permit for the project. A site plan illustrating the planned improvement must be submitted. Existing septic system inspections are necessary for the following reasons:

• Replacement of a mobile home
• Use of an existing septic system for a new house
• Renovations or additions that increase the number of bedrooms or occupants
• Additions that increase the footprint of the structure
• Construction of detached garages or structures
• Installation of an in-ground swimming pool
• Receipt of additional regulatory compliance certificates (for example, clearance from the Lake Royale POA or local municipality)

After submitting your application, you should contact Franklin County Environmental Health to arrange for an inspection to take place. Depending on whether the planned improvement is legal, the permit will either verify permission or indicate the measures that must be completed in order to bring the project into conformity.

Septic system or Well Repair permit

Please call Franklin County Environmental Health Services to speak with an expert about the nature of your septic system or well concerns. It is possible to resolve septic or well problems for homeowners over the phone in some cases. Typically, a visit to the property is required in order to identify the problem and propose remedies.

In the event that a repair permit is required, an expert can assist with the application procedure. When replacing a well pump or doing plumbing repairs, you do not need to get a permission from the city.

Operations permit (Installation inspections)

A septic system installation, well grouting, or well head inspection are all required to be reported to Environmental Health Services by the contractor. Installers of septic systems, well drillers, and plumbers should contact the department the day before, but no later than 9:00 a.m. on the day of the inspection they require. During the inspection, the specialist will look for compliance with applicable North Carolina laws and regulations, as well as compliance with any permit requirements.

New well water testing

In North Carolina, all new wells must be sampled and tested for bacteriological quality as well as 17 inorganic criteria, among other things. There is no price for the initial sample of a new well. Allow the water to run until the chlorine residual (left over from the construction process) has faded once the well construction is complete. If there is a period of time between the building of the well and its usage, it is possible that there will be no chlorine residue present. Contact Environmental Health Services to schedule a time for the sample to be done if there is no chlorine left in the water after the test.

Contractor certifications

Septic system and well maintenance, installation, repair, and private inspection services are all performed by individuals who are licensed by the state of North Carolina to provide these services. Additionally, a qualified plumber may do pump and plumbing maintenance as well as disinfection services for private wells. The North Carolina Onsite Wastewater Contractor/Inspector Certification Board is a non-profit organization. The North Carolina Well Driller Certification Board

Additional Resources

• Regulations for sewage disposal in North Carolina
• North Carolina Sewage Rules
• North Carolina On-Site Water Protection Branch
• Septic System Maintenance
• North Carolina Sewage Disposal Regulations Why Do Septic Systems Fail? – North Carolina State University NCSU – Septic System Owners Guide
• NCSU – Septic Systems and Their Maintenance
• NCSU – Septic Systems and Their Maintenance Septic Information from the NESC

Department of Environmental Quality : About Septic Systems : Residential Resources : State of Oregon

In areas where houses and businesses are not linked to a municipal sewage system, a septic system is the most popular type of sewage treatment for those areas. When simplified to its most basic form, a septic system is comprised of two parts: a septic tank in which solids settle and decay and a drainfield in which liquid drained from the tank is treated by bacteria in the soil. Septic systems that are more sophisticated are constructed in places with high groundwater levels and/or poor soils.

Septic systems that are properly operating treat sewage in order to reduce groundwater and surface water contamination.

Learn more about how septic systems function by reading this article.

Before you buy

If the land is undeveloped, inquire as to whether the property has been examined for appropriateness for septic systems by either the Department of Environmental Quality or a local government contract agent, and if so, request a copy of the site evaluation report. The following are the questions you should ask:Has the site changed since it was last evaluated?

• Well construction, fill, roads, and other modifications can all have an impact on appropriateness. Is the land suitable for your development needs, taking into account the kind of system stated as acceptable on the report and the placement of the septic system that has been approved?

If the property has not yet been examined, you may choose to request that the present owner arrange for an evaluation to be done. Application for a site review can be made through either the Department of Environmental Quality or a local government contract agent. Before deciding to acquire the land, you must determine what sort of septic system will be necessary, as well as whether or not the permitted system site will fit your development requirements.

Existing sewage treatment systems- If you are considering acquiring a home with an existing septic system, you should engage a trained inspector to assess the system before making the purchase. Here’s what you need to know to find out more about:

• Is it true that the system was implemented without a permit? If not, it is possible that the system is very old (permits have been necessary since 1972, and in certain counties even earlier), or that it was unlawfully built. Systems that have been illegally developed may pose a threat to public health or produce pollution. In the future, you may be forced to upgrade or replace the system, and you may be held accountable and penalized if the system malfunctions or poses a concern to public health and safety. If your family or business has a large number of members, is the system the correct size to meet their needs? Permit documents often include information on the system’s capacity in gallons per day. Typical household water use is 450 gallons per day for a four-bedroom home. How old is the system, and has it been adequately maintained over its lifetime? Is there documentation demonstrating that the septic tank was pumped on a regular basis? Have there been any difficulties or complaints that have been brought to your attention in the past? It is possible that your local permitting agency has records of complaints or infractions that have not been addressed yet. Before you moved here, how many people lived in the house? Perhaps the approach works well with a single person but not so well with four individuals. Is the septic tank connected to all of the plumbing fittings
• And Is there evidence of a septic system failure, such as puddles over the septic tank or flooded drainfields? If the property is next to surface waterways, check to see that there are no direct discharges from the property. When it comes to septic system replacement, is there a suitable location if the existing system fails? In the event that there are any septic permit documents, they will show the replacement area that should still be “laid aside” for this purpose. What is the role of a qualified inspector? Some septic installers and pumpers have received training in the inspection of existing systems, while others specialize in the installation of new septic systems or pump tanks, as appropriate. Certified maintenance providers may also have the qualifications of a qualified inspector. The goal is to find out what their credentials are in septic system assessments (as opposed to only septic tank evaluations), as well as to obtain some recommendations. Verify the credentials of the references before hiring a contractor.

Signs of septic system failure

• Pools of water or wet places, unpleasant aromas, and/or dark gray or black soils in the vicinity of your drainfield are all signs that something is wrong. Water from the sewer overflows into the lowest drains in the house. The sound of drains gurgling and poor draining (first check for obstructions)
• Soapy flows onto the ground surface, into ditches, or into surface waterways It is impossible to mow over the drainfield because the earth is too soft.

Installing a new system

In order to have a new septic system installed, a two-step procedure must be followed. 1. Submit an application for a site review. The tests pits you give on your property will be evaluated by a DEQ or county agent, who will decide the size and kind of septic system that will be required, as well as the placement. 2. Submit an application for a building permit. For application forms, contact your local DEQ office or county agent, or you can obtain DEQ application forms from this website. There is a cost for both the site appraisal and the issuance of the building permit.

Maintaining septic systems

By having your septic tank tested for solids accumulation on a regular basis, you may prevent having to pay for expensive repairs. When the solids buildup in your septic tank exceeds 40%, you should have it pumped by a pumper who is licensed by the DEQ. For advice on how often to get your septic tank examined, contact the Department of Environmental Quality. Maintaining the condition of your septic tank on a regular basis (every 5 to 7 years) and checking for solids accumulation will save you money on costly repairs.

If you follow the basic septic system DO’s and DON’Ts, a properly designed and maintained system may survive for a very long period.