Alternative Treatment Technologies (ATT) are decentralized wastewater treatment components that provide advance wastewater treatment. They often supplement a septic tank and an absorption facility, such as a conventional drainfield or bottomless sand filter, and typically have an aerobic wastewater treatment element.
- Septic tanks work by allowing waste to separate into three layers: solids, effluent and scum (see illustration above). The solids settle to the bottom, where microorganisms decompose them. The scum, composed of waste that’s lighter than water, floats on top.
How does a traditional septic tank work?
Septic tanks work by allowing waste to separate into three layers: solids, effluent and scum (see illustration above). The solids settle to the bottom, where microorganisms decompose them. The middle layer of effluent exits the tank and travels through underground perforated pipes into the drainage field.
What is an AdvanTex septic system?
The Advantex AX20 unit is a synthetic filter fabric unit which provides supplemental treatment of effluent from the septic tank. The supplemental treatment system provides additional removal of pollutants such as organics, suspended solids, oil and grease, and nitrogen before effluent disposal.
What is a pretreatment septic system?
Pretreatment components remove many of the contaminants from the wastewater to prepare the effluent for final treatment and dispersal into the environment. The level of treatment is selected to match the receiving environment and the intended use.
How much is a sand filter septic system?
A sand filter septic system costs between $6,000 and $10,000 to install on average. The sand filter system is like a conventional septic system, but it uses a pump to distribute the effluent to a filter system—sand housed in either a concrete or a PVC-lined box—a grid of small pipes.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How often should you pump your septic tank?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
What does it mean if your septic alarm goes off?
It means you have a dangerously high water level or the level is too low. Your septic tank system alarm should have a timer on it. This timer dictates when the pump starts to flow wastewater through your drain field. However, if the system is damaged, then the timer won’t be able to work properly.
What is an anaerobic septic system?
Anaerobic septic systems involve the use of bacteria that don’t require oxygen to live. In an anaerobic system, you’ve got a septic tank with two main pipes. Inside the septic tank, solid waste settles and is eaten by the anaerobic bacteria. Liquid waste floats to the top.
Do all septic tanks have filters?
First, not all septic tanks have a filter, especially the older septic tanks. Now many government agencies require or recommend a filter when a septic tank is installed. Cleaning a septic tank filter is different than pumping out a septic tank and cleaning it.
What are the 3 types of septic systems?
Types of Septic Systems
- Septic Tank.
- Conventional System.
- Chamber System.
- Drip Distribution System.
- Aerobic Treatment Unit.
- Mound Systems.
- Recirculating Sand Filter System.
- Evapotranspiration System.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
Can heavy rain cause a septic backup?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
What is the life expectancy of a septic system?
Age of the System It’s pretty common for a septic system to last 40 years or longer, which means if you buy a new home, you might never need to replace it. However, you might have an older home whose septic system has been in place for nearly half a century.
What is the cheapest septic system?
Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
Advanced Treatment Technology (ATT)
It is critical to keep your onsite septic system in good working order. Having the understanding of what you can do to care for your onsite septic system, when the system requires attention, and when you are due for service is essential to maintaining a good onsite wastewater system. Alternative Septic Systems (Treatment Level 12) are available in a variety of sizes and designs. In most situations, the size of the Septic tank(s) and dispersal area on a residential system is determined by the number of bedrooms in the residence.
Depending on the Alternative Treatment Technology (ATT) Septic System (including capfill systems), trench depths can range from 10 inches to 24 inches.
This stated, in certain circumstances the laterals trench bottom may be deeper than 24″ since the ATT system was not used because of the soil types or other factors, but rather because of a lack of room to build a complete standard system in the first place.
Low pressure distribution trenches (also known as shallow trenches) and standard trenches are two types of absorption systems.
On standard trenches, dispersal types include equal distribution via pump feed (from the tank to the distribution box to the laterals), equal distribution via pump feed from the tank(s) to a hydro-splitter that feeds the laterals equally via gravity, and serial distribution via pump feed (which is Pumped from the tank(s) to the first drop box and then gravity takes over to feed the laterals.
In addition to re-directing surface water runoff, ground water interceptors can also assist in re-directing the circulation of water underground in the absorption facility region.
In addition, the discharge point must be located on top of a rip-wrap (to avoid erosion from the water flow being re-directed by the G.W.I).
How much does it cost to install an ATT septic system?
What is the approximate cost of installing an ATT septic system? What is an ATT septic system, and how does it work? Advanced wastewater treatment is provided by Alternative Treatment Technologies (ATTs), which are decentralized components of wastewater treatment that enable advanced wastewater treatment. A septic tank and an absorption facility, such as a traditional drainfield or a bottomless sand filter, are frequently used in conjunction with them. They generally include an aerobic wastewater treatment element.
An typical 4 bedroom home will cost between $15,000 and $20,000 to supply and install a Septic System with a Sand Filter, depending on the size of the residence.
Costs that will continue to accrue: There are no continuing service agreements in place.
In the context of septic systems, alternative septic systems are systems that are distinct from the more often used standard style septic system.
Alternative techniques necessitate the use of less soil. In other words, the drainfields are smaller, and the distances between them and the water table and soil limits are shorter than before.
How much does it cost to install an ATT septic system? – Related Questions
Sizes of Septic Tanks and Their PricesTank Gallon Size House Size Tank Price750 2 separate sleeping quarters The range is $700 – $1,200,000. 3 – 4 bedrooms are available. $900 – $1,500,200 (USD) 5 to 6 bedrooms are available. $1,200 – $1,600,000 $1,600,000 6 – 7 bedrooms or a compact duplex are recommended. $1,500 – $2,5004 in additional rows
How much does a septic system cost in Oregon?
A septic tank installation in Oregon is estimated to cost around $5,336. Depending on the size of your property, the cost of installing a septic tank system might range from $1,500 to more than $4,000. Septic systems are similar in size to tiny waste treatment facilities.
What is a sand filter septic system?
A sand filter septic system is an excellent choice for wastewater treatment difficulties in regions where there is inadequate soil, such as urban and rural settings. Septic system businesses fill up the region with sand to compensate for a shortage of soil, which is frequently accomplished by filling a big concrete box with sand. A layer of gravel is placed on top of the sand, and a number of tiny pipes are inserted into the gravel.
What is the best septic system to install?
A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass. Because of this, concrete septic tanks are required in a large number of cities and municipalities.
Which is better concrete or plastic septic tank?
Cement septic tanks outlast plastic tanks in terms of durability and, if maintained properly, may survive for a lengthy period of time. A cement septic tank may endure for up to 40 years if it is properly maintained and is drained on a regular basis. Environmental changes like as tree roots or shifting soil conditions are not a problem for cement septic tanks.
How long does an aerobic septic system last?
Longevity. Generally speaking, a septic tank that has been properly constructed and maintained can endure for up to 40 years. The regular cleaning and examination of your septic tank will ensure that your aerobic system continues to perform for many years to come.
What is the alternative to a septic tank?
In situations when the soil surrounding your house or structure is too dense or too shallow, or when the water table is too high, mound systems are a good option to septic tanks to consider. Mound systems are a popular alternative to traditional systems, despite the fact that they are more expensive and require more care.
How do you build on land that doesn’t perk?
When a piece of land will not perk, a mound system is frequently the first option considered as a replacement. Mound Systems are a type of mound system. Septic Systems that are aerobic in nature. Cesspool systems are a type of cesspool. Filter made of sand. Wetlands that have been constructed. Drip irrigation is a type of irrigation that uses water to irrigate the soil.
How big are septic tanks usually?
Septic tanks are typically 4.5 feet wide, 8.0 feet long, and 6 feet tall, depending on the manufacturer. Local site characteristics, form, slope, and other variables influence how deep tanks are sunk. Tanks are commonly buried 4 inches to 4 feet deep. Here is the fundamental arithmetic for calculating the capacity (volume) of a septic tank in gallons.
Is vinegar bad for a septic system?
In contrast to popular belief, baking soda and other basic home remedies such as vinegar are not detrimental to your septic system.
Chemcials that are harsh on the environment, such as bleach and ammonia, might harm the beneficial microorganisms in your sewage tank and should not be used in septic tank treatment.
How big of a septic tank do I need for a 4 bedroom house?
In what size of a septic tank do I need to invest?
What is the smallest septic tank you can buy?
Tank Capacity and Dimensions
How long does a leach field last?
a period of fifty years When maintained properly, a leach field can survive for 50 years or longer under typical circumstances. The durability and dependability of concrete septic tanks are unmatched, yet they are not invincible.
How do you rejuvenate a leach field?
Sewer lines, drains, and the leach field are cleaned and unclogged using a high-pressure water spray applied by trained professionals. As soon as the pipes are clear of sludge and other material that has accumulated and caused obstructions, the septic system will be able to rejuvenate and function properly again.
Can you install your own septic system in Oregon?
Professionals use a high-pressure water spray to clean and unclog your sewage lines, drains, and leach field, as well as other plumbing fixtures. The septic system will be able to revitalize itself once the pipes have been cleared of sludge and other material that has caused the obstructions.
How much does it cost to install a sand filter septic system?
In most cases, the cost of an installed sand filter septic system is between $6,000 and $10,000. Sand filter systems work in the same way as traditional septic systems, except that they employ pumps to transfer effluent into a filter system—sand contained in either a concrete or PVC-lined box—that is made up of an interconnected grid of tiny pipes.
How long does a septic sand filter last?
More maintenance is required for sand filters than for a standard septic tank and drainfield system. Maintaining a maintenance contract is very advised. When the loading rate is significant (2 to 6 gal./sq. ft.), the sand must be replenished every 2–5 years, depending on the conditions.
How much does it cost to install an ATT septic system?
Onaverage You can expect to pay $4,000-$6,000 for a conventionalseptic system, $6,500-$8,500 for a conventionalseptic system that requires a pump, $10,000-$15,000 for an alternativeseptic system that requires pretreatment into conventional drainfield lines, and $20,000-$24,000 for an alternativeseptic system that requiresSeptic SystemAlternative, depending on the type of alternative you choose. Technological Approaches to Treatment. Septic systems are used to cleanse and distribute sewage in the soil for houses and businesses located outside of urban areas served by massive sewer systems.
- What’s more, how much does it cost to put in a septic system in the state of Oregon?
- Septic tank installation in Oregon is estimated to cost $5,336 on average.
- Depending on the size of the system and the materials used, the cost of construction might range from $1,500 to over $4,000 dollars.
- Rural regions, where municipal sewer access is not easily available, are the most popular locations for cesspools.
When Should You Use a Septic Tank? In Arkansas, it is mandatory for all residences located within 300 feet of a conventional sewage system that can acquire access to that sewer without crossing another person’s property to connect to that conventional sewer system, according to state law.
Choose A System
- Onaverage You can expect to pay $4,000-$6,000 for a conventionalseptic system, $6,500-$8,500 for a conventionalseptic system that requires a pump, $10,000-$15,000 for an alternativeseptic system that requires pretreatment into conventional drainfield lines, and $20,000-$24,000 for an alternativeseptic system that requiresSeptic SystemAlternative, depending on the type of system you choose. Techniques of Treatment. Septic systems are used to cleanse and distribute sewage into the soil for houses and businesses that are located outside of urban regions served by massive sewer networks. One of the most important components is an aseptic tank for collecting and treating waste, while the other is a drainfield for collecting, dispersing, and filtering the treated waste. What’s more, how much does it cost to put in a septic system in the State of Oregon? Installation of Septic Tanks at a Low Price in Oregon When you use SortFix to find a septic tank installation contractor in Oregon, you’ll know that you can expect to pay anywhere between $4,669 and $6,087 in total. A typical septic tank installation in Oregon will cost you around $5,336. What is the cost of installing a septic system, for example, can be something you’re curious in. Depending on the size of the system and the materials used, the cost of installation might range from $1,500 to over $4,000 dollars. Septic systems are similar in size to tiny waste treatment facilities. Rural locations, where municipal sewer access is not easily available, are the most popular location for cesspools. In Arkansas, is it legal for me to construct my own septic tank? In what situations should you use a septic tank Every residence within 300 feet of a conventional sewage system, which can acquire access to that sewer without crossing another person’s property, is obliged to connect to that conventional sewer system in the state of Arkansas.
Gravity Septic
Onaverage You can expect to pay $4,000-$6,000 for a conventionalseptic system, $6,500-$8,500 for a conventionalseptic system that requires a pump, $10,000-$15,000 for an alternativeseptic system that requires pretreatment into conventional drainfield lines, and $20,000-$24,000 for an alternativeseptic system thatSeptic SystemAlternative. Technological Approaches to Treatment Septic systems are used to clean and distribute sewage into the soil for houses and businesses located outside of urban areas served by massive sewer systems.
- Furthermore, what is the cost of installing a septic system in Oregon?
- In Oregon, the average cost of a septic tank installation is $5,336.
- The cost of installing a septic tank system can range from as low as $1,500 to as much as $4,000.
- In rural locations where public sewer connection is not easily available, they are the most popular type of septic system.
- When Should a Septic Tank Be Used?
Documents
- Affluent Filter Product Sheets: Residential Effluent Filter
- Commercial Effluent Filter Product Sheets
- External Filter Basin Product Sheets
- Drawing of a Tank with a Biotube Effluent Filter
- Effluent Filter Fact Sheets
Advanced Treatment Systems
Orenco’s AdvanTex ®Treatment Systems treat residential wastewater flows in an ecologically friendly and environmentally sustainable manner. Their versatility makes them an excellent choice for tough soils, small sites, system upgrades and repairs, new installations, as well as pretreatment, nitrogen reduction, and disinfection applications. One of the most significant advantages of AdvanTex is that it delivers consistent, dependable advanced treatment under real-world situations, rather than only in a controlled laboratory environment, which is one of its primary advantages.
The processed effluent is so clean that it can be reused for subsurface irrigation (where permitted by law) or released into shallow, unobtrusive trenches, depending on the situation.
AdvanTex AX20
AdvanTex AX20 Treatment Systems are extremely compact and take up very little room when installed. As an added bonus, certain jurisdictions let you to minimize the size of your drainfield area by using AdvanTex. As a result, AdvanTex is perfect for small sites or for homeowners who wish to make better use of their outside space. In comparison to other sophisticated treatment systems, AdvanTex Treatment Systems may be slightly more expensive up front. However, because of their low maintenance requirements, they end up costing far less in the long run.
Compared to alternative technologies, pumping expenses and equipment replacement costs are a fraction of the total cost of ownership. In addition, AdvanTex systems preserve your drainfield, as well as the public health and the ecosystem as a whole.
AdvanTex AX-RT
The AdvanTex AX-RT Wastewater Treatment System by Orenco is the most recent addition to the AdvanTex series of residential wastewater treatment systems. The AX-RT is a small wastewater treatment system that can be installed and used immediately. It can be placed as simply as a septic tank, and it may be built just behind a septic tank, allowing contractors to schedule multiple projects in a single day. This straightforward design is suitable for even the smallest lots and lowers expenses associated with excavation, installation, and operation and maintenance.
Orenco UV (Ultraviolet) Disinfection Unit
Household wastewater contains a diverse range of particles and organisms, including bacteria such as e. coli and viruses, amongst other things. In addition, in some areas, onsite wastewater treatment must be followed by ultraviolet (UV) disinfection to be considered effective. We created the Orenco UV Disinfection Unit to address this need. It has been shown to eliminate germs by 99.999 percent (5 logs)* and is simple to remove and disinfect. Furthermore, it is UL-certified in both the United States and Canada.
Our UV unit will have fantastic effluent coming into it as a result of the combination of AdvanTex, providing homeowners and property managers with a good kill rate for germs and viruses.
Documents
- Advertisement for AdvanTex AX20 Brochure
- Advertisement for AdvanTex AXRT Brochure AX20 with UV Disinfection Discharge Options
- Schematic illustration Performance Summary: General Reduction
- Performance Summary: Nutrient Reduction
- Performance Summary: General Reduction Product Sheets: UV and AXUV Product Sheets
- Tech Data Sheets: AXUV Disinfection Tech Data Sheets
- Product Specifications: UV and AXUV Product Specifications
Pumping Systems
Download the AdvanTex AX20 Brochure or the AdvanTex AXRT Brochure to learn more about these products. AX20 with UV Disinfection and Discharge Options; Schematic illustration. Reduction in general performance; Reduction in nutrient performance; Reduction in general performance; Product Sheets: UV and AXUV Product Sheets; Tech Data Sheets: AXUV Disinfection Tech Data Sheets; Product Information: UV and AXUV Product Information;
ProPak™ Pump Packages
ProPak Pump Package is intended for use in a single-tank system with one or two compartments, depending on the configuration. The elimination of the second tank allows treatment systems to be more compact and cost-effective. There are either one (simplex) or two (duplex) turbine effluent pumps in each pump vault as well as discharge assemblies, a Biotube filter cartridge, a float switch assembly, and an adjustable float stem bracket. In order to manage the pump as it doses incremental quantities of effluent from the tank, float switches or programmable timers are used.
EasyPak™ Pump Packages
In addition, Orenco’s EasyPak Pump Package is the first low-profile pump package particularly developed for use in a pump tank that is installed after a septic tank in the onsite industry. EasyPak was created to eliminate the need for improvised “pump on a block” setups by providing a comprehensive, ready-to-install, and simple-to-maintain kit. In some systems, large low-head pumps are perched dangerously atop an unscreened concrete block, putting them at risk of failure. This makes it nearly hard to provide service to them.
The likelihood of your drainfield failing is greatly increased as a result of this.
This configuration is simple to maintain and removes the possibility of sediments being pushed to the drainfield. It also enables for pumping all the way down to the bottom of the tank, if necessary.
Documents
- Product sheet for ProPak
- Design criteria for ProPak
- Technical data sheet for ProPak
- Product sheet for EasyPak
- Design criteria for EasyPak
- Technical data sheet for EasyPak
- Product sheet for ProPak
- Product sheet for EasyPak Pumps have a lot of power
- Tank with Effluent Pumping System, as seen in the drawing
A-Affordable Septic Service – Services
Product sheet for ProPak; design criteria for ProPak; technical data sheet for ProPak; product sheet for EasyPak; design criteria for EasyPak; technical data sheet for EasyPak; product sheet for ProPak; product sheet for EasyPak; product sheet for EasyPak; product sheet for ProPak; product sheet for EasyPak; product sheet for EasyPak; product sheet for EasyPak; product sheet for EasyPak; product sheet for EasyPak; product sheet for EasyPak Diagram of High-Head Pumps Tank with Effluent Pumping System, as seen on the drawing
Septic Tank Maintenance
Among rural residents, the septic tank-soil absorption system is the most often encountered wastewater treatment method. The septic tank is responsible for removing particles from wastewater, while the soil absorption field (drain field) is responsible for filtering, treating, and disposing of the septic tank effluent. The removal of particles from wastewater helps to keep the drain field from becoming clogged and failing prematurely. The septic tank also serves as a storage facility for settled solids and as a biological digestion facility for part of these materials.
How Does a Septic Tank Work?
- By collecting wastewater in the tank and allowing particles to settle and scum to rise to the surface, the septic tank eliminates solids from a home’s drainage system. In order to improve settling, it is recommended that incoming water be retained in the tank for at least 24 hours. Up to 50% of the solids will disintegrate into liquids and gases during the process. All of the leftover particles collect in the tank, and no biological or chemical additions are required to help or speed the settling or decomposition of the materials. The flushing of solids other than human waste and white toilet paper should be avoided as a general rule of thumb. With continued usage of the septic system, sludge continues to collect at the bottom of the septic tank’s tank. Tanks that have been properly designed have enough capacity to last for three to eight years before they need to be serviced. Every year, beginning with the third year, the tank should be examined to assess how much sludge is there. Because both the entrance and the exit are located at the top of the tank, it is critical to remember that septic tanks always seem to be completely filled. Identifying how much of the tank’s volume is being consumed by solids, scum, and sludge is essential for the homeowner. When solids, such as sludge and scum, account for more than 35 percent of the tank’s capacity, the tank must be pumped to remove the solids.
Servicing a Septic Tank
Too much sludge and scum is allowed to collect in the septic tank, and the incoming sewage does not have enough time to settle the solids before it enters the sewer system. A buildup of solids in the drainfield can cause it to clog, which can result in sewage overflowing to the ground surface, where it can expose humans and animals to the disease-causing organisms present in sewage. It is critical to inspect the tank and get it maintained as needed in order to avoid this from occurring. When a full tank is not pumped, it is possible that the drainfield will not fail quickly.
- This leads to inefficiencies in the drainfield and the possibility of groundwater pollution as a result.
- The frequency with which the tank is pumped is determined by the size of the tank as well as what and how much is flushed down your drains.
- The state of Oregon requires a 1,000-gallon septic tank to be installed for residences with up to four bedrooms.
- A system that serves a household of two would require pumping every six years if the identical system served a family of four.
Cleaning the Tank
- The Department of Environmental Quality (DEQ) licenses septic tank pumpers who are able to properly pump and clean your tank. If possible, have someone else supervise the cleaning in order to guarantee that it is done correctly. Known as “septage,” the material that is pumped out of the tank must first be broken up, and then mixed up to dissolve the sludge layers that have formed on the surface of the liquid section of the tank in order to remove the whole amount of material. This is commonly accomplished by pumping liquid from the tank and injecting it back into the tank’s bottom. The septic tank should be drained out through the huge central service hole, not the sanitary tee or baffle inspection ports, according to the manufacturer’s instructions. Tanks that are pumped out through the inspection ports may suffer structural damage. Before shutting the tank, inspect the tees and baffles to ensure they are in good working order. If they are missing or in poor condition, sanitary tees should be used in their stead. Never go into a septic tank unless absolutely necessary. Replacement of baffles or repair of the tank should be carried out from the exterior of the tank. When working on a septic tank from the outside, ensure sure the location is adequately aired and that someone is nearby to supervise you. Septic tanks emit deadly fumes that may kill a person in minutes. Never enter a septic tank to rescue someone who has been overtaken by poisonous fumes or a lack of oxygen unless you are using a self-contained breathing device to protect yourself. It is best to call for emergency service and to place a fan on top of the tank to allow fresh air to circulate. To make cleaning and inspection easier, install a watertight riser and a gasketed cover from the central service hole at least one inch above the surface prior to burying the tank
- This will allow for easier cleaning and inspection. It is not necessary to bury the riser cover.
How to Get Further Information
The Department of Environmental Quality (DEQ) licenses septic tank pumpers who are able to pump out and clean your tank. It is a good idea to supervise the cleaning in order to guarantee that it is completed correctly. Known as “septage,” the material that is pumped out of the tank must first be broken up, and then mixed up to dissolve the sludge layers that have formed on the surface of the liquid section of the tank in order to remove the whole volume of material. This is often accomplished by pumping liquid from the tank and injecting it back into the tank’s bottom.
- A tank might be damaged if it is pumped out through the inspection ports.
- Tees for hygienic purposes should be substituted if they are missing or in poor condition.
- Replacement of baffles or repair of the tank should be carried out from the outside of the tank enclosure.
- Septic tanks emit deadly fumes that may kill a person in minutes.
In the event that someone falls into a septic tank, the best course of action is to call for emergency service and place a fan at the top of the tank to blow in fresh air; to facilitate cleaning and inspection, install a watertight riser and a gasketed cover from the central service hole at least one inch above the surface before burying the tank; The riser cover should not be buried.
SEPTIC DRAIN FILL DAMAGE BY AT&T NEEDS TO BE FIXED RIGHT AWAY.
AT T has caused damage to the septic drain fill, which has to be repaired as soon as possible. On the 12th of April, a representative from AT&T came out to run a cable in my yard. He did not adhere to the orange paint lines that a prior AT&T technician had made for him to follow when he was tasked with placing the cable. The wire was trespered into my septic pipe drain fill, and he damaged the pipes with a large tractor and blade, which he used to dig the hole. AT T stated that they will take care of the claim, however when the claim reached the AT T sedgwick claims department, the claim was refused.
- We are unable to use the water or the toilet in the house since the water is backed up in the broken pipes.
- A septic firm assessed the damage and prepared a damage estimate, which I submitted to Sedgwick Claims for consideration.
- Her tone was really condescending as she instructed me to dig up the septic drainfill.
- We are in a serious position here due to a faulty drainfill, and I would appreciate it if someone from AT T could get back to me soon enough.
- Thank you very much.
MicroFAST® Wastewater Treatment Systems • BioMicrobics Inc.
Traditional systems are significantly outperformed by BioMicrobics FAST® systems in terms of nitrification and denitrification performance, and they are capable of meeting or exceeding typical effluent requirements for wastewater recycling opportunities or reducing the size of the leach field while causing less aesthetic disturbance to the property value or system components. With their adaptability and consistent high performance, the FAST® systems are extremely popular aboard maritime vessels and offshore installations of various sizes and types, where they create high-quality effluent that is specifically intended for severe situations.
How it Installs
The use of MicroFAST® Systems provides a solution to the majority of onsite wastewater treatment concerns. The MicroFAST system has a compact footprint and is designed to be fitted into a regular septic tank, requiring no additional room to be installed. Naturally, the MicroFAST® provides better levels of nitrogen removal (NSF/ANSI 245) than other methods. Intermittent use of the blower, enabled by the SFR® technology, can save power consumption by up to 45 percent while simultaneously improving nitrogen performance (in specific situations).
Finding the Right Size
Checking what local requirements are necessary in the event that further information is requested is highly advised. MicroFAST® is available in a variety of sizes.
| Unit Size | People | Volume/Module |
| MicroFAST® 0.5 | 1 to 8people | 500 GPD(1800 LPD) |
| MicroFAST® 0.625 | 1 to 10people | 625 GPD(2400 LPD) |
| MicroFAST® 0.75 | 1 to 11 people | 750 GPD(2800 LPD) |
| MicroFAST® 0.9 | 1 to 14people | 900 GPD(3400 LPD) |
| MicroFAST® 1.5 | 6 to 21people | 1500 GPD(5600 LPD) |
| MicroFAST® 3.0 | 10 to 42people | 3000 GPD(11400 LPD) |
| MicroFAST® 4.5 | 18 to 63people | 4500 GPD(17000 LPD) |
| MicroFAST® 9.0 | 30 to 126people | 9000 GPD (34050 LPD) |
