Can You Move Your Septic Tank To Where Your Septic Repair Is? (Solved)

It is possible to relocate your septic tank system, but it’s essential to do it correctly. Here are some things to keep in mind. Moving your septic tank system does not just involve moving the tank. Therefore, it’s crucial to contact a company that specializes in relocating septic tank systems.

How difficult is it to relocate septic tank?

Septic systems can be difficult to maneuver, and many people find that it is easier to simply purchase a new one rather than move an old one. Sometimes this can be the appropriate choice, as older tanks, particularly concrete ones, have a tendency to fall apart when they are moved.

How do you move a septic field?

Relocate the entire system. First, dig the new hole for the septic tank, the ditches from the home and from the tank to the field lines, as well as the field lines. Have the septic tank pumped out, then relocated to the new hole. Install new piping from the house to the tank, and from the tank to the field lines.

How much does it cost to move a septic tank Ireland?

Planning permission for moving the septic tank/treatment system and percolation area into the new position, costing about €400 – €750. /and that’s out side the actual cost of the system itself.

Can you move a septic leach field?

Yes, definitely. If you want to relocate your septic tank, the first thing you need to do is contact a certified septic system professional. The process of moving a tank can be very time consuming for untrained personnel.

How much does it cost to move a leach field?

Although costs vary according to the size of the leach field, soils and costs of local permits, expect to pay between $5,000 and $20,000 for leach field replacement. It is the most expensive component of the septic system.

Can you build over a septic tank?

Building over septic tanks It is never recommended to build a structure over any portion of your septic system. No permanent structures should be built over any portion of the system, but at least in this case the homeowner can pump out their septic tank.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How far does a pool need to be from a leach field?

Installing an inground pool has greater restrictions and will probably need to be installed at least 15 to 25 feet away from the septic tank or leach lines, depending on your county’s code requirements.

Can you put an above ground pool over septic?

Above-Ground Pools and Septic Systems Pool Buyer Advice says it is possible to install above-ground pools when there are septic tanks in the ground in the same yard, but the key is that the pool must be at least 15 feet away from the system. Look for the main sewer line that connects to your septic tank.

Do you need planning permission to move a septic tank?

The short answer is yes. You will need planning permission from a local authority in order to have a septic tank installed, no matter if it’s at your own home or on a business site.

How far does a septic tank have to be from a boundary?

Legally you should ensure that your septic tank is 15 metres away from another property which will help you avoid placing a tank too close to any fencing.

How far should a septic tank be from a house?

Most importantly, a septic tank must be at least seven metres from a house, defined as a ‘habitable property’. Septic tanks are built underground and release wastewater slowly into the surrounding environment. For this reason, they must be a set distance away from a home.

How much does it cost to replace lateral lines?

FULL REPLACEMENT If you need to get part of the lateral replaced, you will pay between $50 and $200 per linear foot. If you need to get a small piece of the sewer lateral replaced, that will be between $3,000 and $6,000. For sections longer than 50 feet, the cost will be between $5,000 and $13,000.

Can a Septic Tank Be Moved?

Even though septic tanks are a common part of practically every property, finding them is a challenging undertaking. Because the tanks are hidden underground, many individuals do not even know where their septic systems are located if they do not have the luxury of risers to guide them. It’s likely that because of its position, you believe it would be nearly hard to relocate your own tank to another part of your property. In this case, however, there are firms accessible to you that would be more than happy to assist you in the completion of this specific task.

The Basics of a Septic System

You should get familiar with some general knowledge before attempting to grasp how a tank is transported. Generally speaking, a septic system is composed of four essential components:

A sewage treatment system

It is a conduit that connects your house to the tank. There is a drainfield. Soil that is capable of removing microorganisms from wastewater

The tank is buried beneath your property and can be constructed of concrete, fiberglass, or polyethylene materials. It passes via the pipe that is linked to your home and collects in the tank. It retains the wastewater for a long enough period of time to allow the particles to partially breakdown and create sludge. Afterwards, the water drains from the tank and into the drainfield, where it is treated by the soil. This enables for the removal of potentially dangerous bacteria and viruses from wastewater.

Uncovering the Tank

You should call a maintenance agency that specializes in septic tank relocation if you wish to move your septic tank. The qualities of your property will allow a competent business to assess the best location for a system to be installed on your property. After a suitable place has been identified, the tank may be moved in the traditional manner to that area. Most newer septic tanks come with risers and manholes, which are useful for cleaning. The manhole covers must be removed from the ground before the tank can be lifted out of the earth.

As the employees approach closer to the top of the tank, they will switch out the excavator for a regular hand-shovel, which will avoid any surface damage to the tank from occurring.

Removing the Tank

The procedure of raising the septic tank out of the ground may begin when the earth has been removed and the lines have been disconnected. A bar is attached into the lifting eyes of the tank, and cables are used to slowly raise the tank from its resting position. Suction is frequently experienced at the bottom of the tank, and this suction can be far stronger than the effort needed to elevate it. Lifting the tank should only be done in modest steps at a time. Moreover, if it is elevated too quickly, the suction might do significant harm to it.

Relocating the Tank

When the tank is removed, the measurements of the tank will be calculated, allowing for the excavation of a hole that is the proper size for the tank. Following its lowering into the new site, the inlet and outlet pipes will be linked to complete the installation. After that, the dirt is compacted with the help of a mechanical compactor, and the manhole covers are reattached.

It is important to maintain a safe distance from the employees during the duration of the relocation operation; The septic tank is a massively hefty equipment, and getting too close to it would be extremely dangerous.

Accomplishing a Seemingly Impossible Task

Despite the fact that septic systems can be difficult to transfer, many individuals feel that it is more convenient to just acquire a new one rather than relocate an existing one. The use of a moving truck can be a suitable option in some situations because older tanks, particularly concrete ones, have a propensity to fall apart when transported. The tank must be moved in a variety of situations, however not all of them are urgent. It is possible that you will need to relocate your tank due to new construction on your property or landscaping work, to name a few examples.

The employees of such a firm are well-versed in the art of quickly transporting your tank from one location to another while utilizing the appropriate equipment.

Simply contacting a professional provider will allow you to be supplied with the resources necessary to complete a work that you previously believed to be insurmountably difficult.

Can a septic tank be moved?

Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Finding out the exact position of your septic tank system is one of the most critical first tasks in any significant repair or remodeling project on your home or commercial property. Determining whether or not you can and should relocate a septic tank is another important first step.

A critical component of any large remodeling project on any property is the thorough evaluation of whether you require a new or additional septic tank (which is likely due to the installation of more structures) or whether you can simply move the old one (for revamps in landscape or floorplans).

Is it possible to relocate a septic tank?

If you want to move your septic tank, the first step is to get in touch with a licensed septic system specialist that is experienced in this specific technique.

The procedure of exposing the septic tank, removing the tank, and transferring it is a highly complex one that requires specialist equipment.

After a suitable location has been identified, the tank can be moved in accordance with the established procedure. Before you can comprehend how a septic tank is relocated, it is necessary to educate yourself on septic tank systems and its essential components, which are as follows:

The septic tank
A line that travels from your house to the tank
And the septic tank. a drainfield

Soil that is capable of eliminating microorganisms from wastewater

Your septic tank is buried beneath your property and is built of concrete, fiberglass, or polyethylene, depending on the material. Wastewater passes through the pipe that runs from your home and into your tank, where it settles and becomes a liquid. The septic tank is designed to store wastewater for an extended period of time, allowing the solid wastes to breakdown and transform into sludge. When the wastewater is finished in the tank, it is discharged into the drainfield, where it is treated by the soil.

Septic tank systems take up a significant amount of floor area in the home.

It’s also important to remember that old concrete septic tanks that have rusted would likely disintegrate and will not be able to sustain the relocation process.

Keep in mind that relocating a septic tank is a substantial task that necessitates the use of excavation and heavy machinery.

How to Move a Septic Tank

Ideally, specialist abilities as well as heavy equipment are required for moving a concrete sewage treatment plant. The following is a step-by-step description of the process of transferring a septic tank. This information may be useful in determining whether you would want to carry out the relocation yourself or whether you would be better served by hiring professional moving assistance.

A septic system maintenance provider should be hired to remove all wastewater and organic debris from your current septic tank
The earth above the septic tank should be excavated, ideally using an excavator, to ensure that the tank is properly functioning. As you approach closer to the tank, use a shovel to remove the top of the tank. This is done in order to prevent damage to the tank. The manhole covers on the manhole risers must be removed and placed in a safe location. Making use of a PVC pipe saw, disconnect or cut the inlet and outlet pipes that are connected to the tank. Excavate down to the septic tank’s base on both sides with an excavator. Keep the excavator bucket at least 6 inches away from the tank’s sides and shovel by hand as close to the tank as possible in order to avoid damaging the tank. Attach the lifting bar from the tank truck’s boom to the lifting eyes on the septic tank in a safe and secure manner. Ascertain that the bar passing through one eye is pushed all the way through to the lifting eye on the other side of the tank
And Lift the tank gently and cautiously with the help of the wires. It is important to note that there will be a suction at the base of the septic tank that can be much stronger than the truck’s lifting power when this happens. Lift with modest amounts of force until the suction breaks away, allowing the tank to be freed from its holding. Remember that raising the tank too quickly and with excessive force might cause harm to the septic tank or to the tank truck itself. Stack the removed septic tank solidly on the flatbed section of the tank truck

Ideally, the new septic tank hole has already been dug to the proper dimensions for the septic tank
Before lowering the septic tank into the new tank hole, park the tank truck immediately close to the new excavation. In the tank, insert the inlet and outlet pipes into the appropriate inlet and outlet holes. Check to see that the pipes do not interfere with the baffle on the interior of the tank. Fill up the tank completely with the earth that was removed
Ideally, a mechanical soil compactor should be used to compact the backfill in 6- to 12-inch intervals. Restore the manhole covers on the manhole risers to their original condition.

The Cost of Moving a Septic Tank

To maintain your current septic system, it is recommended that you hire a firm to remove all wastewater and organic debris from it. In addition, the dirt above the septic tank has to be removed, which is best accomplished using an excavator. With each step you come closer to the tank, shovel the top off by hand. To keep the tank from being damaged, please follow these guidelines: removing and storing manhole covers that have been installed on manhole risers. Using a PVC pipe saw, cut or disconnect the inlet and outlet pipes that are connected to the tank.

Keep the excavator bucket at least 6 inches away from the tank’s sides and shovel by hand as close to the tank as possible in order to avoid damaging the tank; Attach the lifting bar from the tank truck’s boom to the lifting eyes on the septic tank so that it is as secure as possible.

Slowly and gently raise the tank with the help of the wire system.

Take little steps forward until the suction breaks away, allowing the tank to be freed.

Place the removed septic tank squarely on the flatbed portion of the tank truck; ideally, the new septic tank hole has already been excavated to the proper dimensions for the septic tank; and Prior to lowering the septic tank into the new tank hole, park the tank truck immediately next to it and close to the site.

The backfill should be compressed in 6 to 12-inch intervals, ideally with a mechanical soil compactor.

Can You Build Over an Existing Septic Tank?

A conventional septic system is comprised of four primary components: a pipe leading from your home, a septic tank, a drainfield, and the soil around the drainfield, among other things. The intake pipe transports wastewater from your plumbing system and into your septic tank, where it is treated before being discharged to the drainfield, where it is treated again. Toxic waste materials are eliminated from wastewater before it is slowly discharged back into the environment as runoff. The septic tank and the drainfield are the two of these four components that should be treated with special care throughout any restorations or remodeling work since they are the most susceptible to damage or disruption.

Pumping and maintaining your septic tank will be extremely tough if you construct a structure over it.
When compared to a septic tank, a drainfield utilizes the soil in its vicinity to treat effluent that is discharged from the tank.

This is before taking into consideration the fact that you would be building on top of a sewage water collection system, which is quite unclean.
If you do not have a fully-functional septic system in your house or firm, it is practically difficult to exist.
The relocation of your septic system takes expert knowledge and heavy-duty equipment to complete successfully.

Local Septic Pumping, Repair, and Installation Service Providers may be found in our State Directory.

What’s the Cost to Move Septic Tanks?

The procedure of relocating a septic tank is time-consuming and difficult. It is typically expensive, and it necessitates the use of qualified staff to ensure that it is done correctly. As a result, it is exceedingly unlikely that anyone will do this activity unless it is absolutely required. People sometimes need to modify their houses, which necessitates the relocation of their septic tanks. Additionally, we’ve observed instances in which the tank was installed on an incorrect soil type. It is vital to replace it in such situations for the sake of safety and to maintain it running properly.

The Estimated Costs of Moving a Septic Tank

Now that we’ve reached the stage where we’re 100 percent certain that transferring the septic tank is the best option, let’s have a look at the following steps and how much they typically cost on average. This is a large-scale project that is best managed by experienced construction professionals. It is, nevertheless, critical to be aware of the average expenses associated with the project in advance. As a result, improved financial planning is naturally possible. Additionally, this estimated estimate may aid you in selecting a contracting business that is more in line with your expectations.

Contracting tasks are no different than any other service in that there are higher and lower pricing tiers. Special projects, such as this one, need a greater level of skill and are frequently priced at the higher end of the spectrum.

Inspection and Design Fees

An engineer or other specialist must inspect the site before a shovel is placed in the ground. A thorough evaluation of the present septic tank, the proposed location for its relocation, and the drain field should be carried out. These costs range between $500 and $1000. An additional component of the system design is the performance of a soil test. The new location must be prepared in advance of the transfer, and this begins with establishing whether or not it is capable of supporting a tank.

Soil testing is a highly specialized technique that typically costs between $100 and $2,000 each sample.

Getting the Necessary Permits

When it comes to home remodeling, there is a lot of red tape. Septic tanks are regulated by the local health authority, which is also involved in the process. The permissions that are required cost between $200 and $500. In many cases, the cost of many inspection visits by government personnel is included in the total cost. During the course of building, they would require access to the site on three separate occasions. Normally, you’d have the option of processing all of the paperwork yourself or delegating the task to the contractors to approach the appropriate officials.

Emptying the Septic Tank

First and foremost, the septic tank must be entirely emptied before it can be moved. In most cases, pumping out your septic tank is a normal activity that should be done every three years. The cost of this stage ranges between $250 and $600 dollars. Depending on a number of circumstances, including:

The size of the tank

The distance between the tank and the nearest dumping location
The dumping costs
The basic fees for the pumping service

The Excavation Process

This level consists of a number of tasks. It all starts with physically removing the soil till the tank is finally reached. The heavy gear is brought in next, with the goal of removing the earth from surrounding the tank and the tank itself. It is important to maintain approximately six inches of open space between the septic tank and the excavation bucket throughout the excavation process. This is done in order to ensure that the tank remains intact. Manual shoveling of the leftover soil is possible.

The procedure is plainly time-consuming and requires a large amount of personnel, machinery, and resources.

Moving the Tank

The tank is gently raised on top of a flatbed and then delivered to its final destination. It is then transferred to the new location. The remainder of the procedure is identical to that of a standard septic tank installation. The expenditures of this phase are frequently included in the overall cost of the excavation project.

Removing the Old Piping and Installing New Piping

The old pipes, as well as the tank, should be removed during the excavation process. If they’re in decent shape, they could be able to be repurposed at the new site.

If this is not the case, a fresh batch will need to be ordered. The cost of installing pipes ranges between $700 to $1200. According to the condition of the original pipes and the distance in linear distance between the home fittings and the septic tank.

Installing Other Fixtures

There is a large list of other goods that must be purchased in order to establish a septic tank. With an interior control panel, numerous warnings for pump or leakage failure and automated switches, you can keep track of everything. Risers are necessary for keeping the system in good working order, but they are not inexpensive. In addition to all of the electrical connections and the associated labor expenses, there are other expenditures to consider.

Preparing the Drain Field

It takes time and money to construct a septic tank, and there are several elements to consider. With an indoor control panel, numerous warnings for pump or leakage failure and automated switches, you can make your life easier. They are necessary for keeping the system in good working order, but they are not inexpensive. All of the electrical connections and the labor charges that go along with them are in addition to the initial investment.

Landscaping Costs

Because of the amount of soil left behind after removing the septic tank from its previous location and replacing it with a new one, It is preferable to clear the land of all garbage and rocks, plug up any gaping holes, and then restore the area to an aesthetically acceptable state of cleanliness. You could have other ideas for your yard, such as putting in a swimming pool or creating a patio. In this case, the prior use of the property should be taken into consideration. Septic tanks might develop problems from time to time.

If this is the case, you will need to treat the soil before moving on.

They will be heavily influenced by the type of renovation project you have in mind.

Final Thoughts

Is it preferable to relocate a septic tank or to have a new one installed? It is possible to spend anywhere from $4000 to $15,000 on the installation of a fresh new septic system. The tank itself ranges in price from $725 for a 500-gallon Polyethylene tank to $2660 for a 1500-gallon Fiberglass tank, depending on the size. A significant amount of money is spent on the tank’s transportation, which far exceeds the cost of the tank itself. The procedure of transferring a septic tank should always be properly researched and carried out only after all other options have been exhausted.

Is it possible / reasonable to move a septic tank?

@Daniel Holzmanno does not need to be that condescending. The poster appears to be attempting to plan things out so that if they are able to move the tank, they will have ideas and know what possibilities to check into before moving further. We shouldn’t berate those who want assistance from us. The OP is aware that there is a possibility that he will be unable to maneuver his tank. When he says he will call EV, he is implying as much. It is not a valid justification for him to ignore the possibility of not being able to move the tank and to seek advice from persons who have moved tanks in the past about the best approach to move the tank just in case.

That was an excellent question, in my opinion.
I have no idea, and it appears that he also has no idea.
There’s nothing wrong with it.

If he has a specific notion of how he wants to go about it, he can approach them and ask if it is an option.
When the OP publishes something, someone comes along and does something (in this example, another user published a post that appeared to indicate that they hadn’t read something) and no one seems to notice.
@blackdirt, Here’s what I’d suggest.

Everyone is so preoccupied with the possibility that you will not be able to transfer the tank that they fail to see that you are asking for the best ways to move it / go about this procedure and what to check into IN THE EVENT that you will be able to move it.
Perhaps you could convince people that you have permission to move the tank and drain field and then seek for their input on how to proceed with the project.
You now have enough information to know where to begin looking and to assist with planning.

After lurking on this topic for quite some time, I decided to register to answer this question because I wanted the original poster to know that some regions will allow you to transfer it.

However, it has only resulted in individuals being enraged as a result of misinterpretation. We must work together in order to be of assistance and to receive assistance.

How to Move a Septic System to Put in an Inground Pool

The fact that @Daniel Holzmanno is so disrespectful is beyond comprehension. If the poster is correct, they are attempting to prepare ahead so that if they are able to relocate the tank, they will have ideas and know which possibilities to consider. Individuals who want assistance should not be belittled. Ahead of time, OP understands that there is a possibility that his tank will be unable to maneuver. When he indicated he would call EV, he was implying as much. Although it’s possible that he will be unable to move the tank, it shouldn’t prevent him from looking into alternative solutions and consulting with experts who have moved tanks in the past for recommendations.

That was an excellent question, in my opinion.

I have no idea, and it appears that he has no idea either.
It’s not going to hurt anything either way.
It is possible for him to approach them with a specific plan in mind and ask if it is an option.

When the OP publishes something, someone comes along and does something (in this example, another user published a post that appeared to indicate that they hadn’t read something) and no one seems to notice or care.
@blackdirt, What I would suggest is as follows: Unfortunately, I don’t believe you will receive any responses to your query inside this discussion forum.
Unfortunately, I must propose that you post in another thread and load your question there.

Perhaps you could convince people that you have permission to relocate the tank and drain field and then seek for their input on how to proceed with the project.
If people aren’t going to read what you’re asking here and then accuse you of not reading, you really don’t have an option but to go to that tactic.

However, it has only resulted in individuals being enraged as a result of a misunderstanding. Together, we may be of assistance to one another as well as provide support to one another.

Step 1

Why does @Daniel Holzmanno feel the need to be so rude? The poster appears to be attempting to plan things out so that if they are able to move the tank, they will have ideas and will know what possibilities to check into. We should not berate those who seek assistance. The OP is aware that there is a possibility that he will not be able to move his tank. When he stated that he would contact EV, he implied as much. Just because there’s a potential he won’t be able to move the tank doesn’t mean he shouldn’t look into alternative solutions and consult with experts on the best approach to transfer the tank just in case.

That was a thoughtful question, in my opinion.
I’m not sure, and it appears that he isn’t either.

It’s not going to hurt anything.
If he has a specific concept of how he wants to go about it, he might inquire as to whether or not it is an option.
When the OP publishes anything, someone comes along and does something (in this example, another user posted a post that seemed to be unread) and no one seems to notice.

@blackdirt, Here’s what I’d recommend.
Everyone is so preoccupied with the possibility that you will not be able to transfer the tank that they fail to see that you are asking for the best ways to move it / go about this procedure and what to look into IN THE EVENT that you will be able to move the tank.
Perhaps you can convince folks that you have permission to relocate the tank and drain field and then ask for their input on how to proceed with the project.

You now have the necessary information to determine where to begin looking or to assist with planning.
After lurking on this topic for quite some time, I decided to register to answer this issue because I wanted the OP to know that some regions will allow you to transfer it.
We must collaborate in order to be of service and to receive assistance.

Step 2

The plumbing connecting the tank and field lines should be rerouted. This is the most straightforward problem to tackle. Removing the existing pipe and digging a new ditch around the pool area until it reaches the field lines are the next steps. If you are traveling a long distance, the additional distance or change in slope may necessitate the installation of a pump in your septic tank.

In this situation, just a 2-inch pipe will be required to connect the tank to the distribution box. To power the pump, you’ll also need to provide electrical power to the septic tank from somewhere else.

Step 3

Move the field lines to their proper locations. Alternatively, if the tank can be left in place but the field lines must be relocated, this will necessitate more labor and supplies. Mark the position of the new field lines with a pencil, and then dig the ditches using the backhoe. The new field lines must be the same size as, or somewhat bigger than, the old field lines. Backfill the ditches with fresh gravel, perforated pipe, and a geotextile material when they have been installed. Installing a new distribution box and routing the line from the tank to the new distribution box will also be required in this project.

Step 4

Move the complete system to a new location. Start by constructing a new septic tank, ditches leading to and from the tank, and field lines, all of which must be completed before the field lines can be installed. Prepare to have the septic tank emptied out and then moved to the new location. Installation of new pipe from the home to the tank, as well as new piping from the tank to the field lines Install field lines that are the same width and length as the current field lines on the field. Old field lines, gravel, and PVC piping can be left in place, with just the materials that will be immediately impacted by the pool construction needing to be removed.

Tip

Install the drain for your swimming pool away from the septic system to avoid contamination. It will be necessary to empty your pool from time to time. As soon as this happens, divert the water as far away from the septic system as you possibly can. The introduction of that much water into your septic system at once might be extremely hazardous, resulting in backups and even system collapse in certain cases.

Cost of moving a septic system

Septic systems, which include of the septic tank, pump chamber (if necessary), drain field, and any necessary reserves fields may consume a significant amount of land when constructed properly. formatting a hyperlink So, when homeowners’ objectives and requirements shift, the subject of whether or not to relocate their septic system arises from time to time, as well. In many cases, the construction of an in-ground pool will cause interference with the current drain field layout or the position of the septic tank.

We recommend receiving at least three quotes/estimates from respected area contractors before making a final decision.

Even if the contractor offers such services, little but crucial activities such as collecting construction licenses and existing as-built drawings, as well as interacting with local health and other municipal authorities, are best handled by the homeowner.
Drain fields may span enormous areas and, in some situations, flow over into neighboring properties, so it’s important to plan ahead.
When the drain field extends beyond the boundaries of the property, the only sensible solution would be to consider relocating the septic tank while leaving the distribution box that supplies the drain field pipes in its current location.

Almost without exception, each septic relocation job will require the relocation of a system that is at least 10 years old or older.
In certain cases, it may be necessary to install a new tank rather than relocate an existing one, and the old tank will need to be drained and backfilled with sand and gravel to ensure that it does not settle.
This is especially important if the drain field is to be relocated to the old reserve field from where it was originally located.

In certain circumstances, switching from a gravity-fed to a pressure-fed septic system can reduce the amount of space required for the system while increasing the amount of flexibility with regard to where the system’s components are placed on the land.
Taking even a cursory glance at the septic mover project concerns, it is clear that this is not the sort of project that should be undertaken carelessly.
Homeowners should also plan for unexpected expenses such as bringing any part of the old system that will be reused up to code or legal expenses that may arise if parts of your old septic system are discovered on the neighbor’s property, which could result in legal fees.

Here’s an example: in a previous debate on transferring a septic system (here), the author used the phrase “formatting link.” As a result of connecting to a township sewage line that was created after his property was established with a septic system, the homeowner has discovered a solution to his problem.

Although a municipal sewer system may not be an option for everyone, keep your eyes peeled since transferring a septic system is exactly the type of home repair operation that needs having a backup plan in case the first one fails.

Cost of moving drain field / septic tank?

Greetings to everyone. When it comes to transferring a septic tank and drain field, I’m curious how much it will cost (roughly speaking). In order for me to expand the rear of my house and add a pool, the drain field/tank must be moved out of the way. I’ve looked into securing a connection to municipal or county water, but haven’t had much luck locating the necessary information. I’m just looking for some ballpark figures. My property has risen in value somewhere in the 70-80K area, so I believe it would be cost effective, but I want to be certain of the expenditures involved before proceeding.

I have contacts in the pool construction industry, and my family is involved in the construction industry.
Thank you in advance for any information you may supply.
With the scant expertise I have with that sort of work, I’d put the figure around $10,000 or more.

Even without the additional expense of an entirely new septic system, installing a pool is often a losing proposition in most areas of the nation since it never recovers even a fraction of the money spent on it in terms of resale value.
I believe that the $10K estimate for relocating the septic system is a realistic estimate.
The latter, on the other hand, is clearly going to take you far further.

Most home buyers prefer it because it eliminates all future problems associated with a septic system.
Adding a pool does not appear to be a cost-effective option based on how much your home has gained in value.
The exception is Florida, where swimming pools are quite widespread.

A lot would rely on how much you are capable of doing yourself, which is unknown because being in construction may entail anything from framing to operating a backhoe, among other things.
When it comes to accomplishing this, my first recommendation would be to connect to municipal sewer if it is accessible in your neighborhood.

Although it does have an annual fee, which I would find out before making my decision, the majority of property purchasers choose it since it avoids all future problems with a septic system.

I don’t understand how the value of your home has anything to do with the cost-effectiveness of installing a pool. In most regions of the country, installing a pool is a losing proposition from the start, since you never recover even a fraction of the money you spend on it in resale value, even if you don’t have to install a new septic system. The exception is in places like Florida, where swimming pools are relatively widespread. I believe that the $10K estimate for relocating the septic system is conservative.

The latter, on the other hand, will undoubtedly go you far further.
Most house buyers like it since it avoids all future problems associated with a septic system.
I’ve finally tracked down the individual with whom I need to speak about being connected to city/county sewage.

You’re correct, installing a pool might not be the most cost-effective investment, but I live in Central Florida, so.
In any case, this is for our own enjoyment, not for selling value.
That is around a 2300 square foot home with a pool.

I estimate that the cost of doing everything we want with the property will be in the area of 95K, and that after all of this, we will still have 65K in equity.
It is a cost-effective method of obtaining the dream home we desire.
It will be a little larger than the near neighbors, and we are aware that this will have an impact on the resale value of the property, but we are fine with that.

Russ

5 Things Homeowners Should Know About Their Septic Drain Field

There are certain distinctions in care, usage, and budgeting that you should be aware of, whether you’re a new homeowner with an existing septic system or considering about purchasing or building a home without sewer hookups. This document outlines three ways in which your budget will be affected if your wastewater is treated using a septic system. 1. You will not be required to budget for municipal sewer service. Because the municipal wastewater system normally processes all of the water, the cost of city sewage service is sometimes determined by how much water you purchase from the city.

A large number of homes with septic systems also rely on wells for fresh water rather than municipal water, which means you’ll likely save money in that department as well.
It is necessary to include septic maintenance in your budget.
Although you are not required to pay the city for the usage of your septic system, you will be responsible for the costs of maintenance if you want the system to continue to function properly.
It is possible that these maintenance and repair expenditures will build up over time, so you may want to consider setting up an emergency fund to cover any unforeseen repair bills.
You’ll also need to budget for the cost of a single inspection and begin saving for the cost of a tank pump.
Spreading the expenditures out over several months is the most effective budgeting strategy, even for an expense such as tank pumping that does not occur every year, because it allows you to better estimate the costs ahead of time.
You may need to set aside money for septic tank replacement.

The tank and leach field may not need to be replaced if you have a reasonably recent septic system and plan to sell your home within a few years.

If, on the other hand, your home’s septic system is more than a decade old, you’ll want to start looking into how much a new system would cost you as soon as possible.

For example, if the previous owners did not do routine maintenance or if the system was installed on clay soil, the system may need to be replaced.

It is a prudent decision to begin putting money aside in anticipation of this eventuality.

When you have a septic system, you may use these three strategies to budget differently.

Make an appointment with us right away if you’re searching for someone to pump out your septic tank or to complete an annual examination of your septic system. Our experts at C.E. Taylor and Son Inc. would be happy to assist you with any septic system assessment, maintenance, or repair needs.

How To Tell If Your Septic System Needs Repair Or Replacement

In most cases, homeowners and business owners who utilize a septic system do not consider about their system until there is a problem. Jones PlumbingSeptic Tank Service specializes in the installation, maintenance, and repair of septic systems of the highest quality. In order to discover whether or not you will need to replace your current system, contact us immediately to arrange septic tank services.

Common Indicators Of Septic System Repair

It is inevitable that a septic system will require repairs, and it is critical to schedule these repairs as soon as the problem first manifests itself. Hopefully, by taking preventive measures, you will be able to extend the life of your sewage treatment system.

Slow Drains

A septic system will eventually require repairs, and it is critical to schedule these repairs as soon as the problem manifests itself. You may increase the lifespan of your septic system if you take the necessary precautions.

Sewage Backups

Because the goal of drains is to transport waste away, if the waste returns in the form of backed-up sewage, you will want emergency septic service. Even while frequent tank pump-outs are normally helpful in avoiding this predicament, a sudden backup indicates that there is an issue.

Putrid Odors

If your drains are not doing their job and are backing up with sewage, you will need to call for emergency septic service immediately. However, while frequent tank pump-outs are normally beneficial in avoiding this predicament, a sudden backup indicates that something is wrong.

Common Types Of Septic Tank Repairs

The distribution box is the name given to the location where the drain field pipes link to the tank in most septic systems. The distribution box is responsible for uniformly spreading liquid waste into the pipes. If it collapses or is somehow damaged, too much or too little liquid might reach the drain field, resulting in clogging of the pipes. Depending on the age of the system, the box may be constructed of concrete, which is susceptible to deterioration by the gases that circulate inside the septic tank during operation.

Defective Septic Tank Seal

The distribution box is the name given to the location where the drain field pipes link to the tank in the majority of septic system configurations. The distribution box is responsible for uniformly spreading liquid waste into the pipes. If it collapses or is somehow damaged, too much or too little liquid may reach the drain field, resulting in clogging of the pipes. It is possible that the box is composed of concrete, which will degrade with time due to the presence of gases inside the septic tank, depending on the age of the system in question.

Damaged Pipes

An animal burrowing deep enough to reach and destroy septic tank pipes, or a vehicle driving or parking over a septic tank system, can both cause damage to septic tank pipes. Additional harm to a septic system might result from tree roots growing too close to the system.

Warning Signs Of Septic Tank Replacement

Septic tank businesses such as Jones PlumbingSeptic Tank Service know how to detect when it is time to replace a system, despite the fact that most systems endure for several decades on average.

The following are the most prevalent signals that a system needs to be replaced that we encounter.

Puddles Form In The Yard Overnight

Overnight appearances of puddles or marshy spots in the yard are classic indicators that it is time to rebuild the septic system. The most fundamental duty of any system is to transport wastewater via the drain field, where it subsequently percolates into the surrounding soil to be treated. Clogs or cracks in the pipe, as well as a damaged tank, prevent water from passing through and instead cause it to slowly rise to the top of the water.

Household Size Has Increased

The size of the tank is determined by the number of persons that routinely contribute to the septic system. If the size of your household has changed — or if you’re purchasing a property with a tank that is smaller than suggested — your system should be modified to accommodate the increasing needs.

System Needs Frequent Repairs

Just as with any other type of maintenance, there comes a point at which the expense of regular repairs outweighs the cost of replacing the system. Furthermore, a system that requires recurrent maintenance is likely to be a deteriorating system that will require replacement in the near future.

Well Water Is Contaminated

Like all repairs, there comes a point where the expense of regular repairs outweighs the cost of replacing the system. This is true for every system. Aside from that, a system that requires recurrent maintenance is typically a faulty system that will need to be replaced sooner rather than later.

Inspection Reveals An Incorrect Tank

An examination is the only method to determine whether or not your present septic tank is acceptable for your location. Unless the tank is situated at a sufficient soil depth, gravity will be unable to properly transfer waste in the majority of situations. According to other parameters such as soil structure, our professionals can decide which type of septic tank would be most appropriate for the site and your requirements. A commitment to providing high-quality service is shared by Jones PlumbingSeptic Tank Services.

We can help you restore the functionality of your septic system if it has stopped working.

How Your Septic System Works

Examination of your present septic tank is the only method to determine whether or not it is acceptable for your location. Unless the tank is situated at a sufficient soil depth, gravity will be unable to properly transfer waste in the majority of systems, which is common. Depending on other parameters such as soil structure, our professionals may evaluate which type of septic tank would be the most appropriate for the site and your requirements. Our company, Jones PlumbingSeptic Tank Services, is committed to providing high-quality service to our customers.

We can help you restore the functionality of your septic system if it has stopped working properly.

Specifically, this is how a typical conventional septic system works:

All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system.

If you are not sure, here are some tell-tale symptoms that you most likely are:

You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

The following are some methods for determining whether or not your home has a septic system.

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

Water backing up into the drains of homes and businesses
It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
A strong stench emanating from the area surrounding the septic tank and drainfield

HOW TO SAFELY ABANDON AN OLD SEPTIC TANK ON YOUR PROPERTY

If you’ve recently purchased an older house, it’s possible that a septic tank is located on the property. This is true even if your home is currently linked to the municipal water and sewer systems. A prior owner may have abandoned the ancient septic system and connected to the city sewage system when it became accessible at some time in the past. Despite the fact that there are standards in place today for properly leaving a septic tank, it was typical practice years ago to just leave the tanks in place and forget about them.

The old tank may either be demolished or filled with water to solve the problem.

It is possible that permits and inspections will be required.

They are dangerous because curious children may pry open the lid and fall into the container.

Falls into a septic tank can be lethal owing to the toxicity of the contents and the fact that concrete can collapse on top of you while falling into a tank.

Eventually, this approach was phased out due to the fact that the steel would corrode and leave the tank susceptible to collapse.

When it comes to ancient septic tanks, they are similar to little caves with a lid that might collapse at any time.

The old tank is crushed and buried, or it is removed from the site.

If it is built of steel, it will very certainly be crushed and buried in its current location.

After that, the tank can be completely filled with sand, gravel, or any other form of rubble and buried.

Tanks can either be entirely dismantled or destroyed and buried in their original location.

The abandonment has been documented and plotted on a map.

It’s possible that you’ll forget about the tank once it’s been abandoned.

As a result, you might wish to sketch a map of the area where the old tank used to stand.

If you can demonstrate that an old septic tank was properly decommissioned, you may be able to increase the value of your property, and the new owners will enjoy knowing that large chunks of concrete are buried underground before they start digging in the yard to put something in it.

It may take some detective work to discover about the history of your land and what may be lying beneath the surface of the earth.

Upon discovering an old septic tank on your property that is no longer in service, contact Total Enviro Services for propertank abandonment procedures that meet with local standards and protect your family, pets, and farm animals from harm or death.