How Do The Latterol Lines In A Septic Tank? (TOP 5 Tips)

Septic tank lateral lines are also known as percolation pipes. These are the perforated pipes that extend from the outlet of the septic tank below ground into the soil. The purpose of these lateral lines is to provide a network of pipes that the effluent from the septic tank runs through.

• Lateral lines are part of the septic system. When the septic tank is done with treating the wastewater with anaerobic bacteria, the pre-treated effluent runs through the lateral lines. These lines are pipelines that distribute the pre-treated effluent into the drain field. The lateral lines have holes under them that make this possible.

How does a lateral line septic system work?

The lateral lines are long pieces of tubing, typically made of PVC, that are perforated with small holes. The lateral lines normally have a layer of gravel between them and the native soil below. The liquid from the septic system runs through these lateral lines and seeps out through the small holes.

Can lateral lines get clogged?

If you happen to experience this misfortune, you’ll want to clear the clog in the sewer lateral and clean the sewer line as quickly as possible. Not all clogs are created equally however, and you need to know which course of action to take to remedy your particular situation.

How do you know if your lateral line is clogged?

Stay vigilant for five signs your drainfield does not drain correctly anymore.

1. Slowing Drainage. Homeowners first notice slower than usual drainage from all the sinks, tubs, and toilets in a home when they have a compromised drainfield.
2. Rising Water.
3. Increasing Plant Growth.
4. Returning Flow.
5. Developing Odors.

How deep are septic lateral lines?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

What does lateral lines look like?

Lateral lines are usually visible as faint lines of pores running lengthwise down each side, from the vicinity of the gill covers to the base of the tail. Most amphibian larvae and some fully aquatic adult amphibians possess mechanosensitive systems comparable to the lateral line.

How much does it cost to replace lateral lines?

FULL REPLACEMENT If you need to get part of the lateral replaced, you will pay between $50 and $200 per linear foot. If you need to get a small piece of the sewer lateral replaced, that will be between $3,000 and $6,000. For sections longer than 50 feet, the cost will be between $5,000 and $13,000.

How do you know if your septic field is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.

Can heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

What Are Septic Tank Lateral Lines and Percolation Areas

Septic tank lateral lines are also referred to as percolation pipelines in some circles. Perforated pipes that extend below ground from the septic tank’s outflow and into the soil are referred to as leach lines. The goal of these lateral lines is to create a network of pipes via which the effluent from the septic tank may be sent and collected. After passing through these pipes, the effluent seeps out of the perforations in the pipes and infiltrates into the soil. The effluent eventually infiltrates into the ground through the lateral lines or percolation pipes of the septic tank.

An Essential Part of a Standard Septic System

Percolation pipes are another name for lateral lines in a septic tank. In the case of a septic tank, these are the perforated pipes that extend below ground into the soil from the tank’s outlet. Essentially, the goal of these lateral lines is to create a network of pipes through which the effluent from the septic tank may flow. After passing through these pipes, the effluent seeps out of the holes in the pipes and infiltrates into the ground. As a result, the septic tank lateral lines or percolation pipelines serve as the final disposal location, where wastewater infiltrates into the earth.

UK 2020 Septic Tank Guidelines

Beginning in 2020, every basic septic tank system in the United Kingdom will be required to have septic tank lateral lines or a percolation area constructed. Stream and watercourse discharges will not be authorized directly into the environment. In order to comply with the regulations between now and 2020, everyone who has a septic tank that discharges directly into a stream or watercourse is required to create a soakaway or percolation area. A percolation area or soakaway following a septic tank installation in an existing landscape is not usually straightforward.

Installing a household sewage treatment system might be a viable alternative approach.

Compared to the installation of a huge percolation area, it is significantly more cost-effective to replace a septic tank with a sewage treatment plant instead.

When purchasing a sewage treatment plant, it is important to search for exceptional value in conjunction with a system that is certified to EN12566-3 specifications.

How to Install Lateral Lines Correctly

It is recommended that you get professional assistance when constructing your percolation area or lateral line configuration. The effluent ponding on the ground surface might be caused by a poorly built percolation region that is not functioning properly.

Consequently, before you begin any work, consult with a professional, arrange for a site study, and then make certain that the septic tank installation you hire is skilled and adequately insured. The number of lateral lines placed is a function of the amount of space available.

• It is recommended that you consult with an expert when constructing your percolation area or lateral line configuration. Inadequate design of the percolation area might result in effluent ponding on the ground surface and poor performance. In order to avoid making a costly mistake, consult with an expert, have a site study completed, and then choose an experienced and properly insured septic tank installer. Depending on the situation, the number of lateral lines placed will vary.

How to Install a System Without Septic Tank Lateral Lines

Due to the fact that septic tank effluent is not treated to a high level of quality, lateral lines for septic tanks are typically necessary. A standard septic tank has a treatment level of roughly 30%, which is not very effective. A contemporary sewage treatment plant or aerobic sewage system, according to the contract, has a treatment efficiency of 95 percent or more. Systems such as the Biocell QuickOne achieve an even higher treatment level of 98 percent, resulting in effluent that is clean and transparent.

In other words, while an advanced sewage treatment system is more expensive than a standard septic tank, you save a significant amount of money by not having to add lateral connections.

How to Clean Septic Tank Lateral Lines

Septic tanks allow residents to flush their wastewater without having to join to a citywide sewage system, which is beneficial in some cases. At any one moment, the majority of the wastewater is contained in two tanks. They use a natural settling mechanism to separate the solid waste from the water it is being used to clean. Long, horizontal and perforated pipes, known as lateral lines, are used to discharge the residual water into a drain field, which is a waste water treatment facility. Cleaning Septic Tank Lateral Lines: A Step-by-Step Guide Image courtesy of MemorioImage/iStock/Getty Images.

Lateral Lines in a Septic System

The lateral lines of a septic system allow the effluent water to trickle into an area that has been particularly constructed to filter and clean the water before it is released back into the groundwater supply. It is unlikely that the septic tank would suffer any difficulties with water outflow when the lateral lines, also known as field lines or leach lines, are correctly installed and operating. In some cases, however, sludge and paper products that are generally contained within the tanks might make their way into the lateral lines and cause drainage difficulties.

How to Clean Septic Tank Laterals

After passing through the primary line, the effluent water trickles into a secondary line that is particularly intended to filter and clean the water before it is released back into the environment. It is unlikely that the septic tank will suffer any difficulties with water outflow when the lateral lines, also known as field lines or leach lines, are in proper working order.

Sludge and paper products, which generally remain in the tanks, can, on rare occasions, make their way into the lateral lines and cause drainage issues. Perforations in the pipes are frequently used by aggressive tree roots to gain access to a system.

Septic System Cleaning Limitations

One of the most difficult problems to deal with when it comes to clearing blocked septic tank field lines is the presence of tree roots in the pipe. When seeking for a place to grow, the roots will choose the path of least resistance, which means that the perforations and hollow interiors of the pipes will be great real estate for them. Although a water jet may be powerful enough to tear off thinner roots, the roots will almost certainly regrow. Thicker roots are no match for plumber’s snakes or water jets and may require a more serious intervention, such as digging out the roots at the source.

When it comes to septic lateral line cleaning and root removal, however, prevention and continuing maintenance are essential components of the process.

Making the mistake of starting with roots in the soil and trees too near to the field is a recipe for disaster.

Septic Tank Lateral Line Installation

Home-Diy It is critical to the overall operation of a septic system that the installation of lateral lines be done correctly. Approximately one-quarter inch per foot should be applied to the pitch of the lines. Pitch is important because it ensures that waste materials flow correctly through the pipes without clogging them. Even a pipe that is sloping downwards at an excessive rate might cause issues. if (sources.length) then this.parentNode.removeChild(sources); else this.onerror = null; this.src = fallback; if (sources.length) then this.parentNode.removeChild(sources); else if (sources.length) then this.parentNode.removeChild(sources); else if (sources.length) then this.parentNode.remove ‘/public/images/logo-fallback.png’) is a fallback logo image.

• 4-inch PVC perforated pipe
• A shovel
• A backhoe
• A bubble level
• Rosin paper
• And a tape measure

Tip

Dump the dirt onto the rosin paper slowly so that the rosin paper does not shift while you’re doing it.

Warning

Townships are in charge of enforcing their own building regulations. Check with your local building inspector to see whether or not a permit is required.

1. Each lateral line should be inserted into one of the intake holes in the junction box. A quarter inch overhang into the junction box is required at each end of the pipes
2. Otherwise, they must be flush with the side of the junction box
3. The height of the pipes should be checked by measuring the distance from the bottom of the box to each input pipe’s bottom. Placing cement around the exterior of each pipe will help to keep the pipes connected to the junction box. Build a wall of stones around all four sides of the junction box until there are 10 to 12 inches of stone beneath the pipes. Gradually lower the stones until the slope is sloping down one-quarter inch per foot
4. Install perforated pipes from the junction box to the absorption field, extending them in a parallel fashion across the absorption field. A quarter inch per foot of pipe spacing is required, with the pipes sloping down away from the junction box at a rate of one-quarter inch per foot of pipe spacing. Your township may be able to provide you with particular lengths based on your local construction rules. Fill the area surrounding the pipe and on top of it with stones to ensure that the pipe does not move. The pipe should be covered at least two inches above the top of the pipe. Placing red rosin paper on top of the stones will prevent dirt from being incorporated into the stones. Fill in the remaining earth into the drain field on top of the rosin paper to complete the drainage system.

The Drip Cap

• It is critical to the overall operation of a septic system that the lateral lines be properly installed. Shovel stones around outside of the junction box until there is 10 to 12 inches of stone beneath the pipes. A quarter inch per foot of pipe spacing is required, with the pipes sloping down away from the junction box.

How to Replace Septic Lateral Lines

Home-Diy After a septic tank has anaerobically treated septic waste, the waste water is discharged through a supply pipe to the lateral lines of the system. Once the lateral lines have been installed, waste water is dispersed into the rock bed of the drain-field through holes located at the bottom of the pipe. When the length of the sources is equal to zero, this.parentNode.removeChild(sources); otherwise, this.onerror = null; this.src = fallback; )(, arguments.target.currentSrc.replace(), ‘, /public/images/logo-fallback.png’) ” loading=”lazy”> ” loading=”lazy”> The distribution lateral lines of a septic system are responsible for keeping the system operational.

These lateral lines are cleaned by septic system maintenance firms using high-pressure water that is introduced into the pipe using a flexible hose.

Damaged lateral lines can be caused by freezing or being run over by a vehicle. Lateral lines that are damaged, or that are not able to be cleaned properly or affordably, will need to be removed and replaced.

• Excavator, skid steer, laser level, septic system design, PVC saw, geotextile fabric, PVC primer, PVC cement

Tip

Before backfilling, place tiny amounts of dirt on top of the Geo-textile fabric to prevent the cloth from shifting throughout the process.

Warning

On top of drain-fields, only tracked vehicles and equipment should be used.

1. Using an excavator, remove the topsoil from the rock bed of the drain-field
2. Remove the current Geo-textile fabric from the top of the rock bed, taking care to keep the topsoil out of the rock layer as much as possible. Use a municipal debris container to dispose of the Geo-textile fabric. To install a new supply pipe in the rock bed, locate where the existing lateral lines connect to the pipe supply and cut the pipe with a PVC saw. With the laser level, measure the height of the lateral pipes
3. Remove the lateral pipes from the rock bed and dispose of them in a receptacle designated for municipal waste. Excavate trenches into the rock bed such that the height of the new pipe will be the same as that of the old pipe. The perforated pipe should be positioned in the rock trenches such that the perforations are facing downward. PVC priming should be applied to both the supply pipe and the new lateral pipe. PVC cement should be applied to both the supply pipe and the new lateral pipe before they are pressed together. Using your fingers, twist the pipe 14 inches and then hold it in place for 30 seconds. Remove the drain-field rock from around and on top of the freshly installed perforated pipe by shoveling it in. Place the new Geo-textile cloth on top of the rock bed by rolling it up. Install the fabric only on the top of the rock bed, not on the sides of the bed. A tracked skid-steer is used to spread topsoil over the excavated area. Make a mound of earth over the drain-field to deter surface water from entering.

The Drip Cap

• Septic waste is treated in an anaerobic manner in a septic tank and then discharged through a supply pipe to the lateral lines of the system. Once the lateral lines have dispersed waste water into the rock bed of the drain-field through holes in the bottom of the pipe, the system is complete. The perforated pipe should be positioned in the rock trenches such that the perforations are facing downward. Using your fingers, twist the pipe 14 inches and then hold it in place for 30 seconds. Make a mound of earth over the drain-field to deter surface water from entering.

Septic Systems 101

Whether you’re new to septic systems or have been using them your entire life, there are a few things you should be aware of that can help you operate and treat your septic system more effectively. Due to the fact that each septic system is unique, yours may be a little different based on your specific scenario and requirements. In general, though, having a fundamental grasp of septic systems, plumbing, and everything in between is always beneficial! We’ve compiled a list of some of the most often asked questions concerning septic systems that we receive, as well as some popular themes that people are interested in, in the section below.

Please let us know if there is anything you’d want to see added to this list, or if you require any extra assistance.

We are always more than delighted to assist you!

Contents

• Why Do Septic Systems Work? What Is a Septic System, and How Does It Work? Describe the many types of septic systems available.

• Aerobibic septic system
• Septic tank and field
• Septic tank and seepage pit
• Septic tank and lagoon

• What is the best way to tell if I am on a septic system? Are there any? If so, what kind? How to Care for Your Septic System in a Safe and Effective Manner

• The Importance of Pumping Your Septic System
• What Happens If I Don’t Pump My System
• What is the best way to treat my septic system? Is it even necessary to treat my system? Is It Possible to Damage My Septic System? In what condition will my septic system be in the future

• Septic Systems in Close Proximity to a Well
• Do I Need To Pump My System? The Consequences of Failure to Comply
• Do I Need To Treat My Septic System? My Pumper / Neighbor has informed me that I am not required to do so. Is it possible to damage my septic system? Is it possible to overuse my septic system? Do I need to use special toilet paper for my home while it is on a septic system? Can I plant a garden on top of my septic field? Taking Care of a Gray Water System

What Is A Septic System?

Essentially, a septic system is a sort of residential wastewater system. Septic systems, in contrast to sewer systems, which feed into a larger wastewater system, are completely self-contained and do not connect to a larger sewer network.

How Does A Septic System Work (Septic Tank + Field)?

A septic system is developed in a straightforward manner. Typically, a septic tank and a lateral line system or leach field are used, although there are a few additional designs available as well. Explore these less common sorts of systems further by touching or clicking on the link provided. The septic tank itself is typically constructed of concrete and has a capacity of around 1,500 gallons on average. Following the flushing of waste down a toilet or the washing of waste down a drain, the septic tank is the first destination for your waste.

• A separation of trash into scum and sludge takes place throughout the breakdown process.
• However, the sludge layer, on the other hand, is often found toward the bottom of the tank.
• Afterwards, when the residual wastewater has been separated from the scum and sludge, it runs out of the septic tank and onto the septic field (or leach field).
• The lateral lines are lengthy sections of tubing, often constructed of PVC, that have been perforated with tiny holes to allow for ventilation.
• Water from the septic system seeps out via the tiny gaps in these lateral lines and into the surrounding environment.
• Aside from bacteria that break down any trash that may be left in the wastewater from your septic tank, Biomat also includes bacteria that help to keep the process going.

As soon as the liquid has exited via the lateral lines and passed through the biomat layer, it seeps (also known as “leaches”) into the soil and ultimately makes its way back into the groundwater as clean water as a result of evaporation.

What Kinds Of Septic Systems are there?

Septic systems are available in a variety of configurations. Understanding the sort of septic system you have will assist you in keeping things clean and running.

Septic Tank + Field

Existing septic systems can be classified into various categories. Being aware of the sort of septic system you have can assist you in keeping things clean and running.

Septic Tank + Seepage Pit

This sort of system collects garbage in a big tank, where bacterial activities break down the waste and divide it into three types of waste: scum, sludge, and wastewater. The scum and sludge stay in the tank, while the liquid waste drains into a big seepage hole at the bottom of the tank. This pit is punctured with a series of openings that allow the liquid to drain out and into the surrounding earth. When comparing this system to a typical septic system, the most significant distinction is that a seepage pit allows the liquid to sink deeper into the earth rather than across a vast field as in a traditional septic system.

Septic Tank + Lagoon

Waste from a septic system that discharges into a lagoon is collected in a big septic tank, where microorganisms break down the waste, much as they do in other systems. When the liquid waste departs the tank, it pours out into a lagoon or pond-like body of water, which is a large body of water.

Aerobic System

Aerobic systems provide oxygen into a waste tank in order to stimulate the activity of aerobic microorganisms. Normal septic systems will experience increased activity of anaerobic bacteria in the absence of adequate oxygen supply (aka “bad” bacteria that stink). Anaerobic bacteria are frequently less productive than their aerobic counterparts. It follows that the effluent (or wastewater that comes out of a septic tank) from an aerobic system is substantially “cleaner” than the effluent from a conventional septic system in the larger picture.

Aerobic systems are discussed in further detail here (touch or click here).

How Do I Determine If I Am On A Septic System? And If So, What Type?

If you are not sure if you have a septic system working or not, there are a few factors that can suggest that you do indeed have a septic system. Here are a few examples of common indicators:

• Do you happen to reside in a remote area? Due to the fact that many rural areas are not connected to a sewage system, private septic systems are becoming increasingly popular in rural areas. In your backyard or in the fields around your home, are there any obvious lids or risers to be found? In most cases, they are entry points to your septic tank, but they can also be symptoms that your system is malfunctioning. Do you have a stand pipe in your backyard or field? If so, where? This pipe is also an indication that you have a septic system that is connected to your home’s plumbing system. Are you drinking from a well? Many homes that are connected to a well also rely on a septic system as their primary method of waste disposal.

A septic system can manifest itself in a variety of ways, including the following. Note that contacting a septic inspector and scheduling an examination of the property is generally regarded best practice in this situation. This examination will determine whether or not you have a septic system, as well as the sort of system you have.

How To Care For Your Septic System Safely

Your septic system will eventually become overburdened with waste. Manual removal of this garbage from the system will be required. Pumping is the method through which this solid waste is removed from the environment. We advised that you engage a septic system pumping service to remove the waste from your system. A septic system should be pumped out once every three years on average, however utilizing a product like Unique Septic System Digester can help to lengthen the period between pump outs.

Please keep in mind that the pumping schedule may need to be adjusted based on the amount of water used and the number of people living in your home.

What If I Don’t Pump My System?

Failure to pump a septic tank might result in devastating consequences. For example, foul odors escaping from your house’s drains, drain backups, flooding in your home, and standing water in your septic field are all potential consequences of this situation. In order to avoid this, it is critical to keep track of how full your tank is by performing a personal or professional inspection on a regular basis!

How Do I Treat My Septic System?

To ensure that your septic system is free of backups and continues to function properly, it is recommended that you treat it on a regular basis. Unique Septic System Digester is a product that we suggest. Septic System Digester is available in a number of various dose techniques; simply touch or clickhereto find out which approach is appropriate for your system’s needs. In the long term, using Septic System Digester on a regular basis will save you a significant amount of money.

Is It Necessary To Treat My System?

In a perfect environment, a septic system treatment would not be required; nonetheless, complications might emerge when a treatment technique is not used, which is sad. If you do not treat your septic system on a regular basis, you may have backups, obstructions, and unpleasant odors.

Can I Damage My Septic System?

A precise bacterial balance is required for septic systems to function properly and break down waste. Hazardous or caustic chemicals can be used to kill off the bacteria and stop the breakdown process, which might result in backlog and smells in the sewer system. Non-stop use of inappropriate chemicals can cause harm to your septic system, but it’s also possible to cause problems by overusing the chemicals you use. Even though overuse might differ depending on your septic system, it’s better to avoid activities that require you to send large amounts of water through your septic system in a 24-hour period.

Damage to the septic tank itself might be caused by tree roots that have spread out.

How Long Will My Septic System Last?

A well constructed and maintained septic system should endure for at least 40 years, if not longer.

Common Questions

If your system is correctly designed, the fact that it is placed near a well should not pose a problem for you. You should, however, call a septic system inspector and schedule a time for your well water to be checked for cross-contamination concerns, leaks, or other problems.

Do I Have To Pump My System? What Happens If I Don’t?

Yes. You do, in fact, need to prime your system. Over time, the trash in your septic system will accumulate. This waste has to be manually removed from the system in order to function properly. A failure to do so will result in sewage backing up into your home, which will stink and necessitate additional costly problems. Pumping is the method through which this solid waste is removed from the environment. We advised that you engage a septic system pumping service to remove the waste from your system.

By utilizing the Unique Septic System Digester, you will be able to increase the time between pump outs significantly. Please keep in mind that the pumping schedule may need to be adjusted based on the amount of water used and the number of people living in your home.

Do I Have To Treat My Septic System? My Pumper / Neighbor Says I Don’t Have To. What Happens If I Don’t?

The treatment of your system is highly suggested for a variety of reasons. First and foremost, treating your system on a regular basis will increase the time between pump outs, allowing you to save money. Second, treating your system provides you with peace of mind, knowing that you will not be subjected to any unpleasant scents or water that moves slowly through your system.

Can I Damage My Septic System?

Septic systems function by utilizing a very delicate balance of bacteria in your tank to break down the waste that is generated by your system. Using harsh or caustic chemicals can kill off the bacteria and prevent the breakdown process from taking place, resulting in blockages and smells in the system. Non-stop use of inappropriate chemicals can cause harm to your septic system, but it’s also possible to cause problems by overusing the chemicals you use. Even though overuse might differ depending on your septic system, it’s better to avoid activities that require you to send large amounts of water through your septic system in a 24-hour period.

Damage to the septic tank itself might be caused by tree roots that have spread out.

Can I Overuse My Septic System?

It is possible to experience problems as a result of excessive usage. It is advisable to avoid activities that require passing large quantities of water through your septic system in a 24-hour period, depending on your septic system’s capabilities.

Do I Need To Use Special Toilet Paper For My Home On A Septic System?

Many people who own septic systems are concerned about the type of toilet paper that should be used in their systems. The answer is straightforward: as long as you are using a Unique Septic System Digester, you may use any toilet paper that you would normally use in a standard sewage system without difficulty. You won’t have to worry about blockages in your septic system because of the bacteria in Septic System Digester, which will break down toilet paper extremely effectively.

Can I Plant A Garden On Top Of My Septic Field?

Many people who have septic systems choose to utilize the water from their sewage system to irrigate their lawn and garden. This may be a highly beneficial use of septic system water, but it is important to exercise caution when selecting the plants to be planted. Anything with a complex or extensive root system should be avoided. Make sure to stay away from anything that needs you to dig deeper than a few inches into the earth, as this might disrupt the delicate balance of your septic system.

According to some sites, it’s safe up to a certain distance, but here at Unique, we recommend that you avoid it entirely, purely for the purpose of being excessively careful.

How Gray Water Systems Work

A grey water system is a collection system for all of the water that is not connected to your septic system. Because this water does not include any typical waste materials, it originates from sources such as bathroom sinks, showers, bathtubs, and laundry lines (NOTE: Kitchen sinks and dish-washing lines are NOT part of the grey water system, as they contain food waste). The water from the grey water pipes is routed through a modest filtering system before being collected in a small holding tank, which is often only large enough to contain a few gallons of water.

The water collected by this grey water system is subsequently utilized to irrigate a garden, a line of trees, or other landscaping project.

Treating A Gray Water System

Keeping your grey water system clean and clear is a good and required habit in order to keep everything running smoothly. To use Unique Septic System Digester, we recommend that you pour 2 oz into the drain located in either your bathtub or shower once a month. Incorporating Septic System Digester into your grey water system will guarantee that your filtration system will last for a longer period of time and will avoid any sluggish flowing water that may arise as a result of accumulation inside the lateral lines.

Home Performance Group LLC

Do you require services for septic system installation or repair? When it comes to garbage disposal, having a well-maintained system is critical! Septic tanks and drain fields are cleaned, repaired, and installed on a regular basis by our professionals. Call (816) 744-8033 to speak with a member of our skilled and professional staff who will get the work done perfectly the first time. The following are some of the services we provide for septic systems:

• Lagoon installation and repair as well as Septic System design and repair, Septic tank installation, Aeration Treatment Unit installation, Lateral installation and repair as well as Lagoon installation and repair Installation of low-pressure pipes
• Repair of low-pressure pipes
• Installation of high-pressure drip lines
• Repair of high-pressure drip lines

Providing an essential service by collecting, treating, and disposing of wastewater is the septic system’s primary role in the home. It is critical to provide proper care and maintenance on a regular basis. For the most part, septic systems are comprised of two parts: an inlet septic tank for solid wastes and a disposal field for liquid wastes. Lateral lines or pipes carry the effluent to the drain field, where it is discharged into the environment. Tanks should be properly examined at least once every two years, and they should be cleaned every three to five years, according to the manufacturer.

Professional Septic System Services

Home Performance Group LLC provides the services required to keep septic systems in the greater Kansas City region operating safely and reliably over the long haul. Contact us now. In order to locate tanks and laterals, pinpoint failures, pump out tanks, protect the environment from water contamination, and resolve issues with older septic systems that weren’t designed to handle current demand, our skilled contractors combine training, experience, and tools. We adhere to all applicable codes, make every attempt to cause the least amount of inconvenience to your property, and provide unsurpassed quality of workmanship.

For septic tank and lateral line maintenance or repair, call Home Performance Group LLC!

Home Performance Group LLC provides timely service to help you extend the life of your septic system and laterals, prevent problems from occurring, and repair any type of malfunction. We may be reached at (816) 744-8033 to arrange a time that is suitable for you. We have deals and financing available to make everyday living more reasonable for you. You can count on us to take care of all of your plumbing requirements in Kearney and the surrounding areas, including Liberty and Excelsior Springs.

1. Nashua and Parkville.
2. A Waste Treatment System Installed on-Site OWTS (on-site waste treatment system) is also known as a septic system, lateral lines, private sewer, or lagoon, depending on where it is located.
3. What if I told you something you already knew?
4. Testing for percolation has been ruled out by the state or other entity with jurisdiction.
5. The Kansas City region is characterized by high clay content soils and high water tables, which make it unsuitable for the installation of simple septic and lateral systems.
6. Types of Systems Simple on-site wastewater treatment systems (OWTS) are made up of two components: a correctly sized septic tank and soil distribution piping, which can be either PVC pipes in gravel or chambers buried beneath the ground.
7. Evaporation of wastewater is aided by the wind and the sun.
8. Low-pressure pipe (LPP) distribution systems can be used to distribute water in some soils with shallow horizons.
9. A high-pressure drip irrigation system can be built on soils that will not support any other type of irrigation system, or as an alternative to other choices.

Septic or decentralized treatment systems are used to service about one-third of all new developments and single-family dwellings. Septic systems provide service to more than 60 million people in the United States.

LEARN MORE about Septic System Installation:

• Home Performance Group LLC provides timely service to extend the life of your septic system and laterals, prevent issues from occurring, and correct any sort of malfunction. Make an appointment with us by calling (816) 744-8033. We will respond quickly and efficiently. Everyday living is made more affordable with our promotions and financing options. For all of your plumbing requirements in Kearney, Liberty, Excelsior Springs, Smithville, Pleasant Valley, Nashua, Parkville, Weatherby Lake, and Gladstone, MO, we are your go-to option. Waste Management System on-site OWTS (on-site waste treatment system) is also known as a septic system, lateral lines, private sewer, or lagoon, depending on where it is installed. Even though each of these statements is theoretically valid, there are more than eight different types and configurations of OWTS. That’s right, it’s true. OWTS systems must be designed and submitted for system approval based on the soil morphology testing results. According to the state or authority in charge, percolation tests are no longer approved. Due to the fact that the soil functions as a filter, exchanger, and absorber, soil conditions are the most critical part of any OWTS system. The Kansas City region is characterized by high clay content soils and high water tables, which make simple septic and lateral systems unsuitable for use in this location. In order to ensure that effluent entering the soil is clear, septic tanks perform initial treatment by removing particles from wastewater and filtering the water. the many kinds of systems Simple on-site wastewater treatment systems (OWTS) are made up of two components: a correctly sized septic tank and soil distribution piping, which can be either PVC pipes in gravel or chambers buried below ground. Septic tanks and surface lagoons are an alternate option for soils that are not suitable for an OWTS system at its most basic level of performance. Evaporation of wastewater is aided by the wind and sun. In comparison to more modern systems, lagoons are a cost-effective alternative option. Low-pressure pipe (LPP) distribution systems are suitable for some soils with shallow horizons. A septic tank, a pumping chamber for pressure dosing, and a soil distribution piping system with a tiny diameter are all components of the system. A high-pressure drip irrigation system can be installed on soils that will not support any other system, or as an alternative to other options. In a Nutshell As reported by the Environmental Protection Agency, private on-site waste treatment systems are used by 20 percent of all American households. Septic or decentralized treatment systems are used to service about one-third of all new developments and single-family houses built today. Septic systems provide service to over 60 million people in the United States.

Septic Tank Installation

Several of our regular actions, such as bathing, doing laundry, flushing toilets, cooking meals, cleaning dishes, and other activities, result in the production of household wastewater. Few people pay any consideration to what happens to wastewater once it is flushed down the toilet. It is necessary to properly treat domestic wastewater (also known as sewage) because it contains nutrients, bacteria/viruses, and household chemicals that have the potential to contaminate our state’s land and waters.

Each underground sewage treatment system is tailored to a specific location and a specified volume of waste water to ensure optimal performance.

It is necessary to gather information about the following factors: soil characteristics (amount of sand, silt, and clay present), landscape, lot size and location (including estimated water usage), depth of groundwater tables (both seasonal and permanent), water well locations (yours and your neighbors’), and the location of nearby creeks, rivers, springs, ponds, and lakes, among other things, that may influence the location and size of your system.

DEQ Lateral Line Septic System Regulations

A soil test is performed to identify which type of septic system is most appropriate for your property. If you are establishing an aerobic septic system, you are not obliged to have a soil test; but, if you are installing a lateral septic system, you are required to get one since the soil in Oklahoma is such that lateral lines do not perform well.

How Your Septic System Works

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Specifically, this is how a typical conventional septic system works:

1. All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

• You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

• Taking a look at the “as constructed” drawing of your house
• Making a visual inspection of your yard for lids and manhole covers
• Getting in touch with a septic system service provider for assistance in locating it

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

• Water backing up into the drains of homes and businesses
• It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
• A strong stench emanating from the area surrounding the septic tank and drainfield

What is a lateral line system?

The inner workings of a septic system are not well understood by the general public. For individuals who have only recently developed an interest in learning more about their septic system, you may be tempted to ask the inevitable question. What is a lateral line system, and how does it work? The septic lateral lines will be the focal point of attention in this situation. Is it possible to describe the primary purpose of a lateral line system? Side by side drains are a component of the septic system.

• These lines are pipes that transport the pre-treated effluent to the drain field after it has been treated.
• There may be occasions when sludge is present in the pre-treated effluent notwithstanding the treatment process.
• It is common practice to use pressured water to clear a lateral line blockage when it occurs.
• Cracking and breaking are difficulties that might occur as a result of driving over the drain field or freezing.
• It is impossible to have smoothly moving lateral lines if the lines are damaged.
• One of the most important things you must do is identify your lateral lines.
• Here are some actions that you might want to take into consideration: 1.

Try looking in the basement or crawl area if you can’t find it.

Alternatively, if you have already located the sewer pipe in your yard, measure 10-20 feet from it in the direction in which it is intended to go.

Use a thin metal rod to probe about 2 feet into the tank until you reach the tank’s bottom.

4.

All you have to do is look for grass that is distinctive from the rest of the grass in your yard.

They are normally located at the bottom of the hill, directly next to your septic tank.

Keep an eye out for mounds or depressions.

The presence of standing water in the drain field may signal a leak or clog that needs to be addressed as soon as possible.

Septic tanks, whether they are built of concrete or metal, are typically reinforced with metal.

This would serve as a very valuable reference for future inspections and treatments.

Provide a copy of your map to your septic expert, and retain many copies for your own reference.

First, the top soil will be taken off the top of the rock bed, followed by the rock bed itself.

The geotextile fabric should be disposed of appropriately, ideally in a dumpster provided by your local government agency.

After the lateral line pipes have been measured, they will be removed from the rock bed and should be disposed of in the right manner.

After that, the new perforated pipe lines will be laid in the trenches with the holes facing downward.

After that, a coating of PVC cement should be placed to the supply and lateral pipes in order for them to adhere to one another better.

In order to replace the topsoil, lay the new geotextile over the rock bed and compact it.

Consult with your septic expert on the correct maintenance of your lateral lines so that it can operate at peak performance for the longest possible time. Make sure to ask him to clarify what a lateral line system is and what it is intended to do for you.

How Failing Lateral Lines can be Restored

The underlying workings of a septic system are not well understood by the general population. For individuals who have only recently developed an interest in learning more about their septic system, the natural question may arise:. The term “lateral line system” refers to a system that uses lateral lines. Here, it’s going to be the septic lateral lines that steal the spotlight. A lateral line system performs what is known as its primary purpose. Side by side pipes are a component of the septic system.

1. These lines are pipes that transport the pre-treated effluent to the drain field from the treatment plant.
2. Occasionally, sludge may be present in the pre-treated effluent even after it has been thoroughly cleaned.
3. It is common practice to use pressured water to clear a lateral line obstruction when this occurs.
4. Drifting across the drain field or freezing might result in cracking and fracturing of the concrete slab.
5. Having damaged lateral lines will never allow for seamless flow of the lines on either side.
6. Locating your lateral lines is a very important step in the process.
7. Take a look at some of the options below to get started: 1.

Try looking in the basement or crawl area if you can’t locate it.

Alternatively, if you have already located the sewer pipe in your yard, measure 10-20 feet from it in the direction in which it is intended to run.

Probe the tank with a thin metal rod for around 2 feet until you reach it.

In addition to the drain field, the lateral lines will be located near the septic tank.

Latitudinally aligned lines of grass are distinguished by being luxuriant and significantly greener.

5.

6.

The presence of standing water in the drain field may signal a leak or clog that needs to be addressed as soon as possible.

If you are having difficulty locating the septic tank, a metal detector may be necessary.

Once you’ve determined where your septic tank is, don’t forget to draw your own map.

Inspect the measurements to ensure that they are accurate.

It’s possible that an excavator will be necessary if you’re replacing the lateral lines.

This cloth should be removed with care in order to maintain the top soil intact and isolated from the rock layer underneath it.

After the supply pipe has been identified, it will be cut with a PVC saw.

They will then have to be properly disposed of.

Following that, the new perforated pipe lines will be laid in the trenches with the holes facing downward.

To ensure that the supply and lateral pipes adhere to one another, a coating of PVC cement should be put on both surfaces.

Replace the topsoil after installing the new geotextile over the rock bed.

For further information on how to care for your lateral lines so that they can last as long as possible, consult with your septic specialist. Make certain to ask him to clarify what a lateral line system is and what it is intended to accomplish.

About The Author

It is the intention of this brief post to assist readers in resolving the age-old topic of how to identify your lateral lines. A nice living space is distinguished by the use of high-quality materials in its construction and upkeep. This was something you made a point of ensuring when you had your new home constructed. We knew how vital it was for you to have a secure place to call home. Rain, snow, and high heat were all experienced at your chosen location. Hopefully, everything will remain in fine shape for many years to come.

Of course, you had to confer with your septic expert about the many factors that you needed to take into consideration.

But you were well aware that you would have to cope with it.

Not every homeowner is well-versed in the specifics of their individual leach field.

They are often compensated more for locating lateral lines, but your septic expert believed that it would be beneficial to him as well if you were aware of their location.

In a normal septic system, the drain field is present.

These lines are perforated to ensure that the effluent is distributed evenly.

The septic showed you how to locate your lateral lines because he needed to engage the clients he served in the process of care for their own systems.

In most cases, the lateral lines are laid 12-15 inches below the surface of the ground.

If you look at your yard with your naked eye, you will see that the lateral lines are present in areas where the grass is significantly greener.

However, this would indicate that there is already something wrong with the system in question.

Your septic expert, on the other hand, stated that, with the exception of lawn grass, there should be no plants over lateral lines.

Perennial plants, annual plants, shallow-rooted plants, and herbaceous plants should all be avoided while gardening.

The presence of a vegetable or fruit garden above your lateral lines is not recommended because of the significant danger of bacterial and virus contamination.

There should be no other plants planted over lateral lines except lawn grass.

After your septic specialist had departed, you got a fresh vision of the lateral lines of your system.

Remember to take responsibility for the upkeep of your septic system; this will ensure that the system will take care of you in the long run. If you’ve been wondering how to identify your lateral lines, we hope this post has been of assistance.

About The Author