Who Does Septic Tank Inspections? (Correct answer)

There are two types of septic inspections: Visual inspections – usually done by the home inspector when selling or buying a house and it includes asking questions about the property and the house, when was the last inspection and so on.

orlandobuyersbroker.com

  • During a septic tank inspection, a septic expert will assess the condition of your septic tank and check for any issues. The most common things to check are the size of the tank, leakage, sludge level, and the drainage field. Checking for leaks is very important. Leaks can cause your system to malfunction and create a very big mess.

What should I look for when inspecting a septic system?

There are three things a septic system inspector will check during an inspection including the integrity of the septic tank, the proper function of the distribution box, and a leach field that is working as intended. If all three of these components are working correctly you will have passed the septic inspection.

How often should a septic tank be serviced?

As a general rule, you should only need to empty your septic tank once every three to five years. That being said, the actual frequency will vary depending on your usage and how many people are living in your home.

How do you know your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

What are signs of septic tank problems?

7 Warning Signs Your Septic System Is Failing

  • Gurgling Pipes. They would occur when you run water in the house (e.g. when using the sink or shower) or flush the toilet.
  • Bad Odours. It’s never a pleasant experience when this occurs.
  • Water At Ground Level.
  • Green Grass.
  • Slow Drainage.
  • Blocked Pipes.

How long can a septic tank go without being pumped?

You can wait up to 10 years to drain your tank provided that you live alone and do not use the septic system often. You may feel like you can pump your septic tank waste less frequently to save money, but it’ll be difficult for you to know if the tank is working properly.

Do septic tanks get serviced?

Inspect and Pump Frequently Household septic tanks are typically pumped every three to five years. Alternative systems with electrical float switches, pumps, or mechanical components should be inspected more often, generally once a year. A service contract is important since alternative systems have mechanized parts.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

Does heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

Septic System Inspections

Nick Gromicko, CMI®, and Kenton Shepard wrote this article. A septic system is a system that collects, processes, and disposes of waste water and solids that are generated by a building’s plumbing system. When the solids are partially broken down into sludge, they are separated from the liquid effluent (water) and scum in a septic tank (fat, oil and grease). Effluent is discharged from the tank on a regular basis into a drainfield, where it is naturally filtered by microorganisms and re-enters the groundwater supply.

The septic system should be tested at least once a year, and it should be done immediately before putting the house on the market for sale.

Prospective home buyers who have not recently had their septic system checked should insist on having the system checked before they acquire the property, since it is in their best interests.

When it comes time to examine or pump the tank, this is typically not a problem.

  • The placement of the tank should be depicted on a “as-built” design of the home. These designs are frequently kept on file by municipal health and zoning departments. It is possible that older systems do not have such a record. It is possible to get in touch with the previous owner
  • Modern tanks are equipped with risers that protrude clearly above the ground surface. It is possible to probe a suspicious location using a thin metal rod that has been placed into the soil. It is critical to do this carefully and only on soft, damp soil in order to prevent harming the tank and its accompanying pipelines. Another option is to use a shovel, although this will need a little more effort. If a sufficient number of tank components are made of metal, a metal detector can be utilized. A tiny radio transmitter that can be flushed down the toilet and followed by a receiver can be used to communicate. The grass that grows the most lushly in a yard is frequently seen just over the sewage tank. Snow melts more quickly above the tank than it does in the rest of the yard. While they are not failsafe techniques of finding a place, they have been shown to be beneficial in the past.

The tank’s placement should be depicted on a “as-built” design of the home. A lot of times, these drawings are kept with municipal health and zoning departments. Perhaps no such record exists in older systems. It is possible to get in touch with the prior homeowner; and Modern tanks have risers that are visible above the level of the ground. It is possible to probe a suspicious location using a thin metal rod that has been placed into the ground. It is critical to do this carefully and only on soft, damp soil in order to prevent harming the tank and its accompanying pipework.

If there are enough metal tank components, a metal detector can be employed.

Besides that, snow melts more quickly above the tank than it does anywhere else on the property.

  • Find out when the tank was last pumped by looking at the date on the tank. The sludge level should ultimately indicate if a tank has to be pumped, although having a record of past pumping dates might be useful as a reference. Using a “sludge judge” or a similar instrument, determine the amount of sludge present. It is normal for sludge to collect on the tank bottom, but it should not take up more than one-third of the tank’s total capacity or climb to the level of the baffles. The septic tank and drainfield should be located far away from wells and streams, for obvious reasons. Make certain that the system is large enough to accommodate the household it serves. A 1,200-gallon tank is normally required for a four-bedroom house, for example. The number of people that live in the house determines the size of the tank that is necessary. The tank’s capacity in gallons may be computed based on the size of the tank. For rectangular tanks, the capacity in gallons is equal to the product of the length, breadth, and depth in feet multiplied by 7.5. For circular tanks, the capacity in gallons is calculated as 3.14 times the radius squared x the depth in feet multiplied by 7.5. Check the ground surface for any liquid waste that has found its way to the surface. This is an unclean state that signals that the system is overburdened and needs to be repaired. In order to prevent wastewater contamination of groundwater and groundwater from flowing into the tank and causing it to overfill, make certain that it is waterproof. The presence of a riser lid should be checked for cracks and the integrity of the lid should be checked as well. Check to see that the baffles are securely attached to the tank’s inlet and exit pipes. It is recommended that each drain line receives the same quantity of wastewater. By opening the distribution box, you will be able to see what they are made of. If the box becomes tipped or blocked, it will distribute effluent in an excessively large amount, and it may even flood areas of the drainfield.

In a septic tank, baffles are components that restrict wastewater entry to a sufficient degree to guarantee that particles are distilled and that solids (as well as scum) are not discharged into the drainfield. It is via this process that they are able to protect the soil’s absorptive quality and hence extend the life of the entire system.

They are often constructed of the same materials as the septic tank, which might be fiberglass, steel, or concrete in construction. Inspectors should look for the following things in baffles:

  • The baffle is covered in solids. This should be reported as soon as possible because it implies overflow. There is evidence of prior overflow due to chemical and water erosion. Ideally, the sewage level should be several inches below the baffle top of the drain. A lower level implies leakage, whereas a greater level indicates obstruction.

Inspectors should be familiar with the following facts so that they may advise their clients about the various ways in which they might cause harm to their septic system:

  • The only thing that can be flushed down the toilet is bath tissue. Tampons, paper towels, cigarette butts, and diapers should all be disposed of in the garbage. In order to prevent microorganisms in the septic system from being damaged by household chemicals such as gasoline, paint, medicine, antifreeze, or pesticides from being flushed, they should never be put down the toilet or down the sink. In little volumes, detergents and bleach can make their way into the plumbing system. There should be no driving on or near the drainfield unless absolutely necessary. Their weight might cause damage to subsurface plumbing without them realizing it. There should be no other vegetation grown over the septic tank and drainfield. Roots from trees and huge bushes can create harm that is not visible. People are not permitted to excavate or construct structures on top of a drainfield. Ensure that any water drainage from rains, sump pumps, or any other source of surface water is routed away from the drainfield. An over-saturated drainfield can cause the water treatment process to be slowed down and plumbing fittings to get clogged. Fixing leaking faucets and toilets as soon as they occur is a simple method to extend the life of a septic system and avoid having to pay for an expensive replacement. Any waste of water in the home should be avoided at all costs. Taking shorter showers and avoiding using the garbage disposal are two examples of strategies to conserve water.
  • It is not recommended that inspectors enter the septic tank to search for cracks. Tank interiors are extremely filthy, and entering should be avoided at all costs. The fracture will most likely be located at the level of the effluent, which will have drained from the tank via the crack if one is there. An effluent level that is much lower than the level of the tank outflow is a clear indicator of the presence of a fracture. A tank that has flaws that enable sewage to escape into the surrounding soil is effectively a cesspool and should be removed as soon as possible
  • If the water comes from the tank, it indicates that the septic system is overburdened and has to be repaired. Sometimes, inspectors will use a dye that is flushed down the toilet to confirm that the water is coming from the residence and not from somewhere else. Despite the fact that this metric might be beneficial, it is not an accepted means of testing the operation of a septic system. A malfunctioning septic system will be confirmed if dye from the flushed dye shows in the puddle
  • However, a working septic system is not guaranteed if dye does not appear. It may take many days for the dye to develop, and it may be too diluted to see properly
  • It is outside the scope of a standard house inspection to evaluate a septic system, and this needs specialized skills. Laws differ from one jurisdiction to the next, and inspectors should be well-versed in them before providing this job. They should disclaim all responsibility for any component of the septic system examination that they did not do
See also:  How Much Does It Cost To Have My Septic Tank Pumped? (TOP 5 Tips)

Septic systems are meant to manage hazardous waste, and they may pose major health risks to both residents and inspectors if they are not properly maintained. Precautions include the following, in no particular order:

  • Solid waste should be removed from septic tanks by a professional septic tank pumping service, not by an inspector. No one else should be allowed to enter a tank unless they are a licensed and properly equipped professional. Noxious gasses such as methane can induce asphyxiation and death in a matter of minutes. When a septic tank begins to exhibit indications of fragility, proceed with extreme caution! Collapse has the potential to be deadly. Keep an eye out for tanks with rusted metal, improvised lids, or anything else that seems to be in unsafe condition.

In conclusion, septic system inspections should be conducted on a yearly basis to verify that the system is operating properly. The septic tank is the most expensive household fixture, and it will have a much shorter lifespan if it is not properly cared for and maintained.

Septic Inspections When Buying or Selling a Home

You could be perplexed as to why you might want an aseptic examination before selling your house. Alternatively, are you purchasing a new home that has a septic system? Get professional information on septic systems and collaborate with a seasoned real estate agent throughout the process. Prospective home buyers typically engage an inspector to do a thorough assessment of the property before making an offer on it. The examination will typically involve a visual evaluation of the house’s structure as well as a search for pests.

Septic inspections are extremely important for your health and the health of anybody else who lives in your house, so homeowners should make a point of scheduling them on a regular basis.

In case you are buying or selling a home, the septic inspection will be an important part of the process.

What is a septic system?

One in every five homes in the United States is equipped with a septic system, yet you’d be shocked how many people are unaware of what they are. A septic system is a system that is designed to remove waste from a home or building. During normal operation, it collects and filters water and garbage from the washer, sinks, showers, and toilets before returning it to the sink. The mechanism then re-distributes the energy back into the earth. The entire procedure contributes to the reduction of water and soil pollution.

How often should you get a septic inspection?

The majority of specialists agree that you should get your septic tank examined at least once every three to five years. The examination normally takes place around the same time that you should have your septic tank pumped by a professional septic tank cleaning provider. In order to keep your septic tank healthy and in excellent functioning order, it is required to pump it regularly. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners wait considerably longer than this period.

At that point, inspectors will frequently recommend that you repair or replace your septic system, which can cost thousands of dollars if not done properly.

Maintaining frequent inspection and pumping will not only save you money on costly repairs in the future, but it will also help you avoid any unpleasant surprises if you decide to sell your home in the near future.

How is a septic inspection done?

Septic tank inspections are recommended at least once every three to five years, according to most experts. You should have your septic tank pumped out at the same time as the inspection, which is normally around the same time as the inspection. In order to keep your septic tank healthy and in adequate functioning order, you must pump it on a regular basis. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners choose to wait far longer than five years.

Inspectors will frequently recommend that you fix or replace your septic system at this stage, which can cost thousands of dollars.

Visual Inspections

If you are buying or selling a home, the home inspector will most likely do a visual assessment of the property. In order to do a visual examination, a few questions must be asked, such as the age of the house, how often the owner pumps the septic system, and when the previous inspection was performed. The inspector will next flush all of the toilets in the house and run all of the water in the house to ensure that the water pressure is enough and that everything is draining correctly. At the end of the inspection, the inspector will walk out to the drain field to ensure that there is no standing water, which might indicate the presence of a cesspool.

Full Inspections

A thorough inspection contains all that a visual inspection does, but it also goes above and beyond that level of service. This is the inspection you’ll want to have done every three to five years, at the absolute least. Inspectors will remove the lid from the septic tank and assess the amount of water in the tank during a comprehensive examination. The level of the water might indicate whether or not the water is draining adequately. The inspector will next run water through the home to ensure that it is correctly draining from the house to the septic tank and that the water level within the tank does not rise as a result of the additional water being introduced into the system.

Dye tests are conducted to determine how much dye is incorporated into the water that is draining and how much of it makes its way into the sewage treatment plant.

Inspecting the backflow level will reveal whether or not there is an issue with your drain field.

It is therefore necessary to check the flow level once again to ensure that every part of the septic system is functioning properly and that there are no obstructions. Morse Engineering and Construction can provide you with further information. Source:listwithclever.com

Buying a House? Make Sure You Get a Septic System Inspection!

If you are in the process of purchasing a home, you are aware that there are several phases involved in the process. You put money together for a down payment, go to open houses, chat to sellers and real estate agents, and ultimately discover a place you love to call home. The exciting part is about to begin. There are several steps involved: making an offer, getting pre-approval, scheduling a home inspection, and eventually, after heaps of paperwork, claiming ownership of the property. But hold on a minute!

  1. You might be asking why you would need to get your septic system inspected.
  2. Septic systems that are in poor working order can cost hundreds of thousands of dollars to repair or replace.
  3. When a roof leak occurs or a break in the foundation occurs, you would want to be aware of the situation.
  4. “All OK, but I’ve already completed a house inspection and a dye test.” “Doesn’t that suffice?” While these inspections may be sufficient to meet the criteria of a lender, they are insufficient to provide a full evaluation of a septic system.

What is a septic system inspection?

Performing a septic system inspection entails a thorough examination of all of the components of a septic system. The inspector will determine the location and condition of the septic tank, distribution box, and absorption area and make recommendations. In this process, he will uncover and evaluate all of the mechanical and electrical components of the system, including septic lines, baffles and filters, pumps and floats, alarms, and so on. During the inspection, he will open the septic tank (digging up the lids, if required) in order to check the wastewater sources from the home to the septic tank and physically inspect the septic tank at its operational level, according to the manufacturer’s specifications.

If the home has been vacant for an extended period of time or if the number of people living in the home is expected to increase, the inspector will conduct a hydraulic load test to determine whether the septic system’s absorption area is capable of handling the anticipated daily wastewater volume of the home buyer’s family.

For septic systems in Pennsylvania, this implies that the inspector must have received training and certification from the Pennsylvania Septage Management Association (PSMA), which has created a set of requirements for an objective septic system assessment.

Each PSMA septic system inspection finishes with the delivery of a thorough report.

However, while this analysis does not provide a guarantee, the findings drawn from it may be able to save you thousands of dollars in septic system repairs or replacement.

If you do not have a PSMA inspection and report, you run the danger of inheriting the financial burden of substantial septic system repairs or perhaps the installation of a whole new system completely.

Septic System Inspection vs. Home Inspection

Inspections of the inside and exterior of a home are performed by professionals who are well-versed in the identification of typical faults. They will inform you if there are any evident issues with the roof, windows, electrical system, interior plumbing, foundation, or any other visible components of the house. A house inspection, on the other hand, is just a visual assessment that is non-invasive. Consequently, house inspectors only report on the components of the home that they can physically see, and nothing else.

  1. This implies that the septic system is not included in the scope of a standard house inspection.
  2. There is a good chance that they may flush the toilets a few times to ensure that the system is not actively backing up, and they may even remove the cover from the septic tank (if they can find it).
  3. How can a home inspector tell you what condition your septic tank is in if there isn’t a pump truck available to empty it?
  4. Despite the fact that home inspectors are well-versed in many aspects of the property, they are neither equipped nor prepared to conduct a thorough examination of a septic system.
  5. Rely on a PSMA inspector that specializes in septic systems to provide you with the most thorough and insightful septic system inspection available.

Septic System Inspection vs. Dye Test

Dyes are used in a dye test to check that wastewater is appropriately routed into the septic tank and not elsewhere on the land. Dyes are brightly colored and non-toxic, and they are safe to use. In layman’s terms, a dye test demonstrates that water can travel from point A to point B. At the time of a dye test, a technician will flush dye tablets down the toilet and down the drain, check to verify that the right wastewater sources are entering the septic tank, and walk about the property looking for dye.

In the absence of a dye test, it is impossible to determine the size or condition of a septic tank.

Dye tests provide little information on the operation of critical septic system components such as baffles, pumps, floats, and alarms, among others.

When purchasing a property, don’t take a chance on a future filled with septic system failures and expensive repairs.

For a complete septic system inspection, rely on the PSMA-certified inspectors at Hapchuk, Inc. to conduct the work for you. Our professionals will supply you with all of the information and help you want in order to confidently acquire a house that has a septic system installed.

Don’t Forget The Septic Inspection When Buying a House

Septic system inspection is mandatory if you are planning to purchase a property that contains a septic tank. There are several things that may go wrong with septic systems, and with any sort of system, there is the potential for various problems to arise. Is it necessary to have a septic examination performed before purchasing a home? Before closing on a home, you should find out if there is an issue with the septic system that has to be addressed. The problems that might arise with a septic system can range from basic repairs to extremely sophisticated replacements that can cost tens of thousands of dollars or more.

How The Septic System Works

A septic system installed on a home property can be used in place of a municipal sewer system in some cases. In the United States, 25 percent of residences have decentralized systems, also known as septic systems, which are permanent components of our nation’s wastewater infrastructure, according to the Environmental Protection Agency. It all starts with the sanitary pipe that runs from the home and delivers waste water to the septic tank at the bottom of the hill. This big container is normally composed of concrete, fiberglass or steel, although it can also be made of plastic or aluminum.

  1. This tank collects wastewater from the home and allows particles to settle to the bottom of the tank, where they form a “sludge” layer that can be seen on the bottom of the tank.
  2. This scum layer forms a seal, which helps to keep air out of the tank, allowing bacteria to grow in the tank below.
  3. The area between the sludge and the scum is referred to as the effluent area.
  4. A T-shaped outlet is located inside the tank, which allows effluent to flow into the leach field by gravity, while baffles prevent scum and particles from passing through the tank and into the leach field.
  5. This box permits the effluent to flow uniformly into the proper chambers of the leach field, therefore reducing the risk of contamination.
  6. The final outcome is the same regardless of the method employed: the delivery of effluent into the leach field.
  7. There are a variety of various alternatives available when it comes to the sorts of chambers that may be employed.
  8. Leaching’s ultimate goal is to enable effluent to trickle down into the subsoil, where microorganisms in the top layers of soil continue to break down elements from the tank.
  9. Leach Field in a Residential Setting As you can see, a septic system is involved in a great deal of activity.
  10. A large number of homeowners are completely unaware of the importance of providing continuous maintenance, care, and cleaning for their septic systems.
  11. The results of the examination will be used to decide whether or not the tank needs to be emptied.

The cost of inspection and pumping might range between $300 and $500, depending on the location and size of the tank. The cost of maintenance is substantially less than the cost of repair or, in the worst case scenario, replacement of the equipment.

The Septic Inspection

If you’re doing the inspection as part of a house purchase, you’ll want to synchronize the scheduling of this test with the date of your regular property inspection to ensure that both tests are completed at the same time. Thus, if there are any issues with the plumbing systems of the home, these may be brought to the notice of the home inspector and documented in the inspection report. Additionally, grouping these inspections together will help you stay on schedule for any inspection contingency-related deadlines that you may be up against in the future.

See also:  How Much Clorox Can You Put In A Septic Tank? (Solution)

At this point, you’ll be gathering documentation and obtaining answers to any queries you may have in preparation for the real inspection.

Because the system is underground, no examination can locate everything without excavating, which is unfeasible given the system’s location.

Here is a list of questions you should be prepared to answer before the inspection begins:

  • Is it possible that the system has ever been pumped? This one is significant since it is the only genuine maintenance issue that the seller would be required to have completed
  • It is also the most expensive. The seller’s knowledge of the location of the septic system is critical because if the seller does not know where the septic system is located, it is doubtful that they have performed continuous maintenance. Septic System Location Map – Regardless of whatever institution is in charge of supervising septic systems in your region, they should have a map of the septic system location given by the original home builder on hand. This is a critical piece of documentation for the septic inspection. It should not only display the position of the tank, but also the location of the leach field and the number of leaching Chambers
  • If there is any available history on the system’s maintenance – for example, something like:
  • The frequency at which the system has been pumped
  • What type of contractor was employed
  • Obtain any maintenance records that may exist
  • Have there been any issues
  • If so, have they been resolved?
  • Where have all the covers gone? -Manhole coverings should be installed over the tank’s chambers to prevent water from entering the tank. This will be the method through which the technician will get access to the tank in order to test and/or clean it.

Putting together this information will serve two purposes: first, it will assist the technician who will be inspecting the system in knowing what to check for, and second, it will provide you with an understanding of how the house seller maintained the system.

The On Site Inspection

Putting together this information will serve two purposes: first, it will assist the technician who will be inspecting the system in knowing what to check for, and second, it will provide you an idea of how the house seller maintained the system during the home selling process.

Additional Resources

  • Bill Gassett discusses the Massachusetts Title 5 Septic System Law
  • Luke Skar discusses home inspection tips for buyers. Find out how to analyze home inspection priorities with the help of the Shelhamer Group. The Ultimate Home Buyers Timeline – Danny Margagliano
  • The Ultimate Home Buyers Timeline

Septic Inspections: 6 Questions You Need to Ask

You might be wondering why you would need a septic check before you put your house on the market. Alternatively, are you purchasing a new home that has a septic system? Get professional information on septic systems and collaborate with a seasoned real estate agent throughout the process. Prospective home buyers typically engage an inspector to do a thorough assessment of the property before making an offer on it. The examination will typically involve a visual evaluation of the house’s structure as well as a search for pests.

Septic inspections are extremely important for your health and the health of anybody else who lives in your house, so homeowners should make a point of scheduling them on a regular basis.

In case you are buying or selling a home, the septic inspection will be an important part of the process. Here is all you need to know about it.

Need help in the home selling process?

An experienced Partner Agent can assist you in navigating the choppy waters of business.

What is a septic system?

One in every five homes in the United States is equipped with a septic system, yet you’d be shocked how many people are unaware of what they are. A septic system is a system that is designed to remove waste from a home or building. During normal operation, it collects and filters water and garbage from the washer, sinks, showers, and toilets before returning it to the sink. The mechanism then re-distributes the energy back into the earth. The entire procedure contributes to the reduction of water and soil pollution.

The septic tank is where the water and trash from the residence are disposed of.

The liquid rises to the top of the container and passes through an absorption zone.

A layer of gravel serves as a drain field, allowing water to pass through it before entering the soil.

How often should you get a septic inspection?

A septic tank inspection is recommended at least once every three to five years, according to the majority of professionals. The examination normally takes place around the same time that you should have your septic tank pumped by a professional septic tank cleaning provider. In order to keep your septic tank healthy and in excellent functioning order, it is required to pump it regularly. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners wait considerably longer than this period.

At that point, inspectors will frequently recommend that you repair or replace your septic system, which can cost thousands of dollars if not done properly.

It can cost as much as $25,000, depending on the location of the system and the terrain of the land where the new system is being installed on the new system.

How is a septic inspection done?

A septic tank inspection is recommended at least once every three to five years, according to most experts. You should have your septic tank pumped out at the same time as the inspection, which is normally around the same time as the inspection. In order to keep your septic tank healthy and in adequate functioning order, you must pump it on a regular basis. Even though professionals recommend that homeowners get their septic tanks tested every five years, many homeowners choose to wait far longer than five years.

Inspectors will frequently recommend that you fix or replace your septic system at this stage, which can cost thousands of dollars.

It can cost as much as $25,000, depending on where the system is installed and the geography of the land where the new system is installed.

Maintaining regular inspection and pumping will not only save you money on costly repairs in the future, but it will also help you avoid any unpleasant surprises if you decide to sell your home in the future.

Visual Inspections

If you are buying or selling a home, the home inspector will most likely do a visual assessment of the property. In order to do a visual examination, a few questions must be asked, such as the age of the house, how often the owner pumps the septic system, and when the previous inspection was performed. The inspector will next flush all of the toilets in the house and run all of the water in the house to ensure that the water pressure is enough and that everything is draining correctly. At the end of the inspection, the inspector will walk out to the drain field to ensure that there is no standing water, which might indicate the presence of a cesspool.

Full Inspections

A thorough inspection contains all that a visual inspection does, but it also goes above and beyond that level of service. This is the inspection you’ll want to have done every three to five years, at the absolute least. Inspectors will remove the lid from the septic tank and assess the amount of water in the tank during a comprehensive examination. The level of the water might indicate whether or not the water is draining adequately. The inspector will next run water through the home to ensure that it is correctly draining from the house to the septic tank and that the water level within the tank does not rise as a result of the additional water being introduced into the system.

Dye tests are conducted to determine how much dye is incorporated into the water that is draining and how much of it makes its way into the sewage treatment plant.

Inspecting the backflow level will reveal whether or not there is an issue with your drain field.

How much do septic inspections cost?

The cost of a septic inspection varies based on the level of detail with which they check the tank and the size of the tank, but for a 1,000-1,500 gallon tank, a comprehensive examination normally costs $300 to $600. Remember to inquire with your local health department to see if they provide inspections at a reduced rate. Keep in mind that the cost of evaluating your septic system may vary depending on who or what firm is doing the inspection. In certain areas (such as Texas), you are not need to obtain a license or certification order in order to examine sewage treatment plants.

A license in a number of sectors, both within their state and on a national level, will be held by the most competent inspectors.

How long do septic systems last?

Septic systems may endure for up to 25 years — and in some circumstances, indefinitely — depending on the conditions. Maintaining the system is critical to its overall performance and reliability. If you get your concrete septic tank inspected on a regular basis and make repairs as needed, it can endure for a lifetime or even longer.

Should I repair or replace my septic system?

Here are a couple of things to keep an eye out for.

Puddles in Your Yard

A smart option is to have an inspector come out and assess your septic system if there is any standing water in your yard over your septic system. Take precautions to keep yourself and your animals away from the water, since it may be contaminated with hazardous substances.

Backups

Having a significant number of plumbing backups is a symptom that something is wrong with your septic system. It might be anything as simple as a small repair or as complex as a complete tank replacement, among other things. In either case, an inspector will be required to determine the situation.

Healthy Grass

If the grass over your septic area is greener than the grass in other sections of your yard, it’s time to get your septic system inspected and cleaned. In the event that a septic system begins to fail, it releases more water into the ground, which might benefit your plant life but can also be hazardous to human health.

Results of an Inspection

Unless your assessment reveals tainted well water or irreversible damage to the septic tank itself, you will almost certainly need to replace your system.

How to Maintain Your Septic System

Tampons, paper towels, baby wipes, and any other foreign materials that cannot break down readily in your septic system should never be flushed down the toilet to ensure that your septic system lasts as long as possible. If you have a garbage disposal, use it to help break down any food that would otherwise block the pipes in your home. Make sure you never throw oil down the sink since it might clog up the septic tank and cause it to overflow. Try to choose a laundry detergent that is also safe to use with septic systems.

You should make certain that your sump pump is not connected to your septic system before starting.

Selling a House with a Septic System

Some counties do not need a septic examination prior to a home sale, however others demand a thorough investigation before a home sale. Check with your county’s health department to see whether you are required to have a septic examination performed prior to selling your home. Completing your own pre-inspection might also assist you in identifying any potential problems. If the seller is aware of any concerns with the septic system, the law compels them to provide this information to the buyer before closing.

Both sellers and purchasers are perplexed as to who is ultimately responsible for repairing damage to the septic system. Repairing the septic system is normally the responsibility of the seller, although you may be able to negotiate prices as part of the transaction.

Buying a House with a Septic System

Purchasing a home with a septic system necessitates answering a few questions. Here are some of the most important:

  • What is the age of the house
  • When was the last time you had your septic tank examined and pumped? Have you had any septic tank back-ups or standing water problems? Whether or if the septic tank has been repaired is unclear.
See also:  What Can You Do With The Septic Tank Drain Field? (TOP 5 Tips)

In addition, you’ll want to make certain that a third-party inspector does a comprehensive examination. When hiring an inspector, it may be tempting to hire someone who will go through the inspection fast and sign off with a gold star. However, you may end yourself acquiring a property that has a slew of issues down the future as a result of this decision. If you want assistance in locating a reputable inspector, your realtor will most likely be able to provide suggestions. In general, septic systems are quite efficient, as long as they are properly maintained.

You may also keep it in good condition by not flushing any non-biodegradable or harmful substances down your toilet.

Instead of doing it yourself, why not consult with a professional?

To get started, please call us at 1-833-2-CLEVER or fill out our online form today.

Related Articles

In order to avoid difficulties, get your septic system examined every one to two years by a professional septic tank contractor and follow his or her recommendations for how often to clear out the tank to prevent backups. Alternative septic systems that involve mechanical components, such as a pump, should be examined at least once a year, or more regularly if advised by the manufacturer, to ensure that they are in good working order. A septic tank contractor will do the following tasks:

  • Find the location of your septic system and any access holes
  • To ensure that the interior slabs or tees (baffles) are in excellent shape, open the inspection port. Identify whether or not your system has an effluent filter and whether or not this filter needs to be cleaned. The homeowner will be notified when the filter needs to be cleaned via an alarm mechanism installed in some filters.
  • Make sure to flush your toilets. Make a visual inspection for evidence of sewage or wastewater backup. Measure the thickness of the scum and sludge layers
  • Identify any leaks that may exist
  • If there are any mechanical components, they should be inspected. Tank cleaning (pumping) is recommended if necessary. Make a visual inspection of the ground above the drainfield for sogginess or ponding, which might indicate poor drainage, a blocked system, or excessive water use. A drainfield inspection, which is a distinct operation, may be recommended by the contractor.

Read Septic Tank Inspection – What Should I Expect When I Have My Tank Inspected for a more in-depth description of the inspection procedure. both from the National Small Flows Clearinghouse, as well as Drainfield Inspection —Does My Drainfield Ever Need To Be Inspected? (pdf), both from the National Small Flows Clearinghouse (NSFC).

Tags

Everyone has undoubtedly heard the expression “it’s a filthy job, but someone has to do it.” After all, failure to periodically examine and repair your septic tank may result in a slew of unpleasant tasks to complete – and that’s not at all nice! Now, let’s take a look at what aseptic system inspection comprises and why it’s necessary.

The reasons for needing a septic tank inspection

Everyone has undoubtedly heard the expression “that’s a filthy job, but somebody has to do it.” For starters, failure to do routine maintenance on and inspection of yourseptictank may result in a slew of nasty duties, none of which are very enjoyable. Let’s take a look at what aseptic system inspection comprises and why it’s so crucial to do.

The types of septic inspections

Septic inspections may be divided into two categories:

  • Visual inspections– These are normally performed by a home inspector when a house is being sold or purchased, and they include asking questions about the property and the house, such as when the previous inspection was performed, and so on. By running water and flushing all of the toilets in the property, the inspector may determine whether or not the water pressure in the house has been compromised. Cesspools, standing water, and the drain field will all be checked by the inspector as part of his inspection. This form of examination is quick and convenient, but it cannot tell you much about the condition of your septic tank, including whether it is healthy and safe. Full inspection is nearly identical to visual inspection, with the exception that it involves a considerably more extensive inspection. This is carried out by professionals and highly trained specialists who are equipped with the necessary equipment and tools for the job. The time period during which inspectors examine the water level in your septic tank to assess whether or not the water is draining properly. Additionally, they will do a few of checks to ensure that everything is in working condition before they proceed with the pumping.

The importance for frequent septic tank inspections cannot be overstated, as these checks not only save you money, but they also help to keep you and your family, as well as your property, healthy and safe.

Get in touch with us right now for additional information or to schedule your next septic inspection.

The 10 Best Septic Tank Inspection Services Near Me

Septic system technicians are responsible for pumping septic tanks. Professionals in various states will be subject to a variety of licensure and certification requirements. Check to see that the firm you employ is licensed and certified, that it is a reputable business, and that it has the necessary insurance. Unless you employ an experienced expert from the beginning, damage to your septic system might result in thousands of dollars in cleaning and repair costs. Pumping the contents of your septic tank out will be done by a septic tank business who will use an industrial-strength vacuum line linked to a tanker truck.

To remove all of the sludge and scum from the tank, professionals may employ an instrument known as a septage spoon, which is designed to release hard waste from the tank’s sides.

It is then transported to a waste management treatment center, cesspool, or other designated dumping location where the waste will be disposed of.

Septic Tank Inspections

When purchasing or selling a house, it is strongly suggested that you get your septic tank inspected beforehand. For our firm, we have seen many new homeowners have some very significant – and expensive — problems after acquiring their new home because they did not have a full, professional septic tank examination performed before closing on the property. In most cases, this is done at the same time that a house inspection is performed. **** Please keep in mind that the majority of house inspectors do not perform a comprehensive septic system check.

Here are some solutions to frequently asked questions for your convenience:

  • Someone must be present on the property in order for us to do a septic tank check. We exclusively work for and arrange inspections with the individual who is paying for the inspection. In order to schedule an inspection visit, we must first get a signed agreement from the person who will be liable for the payment, as well as any necessary county documents. The person who is accountable for the invoice will receive an email including a report indicating whether the inspection was successful or unsuccessful. This individual will be the only one who receives the report through email. As soon as our inspectors get on the scene, they will attempt to find the septic tank for no more than 30 minutes. In the case that we are unable to discover the tank, or if we do locate the tank but it is more than two feet deep in the ground, or if the tank is beneath something that stops us from getting to the tank, we will be required to charge a service fee. After we open the septic tank lid, we will pump the tank and take notes on the tank condition and the components of the septic tank. We will only dig up to two feet to the lid of the tank. Additionally, the field lines will be examined to determine whether or not they are saturated. Our approach of preventing the individual who pays for our inspections from purchasing or selling a house that requires expensive septic tank maintenance is to have the system fail.

Who should I contact if I want a full septic examination performed? Installation and repair of septic systems by a septic business that is properly licensed. A firm that does not repair, install, and pump tanks on a daily basis is not one that I would suggest calling. It is likely that folks who do this on a daily basis have seen or witnessed system failures that are not visible to others who do not do this on a regular basis. The following are the steps involved in a septic inspection: First, make a phone call to make an appointment.

  1. Third, the paying party or someone on your behalf must be on the premises during the whole inspection process.
  2. 4.
  3. In order to discuss everything that will take place during the inspection, acquire all necessary information, and clarify what is expected by the paying party, the scheduling procedure takes around 30 minutes over the phone.
  4. You might wonder why.
  5. Because there are a variety of factors that might influence the price of the inspection and because we need to be able to address difficulties that could arise and result in the inspection not being completed, we must meet in person.
  6. You will also need to speak with your realtor or the county environmentalist in order to obtain a copy of the plat of your septic system that the county has on file for your home.

Because these records are critical to our ability to accomplish our work, we must have them. What procedures are carried out during a septic check, and why?

  1. Prior to arriving at the job site, our staff will contact you via phone. Because we will not enter your premises without your permission, please make sure you answer the phone as you would for any of our tasks. Make certain that you or someone representing you is present on the premises throughout the inspection period. A driveway or road will be used to park the pump truck, which will be the most convenient point of access to the tank. It is impossible for us to drive our trucks on grass because of the weight of the vehicle. Our driver will find the tank and hand dig up to 2 feet into the ground to get access to the tank’s lid and begin the inspection procedure. (This is all finished assuming that there are no difficulties with the location, system, or other factors.) After that, our employees will load his items back into the truck, collect payment, and depart. He’ll finish up his examination and discuss any issues that arise with the owner when he returns to the office at the end of the day
  2. The office staff enters all of the information into the system within 24 hours of the day of service and emails the documentation to the client.

Things to consider before scheduling a septic examination include the following factors: The field lines cannot be accurately read if the home being examined has been empty for an extended period of time and the system has not been in use. Inspections of septic systems are only valid on the day of the inspection. We are unable to provide a warranty for an examination of a system since anything might happen between the time of the inspection and the following day. Here are a few illustrations:

  1. Field lines were crushed by a dump truck as it drove over them. A realtor pays for the inspection, the deal falls through, and a new buyer comes along three months after the first one. Although this inspection is no longer relevant due to the fact that septic systems and field lines do not endure indefinitely, the homeowner decides to take the house off of the market and make further modifications before re-listing the home. A big patio off the back of the home was constructed as an extra enhancement. Problem is, they poured the concrete over the septic tank itself, and as the concrete was being poured, the driver drove over the field lines, crushing them
  2. This was a mistake.

We could go on and on with examples for the rest of the day and yet not cover every situation we have encountered. We hope you find this information to be helpful! If you have any questions, please don’t hesitate to contact us!

Leave a Comment

Your email address will not be published. Required fields are marked *