How Much Does It Cost To Have A Septic Tank Riser Installed? (Solution found)

How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400to install, parts and labor included.

  • Installing a septic tank riser will give you access to your septic tank at ground level by adding a piped shaft from the top of the tank to the ground level. A riser will cost you about $300 to $400 installed—very much worth it to give maintenance crew easy access should it needs repairs or maintenance. Click to see full answer.

Are septic risers worth it?

Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.

How much is a concrete septic tank riser?

The cost of a septic tank riser can vary, depending on the size, the material, the style, and your installer. Plan on spending at least $150 for a basic model, but know that they can cost up to $400, depending on the model you choose.

Should septic tank riser be above ground?

Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

How do you hide a septic tank riser?

The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.

How many septic tank risers do I need?

A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.

Can you bury septic lid?

Dig Up The Lids In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How much does a septic tank lid weigh?

The concrete covers also weigh 60 – 80 lbs. Because of the weight, many people are discouraged from removing the cover and doing an inspection. Modern plastic septic tank riser rings typically weigh less than 30 pounds.

Why does my septic tank have 2 lids?

Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. This tank has a way in (inlet), and a way out (outlet). So, most residential tanks should have (2) lids about 5′ away from each other. A septic tank holds all the liquid waste from your home (toilets, sinks, kitchen, bathtubs, floor drains).

How much does it cost to install septic riser?

Asked in the following category: General The most recent update was made on April 23, 2020. Installing a septictankriser will allow you to get access to your septictank from the ground level by constructing a piped shaft from the top of the tank to the ground level of your property. Ariserwill cost you around $300 to $400 to install, but it will be well worth it to provide maintenance crews with quick access should it require repairs or maintenance. An aseptictankriser is a pipe that can be built of plastic, fiberglass, or concrete, depending on the use.

The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.

This is a must-have if you want to get to your septic tank quickly for maintenance.

I used an adapter ring to attach the tank risers to the septic tank.

Furthermore, how do you go about installing a septic tank riser?

  1. Step 1 – Collect the components you’ll need
  2. Step 2 – Vacuum the top of your septic tank
  3. And Step 3 – Attach the Butyl Rope to the Tank Adapter Ring (optional). Step 4 – Place the Adapter Ring around the hole and screw it down
  4. Step 5 – Attach Butyl Rope to the bottom of each Riser
  5. Step 6 – Attach the Risers and Lids to the Adapter Ring
  6. Step 7 – Attach the Risers and Lids to the Adapter Ring

How much does it cost to maintain a septic system? A 1,500-gallon tank would most certainly be required for a house with five or more bedrooms, and this will cost between $15,000 and $25,000. According on the size and complexity of the work, the cost to replace an old septic system ranges from $3,000 to $7,000 (USD).

How much does it cost to install septic riser? – Kitchen

For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective. In most cases, the cost of installing a plastic septic tank riser is between $300 and $400, including components and labor.

How much is a concrete septic tank riser?

Sitting in your house for numerous years means that septic tank risers will not only be handy, but they will also be cost-effective. In most cases, the cost of installing a plastic septic tank riser is between $300 and $400, which includes both components and labor.

How many risers should a septic tank have?

For this sort of system, only a single riser is necessary for access to the pump chamber and the reservoir. For septic tanks that do not have two extra risers, you should locate your septic tank and install risers for both the inlet and outlet ports as explained above.

How much does it cost to install septic riser?

How Much Does a Riser Set You Back? For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective. Plastic septic tank risers are commonly installed for $300 to $400, which includes all components and labor costs.

How do you install a concrete riser on a septic tank?

Installing Risers in a Septic Tank is a simple process.

  1. Step 1 – Collect the components you’ll need
  2. Step 2 – Vacuum the top of your septic tank
  3. And Step 3 – Attach the Butyl Rope to the Tank Adapter Ring (optional). Step 4 – Place the Adapter Ring around the hole and screw it down
  4. Step 5 – Attach Butyl Rope to the bottom of each Riser
  5. Step 6 – Attach the Risers and Lids to the Adapter Ring
  6. Step 7 – Attach the Risers and Lids to the Adapter Ring

Should septic tank riser be above ground?

Landscaping around septic tank recirculation valves Septic tank risers, on the other hand, should never be buried.

To avoid groundwater entering the system, they should be 2 inches above final grade rather than 2 inches below final grade.

Why does my septic tank have 2 lids?

What is the purpose of having two lids on a septic tank? Pumping should be simple and convenient for both parties. The lid of the second chamber may be buried deeper than the lid of the first chamber on some occasions. It is possible that the pump will believe that there is only one chamber to pump as a result of this.

How do you hide a septic tank riser?

Riser Covers are used to protect the risers from damage. One of the most straightforward ways to conceal your septic riser is to just place something over it. Examples include a hollow, lightweight landscaping rock, a birdbath, a solar-powered sundial, or a colorful lawn ornament. When determining what to utilize, keep in mind some fundamental landscaping concepts.

How do you measure a septic tank riser?

Measure the diameter of the manhole cover: If it is between 26 and 29 inches in diameter, the riser will be able to fit into the tank entrance. Measure the distance from the ground to the top of the septic tank and add 3 inches to the total distance measured. If the distance between the two points is greater than 29 inches, a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required.

What is a Septic Tank Riser?

  • A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
  • Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.

Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. If you’re a homeowner in the United States who relies on a septic tank, you’re probably aware that they’re buried deep in the earth and can be difficult to detect and access when it comes time to do maintenance on them. As a result, you may be required to pay substantial digging and labor fees. With a septic tank riser, you can now find and manage your septic system more rapidly, which will allow you to put more money back in your pocket as a result.

What Is a Septic Tank Riser?

As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn. The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.

The Benefits: How Septic Risers Save You Money

As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years. However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.

No Digging Fees

You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank. Your septic tank will need to be recovered with earth once it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.

Reduces Labor Costs

Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently.

In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.

You’ll Only Pay for Materials and Labor Once

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.

Septic Tank Riser Styles

Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.

Concrete Septic Tank Risers

Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:

  • Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
  • Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection

Plastic Septic Tank Risers

Plastic septic tank risers are available in a variety of materials, including PVC and polyethylene, among others. Pros:

  • Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
  • They may be covered with sod to improve their looks
  • It is not susceptible to cracking like cement. Plastic is resistant to erosion.
  • It is possible to crush it beneath the earth
  • However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.

How Much a Septic Tank Riser Costs

Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.

See also:  How Small Can A Septic Tank Be? (Solved)

Installation Usually Requires a Plumber

In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.

They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.

Septic Tank Risers

In what capacity does an aseptic tank riser serve, and why would you require one? If your septic tank service worker has to dig up your yard every time your septic tank has to be cleaned, you do not have a riser built, and it is probable that you have a concrete cover buried someplace underground. The Ariser septic tank lid replaces your old septic tank lid, allowing you to access your tank from aboveground, making it easier to manage. It is possible that installing a riser will lower the cost of pumping your tank (this is not a guarantee; be sure to inquire).

It may even be possible to gain access to your septic main for cleaning and inspection depending on your external pipe system.

However, if you have an older system, the majority of tanks were built with concrete lids that frequently degrade and are typically buried beneath the earth.

Most septic pumping companies also provide riser installation, and it is typically less expensive to consolidate services rather than buy them separately because you save on service fees by doing so.

Septic Tank Riser Styles

Septic tank risers are available in a variety of designs and are composed of a variety of various materials, including concrete. Despite the fact that some are built of concrete (which are the most durable), some people find them ugly. Concrete risers are more difficult to construct and may need the use of special equipment to lift them off trucks, increasing the labor costs even if the materials are less expensive. Septic covers made of polyethylene, PVC, and other plastic materials are lower in weight and come in a variety of heights to meet your demands.

  • The majority of designs may be made to fit your specific height requirements.
  • It should be noted that the load-bearing capacities of the lids varies.
  • Riser pipes are available in a variety of sizes ranging from 8 to 24 inches in diameter, with lengths varying based on the depth of your tank entrance.
  • Although it is possible to cover them with sod and mark their location in order to be able to raise them for maintenance, this defeats the point of accessibility and may lose you of the potential savings that come from not having to dig out your cover every time it has to be serviced.

Septic Tank Riser Cost

Depending on the size, the material, the design, and the installation, the cost of a septic tank riser can vary significantly. Spend at least $150 on a basic model, but keep in mind that they may cost up to $400 depending on the model you select. If you have a twin septic tank, double the above figure by two. The labor and supplies are one-time expenses that will be soon recouped by not having to pay for digging when you want pumping or inspections of your system. Most of the time, they can be installed in a half-hour or less.

Septic Tank Riser? (how much, tanks, install, cleaning) – House -remodeling, decorating, construction, energy use, kitchen, bathroom, bedroom, building, rooms

Please registerto participate in our discussions with 2 million other members – it’s free and quick! Some forums can only be seen by registered members. After youcreate your account, you’ll be able to customize options and access all our 15,000 new posts/day with fewer ads.

Location: Atlanta, GA1,123 posts, read6,205,440timesReputation: 561
Has anyone had any experience with having a riser installed on their septic tank to allow for easier access for pumping?How much did it cost to have a PVC riser added?My tank is about 3-4″ under ground, and having the backhoe tear up my yard every 3-5 years is not appealing, therefore I was thinking about adding a riser/manhole.any thoughts/experience on this?
Location: Wilkes-Barre,Pa272 posts, read943,172timesReputation: 132
I just had mine done a few years back, I had new concret lid with a concret riser installed, I think it was $200, the guys that pump the tanks, like a big riser, it makes it easier to get everthing out.
Location: Las Vegas3,631 posts, read6,875,020timesReputation: 4364
JMHO.I would rather deal with the yard being torn up once every few years than see a lid everyday.Oh the other hand it does make access MUCH easier.
Find out if it will even make a difference. When we bought our house, we had to pay the inspector to find the septic. After moving in I had a company come out to install a riser since I did not want to pay for the “finders fee” each time I had my septic cleaned. Turns out I already had a riser. Even with the riser our lid is a couple of inches below the dirt. The houses we had looked previously had risers above the dirt. So I scrap the grass off the lid before the septic guys show up to avoid the fee.
Location: Atlanta, GA1,123 posts, read6,205,440timesReputation: 561
Quote:Originally Posted bySoHoVeJMHO.I would rather deal with the yard being torn up once every few years than see a lid everyday.Oh the other hand it does make access MUCH easier.I’m kind of torn on it.I think I could disguise the lid pretty well with where it would be situated with some plantings and pine straw, but I got a very rough estimate from my septic company and they quoted $1k!That seems kind of steep for me right now, perhaps I will wait 5 years till I need to pump it again and then just knock it out then.
08-04-2010, 04:35 PM
I wanted mine done right, had a few low quotes for a bandaid type install around 600.got it dont right for 1500, they dug it off, cut a hole in tank, conretd a riser in place, and attached a secure lid. My pump guy was impressed! No more digging tank up ruining my grass, and e-z access for pump guy. And my kids cant fall in or open!
Location: Indianapolis4 posts, read25,887timesReputation: 15
Does anyone know.if I was able to secure a copy of the permit with the drawing of both well and septic, would this be sufficient in helping the septic guy gain access?
Location: 2016 Clown Car.fka: Wisconsin738 posts, read916,597timesReputation: 1201
I’ve owned 5 homes during my lifetime and each one was in a rural community and had a septic tank.On each one, I had risers installed.The current one hastworisers.To disguise the covers, we did a bit of landscaping that included edging and then filled in the area with colored, crushed stone.The risers are also covered, but only lightly and then large pots filled with plantings are set on top of the stone.In order to access the covers, I simply brush aside the stone, unlock the cover and allow the pumper to do his job.Because our tank is located in a really, really inconvenient place in our yard, this was the best solution.And having lived with so many tanks in so many yards, I seriously do not even notice it anymore.RVcook
I grew up in a house with well and septic.I’ve been surprised by the number of people that say they have to pump their septic tank on a regular (every couple years) basis.I thinkwe had ours pumped once in 10 years or so and that was because the old metal tank (installed in the 1930s) was failing (rotted through0 we replaced it with a new concrete tank and then went I think 15 years or more without aving a problem.As I understand it people need to pump because they don’t watch what they ‘feed’ into the tank.You put in chemicals that kill the bacteria and it doesn’t processthe waste.The funny thing is that now I hear of major sewer systems developing plans to limit what gets flushed down the toilet.No old medicine, cleaning chemicals, baby wipes, none of this went down at our house.Then again maybe we were just lucky:-)
Location: 2016 Clown Car.fka: Wisconsin738 posts, read916,597timesReputation: 1201
Quote:Originally Posted byMidValleyDadI grew up in a house with well and septic.I’ve been surprised by the number of people that say they have to pump their septic tank on a regular (every couple years) basis.I thinkwe had ours pumped once in 10 years or so and that was because the old metal tank (installed in the 1930s) was failing (rotted through0 we replaced it with a new concrete tank and then went I think 15 years or more without aving a problem.As I understand it people need to pump because they don’t watch what they ‘feed’ into the tank.You put in chemicals that kill the bacteria and it doesn’t processthe waste.The funny thing is that now I hear of major sewer systems developing plans to limit what gets flushed down the toilet.No old medicine, cleaning chemicals, baby wipes, none of this went down at our house.Then again maybe we were just lucky:-)This is an excellent point.Having lived with this type of system, it is a no-brainer about what is flushed or not which has a huge impact on how a ‘healthy’ system functions.City-folk don’t seem to understand that there are just some things that shouldn’t go down there.However, in our state, the DNRrequiresthat all septic systems must beinspectedevery three years.While certainly helpful for aging systems that could have the potential for failure, to me it’s just their way of making sure I do my part to keep the local pumping company in business.When I questioned the pumper about this so many years ago, he explained his procedure for inspecting the system which(of course)he is unable to evaluate thoroughly unless the tank is empty.So in states like mine, access to the tanks must be made every three years.In the case of my current system, because it was a complete tank replacement, it automatically came with two access ports because it is a two chamber tank so the risers were just a ‘given’.RVcook
Pleaseregisterto post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned. Detailed information about all U.S. cities, counties, and zip codes on our site:City-data.com.

All times are GMT -6.

How much does a septic riser cost?

The average cost in the United States is $3,918. Septic tank risers are often built of polyethylene, polyvinyl chloride (PVC), or concrete. However, while concreterisers are the cheapest (about $100), they are also the most heaviest and trickiest to install. Arisers manufactured of polyethylene or PVC will normally cost between $200 and $300, depending on their size and complexity. What is the function of a riser in a septic system? The riser of an aseptic tank is a concrete or plastic pipe that extends vertically from the pump-out holes or access ports at the top of the tank to about ground level.

In the same way, how many risers should a septic tank have is another question.

First, I attached a 24 x 12tank riser first, then a second 24 x 6tank riserfor more height, and lastly a 24 inch flat lid.

You’ll never have to dig yourself out of a hole again.

Septic tank costs can range from as little as $600 to as much as $1,500. Plastic septic tanks ranging in size from 750gallons to 1,500gallons cost between $500 and $1500. Concrete septic tanks ranging in size from 750 to 3,000 liters cost between $1,300 and $5,000.

Septic Tank Riser Installation Can Lower the Cost of Running Your System

It is strongly suggested to install septic tank risers as an additional component of your sewage disposal system. The riser makes it considerably more convenient and much easier to monitor and maintain the system as a whole. In the long run, this will avoid possible septic tank issues from occurring. Most states in the United States mandate the installation of risers on newly constructed or updated septic systems. Unlike many other government regulations, this is one requirement that really provides benefits to the homeowner who complies with it.

  • Yes, it is, and it is also most likely one of the least known and least watched systems that you have in your possession.
  • Unfortunately, this kind of thinking might end up costing a lot of money in the long run.
  • Now, add the interest expense to the $15,000 and divide the total by the system’s expected lifespan.
  • You’ll discover that your system is costing you more than $1,000 per year in operating expenses.
  • Learn everything you can about your system’s operation, and have a qualified plumber check on it on a regular basis to ensure that it is operating properly.
  • We serve the cities of Brandon, Plant City, Haines City, Lake Wales, Poinciana, and Tampa, as well as the counties of Hillsborough, Pasco, and Osceola in the state of Florida.

How much does it cost to install a riser? – nbccomedyplayground

How Much Does a Riser Set You Back? For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective. Plastic septic tank risers are normally priced between $300 and $400 to install, including materials and labor.

Are septic risers worth it?

It is advantageous to use a riser. It may be more expensive up front, but in the long term, it will save you the trouble of having to dig in another spot. Fortunately, setting up a riser is a straightforward and common task. It is possible for your expert to locate your tank using a camera or a ground probe if you do not know where it is placed.

How many risers should a septic tank have?

For this sort of system, only a single riser is necessary for access to the pump chamber and the reservoir. For septic tanks that do not have two extra risers, you should locate your septic tank and install risers for both the inlet and outlet ports as explained above.

Should septic tank riser be above ground?

Landscaping around septic tank recirculation valves Septic tank risers, on the other hand, should never be buried.

To avoid groundwater entering the system, they should be 2 inches above final grade rather than 2 inches below final grade.

Should I bury my septic tank lid?

The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them. A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank.

Does my septic need a riser?

A service riser should be put in deep septic tanks to provide access to the tank. If the septic tank is sunk more than a few inches below the surface of the earth, good practice calls for the installation of a septic riser, which is a high diameter pipe that allows for easy access to the septic tank for inspection and cleaning.

How many lids should a concrete septic tank have?

It is possible that your system will comprise two or three lids. Unusually for this type of structure, the typical size is roughly 5 by 8 feet. In the majority of cases, the lid is buried between 4 inches and 4 feet underground.

Should septic tank lid be sealed?

Septic systems, like wells, can develop difficulties if they are not properly protected from outside surface water. The majority of septic systems rely on subterranean pipes to transport waste away from the property. The lid covers should be snugly fitting; if they aren’t, a firm that specializes in septic repairs should be contacted to make the necessary repairs.

How much weight can a septic tank riser lid hold?

The Orenco Systems DuraFiber riser lid, which is made of solid fiberglass and features a flat-style lip for PVC and HDPE tubing, is 24 inches in diameter. It weighs only ten pounds, yet it is resistant to harm from lawn equipment and can take a weight of 20,000 pounds without breaking.

How much does it cost to install a septic system?

A septic system can cost anywhere from $3,000 to $15,000 to have professionally installed, depending on the criteria indicated above in the cost estimate.

Can I install my own septic system?

Installing your own septic tank and system is permitted, but you must first get a septic tank permit and have your soil tested for percolation before you can proceed.

How do you install a septic tank?

Steps Prepare and develop your system before you start. Performing a site survey and conducting a percolation (soil) test on the area where the POWTS is to be placed are both required initial steps in any septic system installation. Wait for permission before proceeding. The system may be deployed once all of the relevant permissions and approvals have been obtained.

How much to install septic tank system?

The average cost of installing a new Septic Tank Epping system is $3,918; however, prices can range anywhere from $1,500 to more than $5,000.

Post navigation

A septic tank has to be replaced and maintained on a regular basis, which is a vital component of house ownership. Find out all you need to know about septic tank replacement prices, how to maintain a septic tank, and more in this comprehensive guide.

How Much Does It Cost To Replace A Septic Tank?

The cost of replacing a septic tank ranges from $3,000 to $10,000. Septic tanks range in price from $2,500 to $15,000, with the lowest end costing approximately$2,500 and the most costing approximately$15,000. For a new septic tank, which includes expert installation, you could expect to pay around $4,000.

Septic Tank Cost by Tank Size

The expense of a septic system increases according to the size of the tank. Larger tanks are, without a doubt, more expensive than smaller ones. A 500-gallon tank costs between $500 and $1,000, a 1000-gallon tank costs between $1,000 and $1,500, and a 2,000-gallon tank costs between $3,000 and $4,000, depending on the manufacturer.

If you live in a residential house, it is doubtful that you will require a tank of that size. The average capacity of a house septic tank is between 500 and 1,500 gallons.

Septic Tank Size Average Cost
500 gallons $500 – $1,000
750 gallons $700 – $1,300
1,000 gallons $1,000 – $1,500
1,200 gallons $1,300 – $1,650
1,500 gallons $1,500 – $2,200
2,000 gallons $3,000 – $4,000
3,000 gallons $4,500 – $6,500
5,000+ gallons $8,000 – $15,000+

Septic Tank Cost by House Size

The size of your home, like the size of your tank, is another simple method to determine how much a septic tank would cost. Septic tanks that are greater in size are required for larger dwellings. Rather of calculating the actual size of your home, a simple technique to determine the size of your septic tank is to multiply the number of bedrooms in your home. For example, a 500-gallon septic tank is required for a one-bedroom residence, which costs between $500 and $1,000. A 1,000-gallon tank will be required for a home with three to four bedrooms, and the tank will cost between $1,000 and $1,500.

The pricing will change in accordance with this.

House Size Septic Tank Cost
1 Bedroom Home $500 – $1,000
2 Bedroom Home $700 – $1,300
3-4 Bedroom Home $1,000 – $1,500
5-6 Bedroom Home $1,300 – $1,650
6-7 Bedroom Home or Small Duplex $1,500 – $2,200
Duplex or Small Apartment Building (under fourteen occupants) $3,000 – $4,000
Small to Medium Size Apartment Building $4,500 – $6,500
Large Apartment Building or Shared Community Tank $8,000 – $15,000+

Septic Tank Cost by Tank Type

There are various distinct types of septic tanks, each with its own set of features and pricing ranges to choose from. All of the alternatives are approximately equal in terms of cost, with the exception of fiberglass, which is somewhat more expensive than other options such as concrete.

Septic Tank Material Average Cost
Concrete Tank $700 – $2,000
Plastic or Polyurethane Tank $800 – $2,2000
Fiberglass Tank $1,000 – $2,300
Steel Tank $600 -$2,500

Septic Tank Made of Concrete Concrete is the most often used septic tank material, and it costs on average between $700 and $2,000 per tank, depending on the size. Concrete septic tanks will survive for several decades and are considered to be of moderate durability. Concrete tanks, on the other hand, might be subject to cracking and separation problems. It is necessary to examine concrete septic tanks every one to three years to search for cracks or other signs of degradation. A concrete septic tank’s lifespan will be greatly increased as a result of this.

  1. For starters, they are less likely to break than concrete septic tanks, which eliminates the need for frequent inspections and maintenance.
  2. However, because to their small weight, they may be prone to damage during the installation procedure.
  3. The use of plastic and polyurethane tanks is not permitted in every state, so check with your contractor to see whether plastic or polyurethane tanks are a possibility for your situation.
  4. Septic Tank Made of Fiberglass Fiberglass septic tanks have the benefit of neither cracking or rusting, which is a significant advantage.
  5. The fact that fiberglass is a lightweight material means that it may be installed for as little as 30 percent less money than a concrete tank.
  6. Fiberglass septic tanks range in price from $1,300 to $2,300, not counting installation costs.
  7. Steel is usually forbidden by municipal building rules, resulting in a decrease in the usage of steel in construction.

Installing a new steel septic tank is probably not a smart option; these tanks are often seen in older systems that have been in place for many years. A steel septic tank can cost anywhere from $600 to $2,500, depending on the manufacturer.

Installation Cost of a Septic Tank

In the case of a septic tank installation, labor costs account for between 50 percent and 70 percent of the entire cost. In most cases, the labor costs associated with building a septic tank will be more expensive than the cost of the septic tank itself in most cases. The cost of labor will vary significantly depending on where you live. Areas with greater expenses of living will also have higher labor costs than other locations, which means that constructing a septic tank in the Northeast or West Coast will be more expensive than in other parts of the United States.

Despite the fact that the tank itself costs somewhat more, fiberglass, plastic, and polyurethane are all less expensive to install than a concrete septic tank, resulting in a lower overall cost compared to concrete.

Cost to Replace An Old Septic Tank

When calculating the expenses of replacing a septic tank, a number of elements must be taken into consideration, including the replacement of the tank lid, the tank filter, the tank pump, and other components. The drain field repair is the most expensive component of a septic tank replacement, and it may cost anywhere between $3,500 and $10,000. Other aspects, on the other hand, are quite inexpensive, with some of them costing as little as $50.

Item Replacement Cost
Tank Removal $5,500
Drain Field Replacement $3,500 – $10,000
Tank Filter Replacement $250 – $275
Tank Pump Replacement $500 – $1,200
Tank Lid Replacement $30 – $70
Tank Baffle Replacement $25 – $50

Septic Tank Removal

The removal of a tank is one of the most important components of a septic tank replacement. Pumping the tank first and subsequently removing it are included in the cost of the service. This may vary based on local labor expenses, distance from the dumping site, dumping ground fees, the type of tank you have (lighter materials such as fiberglass and plastic will be quicker to remove) and the size of your tank.

Cost of Drain Field Replacement

Sewage drain fields, also known as leach fields, are the most costly components of a septic system to repair or replace. If the drain field becomes overburdened with fluids, it may flood, causing toilets and sinks to become obstructed. In order to determine how much it will cost to replace the drain field, the linear footage of the drain field must first be determined. Installation of the new filter or leach system will cost between$10 and $20 per linear foot, and digging up the drain field will cost $30 per linear foot.

Tank Filter Replacement Cost

The most typical sort of septic tank repair that is necessary is the replacement of the filter. Fortunately, it is reasonably priced, with prices ranging between $250 and $275.

Cost To Replace A Septic Tank Pump

An crucial component of a septic tank system, the pump allows you to drain your septic tank and remove waste, which is required every two to five years. Depending on the size of your pump, replacement may cost anywhere between $500 and $1,200.

Cost of a Septic Tank Lid

If you see any symptoms of damage to your tank lid, you may need to get it replaced. Concrete lids are prone to breaking, whereas steel lids corrode over time due to exposure to moisture. Septic tank lids are inexpensive, with replacements ranging from $30 to $70.

Tank Baffle Replacement Cost

The baffle guides waste within the septic tank in such a way that it does not disrupt the naturally occurring scum layer within it.

The cost of replacing the baffle is equally reasonable, ranging from $25 to $50.

Cost to Install a Septic Tank Riser

Unclogging and improving access to your septic tank is made possible by installing an underground piping shaft linking the tank to the surface of the earth. A septic tank riser may be purchased for between $300 and $400. Despite the cost, many people believe it to be beneficial since it allows the maintenance personnel to have easy access to the septic tank for any repairs that may be necessary as well as for routine maintenance inspections. Newer septic tanks are more likely to be constructed with a riser, but if you have an older tank, you can still choose to install one.

An installation task made more difficult by the weight of a concrete septic tank riser as opposed to a plastic one Concrete risers are available with holes that are square, circular, or rectangular in shape, as well as walls that are different lengths.

Because the price varies greatly depending on a variety of circumstances, getting many quotes from different contractors is the most effective approach to receive an estimate.

Because of their low weight, they are less difficult to install and remove than concrete, resulting in a reduction in the amount of work required.

Item Average Cost
Septic Tank Riser Installation $200 – $250
Concrete Riser (materials only) Price varies
Plastic Riser (materials only) $100 – $350

Septic Tank Installation Process

A septic tank installation is a lengthy and tough operation that involves a number of complicated processes. Expect the job to take between three and five weeks to complete from start to finish. Although it may take longer depending on the intricacy of the septic system you are constructing and the length of time it takes to complete your permits, it is often less than a month. Step one is to do soil testing. In order to determine how well the soil will filter and drain from the septic system, it is necessary to test it first.

  • If the findings of the test are positive, you will be able to obtain approval for the leach field (also known as drain field).
  • Developing a System Design is the second step.
  • A septic system design will cost around $600 to complete on average.
  • A modest clearing of a flat area without rocks is included in this price estimate; however, the cost of a more thorough clearing project will be greater.
  • In the process, this is the most critical step to do.
  • Prices for pipes will range between $25 and $35 per linear foot, while the tank would cost between $1,500 and $2,400.
  • Expect to spend somewhere between $3,500 and $10,000 for your car.
  • Permits for construction will cost between $250 and $500.
  • An additional pump alarm will cost around $700.

Step Seven: Pump Alarm Once the septic tank has been placed and the ground has been backfilled on top, be sure to add in the expense of any landscaping you want to do after the tank is installed. The cost of landscaping will vary greatly depending on the sort of landscaping that you want.

How Long Does a Septic Tank Last?

A septic tank has a lifespan of around twenty-five years. Between the ages of fifteen and fifty, this number might fluctuate dramatically. Septic tanks can last for several years depending on a variety of conditions. Septic tanks have a limited lifespan, and the material you pick will influence that lifespan. Concrete sewage tanks, when constructed properly, may survive for forty years or longer, whereas plastic septic tanks can last for thirty years or longer. Stainless steel septic tanks have a life span of twenty to thirty years at the most.

  • A septic tank should be examined every one to three years and pumped every three to five years, depending on the size of the tank.
  • Another aspect that affects the longevity of a septic tank is the kind of soil on which it is installed.
  • Unfortunately, there is little that can be done about this aspect.
  • Using your vehicle to drive over the septic tank leach field may cause it to become compressed and damaged; thus, avoid doing so.

Can I Install a Septic System DIY?

Because the labor expenses associated with constructing a septic tank are so high, you may be tempted to do it yourself instead. Nevertheless, the installation of a septic tank is a sophisticated and demanding operation, and any mistakes can result in costly repairs as well as contamination of water supplies and property damage. As a result of improper installation, it will be more difficult to sell your property and obtain insurance if you do not have the proper permits. In light of these considerations, it is strongly suggested that you hire a professional to build your septic tank for you.

How to Maintain a Septic Tank

Septic tanks are pretty simple to keep up to date. Every one to three years, they must be inspected by a professional, and every three to five years, they must be pumped by a professional. It is possible to maintain a septic tank by making sure nothing inappropriate is allowed to enter it. As a general rule, only human waste and toilet paper should be flushed together. Anything else, such as medications, chemicals, wet wipes, menstruation products, paper towels, tissues, and so on, should be disposed of somewhere rather than flushed down the toilet and into the septic tank, as described above.

Why Is My Septic System Failing?

In order to understand that very often we think that the septic troubles we are experiencing in the house are caused by a failing septic tank, it is vital to understand that this is not always the case. The following are two typical reasons why your septic system may be failing: There may be cracks, breakage, or clogging in the sewage pipe, among other things.

A sagging or a loose pipe might also cause problems with the line’s performance. 2. A problem with the leach field: it is possible that the field has reached the end of its useful life. Otherwise, clogging, drainage, and the distribution box may all have problems.

Septic Tank Replacement ROI

Rather than investing in a new septic tank system to boost the value of your property if you are going to sell your home, you would be better served investing in a different home improvement project. In fact, septic tank repair has one of the lowest return on investment (ROI) of all renovation projects, with a ROI of only 10-20 percent at best. The other hand, in the majority of states, such as Massachusetts, you are not allowed to sell a property unless it has passed Title V, which means you are not allowed to have a failed septic tank while selling your home.

Why You Should Install a Septic Tank Riser

Septic tank risers make it easier to access and pump your septic tank, which is beneficial for doing routine maintenance. Unfortunately, many older septic tank models are not equipped with septic risers, resulting in many homeowners being unsure of the location of their septic tank. When it comes to inspection and pumping appointments, homeowners who aren’t sure where their septic tank is are left with three choices: The following options are available: 1) examine public records to obtain a comprehensive map of their land, 2) dig up their yard, or 3) hire a plumber to dig up their yard and locate the tank.

Continue reading to find out more information.

What Is a Septic Tank Riser?

A septic tank riser is a pipe made of plastic, concrete, or fiberglass that rises vertically from the septic tank to the ground level, allowing you to have direct and simple access to your septic tank and drain field. At the top of the pipe, a lid is installed, which can either be left open to allow for simple identification or covered with a very thin layer of earth or grass. The following are the four most significant advantages of adding a septic tank riser:

  1. There will be no more digging: It is possible to look forward to never having to dig up your yard again for an inspection or pumping service once your tank riser has been placed. During the winter, it is simple to go there: Digging up the earth to get to your tank during the winter months may be extremely difficult, if not impossible, when the ground is frozen. Thanks to a septic tank riser, you may connect your tank directly to the rest of your system. Saves money in the following ways: During an inspection visit, most plumbing firms will charge you a lot of money if they are unable to locate your septic tank. A septic riser assists the plumber in quickly locating your tank, ensuring that you never have to worry about additional expenses. Saves time by avoiding repetitive tasks: It might take many hours to locate your septic tank. It is no longer necessary to hunt across your whole yard for your septic tank riser, which saves you a significant amount of time anytime you have maintenance appointments.

Call The Plumbing Experts!

Are you ready to put in a septic tank riser? The Plumbing Experts are there to assist you! Our professional plumbers are knowledgeable with all brands, models, and sizes of septic tanks, and they are here to make septic tank maintenance much easier by installing a septic riser in your system. Contact us today to learn more about our septic tank installation services. Our septic tank services include the following:

  • Septic tank repair, septic tank installation, and septic tank pumping are all services that we provide.

Leave all of your plumbing-related requirements to the most competent plumbers in the area, including repair, replacement, maintenance, and installation. The Plumbing Experts are known for getting the work done perfectly the first time. Make an appointment with us by calling (864) 210-3127 or contacting us online to schedule septic riser installation. We look forward to being of service to you!

The benefits of septic tank risers

Installing septic tank access risers will save you money as well as your back. Accessing the septic tank is made simple by the use of rippers. | Photo courtesy of the Michigan State University College of Agriculture and Natural Resources The process of finding and pulling up the lid to your septic tank may be time-consuming and frustrating. In many cases, homeowners aren’t even sure where to begin their search for the lid to their septic tank. Some people are just unable to pull themselves out of a hole.

  1. What method do individuals use to locate the buried treasure that is their septic tank lid?
  2. Others look for a clue, such as a dead spot of grass or other visual signals, to help them find their way.
  3. Whatever way you choose, digging it out is still necessary, and if the correct location cannot be discovered, another hole must be excavated.
  4. Some counties, such as Kalamazoo, Oakland, and Otsego, mandate that septic tank access risers be erected; these are just a few examples.
  5. Contact your Michigan County to find out about the most recent onsite waste water rules that apply to you.
  6. A septic tank riser is a pipe that can be built of plastic, fiberglass, or concrete to carry waste away from the tank.
  7. The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.

It goes without saying that any modifications to your septic tank or system will need to be approved by your county environmental health department or another qualified inspector.

You may arrange the installation of a riser in your septic system to coincide with your usual septic system maintenance schedule.

It is also possible that having a riser in place will dramatically lower the overall cost of septic tank maintenance over time, owing to the increased ease of access and reduced time spent on the operation.

MSU Extension Educator Beth Clawson can provide further information on the onsite waste water systems you may be interested in.

The Michigan Department of Natural Resources has a team of natural resources educators working to provide aquatic invasive species instructional programming and support throughout the state.

You can reach out to an educator using MSU Extension’s ” Find an Expert ” search engine by searching for “Natural Resources Water Quality” in the keywords field. Resources:

Did you find this article to be informative?

You Might Also Be Interested In

Leave a Comment

Your email address will not be published. Required fields are marked *