Arizona How To Much To Add A Septic Tank? (Question)

Installing a new conventional septic system can cost from $4,000 – $5,000+/-. Alternative systems may cost in the range of $10,000 – $20,000… or more. In Arizona, an estimated one of every five households is served by some type of onsite wastewater system.

  • Average tank installation – $2,700 to $8,000 Septic tank – $600 to $1,000 Anaerobic system – $2,000 to $5,000 Aerobic system – $10,000 to $20,000 House and gallon tank size – $600 to $3,900

Can a homeowner install a septic system in Arizona?

SITE EVALUATION – Although conventional septic systems may be installed by the homeowner if certain criteria are met, the site evaluation must be done by an Arizona- registered professional engineer, geologist, sanitarian, an appropriately licensed septic or plumbing contractor (K-41 or L-41) who has completed training

How long does a septic tank last in Arizona?

The usual design life of a septic system is 20 years.

Who pays for septic inspection in Arizona?

Septic Inspections Home Seller – Who Pays For The Septic Tank Inspection? It’s Arizona law that the seller/owner is responsible for requesting septic tank inspections in Arizona. ADEQ says that the owner/seller if the home must obtain a septic inspection.

What is the alternative to a septic tank?

Mound systems work well as alternatives to septic tanks when the soil around your home or building is too dense or too shallow or when the water table is too high. Although they are more expensive and require more maintenance than conventional systems, mound systems are a common alternative.

What is an alternative septic system in Arizona?

Alternative for Septic! Best Aerator Septic, your exclusive Arizona distributor of Jet Wastewater Treatment Plant solutions. The Jet residential home wastewater treatment plant automatically and efficiently treats your home sewage conveniently from a home control panel.

Are septic inspections required in Arizona?

The requirement to have the on-site wastewater treatment facility inspected within six months prior to property transfer is a provision of Arizona rule, and takes precedence over any conflicting terms that may exist in any contract pertaining to the property transfer.

How much is a septic transfer fee in Arizona?

The transfer fee is $50 per parcel, regardless of the number of treatment facilities on the parcel. When submitting an Onsite Wastewater Septic Treatment Facility Notice of Transfer (NOT) by mail, please complete the entire NOT form.

How much does a septic system cost in Arizona?

Installing a new conventional septic system can cost from $4,000 – $5,000+/-. Alternative systems may cost in the range of $10,000 – $20,000… or more. In Arizona, an estimated one of every five households is served by some type of onsite wastewater system.

How much is a septic inspection in AZ?

Septic Inspection Cost The cost for a visual inspection gets folded into the cost for a home inspection, which typically runs somewhere in the $250-$500 range, depending on location and home size. A full septic inspection runs somewhere in the $250-$400 range.

What is the cheapest septic tank?

Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

Is a cesspit the same as a septic tank?

A cesspit is a sealed underground tank that simply collects wastewater and sewage. In contrast, septic tanks use a simple treatment process which allows the treated wastewater to drain away to a soakaway or stream.

What is the average life of a septic system?

Age of the System It’s pretty common for a septic system to last 40 years or longer, which means if you buy a new home, you might never need to replace it. However, you might have an older home whose septic system has been in place for nearly half a century.

How much does it cost to install a septic system in Arizona?

Asked in the following category: General The most recent update was made on June 25th, 2020. The average cost of septic tank installation in Arizona is $5,036, according to the industry standard. A 1,500-gallontank would most certainly be required for a house with five or more bedrooms, and it will cost between $15,000 and $25,000 to install. It costs between $3,000 and $7,000 to replace an old septic system, depending on the size and complexity of the operation. Second, what is the approximate cost of replacing a drain field?

The septic system’s most expensive component is the sewage treatment system.

When the septic problem is resolved, the property’s value increases to the level of similar properties currently on the market.

What is the Cost of a Septic System? A-American Septic Services

What you may be thinking is “what is the price of a septic system.” If this is the case, it is likely that your septic system is malfunctioning. It is essential that your septic system be a functioning aspect of your property. When your septic system breaks, you will need to think about whether or not to replace it.

When to decide to replace your septic system

When you have a problem with your septic system, you will be aware of it. More frequently than not, you will become aware that anything is amiss before experiencing complete failure. Some of the most prevalent indications of a malfunctioning septic system are as follows:

  • Strong, foul stench
  • Clogged pipes and/or sewer backup
  • Clogged drains
  • Leach field that is wet and sloppy
  • Toilets that gurgle
  • Tubs, sinks, and toilets that are slow to drain

In certain cases, a simple repair may be all that is required. if you have sewage in your home, clean it up carefully so that you and your family do not become ill from it. If your leach field is flooded, keep children and pets away from it until the situation has been rectified. If you suspect that your leach field is deteriorating, you may need to consult with a professional septic pumper and ask for advice and recommendations. If your leach field fails completely, you may be forced to leave it and start over with a new one.

The cost of replacing your septic system

It is estimated that the cost of rebuilding a septic system will vary from $6000 to $50,000, including financing. Consider the cost of the tank, the interest on the loan, labor expenses, and landscaping when determining whether or not to replace your system. The cost of a new system or a replacement can quickly escalate in price because to the high demand for new systems.

Some of the septic system costs:

The expenses associated with a complete septic system replacement can be quite high. Carry out some study and determine your financial constraints. This is not something on which you should scrimp and save money.

  • Tank installation costs between $2,700 and $8,000 on average
  • A septic tank costs between $600 and $1,000
  • An anaerobic system costs between $2,000 and $5,000
  • And an aerobic system costs between $10,000 and $20,000. Costs range from $600 to $3,900 depending on the size of the house and gallon tank
  • Preparation and excavation cost between $1,200 and $4,500. Permit for construction – $400 to $2,500 (often about $1,000 or less)
  • Drainage/leach field costs between $2,000 and $10,000. Replacement of a baffle costs $300 to $500
  • Repair of a tank pump costs $800 to $1,400
  • Replacement of a tank lid costs $30 to $70. When it comes to the cost of a new tank, it will be determined by the sort of material utilized to construct the tank. Hiring a professional will cost between $1,500 and $4,000 in labor.

Make sure that your budget is well within your means.

Because the cost may be prohibitive, you may need to take out a loan to ensure that your system will survive as long as it is meant to do so.

Age of the system

It is possible that you will need to replace your septic system, not because it has failed, but because of the age of the system. The majority of steel tanks have a lifespan of 20-30 years, and they often degrade as a result of environmental causes. Plastic tanks have a somewhat longer lifespan than steel tanks, with an average lifespan of 30-40 years. Concrete tanks are the most durable alternative, since they may survive for 40 years or longer. The price of a tank will vary depending on the type of tank you purchase.

Septic Tank Installation Quote Phoenix

A-American Septic Service will assist you if you require septic tank installation services in Arizona. Call us at 602-455-3878 if you would like a free septic tank design or installation quotation now.

Arizona Septic Tank Installations

In the Phoenix, Arizona region, we are the go-to specialists for septic tank design and septic system installation. We serve the Maricopa and Pinal counties. You can rely on us to recommend the most appropriate septic system size for your new home development or business property. Based on the size of your new home, the number of bedrooms and bathrooms, and the location of your new septic tank and leach field, we’ll provide recommendations for the optimal size septic tank and leach field for your new home.

Homeowners!With any new septic tank installation, you’ll receive a Cutco knife gift with our thanks!

A large number of local builders and developers have enlisted our services to install entire septic systems for new home developments around the region. Builders! Get in touch with us for a fast and competitive septic system installation quote.

Site and Soil Testing, Certifications for Septic Systems

A large number of local builders and developers have enlisted our services to install entire septic systems for new home developments in the valley. Builders! For a fast and competitive septic system installation quote, please contact us.

How much does a septic system cost? Let’s talk480-988-1401

For additional information on alternate options to traditional septic tanks for your residential or business property, please contact us now.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,451, with an average cost of $6,804 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials cost between $600 and $2,500 without work. A complete septic system, which includes a leach field (also known as a drain field), tank, and plumbing, costs between $10,000 and $25,000, depending on the size of the system. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the material used, and the size of the tank.

The two types of systems covered in this book are aerobic and anaerobic systems. This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,804
Typical Range $3,157 – $10,451
Low End – High End $450 – $21,000

The cost information in this report is based on real project costs provided by 948 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. You may even have to pay an additional $10,000 or more for an alternative, specialized drain or leach field, depending on the size of your property, the soil composition, and the depth of your water table.Septic systems are divided into three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
See also:  How To Replace A Septic Tank Cap Look Like? (Solved)

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield.

It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Replacement of a tank lid costs between $30 and $70. Drain Field Replacement Cost: $7,500. When replacing an aerobic system, talk to your service expert about the advantages, disadvantages, and expenses of upgrading to a more efficient aerobic system.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Your septic system is responsible for disposing of everything that goes down your drains and into your toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless absolutely necessary. You should never flush the following down the toilet or pour it down the sink drain.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades.

It’s critical to have it manually inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

See also:  How Much Dose It Cost To Remove Empty Septic Tank? (Solution)

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

The installation of a septic system is a time-consuming endeavor. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs down the road. An unpermitted installation might also make it harder to sell or insure a house once it has been completed. Always interview at least three pros before making a final decision. Contact a professional septic tank installation now for a free quote on your job.

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

Check to see whether your septic system can handle any new additions. Pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or nitrite-nitrate.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
Phoenix Septic Systems CostsPrices


Phoenix, Arizona.The Phoenix Septic Systems Cost Report is a concise report on everything you need to know about the cost of septic systems in the Phoenix area.

Average Septic Systems Cost in Phoenix

We conducted some preliminary research in order to determine the typical cost of septic systems in Phoenix. The following are the average expenses and prices that have been reported to us:

Cost of Septic System Installation in Phoenix, Arizona

a set charge of $7,319.05 for a new conventional system (3-bedroom house) (range: $6,689.85 – $7,948.25) for a new conventional system Estimates from Local Experts are provided at no cost.

Cost of Septic Tank Cleaning or Pumping in Phoenix, Arizona

$267.42 fixed fee for 1,000 gallon tank(Range: $244.73 – $290.11)$360.00 fixed fee for 1,500 gallon tank(Range: $330.00 – $390.00)$470.00 fixed fee for 2,000 gallon tank(Range: $440.00 – $500.00)$0.25 per gallon(Range: $0.22 – $0.28)Free Estimates from Local ProsWas this information helpful?

Phoenix Septic Systems Cost Data

Information on the pricing of septic systems has been contributed by professionals in the Phoenix region (s). Individual reports include the following, to name a few:

Septic System Installation

$6,959.38 – $8,268.48 fixed fee for new conventional system (3-bedroom house) This is an estimated price for septic system installation. Also includes building leach field, installing concrete tank (1,000 gallon capacity), and PVC piping for conventional gravity system. Cost does not include percolation tests, mound septic systems, higher capacity tanks, tree removal, permit inspection fees, re-landscaping, or challenging topography. Reported by:ProMatcher Research Team
85026, Phoenix, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$257.80 – $303.12 fixed fee for 1,000 gallon tank Price of septic tank pumping is included. It also accounts for the cost of exposing lids, pumping out 1,000 gallon septic tank, and disposal fees. Cost excludes locating the tank, installation of risers, emergency calls, soil fracturing, and septic tank repairs. Reported by:ProMatcher Research Team
85225, Chandler, Arizona – December 4, 2020

Septic System Installation

$6,793.51 – $8,071.41 fixed fee for new conventional system (3-bedroom house) Manhours for septic system construction are included in estimate. Cost takes into account excavating, installing 1,000 gallon concrete tank (1-3 bathrooms), building a leachfield, and connecting all plumbing components. Additional charge for septic permit, engineered or alternative systems, difficult soil conditions, larger tanks, soil testing, or re-sodding. Reported by:ProMatcher Research Team
85251, Scottsdale, Arizona – December 4, 2020

Septic System Installation

$6,869.53 – $8,161.73 fixed fee for new conventional system (3-bedroom house) The cost of septic system installation is included in the estimate. Price takes into account excavation, drain field construction, concrete septic tank for 4-person household, and piping materials. Items excluded: percolation tests, mound septic systems, higher capacity tanks, tree removal, permit inspection fees, re-landscaping, or challenging topography. Reported by:ProMatcher Research Team
85282, Tempe, Arizona – December 4, 2020

Septic System Installation

$6,593.09 – $7,833.29 fixed fee for new conventional system (3-bedroom house) Includes pricing for septic system installation. Cost takes into account excavation, drain field construction, concrete septic tank for 4-person household, and piping materials. Excludes percolation tests, mound septic systems, higher capacity tanks, tree removal, permit inspection fees, re-landscaping, or challenging topography. Reported by:ProMatcher Research Team
85381, Peoria, Arizona – December 4, 2020

Septic System Installation

$6,565.45 – $7,800.45 fixed fee for new conventional system (3-bedroom house) Price quote accounts for the cost of septic system installation. Estimate takes into account building leach field, installing concrete tank (1,000 gallon capacity), and PVC piping for conventional gravity system. It excludes percolation tests, mound septic systems, higher capacity tanks, tree removal, permit inspection fees, re-landscaping, or challenging topography. Reported by:ProMatcher Research Team
85302, Glendale, Arizona – December 4, 2020

Septic System Installation

$6,454.87 – $7,669.07 fixed fee for new conventional system (3-bedroom house) Estimate takes into account the cost of septic system construction. Price does include excavating, installing 1,000 gallon concrete tank (1-3 bathrooms), building a leachfield, and connecting all plumbing components. Excludes septic permit, engineered or alternative systems, difficult soil conditions, larger tanks, soil testing, or re-sodding. Reported by:ProMatcher Research Team
85296, Gilbert, Arizona – December 4, 2020

Septic System Installation

$6,523.98 – $7,751.18 fixed fee for new conventional system (3-bedroom house) Estimate takes into account labor. It also includes excavating, installing 1,000 gallon concrete tank (1-3 bathrooms), building a leachfield, and connecting all plumbing components. Cost estimate excludes septic permit, engineered or alternative systems, difficult soil conditions, larger tanks, soil testing, or re-sodding. Reported by:ProMatcher Research Team
85201, Mesa, Arizona – December 4, 2020

Septic System Installation

$6,758.96 – $8,030.36 fixed fee for new conventional system (3-bedroom house) Manhours for septic system installation are included in this estimate. Price includes excavation, drain field construction, concrete septic tank for 4-person household, and piping materials. Excludes percolation tests, mound septic systems, higher capacity tanks, tree removal, permit inspection fees, re-landscaping, or challenging topography. Reported by:ProMatcher Research Team
85282, Tempe, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$244.23 – $287.16 fixed fee for 1,000 gallon tank Price includes septic tank pumping. Estimate takes into account excavation, lifting of up to 2 lids,and clean out of 1,000 gallon tank. Cost does not account for locating the tank, installation of risers, emergency calls, soil fracturing, and septic tank repairs. Reported by:ProMatcher Research Team
85381, Peoria, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$243.21 – $285.96 fixed fee for 1,000 gallon tank This price includes septic tank pumping. No additional charge for exposing lids, pumping out 1,000 gallon septic tank, and disposal fees. Cost does not account for locating the tank, installation of risers, emergency calls, soil fracturing, and septic tank repairs. Reported by:ProMatcher Research Team
85251, Scottsdale, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$254.47 – $299.20 fixed fee for 1,000 gallon tank Labor is included. Estimate accounts for excavation, lifting of up to 2 lids,and clean out of 1,000 gallon tank. Doesn’t include locating the tank, installation of risers, emergency calls, soil fracturing, and septic tank repairs. Reported by:ProMatcher Research Team
85302, Glendale, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$239.11 – $281.14 fixed fee for 1,000 gallon tank Labor for septic tank cleaning and pumping is included in the price. Accounts for cost of excavation to uncover lids and cleaning of septic tank (up to 1,000 gallons) Cost does not account for long-distance travel, baffle repairs, failing/broken septic tanks, and tanks over 1,000 gallons. Reported by:ProMatcher Research Team
85296, Gilbert, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$241.67 – $284.15 fixed fee for 1,000 gallon tank Price range takes into account septic tank cleaning and pumping labor. Does include excavation to uncover lids and cleaning of septic tank (up to 1,000 gallons). Cost does not include long-distance travel, baffle repairs, failing/broken septic tanks, and tanks over 1,000 gallons. Reported by:ProMatcher Research Team
85201, Mesa, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$250.38 – $294.39 fixed fee for 1,000 gallon tank Labor for septic tank cleaning and pumping is included in estimate. Cost accounts for excavation to uncover lids and cleaning of septic tank (up to 1,000 gallons). Items not included: long-distance travel, baffle repairs, failing/broken septic tanks, and tanks over 1,000 gallons. Reported by:ProMatcher Research Team
85225, Chandler, Arizona – October 30, 2020

Septic Tank Cleaning or Pumping

$251.66 – $295.89 fixed fee for 1,000 gallon tank Estimate includes labor. Cost takes into account exposing lids, pumping out 1,000 gallon septic tank, and disposal fees. Excludes locating the tank, installation of risers, emergency calls, soil fracturing, and septic tank repairs. Reported by:ProMatcher Research Team
85388, Surprise, Arizona – March 30, 2016

Septic Tank Cleaning or Pumping

$220.00 to $280.00 fixed fee for 1,000 gallon tank $0.22 to $0.28 per gallon $440.00 to $500.00 fixed fee for 2,000 gallon tank $330.00 to $390.00 fixed fee for 1,500 gallon tank Based on average market filters and type of job, urgency etc Reported by:Vanessa Spoo,A greener life
Free quotes from local septic system contractors near you.

Phoenix Septic System Contractors

A greener life17831 w. Caribbean lane, Surprise, AZ 602-738-7867
Adrains BackhoeDump Truck8215 W Acoma Dr, Peoria, AZ 623-979-5653
A Greener Life13954 west waddell road Ste 103269, Surprise, AZ 602-738-7867
Tell us how much you charge for your services and receive a free business listing.
Disclaimer:Costs and prices shown on the ProMatcher site are intended to be used as general information, not as guaranteed estimates. To obtain cost information relevant to your project, request a quote or estimate from a local service provider.

Arizona Septic Tank-Installation-Service-Pumping & Repair

Our services range from simple septic tank design to intricate alternative systems, including permits, engineering, and septic system installation. Contact us now to learn more. We are a full-service turnkey contractor that can also provide servicing once the installation is complete, if necessary. We also provide full-service septic tank pumping and septic cleaning in the following Arizona cities:Phoenix (including Scottsdale and Cave Creek), Carefree (including Anthem and Fountain Hills), Glendale (including Peoria) and Peoria (including Surprise and Waddell), Tempe (including Gilbert and Chandler), and many others.

We can handle any and all of your septic tank or waste system requirements.

We are licensed and insured by the state of Arizona.

What do I need to know about my septic tank?

We are here to answer any questions you may have concerning your septic tank, as well as to assist you in understanding how and when it should be maintained. Here are some of the most commonly asked questions we receive, to assist you in better understanding the process!

Arizona Septic Tank Services

All of our repair, inspection, and maintenance services are accessible around the clock, and we are always happy to answer any questions or concerns. We are delighted to answer any questions you may have and assist you in establishing exactly what it is that you want. Whether you require an expert immediately or simply have a question, please contact us. In addition to providing high-quality, professional septic services, we also provide services in the following areas:

  • A comprehensive septic pumping and cleaning
  • A grease trap pumping and cleaning
  • A septic tank inspection for home sales
  • Any and all necessary repairs (no matter how little)
  • Cleaning, replacement, and installation of the effluent filter are all included in this price. Therapy with enzymes
  • Treatment with roots
  • Installation of a service port and electronic position

A State Inspection Report detailing the condition of a septic system must be sent to the buyer if you are selling a property that is linked to a septic system, as required by law. For further information, please contact us. Is There a Process Going On in My Septic Tank? Your septic tank is the starting point for the wastewater treatment process, owing to the optimum circumstances that exist in the tank that allow bacteria to flourish and flourish. Almost any organic waste is consumed as food by the bacteria, which collects at the bottom of the tank as’sludge.

Lighter substances, such as oil and fat, float to the surface of the water and are referred to as’scum.’ In the clear region, which is the space between the sludge and the scum, wastewater is collected and sent from the septic tank to a treatment plant.

  • The following items are prohibited: coffee grinds, dental floss, tampon applicators, diapers, cigarette butts, condoms, bandages, fat and oil.

I’m inviting a large number of folks to stay. Is it necessary for me to be concerned about my septic tank system? A large gathering is a good time to get your septic tank repaired, as the tank might become overcrowded as a result of the high volume of people. An emergency pump service would be required, which would be both costly and stressful; instead, arrange a pump service ahead of time so that you don’t have to worry on the big day! Is it necessary for me to add more therapies to the system?

It is incredibly simple to incorporate a bacteria treatment into your system — the treatment may simply be flushed down the toilet.

This is especially handy if you have had extensive cleaning done in your home with the help of a professional.

Arizona Septic Tank, a full service septic system service company

If you are in need of a septic system, there are four different types to choose from. The soil types and absorption rates of how the waste water will drain (perk) are the most important factors to consider when selecting the appropriate septic system for your home. There are pros and disadvantages to each system type, and the study of each system type via the use of a perk test will decide the alternatives available to you as a homeowner when it comes to selecting a septic tank. The septic tank contractor will be able to assist you in selecting the most appropriate solution for your residential or commercial septic waste system.

The two major septic kinds will be a normal septic system and a septic tank system.

Standard Conventional Septic Systems

Generally speaking, there are two types of typical standard systems: those that integrate chambers and those that will employ a gravel basis in the drain field. Traversing at least 3 feet deep and laying out leach rock in the trenches to aid in proper sewage / waste water drainage are typical features of a conventional gravel system. The term “leach rock” refers to the leach rock that is laid out in the trenches to aid in proper sewage / waste water drainage. The standard chamber type is one of the more recent and more suited methods; septic systems that employ chambers instead of leach stones are becoming increasingly popular among septic installers and septic tank contractors.

In addition, the depth of the

Alternative Septic System

When is it necessary to use an alternate septic system? When your soil is rocky, hard, or has a high water table, you will need an alternate approach since it will prevent waste water from effectively draining and filtering the bacteria through the soil. It will be determined by a perk test what sort of septic system you will require, as well as how large and thorough your alternative system will need to be. What is involved in installing and operating an alternate sewage disposal system, as well as how much area coverage you will require for a sand-based leach field, are all explained in detail.

It is in this tank that sediments settle and some organic material decomposes as a result of the waste water entering it. The waste water is subsequently transferred to the recalculating tank and pushed through the system.

Septic System Plumbing Advice

Plumbing Guidance for Your Home Improvement Projects This is your greatest opportunity to obtain a more comprehensive grasp of septic system plumbing. It is critical that you study as much as you can today, before any problems arise in the future. Make use of the excellent suggestions offered in this article.

Online Septic Research

The Environmental Services Department of Maricopa County maintains a database that contains all of the county’s existing approved septic systems for the purpose of preservation. Please keep in mind that property owners are responsible for maintaining accurate records of the location and maintenance of their septic system for the duration of the system’s life.

Alteration Permit

An Alteration Permit will be required for onsite systems that have a failing tank or disposal field.

Abandonment Permit

An Abandonment Permit will be required for any onsite systems that are to be abandoned in order to connect to the municipal sewage system or that are to be taken out of operation.

Research

Option 1: You may perform your own study at no cost by using the Online Septic Search Tool (available at no expense). Option 2: You can call the Environmental Services Department and ask for a more in-depth search to be undertaken (fees will apply for research conducted by the department for each parcel).

  • Researchers charge a cost of $30 for research requests that take 3 to 7 business days. Expedited researchers charge a $60 price for research requests that take 1 to 2 business days. Septic Research Request Form.

F.A.Q.

1.) Is it necessary to get the septic tank emptied on a regular basis? You are eliminating the sludge that has settled at the bottom of your tank, which allows the greywater to drain into your leach fields when you pump out your septic tank. Is it necessary to get my septic tank drained on a regular basis? Every 3-5 years, we recommend that you get your septic tank drained. The amount of pumping required is decided by the size of the tank and the number of people that reside in the house. Please contact us so that we can assist you in determining your appropriate pumping schedule.

Concrete and fiberglass are the most typical materials used to construct septic tanks.

The majority of septic tanks are buried between one and four feet beneath the surface of the earth.

Leave a Comment

Your email address will not be published. Required fields are marked *