What To Flush To Open A Clogged Septic Tank? (Correct answer)

If you experience a clog in your drain, here are a few of the safe ways you can go about unclogging it.

  1. Pour Hot Water Down the Drain. If you have a clog in your drain, one of the easiest methods you can use to try to remove it is pour hot water down the drain.
  2. Baking Soda and Vinegar.
  3. Septic-Safe Drain Cleaners.

How do you unclog a drain if you have a septic system?

  • How Do You Unclog a Drain if You Have a Septic System? How Do You Unclog a Drain if You Have a Septic System? If you have a clog in your drain, water may not drain as it should. Typically, when this occurs, you purchase a bottle of chemical drain cleaner and throw some down the drain.

What breaks down sewage in a septic tank?

The septic tank has microbes, especially bacteria, which break down and liquefy the organic waste. In phase one, the wastewater is introduced into the septic system where solids settle down to form the sludge and scum layers as the anaerobic bacteria digest the organic waste.

Will toilet flush if septic tank is full?

Toilets Flush Slowly When your septic tank is excessively full, your toilet may start acting odd. You might find that your toilet doesn’t fully flush or flushes very slowly and odd noises occur when you flush your toilet. These noises usually sound like gurgling or bubbling.

How do you dissolve sludge in a septic tank?

One is to inject air into the tank to try and mix the contents and break down the solids. The more common method is to use a mechanical mixer that acts somewhat like a baking mixer where the contents are mixed until they form a slurry that can be withdrawn by the vacuum pump.

Does hydrogen peroxide hurt septic tanks?

Will Hydrogen Peroxide harm my septic system? No – Septic systems rely upon “aerobic bacteria” which thrive in an oxygenated environment. Unlike chlorine/bleach, Hydrogen Peroxide adds oxygen instead of removing it.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

What eats sludge in septic tank?

One example of a homemade remedy is to flush ¼-½ a cup of instant yeast down your toilet. The yeast eats away at the sludge and helps loosen it, breaking it down so that wastewater can get through.

Clogged Drain or Clogged Septic Tank?

Robs Septicon is the author of this piece. Postings under Uncategorised A blocked septic tank can cause difficulties that are quite similar to those caused by a clogged drain. Knowing the difference between the two might assist you in taking care of your house. Here’s all you need to know about the situation. When a septic tank overflows, why do drains become clogged? The septic tank is a holding tank that is located underground. All of the wastewater from the house flows into the septic tank, which steadily fills up with garbage over time.

Towards the top of the tank, there is a pipe that flows into the yard, into an area known as the drain field, where the tank is located.

The dirt filters the water and kills the bacteria that are there.

It is possible for the septic tank to fill up without any water draining out if the line feeding into the drain field becomes plugged.

  • As the water rises via the main line, the capacity of fixtures in the house to drain correctly diminishes.
  • The drains will become sluggish if the septic tank is just half blocked, as the water strains to make its way down into the septic tank.
  • What Are the Signs of a Septic Tank Clog?
  • It might be difficult to detect the difference at times.
  • Due to the fact that they are the most closely associated with the septic tank, the lower drains in the home will be affected first when the septic tank overflows.
  • In addition to being more sluggish, they may begin to produce unusual noises, such as gurgling sounds, as they age.
  • Local clogs often only impact a single fixture or a small number of fixtures that are linked to it.

If all of the other fixtures in the house are operating properly, this is an indicator that there is a blockage in the house rather than in the septic tank itself.

A blockage in a septic tank should not be repaired by someone who has just rudimentary expertise or who lacks the necessary instruments.

In certain cases, you may be able to address the problem yourself if you suspect that the blockage is in the pipe rather than in the septic tank.

Allow for an hour or two for the mixture to settle in the pipe before using it.

Depending on how large the blockage is, this may be sufficient to empty the pipe.

An auger is made out of a long, rigid cable with a pointed, twisting end at the other end.

A plumber may be required if neither of these approaches proves effective in clearing the clog from the drain.

Chemical drain cleaners have the potential to kill beneficial bacteria in your septic tank, which could lead to another clog in the future.

Clogs in septic tanks can occur for a number of different reasons.

Many septic tanks require pumping every three to five years, depending on the size of the tank.

Exactly What Should You Do If You Suspect You Have a Septic Tank Issue?

An inspection by a septic tank company will allow them to determine whether or not the tank needs to be pumped.

Rob’s Septic Tanks, Inc. can provide you with additional information about clogs and septic tanks. We’ll be happy to answer any questions you have and provide you with additional information.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

  1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.
  • Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
  • However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.
  • Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.
  • If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.
  • Advertisement
  • s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.
  • Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.
  • 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.
  • If at all possible, take a shower or bath as soon as possible after working on your septic tank
  • When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.
  • 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.
  • Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.
  • 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.
  • Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.
  1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.
  • If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.
  • 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.
  • It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
  • 3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.
  • It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.
  • 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it
  • If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.
  • Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.
  • It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.
  • 6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished
  • Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.
  1. 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement
  1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
  2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.
  • Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.
  • As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
  • 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.
  • It will also save you money on your utility bills if you keep your water consumption to a minimum.
  • 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.
  • Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.
  • 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping
  • Not every septic system will be equipped with an effluent filter
  • However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.
  1. 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement
See also:  What Is Average Price Of Septic Tank Cleaning? (Solution)

Create a new question

  • Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
  • Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
  • Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
  • They are available.

Inquire about something There are 200 characters left. Include your email address so that you can be notified when this question has been resolved. SubmitAdvertisement

  • Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Advertisement

Things You’ll Need

  • Hose
  • Paper towel
  • Mechanical auger
  • Safety glasses
  • Work gloves

About This Article

The writers of this page have together authored a page that has been read 314,893 times.

Did this article help you?

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

It is not pleasant to clean up after yourself after having to deal with a clogged drain, as anybody who has done so knows. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from doing its function.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Water is intended to go down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train itself. Though it is most often the result of something that was flushed down the toilet, the source of the problem can sometimes be found deep inside the heart (and pipes) of the septic system itself. Septic system backups may be caused by tree roots.

Obviously, if this is the case, you’ll want to consult with a specialist right away! Perhaps the issue is due to the freezing of septic lines. It is possible for your pipes to freeze during the winter months if they are not buried at the right depth. This will prevent water from freely flowing.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

See also:  How Far Should A Pond Be From Septic Tank? (Question)

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

How Do I Unclog a Septic Leach Field

Heavy particles can collect in septic field lines and clog perforations, causing the lines to fail to drain properly. The majority of septic systems that are more than 20 years old exhibit this characteristic.

In certain cases, when an older septic system fails to drain properly, it is a symptom of tree roots obstructing the lines, problems with surrounding soils, structural damage to a pipe, or an improperly designed system.

  1. A sewer jetter may be used to clean perforated PVC septic leach field lines with an ID ranging from 2″ to 6″
  • With the use of a sewage jetter, you may scrape away sticky sludge and flush out unclean residue, which can help lessen the need for repeated cleaning of the lines. In addition, the Needle NoseTM drain cleaner has a stronger, braided steel jacket as well as a distinctive compact nozzle tip that allows it to pass through a wider range of drain types and sizes. A gaspressure washer with a flow rate of 2.0 GPM to 4.0 GPMis frequently necessary, because septic sludge can be difficult to scrape and flush out of the line without a lot of force. Electric pressure washers do not have enough force to clean and rinse away the thick muck
  • Instead, they use water. In most cases, it is advisable to find and expose septic lines by digging a large enough hole under the downhill end of each septic line to allow sludge to run out and collect while you clean the opened line. Another option is to find and expose the distribution box, and then manually feed the sewer jetter through each of the lines that exit the box after it has been exposed. While it is possible to properly flush the sludge upward toward the opening box, it is more difficult, and you will need to pump out the heavy residue that runs back into the box. Starting at an uphill entrance or distribution box, the septic field lines should be allowed to drain or be pumped free of standing fluids so that they contain mostly biomat particles, because nozzle jets provide little cleaning and flushing action when fully submerged in liquid. For further information, please see this 3-minute video (which is a segment of Steve Maxwell’s do-it-yourselfSeptic System Rescuevideo course)
  • Please keep in mind that a sewer jetter operated by your pressure washer will not be able to clean septic field lines constructed of flexible hose with an inside diameter of less than 2 inches, or septic fields made up of interlocking plastic chambers with an inside diameter of more than 6 inches. Important: If you suspect that there may be tree roots in the septic leach field lines, you should do the following: It is possible to loosen fine tree roots using a sewage jetter, and then pull out lengthy strings of roots by hand or with a leased motorized drum auger that is equipped with a root cutting blade if there are numerous fine tree roots. It is possible that you may need to start by renting a mechanical drum auger with a root cutting blade to loosen the tree roots, and then flush the line with a sewer jetter to eliminate any remaining septic sludge
  • However, this is not always necessary.
  • To clean the septic leach field with a sewage jetter, do the following:
  • Put on a pair of work gloves that are resistant to fluids and eye protection. If you have reason to assume that the drain contains drain cleaning chemicals, proceed with caution. Hook up the drain cleaner to your trigger gun, turn on the pressure washer, and then direct the nozzle at least a foot into the exposed septic field line entrance before you begin to apply the water. As you push the trigger, make sure to guide the sewer jetter into the line. Every few feet, draw back approximately halfway and then continue pushing ahead
  • This will provide a more complete cleaning. Immediately after you have done cleaning the pipe, remove the drain cleaner from the line. Use caution when releasing the trigger to prevent the water from flowing through the nozzle before it reaches the aperture. After that, repair any damaged fittings, inspect the system, and replenish the fill dirt.
  • If you’re not confident in your ability to complete any of these tasks, hiring a septic service business may be a better option in the long run. To locate a service firm in your region, do the following:
  • In order to get a recommendation for a firm that has performed comparable services for them, start by asking relatives, friends, and coworkers for recommendations. Search local directories such as Google Maps, Yelp, andCitySearch for service firms in your area that have received positive online reviews if you are unable to obtain a solid suggestion from someone you know. Don’t always believe reviews from persons who have written only a few previous reviews, or from those who exclusively provide favorable evaluations to everyone they interact with. You should be aware that even reputable service providers might receive a tiny percentage of unfavorable reviews for a variety of reasons that are not necessarily relevant to your situation. Choose an organization that has a large number of favorable, believable evaluations from customers who have had repairs identical to yours performed. After you have identified one or more service providers that appear to have a decent reputation, conduct an online search for the company’s name as well as the names of any persons who work for the company, if any. It is important to take into consideration both the positive and bad information you discover about the firm. Be aware that reputable service businesses may experience a backlog of several days at busy seasons, such as when temperatures are low, significant rain falls, or holidays fall on a weekend or holiday. In certain cases, high demand can be a symptom of a firm that has a large number of recurring clients

If you have any queries or comments, please do not hesitate to contact us.

How to unclog your leach field

A SHOCK TREATMENT CAN SAVE YOU UP TO $150. The leach field, also known as a drain field, is the area where effluent from the septic tank is disposed of. In this stage of the septic system, a network of perforated PVC drain pipes, crushed stone, and a layer of unsaturated soil are combined to form a septic system. Gravity is typically responsible for the movement of wastewater from the septic tank to the leaching bed. Nevertheless, when the conditions do not permit the use of gravity to transport the wastewater to the leaching bed, a pumping station can be utilized to transport the wastewater to the leaching bed.

Final filtering is carried out by the presence of bacteria and other microorganisms that further purify the wastewater before it reaches the groundwater table.

It does, however, become clogged from time to time.

How is a leach field made?

It is critical that the leaching bed functions well in the wastewater treatment system, and if it does not, the entire system will be adversely affected. It is also critical to prevent structural problems from occurring in the first place by ensuring that the building is designed correctly. As a result, only fully licensed contractors are permitted to do such a project. But, first and foremost, you will need to conduct a percolation test as well as a comprehensive review by an engineering professional.

A quick percolation rate is seen in sandy soils; whereas, a sluggish percolation rate is found in clay soils.

In order for a soil to be considered excellent, its percolation rate should not be too high or too low.

If, on the other hand, it takes more than an hour for the water to settle, this indicates that the effluent is not infiltrating quickly enough, which might result in backflow difficulties.

Steps followed when building a leach field

  • The moment has come to start digging the trenches after all of the testing have been performed and the building plan has been finalized and approved by the project team. The number of trenches that will need to be built depends on the size of the septic tank and the volume of wastewater that will be released into the leaching field throughout the construction process. Each trench should have the same breadth as the others (approximately 3-4 feet). In addition, the ditches should have a modest downhill slope to them. Following the excavation of the trenches, they should be filled with crushed stone. The crushed stone bed should be at least one to one and a half inches thick and evenly distributed throughout the ditches. This procedure is critical because it enables for more effective drainage of the effluent under the perforated pipes
  • Nevertheless, it is not required. The perforated pipes are then laid on top of a bed of crushed stone to allow for proper drainage. Crushed stone is then placed on top of the perforated pipes to ensure that they are securely attached — enough to prevent them from moving or getting misaligned over time. A layer of crushed stone between 1 and 3 inches thick should enough.
  • Following that, a geotextile membrane is laid over the crushed stones. When the membrane is in place, soil or dirt cannot slip between the crushed stones and cause a blockage in the leaching bed. If you haven’t already, install a drain line from the septic tank to the leach field pipes. Finally, the trenches are filled with dirt to make them more level and to make the surface of the leach field more consistent in appearance. After that, you may cover the area with a covering of grass. And, at all costs, avoid planting anything else in or near this part of the yard.

How long does a septic leach field last?

Weeping beds should last at least 25 years if they are well-maintained, but they may live much longer or shorter depending on a variety of conditions. The majority of leaching fields collapse as a result of biological or hydraulic overstress. Hydraulic overload occurs when an excessive amount of water is discharged into the septic tank. Consequently, it is advised that duties such as washing be spread out throughout the course of the week rather than being completed in a single weekend session.

When an excessive amount of organic material enters the leaching field, this is referred to as biological overloading.

The only solid waste that should be disposed of in your septic system is toilet paper and human waste (feces).

Additional to this, we advocate the frequent use of biochemical additives to improve the overall efficiency and lifetime of the system. Because of the high activity of the bacterial flora in your system, Bio-Sol’sSepti +can help to avoid biological overload in your system.

What is clogging your leach field?

The leaching bed, like the septic tank, is not meant to survive indefinitely. All leaching fields will need to be replaced at some point in the future. However, with careful care and maintenance, your leaching bed should last for many years, if not for a lifetime. The leaching bed utilizes aerobic bacteria on the receiving soil to filter wastewater before it reaches the groundwater table, preventing groundwater contamination. These bacteria decompose organic materials and aid in the elimination of viruses as well as the reduction of nutrients in wastewater.

Clogging in the leaching bed, on the other hand, causes this process to be slowed down, resulting in unavoidable environmental contamination.

See also:  How Do I Know If My Septic Tank Has A Filter? (Question)

Biomat

During the wastewater treatment process, a black, gelatinous layer forms beneath the distribution pipes as the wastewater passes through the leach field. Rather than sludge, this layer is really a biomaterial sludge known as “biomat.” Because the biomat is waterproof, it significantly minimizes the amount of wastewater that percolates into the soil. In most cases, this biomat is formed of organic waste and anaerobic bacteria that have attached themselves to the soil or broken stone. The organic stuff in the effluent provides food for these bacteria.

  • Contrary to this, it aids in the further filtering of wastewater by reducing the rate of infiltration and retaining the organic matter before the water is allowed to reach the soil.
  • More black gelatinous sludge builds up in the trenches, the more difficult it will be for the wastewater to permeate and subsequently percolate into the soil as a result of the accumulation.
  • As soon as sewage begins to back up, it will always flow to the spot that provides the least amount of resistance.
  • When this occurs, the objective should not be to entirely remove the biomat from the environment.
  • It is important to note that good care and maintenance of the system will assist in preventing such an imbalance, which will save you a great deal of headache (like having to unclog your leach field).

How do you know if your leach field is failing?

It goes without saying that the most visible indicator of a failing leaching bed is when wastewater overflows and reaches the surface. The effluent will rise to the top of the soil or, in certain situations, will pour out the end of the trenches if the receiving soil in the leaching bed is unable to absorb any more water from the receiving soil.

The most common reason for the effluent to stop flowing is due to an excessive amount of biomatis being created. Check out the following indicators to determine if you need to unclog your leach field:.

Sluggish drains and toilets

Prior to the drain field failing altogether, you may notice that water is draining through the home at a slower rate. The drains will continue to function as long as there is enough space for the water to flow. On the other hand, it is possible that the water is draining more slowly. If you neglect this problem, which is caused by the leach field, the situation will deteriorate over time and become more serious. It is possible that the septic tank will become overflowing and that the water will be unable to penetrate into the earth at all.

Septic odors

Septic tank scents might be detected in the vicinity of the leaching area or within the house itself. Another sign that the leaching field is failing is the presence of rust. Due to the fact that it is so uncomfortable, this is perhaps one of the easiest indicators to recognize. To determine if you are experiencing the rotten egg smell, first check to see if there has been a buildup of organic material in the plumbing system. You may either use an ecologically friendly drain cleaner (such as SeptiDrain) or check your septic tank for abnormally high water levels to resolve the problem.

Sewage backing up in the house

In the case of clogged septic fields, water is returned to them, which causes the water level in the septic tank to rise. Water will back up through the hole in the septic tank or into your home if there isn’t enough room left in the tank. The leach field in your septic tank is almost certain to be the source of the problem if you see an excessively high water level in the tank. The water level in the septic tank should always be at or below the level of the drain pipe that connects the tank to the leaching field.

It is thus required to determine whether the soil has been saturated as a result of recent high rainfall or snowmelt, as well as to determine whether there has been a recent hydraulic overload.

However, if the situation persists, we can conclude that the leaching bed is no longer operating correctly (it is most likely clogged).

Greener and taller grass around the drainfield

A sign that your leach field is not operating correctly is the presence of higher, greener grass in the area where it’s supposed to be placed. When wastewater is unable to penetrate the soil, pressure can force it to rise to the surface, causing it to become visible. Because of the nutrients in the wastewater, the grass might grow more quickly and seem greener as a result of this.

Puddles of water in the yard

Puddles on the field may indicate that a hydraulic overload has forced water to come to the surface. If this is the case, contact the field superintendent immediately. When a leach field becomes blocked, the pressure builds up, forcing the water to rise. Large amounts of wastewater can practically pool on the ground when released into the environment. If the water smells like rotten eggs, avoid touching it and keep your children away from the area until the scent has been eliminated.

There have been instances where perforated pipes in the leach field have either disconnected or broken. If a large car has passed by, it is possible that this is what is causing the sewage to back up. Otherwise, a blockage is more likely to be the source of the problem.

Soil sinking or collapsing over the leachfield

The presence of excessively damp soil where the leaching bed is placed may also be an indicator that the leaching bed is no longer performing effectively, according to the manufacturer.

How to unclog your leach field?

When you find an issue with your leaching bed, you should make an attempt to fix it as quickly as possible. If this is not done, the condition may worsen and result in wastewater overflows. Those spills are potentially hazardous to both you and the environment. Also prohibited is the pollution of the environment, and local authorities may order you to replace your septic system if you fail to comply with the law. In addition to promoting the growth of biomat, as previously described, the discharge of organic particles into the leaching bed generates an imbalance in the natural water filtration system.

  • As a consequence, a waterproof biomaterial sludge is formed, and this sludge significantly reduces the rate of infiltration of wastewater into the receiving soil, which is abnormal.
  • Because of this, it is necessary to minimize the accumulation of organic matter in leaching fields and to reduce the thickness of the sludge layer that clogs the leaching fields.
  • However, the one offered by Bio-Sol is without a doubt the quickest, easiest, safest, and most ECONOMIC method available!
  • These shock treatments are 100 percent environmentally friendly (and hence safe), and they are simple to do on your own.
  • It is typically necessary to introduce a high concentration of these bacteria and enzymes into the leaching bed in order to break down the organic waste that has collected in the leaching bed and unclog the leach field.
  • The result is that your septic system is back in operating order!
  • The majority of the time, this occurs when a large truck passes by.
  • If this is the case, you should use a camera to evaluate the area to ensure that there is no structural damage.

How much does a new leach field cost?

Choosing to repair your leaching bed will almost certainly necessitate the replacement of your complete septic system as well. You will require a fresh percolation test as well as an appraisal by an engineer with appropriate qualifications. When using a standard septic system, you may expect to pay between $5,000 and $12,500 for the installation and maintenance. However, if you require the installation of a more sophisticated system, the cost of the replacement will be significantly higher (between $15,000 and $30,000).

As a result, we highly recommend you to attempt to resolve the problem first by selecting one of the alternative options that have been provided.

PROMOTION TO ASSIST YOU IN UNCLOGGING YOUR LEACH FIELD: By visiting our monthly specials page, you can receive a discount on a shock treatment. To save even more money, click here: SAVE UP TO 150$ ON A SHOCK TREATMENT WITH THIS PROMOTION.

Conclusion

A blocked leach field will jeopardize the integrity of the entire system. It can result in sewage backups in the house, septic smells, sewage leaking on the yard, and groundwater contamination, among other problems. Unclogging your leachfield with shock treatment can help you to avoid these and other problems associated with leachfield failure in the future. It is the injection of billions of bacteria and enzymes into the sewage system through the use of biological additives that is known as shock treatment.

This septic-safe solution from Bio-Sol is manufactured from bacteria and enzymes, and it will clear your leach field without harming the bacteria or enzymes in your system.

Can Anything Unclog an Old Septic Drain Field?

When a drain field is installed, it is intended to allow liquid from a septic tank to sink into the earth. While the solids are dissolving and breaking down in the tank, the liquids are flowing from the tank and via pipes in the drain field, where they are released into the earth through perforations in the pipes. Solids dissolving and breaking down in the tank Due to the accumulation of material in the leach field, it is possible for it to get damaged or blocked over time. It is possible to have difficulties with a full septic tank since it allows solid waste and sludge to overflow into the drain field.

Shock the System With Bacteria

Septic system bacteria packets can assist in clearing blocked drain fields by encouraging waste material to decompose and drain through. This can also aid in the preservation of the health and extension of the life of your system. Bacteria enter the septic system through the toilet bowl, which is flushed every day. Most experts advocate using it once a month, however a greater dose and more frequent treatments may be necessary to cleanse the system first.

Reduce Water Usage

Reduce your water use to allow the drain field to dry up and the entire septic system to recover from its failure. Water conservation will keep a residence from surpassing the capacity of the septic tank and will allow the drain field to dry up more effectively. You may do this by only doing full loads of laundry and washing a full load of dishes at a time, as well as by repairing any leaky faucets or running toilets that may occur.

Avoid Harsh Chemicals

When chemicals are used in a septic tank, they inhibit the digestion of waste by killing the bacteria that aid in the breakdown of solids. Avoid flushing cleansers such as shower, tub, sink, and toilet bowl cleaners, as well as drain-clearing acids, down the toilet or down the sink or the drain. Make use of ecologically friendly cleaning items such as vinegar and baking soda instead of hazardous non-natural chemicals to keep your home clean.

Change to Gentler Toilet Paper and Soap

There are compounds in certain soaps that can interfere with microorganisms that break down sediments in the tank, which might result in difficulties with the drain field. In a septic tank, some varieties of toilet paper do not break down quickly and can add to the accumulation of particles in the tank. Solids breakdown and liquid flow are aided by septic system-friendly soaps and toilet paper, which will aid in the recovery of your drain field and the recovery of your drain field. Also, try to restrict your usage of waste disposal devices.

Coffee grounds and rice, among other solids, do not break down quickly in a septic tank and can contribute to sludge accumulation, which can lead to drain field clogging, among other things.

Contact a Septic Professional

If none of the measures listed above are successful in alleviating your drain field problem, it is possible that roots are infiltrating the pipes of your leach field or that the system is simply too old to function correctly. It is possible that a septic specialist will be required to assess what procedures should be performed.

My Toilet is Overflowing! How Can I Unclog It When I’m Using a Septic System?

It is never recommended to utilize drain cleaners or chemical clog removal solutions when you are dealing with a septic system. It is possible that these chemicals will harm your septic tank by killing enzymes and bacteria that help to break down waste in your tank. However, if your toilet is blocked or overflowing, you may be unsure of what to do if you do not have access to these drain cleaners. Here are a few methods for unclogging your toilet that do not need the use of chemical drain cleaning solutions.

If you have a toilet, you should always have a plunger and/or a snake on available to deal with any emergencies.

A plunger is a tool that employs suction to force air down the toilet and clear clogs from the system.

Used correctly, these two tools will be able to clear the vast majority of blockages that you may encounter in your toilet.

Bring a big pot of water to about boiling temperature on the stovetop, then pour it into the center of your toilet bowl.

Allow the water to make its way through your toilet before flushing the toilet.

Never use boiling water because the water may be too hot and can cause cracking in porcelain that is too cold.

It is safe to use on a septic system because it is made of natural ingredients.

After the baking soda has had time to settle, pour two cups of white vinegar over the top.

The fizzing motion will aid in the dislodgmentation of any obstructions within your toilet.

The objects you flush down your toilet and down your drains can all have an influence on your septic system’s performance.

In order to avoid this, it is critical to utilize septic-safe goods wherever possible. Items such as toilet paper, shampoo, cleaning supplies, laundry detergent, and dish detergent fall under this classification.

Leave a Comment

Your email address will not be published. Required fields are marked *