How Do I Get A Copy Of My Septic Tank Location? (TOP 5 Tips)

How to Find Septic Tanks Through Records:

1. Ask the Prior Owner of the Property. This might be the easiest way to find a septic tank.
2. Consult County Records. The county should have a copy of your property’s septic tank installation permit records on file.
3. Call Around to the Local Septic Tank Pumping Companies.

• One of the best ways to pinpoint exactly where the septic tank is on your property is to perform a records search. If you still have a copy of your original home inspection, there may be an attached document called the “as-built.” This diagram will show exactly how far from the house the septic tank was installed.

How do I find out where my septic tank is located?

Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I get a drawing of my septic system?

The blueprint or drawings for septic system installations are on file with the local health department, as long as the system was built with a permit. The location, layout, components and any other details of the drain field are usually found on the septic tank lateral lines diagram.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

Where are most septic tanks located?

Toe the Line. Your septic tank will most certainly be installed along the main sewer line that runs out of your home. Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home.

How do you find a buried septic tank?

Tips for locating your septic tank

1. If the septic tank lid is underground, you can use a metal detector to locate it.
2. You can use a flushable transmitter that is flushed in the toilet and then the transmitter is tracked with a receiver.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
2. Check Permits and Public Records.
3. Determine Septic Tank Material.
4. Time to Dig.
5. Mark the Location for Future Maintenance.

Do I have to change my septic tank?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

How do I get certified to install septic tank in GA?

Certified Lists:

1. Review the certification requirements for individuals and companies.
2. Study for the exam(s).
3. Contact your County Environmental Health Office to schedule your exam.
4. Complete the application(s) and bring them to your county.
5. If starting a new company, pay your company certification fee.

Does every house have a septic tank?

A septic tank is a crucial part of a home’s septic system. In the U.S., about 20% of homes use a septic system to manage their wastewater. Septic systems are most commonly found in the Eastern U.S., with homes in rural areas of New England being the most likely to have a septic system present.

Can you walk on a leach field?

Your family can walk on a well-maintained drain field without fear of encountering puddles of affluent and dangerous bacteria. Bicycles and tricycles are also acceptable because they are not heavy enough to compress or disturb the soil.

Do old septic tanks need to be registered?

Many homes are not connected to mains drainage, instead having sewage treatment systems or septic tanks or occasionally cesspools. If your sewage treatment system or septic tank discharges to a river or stream it must be registered immediately.

How far does a septic tank have to be from a house UK?

Septic tanks should be at least 7 metres away from any habitable parts of the building. They should also be located within 30 metres of an access point so that the tank can be emptied.

Can you sell a property with a septic tank?

If you’re selling a property with a septic tank, then you must be transparent with buyers about the fact the property uses a one and provide a detailed specification of the system. In fact, You are required by law to inform a buyer in writing about the presence of a septic tank. The age of the system.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

• Paved surfaces
• Unique landscaping
• Your water well, if you have one
• And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

It is also possible to question your neighbors about the location of their septic system on their property if you are still having trouble locating yours. Finding out how far away their septic systems are will help you figure out where yours may be hidden in your yard or garden.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems.

Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.

How To Find My Septic Tank

1. What is a septic tank
2. How do I know if I have a septic tank
3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

• “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
• When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
• The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
• In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

• A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
• A septic system is likely to be installed in your home if you reside in a rather rural location.
• Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
• When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
• Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

Once you have determined the location of your sewer system, you can quickly direct a plumber to the tank if an issue arises, saving both time and money for everyone involved. Immediately Contact a Plumber

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
6. When the snake comes to a complete halt, it has almost certainly reached the tank.
7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

• Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
• Directly in front of the home Immediately adjacent to your well (if you have one)
• In close proximity to trees or densely planted regions
• In the shadow of a patio, deck, or other building

It might be found underneath the driveway or similar paved surface. Near the home (the tank must be at least five feet away); right up against the house; Next to your well (if you have one); next to your house. Close to trees or densely vegetated places. In the shadow of a patio, deck, or other building;

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

Find Septic soakaway / drainfield location using documents

• Send in your question or comment regarding septic tank and drainfield records, sketches, or diagrams that demonstrate component placement – utilizing documented information to locate the septic system
• And

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Using records to locate a septic drainfield or soakbed is described as follows: How to get records and revew papers in order to locate a septic tank, drainfield, or soakaway bed in a home or business. How to request paperwork that can document the septic system design “as approved” as well as that which was “as built” is explained in detail.

We also have anARTICLE INDEX for this topic, and you can use the SEARCH BOXes at the top and bottom of the page to obtain the information you need quickly and easily.

How to Use Septic System Records to Find the Drainfield – Whom to Ask – How to Find the Septic Leach Fields – Part 3

When it comes to septic systems, understanding where the drainfield is may be difficult because they are often underground systems. Finding the drainfield can be difficult because they are usually hidden. Because haphazard excavation by hand is extremely time-consuming and because haphazard excavation by backhoe can cause unnecessarily extensive damage to both a septic system and a homesite, drawing a sketch of the location of a septic tank, distribution box, and drainfield trenches or pits is a valuable document to prepare and keep with a home.

1. Ask the owner if they have any sketches to leave with you; if they don’t have any sketches but know where the septic components are, walk the property with them and produce your own sketch of the septic components.
2. Because anybody seeking for the system in the future is likely to start by locating the point where the sewage line exits the building, a former service worker or contractor understood it was a dependable location to leave a sketch.
3. In certain cases, even though septic system and drainfield layout drawings have been submitted, it is possible that the “as built” drain field will not be identical to the plan filed since blockages might be identified during the drain field installation process.
4. The septic tank’s center may be located using the simple but accurate measurement triangle depicted in the diagram below.
5. It is not need to be visually appealing, to scale, or costly.
6. Never rely on the local health agency or the building department to have drawings that show where the fields are located precisely.
7. During our investigation, we discovered that one municipality had purposefully destroyed 50 years’ worth of septic and other construction plan records because they were tired of being pestered by residents who wanted that information and then complained when it turned out to be incorrect.
8. Speak with contractors who are listed under the categories of Excavation, Plumbing, and Septic System Service since the excavator who has installed or worked on the property of your concern may be classified under one of those categories but not all of them.
9. This article series, as well as our accompanyingSEPTIC LOCATION VIDEO, demonstrates how to locate the leach field or drainfield section of a septic system by going around a site with a camera.

(Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.)

Reader CommentsQ A

@Joseph Coburn, please display the records regarding your septic system. Yes, Joseph, I’d be delighted to assist you in locating the leach bed on your property: Simply follow the “how to identify the drainfield” techniques and procedures outlined in the articles listed above under “Recommended Articles” labeled “How to Find the Drainfield.” LOCATION OF THE SEPTIC DRAINFIELD – BEGIN HERE PRECISE DRAINFIELD PIPE LOCATION – follow these procedures if you need to be precise with your drainage pipe location.

• More drainfield choices and approaches are available, including: It is necessary to excavate in order to locate drainage fields.
• REMARKING DRAINFIELD LOCATIONS OUT OF THE BOUNDS OF THE POSSIBLY UNLIKELY CLUES FROM THE VISUAL WORLD LOCATE THE DRAINFIELD VIA VISUAL INSTRUCTIONS LOCATE THE SEPTIC TANK IN ORDER TO FIND THE LEACH BEDS LOCATE @Dan Dyer, thank you for your comment.
• also have a look at the comments on your identical post at The location of my drain field has been discovered, and I need to figure out where the rest of it is before I can proceed to complete the task on time.
• As well as this, see THE LOCATION OF THE SEPTIC TANK AND THE LOCATION OF THE SEPTIC D-BOX Attempting to locate a septic system Septic drain field is located at 13368 East 49th Drive in Yuma.
• I’m looking to discover if there is any public information on a septic tank located at 5391 Hollis Goodwin rd.
• Continue reading at an SURPRISING DRAINFIELD LOCATIONALITY Select a topic from the closely-related articles listed below, or browse the entireARTICLE INDEX for more information.

Septic Drainfield Location Articles

• Clearance Disturbances, Septic System
• Odors, Septic or Sewer
• Locations of Septic Components
• Septic Drainfield Inspection Test at Home
• Septic Drainfield Location
• Septic Drainfield Inspection Test at Work

• LOCATION OF THE DRAINFIELD PIPE, EXACT
• EXCAVATE TO LOCATE THE DRAINFIELD
• REASONS FOR LOCATION OF THE DRAINFIELD
• Recordings to LOCATE the DRAINFIELD
• SURPRISING DRAINFIELD LOCATIONS
• UNLIKELY DRAINFIELD LOCATIONS
• VISUAL CLUES LOCATE the DRAINFIELD
• VISUAL CLUES LOCATE the SEPTIC TANK

• EXCAVATE TO LOCATE THE DRAINFIELD
• REASONS FOR FINDING THE DRAINFIELD
• EXCAVATE TO LOCATE THE DRAINFIELD Recordings to LOCATE the DRAINFIELD
• SURPRISING DRAINFIELD LOCATIONS
• UNLIKELY DRAINFIELD LOCATIONS
• VISUAL CLUES LOCATE the DRAINFIELD
• VISUAL CLUES LOCATE the SEPTIC TANK

Suggested citation for this web page

It is necessary to keep records in order to locate the drainfieldDatInspect A pedia.com- online encyclopedia of building environmental inspection, testing, diagnosis, repair and guidance on issue avoidance. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How To Locate a Septic Tank

Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Public health records can be obtained by contacting your local health department.

1. These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.
2. Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
3. Make contact with the construction company that built your home.
4. Find the location of the main sewer line.
5. Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
6. By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
7. The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.

An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.

Please contact us.

We have specialized technology that we can use to pinpoint the location of your tank.

You should make a note of the position of your tank for future reference if you were successful in discovering it.

A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.

As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.

How to locate a septic tank

The location of a septic tank is frequently inquired about by consumers. A professional may be required to lift the lids of your septic tank if your tank does not have specific risers that raise the lids above the ground level. Prior to calling for assistance, there are a few things you may do to prepare yourself. It will save you money when you need to have your septic system serviced if you can identify your own septic system. For public health records, you should contact your local health agency.

1. In addition to the permit, a schematic showing the placement of the septic system should be included.
2. Request for Public Records from the Nevada County government.
3. Alternatively, you might go over the homeowner’s inspection report that was completed when you acquired your property, since this may provide the diagram that you require to identify your septic tank’s location.
4. Your home’s architect or builder should be able to provide you with an architectural drawing of the structure, which will show you where the septic tank is.
5. Generally speaking, the main sewage line originates in your crawl space or basement and leaves the side of your house, as shown in the illustration.
6. Then take another measurement at the same spot outside the home.
7. Keep from pressing too hard if you encounter resistance; otherwise, the septic line might be damaged.

Employ the services of a metal detecting professional.

Wearing steel-toed boots or other shoes containing steel is not recommended for safety reasons.

We can assist you if you have attempted all of our suggestions on how to identify a septic tank without success.

This is after you’ve located your sewage treatment system.

If you are having your septic system pumped or inspected soon, you may want to consider having risers added as part of the procedure.

It makes it easier to identify and access your septic tank since a riser elevates the septic lid above the earth. As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, allowing you to save money on your landscape maintenance.

For homes built in the last five (5) years or less

Obtain a copy of your septic tank permit from your local Department of Health and Human Services office. Please fill out as much of the information below as possible to help us expedite the search:

• Number of the tax map
• Lot number
• Block number
• Address in the physical world
• When the system was installed or when the house was built (if this information is available)
• Name of the original permit holder (if any information is available)
• Name of the subdivision (if the property is located within a subdivision)

Lot and block numbers, as well as the tax map number address on a physical map (If known) When the system was installed or when the house was built the first permission holder’s name (if any information is available); If the property is located within a subdivision, the subdivision name should be included here as well.

For homes older than five (5) years or if a copy of the septic permit was not able to be located.

It is recommended that you call an experienced septic contractor who will come to the site and assist you with the identification of the current septic system. You may find a list of licensed septic installers by clicking here.

Tags

Please arrange for a professional septic contractor to inspect the site and aid you in locating the current septic system on the property. You may get a list of licensed septic installers by visiting this link.

Looking for Your Septic Tank? Here’s How to Find It

“It’s 9 o’clock, do you know where your septic tank is?” says the interrogator. Maybe this is a little over the top, but it’s a question that many of our clients have asked over the years. In particular, new homeowners who are unfamiliar with the inner workings of their home or who haven’t needed septic tank servicing yet should be aware of the risks involved. Knowing where your septic tank is located is essential for routine maintenance and when you wish to add additional landscaping to your property.

Why you need to know where your septic tank is located

If your house does not have access to municipal sewage services, it is almost inevitable that you have a septic tank to redirect and store all of your wastewater someplace on your property’s subterranean drainage system. While a septic system is trustworthy and cost-effective, it does not operate without some kind of upkeep. According to the Environmental Protection Agency, a septic tank should be examined at least once every three years and drained every three to five years at the absolute least.

In either of these scenarios, you’ll need to know the location of your septic tank so that you can arrange for it to be serviced.

How to find your septic tank

1. Even if your house does not have access to municipal sewage services, it is almost guaranteed that you have a septic tank to redirect and store all of the wastewater generated on the premises. Despite the fact that a septic system is trustworthy and cost-effective, it does not operate without some kind of upkeep. As recommended by the Environmental Protection Agency (EPA), an inspection and pumping of septic tanks should be performed every three to five years, at the very least. Another possibility is that there is an issue with the tank or pipelines. To get your septic tank serviced in any of these situations, you’ll need to know where it is located on your property.

After you’ve located your septic tank, make a note of the position on a map or mark it on your GPS device for future reference. This will assist you in avoiding the construction of structures or the planting of deep-rooted plants in the vicinity of the sewage line and septic tank. When it comes to selling your house, a map or handwritten diagram may also be beneficial. If you want plumbing assistance in New Haven or Fairfield County, Rick’s Plumbing is the brand you can rely on. In order to obtain expert assistance, please send us a message or phone us at (203) 874-6629.

• The post was published on July 16, 2019 under the category Septic Tank System.

How to locate your septic tank and your drainfield

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis.

It is impossible to perform maintenance operations, however, if you do not know where the tank is located. You can identify your septic tank by following a few simple procedures, which are outlined here.

Steps to follow to locate your septic tank and drain field

The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.

• If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
• This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
• Simply look for possible access coverings or a structure that might be concealing it.
• These pumps are used to remove waste from the building.
• It is supposed to be connected to the sewage output pipe.
• As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall.
• As a result, it is probable that the tank will be positioned around the corner from the building.

Tips for locating your septic tank

Using the sewer outlet in your basement as a guide, you may establish where the sewer line departs your home through an outside wall. The septic tank will be located a few meters away from the home, and the outflow pipe may be at an angle of 30 or 45 degrees to the ground. As a result, it is conceivable that the tank will be positioned around the corner from where the tank is currently. Start from the outlet and make your way around the house in a circle until you find the septic tank.

• It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
• Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Prevent being overly harsh with your shovel in order to avoid causing harm to the pipes. Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.

It is possible that someone will fall into the tank, causing significant damage or possibly death.

Conclusion

You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.

Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.

Online Septic Research

The Environmental Services Department of Maricopa County maintains a database that contains all of the county’s existing approved septic systems for the purpose of preservation. Please bear in mind that property owners are responsible for maintaining accurate records of the location and maintenance of their septic system for the duration of the system’s life.

Alteration Permit

An Alteration Permit will be required for onsite systems that have a failing tank or disposal field.

Abandonment Permit

An Abandonment Permit will be required for any onsite systems that are to be abandoned in order to connect to the municipal sewage system or that are to be taken out of operation.

Research

Option 1: You may perform your own study at no cost by using the Online Septic Search Tool (available at no expense). Option 2: You can call the Environmental Services Department and ask for a more in-depth search to be undertaken (fees will apply for research conducted by the department for each parcel).

• Researchers charge a cost of $30 for research requests that take 3 to 7 business days. Expedited researchers charge a $60 price for research requests that take 1 to 2 business days. Septic Research Request Form.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

The fact that one of the largest and most visible elements of your whole plumbing system is simultaneously one of the most difficult to locate may seem impossible to believe, but when your property is served by a septic system, this is exactly true! There’s a solid reason for this: septic tanks are huge, unattractive, smell unpleasant, and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable area on your property and hides what would otherwise be a blight on your neighborhood.

You may identify your septic system using this blog, which eliminates the need for any time-consuming, labor-intensive digging.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The inspection documentation should include a septic tank map if you are a new homeowner who is trying to figure out where your septic tank is located. You can use this information to assist you in locating the precise position of your storage tank. It’s possible to use some different techniques if you don’t have access to this map.

• Immediately adjacent to your well
• Beneath your home
• Directly against your home
• For example, underneath your driveway
• Under trees
• And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

• Your water well, if you have one (for a variety of reasons that are rather clear)
• Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
• Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
• Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

• If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
• Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities.

You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!