Where Does A Septic Tank Run From Your House? (Solution)

We’re sure you know, your septic tank is installed along the sewer line that extends from your home and into the yard. In the basement or crawl space of your home, you should be able to find a four-inch sewer pipe that will lead the way to your septic system.

• How Far Does a Septic Tank /Field Need to Be From a House? Well, when it comes to having either a septic tank or field, you need to have it placed at least five feet away from your home. However, most tanks are placed even farther, commonly around 10 feet away in most cases and the leach fields are placed at around twenty feet away from the home.

How do I find out where my septic tank is?

Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.

How far away should a septic tank be from the house?

Local codes and regulations that stipulate the distance of the septic tank from the house vary depending on the locale, but the typical minimum distance is 10 feet.

How is a septic tank connected to a house?

The septic tank is connected to the house by a single main drainage pipe also called inlet pipe. The water waste from your home goes through it and into the septic tank where solid and liquid waste are separated from liquid.

How deep is the pipe from the house to the septic tank?

A typical septic tank has a 4-inch inlet located at the top. The pipe that connects to it must maintain a 1/4-inch-per-foot slope toward it from the house. This means that for every 10 feet of distance between the tank and the house, the inlet must be 2 1/2 inches below the point at which the pipe exits the house.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Can I build a porch over my septic tank?

You should never build a deck over a septic field; doing so will prevent the natural draining and dissipation of the effluent. This can ruin the septic system, not to mention releasing foul smells into the air all around your deck. The dissipating effluent can also rot the deck from underneath.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

• Your Drains Are Taking Forever.
• Standing Water Over Your Septic Tank.
• Bad Smells Coming From Your Yard.
• You Hear Gurgling Water.
• You Have A Sewage Backup.
• How often should you empty your septic tank?

Are septic tanks still legal?

Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

Does shower water go into septic tank?

From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.

What does it mean if a house has a septic tank?

What Is A Septic Tank? A septic tank gathers wastewater – waste generated by your toilet, garbage disposal and washing machine – from your house and holds it underneath the yard. Solids remain in the tank while liquids exit into a buried drain field.

Is septic tank better than sewer?

Although septic systems require a bit more maintenance and attention, they have a number of advantages over sewer lines. Since they don’t pump wastewater long distances to be processed at a water treatment facility, they use less energy overall and have a smaller environmental impact.

How deep are drain fields buried?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

How deep should a septic tank be in the ground?

The general rule of thumb is that most septic tanks can be buried anywhere from four inches to four feet underground.

How much dirt should be on top of a septic tank?

Each layer should be uniform, no greater than 24 inches thick, and of nearly equal heights around the perimeter of the tank. However, compaction under the haunch (bottom curvature of some tanks) is best done in 6- to 12-inch layers.

How Your Septic System Works

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Specifically, this is how a typical conventional septic system works:

1. Underground wastewater treatment facilities, known as septic systems, are typically found in rural locations that lack access to centralized sewage systems. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-proven technology. One of the most common types of wastewater treatment systems is comprised of two parts: the septic tank and the drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic materials and extract floatable substances (such as oils and grease) and solids from the wastewater. These systems discharge the liquid (referred to as effluent) from the septic tank into a series of perforated pipes buried in the soil or into chambers or other specific devices designed to gently release the effluent into the soil over time. Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, and phosphorus, among other contaminants. Prior to discharging wastewater into the environment, several alternative systems are designed to evaporate or disinfect the waste.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

• You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

• Taking a look at the “as constructed” drawing of your house
• Making a visual inspection of your yard for lids and manhole covers
• Getting in touch with a septic system service provider for assistance in locating it

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

• Water backing up into the drains of homes and businesses
• It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
• A strong stench emanating from the area surrounding the septic tank and drainfield

How Often Are Septic Tanks Emptied, and Where Do the Contents Go?

Water backing up into the drains of homes and businesses. It is most noticeable in dry times when the drainfield is lush and green. The presence of standing water or muddy soil near your septic system or in your basement. A strong stench emanating from the area surrounding the septic tank and drainfield; and

How to Run a Septic Tank Line From Your House

A septic system is made up of two lengths of pipe that are connected together. Initially, it runs from the house, where the system services are located, to a tank, where the waste is separated and solids settle out. The second section runs from the tank to the drainage field, where fluids from the tank are dispersed into the earth underneath the tank. The process of installing the first run of pipe is quite similar to that of installing a traditional sewage line. It is necessary to maintain a downhill slope to the storage tank.

Locating the Septic Tank

The tank serves as the nerve center of the septic system. It is required to be situated between the residence and the drainage field. Each and every septic installation must begin with a soil test, and depending on the results, soil conditions may necessitate the placement of the tank in a less-than-ideal site for digging sewer lines. Also required are minimum setback distances from property borders, functioning wells, surface water and other obstructions to provide a safe working environment.

Due to the fact that the tank intake pipe slopes toward the tank, the more away the tank is from the house, the deeper you must dig in the ground to reach it.

Tank Depth

A standard septic tank has a 4-inch intake at the top, which is positioned towards the bottom. Ideally, a 1/4-inch-per-foot slope toward the pipe from the house should be maintained by the pipe connecting to it. To put it another way, for every 10 feet of distance between a tank and a home, the inlet must be 2 1/2 inches lower than where the pipe departs the house at its lowest point. The pipe usually exits at ground level, although it may need to pass beneath a foundation footing or concrete pad in rare cases.

Digging the Trench

The trench for the septic pipe should be dug before the hole for the tank since you will need a backhoe to complete the work and the tank will get in your way if it is already in the ground. To allow rainfall to drain properly, the pipe should be placed on a 2- or 3-inch bed of drain rock, so remember to account for this extra depth when digging. It is normal to use a four-inch pipe, and it should be installed far enough down to link with the main soil stack, which is a three-inch pipe that runs vertically past the main bathroom and through the roof of the home.

Precautions

Local building and health agencies will demand permits for a septic tank installation. You will also be required to submit a design plan before the permits will be provided, so prepare ahead of time. This layout should be developed in collaboration with a local builder who is familiar with the unique characteristics of the topography in your neighborhood. Stay away from planting trees or plants near the tank, drainage field, or any of the pipe systems. They will be drawn to the pipes in their hunt for nutrition, and their roots will be able to successfully block them.

Removal may be both expensive and time-consuming.

How To Find My Septic Tank

1. What is a septic tank
2. How do I know if I have a septic tank
3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

“How can I locate my septic tank?” is one of the most often requested inquiries we receive.

When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.

The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.

In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

1. Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.
2. An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
3. Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
4. Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

• A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
• A septic system is likely to be installed in your home if you reside in a rather rural location.
• Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
• When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.

Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system. Your home’s building permit and drawings will almost certainly include details concerning the existence (or absence) of a septic tank on your site.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and notice that there is flooding or ponding water in the area around your septic tank — a sign that your system is overloaded and that an excessive amount of water is being used all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

1. If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
2. The county health department is responsible for keeping track of septic systems.
3. A septic tank’s position could be depicted on a survey map, for example.
4. The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

In this way, if you ever decide to sell your property, you will be able to supply the new owner with everything they will need to locate the tank and properly manage their septic system.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
6. When the snake comes to a complete halt, it has almost certainly reached the tank.
7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation.

However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

• Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
• Directly in front of the home Immediately adjacent to your well (if you have one)
• In close proximity to trees or densely planted regions
• In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

How Far Should You Put the Septic Tank From the House?

Image courtesy of Kwangmoozaa/iStock/Getty Images.

In This Article

• Image courtesy of Kwangmoozaa/iStock/GettyImages.com

For those who don’t have access to a municipal sewage system, an alternate solution, such as a septic tank and field lines, will be required.

The design and operation of these systems are fairly straightforward. When designing a septic system, you must keep in mind the requirements of local construction codes as well as public health concerns.

Tip

Depending on where you live, local ordinances and regulations that specify the distance between the septic tank and the home vary. However, the normal minimum distance is 10 feet between the two structures. Consult your local ordinances and regulations for a detailed answer as to how far your septic tank must be installed from your home. Requirements differ from one location to the next, although the standard minimum distance from the home is 10 feet in most cases. In the case of a private well for drinking water, however, keep in mind that many state departments of health demand a minimum distance of 50 feet between a new septic tank and a well.

It is possible that the septic tank will be placed considerably closer to the structure since it will be easier and require less plumbing in some cases.

Basic Safety Considerations

If you’re the type of person who prefers to do things on their own, there are certain important measures you should take before starting this endeavor. Before you start digging the hole for the tank, call your local utility providers to find out where the service lines are located. A gas line, water line, phone line, or electrical connection that has been severed is not only potentially dangerous, but it may also be extremely expensive to repair. Once you have finished excavating the hole, proceed with caution.

It’s also important to understand that a concrete septic tank can weigh up to 5 tons.

Make sure the hole is available when the tank is delivered so that it can be installed straight in the desired location.

Tips for a Successful Installation

Plan ahead of time to get your water supply switched on prior to installing your septic tank. You must fill the tank with water as soon as it is placed in its final position for this to be possible. This has absolutely nothing to do with the septic system itself, but it is a prudent precaution. In the event of a heavy downpour, the groundwater may swell and a septic tank may float out of the ground, even if it has been buried. If this occurs, contact a qualified professional immediately. Repairing any damage done to the lines or to the tank itself, as well as putting the tank back in its original location, may be a costly and time-consuming endeavor.

Initially, you may be confident that you will remember the exact location of the marker when it is time to top up the tank — which is generally every three to five years — but your memory may fade over time.

In the absence of a marker, you may end up digging holes in the wrong place when it is time to service the tank.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

• A layer of sludge settles to the bottom of the container.
• 4.
• Scum is mostly constituted of fats, greases, and oils, among other substances.
• Grease and oils float to the surface of the water.
• (5) A filter stops the majority of particles from reaching the exit pipe.
• The effluent is discharged into the drain field.
• Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
• The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
• Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

• Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to eliminate the sludge and scum that has built up within the tank. It is possible, however, to do harm to or even destroy a septic tank if you are not familiar with how the system functions.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Inspections and pumping should be performed on an ongoing basis. The Sludge Judge is a device that allows you to examine the level of sludge in your own home if you are not afraid of heights. There are several internet retailers who sell it for $100 to $125. In the event that you discover that your tank is one-third full of sludge, contact a contractor to come pump it out for you.

Septic tank filter close-up

The need of regular inspections and pumping cannot be overstated. However, if you are not afraid of being queasy, you may verify the sludge level yourself using a contraption known as The Sludge Judge. It costs between $100 and $125 and is easily accessible on the internet. You should contact a contractor as soon as you realize your tank is one-third full with sludge.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

1. Gravel and soil operate as biological filters, purifying wastewater as it lowers into the earth (see figure above).
2. Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
3. The majority of filters don’t need to be cleaned until the tank is pumped, which happens every two to five years on average.
4. A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.

In addition to flushing plastic waste, nonbiodegradable goods, and cigarettes will clog the system. For additional information on what should and should not be flushed down the drain, contact your local health authority. More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

• Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

Buying a Home With a Septic Tank? What You Need to Know

As a result of its ability to supply filtered water to depleted aquifers, Jim vonMeier believes that septic systems are the solution to America’s water deficit.

As an advocate for septic systems around the country, he speaks at conferences, gives lectures, and appears in court. For septic system inquiries, as well as information on the operation of the septic tank, contact him through email or letter.

COUNT ON QUALITY COVERAGE.

Protect your assets and enjoy the peace of mind that comes with having Allstate insurance coverage. Request a quote Locate a representative.

How Does a Septic System Work?

A pipe gathers all of the wastewater from the residence and transports it to an underground septic tank that is completely waterproof. As explained by the Environmental Protection Agency, solids settle to the bottom of the pond while floatable items (known as “scum”) float to the top. Both are confined within the tank, which is emptied on a regular basis by a professional pumper. According to the Environmental Protection Agency, the middle layer includes liquid wastewater (also known as “effluent”) that exits the tank into a buried drainfield in the yard, where the wastewater disperses into the soil.

Is the Septic System Related to the Drinking Water System?

No. Many homes that have septic systems also have a private well to provide water. The septic system, on the other hand, is completely separate from the well. Rather of treating wastewater so that it may be consumed, its objective is to safely distribute it in a manner that prevents pollution.

What Differentiates One Septic System from Another?

According to the University of Nebraska-Lincoln, the size of the drainfield and the quality of the soil are the primary factors that distinguish one septic system from another. In addition, the drainfield must be large enough to accommodate the volume of liquid generated by a family. According to the Environmental Protection Agency, do not use a home’s toilet, sink, or disposal as a wastebasket for dental floss, coffee grinds, kitty litter, paint, or chemicals to avoid the chance of blocking the system.

How Often Should You Get Your Septic Tank Emptied?

To remove the sludge and scum from the septic tank, it is necessary to hire a professional to pump it. The frequency is decided by the size of the tank and the degree of activity in the home (how much wastewater is generated). According to the Environmental Protection Agency, most septic tanks should be emptied every three to five years. However, certain systems may require more frequent pumping – perhaps once a year if necessary.

What Are the Signs of a Failing Septic Tank?

In order to remove the sludge and scum from the septic tank, a professional must pump it. This is influenced by the size of the tank and the amount of activity in the house (how much wastewater is generated). The Environmental Protection Agency recommends that most septic tanks be drained every three to five years. It is possible that certain systems will require more frequent pumping than others, possibly as frequently as every 12 months.

What About Maintenance Costs?

The size of the tank and drainfield, the accessibility of the tank, and the distance that waste must be taken for disposal all influence the cost of septic system upkeep. According to the Environmental Protection Agency, pumping a tank might cost between $250 and $500.

What Should I Do Before Buying a Home With a Septic System?

Learn about the laws in your state. Some states demand a septic system examination prior to transferring ownership. However, even if your state does not need an inspection, your lender may require one anyhow. As a rule, conventional house inspections do not involve an examination of the septic system. Zillow reports that an inspection may provide a detailed assessment of the system’s integrity, identify whether it is located at an appropriate distance from a well (to minimize contamination), and check the absence of invasive tree roots in the drainfield, which could cause damage to the system.

If you do need to replace your system, the cost might vary significantly.

Owning a property with a septic tank does not have to be a frightening experience. You will be able to enjoy your home for many years to come if you do regular maintenance and upkeep.

Related Resources:

Image courtesy of istockphoto.com The word “septic system” in a home ad is well-known for scaring away potential purchasers from the property. Some homebuyers may consider the system to be obsolete, expensive to fix, or difficult to keep up to date. Septic systems, on the other hand, do not have to be frightening. A septic tank and its accompanying parts may easily endure for decades if they have a good maintenance record and are properly inspected on a regular basis. Don’t instantly rule out an attractive property because it has this sort of system buried out back if you’re contemplating booking a viewing appointment.

Continue reading to learn more about septic systems, including how they function, common misunderstandings about them, how to maintain them, how to locate a septic system inspector, and indicators that a septic system is in danger of collapsing.

1. How do septic systems work?

Water that has been filtered by a septic system is called effluent. There are several components, including a big septic tank, distribution box, baffles, and a drainfield, all of which are buried below ground. Septic fields and leach fields are other names for the drainfield, which is a network of perforated pipes that extends out from the septic tank and allows filtered wastewater to be released back into the environment through the soil. The wastewater from your home, including that from toilets, sinks, showers, and appliances, is channeled out of the house and into the tank through the pipes.

The accumulation of particles over time offers a luxury home for helpful anaerobic bacteria, which work to break down the materials and release the grease, oil, and fats that have accumulated on the surface (the scum).

The residual wastewater (also known as effluent) runs via outlet pipes into a disposal bed or drainfield, where it is slowly and securely filtered by the earth, allowing it to be recycled.

2. What are common misconceptions about septic systems?

A lot of people have misconceptions (and even falsehoods) regarding septic systems, and this may make it difficult to decide whether or not to purchase a property that has one. Take a moment to put some popular myths and misconceptions in their proper perspective.

• A septic system is no longer used by most people. Actually, according to the Environmental Protection Agency (EPA), approximately 20% of homes are equipped with a septic system, or one in every five residences. Septic systems fail on a regular basis. According to the Environmental Protection Agency, a septic system can last up to 40 years—and possibly even longer—with proper maintenance. Septic systems have a foul odor. It is unlikely that an improperly managed septic system will release any unpleasant smells. An odor emanating from drains or the septic system itself indicates that there is a problem. A septic system has the potential to pollute a well. Installed correctly and maintained on a regular basis, a system will not cause contamination of a well on the property. To guarantee proper separation of drinking water and wastewater, the Centers for Disease Control (CDC) recommends that the system be installed at least 50 feet away from a well. The septic system will be examined during a house inspection. A house inspection is often focused on the systems within the home, and as a result, it seldom includes more than a cursory examination of the septic system. Look for a professional that understands the workings of a septic system and how to do a comprehensive inspection in order to obtain a complete picture.

3. How do you maintain a septic system?

Septic systems require regular care and maintenance in order to function properly. The good news is that keeping a septic system in excellent working order is rather straightforward. Here’s how to keep it in proper functioning order.

• Take cautious with the information you submit over the system. Pouring anything down the toilet should be avoided at all costs. This includes things like paint and chemicals, kitty litter, coffee grinds, disposable wipes, diapers, and feminine products. These are all potential clog-makers in the septic system. It is best not to use any additives in the system. Additives may be classified into two categories, according to the National Small Flows Clearinghouse, which are chemical and biological. Despite the fact that these solutions are touted to accomplish anything from speed solids breakdown to enhance the condition of the drainfield, they typically cause havoc on the bacteria that are intended to keep the system running smoothly. Keep vehicles away from drainfields and never park or drive over them, since this might cause damage to the pipes. When planting shrubs or trees near a drainfield, use caution to avoid damaging the plants. The roots of some water-loving plants, such as weeping willows, can find their way into the drainfield, outlet pipes, or even the septic tank system itself. According to the Virginia Cooperative Extension, a fair rule of thumb is: if a tree will grow to be 25 feet tall, it should be kept at least 25 feet away from the drainfield
• If a tree will grow to be 25 feet tall, it should be kept at least 25 feet away from the drainfield
• Get your septic tank pumped out by a professional septic provider on average every two or three years. An further visual inspection of the component is often performed at the same time by a qualified specialist
• Call a specialist as soon as you see any signs of impending failure (as indicated below)! The sooner you contact, the less expensive a repair may be

Image courtesy of istockphoto.com

4. How do you find the best septic system inspector?

Once an offer on a home is made, the deal is nearly always subject on the outcome of a thorough inspection of the property, which includes an examination of the septic system. Important to remember is that what is stated on a seller’s disclosure form is not a substitute for a thorough inspection of the property being offered for sale. The average homeowner does not have the necessary knowledge or equipment to conduct a thorough inspection of the system. If there are concealed issues, it is possible that the homeowner will not be aware of them.

• One of the most common types of house inspection is a general home inspection, which evaluates the structure of the home, systems within it (such as plumbing and electricity), roof condition, and maybe some of the external features.
• As a result, always seek the services of a septic system specialist for an inspection.
• Your neighbors and real estate agent may be able to provide you with a few decent leads.
• To begin, contact each possible inspector and ask them about their approach to the task; for example, some may use cameras to evaluate the distribution box and drainfield, while others may dig to complete their inspection.
• Once the inspection has begun, the expert will search for pumping and maintenance records, examine for signs of leakage or backup, measure the levels of sludge and scum, and determine the age of the tank, among other things.
• Depending on whether or not the property includes extensions that were built after the septic tank was originally installed, an inspector may give recommendations to make the residence more sanitary.

For example, a two-bedroom home will require a tank of a different capacity than a three-bedroom home will. Image courtesy of istockphoto.com

5. What are the signs that a septic system needs to be replaced?

It is critical to notice the warning symptoms of impending failure before they manifest themselves. For the most part, failure of a septic system goes unnoticed at first. Keeping an eye out for warning indicators will help you arrange a replacement before something goes wrong.

• Gurgling noises coming from outside sewers
• Interior drains in bathtubs and sinks that are slow to drain
• Odors emanate from the sewage treatment plant, drainfield or inside drains of the house. There are wet places visible over the drainfield. Water is backing up into the home from the sewer line. Toilets are flushing more slowly
• This is a problem. A sudden and dramatic increase in the amount of lush and full vegetation over the drainfield might indicate a probable obstruction or break in the exit pipes outside.

Image courtesy of istockphoto.com

Final Thoughts

Septic systems, which are used in around 20% of homes in the United States, are designed to remove effluent from a residence. While septic systems may need a bit more maintenance than utilizing a public sewage system, they are not nearly as difficult to maintain as their reputation would have you believe. A well-maintained septic system may survive up to 40 years if it is inspected on a regular basis and kept on the lookout for indicators of potential problems. It is critical for homebuyers contemplating a property with a septic system to have the system inspected by a professional before making an offer.

FAQs About Septic Tanks and Septic Systems

When it comes to septic systems, there is a lot to understand. Even after reviewing the information provided above, you may still have concerns regarding how septic systems operate and how to properly manage them. Answers to some frequently asked questions concerning septic systems are provided here.

Q: How does a septic tank work?

When sewage is discharged into a septic tank, the solid stuff descends to the bottom, where it is colonized by helpful anaerobic bacteria, which work to break down the solids and liberate the lipids contained within them. The byproducts rise to the surface of the tank and are separated by a series of baffles.

Q: What are the three types of septic systems?

Traditional septic systems are classified into three types: chamber septic systems, drip distribution systems, and septic systems with chambers. In most cases, conventional systems are employed in residential buildings. Typically, a chamber system is used in high water table settings due to the fact that it is comprised of a succession of closed compartments. Drip systems are often less difficult to install, but they require more upkeep.

Q: How many years does a septic system last on average?

According to the Environmental Protection Agency, a well managed septic system may survive for 40 years. It is essential that you get the septic system evaluated before to purchasing a property so that you can get an estimate of how long the septic system is projected to operate.

Q: What is the alternative to a septic tank?

An aerobic treatment system, composting waste, and a drip system are all options for replacing a septic tank in a residential setting.

Q: What chemicals are bad for a septic tank?

The use of chemicals such as oil-based paint, paint thinners, lubricants, gasoline, weed killers, foaming cleansers, and chlorine-based cleaners can cause damage to your septic tank. They have the potential to pollute the surrounding environment as well as destroy the bacteria that are necessary for waste breakdown inside the septic tank, making it difficult or impossible for matter to degrade. Septic systems are well-understood by professionals. Link up with reputable professionals in your region and obtain free, no-obligation quotations for your project.+