- Another way to figure out how to locate your septic tank opening is by searching for a vent. Some septic tanks have small pipes that come out of the ground to help vent the septic system. Look for Concealment Systems These pipes can be concealed by things like ornamental rocks or shrubbery, but they can tell you for sure where the septic tank is.
How far down is septic tank lid?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
How do you find a buried septic tank?
Tips for locating your septic tank
- If the septic tank lid is underground, you can use a metal detector to locate it.
- You can use a flushable transmitter that is flushed in the toilet and then the transmitter is tracked with a receiver.
How do you test a septic drain field?
In order to test the overall health and liquid capacity for your leach field, it is necessary to perform a hydraulic load test. This is done by running water at a certain rate over an allotted period of time. A failure occurs when water back-drains to the source before that allotted time period is up.
How far down is a leach field?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
How do I know if my leach field is failing?
The following are a few common signs of leach field failure: Grass over leach field is greener than the rest of the yard. The surrounding area is wet, mushy, or even has standing water. Sewage odors around drains, tank, or leach field.
Will metal detector find septic tank?
If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.
How do you tell if your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How deep is a septic tank in the ground?
Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.
How do I find out where my septic line is?
Scan the area for markers: The location of your septic tank should be marked by a cement marker the size of a manhole cover. Look for it 10 to 20 feet away from your home. Once you locate the tank, follow the downward-most path and check for an empty downward-sloping field. You may have just found your drain field.
What happens if septic tank not pumped?
What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.
How do I find my septic lateral lines?
Call your local electric utility provider or gas company to locate buried gas or utility lines before digging. A septic tank probe can also help you find the location. Stick the long, thin metal probe into the ground until you feel it hit the tank and feel the edges of the tank.
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
How to Find Your Septic Tank Lid
Previous PostNext PostWhether you realize it or not, it is critical that you be aware of the position of your septic tank lid and the septic tank itself. Despite the fact that septic tanks are fairly huge, they can be difficult to identify, particularly if they have not been properly maintained over time. Continue reading to find out how to locate your septic tank lid.
Why It’s Good to Know Where to Find Your Septic Tank Lid
Knowing the location of your septic tank is a fantastic approach to spot septic tank problems as soon as they occur. Consider the following scenario: If you saw water near your septic tank lid, you would know right away that you could have a problem with your system being overloaded with waste. Furthermore, by understanding where your septic tank is located, you may avoid parking cars on top of it, which might cause the tank to collapse and create flooding. You’ll also be able to point service personnel in the right direction for septic tank services, which will eventually save them time and money while also saving you money.
How to Find Your Septic Tank Opening
Knowing how critical it is to know where your septic tank lid is located, it’s time to go out and find one for yourself. Keep an eye out for a circular lid that is roughly two feet in diameter during your quest. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete. It is not always simple to locate the septic tank lid, however, because untidy vegetation, mud, or debris might obscure the lid’s location. If you live in a snowy climate, seek for a spot of lawn where the snow melts more quickly than it does anywhere else on the property.
How to Find Your Septic Tank Lid as a New Homeowner
During the process of purchasing your house, you should have been provided with a map of your property that showed the location of your septic tank. This is normally included as a part of your home inspection service package. All you have to do from there is compare the diagram to your land, find the septic tank location, and potentially dig around it to check whether the lid has been hidden by vegetation or other obstructions.
People have been known to place an object such as a huge rock on top of the septic lid, so be sure to look beneath landscaping stones as well.
How to Find Your Septic Tank Lid as an Existing Homeowner
Still having trouble locating your septic tank lid? There’s a significant probability it’ll end up in the ground. The pipes coming from your basement should be followed, as they will take you in the direction of your septic system, which is what we propose. Then, once you’ve determined the correct direction, check for any high or low points in the yard that might reveal the location of your septic tank. You can find the lid of your septic tank by probing the ground with a metal probe every few feet with the probe.
Because most lids have a metal handle or fastener on them to hold the lid closed, you may also use a metal detector to find them.
The majority of lids are buried up to a foot deep, but some lids might be buried as deep as four feet in extreme cases!
How to Maintain Your Septic Tank Lid
Following the discovery of your septic tank lid, keep it in good condition to avoid damage and ensure simple access for future septic tank maintenance, such as pumping your septic tank every three- to five-year period. Here are some pointers for keeping your septic tank lid in good working order:
- Keeping the grass around the septic tank lid regularly mowed is important. Remove any dirt or debris that may have accumulated on your septic tank lid
- Mark the area to ensure that no one parks or constructs structures there. It is possible to do this using a flag, garden décor, or ornamental pebbles.
Professional Septic Tank Services
Is it difficult to find trustworthy septic tank services or septic tank installation? If you are looking for septic tank installation, inspection, and cleaning services, check with your local Mr. Rooter ® Plumbing franchise. Mr. Rooter charges a set amount up front, with no overtime fees or additional expenses. To get started, call us at (855) 982-2028 or fill out our online estimate request form. Is the lid of your septic tank obscured by grass? Inquire with The Grounds Guys about routine lawn care and upkeep.
Rooter, is a member of Neighborly’s network of dependable home service experts, which includes Mr.
By hiring The Grounds Guys to provide trustworthy grass mowing and landscape care services, you can be assured that your septic tank lid will always be simple to locate.
Procedure for Opening Septic Tanks
- ASK a question or make a comment about how to open a septic tank safely and properly for inspection or cleaning.
InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Instructions on how to open the septic tank. The location of the septic tank cleanout or cover, as well as the access and opening processes. We discuss some of the things to look for before opening the septic tank, such as subsidence, indications of recent work, and septic tank coverings that are not suitable to use. Then we demonstrate how to remove the septic tank lid or the access port cover from the tank.
For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page. Use the SEARCH BOX to discover the information you’re looking for quickly.
Procedures for Safe Opening of a Septic Tank, Cesspool, or Drywall for Inspection or Cleaning
The following are the contents of the article:
- How to remove the lid from a septic tank
- When it comes to pumping out the septic tank, which septic tank entrance should be used? Why
In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.
- There is a risk of dangerous, perhaps deadly collapse due to subsidence (depressions or low regions in the earth) near the location of the septic tank. Evidence of recent construction activity that may necessitate further investigation in order to determine the status of the septic system
- Backup or effluent breakout at the surface of the ground in the septic tank region.
- Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been piled by the owner to serve as an access well to his septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a serious collapse risk that may have resulted in a deadly hazard. We covered the area with plywood and roped it off, and we quickly informed the residents and the property owner of the situation, both verbally and in writing
Procedure for Opening the Septic Tank Pumping Access Port
Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been placed by the owner to serve as an access well for their septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a hazardous collapse risk that may have resulted in a fatality. When we arrived, we promptly covered the area with plywood and roped it off, and we informed the inhabitants and property owner of the situation in person as well as via written notice;
Reader CommentsQ A
@Ron, In order for a concrete septic tank lid to be correctly erected, it must feature both access openings and cast in iron loops to which a hoist may be attached. Alternatively, if your septic tank cover does not have those points of purchase for lifting, you will require a flat bar and a larger wrecking bar to pry up the excavated lid from the septic tank sufficiently to allow you to put a chain around the lid, most likely two Chainz, and lift the lid with a hoist and tripod mechanism or you will use an on-site motorized hoist.
- 1/2 x 27/4 removing the top of a septic tank @Phil, Although what you describe is theoretically doable, it may be less expensive and more rational to do so in a different way.
- This is due to the fact that just stitching a circular hole does not ensure that I am creating a hole through which the lid will not be dropped.
- Edge My concrete septic tank, which was constructed when the home was built in 1979 and does not have any manholes or openings for pumping out, is in poor condition.
- Is it feasible to cut two manholes using a concrete saw that are 20″/24″ in diameter and then build risers and a cover on top of them?
- Could you please share a picture of the tank top?
- It is common for the concrete top to be tapered; nevertheless, it may just be trapped by effloresent salts and filth.
- I have a feeling that simply tugging will not be effective.
This would have stopped leaks but would have made it extremely difficult to open the tank for the next person who needed to open the tank.
Repeat this process many times all around the cover’s perimeter.
For me, this has worked almost every time in the past.
It is recommended that you build a septic tank riser that is sealed to the tank top, as well as a new secure cover on top of the riser if your septic tank lid is not near to the ground level.
Never work on your own.
I’ve erected two wood 4x4s on top of the lifting ring to provide additional support.
All I’ve done three times is shattered those 4x4s.
Do you have any recommendations?
A septic tank pumping provider can remove plastic bags, tiny pebbles, and other debris from your tank, as well as the sediments, scum, and sludge that has accumulated there.
What is the best way to get them out?
When the septic tank is drained out, would it make sense to place a plastic bag over the top hole of the tank to keep the odors contained?
Gerard A plastic bag as a sewer line cap doesn’t seem right to me – it’s not durable, it’s the incorrect material if a cover is required, and if it’s a vent rather than an access pipe, the vent must be open to the atmosphere and protected from animal intrusion.
What is the function of this item?
A typical septic tank is equipped with clean out access covers that are strategically placed.
Maybe something as basic as a flat piece of concrete or stone will be sufficient, or maybe something more complex.
To be quite honest, I would have expected the contractor who dug the hole to be accountable for ensuring that the system was repaired and safe.
What should I do to solve it?
What store would I go to in order to acquire septic tank covers?
A few years ago, I had a brand new house built for me.
I have three plastic polylok lids, one of which is above ground and is for the pump.
I’d like to purchase risers so that I can build all three at a depth of approximately 6 inches below ground level.
What are the advantages and disadvantages.
Do you have any other suggestions?
I apologize for the lengthy post.
Sorry, but “True Bolt” isn’t a term I’m familiar with or associate with septic tank lids in any way.
Not necessarily, Mary as the pumper may be able to access all of the tank bottom from one opening; it depends on tank size and shape; but you might want both openings opened to check the condition of the tank baffles if your pumper can’t do that from one end.
My septic tank has two openings. Do both have to be opened for a pump out?
Question:cannot find the manhole cover of the septic tank
(8th of August, 2014) “We’ve located the cesspool concrete lid (about 12 foot diameter), but after digging a 2 foot perimeter, we were unable to locate the manhole cover, which was required for an inspection.” vicki levin stated Help? My husband is becoming increasingly upset with the digging!
Reply:
If it’s a cesspool, rather than a septic tank, and it’s spherical, the access lid is normally located in the center of the container.
Question: how do i remove septic tank lid that is stuck
The entrance lid would normally be in the center of the cesspool, if it is in fact a cesspool rather than a septic tank, and it is spherical.
Reply:
If it’s a cesspool rather than a septic tank, and it’s spherical, the access lid is often located in the center.
Septic Pumping ProcedurePumper Truck Operation Articles
- PROCEDURE FOR SEPTIC TANK INSPECTION
- MISTAKES MADE IN SEPTIC TANK PUMPING
- PROCEDURE FOR SEPTIC TANK PUMPING
- HOW TO CLEAN A SEPTIC TANK
- WHEN TO CLEAN A SEPTIC TANK
- WHEN NOT TO PUMP A SEPTIC TANK
- HOW TO FIND A SEPTIC TANK
- HOW TO OPEN A SEPTIC TANK
- INSPECT THE SEPTIC TANK BEFORE PUMPING
- SEPTIC TANK INSPECTION PROCEDURE
- SEPTIC TANK LEVELS OF SEWAGE
- PUMPER TRU
Suggested citation for this web page
HOW TO OPEN A SEPTIC TANK at Inspect a Tank An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.
Technical ReviewersReferences
Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.
5 Ways to Find Your Septic Tank
1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.
- 3.
- Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
- Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
- When you do, that’s when your septic tank comes into play!
- Look for the Lid.
- You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
- Those areas should be excavated in order to disclose the lids.
- Get in touch with the pros.
- Lifting concrete lids will necessitate the use of specialized equipment.
- A fall into an unprotected septic tank has the potential to be lethal.
- Produce your own diagram of your yard, which you may file away with your other important house paperwork.
That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!
Proper Access Opening for Septic Tank Pumping
Pumping of the septic tank must take place through the septic tank lid ports in order to be effective. The only method to completely remove all of the waste from the tank is to thoroughly agitate the tank, which will remove both the water and the solids that have accumulated inside the tank. This is done in order to eliminate anything and everything from the tank! If someone is pumping through a clean-out or inspection port, they are not conducting a full cleaning job, according to industry standards.
Pumping vs. Cleaning Your Septic Tank
The sale of a pumping service and a cleaning service is offered by several businesses. BE EXTREMELY CAREFUL. The pumping service will only remove water from the ground; no solids will be removed. The fact that many people feel they only require that servicing every few years makes this a terrible waste of money, and it really causes more harm to the system than good. When the solids compress and pour into the disposal field, it might result in the field failing or requiring very expensive repairs.
Only through the septic tank’s lid holes can a proper cleaning service be conducted, according to the manufacturer.
There is just one service that you will ever require: a complete pumping and cleaning service.
Priority Pumping’s septic tank pumping service will ALWAYS include the removal of all of the liquid and sediments that have accumulated inside the tank.
How Many Lids Does My Septic Tank Have?
Most of the time, these lids are situated beneath the surface of the earth, and excavation is necessary to discover and expose those lids. Some tanks will only have one lid opening, while others will have two or three. How do you know what you have in your tank? The answer to this question is based on the year in which your septic tank was installed. From 1960 to 1970, the coffin lid was the most common type of lid. This will need further excavation in order to move the lid and pump. 1970s through the 1990s*: These septic tanks are normally one-compartment tanks with a manhole in the center that is 18 inches in diameter.
Years 2000–present: These tanks MIGHT additionally include a filter in the back chamber that has to be cleaned.
What If My Septic Tank Has Risers?
Septic tank “risers” come in a variety of shapes and sizes. The correct risers from which we may pump are composed of a polymer or concrete, depending on the use. Their mounting will be done immediately on the lids of the septic tanks, which is a good idea. The green and tan lids seen in the illustration above correspond to the correct pumping ports on the device. Because we will have to excavate and expose the septic tank lids if you do not have these types of risers, we will be forced to pump your septic tank.
- We’re going to be as cautious as we possibly can.
- It is possible for Priority Pumping to assist you with installing septic tank risers if your tank does not presently include any, but you would want to have them installed in your septic tank during the pumping service.
- You may either indicate this while arranging your appointment, or you can always chat with our professionals when they arrive at your home to do your service if you have any questions.
- Do you still have questions about pumping your septic tank?
- Call or text our office at 602.601.5751 if you have any questions.
It is more than a pump job when you hire Priority Pumping as your contractor! We like educating our customers about their systems and assisting them in developing a good maintenance plan that will keep their systems happy and healthy for years to come.
How to Locate Your Septic Tank Lid
Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time. It is critical to be aware of the location of your septic tank lid and septic tank, whether or not you are aware of it. You must be aware of the location of your dishwasher, toilet, and sewage line in order to properly care for these appliances. Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time.
Continue reading to find out how to locate your septic tank lid.
Why It’s Important to Know Where Your Septic Tank Lid Is
Locating the location of your septic tank is a good first step in diagnosing septic tank problems as soon as they occur. Consider the following scenario: If you notice water near your septic tank lid, you’ll know right away that there might be an issue with your system being overloaded with waste. Aside from that, understanding the location of your septic tank allows you to prevent parking cars directly on top of it, which might cause the tank to collapse. You may also lead service experts to the appropriate location for septic tank services, saving them both time and money in the process.
How to Locate Your Septic Tank Opening
Knowing why it is so critical to know where your septic tank lid is located, you may begin the process of locating the lid. During your search, keep an eye out for a circular top that’s around two feet broad and roughly two feet in diameter. Septic tank lids are often constructed of green or black plastic, although they can also be built of concrete. It is not always simple to locate the septic tank lid, however, because grass, mud, and other debris might obscure the opening.
How to Locate Your Septic Tank as a New Homeowner
During the process of purchasing your house, you should have been provided with a schematic of your property that showed the location of your septic tank. Your home inspection will most likely include this service. Check the diagram against your home to see where your septic tank is located. You may need to dig around the tank to determine whether the lid has been hidden. Consider placing a large item, such as a boulder, on top of the septic lid to serve as a reminder of its location.
Septic Tank Maintenance
It is important to keep your septic tank lid in good condition in order to avoid damage and to make it easier to access for future cleaning and maintenance. Consider trimming the grass surrounding your tank lid on a regular basis, eliminating all dirt and trash, and marking the area so that you can easily identify where the tank lid is.
Get in Touch With B D Today!
Are you dealing with any plumbing issues that necessitate the intervention of a professional? Are you dealing with a plumbing problem that simply must be put off any longer? Inform B D Plumbing of the situation. Plumbing services are provided across the greater Washington, D.C. metropolitan region, including Maryland and Northern Virginia, by B D Plumbing Inc. Get in contact with us by dialing (301) 595-1141 or by following us on social media, which includes Facebook, Twitter, LinkedIn, and Pinterest (to name a few platforms).
As a small, family-owned business, we realize how important your house is to you—and we strive to provide great service that reflects that importance! This item was posted on Friday, April 17th, 2020 at and is filed under Uncategorized. Commenting and pinging are temporarily closed for this post.
How to Open a Septic Tank Lid
Find the location of the septic tank. The tank must be at least 10 feet away from the house foundation, according to most building rules. The location and direction of the drain as it exits the house should offer a good indication of the tank’s location and direction. For the purpose of locating the tank, it may be required to drill a number of test holes.
Step 2
Remove the dirt off the top of the tank using a shovel. The lid of the septic tank will be a square piece of concrete that will be installed at the center of the tank’s interior. Depending on the kind of tank you have, it will be around 18 inches square at the most. Remove the dirt from the lid’s edges as much as possible, and try to slant the sides of the hole to assist prevent dirt from moving and sliding down the sides of the hole. After you have removed all of the loose dirt, whisk away any leftover dirt.
Step 3
Make a small indentation with the screwdriver in the seam surrounding the lid. As soon as the seam begins to open slightly, insert one edge of the pry-bar into it and pry it upwards. Because the lid may be fairly heavy, you should have a companion nearby to assist you in removing it from the hole. Keep an eye out for any cracks or chips in the tank’s borders or the lid itself when doing this procedure. It is critical to have a tight, smooth seal between the lid and the tank when using this method.
Tip
In order to avoid accidentally back-filling the hole when the repairs are finished, make a note on it. It is best to indicate the placement of the tank lid with a tiny stepping stone that is flush with the surface of the ground. If you need to re-open the tank in the future, you will save time and effort by doing so now.
Warning
Never go into a septic tank or allow anybody else to get into one. Suffocation and death can occur quickly as a result of the gases and lack of oxygen.
How to Find a Septic Tank Lid
Septic tanks are installed on certain properties, and it is a good idea to be aware of where your tank is located. The first stage will be to locate the septic tank lid, whether it is to prevent damage to the tank and drain field from heavy equipment, to locate the tank for excavating reasons, or to conduct a self-inspection of the septic tank. We generally give this service to our customers while doing inspections or septic tank pumping, however we understand that some homeowners may prefer to discover it on their own.
Use the septic system plans if you have them.
The quickest and most straightforward method of locating a septic tank lid is to consult the original septic system drawings. The septic system drawings will include the position and dimensions of the tank in relation to the house. Simply measure the measurements of the septic tank lid using a measuring tape to determine where it is located. When it comes to septic system plans, it’s probable that your local board of health will have a copy if for some reason you don’t have access to them.
It is common for the lid to be buried beneath the grass, necessitating some probing and digging. However, if the previous owner placed an aseptic tank lid riser, the lid will be easy to locate and should be visible through the grass.
The sewer pipe can be your guide to finding the septic tank lid.
Sometimes it’s difficult to locate septic tanks when using these blueprints, or you may not have a copy of your septic plans on hand. The sewer pipe in your basement is your next best chance if you can’t locate it. This is the pipe that transports all of the waste water from your home to the sewer. Take note of the location of the pipe in relation to the ground level. this will give you an idea of how deep your tank will be buried under the earth. In addition, you will need to determine how many feet the pipe is away from the inner corner of your residence.
Make your way to the location where you believe the drain pipe is exiting the building.
Use caution when opening a septic tank lid.
Opening the septic cover is the first step in checking the levels of your septic tank on your own if you’ve managed to discover it. Sitting septic tank covers, particularly the older concrete ones, are extremely heavy and difficult to shift. The cover may feature hooks or grips that make it simpler to raise, or you may need to use a tool such as a shovel as a lever to open it. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to breaking.
A anyone falling into this tank, especially a child or a pet, would be in grave danger.
Because the exposed hole in the ground might be easily missed, never leave the open tank alone, even for a little moment of reflection.
Measure the Levels of Your Septic Tank Yourself
It is necessary to open the lid of your septic tank first if you have identified it in order to check the levels in your septic tank on your own. Sitting septic tank covers, particularly the earlier concrete models, are extremely heavy and difficult to shift. You may see hooks or handles on the cover that make it simpler to lift, or you may have to use a tool such as a shovel to act as a lever to open the container. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to cracking and breaking.
A person falling into this tank, especially a youngster or a pet, might be fatal due to the 4-5 feet of water that surrounds it.
The best course of action is to contact a professional septic service company to remove the lid, which will help to prevent unpleasant gases from escaping and the possibility of someone falling into the tank from increasing.
Need help? Call Grant Septic Tech.
We are well aware that doing things oneself is not always simple or straightforward. But that is precisely why we are here! Our family has been in the septic system business for more than 60 years, and we’ve seen just about everything. Alternatively, if you’ve had difficulties with any of these processes (or simply want to avoid the mess), simply give us a call – we know where to look for a septic tank lid and can complete a comprehensive check for $127. There will be no fee for the inspection if we discover that your septic tank requires pumping while we are there; you will only be responsible for the cost of the septic tank pumping while we are there.
We provide service in a wide range of places around Massachusetts.
How To Find Septic Tank Location: A Guide for Property Owners
The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.
Follow the Main Sewer Line
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.
Inspect Your Property
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.
- Paved surfaces
- Unique landscaping
- Your water well, if you have one
- And other features.
If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.
Check the Property Records
Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.
Most counties, on the other hand, keep records of septic tank installations for every address.
Don’t Try to Fix Septic Tank Issues Yourself
Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.
Schedule Septic Tank Maintenance
The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.
We are open seven days a week, twenty-four hours a day.
Frequently Asked Questions
A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home.
Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.
How do I know if I have a septic tank?
Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.
If you’re also using well water, it’s possible that you won’t receive one at all.
What do I do once I locate my septic tank?
Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.
This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.
Then contact The Original Plumber to have your septic system maintained on a regular basis.
All of the heavy lifting has been delegated to our team of professionals.
How to Locate Your Septic Tank
It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.
This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.
How To Find A Septic Tank: Step By Step
It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.
1. Gather Some Helpful Tools
Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.
Using this method, you may also locate the cover for your septic tank.
While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.
2. Use a Septic Tank Map
If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.
3. Start Ruling Areas Out
The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:
- Immediately adjacent to your well
- Beneath your home
- Directly against your home
- For example, underneath your driveway
- Under trees
- And other locations. Structures like a patio or deck are good examples of this.
4. Inspect Your Property
If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.
When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.
The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:
- Your water well, if you have one (for a variety of reasons that are rather clear)
- Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
- Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
- Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping
5. Inspect Your Yard
A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:
- If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
- Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.
The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.
6. Follow Your Sewer Main/Sewer Pipes
Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Once you’ve determined where these pipes exit your home, you can follow the pipe across your yard, using your metal soil probe every 2 feet or so, until you reach your septic tank. Additionally, every drain in your home leads to your sewer main, and your sewer main leads to your septic tank, which is located beneath your home.
If the line is not labeled, it is often made of metal and has a diameter of approximately four inches or so.
It is important to determine where this line exits your property and in which direction it is moving, as it often travels straight out to the septic tank itself.
7. Check Your Property Records
Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.
If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.
What to Do Once You Find Your Septic Tank
Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities.
You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!
