How Do Inspectors Inspect Septic Tank? (Perfect answer)

Full Inspections In a full inspection, inspectors will remove the cover to the septic tank and check the water level. The water level can or show whether the water is draining properly. From there, the septic tank will get pumped and the inspector will check for any backflow from the absorption area.

What is involved in a septic inspection?

• Simply put a septic inspection is an observation that tells both the buyer and seller if the septic system can function as designed for the household. The inspector will also make repair recommendations.

What should I look for when inspecting a septic system?

There are three things a septic system inspector will check during an inspection including the integrity of the septic tank, the proper function of the distribution box, and a leach field that is working as intended. If all three of these components are working correctly you will have passed the septic inspection.

How do you know your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

1. Your Drains Are Taking Forever.
2. Standing Water Over Your Septic Tank.
3. Bad Smells Coming From Your Yard.
4. You Hear Gurgling Water.
5. You Have A Sewage Backup.
6. How often should you empty your septic tank?

What are signs of septic tank problems?

7 Warning Signs Your Septic System Is Failing

• Gurgling Pipes. They would occur when you run water in the house (e.g. when using the sink or shower) or flush the toilet.
• Bad Odours. It’s never a pleasant experience when this occurs.
• Water At Ground Level.
• Green Grass.
• Slow Drainage.
• Blocked Pipes.

How do I check my septic tanks sludge level?

To measure the sludge layer:

1. Slowly lower the tube into the septic tank until it touches the bottom of the tank.
2. As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

1. 1) Get on a Schedule.
2. 2) Take Care of the System.
3. 3) Know the Parts of Your System.
4. 4) Check Other Possible Issues.

Why does my septic tank fill up when it rains?

Septic systems are designed to only handle wastewater from the house. If runoff water from the storm gets into the septic tank, it will get full and since the soil in the leachfield will be already too saturated, the water will start backing up into the house or from the manhole.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

Do septic tanks smell?

A properly-maintained septic tank should be odor-free, so if you notice a bad smell inside your home or outside near the leach field, it’s a sign that there’s a problem. Septic odors are caused by gases in the system, including carbon dioxide, hydrogen sulfide, and methane.

How do you know when your leach field is failing?

The following are a few common signs of leach field failure: Grass over leach field is greener than the rest of the yard. The surrounding area is wet, mushy, or even has standing water. Sewage odors around drains, tank, or leach field.

Why do septic tanks need to be pumped?

To prevent your septic system from failing, it should be pumped out before the solids accumulate to the extent that they start to flow out of the tank with the effluent to the drain field. If the layer of sludge is greater than a third of the tank’s volume, it is time to have the tank pumped.

How do you tell if the leach field is clogged?

Stay vigilant for five signs your drainfield does not drain correctly anymore.

1. Slowing Drainage. Homeowners first notice slower than usual drainage from all the sinks, tubs, and toilets in a home when they have a compromised drainfield.
2. Rising Water.
3. Increasing Plant Growth.
4. Returning Flow.
5. Developing Odors.

Septic System Inspections

By Nick Gromicko, CMI® and Kenton Shepard A septic system is a system that collects, processes, and disposes of waste water and solids that are generated by a building’s plumbing system. When the solids are partially broken down into sludge, they are separated from the liquid effluent (water) and scum in a septic tank (fat, oil and grease). Effluent is discharged from the tank on a regular basis into a drainfield, where it is naturally filtered by microorganisms and re-enters the groundwater supply.

The septic system should be tested at least once a year, and it should be done immediately before putting the house on the market for sale.

Prospective home buyers who have not recently had their septic system checked should insist on having the system checked before they acquire the property, since it is in their best interests.

When it comes time to examine or pump the tank, this is typically not a problem.

• The placement of the tank should be depicted on a “as-built” design of the home. These drawings are commonly held at municipal health and zoning offices. It is possible that older systems do not have such a record. It is possible to get in touch with the prior owner
• Modern tanks are equipped with risers that protrude clearly above the ground surface. It is possible to probe a suspicious location using a thin metal rod that has been placed into the soil. It is critical to do this carefully and only in soft, wet soil in order to avoid damaging the tank and its associated pipelines. Another option is to use a shovel, although this will need a little more effort. If a sufficient number of tank components are made of metal, a metal detector can be utilized. A tiny radio transmitter may be flushed down the toilet and followed with a receiver
• The grass that grows the most lushly in a yard is frequently seen just over the sewage tank. Snow melts more quickly above the tank than it does in the rest of the yard. While they are not failsafe techniques of finding a place, they have been shown to be beneficial in the past.

What kinds of things may InterNACHI inspectors be looking for?

• Find out when the tank was last pumped by looking at the date on the tank. The sludge level should ultimately indicate if a tank has to be pumped, although having a record of past pumping dates might be useful as a reference. Using a “sludge judge” or a similar instrument, determine the amount of sludge present. It is normal for sludge to collect on the tank bottom, but it should not take up more than one-third of the tank’s total capacity or climb to the level of the baffles. The septic tank and drainfield should be located far away from wells and streams, for obvious reasons. Make certain that the system is large enough to accommodate the household it serves. A 1,200-gallon tank is normally required for a four-bedroom house, for example. The number of people who live in the house determines the size of the tank that is required. The tank’s capacity in gallons may be computed based on the size of the tank. For rectangular tanks, the capacity in gallons is equal to the product of the length, breadth, and depth in feet multiplied by 7.5. For circular tanks, the capacity in gallons is calculated as 3.14 times the radius squared x the depth in feet multiplied by 7.5. Check the ground surface for any liquid waste that has made its way to the surface. This is an unclean state that signals that the system is overburdened and needs to be repaired. In order to prevent wastewater contamination of groundwater and groundwater from flowing into the tank and causing it to overfill, make certain that it is waterproof. The presence of a riser lid should be checked for cracks and the integrity of the lid should be checked as well. Make sure that the baffles are properly attached to the tank’s inlet and exit pipes
• It is recommended that each drain line receives the same quantity of wastewater. By opening the distribution box, you will be able to see what they are made of. If the box becomes tipped or blocked, it will distribute effluent in an excessively large amount, and it may even flood areas of the drainfield.

In a septic tank, baffles are components that restrict wastewater entry to a sufficient degree to guarantee that particles are distilled and that solids (as well as scum) are not discharged into the drainfield. It is via this process that they are able to protect the soil’s absorptive quality and hence extend the life of the entire system. They are often constructed of the same materials as the septic tank, which might be fiberglass, steel, or concrete in construction. Inspectors should look for the following things in baffles:

• The baffle is covered in solids. This should be reported as soon as possible because it implies overflow. the erosion caused by chemicals and water movement an indication of a past overflow Ideally, the sewage level should be several inches below the baffle top of the drain. A lower level implies leakage, whereas a greater level indicates obstruction.

Inspectors should be familiar with the following facts so that they may advise their clients about the various ways in which they might cause harm to their septic system:

• The only thing that can be flushed down the toilet is bath tissue. Tampons, paper towels, cigarette butts, and diapers should all be disposed of in the garbage. In order to prevent microorganisms in the septic system from being damaged by household chemicals such as gasoline, paint, medicine, antifreeze, or pesticides from being flushed, they should never be put down the toilet or down the sink. In little volumes, detergents and bleach can make their way into the plumbing system. There should be no driving on or near the drainfield unless absolutely necessary. Their weight might cause damage to subsurface plumbing without them realizing it. There should be no other vegetation grown over the septic tank and drainfield. Roots from trees and huge bushes can create harm that is not visible. People are not permitted to excavate or construct structures on top of a drainfield. Ensure that all water drainage from rainwater, sump pumps, or any other source of surface water is diverted away from the drainfield. An over-saturated drainfield can cause the water treatment process to be slowed down and plumbing fittings to get clogged. Fixing leaking faucets and toilets as soon as they occur is a simple method to extend the life of a septic system and avoid having to pay for an expensive replacement. Any waste of water in the home should be avoided at all costs. Taking shorter showers and avoiding using the garbage disposal are two examples of strategies to conserve water.

• It is not recommended that inspectors enter the septic tank to search for cracks. Tank interiors are extremely filthy, and entering should be avoided at all costs. The fracture will most likely be located at the level of the effluent, which will have drained from the tank via the crack if one is there. An effluent level that is much lower than the level of the tank outflow is a clear indicator of the presence of a fracture. A tank that has flaws that enable sewage to escape into the surrounding soil is effectively a cesspool and should be removed as soon as possible
• If the water comes from the tank, it indicates that the septic system is overburdened and has to be repaired. Sometimes, inspectors will use a dye that is flushed down the toilet to confirm that the water is coming from the residence and not from somewhere else. Despite the fact that this metric might be beneficial, it is not an accepted means of testing the operation of a septic system. A malfunctioning septic system will be confirmed if dye from the flushed dye shows in the puddle
• However, a working septic system is not guaranteed if dye does not appear. It may take many days for the dye to develop, and it may be too diluted to see properly
• It is outside the scope of a standard house inspection to evaluate a septic system, and this needs specialized skills. Laws differ from one jurisdiction to the next, and inspectors should be well-versed in them before providing this job. They should disclaim all responsibility for any component of the septic system examination that they did not do

Septic systems are built to manage toxic waste and can pose major health dangers to residents and inspectors. Precautions include the following, in no particular order:

• Solid waste should be removed from septic tanks by a professional septic tank pumping service, not by an inspector. No one else should be allowed to enter a tank unless they are a licensed and properly equipped professional. Noxious gasses such as methane can induce asphyxiation and death in a matter of minutes. When a septic tank begins to exhibit indications of fragility, proceed with extreme caution! Collapse has the potential to be deadly. Keep an eye out for tanks with rusted metal, improvised lids, or anything else that seems to be in unsafe condition.

In conclusion, septic system inspections should be conducted on a yearly basis to verify that the system is operating properly. The septic tank is the most expensive household fixture, and it will have a much shorter lifespan if it is not properly cared for and maintained.

Septic Inspections When Buying or Selling a Home

You could be perplexed as to why you might want an aseptic examination before selling your house. Alternatively, are you purchasing a new home that includes a septic system? Get professional information on septic systems and collaborate with a seasoned real estate agent throughout the process. Prospective home buyers typically engage an inspector to do a thorough assessment of the property before making an offer on it. The examination will typically involve a visual evaluation of the house’s structure as well as a search for pests.

Septic inspections are extremely important for your health and the health of anybody else who lives in your house, so homeowners should make a point of scheduling them on a regular basis.

In case you are buying or selling a home, the septic inspection will be an important part of the process. Here is all you need to know about it.

What is a septic system?

One in every five homes in the United States is equipped with a septic system, yet you’d be shocked how many people are unaware of what they are. A septic system is a system that is designed to remove waste from a home or building. During normal operation, it collects and filters water and garbage from the washer, sinks, showers, and toilets before returning it to the sink. The mechanism then re-distributes the energy back into the earth. The entire procedure contributes to the reduction of water and soil pollution.

How often should you get a septic inspection?

The majority of specialists agree that you should get your septic tank examined at least once every three to five years. The examination normally takes place around the same time that you should have your septic tank pumped by a professional septic tank cleaning provider. In order to keep your septic tank healthy and in excellent functioning order, it is required to pump it regularly. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners wait considerably longer than this period.

At that point, inspectors will frequently recommend that you repair or replace your septic system, which can cost thousands of dollars if not done properly.

How is a septic inspection done?

Septic inspections may be divided into two categories.

Visual Inspections

If you are buying or selling a home, the home inspector will most likely complete a visual inspection of the property. In order to do a visual examination, a few questions must be asked, such as the age of the house, how often the owner pumps the septic system, and when the previous inspection was performed. The inspector will next flush all of the toilets in the house and run all of the water in the house to ensure that the water pressure is enough and that everything is draining correctly. At the end of the inspection, the inspector will walk out to the drain field to ensure that there is no standing water, which might indicate the presence of a cesspool.

Full Inspections

A thorough inspection contains all that a visual inspection does, but it also goes above and beyond that level of service. This is the inspection you’ll want to have done every three to five years, at the absolute least. Inspectors will remove the lid from the septic tank and assess the amount of water in the tank during a comprehensive examination. The level of the water might indicate whether or not the water is draining adequately. The inspector will next run water through the home to ensure that it is correctly draining from the house to the septic tank and that the water level within the tank does not rise as a result of the additional water being introduced into the system.

Dye tests are conducted to determine how much dye is incorporated into the water that is draining and how much of it makes its way into the sewage treatment plant.

Inspecting the backflow level will reveal whether or not there is an issue with your drain field.

It is therefore necessary to check the flow level once again to ensure that every part of the septic system is functioning properly and that there are no obstructions. Morse Engineering and Construction can provide you with further information. Source:listwithclever.com

Buying a House? Make Sure You Get a Septic System Inspection!

If you are in the process of purchasing a home, you are aware that there are several phases involved in the process. You put money together for a down payment, go to open houses, chat to sellers and real estate agents, and ultimately discover a place you love to call home. The exciting part is about to begin. There are several steps involved: making an offer, getting pre-approval, scheduling a home inspection, and eventually, after heaps of paperwork, claiming ownership of the property. But hold on a minute!

• You might be wondering why you would need to have your septic system inspected.
• Septic systems that are in poor working order can cost hundreds of thousands of dollars to repair or replace.
• When a roof leak occurs or a break in the foundation occurs, you would want to be aware of the situation.
• “Okay, but I previously completed a house inspection and a dye test.
• A septic system examination performed by a Pennsylvania Septage Management Association-certified inspector is the only method to determine the exact status of a septic system.

What is a septic system inspection?

Performing a septic system inspection entails a thorough examination of all of the components of a septic system. The inspector will determine the location and condition of the septic tank, distribution box, and absorption area and make recommendations. In this process, he will uncover and evaluate all of the mechanical and electrical components of the system, including septic lines, baffles and filters, pumps and floats, alarms, and so on. During the inspection, he will open the septic tank (digging up the lids, if required) so that he may confirm wastewater sources from the home to the septic tank and physically check the septic tank at its operational level.

If the home has been vacant for an extended period of time or if the number of people living in the home is expected to increase, the inspector will conduct a hydraulic load test to determine whether the septic system’s absorption area is capable of handling the anticipated daily wastewater volume of the home buyer’s family.

For septic systems in Pennsylvania, this implies that the inspector must have received training and certification from the Pennsylvania Septage Management Association (PSMA), which has created a set of requirements for an objective septic system assessment.

Each PSMA septic system inspection finishes with the delivery of a thorough report.

However, while this analysis does not provide a guarantee, the findings drawn from it may be able to save you thousands of dollars in septic system repairs or replacement.

If you do not have a PSMA inspection and report, you run the danger of inheriting the financial burden of substantial septic system repairs or perhaps the installation of a whole new system completely.

Septic System Inspection vs. Home Inspection

Inspections of the inside and exterior of a home are performed by professionals who are well-versed in the identification of typical faults. They will inform you if there are any evident issues with the roof, windows, electrical system, interior plumbing, foundation, or any other visible components of the house. A home inspection, on the other hand, is strictly a visual inspection that is non-invasive. Consequently, house inspectors only report on the components of the home that they can physically see, and nothing else.

• This implies that the septic system is not included in the scope of a standard house inspection.
• There is a good chance that they may flush the toilets a few times to ensure that the system is not actively backing up, and they may even remove the cover from the septic tank (if they can find it).
• How can a home inspector tell you what condition your septic tank is in if there isn’t a pump truck available to empty it?
• Despite the fact that home inspectors are well-versed in many aspects of the property, they are neither equipped nor prepared to conduct a thorough examination of a septic system.
• Rely on a PSMA inspector that specializes in septic systems to provide you with the most thorough and insightful septic system inspection available.

Septic System Inspection vs. Dye Test

Dyes are used in a dye test to check that wastewater is appropriately routed into the septic tank and not elsewhere on the land. Dyes are brightly colored and non-toxic, and they are safe to use. In basic English, a dye test reveals that water travels from point A to point B. At the time of a dye test, a technician will flush dye tablets down the toilet and down the drain, check to verify that the right wastewater sources are entering the septic tank, and walk about the property looking for dye.

A dye test cannot determine the size or condition of a septic tank.

Dye tests provide little information on the operation of critical septic system components such as baffles, pumps, floats, and alarms, among others.

When purchasing a property, don’t take a chance on a future filled with septic system failures and expensive repairs.

For a complete septic system inspection, rely on the PSMA-certified inspectors at Hapchuk, Inc. to conduct the work for you. Our professionals will supply you with all of the information and help you want in order to confidently acquire a house that has a septic system installed.

Don’t Forget The Septic Inspection When Buying a House

Septic system inspection is mandatory if you are planning to purchase a property that contains a septic tank. There are several things that may go wrong with septic systems, and with any sort of system, there is the potential for various problems to arise. Is it necessary to have a septic examination performed before purchasing a home? Before closing on a home, you should find out if there is an issue with the septic system that has to be addressed. The problems that might arise with a septic system can range from basic repairs to extremely sophisticated replacements that can cost tens of thousands of dollars or more.

How The Septic System Works

A septic system installed on a home property can be used in place of a municipal sewer system in some cases. In the United States, 25 percent of residences have decentralized systems, also known as septic systems, which are permanent components of our nation’s wastewater infrastructure, according to the Environmental Protection Agency. It all starts with the sanitary pipe that runs from the home and delivers waste water to the septic tank at the bottom of the hill. This big container is normally composed of concrete, fiberglass or steel, although it can also be made of plastic or aluminum.

• This tank collects wastewater from the home and allows particles to settle to the bottom of the tank, where they form a “sludge” layer that can be seen on the bottom of the tank.
• This scum layer forms a seal, which helps to keep air out of the tank, allowing bacteria to grow in the tank below.
• The area between the sludge and the scum is referred to as the effluent area.
• A T-shaped outlet is located inside the tank, which allows effluent to flow into the leach field by gravity, while baffles prevent scum and particles from passing through the tank and into the leach field.
• This box permits the effluent to flow uniformly into the proper chambers of the leach field, therefore reducing the risk of contamination.
• The final outcome is the same regardless of the method employed: the delivery of effluent into the leach field.
• There are a variety of various alternatives as far as the sorts of chambers employed.
• Leaching’s ultimate goal is to enable effluent to trickle down into the subsoil, where microorganisms in the top layers of soil continue to break down elements from the tank.
• Leach Field in a Residential Setting As you can see, a septic system is involved in a great deal of activity.
• A large number of homeowners are completely unaware of the importance of providing continuous maintenance, care, and cleaning for their septic systems.
• The results of the examination will be used to decide whether or not the tank needs to be emptied.

The cost of inspection and pumping might range between $300 and $500, depending on the location and size of the tank. The cost of maintenance is substantially less than the cost of repair or, in the worst case scenario, replacement of the equipment.

The Septic Inspection

If you’re doing the inspection as part of a house purchase, you’ll want to synchronize the scheduling of this test with the date of your regular property inspection to ensure that both tests are completed at the same time. Thus, if there are any issues with the plumbing systems of the home, these may be brought to the notice of the home inspector and documented in the inspection report. Additionally, grouping these inspections together will help you stay on schedule for any inspection contingency-related deadlines that you may be up against in the future.

At this point, you’ll be gathering documentation and obtaining answers to any queries you may have in preparation for the real inspection.

Because the system is underground, no examination can locate everything without excavating, which is unfeasible given the system’s location.

Here is a list ofquestions you will want to answer before the inspection:

• Is it possible that the system has ever been pumped? This one is significant since it is the only genuine maintenance issue that the seller would be required to have completed
• It is also the most expensive. The seller’s knowledge of the location of the septic system is critical because if the seller does not know where the septic system is located, it is doubtful that they have performed continuous maintenance. Septic System Location Map – Regardless of whatever institution is in charge of supervising septic systems in your region, they should have a map of the septic system location given by the original home builder on hand. This is a critical piece of documentation for the septic inspection. It should not only display the position of the tank, but also the location of the leach field and the number of leaching Chambers
• Any available history on the maintenance of the system -Things like:

• The frequency at which the system has been pumped
• What type of contractor was employed
• Obtain any maintenance records that may exist
• Have there been any issues
• If so, have they been resolved?

• Where have all the covers gone? -Manhole coverings should be installed over the tank’s chambers to prevent water from entering the tank. This will be the method through which the technician will get access to the tank in order to test and/or clean it.

Assembling this information will accomplish two things, first it’s going to allow the professional that inspects the system to know what to check and secondly it’s going to offer you an idea of how the house seller maintained the system.

The On Site Inspection

After arriving at the residence, the technician will attempt to determine whether or not the sanitary pipe used to transport liquid to the system is functional and in good working order by conducting a flow test on the pipe. As part of this test, you will need to turn on all of your water faucets in your home to add or charge your system with enough water to sustain as many people as the system was designed to support for 24 hours, which is often several hundred gallons. If there is little or no water flowing into the tank, it is likely that there is an issue with the plumbing in the residence or with the sanitary line that has to be addressed.

• If this is the case, an asewer line inspection may be required for the line.
• The opposite is true if the water in the tank rises rapidly, which indicates that a problem is occurring downstream.
• The flow test is the most major portion of the septic test since it affects so many aspects of the system and ensures that the liquids are moving through the system in the proper manner.
• A significant percentage of those solids will convert into sludge and settle at the bottom of the tank, even though it is intended that they remain in the tank until they are pumped out.
• Once this is completed, they resume pumping the tank until they reach the underlying sludge layer, at which time they take another reading.
• If this is not the case, the technician will be on the lookout for larger difficulties in the leach field at a later stage.
• It is critical to keep the sediments and scum out of the distribution area and leach field to avoid contamination.

The leach field will be the final place that the technician will inspect.

They will be looking for any moist locations where water may be lingering, as well as smelling for any nasty orders that may have been generated by difficulties.

if the probe holes rapidly fill with water, it is quite likely that there is a malfunction with the system The distribution box of a septic system is another location of possible failure in a septic system.

Settlement or blockage of the distribution box are the most common causes of distribution box problems.

As you can see, there is a vast range of possible issues that might arise with a private home septic system, which you should be aware of.

1995 U.S.

The United States Census Bureau conducted a survey in 1995.

You want to find out if there are any possible concerns with the property before you close on it. Including the testing of the septic system in the inspection process gives you the opportunity to engage the house seller in any later repairs through the use of an inspection objection contingency.

Additional Resources

• Bill Gassett discusses the Massachusetts Title 5 Septic System Law
• Luke Skar discusses home inspection tips for buyers. Find out how to analyze home inspection priorities with the help of the Shelhamer Group. The Ultimate Home Buyers Timeline – Danny Margagliano
• The Ultimate Home Buyers Timeline

Septic Inspections: 6 Questions You Need to Ask

You might be wondering why you would need a septic check before you put your house on the market. Alternatively, are you purchasing a new home that has a septic system? Get professional information on septic systems and collaborate with a seasoned real estate agent throughout the process. Prospective home buyers typically engage an inspector to do a thorough assessment of the property before making an offer on it. The examination will typically involve a visual evaluation of the house’s structure as well as a search for pests.

Septic inspections are extremely important for your health and the health of anybody else who lives in your house, so homeowners should make a point of scheduling them on a regular basis.

In case you are buying or selling a home, the septic inspection will be an important part of the process.

Need help in the home selling process?

An experienced Partner Agent can assist you in navigating the choppy waters of business.

What is a septic system?

One in every five homes in the United States is equipped with a septic system, yet you’d be shocked how many people are unaware of what they are. It is designed to eliminate waste from your home. When it is in functioning order, it takes the water and waste from your washing machine as well as your sinks, shower, and toilet and filters it via a filter. The mechanism then re-distributes the energy back into the earth. The entire process contributes to the reduction of water and soil pollution.a Here’s brief summary of how it works:The water and waste from the home go into the septic tank.The water and waste from the house go into the septic tank.

The liquid rises to the top of the container and passes through an absorption zone.

A layer of gravel serves as a drain field, filtering the water before it reaches the soil and becomes absorbed.

How often should you get a septic inspection?

A septic tank inspection is recommended at least once every three to five years, according to the majority of professionals. The examination normally takes place around the same time that you should have your septic tank pumped by a professional septic tank cleaning provider. In order to keep your septic tank healthy and in excellent functioning order, it is required to pump it regularly. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners wait considerably longer than this period.

At that point, inspectors will frequently recommend that you repair or replace your septic system, which can cost thousands of dollars if not done properly.

It can cost as much as $25,000, depending on the location of the system and the terrain of the land where the new system is being installed on the new system.

Maintaining frequent inspection and pumping will not only save you money on costly repairs in the future, but it will also help you avoid any unpleasant surprises if you decide to sell your home in the near future.

How is a septic inspection done?

Septic inspections may be divided into two categories.

Visual Inspections

If you are buying or selling a home, the home inspector will most likely do a visual assessment of the property. In order to do a visual examination, a few questions must be asked, such as the age of the house, how often the owner pumps the septic system, and when the previous inspection was performed. The inspector will next flush all of the toilets in the house and run all of the water in the house to ensure that the water pressure is enough and that everything is draining correctly. At the end of the inspection, the inspector will walk out to the drain field to ensure that there is no standing water, which might indicate the presence of a cesspool.

Full Inspections

A thorough inspection contains all that a visual inspection does, but it also goes above and beyond that level of service. This is the inspection you’ll want to have done every three to five years, at the absolute least. Inspectors will remove the lid from the septic tank and assess the amount of water in the tank during a comprehensive examination. The level of the water might indicate whether or not the water is draining adequately. The inspector will next run water through the home to ensure that it is correctly draining from the house to the septic tank and that the water level within the tank does not rise as a result of the additional water being introduced into the system.

Dye tests are conducted to determine how much dye is incorporated into the water that is draining and how much of it makes its way into the sewage treatment plant.

Inspecting the backflow level will reveal whether or not there is an issue with your drain field.

How much do septic inspections cost?

The cost of a septic inspection varies based on the level of detail with which they check the tank and the size of the tank, but for a 1,000-1,500 gallon tank, a comprehensive examination normally costs $300 to $600. Remember to inquire with your local health department to see if they provide inspections at a reduced rate. Keep in mind that the cost of evaluating your septic system may vary depending on who or what firm is doing the inspection. In certain areas (such as Texas), you are not need to obtain a license or certification order in order to examine sewage treatment plants.

A license in a number of sectors, both within their state and on a national level, will be held by the most competent inspectors.

How long do septic systems last?

Septic systems may endure for up to 25 years — and in some circumstances, indefinitely — depending on the conditions. Maintaining the system is critical to its overall performance and reliability. If you get your concrete septic tank inspected on a regular basis and make repairs as needed, it can endure for a lifetime or even longer.

Should I repair or replace my septic system?

Here are a couple of things to keep an eye out for.

Puddles in Your Yard

A smart option is to have an inspector come out and assess your septic system if there is any standing water in your yard over your septic system. Take precautions to keep yourself and your animals away from the water, since it may be contaminated with hazardous substances.

Backups

Having a significant number of plumbing backups is a symptom that something is wrong with your septic system. It could be something as simple as a small repair or as complex as a complete tank replacement, among other things. In either case, an inspector will be required to determine the situation.

Healthy Grass

In the event that you are having a significant number of plumbing backups, it is a symptom that something is wrong with your septic system. Depending on the situation, it might be anything from a small repair to a complete tank replacement. Regardless, an inspection will be required to determine this.

Results of an Inspection

Unless your assessment reveals tainted well water or irreversible damage to the septic tank itself, you will almost certainly need to replace your system.

How to Maintain Your Septic System

Tampons, paper towels, baby wipes, and any other foreign materials that cannot break down readily in your septic system should never be flushed down the toilet to ensure that your septic system lasts as long as possible. If you have a garbage disposal, use it to help break down any food that would otherwise block the pipes in your home. Make sure you never throw oil down the sink since it might clog up the septic tank and cause it to overflow. Try to find a laundry detergent that is also safe to use with septic systems.

You should make certain that your sump pump is not connected to your septic system before starting.

Selling a House with a Septic System

Some counties do not need a septic examination prior to a home sale, however others demand a thorough investigation before a home sale. Check with your county’s health department to see whether you are required to have a septic examination performed prior to selling your home. Completing your own pre-inspection might also assist you in identifying any potential problems. If the seller is aware of any concerns with the septic system, the law compels them to provide this information to the buyer before closing.

Both sellers and purchasers are perplexed as to who is ultimately responsible for repairing damage to the septic system. Repairing the septic system is normally the responsibility of the seller, although you may be able to negotiate prices as part of the transaction.

Buying a House with a Septic System

If you are acquiring a house with a septic system, you’ll want to know the answers to a few questions:

• What is the age of the house
• When was the septic tank last inspected and pumped
• Have you had any septic tank back-ups or standing water problems? Whether or if the septic tank has been repaired is unclear.

In addition, you’ll want to make certain that a third-party inspector does a comprehensive examination. When hiring an inspector, it may be tempting to hire someone who will go through the inspection fast and sign off with a gold star. However, you may end yourself acquiring a property that has a slew of issues down the future as a result of this decision. If you want assistance in locating a reputable inspector, your realtor will most likely be able to provide suggestions. In general, septic systems are quite efficient, as long as they are properly maintained.

You may also keep it in good condition by not flushing any non-biodegradable or harmful substances down your toilet.

Instead of doing it yourself, why not consult with a professional?

To get started, please call us at 1-833-2-CLEVER or fill out our online form today.

Related Articles

Everyone has undoubtedly heard the expression “it’s a filthy job, but someone has to do it.” After all, failure to periodically examine and repair your septic tank may result in a slew of unpleasant tasks to complete – and that’s not at all nice! Now, let’s take a look at what aseptic system inspection comprises and why it’s necessary.

The reasons for needing a septic tank inspection

You’ll almost always need to get your home’s septic system checked if you’re attempting to sell it. The same is true if you’re looking to purchase a home that has a septic system. When acquiring or selling a home, an aseptic inspection is a standard practice, and it is an unwritten law that the buyer must pay an inspector to do the inspection on their behalf. Pests will be checked for, and the septic system of the house will be inspected as part of this examination. Due to the fact that this is one of the most crucial components of your new home, you really require it.

1. These inspections are neither expensive nor time-consuming, and as a result, they should be conducted on a regular basis.
2. It’s possible that it will be too late by then.
3. It filters the water and then distributes it, with the primary purpose of reducing soil and water pollution in the surrounding environment.
4. It is vital to inspect and pump your tank on a regular basis to ensure that it is in good functioning condition as well as healthy.

Maintaining your septic tank on a regular basis is far less expensive than having to replace or repair it. Furthermore, there is little question that this will be a wise investment in the long term.

The types of septic inspections

Septic inspections may be divided into two categories:

• Visual inspections– These are normally performed by a home inspector when a house is being sold or purchased, and they include asking questions about the property and the house, such as when the previous inspection was performed, and so on. By running water and flushing all of the toilets in the property, the inspector may determine whether or not the water pressure in the house has been compromised. Cesspools, standing water, and the drain field will all be checked by the inspector as part of his inspection. This form of examination is quick and convenient, but it cannot tell you much about the condition of your septic tank, including whether it is healthy and safe. Full inspection is nearly identical to visual inspection, with the exception that it involves a considerably more extensive inspection. This is carried out by professionals and highly trained specialists who are equipped with the necessary equipment and tools for the job. The time period during which inspectors examine the water level in your septic tank to assess whether or not the water is draining properly. Additionally, they will do a few of checks to ensure that everything is in working condition before they proceed with the pumping.

The importance for frequent septic tank inspections cannot be overstated, as these checks not only save you money, but they also help to keep you and your family, as well as your property, healthy and safe. Get in touch with us right now for additional information or to schedule your next septic inspection.

What to expect at a well and septic inspection

• In the United States, more than one in every five houses is reliant on some form of septic system, according to the Environmental Protection Agency (EPA). It is common for potential buyers to be concerned when they learn that a house has a well and septic system, because these systems are expensive to fix or replace. You may, however, protect yourself by ensuring that you have a professional inspection performed
• But, what exactly does it entail? In locations where there is no access to centralized sewer systems, a septic system is a type of underground wastewater treatment system that is prevalent. Most rural properties with septic systems will also include a well that provides water for everyday usage. According to the Environmental Protection Agency, more than 15 million houses rely on private wells for drinking water. According to Nathan Foote of Health Services Expeditors, a well and septic inspection are equally as important as a house inspection in order to safeguard both buyers and sellers from any problems. In fact, in certain counties, an inspection is necessary before a building permit may be issued. Point-of-sale programs are mandated in Eaton, Ingham, Shiawassee, and Barry counties, which means that all wells and septic systems in the counties are subject to health department inspections before a sale can close, according to him. These regulations are not in effect in other counties like as Clinton and Jackson, according to the report. In counties where an inspection is not required, a lender will often require one, and if a lender does not need one, a buyer or seller will need to obtain one from the county clerk. When it comes to a real estate transaction, it is in everyone’s best interest to complete the deal as quickly and efficiently feasible. When it comes to mandatory reporting, you’ll need to get it done nonetheless, but getting it done early means you’ll have all of your information up front, which will help you prevent any surprises or unexpected equity loss. What is the significance of an inspection? Septic systems and wells are significant, high-dollar investments. Foote estimates that a reasonable replacement well will cost between $6,000 and $6,500, while a new drain field for a septic system will cost between $7,500 and $25,000, depending on the situation. During an inspection, the inspector will test the water system and examine the volume and pressure of the water flowing through the system. Their inspection will include checking the well to ensure it is properly constructed and compliant, as well as conducting water tests for bacteria, nitrate, and arsenic in accordance with local regulations. Besides looking at the pumping equipment, the inspector will also do a detailed plumbing assessment to determine how the water is entering into the system and where it is ending up. The contractor will also create a thorough map of the property indicating the position of the well, as well as the placement of the septic tank, the tank lid, and the drainfield. According to Foote, “we will also be inspecting the status of the drainage field.” “Does it appear to be operational? What is the age of the building? Additionally, the septic tank will require pumping, particularly if it has not been done in the previous three years.” Upon completion of the inspection, the inspector will submit the report to the party that requested it, which might be the county, a lender, or the buyer or seller. When submitted in to the county, the health department evaluates the report and determines if the system is authorized or rejected. If the plan is rejected, the parties will have to work with the county to come up with a plan to fix the problem. According to Foote, the cost of a well and septic check normally ranges between $600-$700, which includes the inspection procedure as well as laboratory expenses. The average cost of pumping a septic tank is around $350. Repairs, if any, can be quite expensive, and while the burden for repairs is normally on the seller’s shoulders, everything is contingent on the outcome of the discussions. Those counties with a point-of-sale mandate will give a list of licensed and approved well and septic inspections
• Nonetheless, it’s critical to hire an experienced, trustworthy professional. Do your homework and ask around for suggestions to find a qualified specialist. If you are considering acquiring a rural property, make sure to seek the assistance of a competent local REALTOR® who is familiar with these types of properties and who can guide you through the purchase and selling process. You may find a list of local agents and inspectors on the Greater Lansing Association of REALTORS® website, which can be found at

What Happens During a Septic System Inspection: Part II

Visual examinations have previously been discussed, as well as the dangers associated with them. Consider a comprehensive examination, which comprises both a visual check and the pumping of a tank performed simultaneously.

Full inspections 101

Inspection of conventional/standard septic systems and low pressure dosing systems is the most complete available. The tank is opened and the liquid level is measured, which might reveal whether or not the tank is leaking or whether or not it is overfilled. Providing the level remains normal, water is supplied into the system to ensure that water flows from the home to a storage container before being transported to an absorption area. The amount of liquid in the tank should not rise, and there should be no surface effluent over any section of the system, including the tank.

During the inspection, it is necessary to examine the flow from the home to the tank in order to ensure that everything is linked to the system.

Pumping can uncover other problems

In most cases, the entire tank is pumped during the inspection since septic tanks should be pumped every three to five years (on average). However, there are a handful of exceptions:

1. If the tank has recently been pumped and there are no solids in the tank, the tank is considered clean. In this case, a thorough inspection can still be performed by pumping the liquids down past the outlet baffle so that it can still be monitored for backflow from the absorption area
2. If the system fails the inspection before the pumping is performed (leaking tank, overfilled tank, backup while running water in the house, etc.)
3. If the system fails the inspection after the pumping is performed (leaking tank, overfilled tank, backup while running water in the house, etc.)

Your inspector should have questions

The inspector should ask several questions when a septic inspection is planned in order to have an understanding of the system’s history, current, and prospective usage, as well as any previous maintenance performed. These factors can have an impact on what is observed during the inspection and assist the inspector determine whether there is a problem or not. For example, when the inspector opens the tank, he or she finds that the liquid level has dropped significantly. Is the low liquid level due to a leak in the tank, or is it because the tank was recently pumped while the property was unoccupied and no one has been living there to replenish the tank to a regular level?

Regulations knowledge is critical

The Texas Commission on Environmental Quality (TCEQ) establishes minimum criteria for the state of Texas; however, any county or municipal government may impose more strict laws. For example, the Texas Commission on Environmental Quality’s buffer requirement from an absorption area to a well is 100 feet; however, the standard in Bexar County is 150 feet. However, each county may interpret TCEQ requirements differently, which is why Comal and Kendall counties for the most part follow the same set of rules.

It is critical that the inspector understands the requirements specific to each property in order for suggestions to be consistent with local regulations and for discussions to be conducted on the basis of correct information.

Choose the experts

Van Delden Wastewater Systems is a market-leading company in the real estate sector. Inspectors with the Texas Commission on Environmental Quality and National Association of Water Treatment (NAWT) certification. We do roughly 400 inspections each year and have a total expertise of more than 30 years in the industry. In January 2011, we led a NAWT re-certification program for the Texas Association of Real Estate Inspectors (TAREI), and in 2013, we delivered continuing education for both TAREI and the Central Texas Environmental Health Association (CTEHA), among other organizations.

Do you have any queries or would like to book an inspection?

Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future.

(Boerne).