How Do I Find Map Of My Septic Tank And Lines? (Best solution)

Go to your basement or crawl space, and then look for the main sewer line that leads to your septic tank. Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside.

  • Consult a Septic Tank Diagram or Map This is the easiest way to find your septic tank, as it will indicate exactly where the tank and drain field is located on the property. If you have recently purchased the property, the septic tank map/diagram should be included with the house plans and inspection paperwork.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

How far down is a leach field?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

How do you test a septic drain field?

In order to test the overall health and liquid capacity for your leach field, it is necessary to perform a hydraulic load test. This is done by running water at a certain rate over an allotted period of time. A failure occurs when water back-drains to the source before that allotted time period is up.

Can I drive over my leach field?

Can You Drive on a Septic Drain Field? No, driving over your septic drain field is similarly never ever recommended. As much as you are able to help it, prevent cars or heavy equipment (such as oil delivery trucks, swimming pool water trucks, cement mixers, and also the like) to drive straight over the field.

Will metal detector find septic tank?

If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How often should a septic tank be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

Are septic tanks still legal?

Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

Do old septic tanks have to be registered?

A septic tank discharges water into the ground, and the quantity of such is important so as to avoid damage to the environment. If your septic tank discharges two cubic metres or less above ground, then you don’t need to register it. If it releases five cubic metres, or less, below ground level then it is also exempt.

Do old septic tanks need to be registered?

Many homes are not connected to mains drainage, instead having sewage treatment systems or septic tanks or occasionally cesspools. If your sewage treatment system or septic tank discharges to a river or stream it must be registered immediately.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

A septic system is a system for the management of sewage and wastewater. Water will flow out of your home through pipes until it reaches your septic tank outside your home, to put it another way. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as they decompose. Eventually, the solids will fall to the bottom of the tank, and the liquids will drain into your leach field.

What do I do once I locate my septic tank?

A septic system is a mechanism for managing wastewater. Water will flow out of your home through pipes until it reaches your septic tank outside your home. In most cases, the septic tank is buried underground. Solids and liquids will separate within the septic tank. It is certain that the solids will settle to the bottom, and the liquids will flow into your leach field.

How to Find My Septic Tank Lines

Credit: Petegar/E+/Getty Images for the image

In This Article

  • Septic System Fundamentals
  • Identifying and Locating a Septic Tank on Your Property
  • Conducting Regular Inspections
  • Checking for Clean-Outs
  • Identifying Natural Indicators
  • Viewing System Diagrams
  • Seek Professional Assistance
  • Check the distribution box
  • Understand the size and scope of the project.

Are you curious about the location of your septic lines? It is critical to know where the septic tank is located on a property in order to properly manage and preserve the system. For example, you don’t want to pave over the ground or grow trees too close together in a forest. It is possible to obtain a copy of the septic tank diagram of the drain field, which will give you a fair sense of where the pipes will go. If this is not the case, you may need to attempt some other methods of locating septic drain lines.

The solids and liquids are separated within the tank by a baffle or wall that is built inside the tank.

When pipes get clogged or when drain fields become too saturated with fluids, problems arise. Other issues might arise as a result of incorrect placement, design defects, or bad installation.

Locating a Septic Tank on Your Property

Begin your search for the septic tank lines at the residence first. Drain lines from the home’s plumbing should be traced to the septic tank, which is typically located 10 to 20 feet from the home’s exterior. The drain line connects the tank’s end, which is located opposite the house, to the leach field. Check the natural slope of the ground to see whether the leach field may be found there. It is never a good idea to look for drain lines using heavy gear, wrecking bars, or jackhammers. Before excavating, contact your local electric utility provider or gas company to determine the location of underground gas or utility lines.

Plunge the long, thin metal probe into the earth until you can feel it strike the tank and feel the tank’s edges.

Perform Regular Inspection

According to industry experts, you should examine your septic tanks and, if required, pump them out once every three years. If you are experiencing gurgling sounds in your house or water backing up after your system has been repaired, a saturated drain field might be the source of the problem. Drain fields that have been clogged or damaged are unable to be rectified. In order for the septic system to function properly again, you’ll need to have a new drain field installed. Find capped clean-outs that are a few inches vertically above the ground in the leach field itself, or check behind a wall or in a closet in the basement for capped clean-outs.

  • You can visually trace the orientation of the pipe from the clean-out if there is no other information available.
  • Credit: Kyryl Gorlov/iStock/Getty Images for the image.
  • When you are looking for the lines, look for grass or vegetation that greens in stripes when the grass surrounding it browns.
  • Putting hot water into your system might cause snow or ice to melt above the drain pipes if the system is not properly insulated.
  • If you have a deep system, as is the case for homes with basements, you will most likely not be able to observe natural signs since the drain field is too deep to be seen from above.
  • Unless the system was built without a permit, the blueprints or designs for septic system installations are kept on file with the local health authority until the system is operational.
  • If your search does not provide any relevant results, you can request a record search based on your street address or the tax account number associated with the property.
  • If the agency has a copy of the record, they will mail it to you.
  • If you don’t have a drawing of the septic system, you need enlist the assistance of a disposal system contractor or a certified liquid waste transporter to find it.

Another option is to purchase a flushable transmitter from a plumbing or rental business, or you may contract with a tank cleaning firm. The signal from the transmitter is picked up by a hand-held receiver after it has been flushed down the toilet.

Check the Distribution Box

There are certain septic tanks that feature an extra distribution box that is located a few feet from the tank on the tank’s downstream side. Water is channeled into the trenches by ports and pipes in the box. It is recommended that, if your system includes a distribution box, the box’s top be designed to expose the orientation of the ports that connect to the drain field lines. It is feasible to locate the box with a probe, but extreme caution should be exercised. Avoid applying excessive force to the probe, since this may result in damage to the box.

See also:  How Far Should Septic Tank Be From Home? (Perfect answer)

In most cases, individual drain lines run perpendicular to the intake line, but they may also branch into an H-pattern or other patterns that are appropriate for the terrain.

Find the location of your septic drain lines so that you can safeguard the area in and around them with a little detective work.

How To Find My Septic Tank

  1. What is a septic tank
  2. How do I know if I have a septic tank
  3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
  4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

  1. “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
  2. When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
  3. The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
  4. In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

  • A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
  • A septic system is likely to be installed in your home if you reside in a rather rural location.
  • Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
  • When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
  • Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

  • If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
  • The county health department is responsible for keeping track of septic systems.
  • A septic tank’s position could be depicted on a survey map, for example.
  • The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

  1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
  2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
  3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
  4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
  5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
  6. When the snake comes to a complete halt, it has almost certainly reached the tank.
  7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
  8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

  • Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
  • Directly in front of the home Immediately adjacent to your well (if you have one)
  • In close proximity to trees or densely planted regions
  • In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

See also:  What Can We Use For A Backed Up Septic Tank?

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

How to Locate Your Septic Tank Field Lines

Your septic tank field lines are undoubtedly present, but where exactly can you find them? They are less difficult to locate than you may believe. In this post, we will learn how to locate them by studying what to look for. After reading this, the vast majority of people should be able to locate their system without the aid of a specialist.

Why Does it Matter?

Getting into problems with the law is easy if you’re conducting household chores and accidently damage your field lines. It is worthwhile to find your field lines if you want to save money and time in the long run.

The following types of work can harm your lines: any form of paving, driving and parking heavy equipment, planting shrubs or trees, and landscaping are just a few examples. Even the smallest omission can result in financial losses of hundreds or thousands of dollars.

Who Should Look for the Lines?

Locating the field lines for your septic tank is a very simple procedure. There is no unique training or skill set necessary for this position. In other circumstances, it may be impossible to locate the lines on your own, and you may need to seek expert assistance. In the majority of circumstances, anybody may search for the lines. You, too, can succeed with a little assistance from this essay. More information may be found at:

  • How to Select and Use the Most Effective Septic Tank Treatment (Top 3 Reviews)
  • 5 Different Types of Residential Septic Systems (and the Advantages and Disadvantages of Each) Home Remedies for a Clogged Septic Tank (Also Including Maintenance Suggestions)

How to Locate Your Septic Tank Field Lines

Here is a list of strategies and procedures you may use to locate the lines that drain into your septic tank’s drain field.

Find the Drawings

Reaching out to your local health agency is the most reliable means of locating your septic tankfield lines. It is their policy to keep a dossier on every septic system that has been installed with a permit. Of course, if your system was not constructed with a permit, you will not be successful in this endeavor. It will be possible to see the layout, position, and every aspect of your drain field thanks to the drawings. Typically, they will mail you the drawings that you have requested. You can also get in touch with the contractor who did the septic system installation or the former owner of the house for further information.

The Grass is Much Greener…

It is expected that your drain field would absorb up nutrients and water from the surrounding soil. In other words, your drain field will be a lot greener and healthier piece of grass than the rest of the surrounding landscape. The type of cues you use to locate your drain field will be determined by your climate.

Cold Climates

If you live in a frigid region, wait until the morning when it is snowing or ice. It’s possible that your drain field will be the first to melt.

Warmer Climates

Because of the warmer environment, it is easy to locate the drain field. For a few days, refrain from watering your yard. With the exception of your drain field, you’ll observe that the majority of the grass begins to wither.

Check for Ports

A large number of septic systems are equipped with monitoring ports and clean-outs. These ports will be white tubes or pipes with a cap on them that will protrude from the ground in your yard. These apertures allow the homeowner to monitor the amount of water in the drain field without having to dig up the drain field. For you, it serves as an indication of the exact location of your drain field! Because these ports are often cut quite near to the ground, it may take some research to locate them.

These ports will direct you to the correct location.

Check Google Maps

You might be able to locate your septic tank field lines using satellites if you live in certain areas. Consider the following example: when we look at our home from a satellite view on Google Maps, we can clearly see where our drain field is located.

Parallel lines, darker grass, and small depressions are all things you could notice. Using this zoomed-out, bird’s eye perspective, you will be able to inspect the area for anomalies.

Consult a Professional

You want to avoid wasting time and money, but there are occasions when consulting with a professional is the best course of action. Identifying your lines will be more difficult if they are hidden between the rocks of a rough terrain. Echolocators can be brought in by the professionals to pinpoint the exact placement of your field lines. Depending on the reason you’re seeking for your field lines, they may also be able to assist you with other chores.

Check the Distribution Box

Distribution boxes are the parts of the system that come before the drainage lines. That is to say, if you can locate the distribution box, you will be one step closer to locating your field line connections. Begin your search a few feet downstream from where your septic tank is located (assuming you know where that is). Remove a lid if you find one that can be removed. It is through this cover that you may have access to the ports and pipes of the distribution box. This implies that simply lifting the lid, you will be able to see your drain lines in their actual form.

Use Your Septic Tank

Knowing where your septic tank is, you can use a little intuition to locate your drain field if you know where it is. Our post on how to locate your septic tank can be found by clicking here. The most crucial thing to remember about your output port is that it is parallel to your intake port. The output port will, to a greater or lesser extent, orient you in the direction of your field line. At the very least, it will assist you in locating your distribution box, which will direct you to the field lines.

Check for Moisture

Using a little intuition, you can locate your drain field if you know where your septic tank is situated. Find out how to locate your septic tank by reading this guide. Your outlet port should be parallel to the inlet, which is a crucial fact to remember while installing your device. In most cases, the outlet port will lead you in the general direction of your field lines. In addition to assisting you in locating your distribution box, which will ultimately bring you to the field lines,

Understand the Size of Your Field

The size of your drain field will be determined by the amount of water you use and the size of your property. When you’re searching for anything, it’s frequently beneficial to keep in mind how broad your field is. It’s possible that huge area of green grass in the distance is your drain field.

You Might Also Like…

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis.

It is impossible to perform maintenance operations, however, if you do not know where the tank is located. You can identify your septic tank by following a few simple procedures, which are outlined here.

Steps to follow to locate your septic tank and drain field

The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.

  • If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
  • This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
  • Simply look for possible access coverings or a structure that might be concealing it.
  • These pumps are used to remove waste from the building.
  • It is supposed to be connected to the sewage output pipe.
  • As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall.
  • As a result, it is probable that the tank will be positioned around the corner from the building.

Tips for locating your septic tank

Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.

  • It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
  • Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Prevent being overly harsh with your shovel in order to avoid causing harm to the pipes. Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

Depending on whether the septic tank is above or below ground, you may have to dig to get at it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to round to rectangular. Ideally, the lid should be within three feet of the ground level, which is where most new septic tanks would have their lids positioned in the middle. But depending on a variety of things, such as farming and other human activities on the property, it is likely that it will be deeper.

Additionally, you may use a tiny steel rod to probe the earth in order to pinpoint exactly where the tank is located as you dig farther down.

Conclusion

You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.

Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.

Find Septic soakaway / drainfield location using documents

  • Send in your question or comment regarding septic tank and drainfield records, sketches, or diagrams that demonstrate component placement – utilizing documented information to locate the septic system
  • And

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Using records to locate a septic drainfield or soakbed is described as follows: How to get records and revew papers in order to locate a septic tank, drainfield, or soakaway bed in a home or business. How to request paperwork that can document the septic system design “as approved” as well as that which was “as built” is explained in detail.

See also:  How To Connect Electric Post To Septic Tank? (Correct answer)

We also have anARTICLE INDEX for this topic, and you can use the SEARCH BOXes at the top and bottom of the page to obtain the information you need quickly and easily.

How to Use Septic System Records to Find the Drainfield – Whom to Ask – How to Find the Septic Leach Fields – Part 3

When it comes to septic systems, understanding where the drainfield is may be difficult because they are often underground systems. Finding the drainfield can be difficult because they are usually hidden. Because haphazard excavation by hand is extremely time-consuming and because haphazard excavation by backhoe can cause unnecessarily extensive damage to both a septic system and a homesite, drawing a sketch of the location of a septic tank, distribution box, and drainfield trenches or pits is a valuable document to prepare and keep with a home.

  • Ask the owner if they have any sketches to leave with you; if they don’t have any sketches but know where the septic components are, walk the property with them and produce your own sketch of the septic components.
  • Because anybody seeking for the system in the future is likely to start by locating the point where the sewage line exits the building, a former service worker or contractor understood it was a dependable location to leave a sketch.
  • In certain cases, even though septic system and drainfield layout drawings have been submitted, it is possible that the “as built” drain field will not be identical to the plan filed since blockages might be identified during the drain field installation process.
  • The septic tank’s center may be located using the simple but accurate measurement triangle depicted in the diagram below.
  • It is not need to be visually appealing, to scale, or costly.
  • Never rely on the local health agency or the building department to have drawings that show where the fields are located precisely.
  • During our investigation, we discovered that one municipality had purposefully destroyed 50 years’ worth of septic and other construction plan records because they were tired of being pestered by residents who wanted that information and then complained when it turned out to be incorrect.
  • Speak with contractors who are listed under the categories of Excavation, Plumbing, and Septic System Service since the excavator who has installed or worked on the property of your concern may be classified under one of those categories but not all of them.
  • This article series, as well as our accompanyingSEPTIC LOCATION VIDEO, demonstrates how to locate the leach field or drainfield section of a septic system by going around a site with a camera.

(Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.)

Reader CommentsQ A

@Joseph Coburn, please display the records regarding your septic system. Yes, Joseph, I’d be delighted to assist you in locating the leach bed on your property: Simply follow the “how to identify the drainfield” techniques and procedures outlined in the articles listed above under “Recommended Articles” labeled “How to Find the Drainfield.” LOCATION OF THE SEPTIC DRAINFIELD – BEGIN HERE PRECISE DRAINFIELD PIPE LOCATION – follow these procedures if you need to be precise with your drainage pipe location.

  1. More drainfield choices and approaches are available, including: It is necessary to excavate in order to locate drainage fields.
  2. REMARKING DRAINFIELD LOCATIONS OUT OF THE BOUNDS OF THE POSSIBLY UNLIKELY CLUES FROM THE VISUAL WORLD LOCATE THE DRAINFIELD VIA VISUAL INSTRUCTIONS LOCATE THE SEPTIC TANK IN ORDER TO FIND THE LEACH BEDS LOCATE @Dan Dyer, thank you for your comment.
  3. also have a look at the comments on your identical post at The location of my drain field has been discovered, and I need to figure out where the rest of it is before I can proceed to complete the task on time.
  4. As well as this, see THE LOCATION OF THE SEPTIC TANK AND THE LOCATION OF THE SEPTIC D-BOX Attempting to locate a septic system Septic drain field is located at 13368 East 49th Drive in Yuma.
  5. I’m looking to discover if there is any public information on a septic tank located at 5391 Hollis Goodwin rd.
  6. Continue reading at an SURPRISING DRAINFIELD LOCATIONALITY Select a topic from the closely-related articles listed below, or browse the entireARTICLE INDEX for more information.

Septic Drainfield Location Articles

  • Clearance Disturbances, Septic System
  • Odors, Septic or Sewer
  • Locations of Septic Components
  • Septic Drainfield Inspection Test at Home
  • Septic Drainfield Location
  • Septic Drainfield Inspection Test at Work
  • LOCATION OF THE DRAINFIELD PIPE, EXACT
  • EXCAVATE TO LOCATE THE DRAINFIELD
  • REASONS FOR LOCATION OF THE DRAINFIELD
  • Recordings to LOCATE the DRAINFIELD
  • SURPRISING DRAINFIELD LOCATIONS
  • UNLIKELY DRAINFIELD LOCATIONS
  • VISUAL CLUES LOCATE the DRAINFIELD
  • VISUAL CLUES LOCATE the SEPTIC TANK
  • SEPTIC DRAINFIELD RESTORERS
  • SEPTIC DRAINFIELD SIZE
  • SEPTIC DRAINFIELD SHAPE
  • SEPTIC TANK, HOW TO FINDfor information on locating the septic tank, chamber, drywell, or seepage pit
  • SEPTIC DRAINFIELD RESTORERS
  • SEPTIC TAN SEPTIC VIDEOSon the location of the septic system

Suggested citation for this web page

It is necessary to keep records in order to locate the drainfieldDatInspect A pedia.com- online encyclopedia of building environmental inspection, testing, diagnosis, repair and guidance on issue avoidance. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: Septic tank location may be made much easier with the use of many instruments. To locate your septic tank, you only need to know the following information.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

  • Immediately adjacent to your well
  • Beneath your home
  • Directly against your home
  • For example, underneath your driveway
  • Under trees
  • And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

  • Your water well, if you have one (for a variety of reasons that are rather clear)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

Your water well, if you have one (for a variety of reasons that are quite self-explanatory); Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built); any paved surfaces (it won’t be under a driveway unless it was added after the home was built and no one performed a proper inspection before it was built); any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one conducted Landscaping that is distinctive;

  • If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
  • Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center. Some localities make these records public on the internet, whereas others do not.

What to Do Once You Find Your Septic Tank

If everything else fails, checking the public records for your property will most likely reveal where the tank is located. Your builders most certainly secured a permit for your property because septic systems are required to be installed by law. That means they had to draw out a thorough plan showing your property as well as the exact location where they intended to construct the tank. This is done in order to guarantee that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of it being in the neighborhood.

Even without getting in the car or visiting your local records office, you might be able to locate the original building documents for the property you’re looking for.

Leave a Comment

Your email address will not be published. Required fields are marked *