- A 1-2 bedroom house requires 750 gallons septic tank A 3 bedroom house requires 1000 gallons septic tank A 4 bedroom house requires 1200 gallons septic tank
How often does a 5000 gallon holding tank need to be pumped?
How often does my holding tank need to be pumped? A holding tank may need to be pumped every 30 to 90 days depending on how much waste is generated and the size of the tank.
How often does a 1000 gallon holding tank need to be pumped?
The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.
Is a 500 gallon septic tank big enough?
The minimum tank size for a three bedroom house is 1200 gallons. 500 or 750 gallon tanks used to be quite common in old houses, but they are not large enough for modern households, and are from a time without automatic washers, large spa tub, dishwashers, or multiple daily showers.
How deep should a septic tank be?
Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.
Are holding tanks legal in Wisconsin?
Holding tanks of any size that are connected to a building structure by a plumbing system, and receive only domestic wastewater, are subject to Department of Safety and Professional Services (DSPS) regulations. A holding tank of any size receiving 100% non-domestic wastewater will be regulated by the DNR under ch.
How big should a septic tank be for a 3 bedroom house?
The correct size of the septic tank depends mostly on the square footage of the house and the number of people living there. Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.
How do I calculate the size of my septic drain field?
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
Is a 1000 gallon septic tank big?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
How often should a septic tank be pumped?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
How much does it cost to pump a 1000 gallon septic tank?
The typical costs for septic pumping are as follows: National average cost for a septic tank pump out: $295-$610. Up to 750-gallon tank: $175-$300. Up to 1,000-gallon tank: $225 -$400.
Can a septic tank never be pumped?
What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.
Can you install your own septic system in Wisconsin?
Wisconsin Statutes dictate that a sanitary permit is required to install, repair or alter a private sewage system. The Sanitary Permit Application must be completed by a licensed master plumber.
How Big of a Septic Tank Do I Need?
The size and kind of tank required for a new septic system are the two most important considerations to make before beginning the installation process. Private sewage disposal is becoming increasingly popular in the United States, with 33 percent of newly constructed residences choosing for on-site wastewater treatment as part of their construction. Septic tank systems, in conjunction with a soil absorption system, or a drain field, are the least costly way of treating residential wastewater currently available on the market.
The typical size of a home septic tank is from 750 gallons to 1,250 gallons in capacity.
The system is made up of two major components: the tank and the drain, often known as the soil absorption field or drain field.
Oil, grease, and soap residue combine to form the scum layer on the surface of the water.
- With each filling of the tank, the effluent drains out of the tank and into the drain field, where it is absorbed by the earth.
- Septic tanks are commonly utilized in residential construction and can be classified into three categories.
- Polyethylene and fiberglass are one-piece products that are significantly lighter than steel.
- In order to determine whether or not you need a septic tank system, check with your local building department to see what laws and requirements apply to onsite wastewater treatment.
- The square footage of the property, the number of bedrooms, and the number of people who will be living there are all important considerations.
- Septic tanks for one and two bedroom homes that are less than 1,500 square feet and 1,000 gallon septic tanks for three bedroom homes that are less than 2,500 square feet are recommended.
- The figures listed above are only estimates.
- Before acquiring a septic tank system, speak with a professional plumbing contractor who is licensed in your region about the many septic tank alternatives that are available to you.
Get in touch with the Pink Plumber right away if you have any queries or concerns about your septic tank. Image courtesy of Flickr OUR EXPERT PLUMBERS ARE AVAILABLE TO HELP YOU.
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Hire a qualified specialist to assist you in developing a maintenance strategy; and Maintain your septic system by scheduling an annual inspection. Utilize the services of an effluent filter to limit the amount of particles that leave the tank, so extending the life of your septic system. Use Energy-Efficient Appliances and properly dispose of waste products. Every 2 to 3 years, or as often as is necessary for your system, have your septic system cleaned by an experienced and qualified specialist.
Avoiding a problem in the first place is vastly preferable to paying a high price later.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
This is mostly determined by the square footage of the house and the number of people that will be living in it, as well as other factors. A typical household septic tank holds between 750 and 1,250 gallons of water. Typically, a 1000 gallon tank will be required for a three-bedroom home that is less than 2500 square feet in size.
Septic Tank Size: What Size Septic Tank Do You Need?
Septic tanks are used for wastewater disposal and are located directly outside your home. Private wastewater management is becoming increasingly popular in the United States, with more than 30 percent of newly constructed residences incorporating on-site wastewater management. Do you require septic tank installation and are unsure of the amount of septic tank you require? When establishing a septic tank, the most important element to consider is the type and size of septic tank that you will be installing.
A number of factors influence the size of a septic tank, which are discussed in this article.
Basics of Septic Tanks
Your septic system is a self-contained chamber that is designed to retain the wastewater generated by your home. A septic system is comprised of two major components: the soil absorption area or drain, and the holding tank. Septic tanks absorb solid waste when wastewater is discharged into them, resulting in the formation of an asludge layer at the septic tank’s base. A layer of soap residue, grease, and oil forms on the top of the water. The effluent or wastewater is contained within the intermediate layer.
To discover more about how a septic tank works, check out our page that goes into further detail on how a septic tank functions.
The Main Types of Septic Tanks
Essentially, a septic system is a self-contained chamber that is designed to retain the wastewater generated by your home. It is composed of two major components: the soil absorption area or drain and the holding tank. Septic tanks accumulate solid waste when wastewater is discharged into them, resulting in the formation of an asludge layer near the septic tank’s foundation. At the surface, a sum layer is formed by soap residue, grease, and oil. Aqueous waste (effluent or wastewater) is contained inside the intermediate layer.
Water that has been collected in the septic tank flows out of it into the drain field, where it is absorbed into the soil. Check out our page that goes into further detail on how a septic tank works if you’d want to learn more.
- Septic tanks made of fiberglass
- Septic tanks made of plastic
- Septic tanks made of concrete
Concrete septic tanks are the most prevalent variety, but since they are so massive, you will need big and expensive equipment to build them. Fiberglass and plastic septic tanks are lighter than concrete and are therefore more suited for difficult-to-reach and distant locations. Before purchasing a septic tank, you should check with your local building department to learn about the rules and guidelines governing private wastewater management. You may also be interested in:Do you have a septic tank?
Why Septic Tank Sizes is Important
Due to its weight, the most frequent form of septic tank is concrete. However, because they are heavy, installing them requires large and expensive equipment. The reduced weight of fiberglass and plastic septic tanks makes them ideal for use in difficult-to-reach or rural locations. Consult your local building department for information on private wastewater management rules and codes before making a purchase decision. Do you have a septic tank? Also read this:
What Determines Septic Sizes?
Here are some of the elements that influence septic tank sizes; keep them in mind when making your purchase to ensure that you get the most appropriate septic tank for your property.
Consider Your Water Usage
The most accurate and practical method of estimating the appropriate septic tank size for your property is to calculate the quantity of water you use on a regular basis. The size of the septic tank required is determined by the amount of water that can be held in it before being drained into the soil absorption field. In many places of the United States, the smallest capacity of septic tank that may be installed is 1,000 gallons or less. The following are the suggested septic tank sizes for your household, which are based on your household’s entire water use.
- Making an estimate of how much water you use on your property is the most dependable and effective technique to determine the appropriate septic tank size. Depending on how much water it can contain and how much will be discharged into the soil absorption area, the size of your septic tank will be determined. Septic tanks must be at least 1,000 gallons in capacity in several regions of the United States. The following are the suggested septic tank sizes based on the total amount of water used by your household.
Consider the Size of Your Property
Another factor to consider when determining the most appropriate septic tank size for your home is the square footage of your home. The size of your home will determine the size of the septic tank you will require. For example, a dwelling with less than 1,500 square feet typically requires a tank that holds 750 to 1,000 gallons. On the other side, a larger home of around 2,500 square feet will require a larger tank, one that is more than the 1,000-gallon capacity.
The Number of Bedrooms Your Property Has
An additional issue to consider is the amount of bedrooms in your home, which will influence the size of your septic tank. The size of your septic tank is proportional to the number of bedrooms on your home. The following table lists the appropriate septic tank sizes based on the number of bedrooms.
- The amount of bedrooms in your home is another consideration when determining the size of your septic tank. You will require a larger septic tank the more bedrooms you have in your house. Depending on the number of bedrooms in your home, the following septic tank sizes are recommended:
The Number of Occupants
In general, the greater the number of people that live in your home, the larger your septic tank must be. In the case of a two-person household, a modest septic tank will be necessary. If your house has more than five tenants, on the other hand, you will want a larger septic tank in order to handle your wastewater more effectively and hygienically. When determining what size septic tank to purchase, it is important to remember that the size of your septic tank determines the overall effectiveness of your septic system.
As a result, it is critical that you examine septic tank sizes in order to pick the most appropriate alternative for your property in order to avoid these difficulties. Please contact us to determine the optimal septic system size for your North Atlanta, GA house.
Conventional Septic Systems
Septic tanks and underground soil absorption trenches are the basic components of a traditional system. Following first treatment in the septic tank, the effluent (partially cleared water from the septic tank) is sent to the conventional component for further processing. Gravity or a pump is used to transport the effluent to the conventional component. Assuming the conventional is higher than the tank, an additional pump will be required to raise the effluent to the conventional level. The traditional component is made up of a succession of trenches that are connected together.
- Every bedroom has a daily value of 150 gallons.
- The soil test provides the loading rate, which is used by the installation.
- This figure is the number of square feet that the conventional component must equal.
- There is a difference between the formulas used with leaching chambers and EZ-flows.
- It is necessary that the total square footage of all ditches equal 900 square feet.
- Depending on the situation, the typical component might consist of two trenches 6 feet wide and 75 feet long, or three trenches 6 feet wide and 50 feet long, respectively.
- Stonepipe, leaching chambers, and EZ-flows are the three methods of removing waste.
- The soil is responsible for the ultimate treatment of the effluent.
- The effluent created by the house or company is absorbed into the soil at the beginning of each trench’s excavation.
- The soil underneath the conventional component eliminates pathogens, organic matter, reduces pollutants by aerobic microorganisms, and forms ion bonds with negatively charged clay particles, all of which benefit the whole system.
Organic debris contained in the wastewater is consumed by these organisms, which aid in the elimination of infections. When using a traditional method, a minimum of 48 inches of acceptable soil is required, unless pre-treatment is employed. To get in touch with us, please click here.
What Size Septic Tank Do I Need
The size of an underground septic tank is referred to as its total volume handling capacity in this article, and it will be discussed in further detail later in this article. For additional information on above-ground septic tanks and systems, see our page on above-ground septic tanks. The minimum septic tank capacity requirements are determined by a variety of variables. State, county, and/or city regulations may specify permitted tank sizes, as well as tank materials and installation.
The size of the septic tank will vary depending on whether it is intended for domestic or commercial usage; in this section, we will cover residential use.
Shortly stated, the required size of a septic tank will be determined by the following factors: (1) the specific septic system type; (2) local government requirements; (3) the compatibility of the ground geology; and (4) the anticipated volume of wastewater depending on the size of the residence.
However, this is not true.
Furthermore, plastic septic tanks will not corrode, are weatherproof, are waterproof, are less expensive, are lighter, and are easier to build.
1) The Specific Septic System Type
There are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. The scope of this article does not allow for a comprehensive discussion of each system type and its associated size requirements. We are referring to traditional gravity-fed anaerobic septic systems in this context when we say “system type.” The anaerobic septic system is the most prevalent type of septic system, and it is the one that most people think of when they imagine a septic tank.
- The following systems are available: conventional, gravity-fed, anaerobic systems
- Above-ground septic systems
- Pressure systems
- Anaerobic systems
- Mound systems
- Recirculating sand or gravel filters systems
- Bottomless sand filters systems
If your septic tank system is anything other than a traditional, anaerobic system, the instructions in this page may not be applicable in their entirety to your situation.
2) Local Government Regulations
The laws for septic tanks imposed by local governments vary greatly across the United States. In part, this is due to the significantly diverse soil geography and water features that exist from state to state and can even differ by a few miles in some cases. In order to determine the appropriate septic tank size and the best position on the land for installation, it is essential to consult with local government rules first. Take, for example, theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health, which provides a comprehensive informational overview of codes, rules, and regulations frequently promulgated by governing bodies, as well as common terminology and definitions in the industry.
3) Suitability of the Ground Geology
The subterranean soil type has a significant impact on the efficacy of the system and, consequently, the size of the septic tank. This topic is highly tied to the rules of the local government. In most cases, it is related to the standards and recommendations of a designated authority that regulates septic tank installations, which is typically the department of health. In order to determine whether or not the ground is suitable for a septic tank system, a trained specialist must come out to the prospective installation site and conduct a series of tests.
A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in an appropriate manner.
Whether you are hiring an experienced professional or doing it yourself, it is your obligation to contact your local oversight agency and arrange for perc tests and/or ground area evaluations to be performed.
4) The Expected Volume of Wastewater
A significant factor influencing system efficacy and, thus, septic tank capacity is the subterranean soil type used. In this case, local government rules have a significant role. In most cases, it is related to the standards and recommendations of a designated authority that regulates septic tank installations, which is usually the department of health. It is necessary to have a trained specialist come out to the potential installation place to undertake specific tests in order to determine whether or not the ground is acceptable for the construction of a septic tank system.
A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in a safe and effective manner.
Whether you are hiring an experienced professional or doing it yourself, it is your obligation to contact your local oversight agency and arrange for perc tests and/or ground area evaluations.
Minimum Septic Tank Capacity Table
The subsurface soil type has an important impact in the efficacy of the system and, consequently, the size of the septic tank. This topic has a strong connection to local government legislation. It is connected to the regulations and recommendations of a specified authority that regulates septic tank installations, which is often the department of health. To determine whether or not the ground is suitable for a septic tank system, a trained specialist must come out to the proposed installation site and conduct a series of tests.
A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in a safe and efficient manner.
Unless you are an experienced professional, you will be responsible for contacting your local oversight agency and arranging for perc tests and/or ground area evaluations.
The findings of the analysis and testing will determine whether or not the chosen site is suitable and whether or not a certain septic tank system or size will be required.
|Number of Bedrooms||Minimum Septic Tank Size||Minimum Liquid Surface Area||Drainfield Size|
|2 or less||1000 – 1500 Gallons||27 Sq. Ft.||800 – 2500 Sq. Ft.|
|3||1000 – 2000 Gallons||27 Sq. Ft.||1000 – 2880 Sq. Ft.|
|4||1250 – 2500 Gallons||34 Sq. Ft.||1200 – 3200 Sq. Ft.|
|5||1500 – 3000 Gallons||40 Sq. Ft.||1600 – 3400 Sq. Ft.|
|6||1750 – 3500 Gallons||47 Sq. Ft.||2000 – 3800 Sq. Ft.|
Take note of the following in relation to the table above:
- The following should be taken into consideration with respect to the table above:
Additional Thought: Can a Septic Tank Be Too Big?
In the absence of consideration for cost, it is reasonable to ask: “Can a septic tank be too large?” The answer is a resounding nay. As long as the septic tank is placed appropriately, it is impossible for a septic tank to be too large; the only thing that can happen is that it is too little. According to the majority of suggestions, constructing a larger-capacity septic tank is frequently the safer and more preferable solution. The following are the reasons behind this:
- In the absence of consideration for cost, it is reasonable to wonder: “Can a septic tank be too large?” No, that is not the case. It is possible to have a septic tank that is too large, but this is only possible if the tank is placed appropriately. When it comes to septic tank installation, the majority of experts agree that establishing a bigger tank is the safest and more preferable alternative. This is due to a variety of factors, including:
Takeaways | What Size Septic Tank Do I Need
The septic tank size recommendations offered here are merely that: suggestions. They are built on a foundation of information gathered from government and academic sources. The actual size of the septic tank you require will vary depending on the factors discussed in this article. There is no “one-size-fits-all” solution when it comes to determining the appropriate septic tank size for your property. There is a great deal of variation depending on where you reside. With addition to providing a basic insight into the septic tank and system size that may be most suited to your application, the providedMinimum Septic Tank Capacity Tablecan also assist in cost estimations.
Before beginning any septic tank installation project, check and double-check with the state, city, or local county’s agency that is in charge of septic tanks, soil testing, and permissions.
If you’re searching for a chart of tank sizes, have a look at our page on the many sizes and quantities of septic tanks available.
They are available in both single chamber and double chamber designs.
How to Care for Your Septic System
Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:
- Inspect and pump your drainfield on a regular basis
- Conserve water
- Dispose of waste properly
- And keep your drainfield in good condition.
Inspect and Pump Frequently
Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.
- The size of the household
- The total amount of wastewater produced
- The amount of solids present in wastewater
- The size of the septic tank
Service provider coming? Here is what you need to know.
When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.
In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.
If additional repairs are recommended, contact a repair professional as soon as possible. An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.
Use Water Efficiently
In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.
- Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
- Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.
Properly Dispose of Waste
Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.
Toilets aren’t trash cans!
Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:
- Cooking grease or oil
- Wipes that are not flushable, such as baby wipes or other wet wipes
- Photographic solutions
- Feminine hygiene items Condoms
- Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners
Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.
Think at the sink!
Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:
- If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
- Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.
Own a recreational vehicle (RV), boat or mobile home?
If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.
- The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.
Maintain Your Drainfield
It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:
- Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.